Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver |
| 3 | * |
| 4 | * Copyright (C) 2001 REINER SCT |
| 5 | * Author: Matthias Bruestle |
| 6 | * |
| 7 | * Contact: support@reiner-sct.com (see MAINTAINERS) |
| 8 | * |
| 9 | * This program is largely derived from work by the linux-usb group |
| 10 | * and associated source files. Please see the usb/serial files for |
| 11 | * individual credits and copyrights. |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify |
| 14 | * it under the terms of the GNU General Public License as published by |
| 15 | * the Free Software Foundation; either version 2 of the License, or |
| 16 | * (at your option) any later version. |
| 17 | * |
| 18 | * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and |
| 19 | * patience. |
| 20 | * |
| 21 | * In case of problems, please write to the contact e-mail address |
| 22 | * mentioned above. |
| 23 | * |
| 24 | * Please note that later models of the cyberjack reader family are |
| 25 | * supported by a libusb-based userspace device driver. |
| 26 | * |
| 27 | * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux |
| 28 | */ |
| 29 | |
| 30 | |
| 31 | #include <linux/config.h> |
| 32 | #include <linux/kernel.h> |
| 33 | #include <linux/errno.h> |
| 34 | #include <linux/init.h> |
| 35 | #include <linux/slab.h> |
| 36 | #include <linux/tty.h> |
| 37 | #include <linux/tty_driver.h> |
| 38 | #include <linux/tty_flip.h> |
| 39 | #include <linux/module.h> |
| 40 | #include <linux/spinlock.h> |
| 41 | #include <asm/uaccess.h> |
| 42 | #include <linux/usb.h> |
| 43 | #include "usb-serial.h" |
| 44 | |
| 45 | #define CYBERJACK_LOCAL_BUF_SIZE 32 |
| 46 | |
| 47 | static int debug; |
| 48 | |
| 49 | /* |
| 50 | * Version Information |
| 51 | */ |
| 52 | #define DRIVER_VERSION "v1.01" |
| 53 | #define DRIVER_AUTHOR "Matthias Bruestle" |
| 54 | #define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver" |
| 55 | |
| 56 | |
| 57 | #define CYBERJACK_VENDOR_ID 0x0C4B |
| 58 | #define CYBERJACK_PRODUCT_ID 0x0100 |
| 59 | |
| 60 | /* Function prototypes */ |
| 61 | static int cyberjack_startup (struct usb_serial *serial); |
| 62 | static void cyberjack_shutdown (struct usb_serial *serial); |
| 63 | static int cyberjack_open (struct usb_serial_port *port, struct file *filp); |
| 64 | static void cyberjack_close (struct usb_serial_port *port, struct file *filp); |
| 65 | static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count); |
| 66 | static int cyberjack_write_room( struct usb_serial_port *port ); |
| 67 | static void cyberjack_read_int_callback (struct urb *urb, struct pt_regs *regs); |
| 68 | static void cyberjack_read_bulk_callback (struct urb *urb, struct pt_regs *regs); |
| 69 | static void cyberjack_write_bulk_callback (struct urb *urb, struct pt_regs *regs); |
| 70 | |
| 71 | static struct usb_device_id id_table [] = { |
| 72 | { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, |
| 73 | { } /* Terminating entry */ |
| 74 | }; |
| 75 | |
| 76 | MODULE_DEVICE_TABLE (usb, id_table); |
| 77 | |
| 78 | static struct usb_driver cyberjack_driver = { |
| 79 | .owner = THIS_MODULE, |
| 80 | .name = "cyberjack", |
| 81 | .probe = usb_serial_probe, |
| 82 | .disconnect = usb_serial_disconnect, |
| 83 | .id_table = id_table, |
| 84 | }; |
| 85 | |
| 86 | static struct usb_serial_device_type cyberjack_device = { |
| 87 | .owner = THIS_MODULE, |
| 88 | .name = "Reiner SCT Cyberjack USB card reader", |
| 89 | .short_name = "cyberjack", |
| 90 | .id_table = id_table, |
| 91 | .num_interrupt_in = 1, |
| 92 | .num_bulk_in = 1, |
| 93 | .num_bulk_out = 1, |
| 94 | .num_ports = 1, |
| 95 | .attach = cyberjack_startup, |
| 96 | .shutdown = cyberjack_shutdown, |
| 97 | .open = cyberjack_open, |
| 98 | .close = cyberjack_close, |
| 99 | .write = cyberjack_write, |
| 100 | .write_room = cyberjack_write_room, |
| 101 | .read_int_callback = cyberjack_read_int_callback, |
| 102 | .read_bulk_callback = cyberjack_read_bulk_callback, |
| 103 | .write_bulk_callback = cyberjack_write_bulk_callback, |
| 104 | }; |
| 105 | |
| 106 | struct cyberjack_private { |
| 107 | spinlock_t lock; /* Lock for SMP */ |
| 108 | short rdtodo; /* Bytes still to read */ |
| 109 | unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */ |
| 110 | short wrfilled; /* Overall data size we already got */ |
| 111 | short wrsent; /* Data already sent */ |
| 112 | }; |
| 113 | |
| 114 | /* do some startup allocations not currently performed by usb_serial_probe() */ |
| 115 | static int cyberjack_startup (struct usb_serial *serial) |
| 116 | { |
| 117 | struct cyberjack_private *priv; |
| 118 | int i; |
| 119 | |
| 120 | dbg("%s", __FUNCTION__); |
| 121 | |
| 122 | /* allocate the private data structure */ |
| 123 | priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); |
| 124 | if (!priv) |
| 125 | return -ENOMEM; |
| 126 | |
| 127 | /* set initial values */ |
| 128 | spin_lock_init(&priv->lock); |
| 129 | priv->rdtodo = 0; |
| 130 | priv->wrfilled = 0; |
| 131 | priv->wrsent = 0; |
| 132 | usb_set_serial_port_data(serial->port[0], priv); |
| 133 | |
| 134 | init_waitqueue_head(&serial->port[0]->write_wait); |
| 135 | |
| 136 | for (i = 0; i < serial->num_ports; ++i) { |
| 137 | int result; |
| 138 | serial->port[i]->interrupt_in_urb->dev = serial->dev; |
| 139 | result = usb_submit_urb(serial->port[i]->interrupt_in_urb, |
| 140 | GFP_KERNEL); |
| 141 | if (result) |
| 142 | err(" usb_submit_urb(read int) failed"); |
| 143 | dbg("%s - usb_submit_urb(int urb)", __FUNCTION__); |
| 144 | } |
| 145 | |
| 146 | return( 0 ); |
| 147 | } |
| 148 | |
| 149 | static void cyberjack_shutdown (struct usb_serial *serial) |
| 150 | { |
| 151 | int i; |
| 152 | |
| 153 | dbg("%s", __FUNCTION__); |
| 154 | |
| 155 | for (i=0; i < serial->num_ports; ++i) { |
| 156 | usb_kill_urb(serial->port[i]->interrupt_in_urb); |
| 157 | /* My special items, the standard routines free my urbs */ |
| 158 | kfree(usb_get_serial_port_data(serial->port[i])); |
| 159 | usb_set_serial_port_data(serial->port[i], NULL); |
| 160 | } |
| 161 | } |
| 162 | |
| 163 | static int cyberjack_open (struct usb_serial_port *port, struct file *filp) |
| 164 | { |
| 165 | struct cyberjack_private *priv; |
| 166 | unsigned long flags; |
| 167 | int result = 0; |
| 168 | |
| 169 | dbg("%s - port %d", __FUNCTION__, port->number); |
| 170 | |
| 171 | dbg("%s - usb_clear_halt", __FUNCTION__ ); |
| 172 | usb_clear_halt(port->serial->dev, port->write_urb->pipe); |
| 173 | |
| 174 | /* force low_latency on so that our tty_push actually forces |
| 175 | * the data through, otherwise it is scheduled, and with high |
| 176 | * data rates (like with OHCI) data can get lost. |
| 177 | */ |
| 178 | port->tty->low_latency = 1; |
| 179 | |
| 180 | priv = usb_get_serial_port_data(port); |
| 181 | spin_lock_irqsave(&priv->lock, flags); |
| 182 | priv->rdtodo = 0; |
| 183 | priv->wrfilled = 0; |
| 184 | priv->wrsent = 0; |
| 185 | spin_unlock_irqrestore(&priv->lock, flags); |
| 186 | |
| 187 | return result; |
| 188 | } |
| 189 | |
| 190 | static void cyberjack_close (struct usb_serial_port *port, struct file *filp) |
| 191 | { |
| 192 | dbg("%s - port %d", __FUNCTION__, port->number); |
| 193 | |
| 194 | if (port->serial->dev) { |
| 195 | /* shutdown any bulk reads that might be going on */ |
| 196 | usb_kill_urb(port->write_urb); |
| 197 | usb_kill_urb(port->read_urb); |
| 198 | } |
| 199 | } |
| 200 | |
| 201 | static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count) |
| 202 | { |
| 203 | struct usb_serial *serial = port->serial; |
| 204 | struct cyberjack_private *priv = usb_get_serial_port_data(port); |
| 205 | unsigned long flags; |
| 206 | int result; |
| 207 | int wrexpected; |
| 208 | |
| 209 | dbg("%s - port %d", __FUNCTION__, port->number); |
| 210 | |
| 211 | if (count == 0) { |
| 212 | dbg("%s - write request of 0 bytes", __FUNCTION__); |
| 213 | return (0); |
| 214 | } |
| 215 | |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 216 | spin_lock(&port->lock); |
| 217 | if (port->write_urb_busy) { |
| 218 | spin_unlock(&port->lock); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 219 | dbg("%s - already writing", __FUNCTION__); |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 220 | return 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 221 | } |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 222 | port->write_urb_busy = 1; |
| 223 | spin_unlock(&port->lock); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 224 | |
| 225 | spin_lock_irqsave(&priv->lock, flags); |
| 226 | |
| 227 | if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ) { |
| 228 | /* To much data for buffer. Reset buffer. */ |
| 229 | priv->wrfilled=0; |
| 230 | spin_unlock_irqrestore(&priv->lock, flags); |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 231 | port->write_urb_busy = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 232 | return (0); |
| 233 | } |
| 234 | |
| 235 | /* Copy data */ |
| 236 | memcpy (priv->wrbuf+priv->wrfilled, buf, count); |
| 237 | |
| 238 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, |
| 239 | priv->wrbuf+priv->wrfilled); |
| 240 | priv->wrfilled += count; |
| 241 | |
| 242 | if( priv->wrfilled >= 3 ) { |
| 243 | wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; |
| 244 | dbg("%s - expected data: %d", __FUNCTION__, wrexpected); |
| 245 | } else { |
| 246 | wrexpected = sizeof(priv->wrbuf); |
| 247 | } |
| 248 | |
| 249 | if( priv->wrfilled >= wrexpected ) { |
| 250 | /* We have enough data to begin transmission */ |
| 251 | int length; |
| 252 | |
| 253 | dbg("%s - transmitting data (frame 1)", __FUNCTION__); |
| 254 | length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected; |
| 255 | |
| 256 | memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length ); |
| 257 | priv->wrsent=length; |
| 258 | |
| 259 | /* set up our urb */ |
| 260 | usb_fill_bulk_urb(port->write_urb, serial->dev, |
| 261 | usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), |
| 262 | port->write_urb->transfer_buffer, length, |
| 263 | ((serial->type->write_bulk_callback) ? |
| 264 | serial->type->write_bulk_callback : |
| 265 | cyberjack_write_bulk_callback), |
| 266 | port); |
| 267 | |
| 268 | /* send the data out the bulk port */ |
| 269 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| 270 | if (result) { |
| 271 | err("%s - failed submitting write urb, error %d", __FUNCTION__, result); |
| 272 | /* Throw away data. No better idea what to do with it. */ |
| 273 | priv->wrfilled=0; |
| 274 | priv->wrsent=0; |
| 275 | spin_unlock_irqrestore(&priv->lock, flags); |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 276 | port->write_urb_busy = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 277 | return 0; |
| 278 | } |
| 279 | |
| 280 | dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent); |
| 281 | dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled); |
| 282 | |
| 283 | if( priv->wrsent>=priv->wrfilled ) { |
| 284 | dbg("%s - buffer cleaned", __FUNCTION__); |
| 285 | memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); |
| 286 | priv->wrfilled=0; |
| 287 | priv->wrsent=0; |
| 288 | } |
| 289 | } |
| 290 | |
| 291 | spin_unlock_irqrestore(&priv->lock, flags); |
| 292 | |
| 293 | return (count); |
| 294 | } |
| 295 | |
| 296 | static int cyberjack_write_room( struct usb_serial_port *port ) |
| 297 | { |
| 298 | return CYBERJACK_LOCAL_BUF_SIZE; |
| 299 | } |
| 300 | |
| 301 | static void cyberjack_read_int_callback( struct urb *urb, struct pt_regs *regs ) |
| 302 | { |
| 303 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; |
| 304 | struct cyberjack_private *priv = usb_get_serial_port_data(port); |
| 305 | unsigned char *data = urb->transfer_buffer; |
| 306 | int result; |
| 307 | |
| 308 | dbg("%s - port %d", __FUNCTION__, port->number); |
| 309 | |
| 310 | /* the urb might have been killed. */ |
| 311 | if (urb->status) |
| 312 | return; |
| 313 | |
| 314 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); |
| 315 | |
| 316 | /* React only to interrupts signaling a bulk_in transfer */ |
| 317 | if( (urb->actual_length==4) && (data[0]==0x01) ) { |
| 318 | short old_rdtodo; |
| 319 | int result; |
| 320 | |
| 321 | /* This is a announcement of coming bulk_ins. */ |
| 322 | unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3; |
| 323 | |
| 324 | spin_lock(&priv->lock); |
| 325 | |
| 326 | old_rdtodo = priv->rdtodo; |
| 327 | |
| 328 | if( (old_rdtodo+size)<(old_rdtodo) ) { |
| 329 | dbg( "To many bulk_in urbs to do." ); |
| 330 | spin_unlock(&priv->lock); |
| 331 | goto resubmit; |
| 332 | } |
| 333 | |
| 334 | /* "+=" is probably more fault tollerant than "=" */ |
| 335 | priv->rdtodo += size; |
| 336 | |
| 337 | dbg("%s - rdtodo: %d", __FUNCTION__, priv->rdtodo); |
| 338 | |
| 339 | spin_unlock(&priv->lock); |
| 340 | |
| 341 | if( !old_rdtodo ) { |
| 342 | port->read_urb->dev = port->serial->dev; |
| 343 | result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| 344 | if( result ) |
| 345 | err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); |
| 346 | dbg("%s - usb_submit_urb(read urb)", __FUNCTION__); |
| 347 | } |
| 348 | } |
| 349 | |
| 350 | resubmit: |
| 351 | port->interrupt_in_urb->dev = port->serial->dev; |
| 352 | result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); |
| 353 | if (result) |
| 354 | err(" usb_submit_urb(read int) failed"); |
| 355 | dbg("%s - usb_submit_urb(int urb)", __FUNCTION__); |
| 356 | } |
| 357 | |
| 358 | static void cyberjack_read_bulk_callback (struct urb *urb, struct pt_regs *regs) |
| 359 | { |
| 360 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; |
| 361 | struct cyberjack_private *priv = usb_get_serial_port_data(port); |
| 362 | struct tty_struct *tty; |
| 363 | unsigned char *data = urb->transfer_buffer; |
| 364 | short todo; |
| 365 | int i; |
| 366 | int result; |
| 367 | |
| 368 | dbg("%s - port %d", __FUNCTION__, port->number); |
| 369 | |
| 370 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); |
| 371 | if (urb->status) { |
| 372 | dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); |
| 373 | return; |
| 374 | } |
| 375 | |
| 376 | tty = port->tty; |
| 377 | if (!tty) { |
| 378 | dbg("%s - ignoring since device not open\n", __FUNCTION__); |
| 379 | return; |
| 380 | } |
| 381 | if (urb->actual_length) { |
| 382 | for (i = 0; i < urb->actual_length ; ++i) { |
| 383 | /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ |
| 384 | if(tty->flip.count >= TTY_FLIPBUF_SIZE) { |
| 385 | tty_flip_buffer_push(tty); |
| 386 | } |
| 387 | /* this doesn't actually push the data through unless tty->low_latency is set */ |
| 388 | tty_insert_flip_char(tty, data[i], 0); |
| 389 | } |
| 390 | tty_flip_buffer_push(tty); |
| 391 | } |
| 392 | |
| 393 | spin_lock(&priv->lock); |
| 394 | |
| 395 | /* Reduce urbs to do by one. */ |
| 396 | priv->rdtodo-=urb->actual_length; |
| 397 | /* Just to be sure */ |
| 398 | if ( priv->rdtodo<0 ) priv->rdtodo = 0; |
| 399 | todo = priv->rdtodo; |
| 400 | |
| 401 | spin_unlock(&priv->lock); |
| 402 | |
| 403 | dbg("%s - rdtodo: %d", __FUNCTION__, todo); |
| 404 | |
| 405 | /* Continue to read if we have still urbs to do. */ |
| 406 | if( todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) { |
| 407 | port->read_urb->dev = port->serial->dev; |
| 408 | result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| 409 | if (result) |
| 410 | err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); |
| 411 | dbg("%s - usb_submit_urb(read urb)", __FUNCTION__); |
| 412 | } |
| 413 | } |
| 414 | |
| 415 | static void cyberjack_write_bulk_callback (struct urb *urb, struct pt_regs *regs) |
| 416 | { |
| 417 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; |
| 418 | struct cyberjack_private *priv = usb_get_serial_port_data(port); |
| 419 | |
| 420 | dbg("%s - port %d", __FUNCTION__, port->number); |
Greg Kroah-Hartman | 507ca9b | 2005-04-23 12:49:16 -0700 | [diff] [blame^] | 421 | |
| 422 | port->write_urb_busy = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 423 | if (urb->status) { |
| 424 | dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); |
| 425 | return; |
| 426 | } |
| 427 | |
| 428 | spin_lock(&priv->lock); |
| 429 | |
| 430 | /* only do something if we have more data to send */ |
| 431 | if( priv->wrfilled ) { |
| 432 | int length, blksize, result; |
| 433 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 434 | dbg("%s - transmitting data (frame n)", __FUNCTION__); |
| 435 | |
| 436 | length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? |
| 437 | port->bulk_out_size : (priv->wrfilled - priv->wrsent); |
| 438 | |
| 439 | memcpy (port->write_urb->transfer_buffer, priv->wrbuf + priv->wrsent, |
| 440 | length ); |
| 441 | priv->wrsent+=length; |
| 442 | |
| 443 | /* set up our urb */ |
| 444 | usb_fill_bulk_urb(port->write_urb, port->serial->dev, |
| 445 | usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), |
| 446 | port->write_urb->transfer_buffer, length, |
| 447 | ((port->serial->type->write_bulk_callback) ? |
| 448 | port->serial->type->write_bulk_callback : |
| 449 | cyberjack_write_bulk_callback), |
| 450 | port); |
| 451 | |
| 452 | /* send the data out the bulk port */ |
| 453 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); |
| 454 | if (result) { |
| 455 | err("%s - failed submitting write urb, error %d", __FUNCTION__, result); |
| 456 | /* Throw away data. No better idea what to do with it. */ |
| 457 | priv->wrfilled=0; |
| 458 | priv->wrsent=0; |
| 459 | goto exit; |
| 460 | } |
| 461 | |
| 462 | dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent); |
| 463 | dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled); |
| 464 | |
| 465 | blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; |
| 466 | |
| 467 | if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) { |
| 468 | dbg("%s - buffer cleaned", __FUNCTION__); |
| 469 | memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); |
| 470 | priv->wrfilled=0; |
| 471 | priv->wrsent=0; |
| 472 | } |
| 473 | } |
| 474 | |
| 475 | exit: |
| 476 | spin_unlock(&priv->lock); |
| 477 | schedule_work(&port->work); |
| 478 | } |
| 479 | |
| 480 | static int __init cyberjack_init (void) |
| 481 | { |
| 482 | int retval; |
| 483 | retval = usb_serial_register(&cyberjack_device); |
| 484 | if (retval) |
| 485 | goto failed_usb_serial_register; |
| 486 | retval = usb_register(&cyberjack_driver); |
| 487 | if (retval) |
| 488 | goto failed_usb_register; |
| 489 | |
| 490 | info(DRIVER_VERSION " " DRIVER_AUTHOR); |
| 491 | info(DRIVER_DESC); |
| 492 | |
| 493 | return 0; |
| 494 | failed_usb_register: |
| 495 | usb_serial_deregister(&cyberjack_device); |
| 496 | failed_usb_serial_register: |
| 497 | return retval; |
| 498 | } |
| 499 | |
| 500 | static void __exit cyberjack_exit (void) |
| 501 | { |
| 502 | usb_deregister (&cyberjack_driver); |
| 503 | usb_serial_deregister (&cyberjack_device); |
| 504 | } |
| 505 | |
| 506 | module_init(cyberjack_init); |
| 507 | module_exit(cyberjack_exit); |
| 508 | |
| 509 | MODULE_AUTHOR( DRIVER_AUTHOR ); |
| 510 | MODULE_DESCRIPTION( DRIVER_DESC ); |
| 511 | MODULE_VERSION( DRIVER_VERSION ); |
| 512 | MODULE_LICENSE("GPL"); |
| 513 | |
| 514 | module_param(debug, bool, S_IRUGO | S_IWUSR); |
| 515 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |