blob: 25105c1027fe44c1862b94605ca8d6fd520ff3c1 [file] [log] [blame]
Daniel Walker50bc0ef2010-12-13 14:35:11 -08001/* linux/arch/arm/mach-msm/board-trout-mddi.c
2** Author: Brian Swetland <swetland@google.com>
3*/
Russell King2f8163b2011-07-26 10:53:52 +01004#include <linux/gpio.h>
Daniel Walker50bc0ef2010-12-13 14:35:11 -08005#include <linux/kernel.h>
6#include <linux/init.h>
7#include <linux/platform_device.h>
8#include <linux/delay.h>
9#include <linux/leds.h>
10#include <linux/clk.h>
11#include <linux/err.h>
12
13#include <asm/io.h>
Daniel Walker50bc0ef2010-12-13 14:35:11 -080014#include <asm/mach-types.h>
15
16#include <mach/msm_fb.h>
17#include <mach/vreg.h>
18
19#include "board-trout.h"
20#include "proc_comm.h"
21#include "devices.h"
22
23#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
24
25#define MDDI_CLIENT_CORE_BASE 0x108000
26#define LCD_CONTROL_BLOCK_BASE 0x110000
27#define SPI_BLOCK_BASE 0x120000
28#define I2C_BLOCK_BASE 0x130000
29#define PWM_BLOCK_BASE 0x140000
30#define GPIO_BLOCK_BASE 0x150000
31#define SYSTEM_BLOCK1_BASE 0x160000
32#define SYSTEM_BLOCK2_BASE 0x170000
33
34
35#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
36#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C)
37#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
38
39#define V_VDDE2E_VDD2_GPIO 0
40#define MDDI_RST_N 82
41
42#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
43#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
44#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
45#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
46#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
47#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
48#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
49#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
50#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
51#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
52#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
53#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
54#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
55#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
56#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
57#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
58#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
59#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
60#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
61#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
62#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
63#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
64
65#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
66#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
67#define START (LCD_CONTROL_BLOCK_BASE|0x08)
68#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
69#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
70#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
71#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
72#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
73#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
74#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
75#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
76#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
77#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
78#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
79#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
80#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
81#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
82#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
83#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
84#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
85#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
86#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
87#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
88#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
89#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
90#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
91#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
92#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
93#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
94#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
95#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
96#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
97#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
98#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
99#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
100
101#define SSICTL (SPI_BLOCK_BASE|0x00)
102#define SSITIME (SPI_BLOCK_BASE|0x04)
103#define SSITX (SPI_BLOCK_BASE|0x08)
104#define SSIRX (SPI_BLOCK_BASE|0x0C)
105#define SSIINTC (SPI_BLOCK_BASE|0x10)
106#define SSIINTS (SPI_BLOCK_BASE|0x14)
107#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
108#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
109#define SSIID (SPI_BLOCK_BASE|0x20)
110
111#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
112#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
113#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
114#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
115#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
116
117#define GPIODATA (GPIO_BLOCK_BASE|0x00)
118#define GPIODIR (GPIO_BLOCK_BASE|0x04)
119#define GPIOIS (GPIO_BLOCK_BASE|0x08)
120#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
121#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
122#define GPIOIE (GPIO_BLOCK_BASE|0x14)
123#define GPIORIS (GPIO_BLOCK_BASE|0x18)
124#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
125#define GPIOIC (GPIO_BLOCK_BASE|0x20)
126#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
127#define GPIOPC (GPIO_BLOCK_BASE|0x28)
128#define GPIOID (GPIO_BLOCK_BASE|0x30)
129
130#define SPI_WRITE(reg, val) \
131 { SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
132 { 0, 5 },
133
134#define SPI_WRITE1(reg) \
135 { SSITX, (reg) & 0xff }, \
136 { 0, 5 },
137
138struct mddi_table {
139 uint32_t reg;
140 uint32_t value;
141};
142static struct mddi_table mddi_toshiba_init_table[] = {
143 { DPSET0, 0x09e90046 },
144 { DPSET1, 0x00000118 },
145 { DPSUS, 0x00000000 },
146 { DPRUN, 0x00000001 },
147 { 1, 14 }, /* msleep 14 */
148 { SYSCKENA, 0x00000001 },
149 { CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */
150
151 { GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
152 { GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */
153 { GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */
154 { GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */
155 { WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */
156
157 { GPIOIBE, 0x000003FF },
158 { GPIOIS, 0x00000000 },
159 { GPIOIC, 0x000003FF },
160 { GPIOIE, 0x00000000 },
161
162 { GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
163 { 1, 1 }, /* msleep 1 */
164 { GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
165 { DRAMPWR, 0x00000001 }, /* eDRAM power */
166};
167
168#define GPIOSEL_VWAKEINT (1U << 0)
169#define INTMASK_VWAKEOUT (1U << 0)
170
171
172static struct clk *gp_clk;
173static int trout_new_backlight = 1;
174static struct vreg *vreg_mddi_1v5;
175static struct vreg *vreg_lcm_2v85;
176
177static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
178 struct mddi_table *table, size_t count)
179{
180 int i;
181 for (i = 0; i < count; i++) {
182 uint32_t reg = table[i].reg;
183 uint32_t value = table[i].value;
184
185 if (reg == 0)
186 udelay(value);
187 else if (reg == 1)
188 msleep(value);
189 else
190 client_data->remote_write(client_data, value, reg);
191 }
192}
193
194static int trout_mddi_toshiba_client_init(
195 struct msm_mddi_bridge_platform_data *bridge_data,
196 struct msm_mddi_client_data *client_data)
197{
198 int panel_id;
199
200 client_data->auto_hibernate(client_data, 0);
201 trout_process_mddi_table(client_data, mddi_toshiba_init_table,
202 ARRAY_SIZE(mddi_toshiba_init_table));
203 client_data->auto_hibernate(client_data, 1);
204 panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
205 if (panel_id > 1) {
206 printk(KERN_WARNING "unknown panel id at mddi_enable\n");
207 return -1;
208 }
209 return 0;
210}
211
212static int trout_mddi_toshiba_client_uninit(
213 struct msm_mddi_bridge_platform_data *bridge_data,
214 struct msm_mddi_client_data *client_data)
215{
216 return 0;
217}
218
219static struct resource resources_msm_fb[] = {
220 {
221 .start = MSM_FB_BASE,
222 .end = MSM_FB_BASE + MSM_FB_SIZE,
223 .flags = IORESOURCE_MEM,
224 },
225};
226
227struct msm_mddi_bridge_platform_data toshiba_client_data = {
228 .init = trout_mddi_toshiba_client_init,
229 .uninit = trout_mddi_toshiba_client_uninit,
230 .fb_data = {
231 .xres = 320,
232 .yres = 480,
233 .width = 45,
234 .height = 67,
235 .output_format = 0,
236 },
237};
238
239static struct msm_mddi_platform_data mddi_pdata = {
240 .clk_rate = 122880000,
241 .fb_resource = resources_msm_fb,
242 .num_clients = 1,
243 .client_platform_data = {
244 {
245 .product_id = (0xd263 << 16 | 0),
246 .name = "mddi_c_d263_0000",
247 .id = 0,
248 .client_data = &toshiba_client_data,
249 .clk_rate = 0,
250 },
251 },
252};
253
254int __init trout_init_panel(void)
255{
256 int rc;
257
258 if (!machine_is_trout())
259 return 0;
260 vreg_mddi_1v5 = vreg_get(0, "gp2");
261 if (IS_ERR(vreg_mddi_1v5))
262 return PTR_ERR(vreg_mddi_1v5);
263 vreg_lcm_2v85 = vreg_get(0, "gp4");
264 if (IS_ERR(vreg_lcm_2v85))
265 return PTR_ERR(vreg_lcm_2v85);
266
267 trout_new_backlight = system_rev >= 5;
268 if (trout_new_backlight) {
269 uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
270 GPIO_NO_PULL, GPIO_8MA);
271 msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
272 } else {
273 uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
274 GPIO_NO_PULL, GPIO_8MA);
275 msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
276
277 gp_clk = clk_get(NULL, "gp_clk");
278 if (IS_ERR(gp_clk)) {
279 printk(KERN_ERR "trout_init_panel: could not get gp"
280 "clock\n");
281 gp_clk = NULL;
282 }
283 rc = clk_set_rate(gp_clk, 19200000);
284 if (rc)
285 printk(KERN_ERR "trout_init_panel: set clock rate "
286 "failed\n");
287 }
288
289 rc = platform_device_register(&msm_device_mdp);
290 if (rc)
291 return rc;
292 msm_device_mddi0.dev.platform_data = &mddi_pdata;
293 return platform_device_register(&msm_device_mddi0);
294}
295
296device_initcall(trout_init_panel);