blob: ae334b067c13e873a2105497cf38a673a5f65f57 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#include <linux/module.h>
2#include <linux/string.h>
3#include <linux/bitops.h>
4#include <linux/slab.h>
5#include <linux/init.h>
Alan Sternd617bc82007-08-02 15:04:52 -04006#include <linux/log2.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -07007#include <linux/usb.h>
Oliver Neukum51a2f072007-05-25 13:40:56 +02008#include <linux/wait.h>
Eric Lescouet27729aa2010-04-24 23:21:52 +02009#include <linux/usb/hcd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070010
11#define to_urb(d) container_of(d, struct urb, kref)
12
Oliver Neukum6a2839b2008-07-29 16:18:47 +020013
Linus Torvalds1da177e2005-04-16 15:20:36 -070014static void urb_destroy(struct kref *kref)
15{
16 struct urb *urb = to_urb(kref);
Oliver Neukum51a2f072007-05-25 13:40:56 +020017
Marcel Holtmann8b3b01c2007-06-13 08:02:11 +020018 if (urb->transfer_flags & URB_FREE_BUFFER)
19 kfree(urb->transfer_buffer);
20
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 kfree(urb);
22}
23
24/**
25 * usb_init_urb - initializes a urb so that it can be used by a USB driver
26 * @urb: pointer to the urb to initialize
27 *
28 * Initializes a urb so that the USB subsystem can use it properly.
29 *
30 * If a urb is created with a call to usb_alloc_urb() it is not
31 * necessary to call this function. Only use this if you allocate the
32 * space for a struct urb on your own. If you call this function, be
33 * careful when freeing the memory for your urb that it is no longer in
34 * use by the USB core.
35 *
36 * Only use this function if you _really_ understand what you are doing.
37 */
38void usb_init_urb(struct urb *urb)
39{
40 if (urb) {
41 memset(urb, 0, sizeof(*urb));
42 kref_init(&urb->kref);
Oliver Neukum51a2f072007-05-25 13:40:56 +020043 INIT_LIST_HEAD(&urb->anchor_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -070044 }
45}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -060046EXPORT_SYMBOL_GPL(usb_init_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -070047
48/**
49 * usb_alloc_urb - creates a new urb for a USB driver to use
50 * @iso_packets: number of iso packets for this urb
51 * @mem_flags: the type of memory to allocate, see kmalloc() for a list of
52 * valid options for this.
53 *
54 * Creates an urb for the USB driver to use, initializes a few internal
55 * structures, incrementes the usage counter, and returns a pointer to it.
56 *
57 * If no memory is available, NULL is returned.
58 *
59 * If the driver want to use this urb for interrupt, control, or bulk
60 * endpoints, pass '0' as the number of iso packets.
61 *
62 * The driver must call usb_free_urb() when it is finished with the urb.
63 */
Al Viro55016f12005-10-21 03:21:58 -040064struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
Linus Torvalds1da177e2005-04-16 15:20:36 -070065{
66 struct urb *urb;
67
Tobias Klauserec17cf12006-09-13 21:38:41 +020068 urb = kmalloc(sizeof(struct urb) +
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 iso_packets * sizeof(struct usb_iso_packet_descriptor),
70 mem_flags);
71 if (!urb) {
Greg Kroah-Hartman69a85942008-08-14 09:37:34 -070072 printk(KERN_ERR "alloc_urb: kmalloc failed\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -070073 return NULL;
74 }
75 usb_init_urb(urb);
76 return urb;
77}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -060078EXPORT_SYMBOL_GPL(usb_alloc_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -070079
80/**
81 * usb_free_urb - frees the memory used by a urb when all users of it are finished
82 * @urb: pointer to the urb to free, may be NULL
83 *
84 * Must be called when a user of a urb is finished with it. When the last user
85 * of the urb calls this function, the memory of the urb is freed.
86 *
Rabin Vincent2870fde2008-11-09 11:40:30 +053087 * Note: The transfer buffer associated with the urb is not freed unless the
88 * URB_FREE_BUFFER transfer flag is set.
Linus Torvalds1da177e2005-04-16 15:20:36 -070089 */
90void usb_free_urb(struct urb *urb)
91{
92 if (urb)
93 kref_put(&urb->kref, urb_destroy);
94}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -060095EXPORT_SYMBOL_GPL(usb_free_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -070096
97/**
98 * usb_get_urb - increments the reference count of the urb
99 * @urb: pointer to the urb to modify, may be NULL
100 *
101 * This must be called whenever a urb is transferred from a device driver to a
102 * host controller driver. This allows proper reference counting to happen
103 * for urbs.
104 *
105 * A pointer to the urb with the incremented reference counter is returned.
106 */
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800107struct urb *usb_get_urb(struct urb *urb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108{
109 if (urb)
110 kref_get(&urb->kref);
111 return urb;
112}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -0600113EXPORT_SYMBOL_GPL(usb_get_urb);
Oliver Neukum51a2f072007-05-25 13:40:56 +0200114
115/**
116 * usb_anchor_urb - anchors an URB while it is processed
117 * @urb: pointer to the urb to anchor
118 * @anchor: pointer to the anchor
119 *
120 * This can be called to have access to URBs which are to be executed
121 * without bothering to track them
122 */
123void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
124{
125 unsigned long flags;
126
127 spin_lock_irqsave(&anchor->lock, flags);
128 usb_get_urb(urb);
129 list_add_tail(&urb->anchor_list, &anchor->urb_list);
130 urb->anchor = anchor;
Oliver Neukum6a2839b2008-07-29 16:18:47 +0200131
132 if (unlikely(anchor->poisoned)) {
Ming Lei49367d82008-12-12 21:38:45 +0800133 atomic_inc(&urb->reject);
Oliver Neukum6a2839b2008-07-29 16:18:47 +0200134 }
135
Oliver Neukum51a2f072007-05-25 13:40:56 +0200136 spin_unlock_irqrestore(&anchor->lock, flags);
137}
138EXPORT_SYMBOL_GPL(usb_anchor_urb);
139
Christian Lamparterb3e67042010-08-03 02:32:28 +0200140/* Callers must hold anchor->lock */
141static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
142{
143 urb->anchor = NULL;
144 list_del(&urb->anchor_list);
145 usb_put_urb(urb);
146 if (list_empty(&anchor->urb_list))
147 wake_up(&anchor->wait);
148}
149
Oliver Neukum51a2f072007-05-25 13:40:56 +0200150/**
151 * usb_unanchor_urb - unanchors an URB
152 * @urb: pointer to the urb to anchor
153 *
154 * Call this to stop the system keeping track of this URB
155 */
156void usb_unanchor_urb(struct urb *urb)
157{
158 unsigned long flags;
159 struct usb_anchor *anchor;
160
161 if (!urb)
162 return;
163
164 anchor = urb->anchor;
165 if (!anchor)
166 return;
167
168 spin_lock_irqsave(&anchor->lock, flags);
Christian Lamparterb3e67042010-08-03 02:32:28 +0200169 /*
170 * At this point, we could be competing with another thread which
171 * has the same intention. To protect the urb from being unanchored
172 * twice, only the winner of the race gets the job.
173 */
174 if (likely(anchor == urb->anchor))
175 __usb_unanchor_urb(urb, anchor);
Oliver Neukum51a2f072007-05-25 13:40:56 +0200176 spin_unlock_irqrestore(&anchor->lock, flags);
Oliver Neukum51a2f072007-05-25 13:40:56 +0200177}
178EXPORT_SYMBOL_GPL(usb_unanchor_urb);
179
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180/*-------------------------------------------------------------------*/
181
182/**
183 * usb_submit_urb - issue an asynchronous transfer request for an endpoint
184 * @urb: pointer to the urb describing the request
185 * @mem_flags: the type of memory to allocate, see kmalloc() for a list
186 * of valid options for this.
187 *
188 * This submits a transfer request, and transfers control of the URB
189 * describing that request to the USB subsystem. Request completion will
190 * be indicated later, asynchronously, by calling the completion handler.
191 * The three types of completion are success, error, and unlink
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800192 * (a software-induced fault, also called "request cancellation").
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193 *
194 * URBs may be submitted in interrupt context.
195 *
196 * The caller must have correctly initialized the URB before submitting
197 * it. Functions such as usb_fill_bulk_urb() and usb_fill_control_urb() are
198 * available to ensure that most fields are correctly initialized, for
199 * the particular kind of transfer, although they will not initialize
200 * any transfer flags.
201 *
202 * Successful submissions return 0; otherwise this routine returns a
203 * negative error number. If the submission is successful, the complete()
204 * callback from the URB will be called exactly once, when the USB core and
205 * Host Controller Driver (HCD) are finished with the URB. When the completion
206 * function is called, control of the URB is returned to the device
207 * driver which issued the request. The completion handler may then
208 * immediately free or reuse that URB.
209 *
210 * With few exceptions, USB device drivers should never access URB fields
211 * provided by usbcore or the HCD until its complete() is called.
212 * The exceptions relate to periodic transfer scheduling. For both
213 * interrupt and isochronous urbs, as part of successful URB submission
214 * urb->interval is modified to reflect the actual transfer period used
215 * (normally some power of two units). And for isochronous urbs,
216 * urb->start_frame is modified to reflect when the URB's transfers were
217 * scheduled to start. Not all isochronous transfer scheduling policies
218 * will work, but most host controller drivers should easily handle ISO
219 * queues going from now until 10-200 msec into the future.
220 *
221 * For control endpoints, the synchronous usb_control_msg() call is
222 * often used (in non-interrupt context) instead of this call.
223 * That is often used through convenience wrappers, for the requests
224 * that are standardized in the USB 2.0 specification. For bulk
225 * endpoints, a synchronous usb_bulk_msg() call is available.
226 *
227 * Request Queuing:
228 *
229 * URBs may be submitted to endpoints before previous ones complete, to
230 * minimize the impact of interrupt latencies and system overhead on data
231 * throughput. With that queuing policy, an endpoint's queue would never
232 * be empty. This is required for continuous isochronous data streams,
233 * and may also be required for some kinds of interrupt transfers. Such
234 * queuing also maximizes bandwidth utilization by letting USB controllers
235 * start work on later requests before driver software has finished the
236 * completion processing for earlier (successful) requests.
237 *
238 * As of Linux 2.6, all USB endpoint transfer queues support depths greater
239 * than one. This was previously a HCD-specific behavior, except for ISO
240 * transfers. Non-isochronous endpoint queues are inactive during cleanup
Steven Cole093cf722005-05-03 19:07:24 -0600241 * after faults (transfer errors or cancellation).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 *
243 * Reserved Bandwidth Transfers:
244 *
245 * Periodic transfers (interrupt or isochronous) are performed repeatedly,
246 * using the interval specified in the urb. Submitting the first urb to
247 * the endpoint reserves the bandwidth necessary to make those transfers.
248 * If the USB subsystem can't allocate sufficient bandwidth to perform
249 * the periodic request, submitting such a periodic request should fail.
250 *
Sarah Sharp79abb1a2009-04-27 19:58:26 -0700251 * For devices under xHCI, the bandwidth is reserved at configuration time, or
252 * when the alt setting is selected. If there is not enough bus bandwidth, the
253 * configuration/alt setting request will fail. Therefore, submissions to
254 * periodic endpoints on devices under xHCI should never fail due to bandwidth
255 * constraints.
256 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257 * Device drivers must explicitly request that repetition, by ensuring that
258 * some URB is always on the endpoint's queue (except possibly for short
259 * periods during completion callacks). When there is no longer an urb
260 * queued, the endpoint's bandwidth reservation is canceled. This means
261 * drivers can use their completion handlers to ensure they keep bandwidth
262 * they need, by reinitializing and resubmitting the just-completed urb
263 * until the driver longer needs that periodic bandwidth.
264 *
265 * Memory Flags:
266 *
267 * The general rules for how to decide which mem_flags to use
268 * are the same as for kmalloc. There are four
269 * different possible values; GFP_KERNEL, GFP_NOFS, GFP_NOIO and
270 * GFP_ATOMIC.
271 *
272 * GFP_NOFS is not ever used, as it has not been implemented yet.
273 *
274 * GFP_ATOMIC is used when
275 * (a) you are inside a completion handler, an interrupt, bottom half,
276 * tasklet or timer, or
277 * (b) you are holding a spinlock or rwlock (does not apply to
278 * semaphores), or
279 * (c) current->state != TASK_RUNNING, this is the case only after
280 * you've changed it.
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800281 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282 * GFP_NOIO is used in the block io path and error handling of storage
283 * devices.
284 *
285 * All other situations use GFP_KERNEL.
286 *
287 * Some more specific rules for mem_flags can be inferred, such as
288 * (1) start_xmit, timeout, and receive methods of network drivers must
289 * use GFP_ATOMIC (they are called with a spinlock held);
290 * (2) queuecommand methods of scsi drivers must use GFP_ATOMIC (also
291 * called with a spinlock held);
292 * (3) If you use a kernel thread with a network driver you must use
293 * GFP_NOIO, unless (b) or (c) apply;
294 * (4) after you have done a down() you can use GFP_KERNEL, unless (b) or (c)
295 * apply or your are in a storage driver's block io path;
296 * (5) USB probe and disconnect can use GFP_KERNEL unless (b) or (c) apply; and
297 * (6) changing firmware on a running storage or net device uses
298 * GFP_NOIO, unless b) or c) apply
299 *
300 */
Al Viro55016f12005-10-21 03:21:58 -0400301int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302{
Alan Stern5b653c72007-07-30 17:04:37 -0400303 int xfertype, max;
304 struct usb_device *dev;
305 struct usb_host_endpoint *ep;
306 int is_out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
308 if (!urb || urb->hcpriv || !urb->complete)
309 return -EINVAL;
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800310 dev = urb->dev;
David Vrabel6da9c992009-02-18 14:43:47 +0000311 if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313
Alan Stern5b653c72007-07-30 17:04:37 -0400314 /* For now, get the endpoint from the pipe. Eventually drivers
315 * will be required to set urb->ep directly and we will eliminate
316 * urb->pipe.
317 */
Matthew Wilcoxfe54b052010-04-30 13:11:29 -0600318 ep = usb_pipe_endpoint(dev, urb->pipe);
Alan Stern5b653c72007-07-30 17:04:37 -0400319 if (!ep)
320 return -ENOENT;
321
322 urb->ep = ep;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323 urb->status = -EINPROGRESS;
324 urb->actual_length = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325
326 /* Lots of sanity checks, so HCDs can rely on clean data
327 * and don't need to duplicate tests
328 */
Alan Stern5b653c72007-07-30 17:04:37 -0400329 xfertype = usb_endpoint_type(&ep->desc);
Alan Sternfea34092007-07-30 17:06:16 -0400330 if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
331 struct usb_ctrlrequest *setup =
332 (struct usb_ctrlrequest *) urb->setup_packet;
333
334 if (!setup)
335 return -ENOEXEC;
336 is_out = !(setup->bRequestType & USB_DIR_IN) ||
337 !setup->wLength;
338 } else {
339 is_out = usb_endpoint_dir_out(&ep->desc);
340 }
341
Alan Sternff9c8952010-04-02 13:27:28 -0400342 /* Clear the internal flags and cache the direction for later use */
343 urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE |
344 URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL |
345 URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
346 URB_DMA_SG_COMBINED);
347 urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348
Alan Stern5b653c72007-07-30 17:04:37 -0400349 if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
350 dev->state < USB_STATE_CONFIGURED)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 return -ENODEV;
352
Alan Stern5b653c72007-07-30 17:04:37 -0400353 max = le16_to_cpu(ep->desc.wMaxPacketSize);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700354 if (max <= 0) {
355 dev_dbg(&dev->dev,
356 "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
Alan Stern5b653c72007-07-30 17:04:37 -0400357 usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
Harvey Harrison441b62c2008-03-03 16:08:34 -0800358 __func__, max);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700359 return -EMSGSIZE;
360 }
361
362 /* periodic transfers limit size per frame/uframe,
363 * but drivers only control those sizes for ISO.
364 * while we're checking, initialize return status.
365 */
Alan Stern5b653c72007-07-30 17:04:37 -0400366 if (xfertype == USB_ENDPOINT_XFER_ISOC) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700367 int n, len;
368
Paul Zimmerman500132a2011-02-28 18:11:27 -0800369 /* SuperSpeed isoc endpoints have up to 16 bursts of up to
370 * 3 packets each
371 */
372 if (dev->speed == USB_SPEED_SUPER) {
373 int burst = 1 + ep->ss_ep_comp.bMaxBurst;
374 int mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
375 max *= burst;
376 max *= mult;
377 }
378
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379 /* "high bandwidth" mode, 1-3 packets/uframe? */
380 if (dev->speed == USB_SPEED_HIGH) {
381 int mult = 1 + ((max >> 11) & 0x03);
382 max &= 0x07ff;
383 max *= mult;
384 }
385
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800386 if (urb->number_of_packets <= 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387 return -EINVAL;
388 for (n = 0; n < urb->number_of_packets; n++) {
Oliver Neukum92516442007-01-23 15:55:28 -0500389 len = urb->iso_frame_desc[n].length;
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800390 if (len < 0 || len > max)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391 return -EMSGSIZE;
Oliver Neukum92516442007-01-23 15:55:28 -0500392 urb->iso_frame_desc[n].status = -EXDEV;
393 urb->iso_frame_desc[n].actual_length = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700394 }
395 }
396
397 /* the I/O buffer must be mapped/unmapped, except when length=0 */
Roel Kluin71d27182009-03-13 12:19:18 +0100398 if (urb->transfer_buffer_length > INT_MAX)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399 return -EMSGSIZE;
400
401#ifdef DEBUG
402 /* stuff that drivers shouldn't do, but which shouldn't
403 * cause problems in HCDs if they get it wrong.
404 */
405 {
406 unsigned int orig_flags = urb->transfer_flags;
407 unsigned int allowed;
Alan Sternf661c6f2009-12-11 16:20:20 -0500408 static int pipetypes[4] = {
409 PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
410 };
411
412 /* Check that the pipe's type matches the endpoint's type */
Simon Arlottf7dd6492010-08-30 22:50:20 +0100413 if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) {
414 dev_err(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
415 usb_pipetype(urb->pipe), pipetypes[xfertype]);
Alan Sternf661c6f2009-12-11 16:20:20 -0500416 return -EPIPE; /* The most suitable error code :-) */
Simon Arlottf7dd6492010-08-30 22:50:20 +0100417 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418
419 /* enforce simple/standard policy */
Alan Stern0ede76f2010-03-05 15:10:17 -0500420 allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
421 URB_FREE_BUFFER);
Alan Stern5b653c72007-07-30 17:04:37 -0400422 switch (xfertype) {
423 case USB_ENDPOINT_XFER_BULK:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 if (is_out)
425 allowed |= URB_ZERO_PACKET;
426 /* FALLTHROUGH */
Alan Stern5b653c72007-07-30 17:04:37 -0400427 case USB_ENDPOINT_XFER_CONTROL:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428 allowed |= URB_NO_FSBR; /* only affects UHCI */
429 /* FALLTHROUGH */
430 default: /* all non-iso endpoints */
431 if (!is_out)
432 allowed |= URB_SHORT_NOT_OK;
433 break;
Alan Stern5b653c72007-07-30 17:04:37 -0400434 case USB_ENDPOINT_XFER_ISOC:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 allowed |= URB_ISO_ASAP;
436 break;
437 }
438 urb->transfer_flags &= allowed;
439
440 /* fail if submitter gave bogus flags */
441 if (urb->transfer_flags != orig_flags) {
Greg Kroah-Hartman69a85942008-08-14 09:37:34 -0700442 dev_err(&dev->dev, "BOGUS urb flags, %x --> %x\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443 orig_flags, urb->transfer_flags);
444 return -EINVAL;
445 }
446 }
447#endif
448 /*
449 * Force periodic transfer intervals to be legal values that are
450 * a power of two (so HCDs don't need to).
451 *
452 * FIXME want bus->{intr,iso}_sched_horizon values here. Each HC
453 * supports different values... this uses EHCI/UHCI defaults (and
454 * EHCI can use smaller non-default values).
455 */
Alan Stern5b653c72007-07-30 17:04:37 -0400456 switch (xfertype) {
457 case USB_ENDPOINT_XFER_ISOC:
458 case USB_ENDPOINT_XFER_INT:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459 /* too small? */
David Vrabel8e08b972009-08-18 16:11:24 +0100460 switch (dev->speed) {
Greg Kroah-Hartman551cdbb2010-01-14 11:08:04 -0800461 case USB_SPEED_WIRELESS:
David Vrabel8e08b972009-08-18 16:11:24 +0100462 if (urb->interval < 6)
463 return -EINVAL;
464 break;
465 default:
466 if (urb->interval <= 0)
467 return -EINVAL;
468 break;
469 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700470 /* too big? */
471 switch (dev->speed) {
Sarah Sharp6b403b02009-04-27 19:54:10 -0700472 case USB_SPEED_SUPER: /* units are 125us */
473 /* Handle up to 2^(16-1) microframes */
474 if (urb->interval > (1 << 15))
475 return -EINVAL;
476 max = 1 << 15;
Matthew Wilcoxf09a15e2010-03-16 12:55:44 -0700477 break;
Greg Kroah-Hartman551cdbb2010-01-14 11:08:04 -0800478 case USB_SPEED_WIRELESS:
David Vrabel8e08b972009-08-18 16:11:24 +0100479 if (urb->interval > 16)
480 return -EINVAL;
481 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482 case USB_SPEED_HIGH: /* units are microframes */
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800483 /* NOTE usb handles 2^15 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700484 if (urb->interval > (1024 * 8))
485 urb->interval = 1024 * 8;
Alan Stern5b653c72007-07-30 17:04:37 -0400486 max = 1024 * 8;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 break;
488 case USB_SPEED_FULL: /* units are frames/msec */
489 case USB_SPEED_LOW:
Alan Stern5b653c72007-07-30 17:04:37 -0400490 if (xfertype == USB_ENDPOINT_XFER_INT) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700491 if (urb->interval > 255)
492 return -EINVAL;
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800493 /* NOTE ohci only handles up to 32 */
Alan Stern5b653c72007-07-30 17:04:37 -0400494 max = 128;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 } else {
496 if (urb->interval > 1024)
497 urb->interval = 1024;
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800498 /* NOTE usb and ohci handle up to 2^15 */
Alan Stern5b653c72007-07-30 17:04:37 -0400499 max = 1024;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500 }
501 break;
502 default:
503 return -EINVAL;
504 }
Greg Kroah-Hartman551cdbb2010-01-14 11:08:04 -0800505 if (dev->speed != USB_SPEED_WIRELESS) {
David Vrabel8e08b972009-08-18 16:11:24 +0100506 /* Round down to a power of 2, no more than max */
507 urb->interval = min(max, 1 << ilog2(urb->interval));
508 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509 }
510
Oliver Neukum92516442007-01-23 15:55:28 -0500511 return usb_hcd_submit_urb(urb, mem_flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -0600513EXPORT_SYMBOL_GPL(usb_submit_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700514
515/*-------------------------------------------------------------------*/
516
517/**
518 * usb_unlink_urb - abort/cancel a transfer request for an endpoint
519 * @urb: pointer to urb describing a previously submitted request,
520 * may be NULL
521 *
Alan Sternbeafef02007-07-13 15:47:16 -0400522 * This routine cancels an in-progress request. URBs complete only once
523 * per submission, and may be canceled only once per submission.
524 * Successful cancellation means termination of @urb will be expedited
525 * and the completion handler will be called with a status code
526 * indicating that the request has been canceled (rather than any other
527 * code).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700528 *
Alan Sterncde217a2008-10-21 15:28:46 -0400529 * Drivers should not call this routine or related routines, such as
530 * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect
531 * method has returned. The disconnect function should synchronize with
532 * a driver's I/O routines to insure that all URB-related activity has
533 * completed before it returns.
534 *
Alan Sternbeafef02007-07-13 15:47:16 -0400535 * This request is always asynchronous. Success is indicated by
536 * returning -EINPROGRESS, at which time the URB will probably not yet
537 * have been given back to the device driver. When it is eventually
538 * called, the completion function will see @urb->status == -ECONNRESET.
539 * Failure is indicated by usb_unlink_urb() returning any other value.
540 * Unlinking will fail when @urb is not currently "linked" (i.e., it was
541 * never submitted, or it was unlinked before, or the hardware is already
542 * finished with it), even if the completion handler has not yet run.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 *
544 * Unlinking and Endpoint Queues:
545 *
Alan Sternbeafef02007-07-13 15:47:16 -0400546 * [The behaviors and guarantees described below do not apply to virtual
547 * root hubs but only to endpoint queues for physical USB devices.]
548 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 * Host Controller Drivers (HCDs) place all the URBs for a particular
550 * endpoint in a queue. Normally the queue advances as the controller
Alan Stern8835f662005-04-18 17:39:30 -0700551 * hardware processes each request. But when an URB terminates with an
Alan Sternbeafef02007-07-13 15:47:16 -0400552 * error its queue generally stops (see below), at least until that URB's
553 * completion routine returns. It is guaranteed that a stopped queue
554 * will not restart until all its unlinked URBs have been fully retired,
555 * with their completion routines run, even if that's not until some time
556 * after the original completion handler returns. The same behavior and
557 * guarantee apply when an URB terminates because it was unlinked.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 *
Alan Sternbeafef02007-07-13 15:47:16 -0400559 * Bulk and interrupt endpoint queues are guaranteed to stop whenever an
560 * URB terminates with any sort of error, including -ECONNRESET, -ENOENT,
561 * and -EREMOTEIO. Control endpoint queues behave the same way except
562 * that they are not guaranteed to stop for -EREMOTEIO errors. Queues
563 * for isochronous endpoints are treated differently, because they must
564 * advance at fixed rates. Such queues do not stop when an URB
565 * encounters an error or is unlinked. An unlinked isochronous URB may
566 * leave a gap in the stream of packets; it is undefined whether such
567 * gaps can be filled in.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568 *
Alan Sternbeafef02007-07-13 15:47:16 -0400569 * Note that early termination of an URB because a short packet was
570 * received will generate a -EREMOTEIO error if and only if the
571 * URB_SHORT_NOT_OK flag is set. By setting this flag, USB device
572 * drivers can build deep queues for large or complex bulk transfers
573 * and clean them up reliably after any sort of aborted transfer by
574 * unlinking all pending URBs at the first fault.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575 *
Alan Sternbeafef02007-07-13 15:47:16 -0400576 * When a control URB terminates with an error other than -EREMOTEIO, it
577 * is quite likely that the status stage of the transfer will not take
578 * place.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 */
580int usb_unlink_urb(struct urb *urb)
581{
582 if (!urb)
583 return -EINVAL;
Alan Sternd617bc82007-08-02 15:04:52 -0400584 if (!urb->dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585 return -ENODEV;
Alan Sternd617bc82007-08-02 15:04:52 -0400586 if (!urb->ep)
587 return -EIDRM;
Alan Sterna6d2bb92006-08-30 11:27:36 -0400588 return usb_hcd_unlink_urb(urb, -ECONNRESET);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700589}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -0600590EXPORT_SYMBOL_GPL(usb_unlink_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591
592/**
593 * usb_kill_urb - cancel a transfer request and wait for it to finish
594 * @urb: pointer to URB describing a previously submitted request,
595 * may be NULL
596 *
597 * This routine cancels an in-progress request. It is guaranteed that
598 * upon return all completion handlers will have finished and the URB
599 * will be totally idle and available for reuse. These features make
600 * this an ideal way to stop I/O in a disconnect() callback or close()
601 * function. If the request has not already finished or been unlinked
602 * the completion handler will see urb->status == -ENOENT.
603 *
604 * While the routine is running, attempts to resubmit the URB will fail
605 * with error -EPERM. Thus even if the URB's completion handler always
606 * tries to resubmit, it will not succeed and the URB will become idle.
607 *
608 * This routine may not be used in an interrupt context (such as a bottom
609 * half or a completion handler), or when holding a spinlock, or in other
610 * situations where the caller can't schedule().
Alan Sterncde217a2008-10-21 15:28:46 -0400611 *
612 * This routine should not be called by a driver after its disconnect
613 * method has returned.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700614 */
615void usb_kill_urb(struct urb *urb)
616{
Greg Kroah-Hartmane9aa7952006-01-23 17:17:21 -0500617 might_sleep();
Alan Sternd617bc82007-08-02 15:04:52 -0400618 if (!(urb && urb->dev && urb->ep))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619 return;
Ming Lei49367d82008-12-12 21:38:45 +0800620 atomic_inc(&urb->reject);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700621
Alan Sterna6d2bb92006-08-30 11:27:36 -0400622 usb_hcd_unlink_urb(urb, -ENOENT);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623 wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
624
Ming Lei49367d82008-12-12 21:38:45 +0800625 atomic_dec(&urb->reject);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626}
Greg Kroah-Hartman782e70c2008-01-25 11:12:21 -0600627EXPORT_SYMBOL_GPL(usb_kill_urb);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700628
Oliver Neukum51a2f072007-05-25 13:40:56 +0200629/**
Oliver Neukum55b447b2008-07-29 15:26:15 +0200630 * usb_poison_urb - reliably kill a transfer and prevent further use of an URB
631 * @urb: pointer to URB describing a previously submitted request,
632 * may be NULL
633 *
634 * This routine cancels an in-progress request. It is guaranteed that
635 * upon return all completion handlers will have finished and the URB
636 * will be totally idle and cannot be reused. These features make
637 * this an ideal way to stop I/O in a disconnect() callback.
638 * If the request has not already finished or been unlinked
639 * the completion handler will see urb->status == -ENOENT.
640 *
641 * After and while the routine runs, attempts to resubmit the URB will fail
642 * with error -EPERM. Thus even if the URB's completion handler always
643 * tries to resubmit, it will not succeed and the URB will become idle.
644 *
645 * This routine may not be used in an interrupt context (such as a bottom
646 * half or a completion handler), or when holding a spinlock, or in other
647 * situations where the caller can't schedule().
Alan Sterncde217a2008-10-21 15:28:46 -0400648 *
649 * This routine should not be called by a driver after its disconnect
650 * method has returned.
Oliver Neukum55b447b2008-07-29 15:26:15 +0200651 */
652void usb_poison_urb(struct urb *urb)
653{
654 might_sleep();
655 if (!(urb && urb->dev && urb->ep))
656 return;
Ming Lei49367d82008-12-12 21:38:45 +0800657 atomic_inc(&urb->reject);
Oliver Neukum55b447b2008-07-29 15:26:15 +0200658
659 usb_hcd_unlink_urb(urb, -ENOENT);
660 wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
661}
662EXPORT_SYMBOL_GPL(usb_poison_urb);
663
664void usb_unpoison_urb(struct urb *urb)
665{
666 if (!urb)
667 return;
668
Ming Lei49367d82008-12-12 21:38:45 +0800669 atomic_dec(&urb->reject);
Oliver Neukum55b447b2008-07-29 15:26:15 +0200670}
671EXPORT_SYMBOL_GPL(usb_unpoison_urb);
672
673/**
Oliver Neukum51a2f072007-05-25 13:40:56 +0200674 * usb_kill_anchored_urbs - cancel transfer requests en masse
675 * @anchor: anchor the requests are bound to
676 *
677 * this allows all outstanding URBs to be killed starting
678 * from the back of the queue
Alan Sterncde217a2008-10-21 15:28:46 -0400679 *
680 * This routine should not be called by a driver after its disconnect
681 * method has returned.
Oliver Neukum51a2f072007-05-25 13:40:56 +0200682 */
683void usb_kill_anchored_urbs(struct usb_anchor *anchor)
684{
685 struct urb *victim;
686
687 spin_lock_irq(&anchor->lock);
688 while (!list_empty(&anchor->urb_list)) {
Greg Kroah-Hartman2c044a42008-01-30 15:21:33 -0800689 victim = list_entry(anchor->urb_list.prev, struct urb,
690 anchor_list);
Oliver Neukum51a2f072007-05-25 13:40:56 +0200691 /* we must make sure the URB isn't freed before we kill it*/
692 usb_get_urb(victim);
693 spin_unlock_irq(&anchor->lock);
694 /* this will unanchor the URB */
695 usb_kill_urb(victim);
696 usb_put_urb(victim);
697 spin_lock_irq(&anchor->lock);
698 }
699 spin_unlock_irq(&anchor->lock);
700}
701EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
702
Oliver Neukum6a2839b2008-07-29 16:18:47 +0200703
704/**
705 * usb_poison_anchored_urbs - cease all traffic from an anchor
706 * @anchor: anchor the requests are bound to
707 *
708 * this allows all outstanding URBs to be poisoned starting
709 * from the back of the queue. Newly added URBs will also be
710 * poisoned
Alan Sterncde217a2008-10-21 15:28:46 -0400711 *
712 * This routine should not be called by a driver after its disconnect
713 * method has returned.
Oliver Neukum6a2839b2008-07-29 16:18:47 +0200714 */
715void usb_poison_anchored_urbs(struct usb_anchor *anchor)
716{
717 struct urb *victim;
718
719 spin_lock_irq(&anchor->lock);
720 anchor->poisoned = 1;
721 while (!list_empty(&anchor->urb_list)) {
722 victim = list_entry(anchor->urb_list.prev, struct urb,
723 anchor_list);
724 /* we must make sure the URB isn't freed before we kill it*/
725 usb_get_urb(victim);
726 spin_unlock_irq(&anchor->lock);
727 /* this will unanchor the URB */
728 usb_poison_urb(victim);
729 usb_put_urb(victim);
730 spin_lock_irq(&anchor->lock);
731 }
732 spin_unlock_irq(&anchor->lock);
733}
734EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
Alan Sterncde217a2008-10-21 15:28:46 -0400735
Oliver Neukum51a2f072007-05-25 13:40:56 +0200736/**
Oliver Neukum856395d2008-12-18 09:17:49 +0100737 * usb_unpoison_anchored_urbs - let an anchor be used successfully again
738 * @anchor: anchor the requests are bound to
739 *
740 * Reverses the effect of usb_poison_anchored_urbs
741 * the anchor can be used normally after it returns
742 */
743void usb_unpoison_anchored_urbs(struct usb_anchor *anchor)
744{
745 unsigned long flags;
746 struct urb *lazarus;
747
748 spin_lock_irqsave(&anchor->lock, flags);
749 list_for_each_entry(lazarus, &anchor->urb_list, anchor_list) {
750 usb_unpoison_urb(lazarus);
751 }
752 anchor->poisoned = 0;
753 spin_unlock_irqrestore(&anchor->lock, flags);
754}
755EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
756/**
Oliver Neukumeda76952008-04-10 14:07:37 +0200757 * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse
758 * @anchor: anchor the requests are bound to
759 *
760 * this allows all outstanding URBs to be unlinked starting
761 * from the back of the queue. This function is asynchronous.
762 * The unlinking is just tiggered. It may happen after this
763 * function has returned.
Alan Sterncde217a2008-10-21 15:28:46 -0400764 *
765 * This routine should not be called by a driver after its disconnect
766 * method has returned.
Oliver Neukumeda76952008-04-10 14:07:37 +0200767 */
768void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
769{
770 struct urb *victim;
771
Christian Lamparterb3e67042010-08-03 02:32:28 +0200772 while ((victim = usb_get_from_anchor(anchor)) != NULL) {
Oliver Neukumeda76952008-04-10 14:07:37 +0200773 usb_unlink_urb(victim);
Oliver Neukum77571f02008-08-18 16:36:52 +0200774 usb_put_urb(victim);
Oliver Neukumeda76952008-04-10 14:07:37 +0200775 }
Oliver Neukumeda76952008-04-10 14:07:37 +0200776}
777EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
778
779/**
Oliver Neukum51a2f072007-05-25 13:40:56 +0200780 * usb_wait_anchor_empty_timeout - wait for an anchor to be unused
781 * @anchor: the anchor you want to become unused
782 * @timeout: how long you are willing to wait in milliseconds
783 *
784 * Call this is you want to be sure all an anchor's
785 * URBs have finished
786 */
787int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
788 unsigned int timeout)
789{
790 return wait_event_timeout(anchor->wait, list_empty(&anchor->urb_list),
791 msecs_to_jiffies(timeout));
792}
793EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout);
Oliver Neukum19876252008-08-25 22:40:25 +0200794
795/**
796 * usb_get_from_anchor - get an anchor's oldest urb
797 * @anchor: the anchor whose urb you want
798 *
799 * this will take the oldest urb from an anchor,
800 * unanchor and return it
801 */
802struct urb *usb_get_from_anchor(struct usb_anchor *anchor)
803{
804 struct urb *victim;
805 unsigned long flags;
806
807 spin_lock_irqsave(&anchor->lock, flags);
808 if (!list_empty(&anchor->urb_list)) {
809 victim = list_entry(anchor->urb_list.next, struct urb,
810 anchor_list);
811 usb_get_urb(victim);
Christian Lamparterb3e67042010-08-03 02:32:28 +0200812 __usb_unanchor_urb(victim, anchor);
Oliver Neukum19876252008-08-25 22:40:25 +0200813 } else {
Oliver Neukum19876252008-08-25 22:40:25 +0200814 victim = NULL;
815 }
Christian Lamparterb3e67042010-08-03 02:32:28 +0200816 spin_unlock_irqrestore(&anchor->lock, flags);
Oliver Neukum19876252008-08-25 22:40:25 +0200817
818 return victim;
819}
820
821EXPORT_SYMBOL_GPL(usb_get_from_anchor);
822
823/**
824 * usb_scuttle_anchored_urbs - unanchor all an anchor's urbs
825 * @anchor: the anchor whose urbs you want to unanchor
826 *
827 * use this to get rid of all an anchor's urbs
828 */
829void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
830{
831 struct urb *victim;
832 unsigned long flags;
833
834 spin_lock_irqsave(&anchor->lock, flags);
835 while (!list_empty(&anchor->urb_list)) {
836 victim = list_entry(anchor->urb_list.prev, struct urb,
837 anchor_list);
Christian Lamparterb3e67042010-08-03 02:32:28 +0200838 __usb_unanchor_urb(victim, anchor);
Oliver Neukum19876252008-08-25 22:40:25 +0200839 }
840 spin_unlock_irqrestore(&anchor->lock, flags);
841}
842
843EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
844
845/**
846 * usb_anchor_empty - is an anchor empty
847 * @anchor: the anchor you want to query
848 *
849 * returns 1 if the anchor has no urbs associated with it
850 */
851int usb_anchor_empty(struct usb_anchor *anchor)
852{
853 return list_empty(&anchor->urb_list);
854}
855
856EXPORT_SYMBOL_GPL(usb_anchor_empty);
857