blob: 9447a57ee8a9fbf212d8ab6b242cb5cf26a3542a [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
23
24#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
25 SUPPORTED_10baseT_Full | \
26 SUPPORTED_100baseT_Half | \
27 SUPPORTED_100baseT_Full | \
28 SUPPORTED_Autoneg | \
29 SUPPORTED_TP | \
30 SUPPORTED_MII)
31
32#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
33 SUPPORTED_1000baseT_Half | \
34 SUPPORTED_1000baseT_Full)
35
36/* Set phydev->irq to PHY_POLL if interrupts are not supported,
37 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
38 * the attached driver handles the interrupt
39 */
40#define PHY_POLL -1
41#define PHY_IGNORE_INTERRUPT -2
42
43#define PHY_HAS_INTERRUPT 0x00000001
44#define PHY_HAS_MAGICANEG 0x00000002
45
46#define MII_BUS_MAX 4
47
48
49#define PHY_INIT_TIMEOUT 100000
50#define PHY_STATE_TIME 1
51#define PHY_FORCE_TIMEOUT 10
52#define PHY_AN_TIMEOUT 10
53
54#define PHY_MAX_ADDR 32
55
Kumar Galaa4d00f12006-01-11 11:27:33 -080056/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
57#define PHY_ID_FMT "%x:%02x"
58
Andy Fleming00db8182005-07-30 19:31:23 -040059/* The Bus class for PHYs. Devices which provide access to
60 * PHYs should register using this structure */
61struct mii_bus {
62 const char *name;
63 int id;
64 void *priv;
65 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
66 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
67 int (*reset)(struct mii_bus *bus);
68
69 /* A lock to ensure that only one thing can read/write
70 * the MDIO bus at a time */
71 spinlock_t mdio_lock;
72
73 struct device *dev;
74
75 /* list of all PHYs on bus */
76 struct phy_device *phy_map[PHY_MAX_ADDR];
77
Matt Porterf896424c2005-11-02 16:13:06 -070078 /* Phy addresses to be ignored when probing */
79 u32 phy_mask;
80
Andy Fleming00db8182005-07-30 19:31:23 -040081 /* Pointer to an array of interrupts, each PHY's
82 * interrupt at the index matching its address */
83 int *irq;
84};
85
86#define PHY_INTERRUPT_DISABLED 0x0
87#define PHY_INTERRUPT_ENABLED 0x80000000
88
89/* PHY state machine states:
90 *
91 * DOWN: PHY device and driver are not ready for anything. probe
92 * should be called if and only if the PHY is in this state,
93 * given that the PHY device exists.
94 * - PHY driver probe function will, depending on the PHY, set
95 * the state to STARTING or READY
96 *
97 * STARTING: PHY device is coming up, and the ethernet driver is
98 * not ready. PHY drivers may set this in the probe function.
99 * If they do, they are responsible for making sure the state is
100 * eventually set to indicate whether the PHY is UP or READY,
101 * depending on the state when the PHY is done starting up.
102 * - PHY driver will set the state to READY
103 * - start will set the state to PENDING
104 *
105 * READY: PHY is ready to send and receive packets, but the
106 * controller is not. By default, PHYs which do not implement
107 * probe will be set to this state by phy_probe(). If the PHY
108 * driver knows the PHY is ready, and the PHY state is STARTING,
109 * then it sets this STATE.
110 * - start will set the state to UP
111 *
112 * PENDING: PHY device is coming up, but the ethernet driver is
113 * ready. phy_start will set this state if the PHY state is
114 * STARTING.
115 * - PHY driver will set the state to UP when the PHY is ready
116 *
117 * UP: The PHY and attached device are ready to do work.
118 * Interrupts should be started here.
119 * - timer moves to AN
120 *
121 * AN: The PHY is currently negotiating the link state. Link is
122 * therefore down for now. phy_timer will set this state when it
123 * detects the state is UP. config_aneg will set this state
124 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
125 * - If autonegotiation finishes, but there's no link, it sets
126 * the state to NOLINK.
127 * - If aneg finishes with link, it sets the state to RUNNING,
128 * and calls adjust_link
129 * - If autonegotiation did not finish after an arbitrary amount
130 * of time, autonegotiation should be tried again if the PHY
131 * supports "magic" autonegotiation (back to AN)
132 * - If it didn't finish, and no magic_aneg, move to FORCING.
133 *
134 * NOLINK: PHY is up, but not currently plugged in.
135 * - If the timer notes that the link comes back, we move to RUNNING
136 * - config_aneg moves to AN
137 * - phy_stop moves to HALTED
138 *
139 * FORCING: PHY is being configured with forced settings
140 * - if link is up, move to RUNNING
141 * - If link is down, we drop to the next highest setting, and
142 * retry (FORCING) after a timeout
143 * - phy_stop moves to HALTED
144 *
145 * RUNNING: PHY is currently up, running, and possibly sending
146 * and/or receiving packets
147 * - timer will set CHANGELINK if we're polling (this ensures the
148 * link state is polled every other cycle of this state machine,
149 * which makes it every other second)
150 * - irq will set CHANGELINK
151 * - config_aneg will set AN
152 * - phy_stop moves to HALTED
153 *
154 * CHANGELINK: PHY experienced a change in link state
155 * - timer moves to RUNNING if link
156 * - timer moves to NOLINK if the link is down
157 * - phy_stop moves to HALTED
158 *
159 * HALTED: PHY is up, but no polling or interrupts are done. Or
160 * PHY is in an error state.
161 *
162 * - phy_start moves to RESUMING
163 *
164 * RESUMING: PHY was halted, but now wants to run again.
165 * - If we are forcing, or aneg is done, timer moves to RUNNING
166 * - If aneg is not done, timer moves to AN
167 * - phy_stop moves to HALTED
168 */
169enum phy_state {
170 PHY_DOWN=0,
171 PHY_STARTING,
172 PHY_READY,
173 PHY_PENDING,
174 PHY_UP,
175 PHY_AN,
176 PHY_RUNNING,
177 PHY_NOLINK,
178 PHY_FORCING,
179 PHY_CHANGELINK,
180 PHY_HALTED,
181 PHY_RESUMING
182};
183
184/* phy_device: An instance of a PHY
185 *
186 * drv: Pointer to the driver for this PHY instance
187 * bus: Pointer to the bus this PHY is on
188 * dev: driver model device structure for this PHY
189 * phy_id: UID for this device found during discovery
190 * state: state of the PHY for management purposes
191 * dev_flags: Device-specific flags used by the PHY driver.
192 * addr: Bus address of PHY
193 * link_timeout: The number of timer firings to wait before the
194 * giving up on the current attempt at acquiring a link
195 * irq: IRQ number of the PHY's interrupt (-1 if none)
196 * phy_timer: The timer for handling the state machine
197 * phy_queue: A work_queue for the interrupt
198 * attached_dev: The attached enet driver's device instance ptr
199 * adjust_link: Callback for the enet controller to respond to
200 * changes in the link state.
201 * adjust_state: Callback for the enet driver to respond to
202 * changes in the state machine.
203 *
204 * speed, duplex, pause, supported, advertising, and
205 * autoneg are used like in mii_if_info
206 *
207 * interrupts currently only supports enabled or disabled,
208 * but could be changed in the future to support enabling
209 * and disabling specific interrupts
210 *
211 * Contains some infrastructure for polling and interrupt
212 * handling, as well as handling shifts in PHY hardware state
213 */
214struct phy_device {
215 /* Information about the PHY type */
216 /* And management functions */
217 struct phy_driver *drv;
218
219 struct mii_bus *bus;
220
221 struct device dev;
222
223 u32 phy_id;
224
225 enum phy_state state;
226
227 u32 dev_flags;
228
229 /* Bus address of the PHY (0-32) */
230 int addr;
231
232 /* forced speed & duplex (no autoneg)
233 * partner speed & duplex & pause (autoneg)
234 */
235 int speed;
236 int duplex;
237 int pause;
238 int asym_pause;
239
240 /* The most recently read link state */
241 int link;
242
243 /* Enabled Interrupts */
244 u32 interrupts;
245
246 /* Union of PHY and Attached devices' supported modes */
247 /* See mii.h for more info */
248 u32 supported;
249 u32 advertising;
250
251 int autoneg;
252
253 int link_timeout;
254
255 /* Interrupt number for this PHY
256 * -1 means no interrupt */
257 int irq;
258
259 /* private data pointer */
260 /* For use by PHYs to maintain extra state */
261 void *priv;
262
263 /* Interrupt and Polling infrastructure */
264 struct work_struct phy_queue;
265 struct timer_list phy_timer;
266
267 spinlock_t lock;
268
269 struct net_device *attached_dev;
270
271 void (*adjust_link)(struct net_device *dev);
272
273 void (*adjust_state)(struct net_device *dev);
274};
275#define to_phy_device(d) container_of(d, struct phy_device, dev)
276
277/* struct phy_driver: Driver structure for a particular PHY type
278 *
279 * phy_id: The result of reading the UID registers of this PHY
280 * type, and ANDing them with the phy_id_mask. This driver
281 * only works for PHYs with IDs which match this field
282 * name: The friendly name of this PHY type
283 * phy_id_mask: Defines the important bits of the phy_id
284 * features: A list of features (speed, duplex, etc) supported
285 * by this PHY
286 * flags: A bitfield defining certain other features this PHY
287 * supports (like interrupts)
288 *
289 * The drivers must implement config_aneg and read_status. All
290 * other functions are optional. Note that none of these
291 * functions should be called from interrupt time. The goal is
292 * for the bus read/write functions to be able to block when the
293 * bus transaction is happening, and be freed up by an interrupt
294 * (The MPC85xx has this ability, though it is not currently
295 * supported in the driver).
296 */
297struct phy_driver {
298 u32 phy_id;
299 char *name;
300 unsigned int phy_id_mask;
301 u32 features;
302 u32 flags;
303
304 /* Called to initialize the PHY,
305 * including after a reset */
306 int (*config_init)(struct phy_device *phydev);
307
308 /* Called during discovery. Used to set
309 * up device-specific structures, if any */
310 int (*probe)(struct phy_device *phydev);
311
312 /* PHY Power Management */
313 int (*suspend)(struct phy_device *phydev);
314 int (*resume)(struct phy_device *phydev);
315
316 /* Configures the advertisement and resets
317 * autonegotiation if phydev->autoneg is on,
318 * forces the speed to the current settings in phydev
319 * if phydev->autoneg is off */
320 int (*config_aneg)(struct phy_device *phydev);
321
322 /* Determines the negotiated speed and duplex */
323 int (*read_status)(struct phy_device *phydev);
324
325 /* Clears any pending interrupts */
326 int (*ack_interrupt)(struct phy_device *phydev);
327
328 /* Enables or disables interrupts */
329 int (*config_intr)(struct phy_device *phydev);
330
331 /* Clears up any memory if needed */
332 void (*remove)(struct phy_device *phydev);
333
334 struct device_driver driver;
335};
336#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
337
338int phy_read(struct phy_device *phydev, u16 regnum);
339int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
340struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
341int phy_clear_interrupt(struct phy_device *phydev);
342int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Andy Fleminge1393452005-08-24 18:46:21 -0500343struct phy_device * phy_attach(struct net_device *dev,
344 const char *phy_id, u32 flags);
345struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
346 void (*handler)(struct net_device *), u32 flags);
347void phy_disconnect(struct phy_device *phydev);
348void phy_detach(struct phy_device *phydev);
349void phy_start(struct phy_device *phydev);
350void phy_stop(struct phy_device *phydev);
351int phy_start_aneg(struct phy_device *phydev);
352
353int mdiobus_register(struct mii_bus *bus);
354void mdiobus_unregister(struct mii_bus *bus);
355void phy_sanitize_settings(struct phy_device *phydev);
356int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400357
358static inline int phy_read_status(struct phy_device *phydev) {
359 return phydev->drv->read_status(phydev);
360}
361
Andy Fleminge1393452005-08-24 18:46:21 -0500362int genphy_config_advert(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400363int genphy_setup_forced(struct phy_device *phydev);
364int genphy_restart_aneg(struct phy_device *phydev);
365int genphy_config_aneg(struct phy_device *phydev);
366int genphy_update_link(struct phy_device *phydev);
367int genphy_read_status(struct phy_device *phydev);
368void phy_driver_unregister(struct phy_driver *drv);
369int phy_driver_register(struct phy_driver *new_driver);
370void phy_prepare_link(struct phy_device *phydev,
371 void (*adjust_link)(struct net_device *));
372void phy_start_machine(struct phy_device *phydev,
373 void (*handler)(struct net_device *));
374void phy_stop_machine(struct phy_device *phydev);
375int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
376int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
377int phy_mii_ioctl(struct phy_device *phydev,
378 struct mii_ioctl_data *mii_data, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500379int phy_start_interrupts(struct phy_device *phydev);
380void phy_print_status(struct phy_device *phydev);
Vitaly Bordug11b0bac2006-08-14 23:00:29 -0700381struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
Andy Fleming00db8182005-07-30 19:31:23 -0400382
383extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400384#endif /* __PHY_H */