blob: 3abeeddc67d3533a2c187acc5d606390310902b7 [file] [log] [blame]
Cliff Cai579e8ea2008-09-05 18:21:42 +08001config SND_BF5XX_I2S
2 tristate "SoC I2S Audio for the ADI BF5xx chip"
Takashi Iwai2caf6a12008-12-01 17:56:06 +01003 depends on BLACKFIN
Cliff Cai579e8ea2008-09-05 18:21:42 +08004 help
5 Say Y or M if you want to add support for codecs attached to
6 the Blackfin SPORT (synchronous serial ports) interface in I2S
7 mode (supports single stereo In/Out).
8 You will also need to select the audio interfaces to support below.
9
10config SND_BF5XX_SOC_SSM2602
11 tristate "SoC SSM2602 Audio support for BF52x ezkit"
12 depends on SND_BF5XX_I2S
13 select SND_BF5XX_SOC_I2S
14 select SND_SOC_SSM2602
15 select I2C
Cliff Cai579e8ea2008-09-05 18:21:42 +080016 help
17 Say Y if you want to add support for SoC audio on BF527-EZKIT.
18
Cliff Cai5564b142008-09-27 22:31:21 +080019config SND_BF5XX_SOC_AD73311
20 tristate "SoC AD73311 Audio support for Blackfin"
21 depends on SND_BF5XX_I2S
22 select SND_BF5XX_SOC_I2S
23 select SND_SOC_AD73311
24 help
25 Say Y if you want to add support for AD73311 codec on Blackfin.
26
27config SND_BFIN_AD73311_SE
28 int "PF pin for AD73311L Chip Select"
29 depends on SND_BF5XX_SOC_AD73311
30 default 4
31 help
32 Enter the GPIO used to control AD73311's SE pin. Acceptable
33 values are 0 to 7
34
Barry Songdf1246d2009-10-01 01:33:30 -040035config SND_BF5XX_TDM
36 tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
37 depends on (BLACKFIN && SND_SOC)
38 help
39 Say Y or M if you want to add support for codecs attached to
40 the Blackfin SPORT (synchronous serial ports) interface in TDM
41 mode.
42 You will also need to select the audio interfaces to support below.
43
44config SND_BF5XX_SOC_AD1836
45 tristate "SoC AD1836 Audio support for BF5xx"
46 depends on SND_BF5XX_TDM
47 select SND_BF5XX_SOC_TDM
48 select SND_SOC_AD1836
49 help
50 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
51
Barry Song698c3752010-03-19 11:18:40 +080052config SND_BF5XX_SOC_AD193X
53 tristate "SoC AD193X Audio support for Blackfin"
Barry Songdf1246d2009-10-01 01:33:30 -040054 depends on SND_BF5XX_TDM
55 select SND_BF5XX_SOC_TDM
Barry Song698c3752010-03-19 11:18:40 +080056 select SND_SOC_AD193X
Barry Songdf1246d2009-10-01 01:33:30 -040057 help
Barry Song698c3752010-03-19 11:18:40 +080058 Say Y if you want to add support for AD193X codec on Blackfin.
59 This driver supports AD1936, AD1937, AD1938 and AD1939.
Barry Songdf1246d2009-10-01 01:33:30 -040060
Cliff Cai579e8ea2008-09-05 18:21:42 +080061config SND_BF5XX_AC97
62 tristate "SoC AC97 Audio for the ADI BF5xx chip"
Takashi Iwai2caf6a12008-12-01 17:56:06 +010063 depends on BLACKFIN
Cliff Cai579e8ea2008-09-05 18:21:42 +080064 help
65 Say Y or M if you want to add support for codecs attached to
66 the Blackfin SPORT (synchronous serial ports) interface in slot 16
67 mode (pseudo AC97 interface).
68 You will also need to select the audio interfaces to support below.
69
70 Note:
Matt LaPlante692105b2009-01-26 11:12:25 +010071 AC97 codecs which do not implement the slot-16 mode will not function
Cliff Cai579e8ea2008-09-05 18:21:42 +080072 properly with this driver. This driver is known to work with the
73 Analog Devices line of AC97 codecs.
74
Cliff Cai67f854b2008-11-18 16:18:17 +080075config SND_BF5XX_MMAP_SUPPORT
Cliff Cai579e8ea2008-09-05 18:21:42 +080076 bool "Enable MMAP Support"
77 depends on SND_BF5XX_AC97
78 default y
79 help
80 Say y if you want AC97 driver to support mmap mode.
81 We introduce an intermediate buffer to simulate mmap.
82
Cliff Cai67f854b2008-11-18 16:18:17 +080083config SND_BF5XX_MULTICHAN_SUPPORT
84 bool "Enable Multichannel Support"
85 depends on SND_BF5XX_AC97
86 default n
87 help
88 Say y if you want AC97 driver to support up to 5.1 channel audio.
89 this mode will consume much more memory for DMA.
90
Barry Songdf1246d2009-10-01 01:33:30 -040091config SND_BF5XX_HAVE_COLD_RESET
92 bool "BOARD has COLD Reset GPIO"
93 depends on SND_BF5XX_AC97
94 default y if BFIN548_EZKIT
95 default n if !BFIN548_EZKIT
96
97config SND_BF5XX_RESET_GPIO_NUM
98 int "Set a GPIO for cold reset"
99 depends on SND_BF5XX_HAVE_COLD_RESET
100 range 0 159
101 default 19 if BFIN548_EZKIT
102 default 5 if BFIN537_STAMP
103 default 0
104 help
105 Set the correct GPIO for RESET the sound chip.
106
107config SND_BF5XX_SOC_AD1980
Sonic Zhang2e2211a2010-08-07 12:06:07 -0400108 tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
Barry Songdf1246d2009-10-01 01:33:30 -0400109 depends on SND_BF5XX_AC97
110 select SND_BF5XX_SOC_AC97
111 select SND_SOC_AD1980
112 help
113 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
114
Sonic Zhang2e2211a2010-08-07 12:06:07 -0400115 Warning:
116 Because Analog Devices Inc. discontinued the ad1980 sound chip since
117 Sep. 2009, this ad1980 driver is not maintained, tested and supported
118 by ADI now.
119
Cliff Cai579e8ea2008-09-05 18:21:42 +0800120config SND_BF5XX_SOC_SPORT
121 tristate
Cliff Cai67f854b2008-11-18 16:18:17 +0800122
Cliff Cai579e8ea2008-09-05 18:21:42 +0800123config SND_BF5XX_SOC_I2S
124 tristate
125 select SND_BF5XX_SOC_SPORT
126
Barry Song01e2ab22009-07-27 18:06:39 +0800127config SND_BF5XX_SOC_TDM
128 tristate
129 select SND_BF5XX_SOC_SPORT
130
Cliff Cai579e8ea2008-09-05 18:21:42 +0800131config SND_BF5XX_SOC_AC97
132 tristate
133 select AC97_BUS
134 select SND_SOC_AC97_BUS
135 select SND_BF5XX_SOC_SPORT
136
Cliff Cai579e8ea2008-09-05 18:21:42 +0800137config SND_BF5XX_SPORT_NUM
138 int "Set a SPORT for Sound chip"
Barry Song01e2ab22009-07-27 18:06:39 +0800139 depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
Cliff Cai579e8ea2008-09-05 18:21:42 +0800140 range 0 3 if BF54x
Mike Frysingera11311d2008-11-18 16:18:15 +0800141 range 0 1 if !BF54x
Cliff Cai579e8ea2008-09-05 18:21:42 +0800142 default 0
143 help
144 Set the correct SPORT for sound chip.