blob: 41acbb6dd6ab8b4583797f293b59a5686cff7b6a [file] [log] [blame]
Claudio Leite8c0ff7a2014-10-31 23:13:30 +01001/*
2 * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9/dts-v1/;
10
11#include "kirkwood.dtsi"
12#include "kirkwood-6281.dtsi"
13
14/ {
15 model = "D-Link DIR-665";
16 compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
17
18 memory {
19 device_type = "memory";
20 reg = <0x00000000 0x8000000>; /* 128 MB */
21 };
22
23 chosen {
24 bootargs = "console=ttyS0,115200n8 earlyprintk";
25 stdout-path = &uart0;
26 };
27
Claudio Leite8c0ff7a2014-10-31 23:13:30 +010028 ocp@f1000000 {
29 pinctrl: pin-controller@10000 {
30 pinctrl-0 =< &pmx_led_usb
31 &pmx_led_internet_blue
32 &pmx_led_internet_amber
33 &pmx_led_5g &pmx_led_status_blue
34 &pmx_led_wps &pmx_led_status_amber
35 &pmx_led_24g
36 &pmx_btn_restart &pmx_btn_wps>;
37 pinctrl-names = "default";
38
39 pmx_led_usb: pmx-led-usb {
40 marvell,pins = "mpp12";
41 marvell,function = "gpio";
42 };
43 pmx_led_internet_blue: pmx-led-internet-blue {
44 marvell,pins = "mpp42";
45 marvell,function = "gpio";
46 };
47 pmx_led_internet_amber: pmx-led-internet-amber {
48 marvell,pins = "mpp43";
49 marvell,function = "gpio";
50 };
51 pmx_led_5g: pmx-led-5g {
52 marvell,pins = "mpp44";
53 marvell,function = "gpio";
54 };
55 pmx_led_status_blue: pmx-led-status-blue {
56 marvell,pins = "mpp45";
57 marvell,function = "gpio";
58 };
59 pmx_led_wps: pmx-led-wps {
60 marvell,pins = "mpp47";
61 marvell,function = "gpio";
62 };
63 pmx_led_status_amber: pmx-led-status-amber {
64 marvell,pins = "mpp48";
65 marvell,function = "gpio";
66 };
67 pmx_led_24g: pmx-led-24g {
68 marvell,pins = "mpp49";
69 marvell,function = "gpio";
70 };
71 pmx_btn_restart: pmx-btn-restart {
72 marvell,pins = "mpp28";
73 marvell,function = "gpio";
74 };
75 pmx_btn_wps: pmx-btn-wps {
76 marvell,pins = "mpp46";
77 marvell,function = "gpio";
78 };
79 };
80
81 spi@10600 {
82 status = "okay";
83 m25p80@0 {
84 #address-cells = <1>;
85 #size-cells = <1>;
Rafał Miłecki943d45a2015-05-19 13:40:16 +020086 compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
Claudio Leite8c0ff7a2014-10-31 23:13:30 +010087 spi-max-frequency = <50000000>;
88 reg = <0>;
89
90 partition@0 {
91 label = "uboot";
92 reg = <0x0 0x30000>;
93 read-only;
94 };
95
96 partition@30000 {
97 label = "nvram";
98 reg = <0x30000 0x10000>;
99 read-only;
100 };
101
102 partition@40000 {
103 label = "kernel";
104 reg = <0x40000 0x180000>;
105 };
106
107 partition@1c0000 {
108 label = "rootfs";
109 reg = <0x1c0000 0xe00000>;
110 };
111
112 cal_data: partition@fc0000 {
113 label = "cal_data";
114 reg = <0xfc0000 0x10000>;
115 read-only;
116 };
117
118 partition@fd0000 {
119 label = "lang_pack";
120 reg = <0xfd0000 0x30000>;
121 read-only;
122 };
123 };
124 };
125
126 serial@12000 {
127 status = "okay";
128 };
129
130 i2c@11000 {
131 status = "okay";
132 };
133
134 ehci@50000 {
135 status = "okay";
136 };
137 };
138
139 gpio-leds {
140 compatible = "gpio-leds";
141
142 blue-usb {
143 label = "dir665:blue:usb";
144 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
145 };
146 blue-internet {
147 /* Can only be turned on if the Internet
148 * Ethernet port has Link
149 */
150 label = "dir665:blue:internet";
151 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
152 };
153 amber-internet {
154 label = "dir665:amber:internet";
155 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
156 };
157 blue-wifi5g {
158 label = "dir665:blue:5g";
159 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
160 };
161 blue-status {
162 label = "dir665:blue:status";
163 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
164 };
165 blue-wps {
166 label = "dir665:blue:wps";
167 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
168 };
169 amber-status {
170 label = "dir665:amber:status";
171 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
172 };
173 blue-24g {
174 label = "dir665:blue:24g";
175 gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
176 };
177 };
178
179 gpio-keys {
180 compatible = "gpio-keys";
181 #address-cells = <1>;
182 #size-cells = <0>;
183
184 reset {
185 label = "reset";
186 linux,code = <KEY_RESTART>;
187 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
188 };
189 wps {
190 label = "wps";
191 linux,code = <KEY_WPS_BUTTON>;
192 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
193 };
194 };
Andrew Lunndd5dc022014-10-31 23:13:31 +0100195
Andrew Lunn689168a2016-04-03 04:03:45 +0200196 dsa {
Andrew Lunndd5dc022014-10-31 23:13:31 +0100197 compatible = "marvell,dsa";
198 #address-cells = <2>;
199 #size-cells = <0>;
200
201 dsa,ethernet = <&eth0port>;
202 dsa,mii-bus = <&mdio>;
203
204 switch@0 {
205 #address-cells = <1>;
206 #size-cells = <0>;
207 reg = <0 0>; /* MDIO address 0, switch 0 in tree */
208
209 port@0 {
210 reg = <0>;
211 label = "lan4";
212 };
213
214 port@1 {
215 reg = <1>;
216 label = "lan3";
217 };
218
219 port@2 {
220 reg = <2>;
221 label = "lan2";
222 };
223
224 port@3 {
225 reg = <3>;
226 label = "lan1";
227 };
228
229 port@4 {
230 reg = <4>;
231 label = "wan";
232 };
233
234 port@6 {
235 reg = <6>;
236 label = "cpu";
237 };
238 };
239 };
Claudio Leite8c0ff7a2014-10-31 23:13:30 +0100240};
241
242&mdio {
243 status = "okay";
244};
245
246/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
247 * fixed speed and duplex. */
248&eth0 {
249 status = "okay";
250
251 ethernet0-port@0 {
252 speed = <1000>;
253 duplex = <1>;
254 };
255};
256
257/* eth1 is connected to the switch as well. However DSA only supports a
258 * single CPU port. So leave this port disabled to avoid confusion. */
259
260&eth1 {
261 status = "disabled";
262};
263
264/* There is no battery on the boards, so the RTC does not keep time
265 * when there is no power, making it useless. */
266&rtc {
267 status = "disabled";
268};
Andrew Lunneb13cf82016-04-03 04:03:47 +0200269
270&pciec {
271 status = "okay";
272};
273
274&pcie0 {
275 status = "okay";
276};