blob: 315ea99164566b01458c4a1d676b7b1aa37fdb83 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Serial device configuration
3#
4# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
5#
6
7menu "Serial drivers"
Martin Schwidefskye25df122007-05-10 15:45:57 +02008 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07009
10#
11# The new 8250/16550 serial drivers
12config SERIAL_8250
13 tristate "8250/16550 and compatible serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -080014 depends on (BROKEN || !SPARC)
Linus Torvalds1da177e2005-04-16 15:20:36 -070015 select SERIAL_CORE
16 ---help---
17 This selects whether you want to include the driver for the standard
18 serial ports. The standard answer is Y. People who might say N
19 here are those that are setting up dedicated Ethernet WWW/FTP
20 servers, or users that have one of the various bus mice instead of a
21 serial mouse and don't intend to use their machine's standard serial
22 port for anything. (Note that the Cyclades and Stallion multi
23 serial port drivers do not need this driver built in for them to
24 work.)
25
26 To compile this driver as a module, choose M here: the
Timothy Charles McGrathdf7559d2006-01-23 09:50:09 +000027 module will be called 8250.
Linus Torvalds1da177e2005-04-16 15:20:36 -070028 [WARNING: Do not compile this driver as a module if you are using
29 non-standard serial ports, since the configuration information will
30 be lost when the driver is unloaded. This limitation may be lifted
31 in the future.]
32
33 BTW1: If you have a mouseman serial mouse which is not recognized by
34 the X window system, try running gpm first.
35
36 BTW2: If you intend to use a software modem (also called Winmodem)
37 under Linux, forget it. These modems are crippled and require
38 proprietary drivers which are only available under Windows.
39
40 Most people will say Y or M here, so that they can use serial mice,
41 modems and similar devices connecting to the standard serial ports.
42
43config SERIAL_8250_CONSOLE
44 bool "Console on 8250/16550 and compatible serial port"
45 depends on SERIAL_8250=y
46 select SERIAL_CORE_CONSOLE
47 ---help---
48 If you say Y here, it will be possible to use a serial port as the
49 system console (the system console is the device which receives all
50 kernel messages and warnings and which allows logins in single user
51 mode). This could be useful if some terminal or printer is connected
52 to that serial port.
53
54 Even if you say Y here, the currently visible virtual console
55 (/dev/tty0) will still be used as the system console by default, but
56 you can alter that using a kernel command line option such as
57 "console=ttyS1". (Try "man bootparam" or see the documentation of
58 your boot loader (grub or lilo or loadlin) about how to pass options
59 to the kernel at boot time.)
60
61 If you don't have a VGA card installed and you say Y here, the
62 kernel will automatically use the first serial line, /dev/ttyS0, as
63 system console.
64
65 If unsure, say N.
66
Russell King0cff2602006-03-29 22:03:38 +010067config SERIAL_8250_GSC
68 tristate
69 depends on SERIAL_8250 && GSC
70 default SERIAL_8250
71
72config SERIAL_8250_PCI
73 tristate "8250/16550 PCI device support" if EMBEDDED
74 depends on SERIAL_8250 && PCI
75 default SERIAL_8250
76 help
Bjorn Helgaas7e92b4fc2007-05-08 00:36:07 -070077 Say Y here if you have PCI serial ports.
78
79 To compile this driver as a module, choose M here: the module
80 will be called 8250_pci.
Russell King0cff2602006-03-29 22:03:38 +010081
82config SERIAL_8250_PNP
83 tristate "8250/16550 PNP device support" if EMBEDDED
84 depends on SERIAL_8250 && PNP
85 default SERIAL_8250
86 help
Bjorn Helgaas7e92b4fc2007-05-08 00:36:07 -070087 Say Y here if you have serial ports described by PNPBIOS or ACPI.
88 These are typically ports built into the system board.
89
90 To compile this driver as a module, choose M here: the module
91 will be called 8250_pnp.
Russell King0cff2602006-03-29 22:03:38 +010092
93config SERIAL_8250_HP300
94 tristate
95 depends on SERIAL_8250 && HP300
96 default SERIAL_8250
97
Linus Torvalds1da177e2005-04-16 15:20:36 -070098config SERIAL_8250_CS
99 tristate "8250/16550 PCMCIA device support"
100 depends on PCMCIA && SERIAL_8250
101 ---help---
102 Say Y here to enable support for 16-bit PCMCIA serial devices,
103 including serial port cards, modems, and the modem functions of
104 multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
105 credit-card size devices often used with laptops.)
106
107 To compile this driver as a module, choose M here: the
108 module will be called serial_cs.
109
110 If unsure, say N.
111
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112config SERIAL_8250_NR_UARTS
Russell King026d02a2005-06-29 18:45:19 +0100113 int "Maximum number of 8250/16550 serial ports"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114 depends on SERIAL_8250
115 default "4"
Russell Kingec9f47c2005-06-27 11:12:54 +0100116 help
117 Set this to the number of serial ports you want the driver
118 to support. This includes any ports discovered via ACPI or
119 PCI enumeration and any ports that may be added at run-time
120 via hot-plug, or any ISA multi-port serial cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121
Dave Jonesa61c2d72006-01-07 23:18:19 +0000122config SERIAL_8250_RUNTIME_UARTS
123 int "Number of 8250/16550 serial ports to register at runtime"
124 depends on SERIAL_8250
Russell King9a8ffcc2006-02-03 22:05:42 +0000125 range 0 SERIAL_8250_NR_UARTS
Dave Jonesa61c2d72006-01-07 23:18:19 +0000126 default "4"
127 help
128 Set this to the maximum number of serial ports you want
Matt LaPlante09509602006-10-03 22:31:37 +0200129 the kernel to register at boot time. This can be overridden
Dave Jonesa61c2d72006-01-07 23:18:19 +0000130 with the module parameter "nr_uarts", or boot-time parameter
131 8250.nr_uarts
132
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133config SERIAL_8250_EXTENDED
134 bool "Extended 8250/16550 serial driver options"
135 depends on SERIAL_8250
136 help
137 If you wish to use any non-standard features of the standard "dumb"
138 driver, say Y here. This includes HUB6 support, shared serial
139 interrupts, special multiport support, support for more than the
140 four COM 1/2/3/4 boards, etc.
141
142 Note that the answer to this question won't directly affect the
143 kernel: saying N will just cause the configurator to skip all
144 the questions about serial driver options. If unsure, say N.
145
146config SERIAL_8250_MANY_PORTS
147 bool "Support more than 4 legacy serial ports"
148 depends on SERIAL_8250_EXTENDED && !IA64
149 help
150 Say Y here if you have dumb serial boards other than the four
151 standard COM 1/2/3/4 ports. This may happen if you have an AST
152 FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
153 from <http://www.tldp.org/docs.html#howto>), or other custom
154 serial port hardware which acts similar to standard serial port
155 hardware. If you only use the standard COM 1/2/3/4 ports, you can
156 say N here to save some memory. You can also say Y if you have an
157 "intelligent" multiport card such as Cyclades, Digiboards, etc.
158
Russell Kingec9f47c2005-06-27 11:12:54 +0100159#
160# Multi-port serial cards
161#
162
163config SERIAL_8250_FOURPORT
164 tristate "Support Fourport cards"
165 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
166 help
167 Say Y here if you have an AST FourPort serial board.
168
169 To compile this driver as a module, choose M here: the module
170 will be called 8250_fourport.
171
172config SERIAL_8250_ACCENT
173 tristate "Support Accent cards"
174 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
175 help
176 Say Y here if you have an Accent Async serial board.
177
178 To compile this driver as a module, choose M here: the module
179 will be called 8250_accent.
180
Russell Kingec9f47c2005-06-27 11:12:54 +0100181config SERIAL_8250_BOCA
182 tristate "Support Boca cards"
183 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
184 help
185 Say Y here if you have a Boca serial board. Please read the Boca
Matt LaPlante09509602006-10-03 22:31:37 +0200186 mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
Russell Kingec9f47c2005-06-27 11:12:54 +0100187
188 To compile this driver as a module, choose M here: the module
189 will be called 8250_boca.
190
Paul B Schroedere0980da2006-12-06 20:37:03 -0800191config SERIAL_8250_EXAR_ST16C554
192 tristate "Support Exar ST16C554/554D Quad UART"
193 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
194 help
195 The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
196 tinkering with your Envoy TU301, or have a machine with this UART,
197 say Y here.
198
199 To compile this driver as a module, choose M here: the module
200 will be called 8250_exar_st16c554.
201
Russell Kingec9f47c2005-06-27 11:12:54 +0100202config SERIAL_8250_HUB6
203 tristate "Support Hub6 cards"
204 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
205 help
206 Say Y here if you have a HUB6 serial board.
207
208 To compile this driver as a module, choose M here: the module
209 will be called 8250_hub6.
210
Don Mullisbf4735a2006-12-10 02:18:37 -0800211config SERIAL_8250_SHARE_IRQ
212 bool "Support for sharing serial interrupts"
213 depends on SERIAL_8250_EXTENDED
214 help
215 Some serial boards have hardware support which allows multiple dumb
216 serial ports on the same board to share a single IRQ. To enable
217 support for this in the serial driver, say Y here.
218
219config SERIAL_8250_DETECT_IRQ
220 bool "Autodetect IRQ on standard ports (unsafe)"
221 depends on SERIAL_8250_EXTENDED
222 help
223 Say Y here if you want the kernel to try to guess which IRQ
224 to use for your serial port.
225
226 This is considered unsafe; it is far better to configure the IRQ in
227 a boot script using the setserial command.
228
229 If unsure, say N.
230
231config SERIAL_8250_RSA
232 bool "Support RSA serial ports"
233 depends on SERIAL_8250_EXTENDED
234 help
235 ::: To be written :::
236
Russell Kingec9f47c2005-06-27 11:12:54 +0100237config SERIAL_8250_MCA
238 tristate "Support 8250-type ports on MCA buses"
239 depends on SERIAL_8250 != n && MCA
240 help
241 Say Y here if you have a MCA serial ports.
242
243 To compile this driver as a module, choose M here: the module
244 will be called 8250_mca.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245
246config SERIAL_8250_ACORN
247 tristate "Acorn expansion card serial port support"
Russell Kingec9f47c2005-06-27 11:12:54 +0100248 depends on ARCH_ACORN && SERIAL_8250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700249 help
250 If you have an Atomwide Serial card or Serial Port card for an Acorn
251 system, say Y to this option. The driver can handle 1, 2, or 3 port
252 cards. If unsure, say N.
253
Pantelis Antoniou21c614a2005-11-06 09:07:03 +0000254config SERIAL_8250_AU1X00
255 bool "AU1X00 serial port support"
256 depends on SERIAL_8250 != n && SOC_AU1X00
257 help
258 If you have an Au1x00 board and want to use the serial port, say Y
259 to this option. The driver can handle 1 or 2 serial ports.
260 If unsure, say N.
261
Thomas Koellerbd71c182007-05-06 14:48:47 -0700262config SERIAL_8250_RM9K
263 bool "Support for MIPS RM9xxx integrated serial port"
264 depends on SERIAL_8250 != n && SERIAL_RM9000
265 select SERIAL_8250_SHARE_IRQ
266 help
267 Selecting this option will add support for the integrated serial
268 port hardware found on MIPS RM9122 and similar processors.
269 If unsure, say N.
270
Russell Kingec9f47c2005-06-27 11:12:54 +0100271comment "Non-8250 serial port support"
272
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273config SERIAL_AMBA_PL010
274 tristate "ARM AMBA PL010 serial port support"
Al Viro84b6a232005-08-23 22:46:16 +0100275 depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276 select SERIAL_CORE
277 help
278 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
Lennert Buytenhek00584712007-02-05 16:10:22 -0800279 an Integrator/AP or Integrator/PP2 platform, or if you have a
280 Cirrus Logic EP93xx CPU, say Y or M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281
282 If unsure, say N.
283
284config SERIAL_AMBA_PL010_CONSOLE
285 bool "Support for console on AMBA serial port"
286 depends on SERIAL_AMBA_PL010=y
287 select SERIAL_CORE_CONSOLE
288 ---help---
289 Say Y here if you wish to use an AMBA PrimeCell UART as the system
290 console (the system console is the device which receives all kernel
291 messages and warnings and which allows logins in single user mode).
292
293 Even if you say Y here, the currently visible framebuffer console
294 (/dev/tty0) will still be used as the system console by default, but
295 you can alter that using a kernel command line option such as
296 "console=ttyAM0". (Try "man bootparam" or see the documentation of
297 your boot loader (lilo or loadlin) about how to pass options to the
298 kernel at boot time.)
299
300config SERIAL_AMBA_PL011
301 tristate "ARM AMBA PL011 serial port support"
302 depends on ARM_AMBA
303 select SERIAL_CORE
304 help
305 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
306 an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
307 here.
308
309 If unsure, say N.
310
311config SERIAL_AMBA_PL011_CONSOLE
312 bool "Support for console on AMBA serial port"
313 depends on SERIAL_AMBA_PL011=y
314 select SERIAL_CORE_CONSOLE
315 ---help---
316 Say Y here if you wish to use an AMBA PrimeCell UART as the system
317 console (the system console is the device which receives all kernel
318 messages and warnings and which allows logins in single user mode).
319
320 Even if you say Y here, the currently visible framebuffer console
321 (/dev/tty0) will still be used as the system console by default, but
322 you can alter that using a kernel command line option such as
Peter Korsgaardb22b4cd2006-09-29 02:00:23 -0700323 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
Linus Torvalds1da177e2005-04-16 15:20:36 -0700324 your boot loader (lilo or loadlin) about how to pass options to the
325 kernel at boot time.)
326
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200327config SERIAL_ATMEL
328 bool "AT91 / AT32 on-chip serial port support"
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200329 depends on (ARM && ARCH_AT91) || AVR32
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000330 select SERIAL_CORE
331 help
Andrew Victorafefc412006-06-19 19:53:19 +0100332 This enables the driver for the on-chip UARTs of the Atmel
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200333 AT91 and AT32 processors.
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000334
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200335config SERIAL_ATMEL_CONSOLE
336 bool "Support for console on AT91 / AT32 serial port"
337 depends on SERIAL_ATMEL=y
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000338 select SERIAL_CORE_CONSOLE
339 help
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200340 Say Y here if you wish to use an on-chip UART on a Atmel
341 AT91 or AT32 processor as the system console (the system
342 console is the device which receives all kernel messages and
343 warnings and which allows logins in single user mode).
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000344
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200345config SERIAL_ATMEL_TTYAT
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200346 bool "Install as device ttyATn instead of ttySn"
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +0200347 depends on SERIAL_ATMEL=y
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000348 help
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200349 Say Y here if you wish to have the internal AT91 / AT32 UARTs
350 appear as /dev/ttyATn (major 204, minor starting at 154)
351 instead of the normal /dev/ttySn (major 4, minor starting at
352 64). This is necessary if you also want other UARTs, such as
353 external 8250/16C550 compatible UARTs.
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000354 The ttySn nodes are legally reserved for the 8250 serial driver
355 but are often misused by other serial drivers.
356
357 To use this, you should create suitable ttyATn device nodes in
358 /dev/, and pass "console=ttyATn" to the kernel.
359
360 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
361
Andrew Victor2c7ee6a2007-05-11 21:37:25 +0100362config SERIAL_KS8695
363 bool "Micrel KS8695 (Centaur) serial port support"
364 depends on ARCH_KS8695
365 select SERIAL_CORE
366 help
367 This selects the Micrel Centaur KS8695 UART. Say Y here.
368
369config SERIAL_KS8695_CONSOLE
370 bool "Support for console on KS8695 (Centaur) serial port"
371 depends on SERIAL_KS8695=y
372 select SERIAL_CORE_CONSOLE
373 help
374 Say Y here if you wish to use a KS8695 (Centaur) UART as the
375 system console (the system console is the device which
376 receives all kernel messages and warnings and which allows
377 logins in single user mode).
378
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379config SERIAL_CLPS711X
380 tristate "CLPS711X serial port support"
381 depends on ARM && ARCH_CLPS711X
382 select SERIAL_CORE
383 help
384 ::: To be written :::
385
386config SERIAL_CLPS711X_CONSOLE
387 bool "Support for console on CLPS711X serial port"
388 depends on SERIAL_CLPS711X=y
389 select SERIAL_CORE_CONSOLE
390 help
391 Even if you say Y here, the currently visible virtual console
392 (/dev/tty0) will still be used as the system console by default, but
393 you can alter that using a kernel command line option such as
394 "console=ttyCL1". (Try "man bootparam" or see the documentation of
395 your boot loader (lilo or loadlin) about how to pass options to the
396 kernel at boot time.)
397
398config SERIAL_S3C2410
Ben Dooks73e55cb2006-06-24 21:21:32 +0100399 tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400 depends on ARM && ARCH_S3C2410
401 select SERIAL_CORE
402 help
Ben Dooks73e55cb2006-06-24 21:21:32 +0100403 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404 providing /dev/ttySAC0, 1 and 2 (note, some machines may not
405 provide all of these ports, depending on how the serial port
406 pins are configured.
407
Ben Dooks73e55cb2006-06-24 21:21:32 +0100408 Currently this driver supports the UARTS on the S3C2410, S3C2440,
409 S3C2442, S3C2412 and S3C2413 CPUs.
410
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411config SERIAL_S3C2410_CONSOLE
412 bool "Support for console on S3C2410 serial port"
413 depends on SERIAL_S3C2410=y
414 select SERIAL_CORE_CONSOLE
415 help
Ben Dooks73e55cb2006-06-24 21:21:32 +0100416 Allow selection of the S3C24XX on-board serial ports for use as
Linus Torvalds1da177e2005-04-16 15:20:36 -0700417 an virtual console.
418
419 Even if you say Y here, the currently visible virtual console
420 (/dev/tty0) will still be used as the system console by default, but
421 you can alter that using a kernel command line option such as
422 "console=ttySACx". (Try "man bootparam" or see the documentation of
423 your boot loader about how to pass options to the kernel at
424 boot time.)
425
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426config SERIAL_DZ
427 bool "DECstation DZ serial driver"
Ralf Baechle875d43e2005-09-03 15:56:16 -0700428 depends on MACH_DECSTATION && 32BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 select SERIAL_CORE
430 help
431 DZ11-family serial controllers for VAXstations, including the
432 DC7085, M7814, and M7819.
433
434config SERIAL_DZ_CONSOLE
435 bool "Support console on DECstation DZ serial driver"
436 depends on SERIAL_DZ=y
437 select SERIAL_CORE_CONSOLE
438 help
439 If you say Y here, it will be possible to use a serial port as the
440 system console (the system console is the device which receives all
441 kernel messages and warnings and which allows logins in single user
442 mode). Note that the firmware uses ttyS0 as the serial console on
443 the Maxine and ttyS2 on the others.
444
445 If unsure, say Y.
446
447config SERIAL_21285
448 tristate "DC21285 serial port support"
449 depends on ARM && FOOTBRIDGE
450 select SERIAL_CORE
451 help
452 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
453 PCI bridge you can enable its onboard serial port by enabling this
454 option.
455
456config SERIAL_21285_CONSOLE
457 bool "Console on DC21285 serial port"
458 depends on SERIAL_21285=y
459 select SERIAL_CORE_CONSOLE
460 help
461 If you have enabled the serial port on the 21285 footbridge you can
462 make it the console by answering Y to this option.
463
464 Even if you say Y here, the currently visible virtual console
465 (/dev/tty0) will still be used as the system console by default, but
466 you can alter that using a kernel command line option such as
467 "console=ttyFB". (Try "man bootparam" or see the documentation of
468 your boot loader (lilo or loadlin) about how to pass options to the
469 kernel at boot time.)
470
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471config SERIAL_MPSC
472 bool "Marvell MPSC serial port support"
473 depends on PPC32 && MV64X60
474 select SERIAL_CORE
475 help
476 Say Y here if you want to use the Marvell MPSC serial controller.
477
478config SERIAL_MPSC_CONSOLE
479 bool "Support for console on Marvell MPSC serial port"
480 depends on SERIAL_MPSC
481 select SERIAL_CORE_CONSOLE
482 help
483 Say Y here if you want to support a serial console on a Marvell MPSC.
484
485config SERIAL_PXA
486 bool "PXA serial port support"
487 depends on ARM && ARCH_PXA
488 select SERIAL_CORE
489 help
490 If you have a machine based on an Intel XScale PXA2xx CPU you
491 can enable its onboard serial ports by enabling this option.
492
493config SERIAL_PXA_CONSOLE
494 bool "Console on PXA serial port"
495 depends on SERIAL_PXA
496 select SERIAL_CORE_CONSOLE
497 help
498 If you have enabled the serial port on the Intel XScale PXA
499 CPU you can make it the console by answering Y to this option.
500
501 Even if you say Y here, the currently visible virtual console
502 (/dev/tty0) will still be used as the system console by default, but
503 you can alter that using a kernel command line option such as
504 "console=ttySA0". (Try "man bootparam" or see the documentation of
505 your boot loader (lilo or loadlin) about how to pass options to the
506 kernel at boot time.)
507
508config SERIAL_SA1100
509 bool "SA1100 serial port support"
510 depends on ARM && ARCH_SA1100
511 select SERIAL_CORE
512 help
513 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
514 can enable its onboard serial port by enabling this option.
515 Please read <file:Documentation/arm/SA1100/serial_UART> for further
516 info.
517
518config SERIAL_SA1100_CONSOLE
519 bool "Console on SA1100 serial port"
520 depends on SERIAL_SA1100
521 select SERIAL_CORE_CONSOLE
522 help
523 If you have enabled the serial port on the SA1100/SA1110 StrongARM
524 CPU you can make it the console by answering Y to this option.
525
526 Even if you say Y here, the currently visible virtual console
527 (/dev/tty0) will still be used as the system console by default, but
528 you can alter that using a kernel command line option such as
529 "console=ttySA0". (Try "man bootparam" or see the documentation of
530 your boot loader (lilo or loadlin) about how to pass options to the
531 kernel at boot time.)
532
Bryan Wu194de562007-05-06 14:50:30 -0700533config SERIAL_BFIN
534 tristate "Blackfin serial port support"
535 depends on BFIN
536 select SERIAL_CORE
537 select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
538 help
539 Add support for the built-in UARTs on the Blackfin.
540
541 To compile this driver as a module, choose M here: the
542 module will be called bfin_5xx.
543
544config SERIAL_BFIN_CONSOLE
545 bool "Console on Blackfin serial port"
546 depends on SERIAL_BFIN
547 select SERIAL_CORE_CONSOLE
548
549choice
550 prompt "UART Mode"
551 depends on SERIAL_BFIN
552 default SERIAL_BFIN_DMA
553 help
554 This driver supports the built-in serial ports of the Blackfin family
555 of CPUs
556
557config SERIAL_BFIN_DMA
558 bool "DMA mode"
559 depends on DMA_UNCACHED_1M
560 help
561 This driver works under DMA mode. If this option is selected, the
562 blackfin simple dma driver is also enabled.
563
564config SERIAL_BFIN_PIO
565 bool "PIO mode"
566 help
567 This driver works under PIO mode.
568
569endchoice
570
571config SERIAL_BFIN_UART0
572 bool "Enable UART0"
573 depends on SERIAL_BFIN
574 help
575 Enable UART0
576
577config BFIN_UART0_CTSRTS
578 bool "Enable UART0 hardware flow control"
579 depends on SERIAL_BFIN_UART0
580 help
581 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
582 signal.
583
584config UART0_CTS_PIN
585 int "UART0 CTS pin"
586 depends on BFIN_UART0_CTSRTS
587 default 23
588 help
589 The default pin is GPIO_GP7.
590 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
591
592config UART0_RTS_PIN
593 int "UART0 RTS pin"
594 depends on BFIN_UART0_CTSRTS
595 default 22
596 help
597 The default pin is GPIO_GP6.
598 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
599
600config SERIAL_BFIN_UART1
601 bool "Enable UART1"
602 depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
603 help
604 Enable UART1
605
606config BFIN_UART1_CTSRTS
607 bool "Enable UART1 hardware flow control"
608 depends on SERIAL_BFIN_UART1
609 help
610 Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
611 signal.
612
613config UART1_CTS_PIN
614 int "UART1 CTS pin"
615 depends on BFIN_UART1_CTSRTS
616 default -1
617 help
618 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
619
620config UART1_RTS_PIN
621 int "UART1 RTS pin"
622 depends on BFIN_UART1_CTSRTS
623 default -1
624 help
625 Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
626
Linus Torvalds1da177e2005-04-16 15:20:36 -0700627config SERIAL_IMX
628 bool "IMX serial port support"
629 depends on ARM && ARCH_IMX
630 select SERIAL_CORE
631 help
632 If you have a machine based on a Motorola IMX CPU you
633 can enable its onboard serial port by enabling this option.
634
635config SERIAL_IMX_CONSOLE
636 bool "Console on IMX serial port"
637 depends on SERIAL_IMX
638 select SERIAL_CORE_CONSOLE
639 help
640 If you have enabled the serial port on the Motorola IMX
641 CPU you can make it the console by answering Y to this option.
642
643 Even if you say Y here, the currently visible virtual console
644 (/dev/tty0) will still be used as the system console by default, but
645 you can alter that using a kernel command line option such as
646 "console=ttySA0". (Try "man bootparam" or see the documentation of
647 your boot loader (lilo or loadlin) about how to pass options to the
648 kernel at boot time.)
649
Peter Korsgaard238b8722006-12-06 20:35:17 -0800650config SERIAL_UARTLITE
651 tristate "Xilinx uartlite serial port support"
652 depends on PPC32
653 select SERIAL_CORE
654 help
655 Say Y here if you want to use the Xilinx uartlite serial controller.
656
657 To compile this driver as a module, choose M here: the
658 module will be called uartlite.ko.
659
660config SERIAL_UARTLITE_CONSOLE
661 bool "Support for console on Xilinx uartlite serial port"
662 depends on SERIAL_UARTLITE=y
663 select SERIAL_CORE_CONSOLE
664 help
665 Say Y here if you wish to use a Xilinx uartlite as the system
666 console (the system console is the device which receives all kernel
667 messages and warnings and which allows logins in single user mode).
668
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669config SERIAL_SUNCORE
670 bool
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800671 depends on SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700672 select SERIAL_CORE
673 select SERIAL_CORE_CONSOLE
674 default y
675
676config SERIAL_SUNZILOG
677 tristate "Sun Zilog8530 serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800678 depends on SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700679 help
680 This driver supports the Zilog8530 serial ports found on many Sparc
681 systems. Say Y or M if you want to be able to these serial ports.
682
683config SERIAL_SUNZILOG_CONSOLE
684 bool "Console on Sun Zilog8530 serial port"
685 depends on SERIAL_SUNZILOG=y
686 help
687 If you would like to be able to use the Zilog8530 serial port
688 on your Sparc system as the console, you can do so by answering
689 Y to this option.
690
691config SERIAL_SUNSU
692 tristate "Sun SU serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800693 depends on SPARC && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694 help
695 This driver supports the 8250 serial ports that run the keyboard and
696 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
697 to these serial ports.
698
699config SERIAL_SUNSU_CONSOLE
700 bool "Console on Sun SU serial port"
701 depends on SERIAL_SUNSU=y
702 help
703 If you would like to be able to use the SU serial port
704 on your Sparc system as the console, you can do so by answering
705 Y to this option.
706
707config SERIAL_MUX
708 tristate "Serial MUX support"
Matthew Wilcox305f5162005-11-18 16:17:50 -0500709 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 select SERIAL_CORE
711 default y
712 ---help---
713 Saying Y here will enable the hardware MUX serial driver for
Carlos O'Donelle45da352006-09-16 14:35:51 -0400714 the Nova, K class systems and D class with a 'remote control card'.
715 The hardware MUX is not 8250/16550 compatible therefore the
716 /dev/ttyB0 device is shared between the Serial MUX and the PDC
717 software console. The following steps need to be completed to use
718 the Serial MUX:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719
720 1. create the device entry (mknod /dev/ttyB0 c 11 0)
721 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
722 3. Add device ttyB0 to /etc/securetty (if you want to log on as
723 root on this console.)
724 4. Change the kernel command console parameter to: console=ttyB0
725
726config SERIAL_MUX_CONSOLE
727 bool "Support for console on serial MUX"
728 depends on SERIAL_MUX
729 select SERIAL_CORE_CONSOLE
730 default y
731
732config PDC_CONSOLE
733 bool "PDC software console support"
734 depends on PARISC && !SERIAL_MUX && VT
735 default n
736 help
737 Saying Y here will enable the software based PDC console to be
738 used as the system console. This is useful for machines in
739 which the hardware based console has not been written yet. The
740 following steps must be competed to use the PDC console:
741
742 1. create the device entry (mknod /dev/ttyB0 c 11 0)
743 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
744 3. Add device ttyB0 to /etc/securetty (if you want to log on as
745 root on this console.)
746 4. Change the kernel command console parameter to: console=ttyB0
747
748config SERIAL_SUNSAB
749 tristate "Sun Siemens SAB82532 serial support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800750 depends on SPARC && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751 help
752 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
753 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
754 serial ports.
755
756config SERIAL_SUNSAB_CONSOLE
757 bool "Console on Sun Siemens SAB82532 serial port"
758 depends on SERIAL_SUNSAB=y
759 help
760 If you would like to be able to use the SAB82532 serial port
761 on your Sparc system as the console, you can do so by answering
762 Y to this option.
763
David S. Miller02fd4732006-02-11 02:25:21 -0800764config SERIAL_SUNHV
765 bool "Sun4v Hypervisor Console support"
766 depends on SPARC64
767 help
768 This driver supports the console device found on SUN4V Sparc
769 systems. Say Y if you want to be able to use this device.
770
Linus Torvalds1da177e2005-04-16 15:20:36 -0700771config SERIAL_IP22_ZILOG
772 tristate "IP22 Zilog8530 serial support"
773 depends on SGI_IP22
774 select SERIAL_CORE
775 help
776 This driver supports the Zilog8530 serial ports found on SGI IP22
777 systems. Say Y or M if you want to be able to these serial ports.
778
779config SERIAL_IP22_ZILOG_CONSOLE
780 bool "Console on IP22 Zilog8530 serial port"
781 depends on SERIAL_IP22_ZILOG=y
782 select SERIAL_CORE_CONSOLE
783
784config V850E_UART
785 bool "NEC V850E on-chip UART support"
786 depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
787 select SERIAL_CORE
788 default y
789
790config V850E_UARTB
791 bool
Robert P. J. Daybef1f402006-12-12 20:04:19 +0100792 depends on V850E_UART && V850E_ME2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700793 default y
794
795config V850E_UART_CONSOLE
796 bool "Use NEC V850E on-chip UART for console"
797 depends on V850E_UART
798 select SERIAL_CORE_CONSOLE
799
800config SERIAL_SH_SCI
Paul Mundtecd95612006-09-27 17:32:30 +0900801 tristate "SuperH SCI(F) serial port support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802 depends on SUPERH || H8300
803 select SERIAL_CORE
804
Paul Mundtecd95612006-09-27 17:32:30 +0900805config SERIAL_SH_SCI_NR_UARTS
806 int "Maximum number of SCI(F) serial ports"
807 depends on SERIAL_SH_SCI
808 default "2"
809
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810config SERIAL_SH_SCI_CONSOLE
Paul Mundtecd95612006-09-27 17:32:30 +0900811 bool "Support for console on SuperH SCI(F)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700812 depends on SERIAL_SH_SCI=y
813 select SERIAL_CORE_CONSOLE
814
Vitaly Woolde8211b2007-02-14 00:33:09 -0800815config SERIAL_PNX8XXX
816 bool "Enable PNX8XXX SoCs' UART Support"
817 depends on MIPS && SOC_PNX8550
818 select SERIAL_CORE
819 help
820 If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
821 and you want to use serial ports, say Y. Otherwise, say N.
822
823config SERIAL_PNX8XXX_CONSOLE
824 bool "Enable PNX8XX0 serial console"
825 depends on SERIAL_PNX8XXX
826 select SERIAL_CORE_CONSOLE
827 help
828 If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
829 and you want to use serial console, say Y. Otherwise, say N.
830
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831config SERIAL_CORE
832 tristate
833
834config SERIAL_CORE_CONSOLE
835 bool
836
837config SERIAL_68328
838 bool "68328 serial support"
839 depends on M68328 || M68EZ328 || M68VZ328
840 help
841 This driver supports the built-in serial port of the Motorola 68328
Matt LaPlante09509602006-10-03 22:31:37 +0200842 (standard, EZ and VZ varieties).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700843
844config SERIAL_68328_RTS_CTS
845 bool "Support RTS/CTS on 68328 serial port"
846 depends on SERIAL_68328
847
848config SERIAL_COLDFIRE
849 bool "ColdFire serial support"
850 depends on COLDFIRE
851 help
852 This driver supports the built-in serial ports of the Motorola ColdFire
853 family of CPUs.
854
855config SERIAL_68360_SMC
856 bool "68360 SMC uart support"
857 depends on M68360
858 help
859 This driver supports the SMC serial ports of the Motorola 68360 CPU.
860
861config SERIAL_68360_SCC
862 bool "68360 SCC uart support"
863 depends on M68360
864 help
865 This driver supports the SCC serial ports of the Motorola 68360 CPU.
866
867config SERIAL_68360
868 bool
869 depends on SERIAL_68360_SMC || SERIAL_68360_SCC
870 default y
871
872config SERIAL_PMACZILOG
873 tristate "PowerMac z85c30 ESCC support"
874 depends on PPC_OF && PPC_PMAC
875 select SERIAL_CORE
876 help
877 This driver supports the Zilog z85C30 serial ports found on
878 PowerMac machines.
879 Say Y or M if you want to be able to these serial ports.
880
881config SERIAL_PMACZILOG_CONSOLE
882 bool "Console on PowerMac z85c30 serial port"
883 depends on SERIAL_PMACZILOG=y
884 select SERIAL_CORE_CONSOLE
885 help
886 If you would like to be able to use the z85c30 serial port
887 on your PowerMac as the console, you can do so by answering
888 Y to this option.
889
890config SERIAL_LH7A40X
891 tristate "Sharp LH7A40X embedded UART support"
892 depends on ARM && ARCH_LH7A40X
893 select SERIAL_CORE
894 help
895 This enables support for the three on-board UARTs of the
896 Sharp LH7A40X series CPUs. Choose Y or M.
897
898config SERIAL_LH7A40X_CONSOLE
899 bool "Support for console on Sharp LH7A40X serial port"
900 depends on SERIAL_LH7A40X=y
901 select SERIAL_CORE_CONSOLE
902 help
903 Say Y here if you wish to use one of the serial ports as the
904 system console--the system console is the device which
905 receives all kernel messages and warnings and which allows
906 logins in single user mode.
907
908 Even if you say Y here, the currently visible framebuffer console
909 (/dev/tty0) will still be used as the default system console, but
910 you can alter that using a kernel command line, for example
911 "console=ttyAM1".
912
913config SERIAL_CPM
914 tristate "CPM SCC/SMC serial port support"
915 depends on CPM2 || 8xx
916 select SERIAL_CORE
917 help
918 This driver supports the SCC and SMC serial ports on Motorola
919 embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
920
921config SERIAL_CPM_CONSOLE
922 bool "Support for console on CPM SCC/SMC serial port"
923 depends on SERIAL_CPM=y
924 select SERIAL_CORE_CONSOLE
925 help
926 Say Y here if you wish to use a SCC or SMC CPM UART as the system
927 console (the system console is the device which receives all kernel
928 messages and warnings and which allows logins in single user mode).
929
930 Even if you say Y here, the currently visible framebuffer console
931 (/dev/tty0) will still be used as the system console by default, but
932 you can alter that using a kernel command line option such as
933 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
934 your boot loader (lilo or loadlin) about how to pass options to the
935 kernel at boot time.)
936
937config SERIAL_CPM_SCC1
938 bool "Support for SCC1 serial port"
939 depends on SERIAL_CPM=y
940 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700941 Select this option to use SCC1 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942
943config SERIAL_CPM_SCC2
944 bool "Support for SCC2 serial port"
945 depends on SERIAL_CPM=y
946 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700947 Select this option to use SCC2 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700948
949config SERIAL_CPM_SCC3
950 bool "Support for SCC3 serial port"
951 depends on SERIAL_CPM=y
952 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700953 Select this option to use SCC3 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954
955config SERIAL_CPM_SCC4
956 bool "Support for SCC4 serial port"
957 depends on SERIAL_CPM=y
958 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700959 Select this option to use SCC4 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700960
961config SERIAL_CPM_SMC1
962 bool "Support for SMC1 serial port"
963 depends on SERIAL_CPM=y
964 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700965 Select this option to use SMC1 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700966
967config SERIAL_CPM_SMC2
968 bool "Support for SMC2 serial port"
969 depends on SERIAL_CPM=y
970 help
Randy Dunlap74e8b512006-10-19 23:28:26 -0700971 Select this option to use SMC2 as a serial port
Linus Torvalds1da177e2005-04-16 15:20:36 -0700972
973config SERIAL_SGI_L1_CONSOLE
974 bool "SGI Altix L1 serial console support"
975 depends on IA64_GENERIC || IA64_SGI_SN2
976 select SERIAL_CORE
977 select SERIAL_CORE_CONSOLE
978 help
979 If you have an SGI Altix and you would like to use the system
980 controller serial port as your console (you want this!),
981 say Y. Otherwise, say N.
982
983config SERIAL_MPC52xx
984 tristate "Freescale MPC52xx family PSC serial support"
985 depends on PPC_MPC52xx
986 select SERIAL_CORE
987 help
988 This drivers support the MPC52xx PSC serial ports. If you would
989 like to use them, you must answer Y or M to this option. Not that
990 for use as console, it must be included in kernel and not as a
991 module.
992
993config SERIAL_MPC52xx_CONSOLE
994 bool "Console on a Freescale MPC52xx family PSC serial port"
995 depends on SERIAL_MPC52xx=y
996 select SERIAL_CORE_CONSOLE
997 help
998 Select this options if you'd like to use one of the PSC serial port
999 of the Freescale MPC52xx family as a console.
1000
1001config SERIAL_MPC52xx_CONSOLE_BAUD
1002 int "Freescale MPC52xx family PSC serial port baud"
1003 depends on SERIAL_MPC52xx_CONSOLE=y
1004 default "9600"
1005 help
1006 Select the MPC52xx console baud rate.
1007 This value is only used if the bootloader doesn't pass in the
1008 console baudrate
1009
1010config SERIAL_ICOM
1011 tristate "IBM Multiport Serial Adapter"
Stephen Rothwell145d01e2005-06-21 17:15:52 -07001012 depends on PCI && (PPC_ISERIES || PPC_PSERIES)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001013 select SERIAL_CORE
maximilian attemscb2fc532006-03-25 17:44:20 +00001014 select FW_LOADER
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015 help
1016 This driver is for a family of multiport serial adapters
1017 including 2 port RVX, 2 port internal modem, 4 port internal
1018 modem and a split 1 port RVX and 1 port internal modem.
1019
1020 This driver can also be built as a module. If so, the module
1021 will be called icom.
1022
1023config SERIAL_M32R_SIO
1024 bool "M32R SIO I/F"
1025 depends on M32R
1026 default y
1027 select SERIAL_CORE
1028 help
1029 Say Y here if you want to use the M32R serial controller.
1030
1031config SERIAL_M32R_SIO_CONSOLE
1032 bool "use SIO console"
1033 depends on SERIAL_M32R_SIO=y
1034 select SERIAL_CORE_CONSOLE
1035 help
1036 Say Y here if you want to support a serial console.
1037
1038 If you use an M3T-M32700UT or an OPSPUT platform,
1039 please say also y for SERIAL_M32R_PLDSIO.
1040
1041config SERIAL_M32R_PLDSIO
1042 bool "M32R SIO I/F on a PLD"
Adrian Bunkd600b972006-01-13 21:57:22 +00001043 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044 default n
1045 help
1046 Say Y here if you want to use the M32R serial controller
1047 on a PLD (Programmable Logic Device).
1048
1049 If you use an M3T-M32700UT or an OPSPUT platform,
1050 please say Y.
1051
1052config SERIAL_TXX9
1053 bool "TMPTX39XX/49XX SIO support"
Robert P. J. Daybef1f402006-12-12 20:04:19 +01001054 depends on HAS_TXX9_SERIAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055 select SERIAL_CORE
1056 default y
1057
1058config HAS_TXX9_SERIAL
1059 bool
1060
Atsushi Nemoto138c5d22007-02-10 01:45:05 -08001061config SERIAL_TXX9_NR_UARTS
1062 int "Maximum number of TMPTX39XX/49XX SIO ports"
1063 depends on SERIAL_TXX9
1064 default "6"
1065
Linus Torvalds1da177e2005-04-16 15:20:36 -07001066config SERIAL_TXX9_CONSOLE
1067 bool "TMPTX39XX/49XX SIO Console support"
1068 depends on SERIAL_TXX9=y
1069 select SERIAL_CORE_CONSOLE
1070
1071config SERIAL_TXX9_STDSERIAL
1072 bool "TX39XX/49XX SIO act as standard serial"
1073 depends on !SERIAL_8250 && SERIAL_TXX9
1074
1075config SERIAL_VR41XX
1076 tristate "NEC VR4100 series Serial Interface Unit support"
1077 depends on CPU_VR41XX
1078 select SERIAL_CORE
1079 help
1080 If you have a NEC VR4100 series processor and you want to use
1081 Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
1082 (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
1083
1084config SERIAL_VR41XX_CONSOLE
1085 bool "Enable NEC VR4100 series Serial Interface Unit console"
1086 depends on SERIAL_VR41XX
1087 select SERIAL_CORE_CONSOLE
1088 help
1089 If you have a NEC VR4100 series processor and you want to use
1090 a console on a serial port, say Y. Otherwise, say N.
1091
1092config SERIAL_JSM
V. Ananda Krishnan0a577ce2006-02-03 03:04:30 -08001093 tristate "Digi International NEO PCI Support"
1094 depends on PCI
1095 select SERIAL_CORE
1096 help
1097 This is a driver for Digi International's Neo series
1098 of cards which provide multiple serial ports. You would need
1099 something like this to connect more than two modems to your Linux
1100 box, for instance in order to become a dial-in server. This driver
1101 supports PCI boards only.
Arthur Othienoa5f1e4e2006-02-15 09:52:46 +00001102
1103 If you have a card like this, say Y here, otherwise say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001104
V. Ananda Krishnan0a577ce2006-02-03 03:04:30 -08001105 To compile this driver as a module, choose M here: the
1106 module will be called jsm.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107
Brent Casavante5d310b2005-06-21 17:16:01 -07001108config SERIAL_SGI_IOC4
1109 tristate "SGI IOC4 controller serial support"
1110 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1111 select SERIAL_CORE
1112 help
1113 If you have an SGI Altix with an IOC4 based Base IO card
1114 and wish to use the serial ports on this card, say Y.
1115 Otherwise, say N.
1116
Patrick Gefre2d0cfb52006-01-14 13:20:40 -08001117config SERIAL_SGI_IOC3
1118 tristate "SGI Altix IOC3 serial support"
1119 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1120 select SERIAL_CORE
1121 help
1122 If you have an SGI Altix with an IOC3 serial card,
1123 say Y or M. Otherwise, say N.
1124
Sascha Hauerf8441e12006-06-19 13:29:07 +01001125config SERIAL_NETX
1126 bool "NetX serial port support"
1127 depends on ARM && ARCH_NETX
1128 select SERIAL_CORE
1129 help
1130 If you have a machine based on a Hilscher NetX SoC you
1131 can enable its onboard serial port by enabling this option.
1132
1133 To compile this driver as a module, choose M here: the
1134 module will be called netx-serial.
1135
1136config SERIAL_NETX_CONSOLE
1137 bool "Console on NetX serial port"
1138 depends on SERIAL_NETX
1139 select SERIAL_CORE_CONSOLE
1140 help
1141 If you have enabled the serial port on the Motorola IMX
1142 CPU you can make it the console by answering Y to this option.
1143
Arnd Bergmann8d38a5b2007-02-13 21:35:38 +01001144config SERIAL_OF_PLATFORM
1145 tristate "Serial port on Open Firmware platform bus"
1146 depends on PPC_OF
1147 depends on SERIAL_8250
1148 help
1149 If you have a PowerPC based system that has serial ports
1150 on a platform specific bus, you should enable this option.
1151 Currently, only 8250 compatible ports are supported, but
1152 others can easily be added.
1153
Linus Torvalds1da177e2005-04-16 15:20:36 -07001154endmenu