blob: 649c3943d4312df72b154cc5121451b07dc04b41 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * drivers/video/geode/video_cs5530.c
3 * -- CS5530 video device
4 *
5 * Copyright (C) 2005 Arcom Control Systems Ltd.
6 *
7 * Based on AMD's original 2.4 driver:
8 * Copyright (C) 2004 Advanced Micro Devices, Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 */
15#include <linux/fb.h>
16#include <linux/delay.h>
17#include <asm/io.h>
18#include <asm/delay.h>
19
20#include "geodefb.h"
21#include "video_cs5530.h"
22
23/*
24 * CS5530 PLL table. This maps pixclocks to the appropriate PLL register
25 * value.
26 */
27struct cs5530_pll_entry {
28 long pixclock; /* ps */
29 u32 pll_value;
30};
31
32static const struct cs5530_pll_entry cs5530_pll_table[] = {
33 { 39721, 0x31C45801, }, /* 25.1750 MHz */
34 { 35308, 0x20E36802, }, /* 28.3220 */
35 { 31746, 0x33915801, }, /* 31.5000 */
36 { 27777, 0x31EC4801, }, /* 36.0000 */
37 { 26666, 0x21E22801, }, /* 37.5000 */
38 { 25000, 0x33088801, }, /* 40.0000 */
39 { 22271, 0x33E22801, }, /* 44.9000 */
40 { 20202, 0x336C4801, }, /* 49.5000 */
41 { 20000, 0x23088801, }, /* 50.0000 */
42 { 19860, 0x23088801, }, /* 50.3500 */
43 { 18518, 0x3708A801, }, /* 54.0000 */
44 { 17777, 0x23E36802, }, /* 56.2500 */
45 { 17733, 0x23E36802, }, /* 56.3916 */
46 { 17653, 0x23E36802, }, /* 56.6444 */
47 { 16949, 0x37C45801, }, /* 59.0000 */
48 { 15873, 0x23EC4801, }, /* 63.0000 */
49 { 15384, 0x37911801, }, /* 65.0000 */
50 { 14814, 0x37963803, }, /* 67.5000 */
51 { 14124, 0x37058803, }, /* 70.8000 */
52 { 13888, 0x3710C805, }, /* 72.0000 */
53 { 13333, 0x37E22801, }, /* 75.0000 */
54 { 12698, 0x27915801, }, /* 78.7500 */
55 { 12500, 0x37D8D802, }, /* 80.0000 */
56 { 11135, 0x27588802, }, /* 89.8000 */
57 { 10582, 0x27EC4802, }, /* 94.5000 */
58 { 10101, 0x27AC6803, }, /* 99.0000 */
59 { 10000, 0x27088801, }, /* 100.0000 */
60 { 9259, 0x2710C805, }, /* 108.0000 */
61 { 8888, 0x27E36802, }, /* 112.5000 */
62 { 7692, 0x27C58803, }, /* 130.0000 */
63 { 7407, 0x27316803, }, /* 135.0000 */
64 { 6349, 0x2F915801, }, /* 157.5000 */
65 { 6172, 0x2F08A801, }, /* 162.0000 */
66 { 5714, 0x2FB11802, }, /* 175.0000 */
67 { 5291, 0x2FEC4802, }, /* 189.0000 */
68 { 4950, 0x2F963803, }, /* 202.0000 */
69 { 4310, 0x2FB1B802, }, /* 232.0000 */
70};
71
Linus Torvalds1da177e2005-04-16 15:20:36 -070072static void cs5530_set_dclk_frequency(struct fb_info *info)
73{
74 struct geodefb_par *par = info->par;
75 int i;
76 u32 value;
77 long min, diff;
78
79 /* Search the table for the closest pixclock. */
80 value = cs5530_pll_table[0].pll_value;
81 min = cs5530_pll_table[0].pixclock - info->var.pixclock;
82 if (min < 0) min = -min;
David Vrabel53eed4e2005-09-09 13:04:32 -070083 for (i = 1; i < ARRAY_SIZE(cs5530_pll_table); i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -070084 diff = cs5530_pll_table[i].pixclock - info->var.pixclock;
85 if (diff < 0L) diff = -diff;
86 if (diff < min) {
87 min = diff;
88 value = cs5530_pll_table[i].pll_value;
89 }
90 }
91
92 writel(value, par->vid_regs + CS5530_DOT_CLK_CONFIG);
93 writel(value | 0x80000100, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* set reset and bypass */
94 udelay(500); /* wait for PLL to settle */
95 writel(value & 0x7FFFFFFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear reset */
96 writel(value & 0x7FFFFEFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear bypass */
97}
98
99static void cs5530_configure_display(struct fb_info *info)
100{
101 struct geodefb_par *par = info->par;
102 u32 dcfg;
103
104 dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG);
105
106 /* Clear bits from existing mode. */
107 dcfg &= ~(CS5530_DCFG_CRT_SYNC_SKW_MASK | CS5530_DCFG_PWR_SEQ_DLY_MASK
108 | CS5530_DCFG_CRT_HSYNC_POL | CS5530_DCFG_CRT_VSYNC_POL
109 | CS5530_DCFG_FP_PWR_EN | CS5530_DCFG_FP_DATA_EN
110 | CS5530_DCFG_DAC_PWR_EN | CS5530_DCFG_VSYNC_EN
111 | CS5530_DCFG_HSYNC_EN);
112
113 /* Set default sync skew and power sequence delays. */
114 dcfg |= (CS5530_DCFG_CRT_SYNC_SKW_INIT | CS5530_DCFG_PWR_SEQ_DLY_INIT
115 | CS5530_DCFG_GV_PAL_BYP);
116
117 /* Enable DACs, hsync and vsync for CRTs */
118 if (par->enable_crt) {
119 dcfg |= CS5530_DCFG_DAC_PWR_EN;
120 dcfg |= CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN;
121 }
122 /* Enable panel power and data if using a flat panel. */
123 if (par->panel_x > 0) {
124 dcfg |= CS5530_DCFG_FP_PWR_EN;
125 dcfg |= CS5530_DCFG_FP_DATA_EN;
126 }
127
128 /* Sync polarities. */
129 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
130 dcfg |= CS5530_DCFG_CRT_HSYNC_POL;
131 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
132 dcfg |= CS5530_DCFG_CRT_VSYNC_POL;
133
134 writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG);
135}
136
137static int cs5530_blank_display(struct fb_info *info, int blank_mode)
138{
139 struct geodefb_par *par = info->par;
140 u32 dcfg;
141 int blank, hsync, vsync;
142
143 switch (blank_mode) {
144 case FB_BLANK_UNBLANK:
145 blank = 0; hsync = 1; vsync = 1;
146 break;
147 case FB_BLANK_NORMAL:
148 blank = 1; hsync = 1; vsync = 1;
149 break;
150 case FB_BLANK_VSYNC_SUSPEND:
151 blank = 1; hsync = 1; vsync = 0;
152 break;
153 case FB_BLANK_HSYNC_SUSPEND:
154 blank = 1; hsync = 0; vsync = 1;
155 break;
156 case FB_BLANK_POWERDOWN:
157 blank = 1; hsync = 0; vsync = 0;
158 break;
159 default:
160 return -EINVAL;
161 }
162
163 dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG);
164
165 dcfg &= ~(CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN
166 | CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN
167 | CS5530_DCFG_FP_DATA_EN | CS5530_DCFG_FP_PWR_EN);
168
169 if (par->enable_crt) {
170 if (!blank)
171 dcfg |= CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN;
172 if (hsync)
173 dcfg |= CS5530_DCFG_HSYNC_EN;
174 if (vsync)
175 dcfg |= CS5530_DCFG_VSYNC_EN;
176 }
177 if (par->panel_x > 0) {
178 if (!blank)
179 dcfg |= CS5530_DCFG_FP_DATA_EN;
180 if (hsync && vsync)
181 dcfg |= CS5530_DCFG_FP_PWR_EN;
182 }
183
184 writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG);
185
186 return 0;
187}
188
189struct geode_vid_ops cs5530_vid_ops = {
190 .set_dclk = cs5530_set_dclk_frequency,
191 .configure_display = cs5530_configure_display,
192 .blank_display = cs5530_blank_display,
193};