blob: b45ad312c58732c480e6c5b96fb8a4b722e6f688 [file] [log] [blame]
Lauri Leukkunenffe7f952009-03-23 18:38:17 -07001/*
Amit Kucheria9312fff2009-08-27 20:27:57 +02002 * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
Lauri Leukkunenffe7f952009-03-23 18:38:17 -07003 *
4 * Copyright (C) 2008-2009 Nokia
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14#include <linux/input.h>
15#include <linux/spi/spi.h>
16#include <linux/i2c.h>
17#include <linux/i2c/twl4030.h>
18#include <linux/clk.h>
19#include <linux/delay.h>
20#include <linux/regulator/machine.h>
21#include <linux/gpio.h>
Adrian Hunter5e763d22009-09-22 16:45:05 -070022#include <linux/mmc/host.h>
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070023
24#include <mach/mcspi.h>
25#include <mach/mux.h>
26#include <mach/board.h>
27#include <mach/common.h>
28#include <mach/dma.h>
29#include <mach/gpmc.h>
30#include <mach/keypad.h>
Juha Yrjolaaa62e902009-05-28 13:23:52 -070031#include <mach/onenand.h>
Tony Lindgren1a48e152009-05-28 13:23:52 -070032#include <mach/gpmc-smc91x.h>
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070033
34#include "mmc-twl4030.h"
35
Adrian Hunterf52eeee2009-05-28 14:04:04 -070036#define SYSTEM_REV_B_USES_VAUX3 0x1699
37#define SYSTEM_REV_S_USES_VAUX3 0x8
38
Tony Lindgren4f543332009-09-24 16:23:16 -070039static int board_keymap[] = {
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070040 KEY(0, 0, KEY_Q),
41 KEY(0, 1, KEY_W),
42 KEY(0, 2, KEY_E),
43 KEY(0, 3, KEY_R),
44 KEY(0, 4, KEY_T),
45 KEY(0, 5, KEY_Y),
46 KEY(0, 6, KEY_U),
47 KEY(0, 7, KEY_I),
48 KEY(1, 0, KEY_O),
49 KEY(1, 1, KEY_D),
50 KEY(1, 2, KEY_DOT),
51 KEY(1, 3, KEY_V),
52 KEY(1, 4, KEY_DOWN),
53 KEY(2, 0, KEY_P),
54 KEY(2, 1, KEY_F),
55 KEY(2, 2, KEY_UP),
56 KEY(2, 3, KEY_B),
57 KEY(2, 4, KEY_RIGHT),
58 KEY(3, 0, KEY_COMMA),
59 KEY(3, 1, KEY_G),
60 KEY(3, 2, KEY_ENTER),
61 KEY(3, 3, KEY_N),
62 KEY(4, 0, KEY_BACKSPACE),
63 KEY(4, 1, KEY_H),
64 KEY(4, 3, KEY_M),
65 KEY(4, 4, KEY_LEFTCTRL),
66 KEY(5, 1, KEY_J),
67 KEY(5, 2, KEY_Z),
68 KEY(5, 3, KEY_SPACE),
69 KEY(5, 4, KEY_LEFTSHIFT),
70 KEY(6, 0, KEY_A),
71 KEY(6, 1, KEY_K),
72 KEY(6, 2, KEY_X),
73 KEY(6, 3, KEY_SPACE),
74 KEY(6, 4, KEY_FN),
75 KEY(7, 0, KEY_S),
76 KEY(7, 1, KEY_L),
77 KEY(7, 2, KEY_C),
78 KEY(7, 3, KEY_LEFT),
79 KEY(0xff, 0, KEY_F6),
80 KEY(0xff, 1, KEY_F7),
81 KEY(0xff, 2, KEY_F8),
82 KEY(0xff, 4, KEY_F9),
83 KEY(0xff, 5, KEY_F10),
84};
85
Tony Lindgren4f543332009-09-24 16:23:16 -070086static struct matrix_keymap_data board_map_data = {
87 .keymap = board_keymap,
88 .keymap_size = ARRAY_SIZE(board_keymap),
89};
90
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070091static struct twl4030_keypad_data rx51_kp_data = {
Tony Lindgren4f543332009-09-24 16:23:16 -070092 .keymap_data = &board_map_data,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070093 .rows = 8,
94 .cols = 8,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070095 .rep = 1,
96};
97
Lauri Leukkunenffe7f952009-03-23 18:38:17 -070098static struct twl4030_madc_platform_data rx51_madc_data = {
99 .irq_line = 1,
100};
101
102static struct twl4030_hsmmc_info mmc[] = {
103 {
104 .name = "external",
105 .mmc = 1,
106 .wires = 4,
107 .cover_only = true,
108 .gpio_cd = 160,
109 .gpio_wp = -EINVAL,
Adrian Hunter5e763d22009-09-22 16:45:05 -0700110 .power_saving = true,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700111 },
112 {
113 .name = "internal",
114 .mmc = 2,
115 .wires = 8,
116 .gpio_cd = -EINVAL,
117 .gpio_wp = -EINVAL,
Adrian Hunter5e763d22009-09-22 16:45:05 -0700118 .nonremovable = true,
119 .power_saving = true,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700120 },
121 {} /* Terminator */
122};
123
124static struct regulator_consumer_supply rx51_vmmc1_supply = {
125 .supply = "vmmc",
126};
127
128static struct regulator_consumer_supply rx51_vmmc2_supply = {
129 .supply = "vmmc",
130};
131
132static struct regulator_consumer_supply rx51_vsim_supply = {
133 .supply = "vmmc_aux",
134};
135
136static struct regulator_init_data rx51_vaux1 = {
137 .constraints = {
138 .name = "V28",
139 .min_uV = 2800000,
140 .max_uV = 2800000,
141 .valid_modes_mask = REGULATOR_MODE_NORMAL
142 | REGULATOR_MODE_STANDBY,
143 .valid_ops_mask = REGULATOR_CHANGE_MODE
144 | REGULATOR_CHANGE_STATUS,
145 },
146};
147
148static struct regulator_init_data rx51_vaux2 = {
149 .constraints = {
150 .name = "VCSI",
151 .min_uV = 1800000,
152 .max_uV = 1800000,
153 .valid_modes_mask = REGULATOR_MODE_NORMAL
154 | REGULATOR_MODE_STANDBY,
155 .valid_ops_mask = REGULATOR_CHANGE_MODE
156 | REGULATOR_CHANGE_STATUS,
157 },
158};
159
160/* VAUX3 - adds more power to VIO_18 rail */
Adrian Hunterf52eeee2009-05-28 14:04:04 -0700161static struct regulator_init_data rx51_vaux3_cam = {
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700162 .constraints = {
163 .name = "VCAM_DIG_18",
164 .min_uV = 1800000,
165 .max_uV = 1800000,
166 .apply_uV = true,
167 .valid_modes_mask = REGULATOR_MODE_NORMAL
168 | REGULATOR_MODE_STANDBY,
169 .valid_ops_mask = REGULATOR_CHANGE_MODE
170 | REGULATOR_CHANGE_STATUS,
171 },
172};
173
Adrian Hunterf52eeee2009-05-28 14:04:04 -0700174static struct regulator_init_data rx51_vaux3_mmc = {
175 .constraints = {
176 .name = "VMMC2_30",
177 .min_uV = 2800000,
178 .max_uV = 3000000,
179 .apply_uV = true,
180 .valid_modes_mask = REGULATOR_MODE_NORMAL
181 | REGULATOR_MODE_STANDBY,
182 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
183 | REGULATOR_CHANGE_MODE
184 | REGULATOR_CHANGE_STATUS,
185 },
186 .num_consumer_supplies = 1,
187 .consumer_supplies = &rx51_vmmc2_supply,
188};
189
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700190static struct regulator_init_data rx51_vaux4 = {
191 .constraints = {
192 .name = "VCAM_ANA_28",
193 .min_uV = 2800000,
194 .max_uV = 2800000,
195 .apply_uV = true,
196 .valid_modes_mask = REGULATOR_MODE_NORMAL
197 | REGULATOR_MODE_STANDBY,
198 .valid_ops_mask = REGULATOR_CHANGE_MODE
199 | REGULATOR_CHANGE_STATUS,
200 },
201};
202
203static struct regulator_init_data rx51_vmmc1 = {
204 .constraints = {
205 .min_uV = 1850000,
206 .max_uV = 3150000,
207 .valid_modes_mask = REGULATOR_MODE_NORMAL
208 | REGULATOR_MODE_STANDBY,
209 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
210 | REGULATOR_CHANGE_MODE
211 | REGULATOR_CHANGE_STATUS,
212 },
213 .num_consumer_supplies = 1,
214 .consumer_supplies = &rx51_vmmc1_supply,
215};
216
217static struct regulator_init_data rx51_vmmc2 = {
218 .constraints = {
219 .name = "VMMC2_30",
220 .min_uV = 1850000,
221 .max_uV = 3150000,
222 .apply_uV = true,
223 .valid_modes_mask = REGULATOR_MODE_NORMAL
224 | REGULATOR_MODE_STANDBY,
225 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
226 | REGULATOR_CHANGE_MODE
227 | REGULATOR_CHANGE_STATUS,
228 },
229 .num_consumer_supplies = 1,
230 .consumer_supplies = &rx51_vmmc2_supply,
231};
232
233static struct regulator_init_data rx51_vsim = {
234 .constraints = {
235 .name = "VMMC2_IO_18",
236 .min_uV = 1800000,
237 .max_uV = 1800000,
238 .apply_uV = true,
239 .valid_modes_mask = REGULATOR_MODE_NORMAL
240 | REGULATOR_MODE_STANDBY,
241 .valid_ops_mask = REGULATOR_CHANGE_MODE
242 | REGULATOR_CHANGE_STATUS,
243 },
244 .num_consumer_supplies = 1,
245 .consumer_supplies = &rx51_vsim_supply,
246};
247
248static struct regulator_init_data rx51_vdac = {
249 .constraints = {
250 .min_uV = 1800000,
251 .max_uV = 1800000,
252 .valid_modes_mask = REGULATOR_MODE_NORMAL
253 | REGULATOR_MODE_STANDBY,
254 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
255 | REGULATOR_CHANGE_MODE
256 | REGULATOR_CHANGE_STATUS,
257 },
258};
259
260static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
261{
262 /* FIXME this gpio setup is just a placeholder for now */
263 gpio_request(gpio + 6, "backlight_pwm");
264 gpio_direction_output(gpio + 6, 0);
265 gpio_request(gpio + 7, "speaker_en");
266 gpio_direction_output(gpio + 7, 1);
267
268 /* set up MMC adapters, linking their regulators to them */
269 twl4030_mmc_init(mmc);
270 rx51_vmmc1_supply.dev = mmc[0].dev;
271 rx51_vmmc2_supply.dev = mmc[1].dev;
272 rx51_vsim_supply.dev = mmc[1].dev;
273
274 return 0;
275}
276
277static struct twl4030_gpio_platform_data rx51_gpio_data = {
278 .gpio_base = OMAP_MAX_GPIO_LINES,
279 .irq_base = TWL4030_GPIO_IRQ_BASE,
280 .irq_end = TWL4030_GPIO_IRQ_END,
281 .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
282 | BIT(4) | BIT(5)
283 | BIT(8) | BIT(9) | BIT(10) | BIT(11)
284 | BIT(12) | BIT(13) | BIT(14) | BIT(15)
285 | BIT(16) | BIT(17) ,
286 .setup = rx51_twlgpio_setup,
287};
288
Roger Quadrosdfc27b32009-08-10 14:49:51 +0300289static struct twl4030_usb_data rx51_usb_data = {
290 .usb_mode = T2_USB_MODE_ULPI,
291};
292
Amit Kucheria9312fff2009-08-27 20:27:57 +0200293static struct twl4030_ins sleep_on_seq[] __initdata = {
294/*
295 * Turn off VDD1 and VDD2.
296 */
297 {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
298 {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
299/*
300 * And also turn off the OMAP3 PLLs and the sysclk output.
301 */
302 {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
303 {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
304};
305
306static struct twl4030_script sleep_on_script __initdata = {
307 .script = sleep_on_seq,
308 .size = ARRAY_SIZE(sleep_on_seq),
309 .flags = TWL4030_SLEEP_SCRIPT,
310};
311
312static struct twl4030_ins wakeup_seq[] __initdata = {
313/*
314 * Reenable the OMAP3 PLLs.
315 * Wakeup VDD1 and VDD2.
316 * Reenable sysclk output.
317 */
318 {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
319 {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
320 {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
321 {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
322};
323
324static struct twl4030_script wakeup_script __initdata = {
325 .script = wakeup_seq,
326 .size = ARRAY_SIZE(wakeup_seq),
327 .flags = TWL4030_WAKEUP12_SCRIPT,
328};
329
330static struct twl4030_ins wakeup_p3_seq[] __initdata = {
331/*
332 * Wakeup VDD1 (dummy to be able to insert a delay)
333 * Enable CLKEN
334 */
335 {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
336};
337
338static struct twl4030_script wakeup_p3_script __initdata = {
339 .script = wakeup_p3_seq,
340 .size = ARRAY_SIZE(wakeup_p3_seq),
341 .flags = TWL4030_WAKEUP3_SCRIPT,
342};
343
344static struct twl4030_ins wrst_seq[] __initdata = {
345/*
346 * Reset twl4030.
347 * Reset VDD1 regulator.
348 * Reset VDD2 regulator.
349 * Reset VPLL1 regulator.
350 * Enable sysclk output.
351 * Reenable twl4030.
352 */
353 {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
354 {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
355 0x13},
356 {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
357 {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
358 {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
359 {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
360 {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
361 {MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
362 {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
363};
364
365static struct twl4030_script wrst_script __initdata = {
366 .script = wrst_seq,
367 .size = ARRAY_SIZE(wrst_seq),
368 .flags = TWL4030_WRST_SCRIPT,
369};
370
371static struct twl4030_script *twl4030_scripts[] __initdata = {
372 /* wakeup12 script should be loaded before sleep script, otherwise a
373 board might hit retention before loading of wakeup script is
374 completed. This can cause boot failures depending on timing issues.
375 */
376 &wakeup_script,
377 &sleep_on_script,
378 &wakeup_p3_script,
379 &wrst_script,
380};
381
382static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
383 { .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
384 { .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
385 { .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
386 { .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
387 { .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
388 .type2 = 3},
389 { .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
390 { .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
391 { .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
392 { .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
393 { .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
394 { .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
395 { .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
396 .type2 = 3},
397 { .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
398 .type2 = 1 },
399 { 0, 0},
400};
401
402static struct twl4030_power_data rx51_t2scripts_data __initdata = {
403 .scripts = twl4030_scripts,
404 .num = ARRAY_SIZE(twl4030_scripts),
405 .resource_config = twl4030_rconfig,
406};
407
408
409
410static struct twl4030_platform_data rx51_twldata __initdata = {
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700411 .irq_base = TWL4030_IRQ_BASE,
412 .irq_end = TWL4030_IRQ_END,
413
414 /* platform_data for children goes here */
415 .gpio = &rx51_gpio_data,
416 .keypad = &rx51_kp_data,
417 .madc = &rx51_madc_data,
Roger Quadrosdfc27b32009-08-10 14:49:51 +0300418 .usb = &rx51_usb_data,
Amit Kucheria9312fff2009-08-27 20:27:57 +0200419 .power = &rx51_t2scripts_data,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700420
421 .vaux1 = &rx51_vaux1,
422 .vaux2 = &rx51_vaux2,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700423 .vaux4 = &rx51_vaux4,
424 .vmmc1 = &rx51_vmmc1,
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700425 .vsim = &rx51_vsim,
426 .vdac = &rx51_vdac,
427};
428
429static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
430 {
431 I2C_BOARD_INFO("twl5030", 0x48),
432 .flags = I2C_CLIENT_WAKE,
433 .irq = INT_34XX_SYS_NIRQ,
434 .platform_data = &rx51_twldata,
435 },
436};
437
438static int __init rx51_i2c_init(void)
439{
Adrian Hunterf52eeee2009-05-28 14:04:04 -0700440 if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
441 system_rev >= SYSTEM_REV_B_USES_VAUX3)
442 rx51_twldata.vaux3 = &rx51_vaux3_mmc;
443 else {
444 rx51_twldata.vaux3 = &rx51_vaux3_cam;
445 rx51_twldata.vmmc2 = &rx51_vmmc2;
446 }
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700447 omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
448 ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
449 omap_register_i2c_bus(2, 100, NULL, 0);
450 omap_register_i2c_bus(3, 400, NULL, 0);
451 return 0;
452}
453
Juha Yrjolaaa62e902009-05-28 13:23:52 -0700454#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
455 defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
456
457static struct mtd_partition onenand_partitions[] = {
458 {
459 .name = "bootloader",
460 .offset = 0,
461 .size = 0x20000,
462 .mask_flags = MTD_WRITEABLE, /* Force read-only */
463 },
464 {
465 .name = "config",
466 .offset = MTDPART_OFS_APPEND,
467 .size = 0x60000,
468 },
469 {
470 .name = "log",
471 .offset = MTDPART_OFS_APPEND,
472 .size = 0x40000,
473 },
474 {
475 .name = "kernel",
476 .offset = MTDPART_OFS_APPEND,
477 .size = 0x200000,
478 },
479 {
480 .name = "initfs",
481 .offset = MTDPART_OFS_APPEND,
482 .size = 0x200000,
483 },
484 {
485 .name = "rootfs",
486 .offset = MTDPART_OFS_APPEND,
487 .size = MTDPART_SIZ_FULL,
488 },
489};
490
491static struct omap_onenand_platform_data board_onenand_data = {
492 .cs = 0,
493 .gpio_irq = 65,
494 .parts = onenand_partitions,
495 .nr_parts = ARRAY_SIZE(onenand_partitions),
Adrian Hunterc8e64882009-06-23 13:30:25 +0300496 .flags = ONENAND_SYNC_READWRITE,
Juha Yrjolaaa62e902009-05-28 13:23:52 -0700497};
498
499static void __init board_onenand_init(void)
500{
501 gpmc_onenand_init(&board_onenand_data);
502}
503
504#else
505
506static inline void board_onenand_init(void)
507{
508}
509
510#endif
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700511
Tony Lindgren1a48e152009-05-28 13:23:52 -0700512#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
513
514static struct omap_smc91x_platform_data board_smc91x_data = {
515 .cs = 1,
516 .gpio_irq = 54,
517 .gpio_pwrdwn = 86,
518 .gpio_reset = 164,
519 .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
520};
521
522static void __init board_smc91x_init(void)
523{
524 omap_cfg_reg(U8_34XX_GPIO54_DOWN);
525 omap_cfg_reg(G25_34XX_GPIO86_OUT);
526 omap_cfg_reg(H19_34XX_GPIO164_OUT);
527
528 gpmc_smc91x_init(&board_smc91x_data);
529}
530
531#else
532
533static inline void board_smc91x_init(void)
534{
535}
536
537#endif
538
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700539void __init rx51_peripherals_init(void)
540{
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700541 rx51_i2c_init();
Juha Yrjolaaa62e902009-05-28 13:23:52 -0700542 board_onenand_init();
Tony Lindgren1a48e152009-05-28 13:23:52 -0700543 board_smc91x_init();
Lauri Leukkunenffe7f952009-03-23 18:38:17 -0700544}
545