blob: 3b45a0d27b80e1a6559c4b9cbdf2be3aaec2b14c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef __LINUX_USB_H
2#define __LINUX_USB_H
3
4#include <linux/mod_devicetable.h>
David Brownell5f848132006-12-16 15:34:53 -08005#include <linux/usb/ch9.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -07006
7#define USB_MAJOR 180
Kay Sieversfbf82fd2005-07-31 01:05:53 +02008#define USB_DEVICE_MAJOR 189
Linus Torvalds1da177e2005-04-16 15:20:36 -07009
10
11#ifdef __KERNEL__
12
Linus Torvalds1da177e2005-04-16 15:20:36 -070013#include <linux/errno.h> /* for -ENODEV */
14#include <linux/delay.h> /* for mdelay() */
15#include <linux/interrupt.h> /* for in_interrupt() */
16#include <linux/list.h> /* for struct list_head */
17#include <linux/kref.h> /* for struct kref */
18#include <linux/device.h> /* for struct device */
19#include <linux/fs.h> /* for struct file_operations */
20#include <linux/completion.h> /* for struct completion */
21#include <linux/sched.h> /* for current && schedule_timeout */
Alan Stern645daaa2006-08-30 15:47:02 -040022#include <linux/mutex.h> /* for struct mutex */
Linus Torvalds1da177e2005-04-16 15:20:36 -070023
24struct usb_device;
25struct usb_driver;
Inaky Perez-Gonzalezb1d8dfb2008-04-08 13:24:46 -070026struct wusb_dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -070027
28/*-------------------------------------------------------------------------*/
29
30/*
31 * Host-side wrappers for standard USB descriptors ... these are parsed
32 * from the data provided by devices. Parsing turns them from a flat
33 * sequence of descriptors into a hierarchy:
34 *
35 * - devices have one (usually) or more configs;
36 * - configs have one (often) or more interfaces;
37 * - interfaces have one (usually) or more settings;
38 * - each interface setting has zero or (usually) more endpoints.
Sarah Sharp663c30d2009-04-27 19:58:14 -070039 * - a SuperSpeed endpoint has a companion descriptor
Linus Torvalds1da177e2005-04-16 15:20:36 -070040 *
41 * And there might be other descriptors mixed in with those.
42 *
43 * Devices may also have class-specific or vendor-specific descriptors.
44 */
45
Greg Kroah-Hartman9bde7492006-06-14 12:14:34 -070046struct ep_device;
47
Sarah Sharp663c30d2009-04-27 19:58:14 -070048/* For SS devices */
49/**
Sarah Sharpf0058c62009-04-29 19:06:20 -070050 * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
Sarah Sharp663c30d2009-04-27 19:58:14 -070051 * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
52 * @extra: descriptors following this endpoint companion descriptor
53 * @extralen: how many bytes of "extra" are valid
54 */
Sarah Sharpf0058c62009-04-29 19:06:20 -070055struct usb_host_ss_ep_comp {
56 struct usb_ss_ep_comp_descriptor desc;
57 unsigned char *extra; /* Extra descriptors */
58 int extralen;
Sarah Sharp663c30d2009-04-27 19:58:14 -070059};
60
Linus Torvalds1da177e2005-04-16 15:20:36 -070061/**
62 * struct usb_host_endpoint - host-side endpoint descriptor and queue
63 * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
64 * @urb_list: urbs queued to this endpoint; maintained by usbcore
65 * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
66 * with one or more transfer descriptors (TDs) per urb
Randy Dunlap7fac9a32006-06-22 15:12:41 -070067 * @ep_dev: ep_device for sysfs info
Sarah Sharpf0058c62009-04-29 19:06:20 -070068 * @ss_ep_comp: companion descriptor information for this endpoint
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 * @extra: descriptors following this endpoint in the configuration
70 * @extralen: how many bytes of "extra" are valid
Alan Sternbdd016b2007-07-30 17:05:22 -040071 * @enabled: URBs may be submitted to this endpoint
Linus Torvalds1da177e2005-04-16 15:20:36 -070072 *
73 * USB requests are always queued to a given endpoint, identified by a
74 * descriptor within an active interface in a given USB configuration.
75 */
76struct usb_host_endpoint {
77 struct usb_endpoint_descriptor desc;
78 struct list_head urb_list;
79 void *hcpriv;
Greg Kroah-Hartman9bde7492006-06-14 12:14:34 -070080 struct ep_device *ep_dev; /* For sysfs info */
Sarah Sharpf0058c62009-04-29 19:06:20 -070081 struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */
Linus Torvalds1da177e2005-04-16 15:20:36 -070082
83 unsigned char *extra; /* Extra descriptors */
84 int extralen;
Alan Sternbdd016b2007-07-30 17:05:22 -040085 int enabled;
Linus Torvalds1da177e2005-04-16 15:20:36 -070086};
87
88/* host-side wrapper for one interface setting's parsed descriptors */
89struct usb_host_interface {
90 struct usb_interface_descriptor desc;
91
92 /* array of desc.bNumEndpoint endpoints associated with this
93 * interface setting. these will be in no particular order.
94 */
95 struct usb_host_endpoint *endpoint;
96
97 char *string; /* iInterface string, if present */
98 unsigned char *extra; /* Extra descriptors */
99 int extralen;
100};
101
102enum usb_interface_condition {
103 USB_INTERFACE_UNBOUND = 0,
104 USB_INTERFACE_BINDING,
105 USB_INTERFACE_BOUND,
106 USB_INTERFACE_UNBINDING,
107};
108
109/**
110 * struct usb_interface - what usb device drivers talk to
111 * @altsetting: array of interface structures, one for each alternate
112 * setting that may be selected. Each one includes a set of
113 * endpoint configurations. They will be in no particular order.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114 * @cur_altsetting: the current altsetting.
Lei Mingd6d914f2008-02-25 18:07:28 +0800115 * @num_altsetting: number of altsettings defined.
Randy Dunlap3f423782007-07-19 10:21:37 -0700116 * @intf_assoc: interface association descriptor
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117 * @minor: the minor number assigned to this interface, if this
118 * interface is bound to a driver that uses the USB major number.
119 * If this interface does not use the USB major, this field should
120 * be unused. The driver should set this value in the probe()
121 * function of the driver, after it has been assigned a minor
122 * number from the USB core by calling usb_register_dev().
123 * @condition: binding state of the interface: not bound, binding
124 * (in probe()), bound to a driver, or unbinding (in disconnect())
Alan Stern4d064c02006-07-01 22:11:44 -0400125 * @is_active: flag set when the interface is bound and not suspended.
Randy Dunlapf88ed902007-12-03 14:14:16 -0800126 * @sysfs_files_created: sysfs attributes exist
Alan Stern3b23dd62008-12-05 14:10:34 -0500127 * @ep_devs_created: endpoint child pseudo-devices exist
Alan Stern352d0262008-10-29 15:16:58 -0400128 * @unregistering: flag set when the interface is being unregistered
Alan Stern645daaa2006-08-30 15:47:02 -0400129 * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
130 * capability during autosuspend.
Alan Stern55151d72008-08-12 14:33:59 -0400131 * @needs_altsetting0: flag set when a set-interface request for altsetting 0
132 * has been deferred.
Alan Sternf4f4d582008-07-28 10:39:28 -0400133 * @needs_binding: flag set when the driver should be re-probed or unbound
134 * following a reset or suspend operation it doesn't support.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 * @dev: driver model's view of this device
Greg Kroah-Hartman0873c762006-06-20 13:09:50 -0700136 * @usb_dev: if an interface is bound to the USB major, this will point
137 * to the sysfs representation for that device.
Alan Stern645daaa2006-08-30 15:47:02 -0400138 * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
139 * allowed unless the counter is 0.
Inaky Perez-Gonzalezdc023dc2008-11-13 10:31:35 -0800140 * @reset_ws: Used for scheduling resets from atomic context.
141 * @reset_running: set to 1 if the interface is currently running a
142 * queued reset so that usb_cancel_queued_reset() doesn't try to
143 * remove from the workqueue when running inside the worker
144 * thread. See __usb_queue_reset_device().
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145 *
146 * USB device drivers attach to interfaces on a physical device. Each
147 * interface encapsulates a single high level function, such as feeding
148 * an audio stream to a speaker or reporting a change in a volume control.
149 * Many USB devices only have one interface. The protocol used to talk to
150 * an interface's endpoints can be defined in a usb "class" specification,
151 * or by a product's vendor. The (default) control endpoint is part of
152 * every interface, but is never listed among the interface's descriptors.
153 *
154 * The driver that is bound to the interface can use standard driver model
155 * calls such as dev_get_drvdata() on the dev member of this structure.
156 *
157 * Each interface may have alternate settings. The initial configuration
158 * of a device sets altsetting 0, but the device driver can change
159 * that setting using usb_set_interface(). Alternate settings are often
Michael Opdenacker59c51592007-05-09 08:57:56 +0200160 * used to control the use of periodic endpoints, such as by having
Linus Torvalds1da177e2005-04-16 15:20:36 -0700161 * different endpoints use different amounts of reserved USB bandwidth.
162 * All standards-conformant USB devices that use isochronous endpoints
163 * will use them in non-default settings.
164 *
165 * The USB specification says that alternate setting numbers must run from
166 * 0 to one less than the total number of alternate settings. But some
167 * devices manage to mess this up, and the structures aren't necessarily
168 * stored in numerical order anyhow. Use usb_altnum_to_altsetting() to
169 * look up an alternate setting in the altsetting array based on its number.
170 */
171struct usb_interface {
172 /* array of alternate settings for this interface,
173 * stored in no particular order */
174 struct usb_host_interface *altsetting;
175
176 struct usb_host_interface *cur_altsetting; /* the currently
177 * active alternate setting */
178 unsigned num_altsetting; /* number of alternate settings */
179
Craig W. Nadler165fe972007-06-15 23:14:35 -0400180 /* If there is an interface association descriptor then it will list
181 * the associated interfaces */
182 struct usb_interface_assoc_descriptor *intf_assoc;
183
Alan Sternb724ae72005-10-24 15:36:00 -0400184 int minor; /* minor number this interface is
185 * bound to */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186 enum usb_interface_condition condition; /* state of binding */
Alan Stern4d064c02006-07-01 22:11:44 -0400187 unsigned is_active:1; /* the interface is not suspended */
Alan Stern7e615592007-11-06 11:43:42 -0500188 unsigned sysfs_files_created:1; /* the sysfs attributes exist */
Alan Stern3b23dd62008-12-05 14:10:34 -0500189 unsigned ep_devs_created:1; /* endpoint "devices" exist */
Alan Stern352d0262008-10-29 15:16:58 -0400190 unsigned unregistering:1; /* unregistration is in progress */
Alan Stern645daaa2006-08-30 15:47:02 -0400191 unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
Alan Stern55151d72008-08-12 14:33:59 -0400192 unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
Alan Stern78d9a482008-06-23 16:00:40 -0400193 unsigned needs_binding:1; /* needs delayed unbind/rebind */
Inaky Perez-Gonzalezdc023dc2008-11-13 10:31:35 -0800194 unsigned reset_running:1;
Alan Stern4d064c02006-07-01 22:11:44 -0400195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196 struct device dev; /* interface specific device info */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800197 struct device *usb_dev;
Alan Stern645daaa2006-08-30 15:47:02 -0400198 int pm_usage_cnt; /* usage counter for autosuspend */
Inaky Perez-Gonzalezdc023dc2008-11-13 10:31:35 -0800199 struct work_struct reset_ws; /* for resets in atomic context */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200};
201#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
202#define interface_to_usbdev(intf) \
203 container_of(intf->dev.parent, struct usb_device, dev)
204
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800205static inline void *usb_get_intfdata(struct usb_interface *intf)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206{
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800207 return dev_get_drvdata(&intf->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208}
209
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800210static inline void usb_set_intfdata(struct usb_interface *intf, void *data)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211{
212 dev_set_drvdata(&intf->dev, data);
213}
214
215struct usb_interface *usb_get_intf(struct usb_interface *intf);
216void usb_put_intf(struct usb_interface *intf);
217
218/* this maximum is arbitrary */
219#define USB_MAXINTERFACES 32
Craig W. Nadler165fe972007-06-15 23:14:35 -0400220#define USB_MAXIADS USB_MAXINTERFACES/2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221
222/**
223 * struct usb_interface_cache - long-term representation of a device interface
224 * @num_altsetting: number of altsettings defined.
225 * @ref: reference counter.
226 * @altsetting: variable-length array of interface structures, one for
227 * each alternate setting that may be selected. Each one includes a
228 * set of endpoint configurations. They will be in no particular order.
229 *
230 * These structures persist for the lifetime of a usb_device, unlike
231 * struct usb_interface (which persists only as long as its configuration
232 * is installed). The altsetting arrays can be accessed through these
233 * structures at any time, permitting comparison of configurations and
234 * providing support for the /proc/bus/usb/devices pseudo-file.
235 */
236struct usb_interface_cache {
237 unsigned num_altsetting; /* number of alternate settings */
238 struct kref ref; /* reference counter */
239
240 /* variable-length array of alternate settings for this interface,
241 * stored in no particular order */
242 struct usb_host_interface altsetting[0];
243};
244#define ref_to_usb_interface_cache(r) \
245 container_of(r, struct usb_interface_cache, ref)
246#define altsetting_to_usb_interface_cache(a) \
247 container_of(a, struct usb_interface_cache, altsetting[0])
248
249/**
250 * struct usb_host_config - representation of a device's configuration
251 * @desc: the device's configuration descriptor.
252 * @string: pointer to the cached version of the iConfiguration string, if
253 * present for this configuration.
Randy Dunlap3f423782007-07-19 10:21:37 -0700254 * @intf_assoc: list of any interface association descriptors in this config
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 * @interface: array of pointers to usb_interface structures, one for each
256 * interface in the configuration. The number of interfaces is stored
257 * in desc.bNumInterfaces. These pointers are valid only while the
258 * the configuration is active.
259 * @intf_cache: array of pointers to usb_interface_cache structures, one
260 * for each interface in the configuration. These structures exist
261 * for the entire life of the device.
262 * @extra: pointer to buffer containing all extra descriptors associated
263 * with this configuration (those preceding the first interface
264 * descriptor).
265 * @extralen: length of the extra descriptors buffer.
266 *
267 * USB devices may have multiple configurations, but only one can be active
268 * at any time. Each encapsulates a different operational environment;
269 * for example, a dual-speed device would have separate configurations for
270 * full-speed and high-speed operation. The number of configurations
271 * available is stored in the device descriptor as bNumConfigurations.
272 *
273 * A configuration can contain multiple interfaces. Each corresponds to
274 * a different function of the USB device, and all are available whenever
275 * the configuration is active. The USB standard says that interfaces
276 * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot
277 * of devices get this wrong. In addition, the interface array is not
278 * guaranteed to be sorted in numerical order. Use usb_ifnum_to_if() to
279 * look up an interface entry based on its number.
280 *
281 * Device drivers should not attempt to activate configurations. The choice
282 * of which configuration to install is a policy decision based on such
283 * considerations as available power, functionality provided, and the user's
Kay Sievers312c0042005-11-16 09:00:00 +0100284 * desires (expressed through userspace tools). However, drivers can call
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285 * usb_reset_configuration() to reinitialize the current configuration and
286 * all its interfaces.
287 */
288struct usb_host_config {
289 struct usb_config_descriptor desc;
290
Alan Stern4f62efe2005-10-24 16:24:14 -0400291 char *string; /* iConfiguration string, if present */
Craig W. Nadler165fe972007-06-15 23:14:35 -0400292
293 /* List of any Interface Association Descriptors in this
294 * configuration. */
295 struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS];
296
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 /* the interfaces associated with this configuration,
298 * stored in no particular order */
299 struct usb_interface *interface[USB_MAXINTERFACES];
300
301 /* Interface information available even when this is not the
302 * active configuration */
303 struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
304
305 unsigned char *extra; /* Extra descriptors */
306 int extralen;
307};
308
309int __usb_get_extra_descriptor(char *buffer, unsigned size,
310 unsigned char type, void **ptr);
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800311#define usb_get_extra_descriptor(ifpoint, type, ptr) \
312 __usb_get_extra_descriptor((ifpoint)->extra, \
313 (ifpoint)->extralen, \
314 type, (void **)ptr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315
Alan Sternb724ae72005-10-24 15:36:00 -0400316/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318/* USB device number allocation bitmap */
319struct usb_devmap {
320 unsigned long devicemap[128 / (8*sizeof(unsigned long))];
321};
322
323/*
324 * Allocated per bus (tree of devices) we have:
325 */
326struct usb_bus {
327 struct device *controller; /* host/master side hardware */
328 int busnum; /* Bus number (in order of reg) */
Greg Kroah-Hartman1b26da12008-07-02 12:46:22 -0700329 const char *bus_name; /* stable id (PCI slot_name etc) */
Alan Sterndd990f12006-08-30 11:29:56 -0400330 u8 uses_dma; /* Does the host controller use DMA? */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700331 u8 otg_port; /* 0, or number of OTG/HNP port */
332 unsigned is_b_host:1; /* true during some HNP roleswitches */
333 unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
334
Alan Sternb724ae72005-10-24 15:36:00 -0400335 int devnum_next; /* Next open device number in
336 * round-robin allocation */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700337
338 struct usb_devmap devmap; /* device address allocation map */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339 struct usb_device *root_hub; /* Root hub */
340 struct list_head bus_list; /* list of busses */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341
342 int bandwidth_allocated; /* on this bus: how much of the time
343 * reserved for periodic (intr/iso)
344 * requests is used, on average?
345 * Units: microseconds/frame.
346 * Limits: Full/low speed reserve 90%,
347 * while high speed reserves 80%.
348 */
349 int bandwidth_int_reqs; /* number of Interrupt requests */
350 int bandwidth_isoc_reqs; /* number of Isoc. requests */
351
Kay Sievers9f8b17e2007-03-13 15:59:31 +0100352#ifdef CONFIG_USB_DEVICEFS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
Kay Sievers9f8b17e2007-03-13 15:59:31 +0100354#endif
Alan Sternb724ae72005-10-24 15:36:00 -0400355
Pete Zaitcevf150fa12008-11-13 21:31:21 -0700356#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357 struct mon_bus *mon_bus; /* non-null when associated */
358 int monitored; /* non-zero when monitored */
359#endif
360};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361
Alan Sternb724ae72005-10-24 15:36:00 -0400362/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363
364/* This is arbitrary.
365 * From USB 2.0 spec Table 11-13, offset 7, a hub can
366 * have up to 255 ports. The most yet reported is 10.
inaky@linux.intel.com43705252006-10-11 20:05:58 -0700367 *
368 * Current Wireless USB host hardware (Intel i1480 for example) allows
369 * up to 22 devices to connect. Upcoming hardware might raise that
370 * limit. Because the arrays need to add a bit for hub status data, we
371 * do 31, so plus one evens out to four bytes.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372 */
inaky@linux.intel.com43705252006-10-11 20:05:58 -0700373#define USB_MAXCHILDREN (31)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374
375struct usb_tt;
376
Randy Dunlapf476fba2008-02-13 18:33:15 -0800377/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378 * struct usb_device - kernel's representation of a USB device
Randy Dunlapf476fba2008-02-13 18:33:15 -0800379 * @devnum: device number; address on a USB bus
380 * @devpath: device ID string for use in messages (e.g., /port/...)
Sarah Sharp7206b002009-04-27 19:54:49 -0700381 * @route: tree topology hex string for use with xHCI
Randy Dunlapf476fba2008-02-13 18:33:15 -0800382 * @state: device state: configured, not attached, etc.
383 * @speed: device speed: high/full/low (or error)
384 * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
385 * @ttport: device port on that tt hub
386 * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
387 * @parent: our hub, unless we're the root
388 * @bus: bus we're part of
389 * @ep0: endpoint 0 data (default control pipe)
390 * @dev: generic device interface
391 * @descriptor: USB device descriptor
392 * @config: all of the device's configs
393 * @actconfig: the active configuration
394 * @ep_in: array of IN endpoints
395 * @ep_out: array of OUT endpoints
396 * @rawdescriptors: raw descriptors for each config
397 * @bus_mA: Current available from the bus
398 * @portnum: parent port number (origin 1)
399 * @level: number of USB hub ancestors
400 * @can_submit: URBs may be submitted
401 * @discon_suspended: disconnected while suspended
402 * @persist_enabled: USB_PERSIST enabled for this device
403 * @have_langid: whether string_langid is valid
404 * @authorized: policy has said we can use it;
405 * (user space) policy determines if we authorize this device to be
406 * used or not. By default, wired USB devices are authorized.
407 * WUSB devices are not, until we authorize them from user space.
408 * FIXME -- complete doc
Inaky Perez-Gonzalez3b52f122008-04-08 13:24:46 -0700409 * @authenticated: Crypto authentication passed
Randy Dunlapf476fba2008-02-13 18:33:15 -0800410 * @wusb: device is Wireless USB
411 * @string_langid: language ID for strings
412 * @product: iProduct string, if present (static)
413 * @manufacturer: iManufacturer string, if present (static)
414 * @serial: iSerialNumber string, if present (static)
415 * @filelist: usbfs files that are open to this device
416 * @usb_classdev: USB class device that was created for usbfs device
417 * access from userspace
418 * @usbfs_dentry: usbfs dentry entry for the device
419 * @maxchild: number of ports if hub
420 * @children: child devices - USB devices that are attached to this hub
421 * @pm_usage_cnt: usage counter for autosuspend
422 * @quirks: quirks of the whole device
423 * @urbnum: number of URBs submitted for the whole device
424 * @active_duration: total time device is not suspended
425 * @autosuspend: for delayed autosuspends
Alan Stern9ac39f22008-11-12 16:19:49 -0500426 * @autoresume: for autoresumes requested while in_interrupt
Randy Dunlapf476fba2008-02-13 18:33:15 -0800427 * @pm_mutex: protects PM operations
428 * @last_busy: time of last use
429 * @autosuspend_delay: in jiffies
430 * @connect_time: time device was first connected
431 * @auto_pm: autosuspend/resume in progress
432 * @do_remote_wakeup: remote wakeup should be enabled
433 * @reset_resume: needs reset instead of resume
434 * @autosuspend_disabled: autosuspend disabled by the user
435 * @autoresume_disabled: autoresume disabled by the user
436 * @skip_sys_resume: skip the next system resume
Inaky Perez-Gonzalez11e76ae2009-01-08 12:52:19 -0800437 * @wusb_dev: if this is a Wireless USB device, link to the WUSB
438 * specific data for the device.
Sarah Sharpc6515272009-04-27 19:57:26 -0700439 * @slot_id: Slot ID assigned by xHCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 *
Randy Dunlapf476fba2008-02-13 18:33:15 -0800441 * Notes:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442 * Usbcore drivers should not set usbdev->state directly. Instead use
443 * usb_set_device_state().
444 */
445struct usb_device {
Randy Dunlapf476fba2008-02-13 18:33:15 -0800446 int devnum;
447 char devpath [16];
Sarah Sharp7206b002009-04-27 19:54:49 -0700448 u32 route;
Randy Dunlapf476fba2008-02-13 18:33:15 -0800449 enum usb_device_state state;
450 enum usb_device_speed speed;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451
Randy Dunlapf476fba2008-02-13 18:33:15 -0800452 struct usb_tt *tt;
453 int ttport;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454
Randy Dunlapf476fba2008-02-13 18:33:15 -0800455 unsigned int toggle[2];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700456
Randy Dunlapf476fba2008-02-13 18:33:15 -0800457 struct usb_device *parent;
458 struct usb_bus *bus;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459 struct usb_host_endpoint ep0;
460
Randy Dunlapf476fba2008-02-13 18:33:15 -0800461 struct device dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462
Randy Dunlapf476fba2008-02-13 18:33:15 -0800463 struct usb_device_descriptor descriptor;
464 struct usb_host_config *config;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465
Randy Dunlapf476fba2008-02-13 18:33:15 -0800466 struct usb_host_config *actconfig;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700467 struct usb_host_endpoint *ep_in[16];
468 struct usb_host_endpoint *ep_out[16];
469
Randy Dunlapf476fba2008-02-13 18:33:15 -0800470 char **rawdescriptors;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471
Randy Dunlapf476fba2008-02-13 18:33:15 -0800472 unsigned short bus_mA;
473 u8 portnum;
474 u8 level;
Alan Stern55c52712005-11-23 12:03:12 -0500475
Randy Dunlapf476fba2008-02-13 18:33:15 -0800476 unsigned can_submit:1;
477 unsigned discon_suspended:1;
478 unsigned persist_enabled:1;
479 unsigned have_langid:1;
480 unsigned authorized:1;
Inaky Perez-Gonzalez3b52f122008-04-08 13:24:46 -0700481 unsigned authenticated:1;
Randy Dunlapf476fba2008-02-13 18:33:15 -0800482 unsigned wusb:1;
483 int string_langid;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700484
Alan Stern4f62efe2005-10-24 16:24:14 -0400485 /* static strings from the device */
Randy Dunlapf476fba2008-02-13 18:33:15 -0800486 char *product;
487 char *manufacturer;
488 char *serial;
Alan Stern4f62efe2005-10-24 16:24:14 -0400489
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490 struct list_head filelist;
Kay Sievers9f8b17e2007-03-13 15:59:31 +0100491#ifdef CONFIG_USB_DEVICE_CLASS
492 struct device *usb_classdev;
493#endif
494#ifdef CONFIG_USB_DEVICEFS
Randy Dunlapf476fba2008-02-13 18:33:15 -0800495 struct dentry *usbfs_dentry;
Kay Sievers9f8b17e2007-03-13 15:59:31 +0100496#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497
Randy Dunlapf476fba2008-02-13 18:33:15 -0800498 int maxchild;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 struct usb_device *children[USB_MAXCHILDREN];
Alan Stern645daaa2006-08-30 15:47:02 -0400500
Randy Dunlapf476fba2008-02-13 18:33:15 -0800501 int pm_usage_cnt;
502 u32 quirks;
503 atomic_t urbnum;
Alan Sternb5e795f2007-02-20 15:00:53 -0500504
Randy Dunlapf476fba2008-02-13 18:33:15 -0800505 unsigned long active_duration;
Sarah Sharp15123002007-12-21 16:54:15 -0800506
Alan Stern645daaa2006-08-30 15:47:02 -0400507#ifdef CONFIG_PM
Randy Dunlapf476fba2008-02-13 18:33:15 -0800508 struct delayed_work autosuspend;
Alan Stern9ac39f22008-11-12 16:19:49 -0500509 struct work_struct autoresume;
Randy Dunlapf476fba2008-02-13 18:33:15 -0800510 struct mutex pm_mutex;
Alan Stern645daaa2006-08-30 15:47:02 -0400511
Randy Dunlapf476fba2008-02-13 18:33:15 -0800512 unsigned long last_busy;
513 int autosuspend_delay;
514 unsigned long connect_time;
Alan Sternb5e795f2007-02-20 15:00:53 -0500515
Randy Dunlapf476fba2008-02-13 18:33:15 -0800516 unsigned auto_pm:1;
517 unsigned do_remote_wakeup:1;
518 unsigned reset_resume:1;
519 unsigned autosuspend_disabled:1;
520 unsigned autoresume_disabled:1;
521 unsigned skip_sys_resume:1;
Alan Stern645daaa2006-08-30 15:47:02 -0400522#endif
Inaky Perez-Gonzalezb1d8dfb2008-04-08 13:24:46 -0700523 struct wusb_dev *wusb_dev;
Sarah Sharpc6515272009-04-27 19:57:26 -0700524 int slot_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700525};
526#define to_usb_device(d) container_of(d, struct usb_device, dev)
527
528extern struct usb_device *usb_get_dev(struct usb_device *dev);
529extern void usb_put_dev(struct usb_device *dev);
530
Alan Stern9ad3d6c2005-11-17 17:10:32 -0500531/* USB device locking */
532#define usb_lock_device(udev) down(&(udev)->dev.sem)
533#define usb_unlock_device(udev) up(&(udev)->dev.sem)
534#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535extern int usb_lock_device_for_reset(struct usb_device *udev,
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -0300536 const struct usb_interface *iface);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537
538/* USB port reset for device reinitialization */
539extern int usb_reset_device(struct usb_device *dev);
Inaky Perez-Gonzalezdc023dc2008-11-13 10:31:35 -0800540extern void usb_queue_reset_device(struct usb_interface *dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700541
542extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
543
Alan Stern645daaa2006-08-30 15:47:02 -0400544/* USB autosuspend and autoresume */
545#ifdef CONFIG_USB_SUSPEND
Alan Stern692a1862006-10-30 17:07:51 -0500546extern int usb_autopm_set_interface(struct usb_interface *intf);
Alan Stern645daaa2006-08-30 15:47:02 -0400547extern int usb_autopm_get_interface(struct usb_interface *intf);
548extern void usb_autopm_put_interface(struct usb_interface *intf);
Alan Stern9ac39f22008-11-12 16:19:49 -0500549extern int usb_autopm_get_interface_async(struct usb_interface *intf);
550extern void usb_autopm_put_interface_async(struct usb_interface *intf);
Alan Stern645daaa2006-08-30 15:47:02 -0400551
Alan Stern692a1862006-10-30 17:07:51 -0500552static inline void usb_autopm_enable(struct usb_interface *intf)
553{
554 intf->pm_usage_cnt = 0;
555 usb_autopm_set_interface(intf);
556}
Alan Stern645daaa2006-08-30 15:47:02 -0400557
Alan Stern692a1862006-10-30 17:07:51 -0500558static inline void usb_autopm_disable(struct usb_interface *intf)
559{
560 intf->pm_usage_cnt = 1;
561 usb_autopm_set_interface(intf);
562}
563
Alan Stern19410442007-03-27 13:33:59 -0400564static inline void usb_mark_last_busy(struct usb_device *udev)
565{
566 udev->last_busy = jiffies;
567}
568
Alan Stern692a1862006-10-30 17:07:51 -0500569#else
570
571static inline int usb_autopm_set_interface(struct usb_interface *intf)
572{ return 0; }
573
574static inline int usb_autopm_get_interface(struct usb_interface *intf)
575{ return 0; }
576
Alan Stern9ac39f22008-11-12 16:19:49 -0500577static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
578{ return 0; }
579
Alan Stern692a1862006-10-30 17:07:51 -0500580static inline void usb_autopm_put_interface(struct usb_interface *intf)
581{ }
Alan Stern9ac39f22008-11-12 16:19:49 -0500582static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
583{ }
Alan Stern692a1862006-10-30 17:07:51 -0500584static inline void usb_autopm_enable(struct usb_interface *intf)
585{ }
586static inline void usb_autopm_disable(struct usb_interface *intf)
587{ }
Alan Stern19410442007-03-27 13:33:59 -0400588static inline void usb_mark_last_busy(struct usb_device *udev)
589{ }
Alan Stern692a1862006-10-30 17:07:51 -0500590#endif
Alan Stern645daaa2006-08-30 15:47:02 -0400591
Linus Torvalds1da177e2005-04-16 15:20:36 -0700592/*-------------------------------------------------------------------------*/
593
594/* for drivers using iso endpoints */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800595extern int usb_get_current_frame_number(struct usb_device *usb_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700596
597/* used these for multi-interface device registration */
598extern int usb_driver_claim_interface(struct usb_driver *driver,
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800599 struct usb_interface *iface, void *priv);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700600
601/**
602 * usb_interface_claimed - returns true iff an interface is claimed
603 * @iface: the interface being checked
604 *
605 * Returns true (nonzero) iff the interface is claimed, else false (zero).
606 * Callers must own the driver model's usb bus readlock. So driver
607 * probe() entries don't need extra locking, but other call contexts
608 * may need to explicitly claim that lock.
609 *
610 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800611static inline int usb_interface_claimed(struct usb_interface *iface)
612{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613 return (iface->dev.driver != NULL);
614}
615
616extern void usb_driver_release_interface(struct usb_driver *driver,
617 struct usb_interface *iface);
618const struct usb_device_id *usb_match_id(struct usb_interface *interface,
619 const struct usb_device_id *id);
Greg Kroah-Hartman93bacef2006-12-17 21:50:23 +0100620extern int usb_match_one_id(struct usb_interface *interface,
621 const struct usb_device_id *id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700622
623extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
624 int minor);
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -0300625extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626 unsigned ifnum);
627extern struct usb_host_interface *usb_altnum_to_altsetting(
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -0300628 const struct usb_interface *intf, unsigned int altnum);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629
630
631/**
632 * usb_make_path - returns stable device path in the usb tree
633 * @dev: the device whose path is being constructed
634 * @buf: where to put the string
635 * @size: how big is "buf"?
636 *
637 * Returns length of the string (> 0) or negative if size was too small.
638 *
639 * This identifier is intended to be "stable", reflecting physical paths in
640 * hardware such as physical bus addresses for host controllers or ports on
641 * USB hubs. That makes it stay the same until systems are physically
642 * reconfigured, by re-cabling a tree of USB devices or by moving USB host
643 * controllers. Adding and removing devices, including virtual root hubs
644 * in host controller driver modules, does not change these path identifers;
645 * neither does rebooting or re-enumerating. These are more useful identifiers
646 * than changeable ("unstable") ones like bus numbers or device addresses.
647 *
648 * With a partial exception for devices connected to USB 2.0 root hubs, these
649 * identifiers are also predictable. So long as the device tree isn't changed,
650 * plugging any USB device into a given hub port always gives it the same path.
651 * Because of the use of "companion" controllers, devices connected to ports on
652 * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
653 * high speed, and a different one if they are full or low speed.
654 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800655static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656{
657 int actual;
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800658 actual = snprintf(buf, size, "usb-%s-%s", dev->bus->bus_name,
659 dev->devpath);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660 return (actual >= (int)size) ? -1 : actual;
661}
662
663/*-------------------------------------------------------------------------*/
664
Alan Sternb724ae72005-10-24 15:36:00 -0400665#define USB_DEVICE_ID_MATCH_DEVICE \
666 (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
667#define USB_DEVICE_ID_MATCH_DEV_RANGE \
668 (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
669#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
670 (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671#define USB_DEVICE_ID_MATCH_DEV_INFO \
Alan Sternb724ae72005-10-24 15:36:00 -0400672 (USB_DEVICE_ID_MATCH_DEV_CLASS | \
673 USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \
674 USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700675#define USB_DEVICE_ID_MATCH_INT_INFO \
Alan Sternb724ae72005-10-24 15:36:00 -0400676 (USB_DEVICE_ID_MATCH_INT_CLASS | \
677 USB_DEVICE_ID_MATCH_INT_SUBCLASS | \
678 USB_DEVICE_ID_MATCH_INT_PROTOCOL)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700679
680/**
681 * USB_DEVICE - macro used to describe a specific usb device
682 * @vend: the 16 bit USB Vendor ID
683 * @prod: the 16 bit USB Product ID
684 *
685 * This macro is used to create a struct usb_device_id that matches a
686 * specific device.
687 */
688#define USB_DEVICE(vend,prod) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800689 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
690 .idVendor = (vend), \
691 .idProduct = (prod)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692/**
Randy Dunlapd0bcabc2008-02-29 22:03:07 -0800693 * USB_DEVICE_VER - describe a specific usb device with a version range
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694 * @vend: the 16 bit USB Vendor ID
695 * @prod: the 16 bit USB Product ID
696 * @lo: the bcdDevice_lo value
697 * @hi: the bcdDevice_hi value
698 *
699 * This macro is used to create a struct usb_device_id that matches a
700 * specific device, with a version range.
701 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800702#define USB_DEVICE_VER(vend, prod, lo, hi) \
Alan Sternb724ae72005-10-24 15:36:00 -0400703 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800704 .idVendor = (vend), \
705 .idProduct = (prod), \
706 .bcdDevice_lo = (lo), \
707 .bcdDevice_hi = (hi)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700708
709/**
Randy Dunlapd0bcabc2008-02-29 22:03:07 -0800710 * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
Jan Kratochvilf836ac82007-05-09 00:26:15 -0400711 * @vend: the 16 bit USB Vendor ID
712 * @prod: the 16 bit USB Product ID
713 * @pr: bInterfaceProtocol value
714 *
715 * This macro is used to create a struct usb_device_id that matches a
716 * specific interface protocol of devices.
717 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800718#define USB_DEVICE_INTERFACE_PROTOCOL(vend, prod, pr) \
719 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
720 USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
Jan Kratochvilf836ac82007-05-09 00:26:15 -0400721 .idVendor = (vend), \
722 .idProduct = (prod), \
723 .bInterfaceProtocol = (pr)
724
725/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700726 * USB_DEVICE_INFO - macro used to describe a class of usb devices
727 * @cl: bDeviceClass value
728 * @sc: bDeviceSubClass value
729 * @pr: bDeviceProtocol value
730 *
731 * This macro is used to create a struct usb_device_id that matches a
732 * specific class of devices.
733 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800734#define USB_DEVICE_INFO(cl, sc, pr) \
735 .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, \
736 .bDeviceClass = (cl), \
737 .bDeviceSubClass = (sc), \
738 .bDeviceProtocol = (pr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700739
740/**
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800741 * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
Linus Torvalds1da177e2005-04-16 15:20:36 -0700742 * @cl: bInterfaceClass value
743 * @sc: bInterfaceSubClass value
744 * @pr: bInterfaceProtocol value
745 *
746 * This macro is used to create a struct usb_device_id that matches a
747 * specific class of interfaces.
748 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800749#define USB_INTERFACE_INFO(cl, sc, pr) \
750 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, \
751 .bInterfaceClass = (cl), \
752 .bInterfaceSubClass = (sc), \
753 .bInterfaceProtocol = (pr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700754
Daniel Drake8538f962007-05-10 00:32:24 +0100755/**
Randy Dunlapd0bcabc2008-02-29 22:03:07 -0800756 * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
Daniel Drake8538f962007-05-10 00:32:24 +0100757 * @vend: the 16 bit USB Vendor ID
758 * @prod: the 16 bit USB Product ID
759 * @cl: bInterfaceClass value
760 * @sc: bInterfaceSubClass value
761 * @pr: bInterfaceProtocol value
762 *
763 * This macro is used to create a struct usb_device_id that matches a
764 * specific device with a specific class of interfaces.
765 *
766 * This is especially useful when explicitly matching devices that have
767 * vendor specific bDeviceClass values, but standards-compliant interfaces.
768 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800769#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, cl, sc, pr) \
Daniel Drake8538f962007-05-10 00:32:24 +0100770 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
771 | USB_DEVICE_ID_MATCH_DEVICE, \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800772 .idVendor = (vend), \
773 .idProduct = (prod), \
Daniel Drake8538f962007-05-10 00:32:24 +0100774 .bInterfaceClass = (cl), \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -0800775 .bInterfaceSubClass = (sc), \
776 .bInterfaceProtocol = (pr)
Daniel Drake8538f962007-05-10 00:32:24 +0100777
Alan Sternb724ae72005-10-24 15:36:00 -0400778/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700779
Greg Kroah-Hartman93bacef2006-12-17 21:50:23 +0100780/* Stuff for dynamic usb ids */
Greg Kroah-Hartman733260f2005-11-16 13:41:28 -0800781struct usb_dynids {
782 spinlock_t lock;
783 struct list_head list;
784};
785
Greg Kroah-Hartman93bacef2006-12-17 21:50:23 +0100786struct usb_dynid {
787 struct list_head node;
788 struct usb_device_id id;
789};
790
791extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
792 struct device_driver *driver,
793 const char *buf, size_t count);
794
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795/**
Alan Stern8bb54ab2006-07-01 22:08:49 -0400796 * struct usbdrv_wrap - wrapper for driver-model structure
797 * @driver: The driver-model core driver structure.
798 * @for_devices: Non-zero for device drivers, 0 for interface drivers.
799 */
800struct usbdrv_wrap {
801 struct device_driver driver;
802 int for_devices;
803};
804
805/**
806 * struct usb_driver - identifies USB interface driver to usbcore
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807 * @name: The driver name should be unique among USB drivers,
808 * and should normally be the same as the module name.
809 * @probe: Called to see if the driver is willing to manage a particular
810 * interface on a device. If it is, probe returns zero and uses
Oliver Neukum7ef4f062008-04-10 15:15:37 +0200811 * usb_set_intfdata() to associate driver-specific data with the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700812 * interface. It may also use usb_set_interface() to specify the
813 * appropriate altsetting. If unwilling to manage the interface,
Oliver Neukum7ef4f062008-04-10 15:15:37 +0200814 * return -ENODEV, if genuine IO errors occured, an appropriate
815 * negative errno value.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700816 * @disconnect: Called when the interface is no longer accessible, usually
817 * because its device has been (or is being) disconnected or the
818 * driver module is being unloaded.
819 * @ioctl: Used for drivers that want to talk to userspace through
820 * the "usbfs" filesystem. This lets devices provide ways to
821 * expose information to user space regardless of where they
822 * do (or don't) show up otherwise in the filesystem.
823 * @suspend: Called when the device is going to be suspended by the system.
824 * @resume: Called when the device is being resumed by the system.
Alan Sternf07600c2007-05-30 15:38:16 -0400825 * @reset_resume: Called when the suspended device has been reset instead
826 * of being resumed.
Ming Lei742120c2008-06-18 22:00:29 +0800827 * @pre_reset: Called by usb_reset_device() when the device
Alan Stern79efa092006-06-01 13:33:42 -0400828 * is about to be reset.
Ming Lei742120c2008-06-18 22:00:29 +0800829 * @post_reset: Called by usb_reset_device() after the device
Oliver Neukum7ef4f062008-04-10 15:15:37 +0200830 * has been reset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831 * @id_table: USB drivers use ID table to support hotplugging.
832 * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
833 * or your driver's probe function will never get called.
Greg Kroah-Hartman733260f2005-11-16 13:41:28 -0800834 * @dynids: used internally to hold the list of dynamically added device
835 * ids for this driver.
Alan Stern8bb54ab2006-07-01 22:08:49 -0400836 * @drvwrap: Driver-model core structure wrapper.
Greg Kroah-Hartmanba9dc652005-11-16 13:41:28 -0800837 * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
838 * added to this driver by preventing the sysfs file from being created.
Alan Stern645daaa2006-08-30 15:47:02 -0400839 * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
840 * for interfaces bound to this driver.
Alan Stern9da82bd2008-05-08 11:54:37 -0400841 * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
842 * endpoints before calling the driver's disconnect method.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700843 *
Alan Stern8bb54ab2006-07-01 22:08:49 -0400844 * USB interface drivers must provide a name, probe() and disconnect()
845 * methods, and an id_table. Other driver fields are optional.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846 *
847 * The id_table is used in hotplugging. It holds a set of descriptors,
848 * and specialized data may be associated with each entry. That table
849 * is used by both user and kernel mode hotplugging support.
850 *
851 * The probe() and disconnect() methods are called in a context where
852 * they can sleep, but they should avoid abusing the privilege. Most
853 * work to connect to a device should be done when the device is opened,
854 * and undone at the last close. The disconnect code needs to address
855 * concurrency issues with respect to open() and close() methods, as
856 * well as forcing all pending I/O requests to complete (by unlinking
857 * them as necessary, and blocking until the unlinks complete).
858 */
859struct usb_driver {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860 const char *name;
861
862 int (*probe) (struct usb_interface *intf,
863 const struct usb_device_id *id);
864
865 void (*disconnect) (struct usb_interface *intf);
866
Alan Sternb724ae72005-10-24 15:36:00 -0400867 int (*ioctl) (struct usb_interface *intf, unsigned int code,
868 void *buf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869
David Brownell27d72e82005-04-18 17:39:22 -0700870 int (*suspend) (struct usb_interface *intf, pm_message_t message);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700871 int (*resume) (struct usb_interface *intf);
Alan Sternf07600c2007-05-30 15:38:16 -0400872 int (*reset_resume)(struct usb_interface *intf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700873
Alan Sternf07600c2007-05-30 15:38:16 -0400874 int (*pre_reset)(struct usb_interface *intf);
875 int (*post_reset)(struct usb_interface *intf);
Alan Stern79efa092006-06-01 13:33:42 -0400876
Linus Torvalds1da177e2005-04-16 15:20:36 -0700877 const struct usb_device_id *id_table;
878
Greg Kroah-Hartman733260f2005-11-16 13:41:28 -0800879 struct usb_dynids dynids;
Alan Stern8bb54ab2006-07-01 22:08:49 -0400880 struct usbdrv_wrap drvwrap;
Greg Kroah-Hartmanba9dc652005-11-16 13:41:28 -0800881 unsigned int no_dynamic_id:1;
Alan Stern645daaa2006-08-30 15:47:02 -0400882 unsigned int supports_autosuspend:1;
Alan Stern9da82bd2008-05-08 11:54:37 -0400883 unsigned int soft_unbind:1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700884};
Alan Stern8bb54ab2006-07-01 22:08:49 -0400885#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
886
887/**
888 * struct usb_device_driver - identifies USB device driver to usbcore
889 * @name: The driver name should be unique among USB drivers,
890 * and should normally be the same as the module name.
891 * @probe: Called to see if the driver is willing to manage a particular
892 * device. If it is, probe returns zero and uses dev_set_drvdata()
893 * to associate driver-specific data with the device. If unwilling
894 * to manage the device, return a negative errno value.
895 * @disconnect: Called when the device is no longer accessible, usually
896 * because it has been (or is being) disconnected or the driver's
897 * module is being unloaded.
898 * @suspend: Called when the device is going to be suspended by the system.
899 * @resume: Called when the device is being resumed by the system.
900 * @drvwrap: Driver-model core structure wrapper.
Alan Stern645daaa2006-08-30 15:47:02 -0400901 * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
902 * for devices bound to this driver.
Alan Stern8bb54ab2006-07-01 22:08:49 -0400903 *
904 * USB drivers must provide all the fields listed above except drvwrap.
905 */
906struct usb_device_driver {
907 const char *name;
908
909 int (*probe) (struct usb_device *udev);
910 void (*disconnect) (struct usb_device *udev);
911
912 int (*suspend) (struct usb_device *udev, pm_message_t message);
Alan Stern65bfd292008-11-25 16:39:18 -0500913 int (*resume) (struct usb_device *udev, pm_message_t message);
Alan Stern8bb54ab2006-07-01 22:08:49 -0400914 struct usbdrv_wrap drvwrap;
Alan Stern645daaa2006-08-30 15:47:02 -0400915 unsigned int supports_autosuspend:1;
Alan Stern8bb54ab2006-07-01 22:08:49 -0400916};
917#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \
918 drvwrap.driver)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700919
920extern struct bus_type usb_bus_type;
921
922/**
923 * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
Greg Kroah-Hartmand6e5bcf2005-06-20 21:15:16 -0700924 * @name: the usb class device name for this driver. Will show up in sysfs.
Kay Sieverse454cea2009-09-18 23:01:12 +0200925 * @devnode: Callback to provide a naming hint for a possible
Randy Dunlape376bbb2009-06-18 10:39:11 -0700926 * device node to create.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927 * @fops: pointer to the struct file_operations of this driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700928 * @minor_base: the start of the minor range for this driver.
929 *
930 * This structure is used for the usb_register_dev() and
931 * usb_unregister_dev() functions, to consolidate a number of the
932 * parameters used for them.
933 */
934struct usb_class_driver {
935 char *name;
Kay Sieverse454cea2009-09-18 23:01:12 +0200936 char *(*devnode)(struct device *dev, mode_t *mode);
Arjan van de Ven99ac48f2006-03-28 01:56:41 -0800937 const struct file_operations *fops;
Greg Kroah-Hartmand6e5bcf2005-06-20 21:15:16 -0700938 int minor_base;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939};
940
941/*
942 * use these in module_init()/module_exit()
943 * and don't forget MODULE_DEVICE_TABLE(usb, ...)
944 */
Greg Kroah-Hartman80f745f2007-01-15 11:50:02 -0800945extern int usb_register_driver(struct usb_driver *, struct module *,
946 const char *);
Greg Kroah-Hartman2143acc2005-11-21 14:53:03 -0800947static inline int usb_register(struct usb_driver *driver)
948{
Greg Kroah-Hartman80f745f2007-01-15 11:50:02 -0800949 return usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
Greg Kroah-Hartman2143acc2005-11-21 14:53:03 -0800950}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700951extern void usb_deregister(struct usb_driver *);
952
Alan Stern8bb54ab2006-07-01 22:08:49 -0400953extern int usb_register_device_driver(struct usb_device_driver *,
954 struct module *);
955extern void usb_deregister_device_driver(struct usb_device_driver *);
956
Linus Torvalds1da177e2005-04-16 15:20:36 -0700957extern int usb_register_dev(struct usb_interface *intf,
958 struct usb_class_driver *class_driver);
959extern void usb_deregister_dev(struct usb_interface *intf,
960 struct usb_class_driver *class_driver);
961
962extern int usb_disabled(void);
963
Alan Sternb724ae72005-10-24 15:36:00 -0400964/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700965
966/*
967 * URB support, for asynchronous request completions
968 */
969
970/*
971 * urb->transfer_flags:
Alan Sternfea34092007-07-30 17:06:16 -0400972 *
973 * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
Linus Torvalds1da177e2005-04-16 15:20:36 -0700974 */
975#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
Alan Sternb724ae72005-10-24 15:36:00 -0400976#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame
977 * ignored */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700978#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
979#define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700980#define URB_NO_FSBR 0x0020 /* UHCI-specific */
Alan Sternb724ae72005-10-24 15:36:00 -0400981#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
982#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt
983 * needed */
Marcel Holtmann8b3b01c2007-06-13 08:02:11 +0200984#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700985
Alan Sternfea34092007-07-30 17:06:16 -0400986#define URB_DIR_IN 0x0200 /* Transfer from device to host */
987#define URB_DIR_OUT 0
988#define URB_DIR_MASK URB_DIR_IN
989
Linus Torvalds1da177e2005-04-16 15:20:36 -0700990struct usb_iso_packet_descriptor {
991 unsigned int offset;
992 unsigned int length; /* expected length */
993 unsigned int actual_length;
Pete Zaitcevd1bbb602007-02-11 13:56:13 -0800994 int status;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700995};
996
997struct urb;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700998
Oliver Neukum51a2f072007-05-25 13:40:56 +0200999struct usb_anchor {
1000 struct list_head urb_list;
1001 wait_queue_head_t wait;
1002 spinlock_t lock;
Oliver Neukum6a2839b2008-07-29 16:18:47 +02001003 unsigned int poisoned:1;
Oliver Neukum51a2f072007-05-25 13:40:56 +02001004};
1005
1006static inline void init_usb_anchor(struct usb_anchor *anchor)
1007{
1008 INIT_LIST_HEAD(&anchor->urb_list);
1009 init_waitqueue_head(&anchor->wait);
1010 spin_lock_init(&anchor->lock);
1011}
1012
David Howells7d12e782006-10-05 14:55:46 +01001013typedef void (*usb_complete_t)(struct urb *);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014
1015/**
1016 * struct urb - USB Request Block
1017 * @urb_list: For use by current owner of the URB.
Oliver Neukum51a2f072007-05-25 13:40:56 +02001018 * @anchor_list: membership in the list of an anchor
1019 * @anchor: to anchor URBs to a common mooring
Alan Stern5b653c72007-07-30 17:04:37 -04001020 * @ep: Points to the endpoint's data structure. Will eventually
1021 * replace @pipe.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001022 * @pipe: Holds endpoint number, direction, type, and more.
1023 * Create these values with the eight macros available;
1024 * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
1025 * (control), "bulk", "int" (interrupt), or "iso" (isochronous).
1026 * For example usb_sndbulkpipe() or usb_rcvintpipe(). Endpoint
1027 * numbers range from zero to fifteen. Note that "in" endpoint two
1028 * is a different endpoint (and pipe) from "out" endpoint two.
1029 * The current configuration controls the existence, type, and
1030 * maximum packet size of any given endpoint.
1031 * @dev: Identifies the USB device to perform the request.
1032 * @status: This is read in non-iso completion functions to get the
1033 * status of the particular request. ISO requests only use it
1034 * to tell whether the URB was unlinked; detailed status for
1035 * each frame is in the fields of the iso_frame-desc.
1036 * @transfer_flags: A variety of flags may be used to affect how URB
1037 * submission, unlinking, or operation are handled. Different
1038 * kinds of URB can use different flags.
Pete Zaitcev4e9e9202009-06-11 08:53:20 -06001039 * @transfer_buffer: This identifies the buffer to (or from) which the I/O
1040 * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
1041 * (however, do not leave garbage in transfer_buffer even then).
1042 * This buffer must be suitable for DMA; allocate it with
Linus Torvalds1da177e2005-04-16 15:20:36 -07001043 * kmalloc() or equivalent. For transfers to "in" endpoints, contents
1044 * of this buffer will be modified. This buffer is used for the data
1045 * stage of control transfers.
1046 * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP,
1047 * the device driver is saying that it provided this DMA address,
1048 * which the host controller driver should use in preference to the
1049 * transfer_buffer.
Randy Dunlape376bbb2009-06-18 10:39:11 -07001050 * @sg: scatter gather buffer list
1051 * @num_sgs: number of entries in the sg list
Linus Torvalds1da177e2005-04-16 15:20:36 -07001052 * @transfer_buffer_length: How big is transfer_buffer. The transfer may
1053 * be broken up into chunks according to the current maximum packet
1054 * size for the endpoint, which is a function of the configuration
1055 * and is encoded in the pipe. When the length is zero, neither
1056 * transfer_buffer nor transfer_dma is used.
1057 * @actual_length: This is read in non-iso completion functions, and
1058 * it tells how many bytes (out of transfer_buffer_length) were
1059 * transferred. It will normally be the same as requested, unless
1060 * either an error was reported or a short read was performed.
1061 * The URB_SHORT_NOT_OK transfer flag may be used to make such
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001062 * short reads be reported as errors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063 * @setup_packet: Only used for control transfers, this points to eight bytes
1064 * of setup data. Control transfers always start by sending this data
1065 * to the device. Then transfer_buffer is read or written, if needed.
1066 * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
1067 * device driver has provided this DMA address for the setup packet.
1068 * The host controller driver should use this in preference to
Sarah Sharp6d65b782009-04-27 19:57:50 -07001069 * setup_packet, but the HCD may chose to ignore the address if it must
1070 * copy the setup packet into internal structures. Therefore, setup_packet
1071 * must always point to a valid buffer.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001072 * @start_frame: Returns the initial frame for isochronous transfers.
1073 * @number_of_packets: Lists the number of ISO transfer buffers.
1074 * @interval: Specifies the polling interval for interrupt or isochronous
Anand Gadiyar411c9402009-07-07 15:24:23 +05301075 * transfers. The units are frames (milliseconds) for full and low
Linus Torvalds1da177e2005-04-16 15:20:36 -07001076 * speed devices, and microframes (1/8 millisecond) for highspeed ones.
1077 * @error_count: Returns the number of ISO transfers that reported errors.
1078 * @context: For use in completion functions. This normally points to
1079 * request-specific driver context.
1080 * @complete: Completion handler. This URB is passed as the parameter to the
1081 * completion function. The completion function may then do what
1082 * it likes with the URB, including resubmitting or freeing it.
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001083 * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084 * collect the transfer status for each buffer.
1085 *
1086 * This structure identifies USB transfer requests. URBs must be allocated by
1087 * calling usb_alloc_urb() and freed with a call to usb_free_urb().
1088 * Initialization may be done using various usb_fill_*_urb() functions. URBs
1089 * are submitted using usb_submit_urb(), and pending requests may be canceled
1090 * using usb_unlink_urb() or usb_kill_urb().
1091 *
1092 * Data Transfer Buffers:
1093 *
1094 * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise
1095 * taken from the general page pool. That is provided by transfer_buffer
1096 * (control requests also use setup_packet), and host controller drivers
1097 * perform a dma mapping (and unmapping) for each buffer transferred. Those
1098 * mapping operations can be expensive on some platforms (perhaps using a dma
1099 * bounce buffer or talking to an IOMMU),
1100 * although they're cheap on commodity x86 and ppc hardware.
1101 *
1102 * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
1103 * which tell the host controller driver that no such mapping is needed since
1104 * the device driver is DMA-aware. For example, a device driver might
1105 * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
1106 * When these transfer flags are provided, host controller drivers will
1107 * attempt to use the dma addresses found in the transfer_dma and/or
Pete Zaitcev4e9e9202009-06-11 08:53:20 -06001108 * setup_dma fields rather than determining a dma address themselves.
1109 *
1110 * Note that transfer_buffer must still be set if the controller
1111 * does not support DMA (as indicated by bus.uses_dma) and when talking
1112 * to root hub. If you have to trasfer between highmem zone and the device
1113 * on such controller, create a bounce buffer or bail out with an error.
1114 * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
1115 * capable, assign NULL to it, so that usbmon knows not to use the value.
1116 * The setup_packet must always be set, so it cannot be located in highmem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001117 *
1118 * Initialization:
1119 *
1120 * All URBs submitted must initialize the dev, pipe, transfer_flags (may be
Alan Sternb375a042005-07-29 16:11:07 -04001121 * zero), and complete fields. All URBs must also initialize
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122 * transfer_buffer and transfer_buffer_length. They may provide the
1123 * URB_SHORT_NOT_OK transfer flag, indicating that short reads are
1124 * to be treated as errors; that flag is invalid for write requests.
1125 *
1126 * Bulk URBs may
1127 * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers
1128 * should always terminate with a short packet, even if it means adding an
1129 * extra zero length packet.
1130 *
1131 * Control URBs must provide a setup_packet. The setup_packet and
1132 * transfer_buffer may each be mapped for DMA or not, independently of
1133 * the other. The transfer_flags bits URB_NO_TRANSFER_DMA_MAP and
1134 * URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped.
1135 * URB_NO_SETUP_DMA_MAP is ignored for non-control URBs.
1136 *
1137 * Interrupt URBs must provide an interval, saying how often (in milliseconds
1138 * or, for highspeed devices, 125 microsecond units)
1139 * to poll for transfers. After the URB has been submitted, the interval
1140 * field reflects how the transfer was actually scheduled.
1141 * The polling interval may be more frequent than requested.
1142 * For example, some controllers have a maximum interval of 32 milliseconds,
1143 * while others support intervals of up to 1024 milliseconds.
1144 * Isochronous URBs also have transfer intervals. (Note that for isochronous
1145 * endpoints, as well as high speed interrupt endpoints, the encoding of
1146 * the transfer interval in the endpoint descriptor is logarithmic.
1147 * Device drivers must convert that value to linear units themselves.)
1148 *
1149 * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
1150 * the host controller to schedule the transfer as soon as bandwidth
1151 * utilization allows, and then set start_frame to reflect the actual frame
1152 * selected during submission. Otherwise drivers must specify the start_frame
1153 * and handle the case where the transfer can't begin then. However, drivers
1154 * won't know how bandwidth is currently allocated, and while they can
1155 * find the current frame using usb_get_current_frame_number () they can't
1156 * know the range for that frame number. (Ranges for frame counter values
1157 * are HC-specific, and can go from 256 to 65536 frames from "now".)
1158 *
1159 * Isochronous URBs have a different data transfer model, in part because
1160 * the quality of service is only "best effort". Callers provide specially
1161 * allocated URBs, with number_of_packets worth of iso_frame_desc structures
1162 * at the end. Each such packet is an individual ISO transfer. Isochronous
1163 * URBs are normally queued, submitted by drivers to arrange that
1164 * transfers are at least double buffered, and then explicitly resubmitted
1165 * in completion handlers, so
1166 * that data (such as audio or video) streams at as constant a rate as the
1167 * host controller scheduler can support.
1168 *
1169 * Completion Callbacks:
1170 *
1171 * The completion callback is made in_interrupt(), and one of the first
1172 * things that a completion handler should do is check the status field.
1173 * The status field is provided for all URBs. It is used to report
1174 * unlinked URBs, and status for all non-ISO transfers. It should not
1175 * be examined before the URB is returned to the completion handler.
1176 *
1177 * The context field is normally used to link URBs back to the relevant
1178 * driver or request state.
1179 *
1180 * When the completion callback is invoked for non-isochronous URBs, the
1181 * actual_length field tells how many bytes were transferred. This field
1182 * is updated even when the URB terminated with an error or was unlinked.
1183 *
1184 * ISO transfer status is reported in the status and actual_length fields
1185 * of the iso_frame_desc array, and the number of errors is reported in
1186 * error_count. Completion callbacks for ISO transfers will normally
1187 * (re)submit URBs to ensure a constant transfer rate.
Roman Kagan719df462005-05-06 00:55:56 +04001188 *
1189 * Note that even fields marked "public" should not be touched by the driver
1190 * when the urb is owned by the hcd, that is, since the call to
1191 * usb_submit_urb() till the entry into the completion routine.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001193struct urb {
Martin Waitzaeec46b2005-11-13 16:08:13 -08001194 /* private: usb core and host controller only fields in the urb */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001195 struct kref kref; /* reference count of the URB */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001196 void *hcpriv; /* private data for host controller */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001197 atomic_t use_count; /* concurrent submissions counter */
Ming Lei49367d82008-12-12 21:38:45 +08001198 atomic_t reject; /* submissions will fail */
Alan Sterneb231052007-08-21 15:40:36 -04001199 int unlinked; /* unlink error code */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001200
Martin Waitzaeec46b2005-11-13 16:08:13 -08001201 /* public: documented fields in the urb that can be used by drivers */
Alan Sternb724ae72005-10-24 15:36:00 -04001202 struct list_head urb_list; /* list head for use by the urb's
1203 * current owner */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001204 struct list_head anchor_list; /* the URB may be anchored */
Oliver Neukum51a2f072007-05-25 13:40:56 +02001205 struct usb_anchor *anchor;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001206 struct usb_device *dev; /* (in) pointer to associated device */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001207 struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001208 unsigned int pipe; /* (in) pipe information */
1209 int status; /* (return) non-ISO status */
1210 unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
1211 void *transfer_buffer; /* (in) associated data buffer */
1212 dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
Sarah Sharpe04748e2009-04-27 19:59:01 -07001213 struct usb_sg_request *sg; /* (in) scatter gather buffer list */
1214 int num_sgs; /* (in) number of entries in the sg list */
Greg Kroah-Hartman16e2e5f2009-03-03 16:44:13 -08001215 u32 transfer_buffer_length; /* (in) data buffer length */
Greg Kroah-Hartman8c209e62009-03-06 21:31:03 -08001216 u32 actual_length; /* (return) actual transfer length */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001217 unsigned char *setup_packet; /* (in) setup packet (control only) */
1218 dma_addr_t setup_dma; /* (in) dma addr for setup_packet */
1219 int start_frame; /* (modify) start frame (ISO) */
1220 int number_of_packets; /* (in) number of ISO packets */
Alan Sternb724ae72005-10-24 15:36:00 -04001221 int interval; /* (modify) transfer interval
1222 * (INT/ISO) */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223 int error_count; /* (return) number of ISO errors */
1224 void *context; /* (in) context for completion */
1225 usb_complete_t complete; /* (in) completion routine */
Alan Sternb724ae72005-10-24 15:36:00 -04001226 struct usb_iso_packet_descriptor iso_frame_desc[0];
1227 /* (in) ISO ONLY */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001228};
1229
Alan Sternb724ae72005-10-24 15:36:00 -04001230/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231
1232/**
1233 * usb_fill_control_urb - initializes a control urb
1234 * @urb: pointer to the urb to initialize.
1235 * @dev: pointer to the struct usb_device for this urb.
1236 * @pipe: the endpoint pipe
1237 * @setup_packet: pointer to the setup_packet buffer
1238 * @transfer_buffer: pointer to the transfer buffer
1239 * @buffer_length: length of the transfer buffer
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001240 * @complete_fn: pointer to the usb_complete_t function
Linus Torvalds1da177e2005-04-16 15:20:36 -07001241 * @context: what to set the urb context to.
1242 *
1243 * Initializes a control urb with the proper information needed to submit
1244 * it to a device.
1245 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001246static inline void usb_fill_control_urb(struct urb *urb,
1247 struct usb_device *dev,
1248 unsigned int pipe,
1249 unsigned char *setup_packet,
1250 void *transfer_buffer,
1251 int buffer_length,
1252 usb_complete_t complete_fn,
1253 void *context)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001254{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001255 urb->dev = dev;
1256 urb->pipe = pipe;
1257 urb->setup_packet = setup_packet;
1258 urb->transfer_buffer = transfer_buffer;
1259 urb->transfer_buffer_length = buffer_length;
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001260 urb->complete = complete_fn;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001261 urb->context = context;
1262}
1263
1264/**
1265 * usb_fill_bulk_urb - macro to help initialize a bulk urb
1266 * @urb: pointer to the urb to initialize.
1267 * @dev: pointer to the struct usb_device for this urb.
1268 * @pipe: the endpoint pipe
1269 * @transfer_buffer: pointer to the transfer buffer
1270 * @buffer_length: length of the transfer buffer
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001271 * @complete_fn: pointer to the usb_complete_t function
Linus Torvalds1da177e2005-04-16 15:20:36 -07001272 * @context: what to set the urb context to.
1273 *
1274 * Initializes a bulk urb with the proper information needed to submit it
1275 * to a device.
1276 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001277static inline void usb_fill_bulk_urb(struct urb *urb,
1278 struct usb_device *dev,
1279 unsigned int pipe,
1280 void *transfer_buffer,
1281 int buffer_length,
1282 usb_complete_t complete_fn,
1283 void *context)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001285 urb->dev = dev;
1286 urb->pipe = pipe;
1287 urb->transfer_buffer = transfer_buffer;
1288 urb->transfer_buffer_length = buffer_length;
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001289 urb->complete = complete_fn;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001290 urb->context = context;
1291}
1292
1293/**
1294 * usb_fill_int_urb - macro to help initialize a interrupt urb
1295 * @urb: pointer to the urb to initialize.
1296 * @dev: pointer to the struct usb_device for this urb.
1297 * @pipe: the endpoint pipe
1298 * @transfer_buffer: pointer to the transfer buffer
1299 * @buffer_length: length of the transfer buffer
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001300 * @complete_fn: pointer to the usb_complete_t function
Linus Torvalds1da177e2005-04-16 15:20:36 -07001301 * @context: what to set the urb context to.
1302 * @interval: what to set the urb interval to, encoded like
1303 * the endpoint descriptor's bInterval value.
1304 *
1305 * Initializes a interrupt urb with the proper information needed to submit
1306 * it to a device.
1307 * Note that high speed interrupt endpoints use a logarithmic encoding of
1308 * the endpoint interval, and express polling intervals in microframes
1309 * (eight per millisecond) rather than in frames (one per millisecond).
1310 */
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001311static inline void usb_fill_int_urb(struct urb *urb,
1312 struct usb_device *dev,
1313 unsigned int pipe,
1314 void *transfer_buffer,
1315 int buffer_length,
1316 usb_complete_t complete_fn,
1317 void *context,
1318 int interval)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001320 urb->dev = dev;
1321 urb->pipe = pipe;
1322 urb->transfer_buffer = transfer_buffer;
1323 urb->transfer_buffer_length = buffer_length;
Jesper Juhl3d5b2512006-07-30 18:43:43 +02001324 urb->complete = complete_fn;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001325 urb->context = context;
1326 if (dev->speed == USB_SPEED_HIGH)
1327 urb->interval = 1 << (interval - 1);
1328 else
1329 urb->interval = interval;
1330 urb->start_frame = -1;
1331}
1332
1333extern void usb_init_urb(struct urb *urb);
Al Viro55016f12005-10-21 03:21:58 -04001334extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001335extern void usb_free_urb(struct urb *urb);
1336#define usb_put_urb usb_free_urb
1337extern struct urb *usb_get_urb(struct urb *urb);
Al Viro55016f12005-10-21 03:21:58 -04001338extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001339extern int usb_unlink_urb(struct urb *urb);
1340extern void usb_kill_urb(struct urb *urb);
Oliver Neukum55b447b2008-07-29 15:26:15 +02001341extern void usb_poison_urb(struct urb *urb);
1342extern void usb_unpoison_urb(struct urb *urb);
Oliver Neukum51a2f072007-05-25 13:40:56 +02001343extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
Oliver Neukum6a2839b2008-07-29 16:18:47 +02001344extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
Oliver Neukum856395d2008-12-18 09:17:49 +01001345extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
Oliver Neukumeda76952008-04-10 14:07:37 +02001346extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
Oliver Neukum51a2f072007-05-25 13:40:56 +02001347extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
1348extern void usb_unanchor_urb(struct urb *urb);
1349extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
1350 unsigned int timeout);
Oliver Neukum19876252008-08-25 22:40:25 +02001351extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
1352extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
1353extern int usb_anchor_empty(struct usb_anchor *anchor);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001354
Alan Sternfea34092007-07-30 17:06:16 -04001355/**
1356 * usb_urb_dir_in - check if an URB describes an IN transfer
1357 * @urb: URB to be checked
1358 *
1359 * Returns 1 if @urb describes an IN transfer (device-to-host),
1360 * otherwise 0.
1361 */
1362static inline int usb_urb_dir_in(struct urb *urb)
1363{
Alan Sternd617bc82007-08-02 15:04:52 -04001364 return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
Alan Sternfea34092007-07-30 17:06:16 -04001365}
1366
1367/**
1368 * usb_urb_dir_out - check if an URB describes an OUT transfer
1369 * @urb: URB to be checked
1370 *
1371 * Returns 1 if @urb describes an OUT transfer (host-to-device),
1372 * otherwise 0.
1373 */
1374static inline int usb_urb_dir_out(struct urb *urb)
1375{
1376 return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
1377}
1378
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001379void *usb_buffer_alloc(struct usb_device *dev, size_t size,
Al Viro55016f12005-10-21 03:21:58 -04001380 gfp_t mem_flags, dma_addr_t *dma);
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001381void usb_buffer_free(struct usb_device *dev, size_t size,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001382 void *addr, dma_addr_t dma);
1383
1384#if 0
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001385struct urb *usb_buffer_map(struct urb *urb);
1386void usb_buffer_dmasync(struct urb *urb);
1387void usb_buffer_unmap(struct urb *urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001388#endif
1389
1390struct scatterlist;
Alan Stern5e60a162007-07-30 17:07:21 -04001391int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -03001392 struct scatterlist *sg, int nents);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001393#if 0
Alan Stern5e60a162007-07-30 17:07:21 -04001394void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -03001395 struct scatterlist *sg, int n_hw_ents);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001396#endif
Alan Stern5e60a162007-07-30 17:07:21 -04001397void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
Luiz Fernando N. Capitulino095bc332006-08-26 23:48:11 -03001398 struct scatterlist *sg, int n_hw_ents);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001399
1400/*-------------------------------------------------------------------*
1401 * SYNCHRONOUS CALL SUPPORT *
1402 *-------------------------------------------------------------------*/
1403
1404extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
1405 __u8 request, __u8 requesttype, __u16 value, __u16 index,
1406 void *data, __u16 size, int timeout);
Greg Kroah-Hartman782a7a62006-05-19 13:20:20 -07001407extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
1408 void *data, int len, int *actual_length, int timeout);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001409extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
1410 void *data, int len, int *actual_length,
1411 int timeout);
1412
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413/* wrappers around usb_control_msg() for the most common standard requests */
1414extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
1415 unsigned char descindex, void *buf, int size);
1416extern int usb_get_status(struct usb_device *dev,
1417 int type, int target, void *data);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001418extern int usb_string(struct usb_device *dev, int index,
1419 char *buf, size_t size);
1420
1421/* wrappers that also update important state inside usbcore */
1422extern int usb_clear_halt(struct usb_device *dev, int pipe);
1423extern int usb_reset_configuration(struct usb_device *dev);
1424extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
David Vrabel3444b262009-04-08 17:36:28 +00001425extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001426
Alan Stern088dc272006-08-21 12:08:19 -04001427/* this request isn't really synchronous, but it belongs with the others */
1428extern int usb_driver_set_configuration(struct usb_device *udev, int config);
1429
Linus Torvalds1da177e2005-04-16 15:20:36 -07001430/*
1431 * timeouts, in milliseconds, used for sending/receiving control messages
1432 * they typically complete within a few frames (msec) after they're issued
1433 * USB identifies 5 second timeouts, maybe more in a few cases, and a few
1434 * slow devices (like some MGE Ellipse UPSes) actually push that limit.
1435 */
1436#define USB_CTRL_GET_TIMEOUT 5000
1437#define USB_CTRL_SET_TIMEOUT 5000
1438
1439
1440/**
1441 * struct usb_sg_request - support for scatter/gather I/O
1442 * @status: zero indicates success, else negative errno
1443 * @bytes: counts bytes transferred.
1444 *
1445 * These requests are initialized using usb_sg_init(), and then are used
1446 * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most
1447 * members of the request object aren't for driver access.
1448 *
1449 * The status and bytecount values are valid only after usb_sg_wait()
1450 * returns. If the status is zero, then the bytecount matches the total
1451 * from the request.
1452 *
1453 * After an error completion, drivers may need to clear a halt condition
1454 * on the endpoint.
1455 */
1456struct usb_sg_request {
1457 int status;
1458 size_t bytes;
1459
Randy Dunlapbf92c192009-04-29 21:02:49 -07001460 /* private:
1461 * members below are private to usbcore,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001462 * and are not provided for driver access!
1463 */
1464 spinlock_t lock;
1465
1466 struct usb_device *dev;
1467 int pipe;
1468 struct scatterlist *sg;
1469 int nents;
1470
1471 int entries;
1472 struct urb **urbs;
1473
1474 int count;
1475 struct completion complete;
1476};
1477
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001478int usb_sg_init(
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 struct usb_sg_request *io,
1480 struct usb_device *dev,
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001481 unsigned pipe,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482 unsigned period,
1483 struct scatterlist *sg,
1484 int nents,
1485 size_t length,
Al Viro55016f12005-10-21 03:21:58 -04001486 gfp_t mem_flags
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487);
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001488void usb_sg_cancel(struct usb_sg_request *io);
1489void usb_sg_wait(struct usb_sg_request *io);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001490
1491
Alan Sternb724ae72005-10-24 15:36:00 -04001492/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001493
1494/*
1495 * For various legacy reasons, Linux has a small cookie that's paired with
1496 * a struct usb_device to identify an endpoint queue. Queue characteristics
1497 * are defined by the endpoint's descriptor. This cookie is called a "pipe",
1498 * an unsigned int encoded as:
1499 *
1500 * - direction: bit 7 (0 = Host-to-Device [Out],
1501 * 1 = Device-to-Host [In] ...
1502 * like endpoint bEndpointAddress)
1503 * - device address: bits 8-14 ... bit positions known to uhci-hcd
1504 * - endpoint: bits 15-18 ... bit positions known to uhci-hcd
1505 * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
1506 * 10 = control, 11 = bulk)
1507 *
1508 * Given the device address and endpoint descriptor, pipes are redundant.
1509 */
1510
1511/* NOTE: these are not the standard USB_ENDPOINT_XFER_* values!! */
1512/* (yet ... they're the values used by usbfs) */
1513#define PIPE_ISOCHRONOUS 0
1514#define PIPE_INTERRUPT 1
1515#define PIPE_CONTROL 2
1516#define PIPE_BULK 3
1517
1518#define usb_pipein(pipe) ((pipe) & USB_DIR_IN)
1519#define usb_pipeout(pipe) (!usb_pipein(pipe))
1520
1521#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
1522#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
1523
1524#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
1525#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
1526#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
1527#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
1528#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
1529
Alan Sternb724ae72005-10-24 15:36:00 -04001530static inline unsigned int __create_pipe(struct usb_device *dev,
1531 unsigned int endpoint)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001532{
1533 return (dev->devnum << 8) | (endpoint << 15);
1534}
1535
1536/* Create various pipes... */
Alan Sternb724ae72005-10-24 15:36:00 -04001537#define usb_sndctrlpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001538 ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint))
Alan Sternb724ae72005-10-24 15:36:00 -04001539#define usb_rcvctrlpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001540 ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
Alan Sternb724ae72005-10-24 15:36:00 -04001541#define usb_sndisocpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001542 ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint))
Alan Sternb724ae72005-10-24 15:36:00 -04001543#define usb_rcvisocpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001544 ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
Alan Sternb724ae72005-10-24 15:36:00 -04001545#define usb_sndbulkpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001546 ((PIPE_BULK << 30) | __create_pipe(dev, endpoint))
Alan Sternb724ae72005-10-24 15:36:00 -04001547#define usb_rcvbulkpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001548 ((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
Alan Sternb724ae72005-10-24 15:36:00 -04001549#define usb_sndintpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001550 ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint))
Alan Sternb724ae72005-10-24 15:36:00 -04001551#define usb_rcvintpipe(dev,endpoint) \
Greg Kroah-Hartman969ab2e2008-01-30 15:20:32 -08001552 ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553
1554/*-------------------------------------------------------------------------*/
1555
1556static inline __u16
1557usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
1558{
1559 struct usb_host_endpoint *ep;
1560 unsigned epnum = usb_pipeendpoint(pipe);
1561
1562 if (is_out) {
1563 WARN_ON(usb_pipein(pipe));
1564 ep = udev->ep_out[epnum];
1565 } else {
1566 WARN_ON(usb_pipeout(pipe));
1567 ep = udev->ep_in[epnum];
1568 }
1569 if (!ep)
1570 return 0;
1571
1572 /* NOTE: only 0x07ff bits are for packet size... */
1573 return le16_to_cpu(ep->desc.wMaxPacketSize);
1574}
1575
Alan Sternb724ae72005-10-24 15:36:00 -04001576/* ----------------------------------------------------------------------- */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001577
Greg Kroah-Hartman3099e752005-06-20 21:15:16 -07001578/* Events from the usb core */
1579#define USB_DEVICE_ADD 0x0001
1580#define USB_DEVICE_REMOVE 0x0002
1581#define USB_BUS_ADD 0x0003
1582#define USB_BUS_REMOVE 0x0004
1583extern void usb_register_notify(struct notifier_block *nb);
1584extern void usb_unregister_notify(struct notifier_block *nb);
1585
Linus Torvalds1da177e2005-04-16 15:20:36 -07001586#ifdef DEBUG
Alan Sternb724ae72005-10-24 15:36:00 -04001587#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \
1588 __FILE__ , ## arg)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001589#else
1590#define dbg(format, arg...) do {} while (0)
1591#endif
1592
Tilman Schmidtf66396b2008-03-13 19:51:42 +01001593#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
1594 format "\n" , ## arg)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595
Greg Kroah-Hartman00048b82009-04-24 14:56:26 -07001596/* debugfs stuff */
1597extern struct dentry *usb_debug_root;
1598
Linus Torvalds1da177e2005-04-16 15:20:36 -07001599#endif /* __KERNEL__ */
1600
1601#endif