blob: c299392716af2c02dd503a797112e03a01f489c7 [file] [log] [blame]
Guenter Roeck03e9bd82011-07-08 10:43:57 -07001/*
2 * Hardware monitoring driver for LM25066 / LM5064 / LM5066
3 *
4 * Copyright (c) 2011 Ericsson AB.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/err.h>
25#include <linux/slab.h>
26#include <linux/i2c.h>
27#include "pmbus.h"
28
29enum chips { lm25066, lm5064, lm5066 };
30
31#define LM25066_READ_VAUX 0xd0
32#define LM25066_MFR_READ_IIN 0xd1
33#define LM25066_MFR_READ_PIN 0xd2
34#define LM25066_MFR_IIN_OC_WARN_LIMIT 0xd3
35#define LM25066_MFR_PIN_OP_WARN_LIMIT 0xd4
36#define LM25066_READ_PIN_PEAK 0xd5
37#define LM25066_CLEAR_PIN_PEAK 0xd6
38#define LM25066_DEVICE_SETUP 0xd9
39#define LM25066_READ_AVG_VIN 0xdc
40#define LM25066_READ_AVG_VOUT 0xdd
41#define LM25066_READ_AVG_IIN 0xde
42#define LM25066_READ_AVG_PIN 0xdf
43
44#define LM25066_DEV_SETUP_CL (1 << 4) /* Current limit */
45
46struct lm25066_data {
47 int id;
48 struct pmbus_driver_info info;
49};
50
51#define to_lm25066_data(x) container_of(x, struct lm25066_data, info)
52
53static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
54{
55 const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
56 const struct lm25066_data *data = to_lm25066_data(info);
57 int ret;
58
59 if (page > 1)
Guenter Roeck179144a2011-09-01 08:34:31 -070060 return -ENXIO;
Guenter Roeck03e9bd82011-07-08 10:43:57 -070061
62 /* Map READ_VAUX into READ_VOUT register on page 1 */
63 if (page == 1) {
64 switch (reg) {
65 case PMBUS_READ_VOUT:
66 ret = pmbus_read_word_data(client, 0,
67 LM25066_READ_VAUX);
68 if (ret < 0)
69 break;
70 /* Adjust returned value to match VOUT coefficients */
71 switch (data->id) {
72 case lm25066:
73 /* VOUT: 4.54 mV VAUX: 283.2 uV LSB */
74 ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
75 break;
76 case lm5064:
77 /* VOUT: 4.53 mV VAUX: 700 uV LSB */
78 ret = DIV_ROUND_CLOSEST(ret * 70, 453);
79 break;
80 case lm5066:
81 /* VOUT: 2.18 mV VAUX: 725 uV LSB */
82 ret = DIV_ROUND_CLOSEST(ret * 725, 2180);
83 break;
84 }
85 break;
86 default:
87 /* No other valid registers on page 1 */
Guenter Roeck179144a2011-09-01 08:34:31 -070088 ret = -ENXIO;
Guenter Roeck03e9bd82011-07-08 10:43:57 -070089 break;
90 }
91 goto done;
92 }
93
94 switch (reg) {
95 case PMBUS_READ_IIN:
96 ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN);
97 break;
98 case PMBUS_READ_PIN:
99 ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN);
100 break;
101 case PMBUS_IIN_OC_WARN_LIMIT:
102 ret = pmbus_read_word_data(client, 0,
103 LM25066_MFR_IIN_OC_WARN_LIMIT);
104 break;
105 case PMBUS_PIN_OP_WARN_LIMIT:
106 ret = pmbus_read_word_data(client, 0,
107 LM25066_MFR_PIN_OP_WARN_LIMIT);
108 break;
109 case PMBUS_VIRT_READ_VIN_AVG:
110 ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN);
111 break;
112 case PMBUS_VIRT_READ_VOUT_AVG:
113 ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT);
114 break;
115 case PMBUS_VIRT_READ_IIN_AVG:
116 ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN);
117 break;
118 case PMBUS_VIRT_READ_PIN_AVG:
119 ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN);
120 break;
121 case PMBUS_VIRT_READ_PIN_MAX:
122 ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK);
123 break;
124 case PMBUS_VIRT_RESET_PIN_HISTORY:
125 ret = 0;
126 break;
127 default:
128 ret = -ENODATA;
129 break;
130 }
131done:
132 return ret;
133}
134
135static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
136 u16 word)
137{
138 int ret;
139
140 if (page > 1)
Guenter Roeck179144a2011-09-01 08:34:31 -0700141 return -ENXIO;
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700142
143 switch (reg) {
144 case PMBUS_IIN_OC_WARN_LIMIT:
145 ret = pmbus_write_word_data(client, 0,
146 LM25066_MFR_IIN_OC_WARN_LIMIT,
147 word);
148 break;
149 case PMBUS_PIN_OP_WARN_LIMIT:
150 ret = pmbus_write_word_data(client, 0,
151 LM25066_MFR_PIN_OP_WARN_LIMIT,
152 word);
153 break;
154 case PMBUS_VIRT_RESET_PIN_HISTORY:
155 ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
156 break;
157 default:
158 ret = -ENODATA;
159 break;
160 }
161 return ret;
162}
163
Guenter Roeck3a2805e2011-07-29 23:05:25 -0700164static int lm25066_write_byte(struct i2c_client *client, int page, u8 value)
165{
166 if (page > 1)
Guenter Roeck179144a2011-09-01 08:34:31 -0700167 return -ENXIO;
Guenter Roeck3a2805e2011-07-29 23:05:25 -0700168
Guenter Roeckda8e48a2011-07-29 22:19:39 -0700169 if (page <= 0)
170 return pmbus_write_byte(client, page, value);
Guenter Roeck3a2805e2011-07-29 23:05:25 -0700171
172 return 0;
173}
174
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700175static int lm25066_probe(struct i2c_client *client,
176 const struct i2c_device_id *id)
177{
178 int config;
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700179 struct lm25066_data *data;
180 struct pmbus_driver_info *info;
181
182 if (!i2c_check_functionality(client->adapter,
183 I2C_FUNC_SMBUS_READ_BYTE_DATA))
184 return -ENODEV;
185
Guenter Roeck8b313ca2012-02-22 08:56:43 -0800186 data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data),
187 GFP_KERNEL);
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700188 if (!data)
189 return -ENOMEM;
190
191 config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP);
Guenter Roeck8b313ca2012-02-22 08:56:43 -0800192 if (config < 0)
193 return config;
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700194
195 data->id = id->driver_data;
196 info = &data->info;
197
198 info->pages = 2;
199 info->format[PSC_VOLTAGE_IN] = direct;
200 info->format[PSC_VOLTAGE_OUT] = direct;
201 info->format[PSC_CURRENT_IN] = direct;
202 info->format[PSC_TEMPERATURE] = direct;
203 info->format[PSC_POWER] = direct;
204
205 info->m[PSC_TEMPERATURE] = 16;
206 info->b[PSC_TEMPERATURE] = 0;
207 info->R[PSC_TEMPERATURE] = 0;
208
209 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
210 | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN
211 | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
212 info->func[1] = PMBUS_HAVE_VOUT;
213
214 info->read_word_data = lm25066_read_word_data;
215 info->write_word_data = lm25066_write_word_data;
Guenter Roeck3a2805e2011-07-29 23:05:25 -0700216 info->write_byte = lm25066_write_byte;
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700217
218 switch (id->driver_data) {
219 case lm25066:
220 info->m[PSC_VOLTAGE_IN] = 22070;
221 info->b[PSC_VOLTAGE_IN] = 0;
222 info->R[PSC_VOLTAGE_IN] = -2;
223 info->m[PSC_VOLTAGE_OUT] = 22070;
224 info->b[PSC_VOLTAGE_OUT] = 0;
225 info->R[PSC_VOLTAGE_OUT] = -2;
226
227 if (config & LM25066_DEV_SETUP_CL) {
228 info->m[PSC_CURRENT_IN] = 6852;
229 info->b[PSC_CURRENT_IN] = 0;
230 info->R[PSC_CURRENT_IN] = -2;
231 info->m[PSC_POWER] = 369;
232 info->b[PSC_POWER] = 0;
233 info->R[PSC_POWER] = -2;
234 } else {
235 info->m[PSC_CURRENT_IN] = 13661;
236 info->b[PSC_CURRENT_IN] = 0;
237 info->R[PSC_CURRENT_IN] = -2;
238 info->m[PSC_POWER] = 736;
239 info->b[PSC_POWER] = 0;
240 info->R[PSC_POWER] = -2;
241 }
242 break;
243 case lm5064:
244 info->m[PSC_VOLTAGE_IN] = 22075;
245 info->b[PSC_VOLTAGE_IN] = 0;
246 info->R[PSC_VOLTAGE_IN] = -2;
247 info->m[PSC_VOLTAGE_OUT] = 22075;
248 info->b[PSC_VOLTAGE_OUT] = 0;
249 info->R[PSC_VOLTAGE_OUT] = -2;
250
251 if (config & LM25066_DEV_SETUP_CL) {
252 info->m[PSC_CURRENT_IN] = 6713;
253 info->b[PSC_CURRENT_IN] = 0;
254 info->R[PSC_CURRENT_IN] = -2;
255 info->m[PSC_POWER] = 3619;
256 info->b[PSC_POWER] = 0;
257 info->R[PSC_POWER] = -3;
258 } else {
259 info->m[PSC_CURRENT_IN] = 13426;
260 info->b[PSC_CURRENT_IN] = 0;
261 info->R[PSC_CURRENT_IN] = -2;
262 info->m[PSC_POWER] = 7238;
263 info->b[PSC_POWER] = 0;
264 info->R[PSC_POWER] = -3;
265 }
266 break;
267 case lm5066:
268 info->m[PSC_VOLTAGE_IN] = 4587;
269 info->b[PSC_VOLTAGE_IN] = 0;
270 info->R[PSC_VOLTAGE_IN] = -2;
271 info->m[PSC_VOLTAGE_OUT] = 4587;
272 info->b[PSC_VOLTAGE_OUT] = 0;
273 info->R[PSC_VOLTAGE_OUT] = -2;
274
275 if (config & LM25066_DEV_SETUP_CL) {
276 info->m[PSC_CURRENT_IN] = 10753;
277 info->b[PSC_CURRENT_IN] = 0;
278 info->R[PSC_CURRENT_IN] = -2;
279 info->m[PSC_POWER] = 1204;
280 info->b[PSC_POWER] = 0;
281 info->R[PSC_POWER] = -3;
282 } else {
283 info->m[PSC_CURRENT_IN] = 5405;
284 info->b[PSC_CURRENT_IN] = 0;
285 info->R[PSC_CURRENT_IN] = -2;
286 info->m[PSC_POWER] = 605;
287 info->b[PSC_POWER] = 0;
288 info->R[PSC_POWER] = -3;
289 }
290 break;
291 default:
Guenter Roeck8b313ca2012-02-22 08:56:43 -0800292 return -ENODEV;
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700293 }
294
Guenter Roeck8b313ca2012-02-22 08:56:43 -0800295 return pmbus_do_probe(client, id, info);
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700296}
297
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700298static const struct i2c_device_id lm25066_id[] = {
299 {"lm25066", lm25066},
300 {"lm5064", lm5064},
301 {"lm5066", lm5066},
302 { }
303};
304
305MODULE_DEVICE_TABLE(i2c, lm25066_id);
306
307/* This is the driver that will be inserted */
308static struct i2c_driver lm25066_driver = {
309 .driver = {
310 .name = "lm25066",
311 },
312 .probe = lm25066_probe,
Guenter Roeckdd285ad2012-02-22 08:56:44 -0800313 .remove = pmbus_do_remove,
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700314 .id_table = lm25066_id,
315};
316
Axel Linf0967ee2012-01-20 15:38:18 +0800317module_i2c_driver(lm25066_driver);
Guenter Roeck03e9bd82011-07-08 10:43:57 -0700318
319MODULE_AUTHOR("Guenter Roeck");
320MODULE_DESCRIPTION("PMBus driver for LM25066/LM5064/LM5066");
321MODULE_LICENSE("GPL");