blob: 0485c53db2b5dc64273ba5661918710c686a61e6 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifdef __KERNEL__
Paul Mackerras1b923132005-10-10 22:54:57 +10002#ifndef _ASM_POWERPC_IRQ_H
3#define _ASM_POWERPC_IRQ_H
4
5/*
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070011
Paul Mackerras1b923132005-10-10 22:54:57 +100012#include <linux/threads.h>
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +100013#include <linux/list.h>
14#include <linux/radix-tree.h>
Paul Mackerras1b923132005-10-10 22:54:57 +100015
16#include <asm/types.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070017#include <asm/atomic.h>
18
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +100019
20#define get_irq_desc(irq) (&irq_desc[(irq)])
21
22/* Define a way to iterate across irqs. */
23#define for_each_irq(i) \
24 for ((i) = 0; (i) < NR_IRQS; ++(i))
25
26extern atomic_t ppc_n_lost_interrupts;
27
28#ifdef CONFIG_PPC_MERGE
29
30/* This number is used when no interrupt has been assigned */
31#define NO_IRQ (0)
32
33/* This is a special irq number to return from get_irq() to tell that
34 * no interrupt happened _and_ ignore it (don't count it as bad). Some
35 * platforms like iSeries rely on that.
36 */
37#define NO_IRQ_IGNORE ((unsigned int)-1)
38
39/* Total number of virq in the platform (make it a CONFIG_* option ? */
40#define NR_IRQS 512
41
42/* Number of irqs reserved for the legacy controller */
43#define NUM_ISA_INTERRUPTS 16
44
45/* This type is the placeholder for a hardware interrupt number. It has to
46 * be big enough to enclose whatever representation is used by a given
47 * platform.
48 */
49typedef unsigned long irq_hw_number_t;
50
51/* Interrupt controller "host" data structure. This could be defined as a
52 * irq domain controller. That is, it handles the mapping between hardware
53 * and virtual interrupt numbers for a given interrupt domain. The host
54 * structure is generally created by the PIC code for a given PIC instance
55 * (though a host can cover more than one PIC if they have a flat number
56 * model). It's the host callbacks that are responsible for setting the
57 * irq_chip on a given irq_desc after it's been mapped.
58 *
59 * The host code and data structures are fairly agnostic to the fact that
60 * we use an open firmware device-tree. We do have references to struct
61 * device_node in two places: in irq_find_host() to find the host matching
62 * a given interrupt controller node, and of course as an argument to its
63 * counterpart host->ops->match() callback. However, those are treated as
64 * generic pointers by the core and the fact that it's actually a device-node
65 * pointer is purely a convention between callers and implementation. This
66 * code could thus be used on other architectures by replacing those two
67 * by some sort of arch-specific void * "token" used to identify interrupt
68 * controllers.
69 */
70struct irq_host;
71struct radix_tree_root;
72
73/* Functions below are provided by the host and called whenever a new mapping
74 * is created or an old mapping is disposed. The host can then proceed to
75 * whatever internal data structures management is required. It also needs
76 * to setup the irq_desc when returning from map().
77 */
78struct irq_host_ops {
79 /* Match an interrupt controller device node to a host, returns
80 * 1 on a match
81 */
82 int (*match)(struct irq_host *h, struct device_node *node);
83
84 /* Create or update a mapping between a virtual irq number and a hw
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -070085 * irq number. This is called only once for a given mapping.
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +100086 */
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -070087 int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +100088
89 /* Dispose of such a mapping */
90 void (*unmap)(struct irq_host *h, unsigned int virq);
91
Ishizaki Kouacc900e2007-01-12 09:58:39 +090092 /* Update of such a mapping */
93 void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
94
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +100095 /* Translate device-tree interrupt specifier from raw format coming
96 * from the firmware to a irq_hw_number_t (interrupt line number) and
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -070097 * type (sense) that can be passed to set_irq_type(). In the absence
98 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
99 * will return the hw number in the first cell and IRQ_TYPE_NONE for
100 * the type (which amount to keeping whatever default value the
101 * interrupt controller has for that line)
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000102 */
103 int (*xlate)(struct irq_host *h, struct device_node *ctrler,
104 u32 *intspec, unsigned int intsize,
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -0700105 irq_hw_number_t *out_hwirq, unsigned int *out_type);
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000106};
107
108struct irq_host {
109 struct list_head link;
110
111 /* type of reverse mapping technique */
112 unsigned int revmap_type;
113#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
114#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
115#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
116#define IRQ_HOST_MAP_TREE 3 /* radix tree */
117 union {
118 struct {
119 unsigned int size;
120 unsigned int *revmap;
121 } linear;
122 struct radix_tree_root tree;
123 } revmap_data;
124 struct irq_host_ops *ops;
125 void *host_data;
126 irq_hw_number_t inval_irq;
127};
128
129/* The main irq map itself is an array of NR_IRQ entries containing the
130 * associate host and irq number. An entry with a host of NULL is free.
131 * An entry can be allocated if it's free, the allocator always then sets
132 * hwirq first to the host's invalid irq number and then fills ops.
133 */
134struct irq_map_entry {
135 irq_hw_number_t hwirq;
136 struct irq_host *host;
137};
138
139extern struct irq_map_entry irq_map[NR_IRQS];
140
Olof Johansson35923f122007-06-04 14:47:04 +1000141extern irq_hw_number_t virq_to_hw(unsigned int virq);
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000142
Michael Ellerman40681b92006-08-02 11:13:50 +1000143/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000144 * irq_alloc_host - Allocate a new irq_host data structure
145 * @node: device-tree node of the interrupt controller
146 * @revmap_type: type of reverse mapping to use
147 * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
148 * @ops: map/unmap host callbacks
149 * @inval_irq: provide a hw number in that host space that is always invalid
150 *
151 * Allocates and initialize and irq_host structure. Note that in the case of
152 * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
153 * for all legacy interrupts except 0 (which is always the invalid irq for
154 * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
155 * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
156 * later during boot automatically (the reverse mapping will use the slow path
157 * until that happens).
158 */
159extern struct irq_host *irq_alloc_host(unsigned int revmap_type,
160 unsigned int revmap_arg,
161 struct irq_host_ops *ops,
162 irq_hw_number_t inval_irq);
163
164
Michael Ellerman40681b92006-08-02 11:13:50 +1000165/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000166 * irq_find_host - Locates a host for a given device node
167 * @node: device-tree node of the interrupt controller
168 */
169extern struct irq_host *irq_find_host(struct device_node *node);
170
171
Michael Ellerman40681b92006-08-02 11:13:50 +1000172/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000173 * irq_set_default_host - Set a "default" host
174 * @host: default host pointer
175 *
176 * For convenience, it's possible to set a "default" host that will be used
177 * whenever NULL is passed to irq_create_mapping(). It makes life easier for
178 * platforms that want to manipulate a few hard coded interrupt numbers that
179 * aren't properly represented in the device-tree.
180 */
181extern void irq_set_default_host(struct irq_host *host);
182
183
Michael Ellerman40681b92006-08-02 11:13:50 +1000184/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000185 * irq_set_virq_count - Set the maximum number of virt irqs
186 * @count: number of linux virtual irqs, capped with NR_IRQS
187 *
188 * This is mainly for use by platforms like iSeries who want to program
189 * the virtual irq number in the controller to avoid the reverse mapping
190 */
191extern void irq_set_virq_count(unsigned int count);
192
193
Michael Ellerman40681b92006-08-02 11:13:50 +1000194/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000195 * irq_create_mapping - Map a hardware interrupt into linux virq space
196 * @host: host owning this hardware interrupt or NULL for default host
197 * @hwirq: hardware irq number in that host space
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000198 *
199 * Only one mapping per hardware interrupt is permitted. Returns a linux
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -0700200 * virq number.
201 * If the sense/trigger is to be specified, set_irq_type() should be called
202 * on the number returned from that call.
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000203 */
204extern unsigned int irq_create_mapping(struct irq_host *host,
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -0700205 irq_hw_number_t hwirq);
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000206
207
Michael Ellerman40681b92006-08-02 11:13:50 +1000208/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000209 * irq_dispose_mapping - Unmap an interrupt
210 * @virq: linux virq number of the interrupt to unmap
211 */
212extern void irq_dispose_mapping(unsigned int virq);
213
Michael Ellerman40681b92006-08-02 11:13:50 +1000214/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000215 * irq_find_mapping - Find a linux virq from an hw irq number.
216 * @host: host owning this hardware interrupt
217 * @hwirq: hardware irq number in that host space
218 *
219 * This is a slow path, for use by generic code. It's expected that an
220 * irq controller implementation directly calls the appropriate low level
221 * mapping function.
222 */
223extern unsigned int irq_find_mapping(struct irq_host *host,
224 irq_hw_number_t hwirq);
225
Michael Ellermanee51de52007-06-04 23:00:00 +1000226/**
227 * irq_create_direct_mapping - Allocate a virq for direct mapping
228 * @host: host to allocate the virq for or NULL for default host
229 *
230 * This routine is used for irq controllers which can choose the hardware
231 * interrupt numbers they generate. In such a case it's simplest to use
232 * the linux virq as the hardware interrupt number.
233 */
234extern unsigned int irq_create_direct_mapping(struct irq_host *host);
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000235
Michael Ellerman40681b92006-08-02 11:13:50 +1000236/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000237 * irq_radix_revmap - Find a linux virq from a hw irq number.
238 * @host: host owning this hardware interrupt
239 * @hwirq: hardware irq number in that host space
240 *
241 * This is a fast path, for use by irq controller code that uses radix tree
242 * revmaps
243 */
244extern unsigned int irq_radix_revmap(struct irq_host *host,
245 irq_hw_number_t hwirq);
246
Michael Ellerman40681b92006-08-02 11:13:50 +1000247/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000248 * irq_linear_revmap - Find a linux virq from a hw irq number.
249 * @host: host owning this hardware interrupt
250 * @hwirq: hardware irq number in that host space
251 *
252 * This is a fast path, for use by irq controller code that uses linear
253 * revmaps. It does fallback to the slow path if the revmap doesn't exist
254 * yet and will create the revmap entry with appropriate locking
255 */
256
257extern unsigned int irq_linear_revmap(struct irq_host *host,
258 irq_hw_number_t hwirq);
259
260
261
Michael Ellerman40681b92006-08-02 11:13:50 +1000262/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000263 * irq_alloc_virt - Allocate virtual irq numbers
264 * @host: host owning these new virtual irqs
265 * @count: number of consecutive numbers to allocate
266 * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
267 *
268 * This is a low level function that is used internally by irq_create_mapping()
269 * and that can be used by some irq controllers implementations for things
270 * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
271 */
272extern unsigned int irq_alloc_virt(struct irq_host *host,
273 unsigned int count,
274 unsigned int hint);
275
Michael Ellerman40681b92006-08-02 11:13:50 +1000276/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000277 * irq_free_virt - Free virtual irq numbers
278 * @virq: virtual irq number of the first interrupt to free
279 * @count: number of interrupts to free
280 *
281 * This function is the opposite of irq_alloc_virt. It will not clear reverse
282 * maps, this should be done previously by unmap'ing the interrupt. In fact,
283 * all interrupts covered by the range being freed should have been unmapped
284 * prior to calling this.
285 */
286extern void irq_free_virt(unsigned int virq, unsigned int count);
287
288
289/* -- OF helpers -- */
290
291/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
292 * @controller: Device node of the interrupt controller
293 * @inspec: Interrupt specifier from the device-tree
294 * @intsize: Size of the interrupt specifier from the device-tree
295 *
296 * This function is identical to irq_create_mapping except that it takes
297 * as input informations straight from the device-tree (typically the results
Benjamin Herrenschmidt6e99e452006-07-10 04:44:42 -0700298 * of the of_irq_map_*() functions.
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000299 */
300extern unsigned int irq_create_of_mapping(struct device_node *controller,
301 u32 *intspec, unsigned int intsize);
302
303
304/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
305 * @device: Device node of the device whose interrupt is to be mapped
306 * @index: Index of the interrupt to map
307 *
308 * This function is a wrapper that chains of_irq_map_one() and
309 * irq_create_of_mapping() to make things easier to callers
310 */
311extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
312
313/* -- End OF helpers -- */
314
Michael Ellerman40681b92006-08-02 11:13:50 +1000315/**
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000316 * irq_early_init - Init irq remapping subsystem
317 */
318extern void irq_early_init(void);
319
320static __inline__ int irq_canonicalize(int irq)
321{
322 return irq;
323}
324
325
326#else /* CONFIG_PPC_MERGE */
327
328/* This number is used when no interrupt has been assigned */
Paul Mackerras1b923132005-10-10 22:54:57 +1000329#define NO_IRQ (-1)
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000330#define NO_IRQ_IGNORE (-2)
331
Paul Mackerras1b923132005-10-10 22:54:57 +1000332
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333/*
334 * These constants are used for passing information about interrupt
335 * signal polarity and level/edge sensing to the low-level PIC chip
336 * drivers.
337 */
338#define IRQ_SENSE_MASK 0x1
339#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
340#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
341
342#define IRQ_POLARITY_MASK 0x2
343#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
344#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
345
Paul Mackerras1b923132005-10-10 22:54:57 +1000346
Linus Torvalds1da177e2005-04-16 15:20:36 -0700347#if defined(CONFIG_40x)
348#include <asm/ibm4xx.h>
349
350#ifndef NR_BOARD_IRQS
351#define NR_BOARD_IRQS 0
352#endif
353
354#ifndef UIC_WIDTH /* Number of interrupts per device */
355#define UIC_WIDTH 32
356#endif
357
358#ifndef NR_UICS /* number of UIC devices */
359#define NR_UICS 1
360#endif
361
362#if defined (CONFIG_403)
363/*
364 * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
365 * 32 possible interrupts, a majority of which are not implemented on
366 * all cores. There are six configurable, external interrupt pins and
367 * there are eight internal interrupts for the on-chip serial port
368 * (SPU), DMA controller, and JTAG controller.
369 *
370 */
371
372#define NR_AIC_IRQS 32
373#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
374
375#elif !defined (CONFIG_403)
376
377/*
378 * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
379 * possible interrupts as well. There are seven, configurable external
380 * interrupt pins and there are 17 internal interrupts for the on-chip
381 * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
382 *
383 */
384
385
386#define NR_UIC_IRQS UIC_WIDTH
387#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
388#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389
390#elif defined(CONFIG_44x)
391#include <asm/ibm44x.h>
392
393#define NR_UIC_IRQS 32
394#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
395
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396#elif defined(CONFIG_8xx)
397
398/* Now include the board configuration specific associations.
399*/
400#include <asm/mpc8xx.h>
401
402/* The MPC8xx cores have 16 possible interrupts. There are eight
403 * possible level sensitive interrupts assigned and generated internally
404 * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
405 * There are eight external interrupts (IRQs) that can be configured
406 * as either level or edge sensitive.
407 *
408 * On some implementations, there is also the possibility of an 8259
409 * through the PCI and PCI-ISA bridges.
410 *
411 * We are "flattening" the interrupt vectors of the cascaded CPM
412 * and 8259 interrupt controllers so that we can uniquely identify
413 * any interrupt source with a single integer.
414 */
415#define NR_SIU_INTS 16
416#define NR_CPM_INTS 32
417#ifndef NR_8259_INTS
418#define NR_8259_INTS 0
419#endif
420
421#define SIU_IRQ_OFFSET 0
422#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
423#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
424
425#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
426
427/* These values must be zero-based and map 1:1 with the SIU configuration.
428 * They are used throughout the 8xx I/O subsystem to generate
429 * interrupt masks, flags, and other control patterns. This is why the
430 * current kernel assumption of the 8259 as the base controller is such
431 * a pain in the butt.
432 */
433#define SIU_IRQ0 (0) /* Highest priority */
434#define SIU_LEVEL0 (1)
435#define SIU_IRQ1 (2)
436#define SIU_LEVEL1 (3)
437#define SIU_IRQ2 (4)
438#define SIU_LEVEL2 (5)
439#define SIU_IRQ3 (6)
440#define SIU_LEVEL3 (7)
441#define SIU_IRQ4 (8)
442#define SIU_LEVEL4 (9)
443#define SIU_IRQ5 (10)
444#define SIU_LEVEL5 (11)
445#define SIU_IRQ6 (12)
446#define SIU_LEVEL6 (13)
447#define SIU_IRQ7 (14)
448#define SIU_LEVEL7 (15)
449
Vitaly Bordug514ccd42005-09-16 19:28:00 -0700450#define MPC8xx_INT_FEC1 SIU_LEVEL1
451#define MPC8xx_INT_FEC2 SIU_LEVEL3
452
453#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1)
454#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2)
455#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3)
456#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4)
457#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1)
458#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2)
459
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460/* The internal interrupts we can configure as we see fit.
461 * My personal preference is CPM at level 2, which puts it above the
462 * MBX PCI/ISA/IDE interrupts.
463 */
464#ifndef PIT_INTERRUPT
465#define PIT_INTERRUPT SIU_LEVEL0
466#endif
467#ifndef CPM_INTERRUPT
468#define CPM_INTERRUPT SIU_LEVEL2
469#endif
470#ifndef PCMCIA_INTERRUPT
471#define PCMCIA_INTERRUPT SIU_LEVEL6
472#endif
473#ifndef DEC_INTERRUPT
474#define DEC_INTERRUPT SIU_LEVEL7
475#endif
476
477/* Some internal interrupt registers use an 8-bit mask for the interrupt
478 * level instead of a number.
479 */
480#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
481
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482#elif defined(CONFIG_83xx)
483#include <asm/mpc83xx.h>
484
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485#define NR_IRQS (NR_IPIC_INTS)
486
487#elif defined(CONFIG_85xx)
488/* Now include the board configuration specific associations.
489*/
490#include <asm/mpc85xx.h>
491
Kumar Gala65145e02005-06-21 17:15:25 -0700492/* The MPC8548 openpic has 48 internal interrupts and 12 external
Linus Torvalds1da177e2005-04-16 15:20:36 -0700493 * interrupts.
494 *
495 * We are "flattening" the interrupt vectors of the cascaded CPM
496 * so that we can uniquely identify any interrupt source with a
497 * single integer.
498 */
499#define NR_CPM_INTS 64
Kumar Gala65145e02005-06-21 17:15:25 -0700500#define NR_EPIC_INTS 60
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501#ifndef NR_8259_INTS
502#define NR_8259_INTS 0
503#endif
504#define NUM_8259_INTERRUPTS NR_8259_INTS
505
506#ifndef CPM_IRQ_OFFSET
507#define CPM_IRQ_OFFSET 0
508#endif
509
510#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
511
512/* Internal IRQs on MPC85xx OpenPIC */
513
514#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
515#ifdef CONFIG_CPM2
516#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
517#else
518#define MPC85xx_OPENPIC_IRQ_OFFSET 0
519#endif
520#endif
521
522/* Not all of these exist on all MPC85xx implementations */
523#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
524#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
525#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
526#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
527#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
528#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
529#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
530#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
531#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
532#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
533#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
534#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
535#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
536#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
537#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
538#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
Kumar Gala5b37b702005-06-21 17:15:18 -0700539#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET)
540#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET)
541#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
543#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
544#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
Kumar Gala5b37b702005-06-21 17:15:18 -0700545#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET)
546#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET)
547#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
549#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
550#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
551#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
552#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
553#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
554#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
555
556/* The 12 external interrupt lines */
Kumar Gala65145e02005-06-21 17:15:25 -0700557#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
558#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
559#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
560#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
561#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
562#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
563#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
564#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
565#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
566#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
567#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
568#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700569
570/* CPM related interrupts */
571#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET)
572#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET)
573#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET)
574#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET)
575#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
576#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
577#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET)
578#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET)
579#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET)
580#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET)
581#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET)
582#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET)
583#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET)
584#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET)
585#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET)
586#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET)
587#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
588#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
589#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
590#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
591#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET)
592#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET)
593#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET)
594#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET)
595#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET)
596#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET)
597#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET)
598#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET)
599#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET)
600#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET)
601#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET)
602#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET)
603#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET)
604#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET)
605#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
606#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
607
Jon Loeliger6b543402006-06-17 17:52:51 -0500608#elif defined(CONFIG_PPC_86xx)
609#include <asm/mpc86xx.h>
610
611#define NR_EPIC_INTS 48
612#ifndef NR_8259_INTS
613#define NR_8259_INTS 16 /*ULI 1575 can route 12 interrupts */
614#endif
615#define NUM_8259_INTERRUPTS NR_8259_INTS
616
617#ifndef I8259_OFFSET
618#define I8259_OFFSET 0
619#endif
620
621#define NR_IRQS 256
622
623/* Internal IRQs on MPC86xx OpenPIC */
624
625#ifndef MPC86xx_OPENPIC_IRQ_OFFSET
626#define MPC86xx_OPENPIC_IRQ_OFFSET NR_8259_INTS
627#endif
628
629/* The 48 internal sources */
630#define MPC86xx_IRQ_NULL ( 0 + MPC86xx_OPENPIC_IRQ_OFFSET)
631#define MPC86xx_IRQ_MCM ( 1 + MPC86xx_OPENPIC_IRQ_OFFSET)
632#define MPC86xx_IRQ_DDR ( 2 + MPC86xx_OPENPIC_IRQ_OFFSET)
633#define MPC86xx_IRQ_LBC ( 3 + MPC86xx_OPENPIC_IRQ_OFFSET)
634#define MPC86xx_IRQ_DMA0 ( 4 + MPC86xx_OPENPIC_IRQ_OFFSET)
635#define MPC86xx_IRQ_DMA1 ( 5 + MPC86xx_OPENPIC_IRQ_OFFSET)
636#define MPC86xx_IRQ_DMA2 ( 6 + MPC86xx_OPENPIC_IRQ_OFFSET)
637#define MPC86xx_IRQ_DMA3 ( 7 + MPC86xx_OPENPIC_IRQ_OFFSET)
638
639/* no 10,11 */
640#define MPC86xx_IRQ_UART2 (12 + MPC86xx_OPENPIC_IRQ_OFFSET)
641#define MPC86xx_IRQ_TSEC1_TX (13 + MPC86xx_OPENPIC_IRQ_OFFSET)
642#define MPC86xx_IRQ_TSEC1_RX (14 + MPC86xx_OPENPIC_IRQ_OFFSET)
643#define MPC86xx_IRQ_TSEC3_TX (15 + MPC86xx_OPENPIC_IRQ_OFFSET)
644#define MPC86xx_IRQ_TSEC3_RX (16 + MPC86xx_OPENPIC_IRQ_OFFSET)
645#define MPC86xx_IRQ_TSEC3_ERROR (17 + MPC86xx_OPENPIC_IRQ_OFFSET)
646#define MPC86xx_IRQ_TSEC1_ERROR (18 + MPC86xx_OPENPIC_IRQ_OFFSET)
647#define MPC86xx_IRQ_TSEC2_TX (19 + MPC86xx_OPENPIC_IRQ_OFFSET)
648#define MPC86xx_IRQ_TSEC2_RX (20 + MPC86xx_OPENPIC_IRQ_OFFSET)
649#define MPC86xx_IRQ_TSEC4_TX (21 + MPC86xx_OPENPIC_IRQ_OFFSET)
650#define MPC86xx_IRQ_TSEC4_RX (22 + MPC86xx_OPENPIC_IRQ_OFFSET)
651#define MPC86xx_IRQ_TSEC4_ERROR (23 + MPC86xx_OPENPIC_IRQ_OFFSET)
652#define MPC86xx_IRQ_TSEC2_ERROR (24 + MPC86xx_OPENPIC_IRQ_OFFSET)
653/* no 25 */
654#define MPC86xx_IRQ_UART1 (26 + MPC86xx_OPENPIC_IRQ_OFFSET)
655#define MPC86xx_IRQ_IIC (27 + MPC86xx_OPENPIC_IRQ_OFFSET)
656#define MPC86xx_IRQ_PERFMON (28 + MPC86xx_OPENPIC_IRQ_OFFSET)
657/* no 29,30,31 */
658#define MPC86xx_IRQ_SRIO_ERROR (32 + MPC86xx_OPENPIC_IRQ_OFFSET)
659#define MPC86xx_IRQ_SRIO_OUT_BELL (33 + MPC86xx_OPENPIC_IRQ_OFFSET)
660#define MPC86xx_IRQ_SRIO_IN_BELL (34 + MPC86xx_OPENPIC_IRQ_OFFSET)
661/* no 35,36 */
662#define MPC86xx_IRQ_SRIO_OUT_MSG1 (37 + MPC86xx_OPENPIC_IRQ_OFFSET)
663#define MPC86xx_IRQ_SRIO_IN_MSG1 (38 + MPC86xx_OPENPIC_IRQ_OFFSET)
664#define MPC86xx_IRQ_SRIO_OUT_MSG2 (39 + MPC86xx_OPENPIC_IRQ_OFFSET)
665#define MPC86xx_IRQ_SRIO_IN_MSG2 (40 + MPC86xx_OPENPIC_IRQ_OFFSET)
666
667/* The 12 external interrupt lines */
668#define MPC86xx_IRQ_EXT_BASE 48
669#define MPC86xx_IRQ_EXT0 (0 + MPC86xx_IRQ_EXT_BASE \
670 + MPC86xx_OPENPIC_IRQ_OFFSET)
671#define MPC86xx_IRQ_EXT1 (1 + MPC86xx_IRQ_EXT_BASE \
672 + MPC86xx_OPENPIC_IRQ_OFFSET)
673#define MPC86xx_IRQ_EXT2 (2 + MPC86xx_IRQ_EXT_BASE \
674 + MPC86xx_OPENPIC_IRQ_OFFSET)
675#define MPC86xx_IRQ_EXT3 (3 + MPC86xx_IRQ_EXT_BASE \
676 + MPC86xx_OPENPIC_IRQ_OFFSET)
677#define MPC86xx_IRQ_EXT4 (4 + MPC86xx_IRQ_EXT_BASE \
678 + MPC86xx_OPENPIC_IRQ_OFFSET)
679#define MPC86xx_IRQ_EXT5 (5 + MPC86xx_IRQ_EXT_BASE \
680 + MPC86xx_OPENPIC_IRQ_OFFSET)
681#define MPC86xx_IRQ_EXT6 (6 + MPC86xx_IRQ_EXT_BASE \
682 + MPC86xx_OPENPIC_IRQ_OFFSET)
683#define MPC86xx_IRQ_EXT7 (7 + MPC86xx_IRQ_EXT_BASE \
684 + MPC86xx_OPENPIC_IRQ_OFFSET)
685#define MPC86xx_IRQ_EXT8 (8 + MPC86xx_IRQ_EXT_BASE \
686 + MPC86xx_OPENPIC_IRQ_OFFSET)
687#define MPC86xx_IRQ_EXT9 (9 + MPC86xx_IRQ_EXT_BASE \
688 + MPC86xx_OPENPIC_IRQ_OFFSET)
689#define MPC86xx_IRQ_EXT10 (10 + MPC86xx_IRQ_EXT_BASE \
690 + MPC86xx_OPENPIC_IRQ_OFFSET)
691#define MPC86xx_IRQ_EXT11 (11 + MPC86xx_IRQ_EXT_BASE \
692 + MPC86xx_OPENPIC_IRQ_OFFSET)
693
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694#else /* CONFIG_40x + CONFIG_8xx */
695/*
696 * this is the # irq's for all ppc arch's (pmac/chrp/prep)
697 * so it is the max of them all
698 */
699#define NR_IRQS 256
Paul Mackerras1b923132005-10-10 22:54:57 +1000700#define __DO_IRQ_CANON 1
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701
702#ifndef CONFIG_8260
703
704#define NUM_8259_INTERRUPTS 16
705
706#else /* CONFIG_8260 */
707
708/* The 8260 has an internal interrupt controller with a maximum of
709 * 64 IRQs. We will use NR_IRQs from above since it is large enough.
710 * Don't be confused by the 8260 documentation where they list an
711 * "interrupt number" and "interrupt vector". We are only interested
712 * in the interrupt vector. There are "reserved" holes where the
713 * vector number increases, but the interrupt number in the table does not.
714 * (Document errata updates have fixed this...make sure you have up to
715 * date processor documentation -- Dan).
716 */
717
718#ifndef CPM_IRQ_OFFSET
719#define CPM_IRQ_OFFSET 0
720#endif
721
722#define NR_CPM_INTS 64
723
724#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
725#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
726#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
727#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
728#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
729#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
730#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
731#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
732#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
733#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
734#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
Kumar Gala8e8fff092005-09-03 15:55:34 -0700735#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
737#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
738#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
739#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
740#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
741#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
Kumar Gala7f7fda02005-11-10 10:34:33 -0600742#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
744#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
745#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
746#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
747#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
748#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
749#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
750#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
751#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
752#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
753#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
754#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
755#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
756#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
757#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
758#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
759#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
760#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
761#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
762#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
763#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
764#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
765#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
766#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
767#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
768#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
769#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
770#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
771#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
772#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
773#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
774#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
775
776#endif /* CONFIG_8260 */
777
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000778#endif /* Whatever way too big #ifdef */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700779
780#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
781/* pedantic: these are long because they are used with set_bit --RR */
782extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
Paul Mackerras1b923132005-10-10 22:54:57 +1000783
784/*
785 * Because many systems have two overlapping names spaces for
786 * interrupts (ISA and XICS for example), and the ISA interrupts
787 * have historically not been easy to renumber, we allow ISA
788 * interrupts to take values 0 - 15, and shift up the remaining
789 * interrupts by 0x10.
790 */
791#define NUM_ISA_INTERRUPTS 0x10
792extern int __irq_offset_value;
793
794static inline int irq_offset_up(int irq)
795{
796 return(irq + __irq_offset_value);
797}
798
799static inline int irq_offset_down(int irq)
800{
801 return(irq - __irq_offset_value);
802}
803
804static inline int irq_offset_value(void)
805{
806 return __irq_offset_value;
807}
808
809#ifdef __DO_IRQ_CANON
810extern int ppc_do_canonicalize_irqs;
811#else
812#define ppc_do_canonicalize_irqs 0
813#endif
814
815static __inline__ int irq_canonicalize(int irq)
816{
817 if (ppc_do_canonicalize_irqs && irq == 2)
818 irq = 9;
819 return irq;
820}
Benjamin Herrenschmidt0ebfff12006-07-03 21:36:01 +1000821#endif /* CONFIG_PPC_MERGE */
Paul Mackerras1b923132005-10-10 22:54:57 +1000822
823extern int distribute_irqs;
824
825struct irqaction;
826struct pt_regs;
827
Paul Mackerrasc6622f62006-02-24 10:06:59 +1100828#define __ARCH_HAS_DO_SOFTIRQ
829
830extern void __do_softirq(void);
831
Paul Mackerras1b923132005-10-10 22:54:57 +1000832#ifdef CONFIG_IRQSTACKS
833/*
834 * Per-cpu stacks for handling hard and soft interrupts.
835 */
836extern struct thread_info *hardirq_ctx[NR_CPUS];
837extern struct thread_info *softirq_ctx[NR_CPUS];
838
839extern void irq_ctx_init(void);
840extern void call_do_softirq(struct thread_info *tp);
David Howells7d12e782006-10-05 14:55:46 +0100841extern int call_handle_irq(int irq, void *p1,
Benjamin Herrenschmidtb9e5b4e2006-07-03 19:32:51 +1000842 struct thread_info *tp, void *func);
Paul Mackerras1b923132005-10-10 22:54:57 +1000843#else
844#define irq_ctx_init()
845
846#endif /* CONFIG_IRQSTACKS */
847
Paul Mackerrasf2783c12005-10-20 09:23:26 +1000848extern void do_IRQ(struct pt_regs *regs);
849
Linus Torvalds1da177e2005-04-16 15:20:36 -0700850#endif /* _ASM_IRQ_H */
851#endif /* __KERNEL__ */