blob: c6eda18b15efbb0ceec0b2a25e8f6e06ada488cc [file] [log] [blame]
Antonio Ospite5054d392009-06-19 13:55:42 +02001Kernel driver lp3944
2====================
3
4 * National Semiconductor LP3944 Fun-light Chip
5 Prefix: 'lp3944'
6 Addresses scanned: None (see the Notes section below)
7 Datasheet: Publicly available at the National Semiconductor website
8 http://www.national.com/pf/LP/LP3944.html
9
10Authors:
11 Antonio Ospite <ospite@studenti.unina.it>
12
13
14Description
15-----------
16The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
17DIM modes; it could even be used as a gpio expander but this driver assumes it
18is used as a led controller.
19
20The DIM modes are used to set _blink_ patterns for leds, the pattern is
21specified supplying two parameters:
22 - period: from 0s to 1.6s
23 - duty cycle: percentage of the period the led is on, from 0 to 100
24
25Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
26See the datasheet for details.
27
28LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
29leds, the camera flash light and the lcds power.
30
31
32Notes
33-----
34The chip is used mainly in embedded contexts, so this driver expects it is
35registered using the i2c_board_info mechanism.
36
37To register the chip at address 0x60 on adapter 0, set the platform data
38according to include/linux/leds-lp3944.h, set the i2c board info:
39
40 static struct i2c_board_info __initdata a910_i2c_board_info[] = {
41 {
42 I2C_BOARD_INFO("lp3944", 0x60),
43 .platform_data = &a910_lp3944_leds,
44 },
45 };
46
47and register it in the platform init function
48
49 i2c_register_board_info(0, a910_i2c_board_info,
50 ARRAY_SIZE(a910_i2c_board_info));