Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Wdt977 0.03: A Watchdog Device for Netwinder W83977AF chip |
| 3 | * |
| 4 | * (c) Copyright 1998 Rebel.com (Woody Suwalski <woody@netwinder.org>) |
| 5 | * |
| 6 | * ----------------------- |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * as published by the Free Software Foundation; either version |
| 11 | * 2 of the License, or (at your option) any later version. |
| 12 | * |
| 13 | * ----------------------- |
| 14 | * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> |
| 15 | * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT |
| 16 | * 19-Dec-2001 Woody Suwalski: Netwinder fixes, ioctl interface |
| 17 | * 06-Jan-2002 Woody Suwalski: For compatibility, convert all timeouts |
| 18 | * from minutes to seconds. |
| 19 | * 07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in |
| 20 | * nwwatchdog_init. |
| 21 | */ |
| 22 | |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/moduleparam.h> |
| 25 | #include <linux/config.h> |
| 26 | #include <linux/types.h> |
| 27 | #include <linux/kernel.h> |
| 28 | #include <linux/fs.h> |
| 29 | #include <linux/miscdevice.h> |
| 30 | #include <linux/init.h> |
| 31 | #include <linux/watchdog.h> |
| 32 | #include <linux/notifier.h> |
| 33 | #include <linux/reboot.h> |
| 34 | |
| 35 | #include <asm/io.h> |
| 36 | #include <asm/system.h> |
| 37 | #include <asm/mach-types.h> |
| 38 | #include <asm/uaccess.h> |
| 39 | |
| 40 | #define PFX "Wdt977: " |
| 41 | #define WATCHDOG_MINOR 130 |
| 42 | |
| 43 | #define DEFAULT_TIMEOUT 60 /* default timeout in seconds */ |
| 44 | |
| 45 | static int timeout = DEFAULT_TIMEOUT; |
| 46 | static int timeoutM; /* timeout in minutes */ |
| 47 | static unsigned long timer_alive; |
| 48 | static int testmode; |
| 49 | static char expect_close; |
| 50 | |
| 51 | module_param(timeout, int, 0); |
| 52 | MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); |
| 53 | module_param(testmode, int, 0); |
| 54 | MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0"); |
| 55 | |
Andrey Panin | 4bfdf37 | 2005-07-27 11:43:58 -0700 | [diff] [blame^] | 56 | static int nowayout = WATCHDOG_NOWAYOUT; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 57 | module_param(nowayout, int, 0); |
| 58 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| 59 | |
| 60 | /* |
| 61 | * Start the watchdog |
| 62 | */ |
| 63 | |
| 64 | static int wdt977_start(void) |
| 65 | { |
| 66 | /* unlock the SuperIO chip */ |
| 67 | outb(0x87,0x370); |
| 68 | outb(0x87,0x370); |
| 69 | |
| 70 | /* select device Aux2 (device=8) and set watchdog regs F2, F3 and F4 |
| 71 | * F2 has the timeout in minutes |
| 72 | * F3 could be set to the POWER LED blink (with GP17 set to PowerLed) |
| 73 | * at timeout, and to reset timer on kbd/mouse activity (not impl.) |
| 74 | * F4 is used to just clear the TIMEOUT'ed state (bit 0) |
| 75 | */ |
| 76 | outb(0x07,0x370); |
| 77 | outb(0x08,0x371); |
| 78 | outb(0xF2,0x370); |
| 79 | outb(timeoutM,0x371); |
| 80 | outb(0xF3,0x370); |
| 81 | outb(0x00,0x371); /* another setting is 0E for kbd/mouse/LED */ |
| 82 | outb(0xF4,0x370); |
| 83 | outb(0x00,0x371); |
| 84 | |
| 85 | /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ |
| 86 | /* in test mode watch the bit 1 on F4 to indicate "triggered" */ |
| 87 | if (!testmode) |
| 88 | { |
| 89 | outb(0x07,0x370); |
| 90 | outb(0x07,0x371); |
| 91 | outb(0xE6,0x370); |
| 92 | outb(0x08,0x371); |
| 93 | } |
| 94 | |
| 95 | /* lock the SuperIO chip */ |
| 96 | outb(0xAA,0x370); |
| 97 | |
| 98 | printk(KERN_INFO PFX "activated.\n"); |
| 99 | |
| 100 | return 0; |
| 101 | } |
| 102 | |
| 103 | /* |
| 104 | * Stop the watchdog |
| 105 | */ |
| 106 | |
| 107 | static int wdt977_stop(void) |
| 108 | { |
| 109 | /* unlock the SuperIO chip */ |
| 110 | outb(0x87,0x370); |
| 111 | outb(0x87,0x370); |
| 112 | |
| 113 | /* select device Aux2 (device=8) and set watchdog regs F2,F3 and F4 |
| 114 | * F3 is reset to its default state |
| 115 | * F4 can clear the TIMEOUT'ed state (bit 0) - back to default |
| 116 | * We can not use GP17 as a PowerLed, as we use its usage as a RedLed |
| 117 | */ |
| 118 | outb(0x07,0x370); |
| 119 | outb(0x08,0x371); |
| 120 | outb(0xF2,0x370); |
| 121 | outb(0xFF,0x371); |
| 122 | outb(0xF3,0x370); |
| 123 | outb(0x00,0x371); |
| 124 | outb(0xF4,0x370); |
| 125 | outb(0x00,0x371); |
| 126 | outb(0xF2,0x370); |
| 127 | outb(0x00,0x371); |
| 128 | |
| 129 | /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ |
| 130 | outb(0x07,0x370); |
| 131 | outb(0x07,0x371); |
| 132 | outb(0xE6,0x370); |
| 133 | outb(0x08,0x371); |
| 134 | |
| 135 | /* lock the SuperIO chip */ |
| 136 | outb(0xAA,0x370); |
| 137 | |
| 138 | printk(KERN_INFO PFX "shutdown.\n"); |
| 139 | |
| 140 | return 0; |
| 141 | } |
| 142 | |
| 143 | /* |
| 144 | * Send a keepalive ping to the watchdog |
| 145 | * This is done by simply re-writing the timeout to reg. 0xF2 |
| 146 | */ |
| 147 | |
| 148 | static int wdt977_keepalive(void) |
| 149 | { |
| 150 | /* unlock the SuperIO chip */ |
| 151 | outb(0x87,0x370); |
| 152 | outb(0x87,0x370); |
| 153 | |
| 154 | /* select device Aux2 (device=8) and kicks watchdog reg F2 */ |
| 155 | /* F2 has the timeout in minutes */ |
| 156 | outb(0x07,0x370); |
| 157 | outb(0x08,0x371); |
| 158 | outb(0xF2,0x370); |
| 159 | outb(timeoutM,0x371); |
| 160 | |
| 161 | /* lock the SuperIO chip */ |
| 162 | outb(0xAA,0x370); |
| 163 | |
| 164 | return 0; |
| 165 | } |
| 166 | |
| 167 | /* |
| 168 | * Set the watchdog timeout value |
| 169 | */ |
| 170 | |
| 171 | static int wdt977_set_timeout(int t) |
| 172 | { |
| 173 | int tmrval; |
| 174 | |
| 175 | /* convert seconds to minutes, rounding up */ |
| 176 | tmrval = (t + 59) / 60; |
| 177 | |
| 178 | if (machine_is_netwinder()) { |
| 179 | /* we have a hw bug somewhere, so each 977 minute is actually only 30sec |
| 180 | * this limits the max timeout to half of device max of 255 minutes... |
| 181 | */ |
| 182 | tmrval += tmrval; |
| 183 | } |
| 184 | |
| 185 | if ((tmrval < 1) || (tmrval > 255)) |
| 186 | return -EINVAL; |
| 187 | |
| 188 | /* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */ |
| 189 | timeout = t; |
| 190 | timeoutM = tmrval; |
| 191 | return 0; |
| 192 | } |
| 193 | |
| 194 | /* |
| 195 | * Get the watchdog status |
| 196 | */ |
| 197 | |
| 198 | static int wdt977_get_status(int *status) |
| 199 | { |
| 200 | int new_status; |
| 201 | |
| 202 | *status=0; |
| 203 | |
| 204 | /* unlock the SuperIO chip */ |
| 205 | outb(0x87,0x370); |
| 206 | outb(0x87,0x370); |
| 207 | |
| 208 | /* select device Aux2 (device=8) and read watchdog reg F4 */ |
| 209 | outb(0x07,0x370); |
| 210 | outb(0x08,0x371); |
| 211 | outb(0xF4,0x370); |
| 212 | new_status = inb(0x371); |
| 213 | |
| 214 | /* lock the SuperIO chip */ |
| 215 | outb(0xAA,0x370); |
| 216 | |
| 217 | if (new_status & 1) |
| 218 | *status |= WDIOF_CARDRESET; |
| 219 | |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | |
| 224 | /* |
| 225 | * /dev/watchdog handling |
| 226 | */ |
| 227 | |
| 228 | static int wdt977_open(struct inode *inode, struct file *file) |
| 229 | { |
| 230 | /* If the watchdog is alive we don't need to start it again */ |
| 231 | if( test_and_set_bit(0,&timer_alive) ) |
| 232 | return -EBUSY; |
| 233 | |
| 234 | if (nowayout) |
| 235 | __module_get(THIS_MODULE); |
| 236 | |
| 237 | wdt977_start(); |
| 238 | return nonseekable_open(inode, file); |
| 239 | } |
| 240 | |
| 241 | static int wdt977_release(struct inode *inode, struct file *file) |
| 242 | { |
| 243 | /* |
| 244 | * Shut off the timer. |
| 245 | * Lock it in if it's a module and we set nowayout |
| 246 | */ |
| 247 | if (expect_close == 42) |
| 248 | { |
| 249 | wdt977_stop(); |
| 250 | clear_bit(0,&timer_alive); |
| 251 | } else { |
| 252 | printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); |
| 253 | wdt977_keepalive(); |
| 254 | } |
| 255 | expect_close = 0; |
| 256 | return 0; |
| 257 | } |
| 258 | |
| 259 | |
| 260 | /* |
| 261 | * wdt977_write: |
| 262 | * @file: file handle to the watchdog |
| 263 | * @buf: buffer to write (unused as data does not matter here |
| 264 | * @count: count of bytes |
| 265 | * @ppos: pointer to the position to write. No seeks allowed |
| 266 | * |
| 267 | * A write to a watchdog device is defined as a keepalive signal. Any |
| 268 | * write of data will do, as we we don't define content meaning. |
| 269 | */ |
| 270 | |
| 271 | static ssize_t wdt977_write(struct file *file, const char __user *buf, |
| 272 | size_t count, loff_t *ppos) |
| 273 | { |
| 274 | if (count) { |
| 275 | if (!nowayout) { |
| 276 | size_t i; |
| 277 | |
| 278 | /* In case it was set long ago */ |
| 279 | expect_close = 0; |
| 280 | |
| 281 | for (i = 0; i != count; i++) { |
| 282 | char c; |
| 283 | if (get_user(c, buf + i)) |
| 284 | return -EFAULT; |
| 285 | if (c == 'V') |
| 286 | expect_close = 42; |
| 287 | } |
| 288 | } |
| 289 | |
| 290 | wdt977_keepalive(); |
| 291 | } |
| 292 | return count; |
| 293 | } |
| 294 | |
| 295 | /* |
| 296 | * wdt977_ioctl: |
| 297 | * @inode: inode of the device |
| 298 | * @file: file handle to the device |
| 299 | * @cmd: watchdog command |
| 300 | * @arg: argument pointer |
| 301 | * |
| 302 | * The watchdog API defines a common set of functions for all watchdogs |
| 303 | * according to their available features. |
| 304 | */ |
| 305 | |
| 306 | static struct watchdog_info ident = { |
| 307 | .options = WDIOF_SETTIMEOUT | |
| 308 | WDIOF_MAGICCLOSE | |
| 309 | WDIOF_KEEPALIVEPING, |
| 310 | .firmware_version = 1, |
| 311 | .identity = "Winbond 83977", |
| 312 | }; |
| 313 | |
| 314 | static int wdt977_ioctl(struct inode *inode, struct file *file, |
| 315 | unsigned int cmd, unsigned long arg) |
| 316 | { |
| 317 | int status; |
| 318 | int new_options, retval = -EINVAL; |
| 319 | int new_timeout; |
| 320 | union { |
| 321 | struct watchdog_info __user *ident; |
| 322 | int __user *i; |
| 323 | } uarg; |
| 324 | |
| 325 | uarg.i = (int __user *)arg; |
| 326 | |
| 327 | switch(cmd) |
| 328 | { |
| 329 | default: |
| 330 | return -ENOIOCTLCMD; |
| 331 | |
| 332 | case WDIOC_GETSUPPORT: |
| 333 | return copy_to_user(uarg.ident, &ident, |
| 334 | sizeof(ident)) ? -EFAULT : 0; |
| 335 | |
| 336 | case WDIOC_GETSTATUS: |
| 337 | wdt977_get_status(&status); |
| 338 | return put_user(status, uarg.i); |
| 339 | |
| 340 | case WDIOC_GETBOOTSTATUS: |
| 341 | return put_user(0, uarg.i); |
| 342 | |
| 343 | case WDIOC_KEEPALIVE: |
| 344 | wdt977_keepalive(); |
| 345 | return 0; |
| 346 | |
| 347 | case WDIOC_SETOPTIONS: |
| 348 | if (get_user (new_options, uarg.i)) |
| 349 | return -EFAULT; |
| 350 | |
| 351 | if (new_options & WDIOS_DISABLECARD) { |
| 352 | wdt977_stop(); |
| 353 | retval = 0; |
| 354 | } |
| 355 | |
| 356 | if (new_options & WDIOS_ENABLECARD) { |
| 357 | wdt977_start(); |
| 358 | retval = 0; |
| 359 | } |
| 360 | |
| 361 | return retval; |
| 362 | |
| 363 | case WDIOC_SETTIMEOUT: |
| 364 | if (get_user(new_timeout, uarg.i)) |
| 365 | return -EFAULT; |
| 366 | |
| 367 | if (wdt977_set_timeout(new_timeout)) |
| 368 | return -EINVAL; |
| 369 | |
| 370 | wdt977_keepalive(); |
| 371 | /* Fall */ |
| 372 | |
| 373 | case WDIOC_GETTIMEOUT: |
| 374 | return put_user(timeout, uarg.i); |
| 375 | |
| 376 | } |
| 377 | } |
| 378 | |
| 379 | static int wdt977_notify_sys(struct notifier_block *this, unsigned long code, |
| 380 | void *unused) |
| 381 | { |
| 382 | if(code==SYS_DOWN || code==SYS_HALT) |
| 383 | wdt977_stop(); |
| 384 | return NOTIFY_DONE; |
| 385 | } |
| 386 | |
| 387 | static struct file_operations wdt977_fops= |
| 388 | { |
| 389 | .owner = THIS_MODULE, |
| 390 | .llseek = no_llseek, |
| 391 | .write = wdt977_write, |
| 392 | .ioctl = wdt977_ioctl, |
| 393 | .open = wdt977_open, |
| 394 | .release = wdt977_release, |
| 395 | }; |
| 396 | |
| 397 | static struct miscdevice wdt977_miscdev= |
| 398 | { |
| 399 | .minor = WATCHDOG_MINOR, |
| 400 | .name = "watchdog", |
| 401 | .fops = &wdt977_fops, |
| 402 | }; |
| 403 | |
| 404 | static struct notifier_block wdt977_notifier = { |
| 405 | .notifier_call = wdt977_notify_sys, |
| 406 | }; |
| 407 | |
| 408 | static int __init nwwatchdog_init(void) |
| 409 | { |
| 410 | int retval; |
| 411 | if (!machine_is_netwinder()) |
| 412 | return -ENODEV; |
| 413 | |
| 414 | /* Check that the timeout value is within it's range ; if not reset to the default */ |
| 415 | if (wdt977_set_timeout(timeout)) { |
| 416 | wdt977_set_timeout(DEFAULT_TIMEOUT); |
| 417 | printk(KERN_INFO PFX "timeout value must be 60<timeout<15300, using %d\n", |
| 418 | DEFAULT_TIMEOUT); |
| 419 | } |
| 420 | |
| 421 | retval = register_reboot_notifier(&wdt977_notifier); |
| 422 | if (retval) { |
| 423 | printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", |
| 424 | retval); |
| 425 | return retval; |
| 426 | } |
| 427 | |
| 428 | retval = misc_register(&wdt977_miscdev); |
| 429 | if (retval) { |
| 430 | printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| 431 | WATCHDOG_MINOR, retval); |
| 432 | unregister_reboot_notifier(&wdt977_notifier); |
| 433 | return retval; |
| 434 | } |
| 435 | |
| 436 | printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d, testmode = %i)\n", |
| 437 | timeout, nowayout, testmode); |
| 438 | |
| 439 | return 0; |
| 440 | } |
| 441 | |
| 442 | static void __exit nwwatchdog_exit(void) |
| 443 | { |
| 444 | misc_deregister(&wdt977_miscdev); |
| 445 | unregister_reboot_notifier(&wdt977_notifier); |
| 446 | } |
| 447 | |
| 448 | module_init(nwwatchdog_init); |
| 449 | module_exit(nwwatchdog_exit); |
| 450 | |
| 451 | MODULE_AUTHOR("Woody Suwalski <woody@netwinder.org>"); |
| 452 | MODULE_DESCRIPTION("W83977AF Watchdog driver"); |
| 453 | MODULE_LICENSE("GPL"); |
| 454 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |