blob: 803c74d6066f3bf24e2cbf6cf615dd580f82b298 [file] [log] [blame]
Ralf Baechled203a7e2005-09-06 15:19:37 -07001/*
2 * saa7191.h - Philips SAA7191 video decoder driver
3 *
4 * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
5 * Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#ifndef _SAA7191_H_
13#define _SAA7191_H_
14
15/* Philips SAA7191 DMSD I2C bus address */
16#define SAA7191_ADDR 0x8a
17
18/* Register subaddresses. */
19#define SAA7191_REG_IDEL 0x00
20#define SAA7191_REG_HSYB 0x01
21#define SAA7191_REG_HSYS 0x02
22#define SAA7191_REG_HCLB 0x03
23#define SAA7191_REG_HCLS 0x04
24#define SAA7191_REG_HPHI 0x05
25#define SAA7191_REG_LUMA 0x06
26#define SAA7191_REG_HUEC 0x07
Ladislav Michla637a112005-09-01 15:07:34 +000027#define SAA7191_REG_CKTQ 0x08 /* bits 3-7 */
28#define SAA7191_REG_CKTS 0x09 /* bits 3-7 */
Ralf Baechled203a7e2005-09-06 15:19:37 -070029#define SAA7191_REG_PLSE 0x0a
30#define SAA7191_REG_SESE 0x0b
31#define SAA7191_REG_GAIN 0x0c
32#define SAA7191_REG_STDC 0x0d
33#define SAA7191_REG_IOCK 0x0e
34#define SAA7191_REG_CTL3 0x0f
35#define SAA7191_REG_CTL4 0x10
36#define SAA7191_REG_CHCV 0x11
37#define SAA7191_REG_HS6B 0x14
38#define SAA7191_REG_HS6S 0x15
39#define SAA7191_REG_HC6B 0x16
40#define SAA7191_REG_HC6S 0x17
41#define SAA7191_REG_HP6I 0x18
42#define SAA7191_REG_STATUS 0xff /* not really a subaddress */
43
44/* Status Register definitions */
45#define SAA7191_STATUS_CODE 0x01 /* color detected flag */
Ladislav Michla637a112005-09-01 15:07:34 +000046#define SAA7191_STATUS_FIDT 0x20 /* signal type 50/60 Hz */
47#define SAA7191_STATUS_HLCK 0x40 /* PLL unlocked(1)/locked(0) */
Ralf Baechled203a7e2005-09-06 15:19:37 -070048#define SAA7191_STATUS_STTC 0x80 /* tv/vtr time constant */
49
50/* Luminance Control Register definitions */
Ladislav Michla637a112005-09-01 15:07:34 +000051/* input mode select bit:
52 * 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */
Ralf Baechled203a7e2005-09-06 15:19:37 -070053#define SAA7191_LUMA_BYPS 0x80
Ladislav Michla637a112005-09-01 15:07:34 +000054/* pre-filter (only when chrominance trap is active) */
55#define SAA7191_LUMA_PREF 0x40
56/* aperture bandpass to select different characteristics with maximums
57 * (bits 4-5) */
58#define SAA7191_LUMA_BPSS_MASK 0x30
59#define SAA7191_LUMA_BPSS_SHIFT 4
60#define SAA7191_LUMA_BPSS_3 0x30
61#define SAA7191_LUMA_BPSS_2 0x20
62#define SAA7191_LUMA_BPSS_1 0x10
63#define SAA7191_LUMA_BPSS_0 0x00
64/* coring range for high frequency components according to 8-bit luminance
65 * (bits 2-3)
66 * 0=coring off, n= (+-)n LSB */
67#define SAA7191_LUMA_CORI_MASK 0x0c
68#define SAA7191_LUMA_CORI_SHIFT 2
69#define SAA7191_LUMA_CORI_3 0x0c
70#define SAA7191_LUMA_CORI_2 0x08
71#define SAA7191_LUMA_CORI_1 0x04
72#define SAA7191_LUMA_CORI_0 0x00
73/* aperture bandpass filter weights high frequency components of luminance
74 * signal (bits 0-1)
75 * 0=factor 0, 1=0.25, 2=0.5, 3=1 */
76#define SAA7191_LUMA_APER_MASK 0x03
77#define SAA7191_LUMA_APER_SHIFT 0
78#define SAA7191_LUMA_APER_3 0x03
79#define SAA7191_LUMA_APER_2 0x02
80#define SAA7191_LUMA_APER_1 0x01
81#define SAA7191_LUMA_APER_0 0x00
Ralf Baechled203a7e2005-09-06 15:19:37 -070082
Ladislav Michla637a112005-09-01 15:07:34 +000083/* Chrominance Gain Control Settings Register definitions */
84/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */
Ralf Baechled203a7e2005-09-06 15:19:37 -070085#define SAA7191_GAIN_COLO 0x80
Ladislav Michla637a112005-09-01 15:07:34 +000086/* chrominance gain control (AGC filter)
87 * 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */
88#define SAA7191_GAIN_LFIS_MASK 0x60
89#define SAA7191_GAIN_LFIS_SHIFT 5
90#define SAA7191_GAIN_LFIS_3 0x60
91#define SAA7191_GAIN_LFIS_2 0x40
92#define SAA7191_GAIN_LFIS_1 0x20
93#define SAA7191_GAIN_LFIS_0 0x00
Ralf Baechled203a7e2005-09-06 15:19:37 -070094
95/* Standard/Mode Control Register definitions */
96/* tv/vtr mode bit: 0=TV mode (slow time constant),
97 * 1=VTR mode (fast time constant) */
98#define SAA7191_STDC_VTRC 0x80
Ladislav Michla637a112005-09-01 15:07:34 +000099/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs)
100 * 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */
101#define SAA7191_STDC_NFEN 0x08
102/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */
103#define SAA7191_STDC_HRMV 0x04
104/* general purpose switch 0
105 * (not used with VINO afaik) */
106#define SAA7191_STDC_GPSW0 0x02
Ralf Baechled203a7e2005-09-06 15:19:37 -0700107/* SECAM mode bit: 0=other standards, 1=SECAM */
108#define SAA7191_STDC_SECS 0x01
Ralf Baechled203a7e2005-09-06 15:19:37 -0700109
110/* I/O and Clock Control Register definitions */
111/* horizontal clock PLL: 0=PLL closed,
112 * 1=PLL circuit open and horizontal freq fixed */
113#define SAA7191_IOCK_HPLL 0x80
Ladislav Michla637a112005-09-01 15:07:34 +0000114/* colour-difference output enable (outputs UV0-UV7) */
115#define SAA7191_IOCK_OEDC 0x40
116/* H-sync output enable */
117#define SAA7191_IOCK_OEHS 0x20
118/* V-sync output enable */
119#define SAA7191_IOCK_OEVS 0x10
120/* luminance output enable (outputs Y0-Y7) */
121#define SAA7191_IOCK_OEDY 0x08
Ralf Baechled203a7e2005-09-06 15:19:37 -0700122/* S-VHS bit (chrominance from CVBS or from chrominance input):
123 * 0=controlled by BYPS-bit, 1=from chrominance input */
124#define SAA7191_IOCK_CHRS 0x04
125/* general purpose switch 2
126 * VINO-specific: 0=used with CVBS, 1=used with S-Video */
127#define SAA7191_IOCK_GPSW2 0x02
128/* general purpose switch 1 */
129/* VINO-specific: 0=always, 1=not used!*/
130#define SAA7191_IOCK_GPSW1 0x01
131
132/* Miscellaneous Control #1 Register definitions */
133/* automatic field detection (50/60Hz standard) */
134#define SAA7191_CTL3_AUFD 0x80
135/* field select: (if AUFD=0)
136 * 0=50Hz (625 lines), 1=60Hz (525 lines) */
137#define SAA7191_CTL3_FSEL 0x40
Ladislav Michla637a112005-09-01 15:07:34 +0000138/* SECAM cross-colour reduction enable */
139#define SAA7191_CTL3_SXCR 0x20
140/* sync and clamping pulse enable (HCL and HSY outputs) */
141#define SAA7191_CTL3_SCEN 0x10
142/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */
143#define SAA7191_CTL3_OFTS 0x08
144/* luminance delay compensation
145 * 0=0*2/LLC, 1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC,
146 * 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC
147 * step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */
148#define SAA7191_CTL3_YDEL_MASK 0x07
149#define SAA7191_CTL3_YDEL_SHIFT 0
150#define SAA7191_CTL3_YDEL2 0x04
151#define SAA7191_CTL3_YDEL1 0x02
152#define SAA7191_CTL3_YDEL0 0x01
153
154/* Miscellaneous Control #2 Register definitions */
155/* select HREF position
156 * 0=normal, HREF is matched to YUV output port,
157 * 1=HREF is matched to CVBS input port */
158#define SAA7191_CTL4_HRFS 0x04
159/* vertical noise reduction
160 * 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */
161#define SAA7191_CTL4_VNOI_MASK 0x03
162#define SAA7191_CTL4_VNOI_SHIFT 0
163#define SAA7191_CTL4_VNOI_3 0x03
164#define SAA7191_CTL4_VNOI_2 0x02
165#define SAA7191_CTL4_VNOI_1 0x01
166#define SAA7191_CTL4_VNOI_0 0x00
Ralf Baechled203a7e2005-09-06 15:19:37 -0700167
168/* Chrominance Gain Control Register definitions
Ladislav Michla637a112005-09-01 15:07:34 +0000169 * - for QAM-modulated input signals, effects output amplitude
170 * (SECAM gain fixed)
171 * (nominal values for UV CCIR level) */
Ralf Baechled203a7e2005-09-06 15:19:37 -0700172#define SAA7191_CHCV_NTSC 0x2c
173#define SAA7191_CHCV_PAL 0x59
174
175/* Driver interface definitions */
176#define SAA7191_INPUT_COMPOSITE 0
177#define SAA7191_INPUT_SVIDEO 1
178
Ralf Baechled203a7e2005-09-06 15:19:37 -0700179#define SAA7191_NORM_PAL 1
180#define SAA7191_NORM_NTSC 2
181#define SAA7191_NORM_SECAM 3
Ralf Baechled203a7e2005-09-06 15:19:37 -0700182
183struct saa7191_status {
Ladislav Michla637a112005-09-01 15:07:34 +0000184 /* 0=no signal, 1=signal detected */
Ralf Baechled203a7e2005-09-06 15:19:37 -0700185 int signal;
186 /* 0=50hz (pal) signal, 1=60hz (ntsc) signal */
Ladislav Michla637a112005-09-01 15:07:34 +0000187 int signal_60hz;
Ralf Baechled203a7e2005-09-06 15:19:37 -0700188 /* 0=no color detected, 1=color detected */
189 int color;
190
191 /* current SAA7191_INPUT_ */
192 int input;
193 /* current SAA7191_NORM_ */
194 int norm;
195};
196
Ladislav Michla637a112005-09-01 15:07:34 +0000197#define SAA7191_BANDPASS_MIN 0x00
198#define SAA7191_BANDPASS_MAX 0x03
199#define SAA7191_BANDPASS_DEFAULT 0x00
Ralf Baechled203a7e2005-09-06 15:19:37 -0700200
Ladislav Michla637a112005-09-01 15:07:34 +0000201#define SAA7191_BANDPASS_WEIGHT_MIN 0x00
202#define SAA7191_BANDPASS_WEIGHT_MAX 0x03
203#define SAA7191_BANDPASS_WEIGHT_DEFAULT 0x01
204
205#define SAA7191_CORING_MIN 0x00
206#define SAA7191_CORING_MAX 0x03
207#define SAA7191_CORING_DEFAULT 0x00
208
209#define SAA7191_HUE_MIN 0x00
210#define SAA7191_HUE_MAX 0xff
211#define SAA7191_HUE_DEFAULT 0x80
212
213#define SAA7191_VTRC_MIN 0x00
214#define SAA7191_VTRC_MAX 0x01
215#define SAA7191_VTRC_DEFAULT 0x00
216
217#define SAA7191_FORCE_COLOUR_MIN 0x00
218#define SAA7191_FORCE_COLOUR_MAX 0x01
219#define SAA7191_FORCE_COLOUR_DEFAULT 0x00
220
221#define SAA7191_CHROMA_GAIN_MIN 0x00
222#define SAA7191_CHROMA_GAIN_MAX 0x03
223#define SAA7191_CHROMA_GAIN_DEFAULT 0x00
224
225#define SAA7191_LUMA_DELAY_MIN -0x04
226#define SAA7191_LUMA_DELAY_MAX 0x03
227#define SAA7191_LUMA_DELAY_DEFAULT 0x01
228
229#define SAA7191_VNR_MIN 0x00
230#define SAA7191_VNR_MAX 0x03
231#define SAA7191_VNR_DEFAULT 0x00
232
Hans Verkuilcf4e9482009-02-27 09:05:10 -0300233#define SAA7191_CONTROL_BANDPASS (V4L2_CID_PRIVATE_BASE + 0)
234#define SAA7191_CONTROL_BANDPASS_WEIGHT (V4L2_CID_PRIVATE_BASE + 1)
235#define SAA7191_CONTROL_CORING (V4L2_CID_PRIVATE_BASE + 2)
236#define SAA7191_CONTROL_FORCE_COLOUR (V4L2_CID_PRIVATE_BASE + 3)
237#define SAA7191_CONTROL_CHROMA_GAIN (V4L2_CID_PRIVATE_BASE + 4)
238#define SAA7191_CONTROL_VTRC (V4L2_CID_PRIVATE_BASE + 5)
239#define SAA7191_CONTROL_LUMA_DELAY (V4L2_CID_PRIVATE_BASE + 6)
240#define SAA7191_CONTROL_VNR (V4L2_CID_PRIVATE_BASE + 7)
Ralf Baechled203a7e2005-09-06 15:19:37 -0700241
242#define DECODER_SAA7191_GET_STATUS _IOR('d', 195, struct saa7191_status)
243#define DECODER_SAA7191_SET_NORM _IOW('d', 196, int)
Ralf Baechled203a7e2005-09-06 15:19:37 -0700244
245#endif