blob: 49444203328ad8546b4299fb702d0155897bc0d0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -08002 * pxa2xx_ssp.h
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This driver supports the following PXA CPU/SSP ports:-
11 *
12 * PXA250 SSP
13 * PXA255 SSP, NSSP
14 * PXA26x SSP, NSSP, ASSP
15 * PXA27x SSP1, SSP2, SSP3
eric miao88286452007-12-06 17:56:42 +080016 * PXA3xx SSP1, SSP2, SSP3, SSP4
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 */
18
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -080019#ifndef __LINUX_SSP_H
20#define __LINUX_SSP_H
eric miao88286452007-12-06 17:56:42 +080021
22#include <linux/list.h>
Mark Brown63bef542008-08-26 18:40:57 +010023#include <linux/io.h>
Daniel Mack64462212013-08-12 10:37:18 +020024#include <linux/of.h>
25
eric miao88286452007-12-06 17:56:42 +080026
Eric Miao83f28892010-03-16 17:03:20 +080027/*
28 * SSP Serial Port Registers
29 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
30 * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
31 */
32
33#define SSCR0 (0x00) /* SSP Control Register 0 */
34#define SSCR1 (0x04) /* SSP Control Register 1 */
35#define SSSR (0x08) /* SSP Status Register */
36#define SSITR (0x0C) /* SSP Interrupt Test Register */
37#define SSDR (0x10) /* SSP Data Write/Data Read Register */
38
39#define SSTO (0x28) /* SSP Time Out Register */
40#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
41#define SSTSA (0x30) /* SSP Tx Timeslot Active */
42#define SSRSA (0x34) /* SSP Rx Timeslot Active */
43#define SSTSS (0x38) /* SSP Timeslot Status */
44#define SSACD (0x3C) /* SSP Audio Clock Divider */
Eric Miao83f28892010-03-16 17:03:20 +080045#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
Eric Miao83f28892010-03-16 17:03:20 +080046
47/* Common PXA2xx bits first */
48#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
49#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
50#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
51#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
52#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
53#define SSCR0_National (0x2 << 4) /* National Microwire */
54#define SSCR0_ECS (1 << 6) /* External clock select */
55#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
56#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */
57
Haojian Zhuang004690f2010-03-19 11:52:39 -040058/* PXA27x, PXA3xx */
Eric Miao83f28892010-03-16 17:03:20 +080059#define SSCR0_EDSS (1 << 20) /* Extended data size select */
60#define SSCR0_NCS (1 << 21) /* Network clock select */
61#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
62#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
63#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
64#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
Haojian Zhuang004690f2010-03-19 11:52:39 -040065#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
Eric Miao83f28892010-03-16 17:03:20 +080066#define SSCR0_ACS (1 << 30) /* Audio clock select */
67#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
Eric Miao83f28892010-03-16 17:03:20 +080068
Eric Miao83f28892010-03-16 17:03:20 +080069
70#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
71#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
72#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
73#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
74#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
75#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
Eric Miao83f28892010-03-16 17:03:20 +080076
Sebastian Andrzej Siewior2a8626a2010-11-22 17:12:17 -080077#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
Eric Miao83f28892010-03-16 17:03:20 +080078#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
79#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
80#define SSSR_BSY (1 << 4) /* SSP Busy */
81#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
82#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
83#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
Sebastian Andrzej Siewiord0777f22010-11-22 17:12:16 -080084
85#ifdef CONFIG_ARCH_PXA
86#define RX_THRESH_DFLT 8
87#define TX_THRESH_DFLT 8
88
89#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
90#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
91
92#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
93#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
94#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
95#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
96
97#else
98
99#define RX_THRESH_DFLT 2
100#define TX_THRESH_DFLT 2
101
102#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
103#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
104
105#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
106#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
107#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
108#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
109#endif
Eric Miao83f28892010-03-16 17:03:20 +0800110
111/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
112#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
113#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
114#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
115#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
116#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
117#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
118#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
119#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
120#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
121#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
122#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
123#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
124#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
125#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
126#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300127#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
Eric Miao83f28892010-03-16 17:03:20 +0800128#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
129#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
130#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
131
132#define SSSR_BCE (1 << 23) /* Bit Count Error */
133#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
134#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
135#define SSSR_EOC (1 << 20) /* End Of Chain */
136#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
137#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
138
Eric Miao83f28892010-03-16 17:03:20 +0800139
Eric Miao83f28892010-03-16 17:03:20 +0800140#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
Haojian Zhuang004690f2010-03-19 11:52:39 -0400141#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
142#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
143#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
144#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
145#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
146#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
147#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
148#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
149
150/* PXA3xx */
151#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
152#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
153#define SSPSP_TIMING_MASK (0x7f8001f0)
Eric Miao83f28892010-03-16 17:03:20 +0800154
155#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
156#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
157#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
Eric Miao83f28892010-03-16 17:03:20 +0800158#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
Eric Miao83f28892010-03-16 17:03:20 +0800159
Mika Westerberga0d26422013-01-22 12:26:32 +0200160/* LPSS SSP */
161#define SSITF 0x44 /* TX FIFO trigger level */
162#define SSITF_TxLoThresh(x) (((x) - 1) << 8)
163#define SSITF_TxHiThresh(x) ((x) - 1)
164
165#define SSIRF 0x48 /* RX FIFO trigger level */
166#define SSIRF_RxThresh(x) ((x) - 1)
167
eric miao88286452007-12-06 17:56:42 +0800168enum pxa_ssp_type {
169 SSP_UNDEFINED = 0,
170 PXA25x_SSP, /* pxa 210, 250, 255, 26x */
171 PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
172 PXA27x_SSP,
Qiao Zhou972a55b2012-06-04 10:41:04 +0800173 PXA3xx_SSP,
Haojian Zhuang7e499222010-03-19 11:53:17 -0400174 PXA168_SSP,
Qiao Zhou60172212012-06-04 10:41:03 +0800175 PXA910_SSP,
Sebastian Andrzej Siewior2a8626a2010-11-22 17:12:17 -0800176 CE4100_SSP,
Mika Westerberga0d26422013-01-22 12:26:32 +0200177 LPSS_SSP,
eric miao88286452007-12-06 17:56:42 +0800178};
179
180struct ssp_device {
181 struct platform_device *pdev;
182 struct list_head node;
183
184 struct clk *clk;
185 void __iomem *mmio_base;
186 unsigned long phys_base;
187
188 const char *label;
189 int port_id;
190 int type;
191 int use_count;
192 int irq;
193 int drcmr_rx;
194 int drcmr_tx;
Daniel Mack64462212013-08-12 10:37:18 +0200195
196 struct device_node *of_node;
eric miao88286452007-12-06 17:56:42 +0800197};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700198
Mark Brown63bef542008-08-26 18:40:57 +0100199/**
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400200 * pxa_ssp_write_reg - Write to a SSP register
Mark Brown63bef542008-08-26 18:40:57 +0100201 *
202 * @dev: SSP device to access
203 * @reg: Register to write to
204 * @val: Value to be written.
205 */
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400206static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
Mark Brown63bef542008-08-26 18:40:57 +0100207{
208 __raw_writel(val, dev->mmio_base + reg);
209}
210
211/**
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400212 * pxa_ssp_read_reg - Read from a SSP register
Mark Brown63bef542008-08-26 18:40:57 +0100213 *
214 * @dev: SSP device to access
215 * @reg: Register to read from
216 */
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400217static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
Mark Brown63bef542008-08-26 18:40:57 +0100218{
219 return __raw_readl(dev->mmio_base + reg);
220}
221
Mika Westerberg851bacf2013-01-07 12:44:33 +0200222#ifdef CONFIG_ARCH_PXA
Haojian Zhuangbaffe162010-05-05 10:11:15 -0400223struct ssp_device *pxa_ssp_request(int port, const char *label);
224void pxa_ssp_free(struct ssp_device *);
Daniel Mack64462212013-08-12 10:37:18 +0200225struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
226 const char *label);
Mika Westerberg851bacf2013-01-07 12:44:33 +0200227#else
228static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
229{
230 return NULL;
231}
Daniel Mack64462212013-08-12 10:37:18 +0200232static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n,
233 const char *name)
234{
235 return NULL;
236}
Mika Westerberg851bacf2013-01-07 12:44:33 +0200237static inline void pxa_ssp_free(struct ssp_device *ssp) {}
238#endif
239
Sebastian Andrzej Siewior8348c252010-11-22 17:12:15 -0800240#endif