blob: 2a097d176ba964faae345a245f516c447701553c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -08002 * pxa2xx_ssp.h
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This driver supports the following PXA CPU/SSP ports:-
11 *
12 * PXA250 SSP
13 * PXA255 SSP, NSSP
14 * PXA26x SSP, NSSP, ASSP
15 * PXA27x SSP1, SSP2, SSP3
eric miao88286452007-12-06 17:56:42 +080016 * PXA3xx SSP1, SSP2, SSP3, SSP4
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 */
18
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -080019#ifndef __LINUX_SSP_H
20#define __LINUX_SSP_H
eric miao88286452007-12-06 17:56:42 +080021
22#include <linux/list.h>
Mark Brown63bef542008-08-26 18:40:57 +010023#include <linux/io.h>
Daniel Mack64462212013-08-12 10:37:18 +020024#include <linux/of.h>
25
eric miao88286452007-12-06 17:56:42 +080026
Eric Miao83f28892010-03-16 17:03:20 +080027/*
28 * SSP Serial Port Registers
29 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
30 * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
31 */
32
33#define SSCR0 (0x00) /* SSP Control Register 0 */
34#define SSCR1 (0x04) /* SSP Control Register 1 */
35#define SSSR (0x08) /* SSP Status Register */
36#define SSITR (0x0C) /* SSP Interrupt Test Register */
37#define SSDR (0x10) /* SSP Data Write/Data Read Register */
38
39#define SSTO (0x28) /* SSP Time Out Register */
Jarkko Nikulac4827bb2014-12-18 15:04:21 +020040#define DDS_RATE (0x28) /* SSP DDS Clock Rate Register (Intel Quark) */
Eric Miao83f28892010-03-16 17:03:20 +080041#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
42#define SSTSA (0x30) /* SSP Tx Timeslot Active */
43#define SSRSA (0x34) /* SSP Rx Timeslot Active */
44#define SSTSS (0x38) /* SSP Timeslot Status */
45#define SSACD (0x3C) /* SSP Audio Clock Divider */
Eric Miao83f28892010-03-16 17:03:20 +080046#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
Eric Miao83f28892010-03-16 17:03:20 +080047
48/* Common PXA2xx bits first */
49#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
50#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
51#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
52#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
53#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
54#define SSCR0_National (0x2 << 4) /* National Microwire */
55#define SSCR0_ECS (1 << 6) /* External clock select */
56#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
57#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */
58
Haojian Zhuang004690f2010-03-19 11:52:39 -040059/* PXA27x, PXA3xx */
Eric Miao83f28892010-03-16 17:03:20 +080060#define SSCR0_EDSS (1 << 20) /* Extended data size select */
61#define SSCR0_NCS (1 << 21) /* Network clock select */
62#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
63#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
64#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
65#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
Haojian Zhuang004690f2010-03-19 11:52:39 -040066#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
Eric Miao83f28892010-03-16 17:03:20 +080067#define SSCR0_ACS (1 << 30) /* Audio clock select */
68#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
Eric Miao83f28892010-03-16 17:03:20 +080069
Eric Miao83f28892010-03-16 17:03:20 +080070
71#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
72#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
73#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
74#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
75#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
76#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
Eric Miao83f28892010-03-16 17:03:20 +080077
Sebastian Andrzej Siewior2a8626a2010-11-22 17:12:17 -080078#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
Eric Miao83f28892010-03-16 17:03:20 +080079#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
80#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
81#define SSSR_BSY (1 << 4) /* SSP Busy */
82#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
83#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
84#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
Sebastian Andrzej Siewiord0777f22010-11-22 17:12:16 -080085
86#ifdef CONFIG_ARCH_PXA
87#define RX_THRESH_DFLT 8
88#define TX_THRESH_DFLT 8
89
90#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
91#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
92
93#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
94#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
95#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
96#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
97
98#else
99
100#define RX_THRESH_DFLT 2
101#define TX_THRESH_DFLT 2
102
103#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
104#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
105
106#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
107#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
108#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
109#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
110#endif
Eric Miao83f28892010-03-16 17:03:20 +0800111
Weike Chene5262d02014-11-26 02:35:10 -0800112/* QUARK_X1000 SSCR0 bit definition */
113#define QUARK_X1000_SSCR0_DSS (0x1F) /* Data Size Select (mask) */
114#define QUARK_X1000_SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..32] */
115#define QUARK_X1000_SSCR0_FRF (0x3 << 5) /* FRame Format (mask) */
116#define QUARK_X1000_SSCR0_Motorola (0x0 << 5) /* Motorola's Serial Peripheral Interface (SPI) */
117
118#define RX_THRESH_QUARK_X1000_DFLT 1
119#define TX_THRESH_QUARK_X1000_DFLT 16
120
121#define QUARK_X1000_SSSR_TFL_MASK (0x1F << 8) /* Transmit FIFO Level mask */
122#define QUARK_X1000_SSSR_RFL_MASK (0x1F << 13) /* Receive FIFO Level mask */
123
124#define QUARK_X1000_SSCR1_TFT (0x1F << 6) /* Transmit FIFO Threshold (mask) */
125#define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..32] */
126#define QUARK_X1000_SSCR1_RFT (0x1F << 11) /* Receive FIFO Threshold (mask) */
127#define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11) /* level [1..32] */
128#define QUARK_X1000_SSCR1_STRF (1 << 17) /* Select FIFO or EFWR */
129#define QUARK_X1000_SSCR1_EFWR (1 << 16) /* Enable FIFO Write/Read */
130
Eric Miao83f28892010-03-16 17:03:20 +0800131/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
132#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
133#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
134#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
135#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
136#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
137#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
138#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
139#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
140#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
141#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
142#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
143#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
144#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
145#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
146#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300147#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
Eric Miao83f28892010-03-16 17:03:20 +0800148#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
149#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
150#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
151
152#define SSSR_BCE (1 << 23) /* Bit Count Error */
153#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
154#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
155#define SSSR_EOC (1 << 20) /* End Of Chain */
156#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
157#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
158
Eric Miao83f28892010-03-16 17:03:20 +0800159
Eric Miao83f28892010-03-16 17:03:20 +0800160#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
Haojian Zhuang004690f2010-03-19 11:52:39 -0400161#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
162#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
163#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
164#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
165#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
166#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
167#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
168#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
169
170/* PXA3xx */
171#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
172#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
173#define SSPSP_TIMING_MASK (0x7f8001f0)
Eric Miao83f28892010-03-16 17:03:20 +0800174
175#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
176#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
177#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
Eric Miao83f28892010-03-16 17:03:20 +0800178#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
Eric Miao83f28892010-03-16 17:03:20 +0800179
Mika Westerberga0d26422013-01-22 12:26:32 +0200180/* LPSS SSP */
181#define SSITF 0x44 /* TX FIFO trigger level */
182#define SSITF_TxLoThresh(x) (((x) - 1) << 8)
183#define SSITF_TxHiThresh(x) ((x) - 1)
184
185#define SSIRF 0x48 /* RX FIFO trigger level */
186#define SSIRF_RxThresh(x) ((x) - 1)
187
eric miao88286452007-12-06 17:56:42 +0800188enum pxa_ssp_type {
189 SSP_UNDEFINED = 0,
190 PXA25x_SSP, /* pxa 210, 250, 255, 26x */
191 PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
192 PXA27x_SSP,
Qiao Zhou972a55b2012-06-04 10:41:04 +0800193 PXA3xx_SSP,
Haojian Zhuang7e499222010-03-19 11:53:17 -0400194 PXA168_SSP,
Qiao Zhou60172212012-06-04 10:41:03 +0800195 PXA910_SSP,
Sebastian Andrzej Siewior2a8626a2010-11-22 17:12:17 -0800196 CE4100_SSP,
Weike Chene5262d02014-11-26 02:35:10 -0800197 QUARK_X1000_SSP,
Jarkko Nikuladccf7362015-06-04 16:55:11 +0300198 LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
Jarkko Nikula03fbf482015-06-04 16:55:10 +0300199 LPSS_BYT_SSP,
Mika Westerberg30f3a6a2016-02-08 17:14:31 +0200200 LPSS_BSW_SSP,
Jarkko Nikula34cadd92015-07-30 16:30:07 +0300201 LPSS_SPT_SSP,
Jarkko Nikulab7c08cf2015-10-28 15:13:42 +0200202 LPSS_BXT_SSP,
eric miao88286452007-12-06 17:56:42 +0800203};
204
205struct ssp_device {
206 struct platform_device *pdev;
207 struct list_head node;
208
209 struct clk *clk;
210 void __iomem *mmio_base;
211 unsigned long phys_base;
212
213 const char *label;
214 int port_id;
215 int type;
216 int use_count;
217 int irq;
218 int drcmr_rx;
219 int drcmr_tx;
Daniel Mack64462212013-08-12 10:37:18 +0200220
221 struct device_node *of_node;
eric miao88286452007-12-06 17:56:42 +0800222};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223
Mark Brown63bef542008-08-26 18:40:57 +0100224/**
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400225 * pxa_ssp_write_reg - Write to a SSP register
Mark Brown63bef542008-08-26 18:40:57 +0100226 *
227 * @dev: SSP device to access
228 * @reg: Register to write to
229 * @val: Value to be written.
230 */
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400231static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
Mark Brown63bef542008-08-26 18:40:57 +0100232{
233 __raw_writel(val, dev->mmio_base + reg);
234}
235
236/**
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400237 * pxa_ssp_read_reg - Read from a SSP register
Mark Brown63bef542008-08-26 18:40:57 +0100238 *
239 * @dev: SSP device to access
240 * @reg: Register to read from
241 */
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400242static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
Mark Brown63bef542008-08-26 18:40:57 +0100243{
244 return __raw_readl(dev->mmio_base + reg);
245}
246
Arnd Bergmann1ced9a52014-02-18 16:33:07 +0100247#if IS_ENABLED(CONFIG_PXA_SSP)
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400248struct ssp_device *pxa_ssp_request(int port, const char *label);
249void pxa_ssp_free(struct ssp_device *);
Daniel Mack64462212013-08-12 10:37:18 +0200250struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
251 const char *label);
Mika Westerberg851bacf2013-01-07 12:44:33 +0200252#else
253static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
254{
255 return NULL;
256}
Daniel Mack64462212013-08-12 10:37:18 +0200257static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n,
258 const char *name)
259{
260 return NULL;
261}
Mika Westerberg851bacf2013-01-07 12:44:33 +0200262static inline void pxa_ssp_free(struct ssp_device *ssp) {}
263#endif
264
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -0800265#endif