blob: 8587401311155dd5abcb9e0bde00ed6e8a3493c2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Paul Fulghum7f3edb92005-09-09 13:02:14 -07002 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Device driver for Microgate SyncLink Multiport
5 * high speed multiprotocol serial adapter.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 * This code is released under the GNU General Public License (GPL)
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29#if defined(__i386__)
30# define BREAKPOINT() asm(" int $3");
31#else
32# define BREAKPOINT() { }
33#endif
34
35#define MAX_DEVICES 12
36
37#include <linux/config.h>
38#include <linux/module.h>
39#include <linux/errno.h>
40#include <linux/signal.h>
41#include <linux/sched.h>
42#include <linux/timer.h>
43#include <linux/interrupt.h>
44#include <linux/pci.h>
45#include <linux/tty.h>
46#include <linux/tty_flip.h>
47#include <linux/serial.h>
48#include <linux/major.h>
49#include <linux/string.h>
50#include <linux/fcntl.h>
51#include <linux/ptrace.h>
52#include <linux/ioport.h>
53#include <linux/mm.h>
54#include <linux/slab.h>
55#include <linux/netdevice.h>
56#include <linux/vmalloc.h>
57#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070058#include <linux/delay.h>
59#include <linux/ioctl.h>
60
61#include <asm/system.h>
62#include <asm/io.h>
63#include <asm/irq.h>
64#include <asm/dma.h>
65#include <linux/bitops.h>
66#include <asm/types.h>
67#include <linux/termios.h>
68#include <linux/workqueue.h>
69#include <linux/hdlc.h>
70
71#ifdef CONFIG_HDLC_MODULE
72#define CONFIG_HDLC 1
73#endif
74
75#define GET_USER(error,value,addr) error = get_user(value,addr)
76#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
77#define PUT_USER(error,value,addr) error = put_user(value,addr)
78#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
79
80#include <asm/uaccess.h>
81
82#include "linux/synclink.h"
83
84static MGSL_PARAMS default_params = {
85 MGSL_MODE_HDLC, /* unsigned long mode */
86 0, /* unsigned char loopback; */
87 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
88 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
89 0, /* unsigned long clock_speed; */
90 0xff, /* unsigned char addr_filter; */
91 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
92 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
93 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
94 9600, /* unsigned long data_rate; */
95 8, /* unsigned char data_bits; */
96 1, /* unsigned char stop_bits; */
97 ASYNC_PARITY_NONE /* unsigned char parity; */
98};
99
100/* size in bytes of DMA data buffers */
101#define SCABUFSIZE 1024
102#define SCA_MEM_SIZE 0x40000
103#define SCA_BASE_SIZE 512
104#define SCA_REG_SIZE 16
105#define SCA_MAX_PORTS 4
106#define SCAMAXDESC 128
107
108#define BUFFERLISTSIZE 4096
109
110/* SCA-I style DMA buffer descriptor */
111typedef struct _SCADESC
112{
113 u16 next; /* lower l6 bits of next descriptor addr */
114 u16 buf_ptr; /* lower 16 bits of buffer addr */
115 u8 buf_base; /* upper 8 bits of buffer addr */
116 u8 pad1;
117 u16 length; /* length of buffer */
118 u8 status; /* status of buffer */
119 u8 pad2;
120} SCADESC, *PSCADESC;
121
122typedef struct _SCADESC_EX
123{
124 /* device driver bookkeeping section */
125 char *virt_addr; /* virtual address of data buffer */
126 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
127} SCADESC_EX, *PSCADESC_EX;
128
129/* The queue of BH actions to be performed */
130
131#define BH_RECEIVE 1
132#define BH_TRANSMIT 2
133#define BH_STATUS 4
134
135#define IO_PIN_SHUTDOWN_LIMIT 100
136
137#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
138
139struct _input_signal_events {
140 int ri_up;
141 int ri_down;
142 int dsr_up;
143 int dsr_down;
144 int dcd_up;
145 int dcd_down;
146 int cts_up;
147 int cts_down;
148};
149
150/*
151 * Device instance data structure
152 */
153typedef struct _synclinkmp_info {
154 void *if_ptr; /* General purpose pointer (used by SPPP) */
155 int magic;
156 int flags;
157 int count; /* count of opens */
158 int line;
159 unsigned short close_delay;
160 unsigned short closing_wait; /* time to wait before closing */
161
162 struct mgsl_icount icount;
163
164 struct tty_struct *tty;
165 int timeout;
166 int x_char; /* xon/xoff character */
167 int blocked_open; /* # of blocked opens */
168 u16 read_status_mask1; /* break detection (SR1 indications) */
169 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
170 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
171 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
172 unsigned char *tx_buf;
173 int tx_put;
174 int tx_get;
175 int tx_count;
176
177 wait_queue_head_t open_wait;
178 wait_queue_head_t close_wait;
179
180 wait_queue_head_t status_event_wait_q;
181 wait_queue_head_t event_wait_q;
182 struct timer_list tx_timer; /* HDLC transmit timeout timer */
183 struct _synclinkmp_info *next_device; /* device list link */
184 struct timer_list status_timer; /* input signal status check timer */
185
186 spinlock_t lock; /* spinlock for synchronizing with ISR */
187 struct work_struct task; /* task structure for scheduling bh */
188
189 u32 max_frame_size; /* as set by device config */
190
191 u32 pending_bh;
192
193 int bh_running; /* Protection from multiple */
194 int isr_overflow;
195 int bh_requested;
196
197 int dcd_chkcount; /* check counts to prevent */
198 int cts_chkcount; /* too many IRQs if a signal */
199 int dsr_chkcount; /* is floating */
200 int ri_chkcount;
201
202 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
203 unsigned long buffer_list_phys;
204
205 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
206 SCADESC *rx_buf_list; /* list of receive buffer entries */
207 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
208 unsigned int current_rx_buf;
209
210 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
211 SCADESC *tx_buf_list; /* list of transmit buffer entries */
212 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
213 unsigned int last_tx_buf;
214
215 unsigned char *tmp_rx_buf;
216 unsigned int tmp_rx_buf_count;
217
218 int rx_enabled;
219 int rx_overflow;
220
221 int tx_enabled;
222 int tx_active;
223 u32 idle_mode;
224
225 unsigned char ie0_value;
226 unsigned char ie1_value;
227 unsigned char ie2_value;
228 unsigned char ctrlreg_value;
229 unsigned char old_signals;
230
231 char device_name[25]; /* device instance name */
232
233 int port_count;
234 int adapter_num;
235 int port_num;
236
237 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
238
239 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
240
241 unsigned int irq_level; /* interrupt level */
242 unsigned long irq_flags;
243 int irq_requested; /* nonzero if IRQ requested */
244
245 MGSL_PARAMS params; /* communications parameters */
246
247 unsigned char serial_signals; /* current serial signal states */
248
249 int irq_occurred; /* for diagnostics use */
250 unsigned int init_error; /* Initialization startup error */
251
252 u32 last_mem_alloc;
253 unsigned char* memory_base; /* shared memory address (PCI only) */
254 u32 phys_memory_base;
255 int shared_mem_requested;
256
257 unsigned char* sca_base; /* HD64570 SCA Memory address */
258 u32 phys_sca_base;
259 u32 sca_offset;
260 int sca_base_requested;
261
262 unsigned char* lcr_base; /* local config registers (PCI only) */
263 u32 phys_lcr_base;
264 u32 lcr_offset;
265 int lcr_mem_requested;
266
267 unsigned char* statctrl_base; /* status/control register memory */
268 u32 phys_statctrl_base;
269 u32 statctrl_offset;
270 int sca_statctrl_requested;
271
272 u32 misc_ctrl_value;
273 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
274 char char_buf[MAX_ASYNC_BUFFER_SIZE];
275 BOOLEAN drop_rts_on_tx_done;
276
277 struct _input_signal_events input_signal_events;
278
279 /* SPPP/Cisco HDLC device parts */
280 int netcount;
281 int dosyncppp;
282 spinlock_t netlock;
283
284#ifdef CONFIG_HDLC
285 struct net_device *netdev;
286#endif
287
288} SLMP_INFO;
289
290#define MGSL_MAGIC 0x5401
291
292/*
293 * define serial signal status change macros
294 */
295#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
296#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
297#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
298#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
299
300/* Common Register macros */
301#define LPR 0x00
302#define PABR0 0x02
303#define PABR1 0x03
304#define WCRL 0x04
305#define WCRM 0x05
306#define WCRH 0x06
307#define DPCR 0x08
308#define DMER 0x09
309#define ISR0 0x10
310#define ISR1 0x11
311#define ISR2 0x12
312#define IER0 0x14
313#define IER1 0x15
314#define IER2 0x16
315#define ITCR 0x18
316#define INTVR 0x1a
317#define IMVR 0x1c
318
319/* MSCI Register macros */
320#define TRB 0x20
321#define TRBL 0x20
322#define TRBH 0x21
323#define SR0 0x22
324#define SR1 0x23
325#define SR2 0x24
326#define SR3 0x25
327#define FST 0x26
328#define IE0 0x28
329#define IE1 0x29
330#define IE2 0x2a
331#define FIE 0x2b
332#define CMD 0x2c
333#define MD0 0x2e
334#define MD1 0x2f
335#define MD2 0x30
336#define CTL 0x31
337#define SA0 0x32
338#define SA1 0x33
339#define IDL 0x34
340#define TMC 0x35
341#define RXS 0x36
342#define TXS 0x37
343#define TRC0 0x38
344#define TRC1 0x39
345#define RRC 0x3a
346#define CST0 0x3c
347#define CST1 0x3d
348
349/* Timer Register Macros */
350#define TCNT 0x60
351#define TCNTL 0x60
352#define TCNTH 0x61
353#define TCONR 0x62
354#define TCONRL 0x62
355#define TCONRH 0x63
356#define TMCS 0x64
357#define TEPR 0x65
358
359/* DMA Controller Register macros */
360#define DARL 0x80
361#define DARH 0x81
362#define DARB 0x82
363#define BAR 0x80
364#define BARL 0x80
365#define BARH 0x81
366#define BARB 0x82
367#define SAR 0x84
368#define SARL 0x84
369#define SARH 0x85
370#define SARB 0x86
371#define CPB 0x86
372#define CDA 0x88
373#define CDAL 0x88
374#define CDAH 0x89
375#define EDA 0x8a
376#define EDAL 0x8a
377#define EDAH 0x8b
378#define BFL 0x8c
379#define BFLL 0x8c
380#define BFLH 0x8d
381#define BCR 0x8e
382#define BCRL 0x8e
383#define BCRH 0x8f
384#define DSR 0x90
385#define DMR 0x91
386#define FCT 0x93
387#define DIR 0x94
388#define DCMD 0x95
389
390/* combine with timer or DMA register address */
391#define TIMER0 0x00
392#define TIMER1 0x08
393#define TIMER2 0x10
394#define TIMER3 0x18
395#define RXDMA 0x00
396#define TXDMA 0x20
397
398/* SCA Command Codes */
399#define NOOP 0x00
400#define TXRESET 0x01
401#define TXENABLE 0x02
402#define TXDISABLE 0x03
403#define TXCRCINIT 0x04
404#define TXCRCEXCL 0x05
405#define TXEOM 0x06
406#define TXABORT 0x07
407#define MPON 0x08
408#define TXBUFCLR 0x09
409#define RXRESET 0x11
410#define RXENABLE 0x12
411#define RXDISABLE 0x13
412#define RXCRCINIT 0x14
413#define RXREJECT 0x15
414#define SEARCHMP 0x16
415#define RXCRCEXCL 0x17
416#define RXCRCCALC 0x18
417#define CHRESET 0x21
418#define HUNT 0x31
419
420/* DMA command codes */
421#define SWABORT 0x01
422#define FEICLEAR 0x02
423
424/* IE0 */
425#define TXINTE BIT7
426#define RXINTE BIT6
427#define TXRDYE BIT1
428#define RXRDYE BIT0
429
430/* IE1 & SR1 */
431#define UDRN BIT7
432#define IDLE BIT6
433#define SYNCD BIT4
434#define FLGD BIT4
435#define CCTS BIT3
436#define CDCD BIT2
437#define BRKD BIT1
438#define ABTD BIT1
439#define GAPD BIT1
440#define BRKE BIT0
441#define IDLD BIT0
442
443/* IE2 & SR2 */
444#define EOM BIT7
445#define PMP BIT6
446#define SHRT BIT6
447#define PE BIT5
448#define ABT BIT5
449#define FRME BIT4
450#define RBIT BIT4
451#define OVRN BIT3
452#define CRCE BIT2
453
454
455/*
456 * Global linked list of SyncLink devices
457 */
458static SLMP_INFO *synclinkmp_device_list = NULL;
459static int synclinkmp_adapter_count = -1;
460static int synclinkmp_device_count = 0;
461
462/*
463 * Set this param to non-zero to load eax with the
464 * .text section address and breakpoint on module load.
465 * This is useful for use with gdb and add-symbol-file command.
466 */
467static int break_on_load=0;
468
469/*
470 * Driver major number, defaults to zero to get auto
471 * assigned major number. May be forced as module parameter.
472 */
473static int ttymajor=0;
474
475/*
476 * Array of user specified options for ISA adapters.
477 */
478static int debug_level = 0;
479static int maxframe[MAX_DEVICES] = {0,};
480static int dosyncppp[MAX_DEVICES] = {0,};
481
482module_param(break_on_load, bool, 0);
483module_param(ttymajor, int, 0);
484module_param(debug_level, int, 0);
485module_param_array(maxframe, int, NULL, 0);
486module_param_array(dosyncppp, int, NULL, 0);
487
488static char *driver_name = "SyncLink MultiPort driver";
Paul Fulghum7f3edb92005-09-09 13:02:14 -0700489static char *driver_version = "$Revision: 4.38 $";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490
491static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
492static void synclinkmp_remove_one(struct pci_dev *dev);
493
494static struct pci_device_id synclinkmp_pci_tbl[] = {
495 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
496 { 0, }, /* terminate list */
497};
498MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
499
500MODULE_LICENSE("GPL");
501
502static struct pci_driver synclinkmp_pci_driver = {
503 .name = "synclinkmp",
504 .id_table = synclinkmp_pci_tbl,
505 .probe = synclinkmp_init_one,
506 .remove = __devexit_p(synclinkmp_remove_one),
507};
508
509
510static struct tty_driver *serial_driver;
511
512/* number of characters left in xmit buffer before we ask for more */
513#define WAKEUP_CHARS 256
514
515
516/* tty callbacks */
517
518static int open(struct tty_struct *tty, struct file * filp);
519static void close(struct tty_struct *tty, struct file * filp);
520static void hangup(struct tty_struct *tty);
521static void set_termios(struct tty_struct *tty, struct termios *old_termios);
522
523static int write(struct tty_struct *tty, const unsigned char *buf, int count);
524static void put_char(struct tty_struct *tty, unsigned char ch);
525static void send_xchar(struct tty_struct *tty, char ch);
526static void wait_until_sent(struct tty_struct *tty, int timeout);
527static int write_room(struct tty_struct *tty);
528static void flush_chars(struct tty_struct *tty);
529static void flush_buffer(struct tty_struct *tty);
530static void tx_hold(struct tty_struct *tty);
531static void tx_release(struct tty_struct *tty);
532
533static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
534static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
535static int chars_in_buffer(struct tty_struct *tty);
536static void throttle(struct tty_struct * tty);
537static void unthrottle(struct tty_struct * tty);
538static void set_break(struct tty_struct *tty, int break_state);
539
540#ifdef CONFIG_HDLC
541#define dev_to_port(D) (dev_to_hdlc(D)->priv)
542static void hdlcdev_tx_done(SLMP_INFO *info);
543static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
544static int hdlcdev_init(SLMP_INFO *info);
545static void hdlcdev_exit(SLMP_INFO *info);
546#endif
547
548/* ioctl handlers */
549
550static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
551static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
552static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
553static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
554static int set_txidle(SLMP_INFO *info, int idle_mode);
555static int tx_enable(SLMP_INFO *info, int enable);
556static int tx_abort(SLMP_INFO *info);
557static int rx_enable(SLMP_INFO *info, int enable);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558static int modem_input_wait(SLMP_INFO *info,int arg);
559static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
560static int tiocmget(struct tty_struct *tty, struct file *file);
561static int tiocmset(struct tty_struct *tty, struct file *file,
562 unsigned int set, unsigned int clear);
563static void set_break(struct tty_struct *tty, int break_state);
564
565static void add_device(SLMP_INFO *info);
566static void device_init(int adapter_num, struct pci_dev *pdev);
567static int claim_resources(SLMP_INFO *info);
568static void release_resources(SLMP_INFO *info);
569
570static int startup(SLMP_INFO *info);
571static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
572static void shutdown(SLMP_INFO *info);
573static void program_hw(SLMP_INFO *info);
574static void change_params(SLMP_INFO *info);
575
576static int init_adapter(SLMP_INFO *info);
577static int register_test(SLMP_INFO *info);
578static int irq_test(SLMP_INFO *info);
579static int loopback_test(SLMP_INFO *info);
580static int adapter_test(SLMP_INFO *info);
581static int memory_test(SLMP_INFO *info);
582
583static void reset_adapter(SLMP_INFO *info);
584static void reset_port(SLMP_INFO *info);
585static void async_mode(SLMP_INFO *info);
586static void hdlc_mode(SLMP_INFO *info);
587
588static void rx_stop(SLMP_INFO *info);
589static void rx_start(SLMP_INFO *info);
590static void rx_reset_buffers(SLMP_INFO *info);
591static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
592static int rx_get_frame(SLMP_INFO *info);
593
594static void tx_start(SLMP_INFO *info);
595static void tx_stop(SLMP_INFO *info);
596static void tx_load_fifo(SLMP_INFO *info);
597static void tx_set_idle(SLMP_INFO *info);
598static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
599
600static void get_signals(SLMP_INFO *info);
601static void set_signals(SLMP_INFO *info);
602static void enable_loopback(SLMP_INFO *info, int enable);
603static void set_rate(SLMP_INFO *info, u32 data_rate);
604
605static int bh_action(SLMP_INFO *info);
606static void bh_handler(void* Context);
607static void bh_receive(SLMP_INFO *info);
608static void bh_transmit(SLMP_INFO *info);
609static void bh_status(SLMP_INFO *info);
610static void isr_timer(SLMP_INFO *info);
611static void isr_rxint(SLMP_INFO *info);
612static void isr_rxrdy(SLMP_INFO *info);
613static void isr_txint(SLMP_INFO *info);
614static void isr_txrdy(SLMP_INFO *info);
615static void isr_rxdmaok(SLMP_INFO *info);
616static void isr_rxdmaerror(SLMP_INFO *info);
617static void isr_txdmaok(SLMP_INFO *info);
618static void isr_txdmaerror(SLMP_INFO *info);
619static void isr_io_pin(SLMP_INFO *info, u16 status);
620
621static int alloc_dma_bufs(SLMP_INFO *info);
622static void free_dma_bufs(SLMP_INFO *info);
623static int alloc_buf_list(SLMP_INFO *info);
624static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
625static int alloc_tmp_rx_buf(SLMP_INFO *info);
626static void free_tmp_rx_buf(SLMP_INFO *info);
627
628static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
629static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
630static void tx_timeout(unsigned long context);
631static void status_timeout(unsigned long context);
632
633static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
634static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
635static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
636static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
637static unsigned char read_status_reg(SLMP_INFO * info);
638static void write_control_reg(SLMP_INFO * info);
639
640
641static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
642static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
643static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
644
645static u32 misc_ctrl_value = 0x007e4040;
Paul Fulghum761a4442005-09-09 13:02:15 -0700646static u32 lcr1_brdr_value = 0x00800028;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647
648static u32 read_ahead_count = 8;
649
650/* DPCR, DMA Priority Control
651 *
652 * 07..05 Not used, must be 0
653 * 04 BRC, bus release condition: 0=all transfers complete
654 * 1=release after 1 xfer on all channels
655 * 03 CCC, channel change condition: 0=every cycle
656 * 1=after each channel completes all xfers
657 * 02..00 PR<2..0>, priority 100=round robin
658 *
659 * 00000100 = 0x00
660 */
661static unsigned char dma_priority = 0x04;
662
663// Number of bytes that can be written to shared RAM
664// in a single write operation
665static u32 sca_pci_load_interval = 64;
666
667/*
668 * 1st function defined in .text section. Calling this function in
669 * init_module() followed by a breakpoint allows a remote debugger
670 * (gdb) to get the .text address for the add-symbol-file command.
671 * This allows remote debugging of dynamically loadable modules.
672 */
673static void* synclinkmp_get_text_ptr(void);
674static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
675
676static inline int sanity_check(SLMP_INFO *info,
677 char *name, const char *routine)
678{
679#ifdef SANITY_CHECK
680 static const char *badmagic =
681 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
682 static const char *badinfo =
683 "Warning: null synclinkmp_struct for (%s) in %s\n";
684
685 if (!info) {
686 printk(badinfo, name, routine);
687 return 1;
688 }
689 if (info->magic != MGSL_MAGIC) {
690 printk(badmagic, name, routine);
691 return 1;
692 }
693#else
694 if (!info)
695 return 1;
696#endif
697 return 0;
698}
699
700/**
701 * line discipline callback wrappers
702 *
703 * The wrappers maintain line discipline references
704 * while calling into the line discipline.
705 *
706 * ldisc_receive_buf - pass receive data to line discipline
707 */
708
709static void ldisc_receive_buf(struct tty_struct *tty,
710 const __u8 *data, char *flags, int count)
711{
712 struct tty_ldisc *ld;
713 if (!tty)
714 return;
715 ld = tty_ldisc_ref(tty);
716 if (ld) {
717 if (ld->receive_buf)
718 ld->receive_buf(tty, data, flags, count);
719 tty_ldisc_deref(ld);
720 }
721}
722
723/* tty callbacks */
724
725/* Called when a port is opened. Init and enable port.
726 */
727static int open(struct tty_struct *tty, struct file *filp)
728{
729 SLMP_INFO *info;
730 int retval, line;
731 unsigned long flags;
732
733 line = tty->index;
734 if ((line < 0) || (line >= synclinkmp_device_count)) {
735 printk("%s(%d): open with invalid line #%d.\n",
736 __FILE__,__LINE__,line);
737 return -ENODEV;
738 }
739
740 info = synclinkmp_device_list;
741 while(info && info->line != line)
742 info = info->next_device;
743 if (sanity_check(info, tty->name, "open"))
744 return -ENODEV;
745 if ( info->init_error ) {
746 printk("%s(%d):%s device is not allocated, init error=%d\n",
747 __FILE__,__LINE__,info->device_name,info->init_error);
748 return -ENODEV;
749 }
750
751 tty->driver_data = info;
752 info->tty = tty;
753
754 if (debug_level >= DEBUG_LEVEL_INFO)
755 printk("%s(%d):%s open(), old ref count = %d\n",
756 __FILE__,__LINE__,tty->driver->name, info->count);
757
758 /* If port is closing, signal caller to try again */
759 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
760 if (info->flags & ASYNC_CLOSING)
761 interruptible_sleep_on(&info->close_wait);
762 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
763 -EAGAIN : -ERESTARTSYS);
764 goto cleanup;
765 }
766
767 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
768
769 spin_lock_irqsave(&info->netlock, flags);
770 if (info->netcount) {
771 retval = -EBUSY;
772 spin_unlock_irqrestore(&info->netlock, flags);
773 goto cleanup;
774 }
775 info->count++;
776 spin_unlock_irqrestore(&info->netlock, flags);
777
778 if (info->count == 1) {
779 /* 1st open on this device, init hardware */
780 retval = startup(info);
781 if (retval < 0)
782 goto cleanup;
783 }
784
785 retval = block_til_ready(tty, filp, info);
786 if (retval) {
787 if (debug_level >= DEBUG_LEVEL_INFO)
788 printk("%s(%d):%s block_til_ready() returned %d\n",
789 __FILE__,__LINE__, info->device_name, retval);
790 goto cleanup;
791 }
792
793 if (debug_level >= DEBUG_LEVEL_INFO)
794 printk("%s(%d):%s open() success\n",
795 __FILE__,__LINE__, info->device_name);
796 retval = 0;
797
798cleanup:
799 if (retval) {
800 if (tty->count == 1)
801 info->tty = NULL; /* tty layer will release tty struct */
802 if(info->count)
803 info->count--;
804 }
805
806 return retval;
807}
808
809/* Called when port is closed. Wait for remaining data to be
810 * sent. Disable port and free resources.
811 */
812static void close(struct tty_struct *tty, struct file *filp)
813{
814 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
815
816 if (sanity_check(info, tty->name, "close"))
817 return;
818
819 if (debug_level >= DEBUG_LEVEL_INFO)
820 printk("%s(%d):%s close() entry, count=%d\n",
821 __FILE__,__LINE__, info->device_name, info->count);
822
823 if (!info->count)
824 return;
825
826 if (tty_hung_up_p(filp))
827 goto cleanup;
828
829 if ((tty->count == 1) && (info->count != 1)) {
830 /*
831 * tty->count is 1 and the tty structure will be freed.
832 * info->count should be one in this case.
833 * if it's not, correct it so that the port is shutdown.
834 */
835 printk("%s(%d):%s close: bad refcount; tty->count is 1, "
836 "info->count is %d\n",
837 __FILE__,__LINE__, info->device_name, info->count);
838 info->count = 1;
839 }
840
841 info->count--;
842
843 /* if at least one open remaining, leave hardware active */
844 if (info->count)
845 goto cleanup;
846
847 info->flags |= ASYNC_CLOSING;
848
849 /* set tty->closing to notify line discipline to
850 * only process XON/XOFF characters. Only the N_TTY
851 * discipline appears to use this (ppp does not).
852 */
853 tty->closing = 1;
854
855 /* wait for transmit data to clear all layers */
856
857 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
858 if (debug_level >= DEBUG_LEVEL_INFO)
859 printk("%s(%d):%s close() calling tty_wait_until_sent\n",
860 __FILE__,__LINE__, info->device_name );
861 tty_wait_until_sent(tty, info->closing_wait);
862 }
863
864 if (info->flags & ASYNC_INITIALIZED)
865 wait_until_sent(tty, info->timeout);
866
867 if (tty->driver->flush_buffer)
868 tty->driver->flush_buffer(tty);
869
870 tty_ldisc_flush(tty);
871
872 shutdown(info);
873
874 tty->closing = 0;
875 info->tty = NULL;
876
877 if (info->blocked_open) {
878 if (info->close_delay) {
879 msleep_interruptible(jiffies_to_msecs(info->close_delay));
880 }
881 wake_up_interruptible(&info->open_wait);
882 }
883
884 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
885
886 wake_up_interruptible(&info->close_wait);
887
888cleanup:
889 if (debug_level >= DEBUG_LEVEL_INFO)
890 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
891 tty->driver->name, info->count);
892}
893
894/* Called by tty_hangup() when a hangup is signaled.
895 * This is the same as closing all open descriptors for the port.
896 */
897static void hangup(struct tty_struct *tty)
898{
899 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
900
901 if (debug_level >= DEBUG_LEVEL_INFO)
902 printk("%s(%d):%s hangup()\n",
903 __FILE__,__LINE__, info->device_name );
904
905 if (sanity_check(info, tty->name, "hangup"))
906 return;
907
908 flush_buffer(tty);
909 shutdown(info);
910
911 info->count = 0;
912 info->flags &= ~ASYNC_NORMAL_ACTIVE;
913 info->tty = NULL;
914
915 wake_up_interruptible(&info->open_wait);
916}
917
918/* Set new termios settings
919 */
920static void set_termios(struct tty_struct *tty, struct termios *old_termios)
921{
922 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
923 unsigned long flags;
924
925 if (debug_level >= DEBUG_LEVEL_INFO)
926 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
927 tty->driver->name );
928
929 /* just return if nothing has changed */
930 if ((tty->termios->c_cflag == old_termios->c_cflag)
931 && (RELEVANT_IFLAG(tty->termios->c_iflag)
932 == RELEVANT_IFLAG(old_termios->c_iflag)))
933 return;
934
935 change_params(info);
936
937 /* Handle transition to B0 status */
938 if (old_termios->c_cflag & CBAUD &&
939 !(tty->termios->c_cflag & CBAUD)) {
940 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
941 spin_lock_irqsave(&info->lock,flags);
942 set_signals(info);
943 spin_unlock_irqrestore(&info->lock,flags);
944 }
945
946 /* Handle transition away from B0 status */
947 if (!(old_termios->c_cflag & CBAUD) &&
948 tty->termios->c_cflag & CBAUD) {
949 info->serial_signals |= SerialSignal_DTR;
950 if (!(tty->termios->c_cflag & CRTSCTS) ||
951 !test_bit(TTY_THROTTLED, &tty->flags)) {
952 info->serial_signals |= SerialSignal_RTS;
953 }
954 spin_lock_irqsave(&info->lock,flags);
955 set_signals(info);
956 spin_unlock_irqrestore(&info->lock,flags);
957 }
958
959 /* Handle turning off CRTSCTS */
960 if (old_termios->c_cflag & CRTSCTS &&
961 !(tty->termios->c_cflag & CRTSCTS)) {
962 tty->hw_stopped = 0;
963 tx_release(tty);
964 }
965}
966
967/* Send a block of data
968 *
969 * Arguments:
970 *
971 * tty pointer to tty information structure
972 * buf pointer to buffer containing send data
973 * count size of send data in bytes
974 *
975 * Return Value: number of characters written
976 */
977static int write(struct tty_struct *tty,
978 const unsigned char *buf, int count)
979{
980 int c, ret = 0;
981 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
982 unsigned long flags;
983
984 if (debug_level >= DEBUG_LEVEL_INFO)
985 printk("%s(%d):%s write() count=%d\n",
986 __FILE__,__LINE__,info->device_name,count);
987
988 if (sanity_check(info, tty->name, "write"))
989 goto cleanup;
990
991 if (!tty || !info->tx_buf)
992 goto cleanup;
993
994 if (info->params.mode == MGSL_MODE_HDLC) {
995 if (count > info->max_frame_size) {
996 ret = -EIO;
997 goto cleanup;
998 }
999 if (info->tx_active)
1000 goto cleanup;
1001 if (info->tx_count) {
1002 /* send accumulated data from send_char() calls */
1003 /* as frame and wait before accepting more data. */
1004 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
1005 goto start;
1006 }
1007 ret = info->tx_count = count;
1008 tx_load_dma_buffer(info, buf, count);
1009 goto start;
1010 }
1011
1012 for (;;) {
1013 c = min_t(int, count,
1014 min(info->max_frame_size - info->tx_count - 1,
1015 info->max_frame_size - info->tx_put));
1016 if (c <= 0)
1017 break;
1018
1019 memcpy(info->tx_buf + info->tx_put, buf, c);
1020
1021 spin_lock_irqsave(&info->lock,flags);
1022 info->tx_put += c;
1023 if (info->tx_put >= info->max_frame_size)
1024 info->tx_put -= info->max_frame_size;
1025 info->tx_count += c;
1026 spin_unlock_irqrestore(&info->lock,flags);
1027
1028 buf += c;
1029 count -= c;
1030 ret += c;
1031 }
1032
1033 if (info->params.mode == MGSL_MODE_HDLC) {
1034 if (count) {
1035 ret = info->tx_count = 0;
1036 goto cleanup;
1037 }
1038 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
1039 }
1040start:
1041 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1042 spin_lock_irqsave(&info->lock,flags);
1043 if (!info->tx_active)
1044 tx_start(info);
1045 spin_unlock_irqrestore(&info->lock,flags);
1046 }
1047
1048cleanup:
1049 if (debug_level >= DEBUG_LEVEL_INFO)
1050 printk( "%s(%d):%s write() returning=%d\n",
1051 __FILE__,__LINE__,info->device_name,ret);
1052 return ret;
1053}
1054
1055/* Add a character to the transmit buffer.
1056 */
1057static void put_char(struct tty_struct *tty, unsigned char ch)
1058{
1059 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1060 unsigned long flags;
1061
1062 if ( debug_level >= DEBUG_LEVEL_INFO ) {
1063 printk( "%s(%d):%s put_char(%d)\n",
1064 __FILE__,__LINE__,info->device_name,ch);
1065 }
1066
1067 if (sanity_check(info, tty->name, "put_char"))
1068 return;
1069
1070 if (!tty || !info->tx_buf)
1071 return;
1072
1073 spin_lock_irqsave(&info->lock,flags);
1074
1075 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1076 !info->tx_active ) {
1077
1078 if (info->tx_count < info->max_frame_size - 1) {
1079 info->tx_buf[info->tx_put++] = ch;
1080 if (info->tx_put >= info->max_frame_size)
1081 info->tx_put -= info->max_frame_size;
1082 info->tx_count++;
1083 }
1084 }
1085
1086 spin_unlock_irqrestore(&info->lock,flags);
1087}
1088
1089/* Send a high-priority XON/XOFF character
1090 */
1091static void send_xchar(struct tty_struct *tty, char ch)
1092{
1093 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1094 unsigned long flags;
1095
1096 if (debug_level >= DEBUG_LEVEL_INFO)
1097 printk("%s(%d):%s send_xchar(%d)\n",
1098 __FILE__,__LINE__, info->device_name, ch );
1099
1100 if (sanity_check(info, tty->name, "send_xchar"))
1101 return;
1102
1103 info->x_char = ch;
1104 if (ch) {
1105 /* Make sure transmit interrupts are on */
1106 spin_lock_irqsave(&info->lock,flags);
1107 if (!info->tx_enabled)
1108 tx_start(info);
1109 spin_unlock_irqrestore(&info->lock,flags);
1110 }
1111}
1112
1113/* Wait until the transmitter is empty.
1114 */
1115static void wait_until_sent(struct tty_struct *tty, int timeout)
1116{
1117 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1118 unsigned long orig_jiffies, char_time;
1119
1120 if (!info )
1121 return;
1122
1123 if (debug_level >= DEBUG_LEVEL_INFO)
1124 printk("%s(%d):%s wait_until_sent() entry\n",
1125 __FILE__,__LINE__, info->device_name );
1126
1127 if (sanity_check(info, tty->name, "wait_until_sent"))
1128 return;
1129
1130 if (!(info->flags & ASYNC_INITIALIZED))
1131 goto exit;
1132
1133 orig_jiffies = jiffies;
1134
1135 /* Set check interval to 1/5 of estimated time to
1136 * send a character, and make it at least 1. The check
1137 * interval should also be less than the timeout.
1138 * Note: use tight timings here to satisfy the NIST-PCTS.
1139 */
1140
1141 if ( info->params.data_rate ) {
1142 char_time = info->timeout/(32 * 5);
1143 if (!char_time)
1144 char_time++;
1145 } else
1146 char_time = 1;
1147
1148 if (timeout)
1149 char_time = min_t(unsigned long, char_time, timeout);
1150
1151 if ( info->params.mode == MGSL_MODE_HDLC ) {
1152 while (info->tx_active) {
1153 msleep_interruptible(jiffies_to_msecs(char_time));
1154 if (signal_pending(current))
1155 break;
1156 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1157 break;
1158 }
1159 } else {
1160 //TODO: determine if there is something similar to USC16C32
1161 // TXSTATUS_ALL_SENT status
1162 while ( info->tx_active && info->tx_enabled) {
1163 msleep_interruptible(jiffies_to_msecs(char_time));
1164 if (signal_pending(current))
1165 break;
1166 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1167 break;
1168 }
1169 }
1170
1171exit:
1172 if (debug_level >= DEBUG_LEVEL_INFO)
1173 printk("%s(%d):%s wait_until_sent() exit\n",
1174 __FILE__,__LINE__, info->device_name );
1175}
1176
1177/* Return the count of free bytes in transmit buffer
1178 */
1179static int write_room(struct tty_struct *tty)
1180{
1181 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1182 int ret;
1183
1184 if (sanity_check(info, tty->name, "write_room"))
1185 return 0;
1186
1187 if (info->params.mode == MGSL_MODE_HDLC) {
1188 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1189 } else {
1190 ret = info->max_frame_size - info->tx_count - 1;
1191 if (ret < 0)
1192 ret = 0;
1193 }
1194
1195 if (debug_level >= DEBUG_LEVEL_INFO)
1196 printk("%s(%d):%s write_room()=%d\n",
1197 __FILE__, __LINE__, info->device_name, ret);
1198
1199 return ret;
1200}
1201
1202/* enable transmitter and send remaining buffered characters
1203 */
1204static void flush_chars(struct tty_struct *tty)
1205{
1206 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1207 unsigned long flags;
1208
1209 if ( debug_level >= DEBUG_LEVEL_INFO )
1210 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1211 __FILE__,__LINE__,info->device_name,info->tx_count);
1212
1213 if (sanity_check(info, tty->name, "flush_chars"))
1214 return;
1215
1216 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1217 !info->tx_buf)
1218 return;
1219
1220 if ( debug_level >= DEBUG_LEVEL_INFO )
1221 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1222 __FILE__,__LINE__,info->device_name );
1223
1224 spin_lock_irqsave(&info->lock,flags);
1225
1226 if (!info->tx_active) {
1227 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1228 info->tx_count ) {
1229 /* operating in synchronous (frame oriented) mode */
1230 /* copy data from circular tx_buf to */
1231 /* transmit DMA buffer. */
1232 tx_load_dma_buffer(info,
1233 info->tx_buf,info->tx_count);
1234 }
1235 tx_start(info);
1236 }
1237
1238 spin_unlock_irqrestore(&info->lock,flags);
1239}
1240
1241/* Discard all data in the send buffer
1242 */
1243static void flush_buffer(struct tty_struct *tty)
1244{
1245 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1246 unsigned long flags;
1247
1248 if (debug_level >= DEBUG_LEVEL_INFO)
1249 printk("%s(%d):%s flush_buffer() entry\n",
1250 __FILE__,__LINE__, info->device_name );
1251
1252 if (sanity_check(info, tty->name, "flush_buffer"))
1253 return;
1254
1255 spin_lock_irqsave(&info->lock,flags);
1256 info->tx_count = info->tx_put = info->tx_get = 0;
1257 del_timer(&info->tx_timer);
1258 spin_unlock_irqrestore(&info->lock,flags);
1259
1260 wake_up_interruptible(&tty->write_wait);
1261 tty_wakeup(tty);
1262}
1263
1264/* throttle (stop) transmitter
1265 */
1266static void tx_hold(struct tty_struct *tty)
1267{
1268 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1269 unsigned long flags;
1270
1271 if (sanity_check(info, tty->name, "tx_hold"))
1272 return;
1273
1274 if ( debug_level >= DEBUG_LEVEL_INFO )
1275 printk("%s(%d):%s tx_hold()\n",
1276 __FILE__,__LINE__,info->device_name);
1277
1278 spin_lock_irqsave(&info->lock,flags);
1279 if (info->tx_enabled)
1280 tx_stop(info);
1281 spin_unlock_irqrestore(&info->lock,flags);
1282}
1283
1284/* release (start) transmitter
1285 */
1286static void tx_release(struct tty_struct *tty)
1287{
1288 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1289 unsigned long flags;
1290
1291 if (sanity_check(info, tty->name, "tx_release"))
1292 return;
1293
1294 if ( debug_level >= DEBUG_LEVEL_INFO )
1295 printk("%s(%d):%s tx_release()\n",
1296 __FILE__,__LINE__,info->device_name);
1297
1298 spin_lock_irqsave(&info->lock,flags);
1299 if (!info->tx_enabled)
1300 tx_start(info);
1301 spin_unlock_irqrestore(&info->lock,flags);
1302}
1303
1304/* Service an IOCTL request
1305 *
1306 * Arguments:
1307 *
1308 * tty pointer to tty instance data
1309 * file pointer to associated file object for device
1310 * cmd IOCTL command code
1311 * arg command argument/context
1312 *
1313 * Return Value: 0 if success, otherwise error code
1314 */
1315static int ioctl(struct tty_struct *tty, struct file *file,
1316 unsigned int cmd, unsigned long arg)
1317{
1318 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1319 int error;
1320 struct mgsl_icount cnow; /* kernel counter temps */
1321 struct serial_icounter_struct __user *p_cuser; /* user space */
1322 unsigned long flags;
1323 void __user *argp = (void __user *)arg;
1324
1325 if (debug_level >= DEBUG_LEVEL_INFO)
1326 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1327 info->device_name, cmd );
1328
1329 if (sanity_check(info, tty->name, "ioctl"))
1330 return -ENODEV;
1331
1332 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1333 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1334 if (tty->flags & (1 << TTY_IO_ERROR))
1335 return -EIO;
1336 }
1337
1338 switch (cmd) {
1339 case MGSL_IOCGPARAMS:
1340 return get_params(info, argp);
1341 case MGSL_IOCSPARAMS:
1342 return set_params(info, argp);
1343 case MGSL_IOCGTXIDLE:
1344 return get_txidle(info, argp);
1345 case MGSL_IOCSTXIDLE:
1346 return set_txidle(info, (int)arg);
1347 case MGSL_IOCTXENABLE:
1348 return tx_enable(info, (int)arg);
1349 case MGSL_IOCRXENABLE:
1350 return rx_enable(info, (int)arg);
1351 case MGSL_IOCTXABORT:
1352 return tx_abort(info);
1353 case MGSL_IOCGSTATS:
1354 return get_stats(info, argp);
1355 case MGSL_IOCWAITEVENT:
1356 return wait_mgsl_event(info, argp);
1357 case MGSL_IOCLOOPTXDONE:
1358 return 0; // TODO: Not supported, need to document
1359 /* Wait for modem input (DCD,RI,DSR,CTS) change
1360 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1361 */
1362 case TIOCMIWAIT:
1363 return modem_input_wait(info,(int)arg);
1364
1365 /*
1366 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1367 * Return: write counters to the user passed counter struct
1368 * NB: both 1->0 and 0->1 transitions are counted except for
1369 * RI where only 0->1 is counted.
1370 */
1371 case TIOCGICOUNT:
1372 spin_lock_irqsave(&info->lock,flags);
1373 cnow = info->icount;
1374 spin_unlock_irqrestore(&info->lock,flags);
1375 p_cuser = argp;
1376 PUT_USER(error,cnow.cts, &p_cuser->cts);
1377 if (error) return error;
1378 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
1379 if (error) return error;
1380 PUT_USER(error,cnow.rng, &p_cuser->rng);
1381 if (error) return error;
1382 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
1383 if (error) return error;
1384 PUT_USER(error,cnow.rx, &p_cuser->rx);
1385 if (error) return error;
1386 PUT_USER(error,cnow.tx, &p_cuser->tx);
1387 if (error) return error;
1388 PUT_USER(error,cnow.frame, &p_cuser->frame);
1389 if (error) return error;
1390 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
1391 if (error) return error;
1392 PUT_USER(error,cnow.parity, &p_cuser->parity);
1393 if (error) return error;
1394 PUT_USER(error,cnow.brk, &p_cuser->brk);
1395 if (error) return error;
1396 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
1397 if (error) return error;
1398 return 0;
1399 default:
1400 return -ENOIOCTLCMD;
1401 }
1402 return 0;
1403}
1404
1405/*
1406 * /proc fs routines....
1407 */
1408
1409static inline int line_info(char *buf, SLMP_INFO *info)
1410{
1411 char stat_buf[30];
1412 int ret;
1413 unsigned long flags;
1414
1415 ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1416 "\tIRQ=%d MaxFrameSize=%u\n",
1417 info->device_name,
1418 info->phys_sca_base,
1419 info->phys_memory_base,
1420 info->phys_statctrl_base,
1421 info->phys_lcr_base,
1422 info->irq_level,
1423 info->max_frame_size );
1424
1425 /* output current serial signal states */
1426 spin_lock_irqsave(&info->lock,flags);
1427 get_signals(info);
1428 spin_unlock_irqrestore(&info->lock,flags);
1429
1430 stat_buf[0] = 0;
1431 stat_buf[1] = 0;
1432 if (info->serial_signals & SerialSignal_RTS)
1433 strcat(stat_buf, "|RTS");
1434 if (info->serial_signals & SerialSignal_CTS)
1435 strcat(stat_buf, "|CTS");
1436 if (info->serial_signals & SerialSignal_DTR)
1437 strcat(stat_buf, "|DTR");
1438 if (info->serial_signals & SerialSignal_DSR)
1439 strcat(stat_buf, "|DSR");
1440 if (info->serial_signals & SerialSignal_DCD)
1441 strcat(stat_buf, "|CD");
1442 if (info->serial_signals & SerialSignal_RI)
1443 strcat(stat_buf, "|RI");
1444
1445 if (info->params.mode == MGSL_MODE_HDLC) {
1446 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1447 info->icount.txok, info->icount.rxok);
1448 if (info->icount.txunder)
1449 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1450 if (info->icount.txabort)
1451 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1452 if (info->icount.rxshort)
1453 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1454 if (info->icount.rxlong)
1455 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1456 if (info->icount.rxover)
1457 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1458 if (info->icount.rxcrc)
1459 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
1460 } else {
1461 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1462 info->icount.tx, info->icount.rx);
1463 if (info->icount.frame)
1464 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1465 if (info->icount.parity)
1466 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1467 if (info->icount.brk)
1468 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1469 if (info->icount.overrun)
1470 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1471 }
1472
1473 /* Append serial signal status to end */
1474 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1475
1476 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1477 info->tx_active,info->bh_requested,info->bh_running,
1478 info->pending_bh);
1479
1480 return ret;
1481}
1482
1483/* Called to print information about devices
1484 */
1485int read_proc(char *page, char **start, off_t off, int count,
1486 int *eof, void *data)
1487{
1488 int len = 0, l;
1489 off_t begin = 0;
1490 SLMP_INFO *info;
1491
1492 len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
1493
1494 info = synclinkmp_device_list;
1495 while( info ) {
1496 l = line_info(page + len, info);
1497 len += l;
1498 if (len+begin > off+count)
1499 goto done;
1500 if (len+begin < off) {
1501 begin += len;
1502 len = 0;
1503 }
1504 info = info->next_device;
1505 }
1506
1507 *eof = 1;
1508done:
1509 if (off >= len+begin)
1510 return 0;
1511 *start = page + (off-begin);
1512 return ((count < begin+len-off) ? count : begin+len-off);
1513}
1514
1515/* Return the count of bytes in transmit buffer
1516 */
1517static int chars_in_buffer(struct tty_struct *tty)
1518{
1519 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1520
1521 if (sanity_check(info, tty->name, "chars_in_buffer"))
1522 return 0;
1523
1524 if (debug_level >= DEBUG_LEVEL_INFO)
1525 printk("%s(%d):%s chars_in_buffer()=%d\n",
1526 __FILE__, __LINE__, info->device_name, info->tx_count);
1527
1528 return info->tx_count;
1529}
1530
1531/* Signal remote device to throttle send data (our receive data)
1532 */
1533static void throttle(struct tty_struct * tty)
1534{
1535 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1536 unsigned long flags;
1537
1538 if (debug_level >= DEBUG_LEVEL_INFO)
1539 printk("%s(%d):%s throttle() entry\n",
1540 __FILE__,__LINE__, info->device_name );
1541
1542 if (sanity_check(info, tty->name, "throttle"))
1543 return;
1544
1545 if (I_IXOFF(tty))
1546 send_xchar(tty, STOP_CHAR(tty));
1547
1548 if (tty->termios->c_cflag & CRTSCTS) {
1549 spin_lock_irqsave(&info->lock,flags);
1550 info->serial_signals &= ~SerialSignal_RTS;
1551 set_signals(info);
1552 spin_unlock_irqrestore(&info->lock,flags);
1553 }
1554}
1555
1556/* Signal remote device to stop throttling send data (our receive data)
1557 */
1558static void unthrottle(struct tty_struct * tty)
1559{
1560 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1561 unsigned long flags;
1562
1563 if (debug_level >= DEBUG_LEVEL_INFO)
1564 printk("%s(%d):%s unthrottle() entry\n",
1565 __FILE__,__LINE__, info->device_name );
1566
1567 if (sanity_check(info, tty->name, "unthrottle"))
1568 return;
1569
1570 if (I_IXOFF(tty)) {
1571 if (info->x_char)
1572 info->x_char = 0;
1573 else
1574 send_xchar(tty, START_CHAR(tty));
1575 }
1576
1577 if (tty->termios->c_cflag & CRTSCTS) {
1578 spin_lock_irqsave(&info->lock,flags);
1579 info->serial_signals |= SerialSignal_RTS;
1580 set_signals(info);
1581 spin_unlock_irqrestore(&info->lock,flags);
1582 }
1583}
1584
1585/* set or clear transmit break condition
1586 * break_state -1=set break condition, 0=clear
1587 */
1588static void set_break(struct tty_struct *tty, int break_state)
1589{
1590 unsigned char RegValue;
1591 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1592 unsigned long flags;
1593
1594 if (debug_level >= DEBUG_LEVEL_INFO)
1595 printk("%s(%d):%s set_break(%d)\n",
1596 __FILE__,__LINE__, info->device_name, break_state);
1597
1598 if (sanity_check(info, tty->name, "set_break"))
1599 return;
1600
1601 spin_lock_irqsave(&info->lock,flags);
1602 RegValue = read_reg(info, CTL);
1603 if (break_state == -1)
1604 RegValue |= BIT3;
1605 else
1606 RegValue &= ~BIT3;
1607 write_reg(info, CTL, RegValue);
1608 spin_unlock_irqrestore(&info->lock,flags);
1609}
1610
1611#ifdef CONFIG_HDLC
1612
1613/**
1614 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1615 * set encoding and frame check sequence (FCS) options
1616 *
1617 * dev pointer to network device structure
1618 * encoding serial encoding setting
1619 * parity FCS setting
1620 *
1621 * returns 0 if success, otherwise error code
1622 */
1623static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1624 unsigned short parity)
1625{
1626 SLMP_INFO *info = dev_to_port(dev);
1627 unsigned char new_encoding;
1628 unsigned short new_crctype;
1629
1630 /* return error if TTY interface open */
1631 if (info->count)
1632 return -EBUSY;
1633
1634 switch (encoding)
1635 {
1636 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1637 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1638 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1639 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1640 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1641 default: return -EINVAL;
1642 }
1643
1644 switch (parity)
1645 {
1646 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1647 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1648 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1649 default: return -EINVAL;
1650 }
1651
1652 info->params.encoding = new_encoding;
Alexey Dobriyan53b35312006-03-24 03:16:13 -08001653 info->params.crc_type = new_crctype;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001654
1655 /* if network interface up, reprogram hardware */
1656 if (info->netcount)
1657 program_hw(info);
1658
1659 return 0;
1660}
1661
1662/**
1663 * called by generic HDLC layer to send frame
1664 *
1665 * skb socket buffer containing HDLC frame
1666 * dev pointer to network device structure
1667 *
1668 * returns 0 if success, otherwise error code
1669 */
1670static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1671{
1672 SLMP_INFO *info = dev_to_port(dev);
1673 struct net_device_stats *stats = hdlc_stats(dev);
1674 unsigned long flags;
1675
1676 if (debug_level >= DEBUG_LEVEL_INFO)
1677 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1678
1679 /* stop sending until this frame completes */
1680 netif_stop_queue(dev);
1681
1682 /* copy data to device buffers */
1683 info->tx_count = skb->len;
1684 tx_load_dma_buffer(info, skb->data, skb->len);
1685
1686 /* update network statistics */
1687 stats->tx_packets++;
1688 stats->tx_bytes += skb->len;
1689
1690 /* done with socket buffer, so free it */
1691 dev_kfree_skb(skb);
1692
1693 /* save start time for transmit timeout detection */
1694 dev->trans_start = jiffies;
1695
1696 /* start hardware transmitter if necessary */
1697 spin_lock_irqsave(&info->lock,flags);
1698 if (!info->tx_active)
1699 tx_start(info);
1700 spin_unlock_irqrestore(&info->lock,flags);
1701
1702 return 0;
1703}
1704
1705/**
1706 * called by network layer when interface enabled
1707 * claim resources and initialize hardware
1708 *
1709 * dev pointer to network device structure
1710 *
1711 * returns 0 if success, otherwise error code
1712 */
1713static int hdlcdev_open(struct net_device *dev)
1714{
1715 SLMP_INFO *info = dev_to_port(dev);
1716 int rc;
1717 unsigned long flags;
1718
1719 if (debug_level >= DEBUG_LEVEL_INFO)
1720 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1721
1722 /* generic HDLC layer open processing */
1723 if ((rc = hdlc_open(dev)))
1724 return rc;
1725
1726 /* arbitrate between network and tty opens */
1727 spin_lock_irqsave(&info->netlock, flags);
1728 if (info->count != 0 || info->netcount != 0) {
1729 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1730 spin_unlock_irqrestore(&info->netlock, flags);
1731 return -EBUSY;
1732 }
1733 info->netcount=1;
1734 spin_unlock_irqrestore(&info->netlock, flags);
1735
1736 /* claim resources and init adapter */
1737 if ((rc = startup(info)) != 0) {
1738 spin_lock_irqsave(&info->netlock, flags);
1739 info->netcount=0;
1740 spin_unlock_irqrestore(&info->netlock, flags);
1741 return rc;
1742 }
1743
1744 /* assert DTR and RTS, apply hardware settings */
1745 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1746 program_hw(info);
1747
1748 /* enable network layer transmit */
1749 dev->trans_start = jiffies;
1750 netif_start_queue(dev);
1751
1752 /* inform generic HDLC layer of current DCD status */
1753 spin_lock_irqsave(&info->lock, flags);
1754 get_signals(info);
1755 spin_unlock_irqrestore(&info->lock, flags);
1756 hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev);
1757
1758 return 0;
1759}
1760
1761/**
1762 * called by network layer when interface is disabled
1763 * shutdown hardware and release resources
1764 *
1765 * dev pointer to network device structure
1766 *
1767 * returns 0 if success, otherwise error code
1768 */
1769static int hdlcdev_close(struct net_device *dev)
1770{
1771 SLMP_INFO *info = dev_to_port(dev);
1772 unsigned long flags;
1773
1774 if (debug_level >= DEBUG_LEVEL_INFO)
1775 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1776
1777 netif_stop_queue(dev);
1778
1779 /* shutdown adapter and release resources */
1780 shutdown(info);
1781
1782 hdlc_close(dev);
1783
1784 spin_lock_irqsave(&info->netlock, flags);
1785 info->netcount=0;
1786 spin_unlock_irqrestore(&info->netlock, flags);
1787
1788 return 0;
1789}
1790
1791/**
1792 * called by network layer to process IOCTL call to network device
1793 *
1794 * dev pointer to network device structure
1795 * ifr pointer to network interface request structure
1796 * cmd IOCTL command code
1797 *
1798 * returns 0 if success, otherwise error code
1799 */
1800static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1801{
1802 const size_t size = sizeof(sync_serial_settings);
1803 sync_serial_settings new_line;
1804 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1805 SLMP_INFO *info = dev_to_port(dev);
1806 unsigned int flags;
1807
1808 if (debug_level >= DEBUG_LEVEL_INFO)
1809 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1810
1811 /* return error if TTY interface open */
1812 if (info->count)
1813 return -EBUSY;
1814
1815 if (cmd != SIOCWANDEV)
1816 return hdlc_ioctl(dev, ifr, cmd);
1817
1818 switch(ifr->ifr_settings.type) {
1819 case IF_GET_IFACE: /* return current sync_serial_settings */
1820
1821 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1822 if (ifr->ifr_settings.size < size) {
1823 ifr->ifr_settings.size = size; /* data size wanted */
1824 return -ENOBUFS;
1825 }
1826
1827 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1828 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1829 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1830 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1831
1832 switch (flags){
1833 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1834 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1835 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1836 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1837 default: new_line.clock_type = CLOCK_DEFAULT;
1838 }
1839
1840 new_line.clock_rate = info->params.clock_speed;
1841 new_line.loopback = info->params.loopback ? 1:0;
1842
1843 if (copy_to_user(line, &new_line, size))
1844 return -EFAULT;
1845 return 0;
1846
1847 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1848
1849 if(!capable(CAP_NET_ADMIN))
1850 return -EPERM;
1851 if (copy_from_user(&new_line, line, size))
1852 return -EFAULT;
1853
1854 switch (new_line.clock_type)
1855 {
1856 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1857 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1858 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1859 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1860 case CLOCK_DEFAULT: flags = info->params.flags &
1861 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1862 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1863 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1864 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1865 default: return -EINVAL;
1866 }
1867
1868 if (new_line.loopback != 0 && new_line.loopback != 1)
1869 return -EINVAL;
1870
1871 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1872 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1873 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1874 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1875 info->params.flags |= flags;
1876
1877 info->params.loopback = new_line.loopback;
1878
1879 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1880 info->params.clock_speed = new_line.clock_rate;
1881 else
1882 info->params.clock_speed = 0;
1883
1884 /* if network interface up, reprogram hardware */
1885 if (info->netcount)
1886 program_hw(info);
1887 return 0;
1888
1889 default:
1890 return hdlc_ioctl(dev, ifr, cmd);
1891 }
1892}
1893
1894/**
1895 * called by network layer when transmit timeout is detected
1896 *
1897 * dev pointer to network device structure
1898 */
1899static void hdlcdev_tx_timeout(struct net_device *dev)
1900{
1901 SLMP_INFO *info = dev_to_port(dev);
1902 struct net_device_stats *stats = hdlc_stats(dev);
1903 unsigned long flags;
1904
1905 if (debug_level >= DEBUG_LEVEL_INFO)
1906 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1907
1908 stats->tx_errors++;
1909 stats->tx_aborted_errors++;
1910
1911 spin_lock_irqsave(&info->lock,flags);
1912 tx_stop(info);
1913 spin_unlock_irqrestore(&info->lock,flags);
1914
1915 netif_wake_queue(dev);
1916}
1917
1918/**
1919 * called by device driver when transmit completes
1920 * reenable network layer transmit if stopped
1921 *
1922 * info pointer to device instance information
1923 */
1924static void hdlcdev_tx_done(SLMP_INFO *info)
1925{
1926 if (netif_queue_stopped(info->netdev))
1927 netif_wake_queue(info->netdev);
1928}
1929
1930/**
1931 * called by device driver when frame received
1932 * pass frame to network layer
1933 *
1934 * info pointer to device instance information
1935 * buf pointer to buffer contianing frame data
1936 * size count of data bytes in buf
1937 */
1938static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1939{
1940 struct sk_buff *skb = dev_alloc_skb(size);
1941 struct net_device *dev = info->netdev;
1942 struct net_device_stats *stats = hdlc_stats(dev);
1943
1944 if (debug_level >= DEBUG_LEVEL_INFO)
1945 printk("hdlcdev_rx(%s)\n",dev->name);
1946
1947 if (skb == NULL) {
1948 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
1949 stats->rx_dropped++;
1950 return;
1951 }
1952
1953 memcpy(skb_put(skb, size),buf,size);
1954
1955 skb->protocol = hdlc_type_trans(skb, info->netdev);
1956
1957 stats->rx_packets++;
1958 stats->rx_bytes += size;
1959
1960 netif_rx(skb);
1961
1962 info->netdev->last_rx = jiffies;
1963}
1964
1965/**
1966 * called by device driver when adding device instance
1967 * do generic HDLC initialization
1968 *
1969 * info pointer to device instance information
1970 *
1971 * returns 0 if success, otherwise error code
1972 */
1973static int hdlcdev_init(SLMP_INFO *info)
1974{
1975 int rc;
1976 struct net_device *dev;
1977 hdlc_device *hdlc;
1978
1979 /* allocate and initialize network and HDLC layer objects */
1980
1981 if (!(dev = alloc_hdlcdev(info))) {
1982 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1983 return -ENOMEM;
1984 }
1985
1986 /* for network layer reporting purposes only */
1987 dev->mem_start = info->phys_sca_base;
1988 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1989 dev->irq = info->irq_level;
1990
1991 /* network layer callbacks and settings */
1992 dev->do_ioctl = hdlcdev_ioctl;
1993 dev->open = hdlcdev_open;
1994 dev->stop = hdlcdev_close;
1995 dev->tx_timeout = hdlcdev_tx_timeout;
1996 dev->watchdog_timeo = 10*HZ;
1997 dev->tx_queue_len = 50;
1998
1999 /* generic HDLC layer callbacks and settings */
2000 hdlc = dev_to_hdlc(dev);
2001 hdlc->attach = hdlcdev_attach;
2002 hdlc->xmit = hdlcdev_xmit;
2003
2004 /* register objects with HDLC layer */
2005 if ((rc = register_hdlc_device(dev))) {
2006 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
2007 free_netdev(dev);
2008 return rc;
2009 }
2010
2011 info->netdev = dev;
2012 return 0;
2013}
2014
2015/**
2016 * called by device driver when removing device instance
2017 * do generic HDLC cleanup
2018 *
2019 * info pointer to device instance information
2020 */
2021static void hdlcdev_exit(SLMP_INFO *info)
2022{
2023 unregister_hdlc_device(info->netdev);
2024 free_netdev(info->netdev);
2025 info->netdev = NULL;
2026}
2027
2028#endif /* CONFIG_HDLC */
2029
2030
2031/* Return next bottom half action to perform.
2032 * Return Value: BH action code or 0 if nothing to do.
2033 */
2034int bh_action(SLMP_INFO *info)
2035{
2036 unsigned long flags;
2037 int rc = 0;
2038
2039 spin_lock_irqsave(&info->lock,flags);
2040
2041 if (info->pending_bh & BH_RECEIVE) {
2042 info->pending_bh &= ~BH_RECEIVE;
2043 rc = BH_RECEIVE;
2044 } else if (info->pending_bh & BH_TRANSMIT) {
2045 info->pending_bh &= ~BH_TRANSMIT;
2046 rc = BH_TRANSMIT;
2047 } else if (info->pending_bh & BH_STATUS) {
2048 info->pending_bh &= ~BH_STATUS;
2049 rc = BH_STATUS;
2050 }
2051
2052 if (!rc) {
2053 /* Mark BH routine as complete */
2054 info->bh_running = 0;
2055 info->bh_requested = 0;
2056 }
2057
2058 spin_unlock_irqrestore(&info->lock,flags);
2059
2060 return rc;
2061}
2062
2063/* Perform bottom half processing of work items queued by ISR.
2064 */
2065void bh_handler(void* Context)
2066{
2067 SLMP_INFO *info = (SLMP_INFO*)Context;
2068 int action;
2069
2070 if (!info)
2071 return;
2072
2073 if ( debug_level >= DEBUG_LEVEL_BH )
2074 printk( "%s(%d):%s bh_handler() entry\n",
2075 __FILE__,__LINE__,info->device_name);
2076
2077 info->bh_running = 1;
2078
2079 while((action = bh_action(info)) != 0) {
2080
2081 /* Process work item */
2082 if ( debug_level >= DEBUG_LEVEL_BH )
2083 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2084 __FILE__,__LINE__,info->device_name, action);
2085
2086 switch (action) {
2087
2088 case BH_RECEIVE:
2089 bh_receive(info);
2090 break;
2091 case BH_TRANSMIT:
2092 bh_transmit(info);
2093 break;
2094 case BH_STATUS:
2095 bh_status(info);
2096 break;
2097 default:
2098 /* unknown work item ID */
2099 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2100 __FILE__,__LINE__,info->device_name,action);
2101 break;
2102 }
2103 }
2104
2105 if ( debug_level >= DEBUG_LEVEL_BH )
2106 printk( "%s(%d):%s bh_handler() exit\n",
2107 __FILE__,__LINE__,info->device_name);
2108}
2109
2110void bh_receive(SLMP_INFO *info)
2111{
2112 if ( debug_level >= DEBUG_LEVEL_BH )
2113 printk( "%s(%d):%s bh_receive()\n",
2114 __FILE__,__LINE__,info->device_name);
2115
2116 while( rx_get_frame(info) );
2117}
2118
2119void bh_transmit(SLMP_INFO *info)
2120{
2121 struct tty_struct *tty = info->tty;
2122
2123 if ( debug_level >= DEBUG_LEVEL_BH )
2124 printk( "%s(%d):%s bh_transmit() entry\n",
2125 __FILE__,__LINE__,info->device_name);
2126
2127 if (tty) {
2128 tty_wakeup(tty);
2129 wake_up_interruptible(&tty->write_wait);
2130 }
2131}
2132
2133void bh_status(SLMP_INFO *info)
2134{
2135 if ( debug_level >= DEBUG_LEVEL_BH )
2136 printk( "%s(%d):%s bh_status() entry\n",
2137 __FILE__,__LINE__,info->device_name);
2138
2139 info->ri_chkcount = 0;
2140 info->dsr_chkcount = 0;
2141 info->dcd_chkcount = 0;
2142 info->cts_chkcount = 0;
2143}
2144
2145void isr_timer(SLMP_INFO * info)
2146{
2147 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2148
2149 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2150 write_reg(info, IER2, 0);
2151
2152 /* TMCS, Timer Control/Status Register
2153 *
2154 * 07 CMF, Compare match flag (read only) 1=match
2155 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2156 * 05 Reserved, must be 0
2157 * 04 TME, Timer Enable
2158 * 03..00 Reserved, must be 0
2159 *
2160 * 0000 0000
2161 */
2162 write_reg(info, (unsigned char)(timer + TMCS), 0);
2163
2164 info->irq_occurred = TRUE;
2165
2166 if ( debug_level >= DEBUG_LEVEL_ISR )
2167 printk("%s(%d):%s isr_timer()\n",
2168 __FILE__,__LINE__,info->device_name);
2169}
2170
2171void isr_rxint(SLMP_INFO * info)
2172{
2173 struct tty_struct *tty = info->tty;
2174 struct mgsl_icount *icount = &info->icount;
2175 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2176 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2177
2178 /* clear status bits */
2179 if (status)
2180 write_reg(info, SR1, status);
2181
2182 if (status2)
2183 write_reg(info, SR2, status2);
2184
2185 if ( debug_level >= DEBUG_LEVEL_ISR )
2186 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2187 __FILE__,__LINE__,info->device_name,status,status2);
2188
2189 if (info->params.mode == MGSL_MODE_ASYNC) {
2190 if (status & BRKD) {
2191 icount->brk++;
2192
2193 /* process break detection if tty control
2194 * is not set to ignore it
2195 */
2196 if ( tty ) {
2197 if (!(status & info->ignore_status_mask1)) {
2198 if (info->read_status_mask1 & BRKD) {
Alan Cox33f0f882006-01-09 20:54:13 -08002199 tty_insert_flip_char(tty, 0, TTY_BREAK);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002200 if (info->flags & ASYNC_SAK)
2201 do_SAK(tty);
2202 }
2203 }
2204 }
2205 }
2206 }
2207 else {
2208 if (status & (FLGD|IDLD)) {
2209 if (status & FLGD)
2210 info->icount.exithunt++;
2211 else if (status & IDLD)
2212 info->icount.rxidle++;
2213 wake_up_interruptible(&info->event_wait_q);
2214 }
2215 }
2216
2217 if (status & CDCD) {
2218 /* simulate a common modem status change interrupt
2219 * for our handler
2220 */
2221 get_signals( info );
2222 isr_io_pin(info,
2223 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2224 }
2225}
2226
2227/*
2228 * handle async rx data interrupts
2229 */
2230void isr_rxrdy(SLMP_INFO * info)
2231{
2232 u16 status;
2233 unsigned char DataByte;
2234 struct tty_struct *tty = info->tty;
2235 struct mgsl_icount *icount = &info->icount;
2236
2237 if ( debug_level >= DEBUG_LEVEL_ISR )
2238 printk("%s(%d):%s isr_rxrdy\n",
2239 __FILE__,__LINE__,info->device_name);
2240
2241 while((status = read_reg(info,CST0)) & BIT0)
2242 {
Alan Cox33f0f882006-01-09 20:54:13 -08002243 int flag = 0;
2244 int over = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002245 DataByte = read_reg(info,TRB);
2246
Linus Torvalds1da177e2005-04-16 15:20:36 -07002247 icount->rx++;
2248
2249 if ( status & (PE + FRME + OVRN) ) {
2250 printk("%s(%d):%s rxerr=%04X\n",
2251 __FILE__,__LINE__,info->device_name,status);
2252
2253 /* update error statistics */
2254 if (status & PE)
2255 icount->parity++;
2256 else if (status & FRME)
2257 icount->frame++;
2258 else if (status & OVRN)
2259 icount->overrun++;
2260
2261 /* discard char if tty control flags say so */
2262 if (status & info->ignore_status_mask2)
2263 continue;
2264
2265 status &= info->read_status_mask2;
2266
2267 if ( tty ) {
2268 if (status & PE)
Alan Cox33f0f882006-01-09 20:54:13 -08002269 flag = TTY_PARITY;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002270 else if (status & FRME)
Alan Cox33f0f882006-01-09 20:54:13 -08002271 flag = TTY_FRAME;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002272 if (status & OVRN) {
2273 /* Overrun is special, since it's
2274 * reported immediately, and doesn't
2275 * affect the current character
2276 */
Alan Cox33f0f882006-01-09 20:54:13 -08002277 over = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002278 }
2279 }
2280 } /* end of if (error) */
2281
2282 if ( tty ) {
Alan Cox33f0f882006-01-09 20:54:13 -08002283 tty_insert_flip_char(tty, DataByte, flag);
2284 if (over)
2285 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002286 }
2287 }
2288
2289 if ( debug_level >= DEBUG_LEVEL_ISR ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002290 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2291 __FILE__,__LINE__,info->device_name,
2292 icount->rx,icount->brk,icount->parity,
2293 icount->frame,icount->overrun);
2294 }
2295
Alan Cox33f0f882006-01-09 20:54:13 -08002296 if ( tty )
Linus Torvalds1da177e2005-04-16 15:20:36 -07002297 tty_flip_buffer_push(tty);
2298}
2299
2300static void isr_txeom(SLMP_INFO * info, unsigned char status)
2301{
2302 if ( debug_level >= DEBUG_LEVEL_ISR )
2303 printk("%s(%d):%s isr_txeom status=%02x\n",
2304 __FILE__,__LINE__,info->device_name,status);
2305
2306 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2307 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2308 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2309
2310 if (status & UDRN) {
2311 write_reg(info, CMD, TXRESET);
2312 write_reg(info, CMD, TXENABLE);
2313 } else
2314 write_reg(info, CMD, TXBUFCLR);
2315
2316 /* disable and clear tx interrupts */
2317 info->ie0_value &= ~TXRDYE;
2318 info->ie1_value &= ~(IDLE + UDRN);
2319 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2320 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2321
2322 if ( info->tx_active ) {
2323 if (info->params.mode != MGSL_MODE_ASYNC) {
2324 if (status & UDRN)
2325 info->icount.txunder++;
2326 else if (status & IDLE)
2327 info->icount.txok++;
2328 }
2329
2330 info->tx_active = 0;
2331 info->tx_count = info->tx_put = info->tx_get = 0;
2332
2333 del_timer(&info->tx_timer);
2334
2335 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2336 info->serial_signals &= ~SerialSignal_RTS;
2337 info->drop_rts_on_tx_done = 0;
2338 set_signals(info);
2339 }
2340
2341#ifdef CONFIG_HDLC
2342 if (info->netcount)
2343 hdlcdev_tx_done(info);
2344 else
2345#endif
2346 {
2347 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2348 tx_stop(info);
2349 return;
2350 }
2351 info->pending_bh |= BH_TRANSMIT;
2352 }
2353 }
2354}
2355
2356
2357/*
2358 * handle tx status interrupts
2359 */
2360void isr_txint(SLMP_INFO * info)
2361{
2362 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2363
2364 /* clear status bits */
2365 write_reg(info, SR1, status);
2366
2367 if ( debug_level >= DEBUG_LEVEL_ISR )
2368 printk("%s(%d):%s isr_txint status=%02x\n",
2369 __FILE__,__LINE__,info->device_name,status);
2370
2371 if (status & (UDRN + IDLE))
2372 isr_txeom(info, status);
2373
2374 if (status & CCTS) {
2375 /* simulate a common modem status change interrupt
2376 * for our handler
2377 */
2378 get_signals( info );
2379 isr_io_pin(info,
2380 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2381
2382 }
2383}
2384
2385/*
2386 * handle async tx data interrupts
2387 */
2388void isr_txrdy(SLMP_INFO * info)
2389{
2390 if ( debug_level >= DEBUG_LEVEL_ISR )
2391 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2392 __FILE__,__LINE__,info->device_name,info->tx_count);
2393
2394 if (info->params.mode != MGSL_MODE_ASYNC) {
2395 /* disable TXRDY IRQ, enable IDLE IRQ */
2396 info->ie0_value &= ~TXRDYE;
2397 info->ie1_value |= IDLE;
2398 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2399 return;
2400 }
2401
2402 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2403 tx_stop(info);
2404 return;
2405 }
2406
2407 if ( info->tx_count )
2408 tx_load_fifo( info );
2409 else {
2410 info->tx_active = 0;
2411 info->ie0_value &= ~TXRDYE;
2412 write_reg(info, IE0, info->ie0_value);
2413 }
2414
2415 if (info->tx_count < WAKEUP_CHARS)
2416 info->pending_bh |= BH_TRANSMIT;
2417}
2418
2419void isr_rxdmaok(SLMP_INFO * info)
2420{
2421 /* BIT7 = EOT (end of transfer)
2422 * BIT6 = EOM (end of message/frame)
2423 */
2424 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2425
2426 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2427 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2428
2429 if ( debug_level >= DEBUG_LEVEL_ISR )
2430 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2431 __FILE__,__LINE__,info->device_name,status);
2432
2433 info->pending_bh |= BH_RECEIVE;
2434}
2435
2436void isr_rxdmaerror(SLMP_INFO * info)
2437{
2438 /* BIT5 = BOF (buffer overflow)
2439 * BIT4 = COF (counter overflow)
2440 */
2441 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2442
2443 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2444 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2445
2446 if ( debug_level >= DEBUG_LEVEL_ISR )
2447 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2448 __FILE__,__LINE__,info->device_name,status);
2449
2450 info->rx_overflow = TRUE;
2451 info->pending_bh |= BH_RECEIVE;
2452}
2453
2454void isr_txdmaok(SLMP_INFO * info)
2455{
2456 unsigned char status_reg1 = read_reg(info, SR1);
2457
2458 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2459 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2460 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2461
2462 if ( debug_level >= DEBUG_LEVEL_ISR )
2463 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2464 __FILE__,__LINE__,info->device_name,status_reg1);
2465
2466 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2467 write_reg16(info, TRC0, 0);
2468 info->ie0_value |= TXRDYE;
2469 write_reg(info, IE0, info->ie0_value);
2470}
2471
2472void isr_txdmaerror(SLMP_INFO * info)
2473{
2474 /* BIT5 = BOF (buffer overflow)
2475 * BIT4 = COF (counter overflow)
2476 */
2477 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2478
2479 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2480 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2481
2482 if ( debug_level >= DEBUG_LEVEL_ISR )
2483 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2484 __FILE__,__LINE__,info->device_name,status);
2485}
2486
2487/* handle input serial signal changes
2488 */
2489void isr_io_pin( SLMP_INFO *info, u16 status )
2490{
2491 struct mgsl_icount *icount;
2492
2493 if ( debug_level >= DEBUG_LEVEL_ISR )
2494 printk("%s(%d):isr_io_pin status=%04X\n",
2495 __FILE__,__LINE__,status);
2496
2497 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2498 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2499 icount = &info->icount;
2500 /* update input line counters */
2501 if (status & MISCSTATUS_RI_LATCHED) {
2502 icount->rng++;
2503 if ( status & SerialSignal_RI )
2504 info->input_signal_events.ri_up++;
2505 else
2506 info->input_signal_events.ri_down++;
2507 }
2508 if (status & MISCSTATUS_DSR_LATCHED) {
2509 icount->dsr++;
2510 if ( status & SerialSignal_DSR )
2511 info->input_signal_events.dsr_up++;
2512 else
2513 info->input_signal_events.dsr_down++;
2514 }
2515 if (status & MISCSTATUS_DCD_LATCHED) {
2516 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2517 info->ie1_value &= ~CDCD;
2518 write_reg(info, IE1, info->ie1_value);
2519 }
2520 icount->dcd++;
2521 if (status & SerialSignal_DCD) {
2522 info->input_signal_events.dcd_up++;
2523 } else
2524 info->input_signal_events.dcd_down++;
2525#ifdef CONFIG_HDLC
2526 if (info->netcount)
2527 hdlc_set_carrier(status & SerialSignal_DCD, info->netdev);
2528#endif
2529 }
2530 if (status & MISCSTATUS_CTS_LATCHED)
2531 {
2532 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2533 info->ie1_value &= ~CCTS;
2534 write_reg(info, IE1, info->ie1_value);
2535 }
2536 icount->cts++;
2537 if ( status & SerialSignal_CTS )
2538 info->input_signal_events.cts_up++;
2539 else
2540 info->input_signal_events.cts_down++;
2541 }
2542 wake_up_interruptible(&info->status_event_wait_q);
2543 wake_up_interruptible(&info->event_wait_q);
2544
2545 if ( (info->flags & ASYNC_CHECK_CD) &&
2546 (status & MISCSTATUS_DCD_LATCHED) ) {
2547 if ( debug_level >= DEBUG_LEVEL_ISR )
2548 printk("%s CD now %s...", info->device_name,
2549 (status & SerialSignal_DCD) ? "on" : "off");
2550 if (status & SerialSignal_DCD)
2551 wake_up_interruptible(&info->open_wait);
2552 else {
2553 if ( debug_level >= DEBUG_LEVEL_ISR )
2554 printk("doing serial hangup...");
2555 if (info->tty)
2556 tty_hangup(info->tty);
2557 }
2558 }
2559
2560 if ( (info->flags & ASYNC_CTS_FLOW) &&
2561 (status & MISCSTATUS_CTS_LATCHED) ) {
2562 if ( info->tty ) {
2563 if (info->tty->hw_stopped) {
2564 if (status & SerialSignal_CTS) {
2565 if ( debug_level >= DEBUG_LEVEL_ISR )
2566 printk("CTS tx start...");
2567 info->tty->hw_stopped = 0;
2568 tx_start(info);
2569 info->pending_bh |= BH_TRANSMIT;
2570 return;
2571 }
2572 } else {
2573 if (!(status & SerialSignal_CTS)) {
2574 if ( debug_level >= DEBUG_LEVEL_ISR )
2575 printk("CTS tx stop...");
2576 info->tty->hw_stopped = 1;
2577 tx_stop(info);
2578 }
2579 }
2580 }
2581 }
2582 }
2583
2584 info->pending_bh |= BH_STATUS;
2585}
2586
2587/* Interrupt service routine entry point.
2588 *
2589 * Arguments:
2590 * irq interrupt number that caused interrupt
2591 * dev_id device ID supplied during interrupt registration
2592 * regs interrupted processor context
2593 */
2594static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id,
2595 struct pt_regs *regs)
2596{
2597 SLMP_INFO * info;
2598 unsigned char status, status0, status1=0;
2599 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2600 unsigned char timerstatus0, timerstatus1=0;
2601 unsigned char shift;
2602 unsigned int i;
2603 unsigned short tmp;
2604
2605 if ( debug_level >= DEBUG_LEVEL_ISR )
2606 printk("%s(%d): synclinkmp_interrupt(%d)entry.\n",
2607 __FILE__,__LINE__,irq);
2608
2609 info = (SLMP_INFO *)dev_id;
2610 if (!info)
2611 return IRQ_NONE;
2612
2613 spin_lock(&info->lock);
2614
2615 for(;;) {
2616
2617 /* get status for SCA0 (ports 0-1) */
2618 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2619 status0 = (unsigned char)tmp;
2620 dmastatus0 = (unsigned char)(tmp>>8);
2621 timerstatus0 = read_reg(info, ISR2);
2622
2623 if ( debug_level >= DEBUG_LEVEL_ISR )
2624 printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2625 __FILE__,__LINE__,info->device_name,
2626 status0,dmastatus0,timerstatus0);
2627
2628 if (info->port_count == 4) {
2629 /* get status for SCA1 (ports 2-3) */
2630 tmp = read_reg16(info->port_array[2], ISR0);
2631 status1 = (unsigned char)tmp;
2632 dmastatus1 = (unsigned char)(tmp>>8);
2633 timerstatus1 = read_reg(info->port_array[2], ISR2);
2634
2635 if ( debug_level >= DEBUG_LEVEL_ISR )
2636 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2637 __FILE__,__LINE__,info->device_name,
2638 status1,dmastatus1,timerstatus1);
2639 }
2640
2641 if (!status0 && !dmastatus0 && !timerstatus0 &&
2642 !status1 && !dmastatus1 && !timerstatus1)
2643 break;
2644
2645 for(i=0; i < info->port_count ; i++) {
2646 if (info->port_array[i] == NULL)
2647 continue;
2648 if (i < 2) {
2649 status = status0;
2650 dmastatus = dmastatus0;
2651 } else {
2652 status = status1;
2653 dmastatus = dmastatus1;
2654 }
2655
2656 shift = i & 1 ? 4 :0;
2657
2658 if (status & BIT0 << shift)
2659 isr_rxrdy(info->port_array[i]);
2660 if (status & BIT1 << shift)
2661 isr_txrdy(info->port_array[i]);
2662 if (status & BIT2 << shift)
2663 isr_rxint(info->port_array[i]);
2664 if (status & BIT3 << shift)
2665 isr_txint(info->port_array[i]);
2666
2667 if (dmastatus & BIT0 << shift)
2668 isr_rxdmaerror(info->port_array[i]);
2669 if (dmastatus & BIT1 << shift)
2670 isr_rxdmaok(info->port_array[i]);
2671 if (dmastatus & BIT2 << shift)
2672 isr_txdmaerror(info->port_array[i]);
2673 if (dmastatus & BIT3 << shift)
2674 isr_txdmaok(info->port_array[i]);
2675 }
2676
2677 if (timerstatus0 & (BIT5 | BIT4))
2678 isr_timer(info->port_array[0]);
2679 if (timerstatus0 & (BIT7 | BIT6))
2680 isr_timer(info->port_array[1]);
2681 if (timerstatus1 & (BIT5 | BIT4))
2682 isr_timer(info->port_array[2]);
2683 if (timerstatus1 & (BIT7 | BIT6))
2684 isr_timer(info->port_array[3]);
2685 }
2686
2687 for(i=0; i < info->port_count ; i++) {
2688 SLMP_INFO * port = info->port_array[i];
2689
2690 /* Request bottom half processing if there's something
2691 * for it to do and the bh is not already running.
2692 *
2693 * Note: startup adapter diags require interrupts.
2694 * do not request bottom half processing if the
2695 * device is not open in a normal mode.
2696 */
2697 if ( port && (port->count || port->netcount) &&
2698 port->pending_bh && !port->bh_running &&
2699 !port->bh_requested ) {
2700 if ( debug_level >= DEBUG_LEVEL_ISR )
2701 printk("%s(%d):%s queueing bh task.\n",
2702 __FILE__,__LINE__,port->device_name);
2703 schedule_work(&port->task);
2704 port->bh_requested = 1;
2705 }
2706 }
2707
2708 spin_unlock(&info->lock);
2709
2710 if ( debug_level >= DEBUG_LEVEL_ISR )
2711 printk("%s(%d):synclinkmp_interrupt(%d)exit.\n",
2712 __FILE__,__LINE__,irq);
2713 return IRQ_HANDLED;
2714}
2715
2716/* Initialize and start device.
2717 */
2718static int startup(SLMP_INFO * info)
2719{
2720 if ( debug_level >= DEBUG_LEVEL_INFO )
2721 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2722
2723 if (info->flags & ASYNC_INITIALIZED)
2724 return 0;
2725
2726 if (!info->tx_buf) {
2727 info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
2728 if (!info->tx_buf) {
2729 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2730 __FILE__,__LINE__,info->device_name);
2731 return -ENOMEM;
2732 }
2733 }
2734
2735 info->pending_bh = 0;
2736
Paul Fulghum166692e2005-09-09 13:02:16 -07002737 memset(&info->icount, 0, sizeof(info->icount));
2738
Linus Torvalds1da177e2005-04-16 15:20:36 -07002739 /* program hardware for current parameters */
2740 reset_port(info);
2741
2742 change_params(info);
2743
2744 info->status_timer.expires = jiffies + msecs_to_jiffies(10);
2745 add_timer(&info->status_timer);
2746
2747 if (info->tty)
2748 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2749
2750 info->flags |= ASYNC_INITIALIZED;
2751
2752 return 0;
2753}
2754
2755/* Called by close() and hangup() to shutdown hardware
2756 */
2757static void shutdown(SLMP_INFO * info)
2758{
2759 unsigned long flags;
2760
2761 if (!(info->flags & ASYNC_INITIALIZED))
2762 return;
2763
2764 if (debug_level >= DEBUG_LEVEL_INFO)
2765 printk("%s(%d):%s synclinkmp_shutdown()\n",
2766 __FILE__,__LINE__, info->device_name );
2767
2768 /* clear status wait queue because status changes */
2769 /* can't happen after shutting down the hardware */
2770 wake_up_interruptible(&info->status_event_wait_q);
2771 wake_up_interruptible(&info->event_wait_q);
2772
2773 del_timer(&info->tx_timer);
2774 del_timer(&info->status_timer);
2775
Jesper Juhl735d5662005-11-07 01:01:29 -08002776 kfree(info->tx_buf);
2777 info->tx_buf = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002778
2779 spin_lock_irqsave(&info->lock,flags);
2780
2781 reset_port(info);
2782
2783 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2784 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2785 set_signals(info);
2786 }
2787
2788 spin_unlock_irqrestore(&info->lock,flags);
2789
2790 if (info->tty)
2791 set_bit(TTY_IO_ERROR, &info->tty->flags);
2792
2793 info->flags &= ~ASYNC_INITIALIZED;
2794}
2795
2796static void program_hw(SLMP_INFO *info)
2797{
2798 unsigned long flags;
2799
2800 spin_lock_irqsave(&info->lock,flags);
2801
2802 rx_stop(info);
2803 tx_stop(info);
2804
2805 info->tx_count = info->tx_put = info->tx_get = 0;
2806
2807 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2808 hdlc_mode(info);
2809 else
2810 async_mode(info);
2811
2812 set_signals(info);
2813
2814 info->dcd_chkcount = 0;
2815 info->cts_chkcount = 0;
2816 info->ri_chkcount = 0;
2817 info->dsr_chkcount = 0;
2818
2819 info->ie1_value |= (CDCD|CCTS);
2820 write_reg(info, IE1, info->ie1_value);
2821
2822 get_signals(info);
2823
2824 if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
2825 rx_start(info);
2826
2827 spin_unlock_irqrestore(&info->lock,flags);
2828}
2829
2830/* Reconfigure adapter based on new parameters
2831 */
2832static void change_params(SLMP_INFO *info)
2833{
2834 unsigned cflag;
2835 int bits_per_char;
2836
2837 if (!info->tty || !info->tty->termios)
2838 return;
2839
2840 if (debug_level >= DEBUG_LEVEL_INFO)
2841 printk("%s(%d):%s change_params()\n",
2842 __FILE__,__LINE__, info->device_name );
2843
2844 cflag = info->tty->termios->c_cflag;
2845
2846 /* if B0 rate (hangup) specified then negate DTR and RTS */
2847 /* otherwise assert DTR and RTS */
2848 if (cflag & CBAUD)
2849 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2850 else
2851 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2852
2853 /* byte size and parity */
2854
2855 switch (cflag & CSIZE) {
2856 case CS5: info->params.data_bits = 5; break;
2857 case CS6: info->params.data_bits = 6; break;
2858 case CS7: info->params.data_bits = 7; break;
2859 case CS8: info->params.data_bits = 8; break;
2860 /* Never happens, but GCC is too dumb to figure it out */
2861 default: info->params.data_bits = 7; break;
2862 }
2863
2864 if (cflag & CSTOPB)
2865 info->params.stop_bits = 2;
2866 else
2867 info->params.stop_bits = 1;
2868
2869 info->params.parity = ASYNC_PARITY_NONE;
2870 if (cflag & PARENB) {
2871 if (cflag & PARODD)
2872 info->params.parity = ASYNC_PARITY_ODD;
2873 else
2874 info->params.parity = ASYNC_PARITY_EVEN;
2875#ifdef CMSPAR
2876 if (cflag & CMSPAR)
2877 info->params.parity = ASYNC_PARITY_SPACE;
2878#endif
2879 }
2880
2881 /* calculate number of jiffies to transmit a full
2882 * FIFO (32 bytes) at specified data rate
2883 */
2884 bits_per_char = info->params.data_bits +
2885 info->params.stop_bits + 1;
2886
2887 /* if port data rate is set to 460800 or less then
2888 * allow tty settings to override, otherwise keep the
2889 * current data rate.
2890 */
2891 if (info->params.data_rate <= 460800) {
2892 info->params.data_rate = tty_get_baud_rate(info->tty);
2893 }
2894
2895 if ( info->params.data_rate ) {
2896 info->timeout = (32*HZ*bits_per_char) /
2897 info->params.data_rate;
2898 }
2899 info->timeout += HZ/50; /* Add .02 seconds of slop */
2900
2901 if (cflag & CRTSCTS)
2902 info->flags |= ASYNC_CTS_FLOW;
2903 else
2904 info->flags &= ~ASYNC_CTS_FLOW;
2905
2906 if (cflag & CLOCAL)
2907 info->flags &= ~ASYNC_CHECK_CD;
2908 else
2909 info->flags |= ASYNC_CHECK_CD;
2910
2911 /* process tty input control flags */
2912
2913 info->read_status_mask2 = OVRN;
2914 if (I_INPCK(info->tty))
2915 info->read_status_mask2 |= PE | FRME;
2916 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2917 info->read_status_mask1 |= BRKD;
2918 if (I_IGNPAR(info->tty))
2919 info->ignore_status_mask2 |= PE | FRME;
2920 if (I_IGNBRK(info->tty)) {
2921 info->ignore_status_mask1 |= BRKD;
2922 /* If ignoring parity and break indicators, ignore
2923 * overruns too. (For real raw support).
2924 */
2925 if (I_IGNPAR(info->tty))
2926 info->ignore_status_mask2 |= OVRN;
2927 }
2928
2929 program_hw(info);
2930}
2931
2932static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2933{
2934 int err;
2935
2936 if (debug_level >= DEBUG_LEVEL_INFO)
2937 printk("%s(%d):%s get_params()\n",
2938 __FILE__,__LINE__, info->device_name);
2939
Paul Fulghum166692e2005-09-09 13:02:16 -07002940 if (!user_icount) {
2941 memset(&info->icount, 0, sizeof(info->icount));
2942 } else {
2943 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2944 if (err)
2945 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002946 }
2947
2948 return 0;
2949}
2950
2951static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2952{
2953 int err;
2954 if (debug_level >= DEBUG_LEVEL_INFO)
2955 printk("%s(%d):%s get_params()\n",
2956 __FILE__,__LINE__, info->device_name);
2957
2958 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2959 if (err) {
2960 if ( debug_level >= DEBUG_LEVEL_INFO )
2961 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2962 __FILE__,__LINE__,info->device_name);
2963 return -EFAULT;
2964 }
2965
2966 return 0;
2967}
2968
2969static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2970{
2971 unsigned long flags;
2972 MGSL_PARAMS tmp_params;
2973 int err;
2974
2975 if (debug_level >= DEBUG_LEVEL_INFO)
2976 printk("%s(%d):%s set_params\n",
2977 __FILE__,__LINE__,info->device_name );
2978 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2979 if (err) {
2980 if ( debug_level >= DEBUG_LEVEL_INFO )
2981 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2982 __FILE__,__LINE__,info->device_name);
2983 return -EFAULT;
2984 }
2985
2986 spin_lock_irqsave(&info->lock,flags);
2987 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2988 spin_unlock_irqrestore(&info->lock,flags);
2989
2990 change_params(info);
2991
2992 return 0;
2993}
2994
2995static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2996{
2997 int err;
2998
2999 if (debug_level >= DEBUG_LEVEL_INFO)
3000 printk("%s(%d):%s get_txidle()=%d\n",
3001 __FILE__,__LINE__, info->device_name, info->idle_mode);
3002
3003 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
3004 if (err) {
3005 if ( debug_level >= DEBUG_LEVEL_INFO )
3006 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
3007 __FILE__,__LINE__,info->device_name);
3008 return -EFAULT;
3009 }
3010
3011 return 0;
3012}
3013
3014static int set_txidle(SLMP_INFO * info, int idle_mode)
3015{
3016 unsigned long flags;
3017
3018 if (debug_level >= DEBUG_LEVEL_INFO)
3019 printk("%s(%d):%s set_txidle(%d)\n",
3020 __FILE__,__LINE__,info->device_name, idle_mode );
3021
3022 spin_lock_irqsave(&info->lock,flags);
3023 info->idle_mode = idle_mode;
3024 tx_set_idle( info );
3025 spin_unlock_irqrestore(&info->lock,flags);
3026 return 0;
3027}
3028
3029static int tx_enable(SLMP_INFO * info, int enable)
3030{
3031 unsigned long flags;
3032
3033 if (debug_level >= DEBUG_LEVEL_INFO)
3034 printk("%s(%d):%s tx_enable(%d)\n",
3035 __FILE__,__LINE__,info->device_name, enable);
3036
3037 spin_lock_irqsave(&info->lock,flags);
3038 if ( enable ) {
3039 if ( !info->tx_enabled ) {
3040 tx_start(info);
3041 }
3042 } else {
3043 if ( info->tx_enabled )
3044 tx_stop(info);
3045 }
3046 spin_unlock_irqrestore(&info->lock,flags);
3047 return 0;
3048}
3049
3050/* abort send HDLC frame
3051 */
3052static int tx_abort(SLMP_INFO * info)
3053{
3054 unsigned long flags;
3055
3056 if (debug_level >= DEBUG_LEVEL_INFO)
3057 printk("%s(%d):%s tx_abort()\n",
3058 __FILE__,__LINE__,info->device_name);
3059
3060 spin_lock_irqsave(&info->lock,flags);
3061 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
3062 info->ie1_value &= ~UDRN;
3063 info->ie1_value |= IDLE;
3064 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
3065 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
3066
3067 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
3068 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3069
3070 write_reg(info, CMD, TXABORT);
3071 }
3072 spin_unlock_irqrestore(&info->lock,flags);
3073 return 0;
3074}
3075
3076static int rx_enable(SLMP_INFO * info, int enable)
3077{
3078 unsigned long flags;
3079
3080 if (debug_level >= DEBUG_LEVEL_INFO)
3081 printk("%s(%d):%s rx_enable(%d)\n",
3082 __FILE__,__LINE__,info->device_name,enable);
3083
3084 spin_lock_irqsave(&info->lock,flags);
3085 if ( enable ) {
3086 if ( !info->rx_enabled )
3087 rx_start(info);
3088 } else {
3089 if ( info->rx_enabled )
3090 rx_stop(info);
3091 }
3092 spin_unlock_irqrestore(&info->lock,flags);
3093 return 0;
3094}
3095
Linus Torvalds1da177e2005-04-16 15:20:36 -07003096/* wait for specified event to occur
3097 */
3098static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3099{
3100 unsigned long flags;
3101 int s;
3102 int rc=0;
3103 struct mgsl_icount cprev, cnow;
3104 int events;
3105 int mask;
3106 struct _input_signal_events oldsigs, newsigs;
3107 DECLARE_WAITQUEUE(wait, current);
3108
3109 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3110 if (rc) {
3111 return -EFAULT;
3112 }
3113
3114 if (debug_level >= DEBUG_LEVEL_INFO)
3115 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3116 __FILE__,__LINE__,info->device_name,mask);
3117
3118 spin_lock_irqsave(&info->lock,flags);
3119
3120 /* return immediately if state matches requested events */
3121 get_signals(info);
Paul Fulghum7f3edb92005-09-09 13:02:14 -07003122 s = info->serial_signals;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003123
3124 events = mask &
3125 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3126 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3127 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3128 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3129 if (events) {
3130 spin_unlock_irqrestore(&info->lock,flags);
3131 goto exit;
3132 }
3133
3134 /* save current irq counts */
3135 cprev = info->icount;
3136 oldsigs = info->input_signal_events;
3137
3138 /* enable hunt and idle irqs if needed */
3139 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3140 unsigned char oldval = info->ie1_value;
3141 unsigned char newval = oldval +
3142 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3143 (mask & MgslEvent_IdleReceived ? IDLD:0);
3144 if ( oldval != newval ) {
3145 info->ie1_value = newval;
3146 write_reg(info, IE1, info->ie1_value);
3147 }
3148 }
3149
3150 set_current_state(TASK_INTERRUPTIBLE);
3151 add_wait_queue(&info->event_wait_q, &wait);
3152
3153 spin_unlock_irqrestore(&info->lock,flags);
3154
3155 for(;;) {
3156 schedule();
3157 if (signal_pending(current)) {
3158 rc = -ERESTARTSYS;
3159 break;
3160 }
3161
3162 /* get current irq counts */
3163 spin_lock_irqsave(&info->lock,flags);
3164 cnow = info->icount;
3165 newsigs = info->input_signal_events;
3166 set_current_state(TASK_INTERRUPTIBLE);
3167 spin_unlock_irqrestore(&info->lock,flags);
3168
3169 /* if no change, wait aborted for some reason */
3170 if (newsigs.dsr_up == oldsigs.dsr_up &&
3171 newsigs.dsr_down == oldsigs.dsr_down &&
3172 newsigs.dcd_up == oldsigs.dcd_up &&
3173 newsigs.dcd_down == oldsigs.dcd_down &&
3174 newsigs.cts_up == oldsigs.cts_up &&
3175 newsigs.cts_down == oldsigs.cts_down &&
3176 newsigs.ri_up == oldsigs.ri_up &&
3177 newsigs.ri_down == oldsigs.ri_down &&
3178 cnow.exithunt == cprev.exithunt &&
3179 cnow.rxidle == cprev.rxidle) {
3180 rc = -EIO;
3181 break;
3182 }
3183
3184 events = mask &
3185 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3186 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3187 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3188 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3189 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3190 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3191 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3192 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3193 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3194 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3195 if (events)
3196 break;
3197
3198 cprev = cnow;
3199 oldsigs = newsigs;
3200 }
3201
3202 remove_wait_queue(&info->event_wait_q, &wait);
3203 set_current_state(TASK_RUNNING);
3204
3205
3206 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3207 spin_lock_irqsave(&info->lock,flags);
3208 if (!waitqueue_active(&info->event_wait_q)) {
3209 /* disable enable exit hunt mode/idle rcvd IRQs */
3210 info->ie1_value &= ~(FLGD|IDLD);
3211 write_reg(info, IE1, info->ie1_value);
3212 }
3213 spin_unlock_irqrestore(&info->lock,flags);
3214 }
3215exit:
3216 if ( rc == 0 )
3217 PUT_USER(rc, events, mask_ptr);
3218
3219 return rc;
3220}
3221
3222static int modem_input_wait(SLMP_INFO *info,int arg)
3223{
3224 unsigned long flags;
3225 int rc;
3226 struct mgsl_icount cprev, cnow;
3227 DECLARE_WAITQUEUE(wait, current);
3228
3229 /* save current irq counts */
3230 spin_lock_irqsave(&info->lock,flags);
3231 cprev = info->icount;
3232 add_wait_queue(&info->status_event_wait_q, &wait);
3233 set_current_state(TASK_INTERRUPTIBLE);
3234 spin_unlock_irqrestore(&info->lock,flags);
3235
3236 for(;;) {
3237 schedule();
3238 if (signal_pending(current)) {
3239 rc = -ERESTARTSYS;
3240 break;
3241 }
3242
3243 /* get new irq counts */
3244 spin_lock_irqsave(&info->lock,flags);
3245 cnow = info->icount;
3246 set_current_state(TASK_INTERRUPTIBLE);
3247 spin_unlock_irqrestore(&info->lock,flags);
3248
3249 /* if no change, wait aborted for some reason */
3250 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3251 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3252 rc = -EIO;
3253 break;
3254 }
3255
3256 /* check for change in caller specified modem input */
3257 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3258 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3259 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3260 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3261 rc = 0;
3262 break;
3263 }
3264
3265 cprev = cnow;
3266 }
3267 remove_wait_queue(&info->status_event_wait_q, &wait);
3268 set_current_state(TASK_RUNNING);
3269 return rc;
3270}
3271
3272/* return the state of the serial control and status signals
3273 */
3274static int tiocmget(struct tty_struct *tty, struct file *file)
3275{
3276 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3277 unsigned int result;
3278 unsigned long flags;
3279
3280 spin_lock_irqsave(&info->lock,flags);
3281 get_signals(info);
3282 spin_unlock_irqrestore(&info->lock,flags);
3283
3284 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3285 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3286 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3287 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3288 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3289 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3290
3291 if (debug_level >= DEBUG_LEVEL_INFO)
3292 printk("%s(%d):%s tiocmget() value=%08X\n",
3293 __FILE__,__LINE__, info->device_name, result );
3294 return result;
3295}
3296
3297/* set modem control signals (DTR/RTS)
3298 */
3299static int tiocmset(struct tty_struct *tty, struct file *file,
3300 unsigned int set, unsigned int clear)
3301{
3302 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3303 unsigned long flags;
3304
3305 if (debug_level >= DEBUG_LEVEL_INFO)
3306 printk("%s(%d):%s tiocmset(%x,%x)\n",
3307 __FILE__,__LINE__,info->device_name, set, clear);
3308
3309 if (set & TIOCM_RTS)
3310 info->serial_signals |= SerialSignal_RTS;
3311 if (set & TIOCM_DTR)
3312 info->serial_signals |= SerialSignal_DTR;
3313 if (clear & TIOCM_RTS)
3314 info->serial_signals &= ~SerialSignal_RTS;
3315 if (clear & TIOCM_DTR)
3316 info->serial_signals &= ~SerialSignal_DTR;
3317
3318 spin_lock_irqsave(&info->lock,flags);
3319 set_signals(info);
3320 spin_unlock_irqrestore(&info->lock,flags);
3321
3322 return 0;
3323}
3324
3325
3326
3327/* Block the current process until the specified port is ready to open.
3328 */
3329static int block_til_ready(struct tty_struct *tty, struct file *filp,
3330 SLMP_INFO *info)
3331{
3332 DECLARE_WAITQUEUE(wait, current);
3333 int retval;
3334 int do_clocal = 0, extra_count = 0;
3335 unsigned long flags;
3336
3337 if (debug_level >= DEBUG_LEVEL_INFO)
3338 printk("%s(%d):%s block_til_ready()\n",
3339 __FILE__,__LINE__, tty->driver->name );
3340
3341 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3342 /* nonblock mode is set or port is not enabled */
3343 /* just verify that callout device is not active */
3344 info->flags |= ASYNC_NORMAL_ACTIVE;
3345 return 0;
3346 }
3347
3348 if (tty->termios->c_cflag & CLOCAL)
3349 do_clocal = 1;
3350
3351 /* Wait for carrier detect and the line to become
3352 * free (i.e., not in use by the callout). While we are in
3353 * this loop, info->count is dropped by one, so that
3354 * close() knows when to free things. We restore it upon
3355 * exit, either normal or abnormal.
3356 */
3357
3358 retval = 0;
3359 add_wait_queue(&info->open_wait, &wait);
3360
3361 if (debug_level >= DEBUG_LEVEL_INFO)
3362 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3363 __FILE__,__LINE__, tty->driver->name, info->count );
3364
3365 spin_lock_irqsave(&info->lock, flags);
3366 if (!tty_hung_up_p(filp)) {
3367 extra_count = 1;
3368 info->count--;
3369 }
3370 spin_unlock_irqrestore(&info->lock, flags);
3371 info->blocked_open++;
3372
3373 while (1) {
3374 if ((tty->termios->c_cflag & CBAUD)) {
3375 spin_lock_irqsave(&info->lock,flags);
3376 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3377 set_signals(info);
3378 spin_unlock_irqrestore(&info->lock,flags);
3379 }
3380
3381 set_current_state(TASK_INTERRUPTIBLE);
3382
3383 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3384 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3385 -EAGAIN : -ERESTARTSYS;
3386 break;
3387 }
3388
3389 spin_lock_irqsave(&info->lock,flags);
3390 get_signals(info);
3391 spin_unlock_irqrestore(&info->lock,flags);
3392
3393 if (!(info->flags & ASYNC_CLOSING) &&
3394 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
3395 break;
3396 }
3397
3398 if (signal_pending(current)) {
3399 retval = -ERESTARTSYS;
3400 break;
3401 }
3402
3403 if (debug_level >= DEBUG_LEVEL_INFO)
3404 printk("%s(%d):%s block_til_ready() count=%d\n",
3405 __FILE__,__LINE__, tty->driver->name, info->count );
3406
3407 schedule();
3408 }
3409
3410 set_current_state(TASK_RUNNING);
3411 remove_wait_queue(&info->open_wait, &wait);
3412
3413 if (extra_count)
3414 info->count++;
3415 info->blocked_open--;
3416
3417 if (debug_level >= DEBUG_LEVEL_INFO)
3418 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3419 __FILE__,__LINE__, tty->driver->name, info->count );
3420
3421 if (!retval)
3422 info->flags |= ASYNC_NORMAL_ACTIVE;
3423
3424 return retval;
3425}
3426
3427int alloc_dma_bufs(SLMP_INFO *info)
3428{
3429 unsigned short BuffersPerFrame;
3430 unsigned short BufferCount;
3431
3432 // Force allocation to start at 64K boundary for each port.
3433 // This is necessary because *all* buffer descriptors for a port
3434 // *must* be in the same 64K block. All descriptors on a port
3435 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3436 // into the CBP register.
3437 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3438
3439 /* Calculate the number of DMA buffers necessary to hold the */
3440 /* largest allowable frame size. Note: If the max frame size is */
3441 /* not an even multiple of the DMA buffer size then we need to */
3442 /* round the buffer count per frame up one. */
3443
3444 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3445 if ( info->max_frame_size % SCABUFSIZE )
3446 BuffersPerFrame++;
3447
3448 /* calculate total number of data buffers (SCABUFSIZE) possible
3449 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3450 * for the descriptor list (BUFFERLISTSIZE).
3451 */
3452 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3453
3454 /* limit number of buffers to maximum amount of descriptors */
3455 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3456 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3457
3458 /* use enough buffers to transmit one max size frame */
3459 info->tx_buf_count = BuffersPerFrame + 1;
3460
3461 /* never use more than half the available buffers for transmit */
3462 if (info->tx_buf_count > (BufferCount/2))
3463 info->tx_buf_count = BufferCount/2;
3464
3465 if (info->tx_buf_count > SCAMAXDESC)
3466 info->tx_buf_count = SCAMAXDESC;
3467
3468 /* use remaining buffers for receive */
3469 info->rx_buf_count = BufferCount - info->tx_buf_count;
3470
3471 if (info->rx_buf_count > SCAMAXDESC)
3472 info->rx_buf_count = SCAMAXDESC;
3473
3474 if ( debug_level >= DEBUG_LEVEL_INFO )
3475 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3476 __FILE__,__LINE__, info->device_name,
3477 info->tx_buf_count,info->rx_buf_count);
3478
3479 if ( alloc_buf_list( info ) < 0 ||
3480 alloc_frame_bufs(info,
3481 info->rx_buf_list,
3482 info->rx_buf_list_ex,
3483 info->rx_buf_count) < 0 ||
3484 alloc_frame_bufs(info,
3485 info->tx_buf_list,
3486 info->tx_buf_list_ex,
3487 info->tx_buf_count) < 0 ||
3488 alloc_tmp_rx_buf(info) < 0 ) {
3489 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3490 __FILE__,__LINE__, info->device_name);
3491 return -ENOMEM;
3492 }
3493
3494 rx_reset_buffers( info );
3495
3496 return 0;
3497}
3498
3499/* Allocate DMA buffers for the transmit and receive descriptor lists.
3500 */
3501int alloc_buf_list(SLMP_INFO *info)
3502{
3503 unsigned int i;
3504
3505 /* build list in adapter shared memory */
3506 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3507 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3508 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3509
3510 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3511
3512 /* Save virtual address pointers to the receive and */
3513 /* transmit buffer lists. (Receive 1st). These pointers will */
3514 /* be used by the processor to access the lists. */
3515 info->rx_buf_list = (SCADESC *)info->buffer_list;
3516
3517 info->tx_buf_list = (SCADESC *)info->buffer_list;
3518 info->tx_buf_list += info->rx_buf_count;
3519
3520 /* Build links for circular buffer entry lists (tx and rx)
3521 *
3522 * Note: links are physical addresses read by the SCA device
3523 * to determine the next buffer entry to use.
3524 */
3525
3526 for ( i = 0; i < info->rx_buf_count; i++ ) {
3527 /* calculate and store physical address of this buffer entry */
3528 info->rx_buf_list_ex[i].phys_entry =
3529 info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3530
3531 /* calculate and store physical address of */
3532 /* next entry in cirular list of entries */
3533 info->rx_buf_list[i].next = info->buffer_list_phys;
3534 if ( i < info->rx_buf_count - 1 )
3535 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3536
3537 info->rx_buf_list[i].length = SCABUFSIZE;
3538 }
3539
3540 for ( i = 0; i < info->tx_buf_count; i++ ) {
3541 /* calculate and store physical address of this buffer entry */
3542 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3543 ((info->rx_buf_count + i) * sizeof(SCADESC));
3544
3545 /* calculate and store physical address of */
3546 /* next entry in cirular list of entries */
3547
3548 info->tx_buf_list[i].next = info->buffer_list_phys +
3549 info->rx_buf_count * sizeof(SCADESC);
3550
3551 if ( i < info->tx_buf_count - 1 )
3552 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3553 }
3554
3555 return 0;
3556}
3557
3558/* Allocate the frame DMA buffers used by the specified buffer list.
3559 */
3560int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3561{
3562 int i;
3563 unsigned long phys_addr;
3564
3565 for ( i = 0; i < count; i++ ) {
3566 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3567 phys_addr = info->port_array[0]->last_mem_alloc;
3568 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3569
3570 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3571 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3572 }
3573
3574 return 0;
3575}
3576
3577void free_dma_bufs(SLMP_INFO *info)
3578{
3579 info->buffer_list = NULL;
3580 info->rx_buf_list = NULL;
3581 info->tx_buf_list = NULL;
3582}
3583
3584/* allocate buffer large enough to hold max_frame_size.
3585 * This buffer is used to pass an assembled frame to the line discipline.
3586 */
3587int alloc_tmp_rx_buf(SLMP_INFO *info)
3588{
3589 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3590 if (info->tmp_rx_buf == NULL)
3591 return -ENOMEM;
3592 return 0;
3593}
3594
3595void free_tmp_rx_buf(SLMP_INFO *info)
3596{
Jesper Juhl735d5662005-11-07 01:01:29 -08003597 kfree(info->tmp_rx_buf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003598 info->tmp_rx_buf = NULL;
3599}
3600
3601int claim_resources(SLMP_INFO *info)
3602{
3603 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3604 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3605 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3606 info->init_error = DiagStatus_AddressConflict;
3607 goto errout;
3608 }
3609 else
3610 info->shared_mem_requested = 1;
3611
3612 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3613 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3614 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3615 info->init_error = DiagStatus_AddressConflict;
3616 goto errout;
3617 }
3618 else
3619 info->lcr_mem_requested = 1;
3620
3621 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3622 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3623 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3624 info->init_error = DiagStatus_AddressConflict;
3625 goto errout;
3626 }
3627 else
3628 info->sca_base_requested = 1;
3629
3630 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3631 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3632 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3633 info->init_error = DiagStatus_AddressConflict;
3634 goto errout;
3635 }
3636 else
3637 info->sca_statctrl_requested = 1;
3638
3639 info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
3640 if (!info->memory_base) {
3641 printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
3642 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3643 info->init_error = DiagStatus_CantAssignPciResources;
3644 goto errout;
3645 }
3646
3647 info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE);
3648 if (!info->lcr_base) {
3649 printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
3650 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3651 info->init_error = DiagStatus_CantAssignPciResources;
3652 goto errout;
3653 }
3654 info->lcr_base += info->lcr_offset;
3655
3656 info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE);
3657 if (!info->sca_base) {
3658 printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
3659 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3660 info->init_error = DiagStatus_CantAssignPciResources;
3661 goto errout;
3662 }
3663 info->sca_base += info->sca_offset;
3664
3665 info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE);
3666 if (!info->statctrl_base) {
3667 printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
3668 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3669 info->init_error = DiagStatus_CantAssignPciResources;
3670 goto errout;
3671 }
3672 info->statctrl_base += info->statctrl_offset;
3673
3674 if ( !memory_test(info) ) {
3675 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3676 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3677 info->init_error = DiagStatus_MemoryError;
3678 goto errout;
3679 }
3680
3681 return 0;
3682
3683errout:
3684 release_resources( info );
3685 return -ENODEV;
3686}
3687
3688void release_resources(SLMP_INFO *info)
3689{
3690 if ( debug_level >= DEBUG_LEVEL_INFO )
3691 printk( "%s(%d):%s release_resources() entry\n",
3692 __FILE__,__LINE__,info->device_name );
3693
3694 if ( info->irq_requested ) {
3695 free_irq(info->irq_level, info);
3696 info->irq_requested = 0;
3697 }
3698
3699 if ( info->shared_mem_requested ) {
3700 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3701 info->shared_mem_requested = 0;
3702 }
3703 if ( info->lcr_mem_requested ) {
3704 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3705 info->lcr_mem_requested = 0;
3706 }
3707 if ( info->sca_base_requested ) {
3708 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3709 info->sca_base_requested = 0;
3710 }
3711 if ( info->sca_statctrl_requested ) {
3712 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3713 info->sca_statctrl_requested = 0;
3714 }
3715
3716 if (info->memory_base){
3717 iounmap(info->memory_base);
3718 info->memory_base = NULL;
3719 }
3720
3721 if (info->sca_base) {
3722 iounmap(info->sca_base - info->sca_offset);
3723 info->sca_base=NULL;
3724 }
3725
3726 if (info->statctrl_base) {
3727 iounmap(info->statctrl_base - info->statctrl_offset);
3728 info->statctrl_base=NULL;
3729 }
3730
3731 if (info->lcr_base){
3732 iounmap(info->lcr_base - info->lcr_offset);
3733 info->lcr_base = NULL;
3734 }
3735
3736 if ( debug_level >= DEBUG_LEVEL_INFO )
3737 printk( "%s(%d):%s release_resources() exit\n",
3738 __FILE__,__LINE__,info->device_name );
3739}
3740
3741/* Add the specified device instance data structure to the
3742 * global linked list of devices and increment the device count.
3743 */
3744void add_device(SLMP_INFO *info)
3745{
3746 info->next_device = NULL;
3747 info->line = synclinkmp_device_count;
3748 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3749
3750 if (info->line < MAX_DEVICES) {
3751 if (maxframe[info->line])
3752 info->max_frame_size = maxframe[info->line];
3753 info->dosyncppp = dosyncppp[info->line];
3754 }
3755
3756 synclinkmp_device_count++;
3757
3758 if ( !synclinkmp_device_list )
3759 synclinkmp_device_list = info;
3760 else {
3761 SLMP_INFO *current_dev = synclinkmp_device_list;
3762 while( current_dev->next_device )
3763 current_dev = current_dev->next_device;
3764 current_dev->next_device = info;
3765 }
3766
3767 if ( info->max_frame_size < 4096 )
3768 info->max_frame_size = 4096;
3769 else if ( info->max_frame_size > 65535 )
3770 info->max_frame_size = 65535;
3771
3772 printk( "SyncLink MultiPort %s: "
3773 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3774 info->device_name,
3775 info->phys_sca_base,
3776 info->phys_memory_base,
3777 info->phys_statctrl_base,
3778 info->phys_lcr_base,
3779 info->irq_level,
3780 info->max_frame_size );
3781
3782#ifdef CONFIG_HDLC
3783 hdlcdev_init(info);
3784#endif
3785}
3786
3787/* Allocate and initialize a device instance structure
3788 *
3789 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3790 */
3791static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3792{
3793 SLMP_INFO *info;
3794
3795 info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
3796 GFP_KERNEL);
3797
3798 if (!info) {
3799 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3800 __FILE__,__LINE__, adapter_num, port_num);
3801 } else {
3802 memset(info, 0, sizeof(SLMP_INFO));
3803 info->magic = MGSL_MAGIC;
3804 INIT_WORK(&info->task, bh_handler, info);
3805 info->max_frame_size = 4096;
3806 info->close_delay = 5*HZ/10;
3807 info->closing_wait = 30*HZ;
3808 init_waitqueue_head(&info->open_wait);
3809 init_waitqueue_head(&info->close_wait);
3810 init_waitqueue_head(&info->status_event_wait_q);
3811 init_waitqueue_head(&info->event_wait_q);
3812 spin_lock_init(&info->netlock);
3813 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3814 info->idle_mode = HDLC_TXIDLE_FLAGS;
3815 info->adapter_num = adapter_num;
3816 info->port_num = port_num;
3817
3818 /* Copy configuration info to device instance data */
3819 info->irq_level = pdev->irq;
3820 info->phys_lcr_base = pci_resource_start(pdev,0);
3821 info->phys_sca_base = pci_resource_start(pdev,2);
3822 info->phys_memory_base = pci_resource_start(pdev,3);
3823 info->phys_statctrl_base = pci_resource_start(pdev,4);
3824
3825 /* Because veremap only works on page boundaries we must map
3826 * a larger area than is actually implemented for the LCR
3827 * memory range. We map a full page starting at the page boundary.
3828 */
3829 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3830 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3831
3832 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3833 info->phys_sca_base &= ~(PAGE_SIZE-1);
3834
3835 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3836 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3837
3838 info->bus_type = MGSL_BUS_TYPE_PCI;
3839 info->irq_flags = SA_SHIRQ;
3840
3841 init_timer(&info->tx_timer);
3842 info->tx_timer.data = (unsigned long)info;
3843 info->tx_timer.function = tx_timeout;
3844
3845 init_timer(&info->status_timer);
3846 info->status_timer.data = (unsigned long)info;
3847 info->status_timer.function = status_timeout;
3848
3849 /* Store the PCI9050 misc control register value because a flaw
3850 * in the PCI9050 prevents LCR registers from being read if
3851 * BIOS assigns an LCR base address with bit 7 set.
3852 *
3853 * Only the misc control register is accessed for which only
3854 * write access is needed, so set an initial value and change
3855 * bits to the device instance data as we write the value
3856 * to the actual misc control register.
3857 */
3858 info->misc_ctrl_value = 0x087e4546;
3859
3860 /* initial port state is unknown - if startup errors
3861 * occur, init_error will be set to indicate the
3862 * problem. Once the port is fully initialized,
3863 * this value will be set to 0 to indicate the
3864 * port is available.
3865 */
3866 info->init_error = -1;
3867 }
3868
3869 return info;
3870}
3871
3872void device_init(int adapter_num, struct pci_dev *pdev)
3873{
3874 SLMP_INFO *port_array[SCA_MAX_PORTS];
3875 int port;
3876
3877 /* allocate device instances for up to SCA_MAX_PORTS devices */
3878 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3879 port_array[port] = alloc_dev(adapter_num,port,pdev);
3880 if( port_array[port] == NULL ) {
3881 for ( --port; port >= 0; --port )
3882 kfree(port_array[port]);
3883 return;
3884 }
3885 }
3886
3887 /* give copy of port_array to all ports and add to device list */
3888 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3889 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3890 add_device( port_array[port] );
3891 spin_lock_init(&port_array[port]->lock);
3892 }
3893
3894 /* Allocate and claim adapter resources */
3895 if ( !claim_resources(port_array[0]) ) {
3896
3897 alloc_dma_bufs(port_array[0]);
3898
3899 /* copy resource information from first port to others */
3900 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3901 port_array[port]->lock = port_array[0]->lock;
3902 port_array[port]->irq_level = port_array[0]->irq_level;
3903 port_array[port]->memory_base = port_array[0]->memory_base;
3904 port_array[port]->sca_base = port_array[0]->sca_base;
3905 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3906 port_array[port]->lcr_base = port_array[0]->lcr_base;
3907 alloc_dma_bufs(port_array[port]);
3908 }
3909
3910 if ( request_irq(port_array[0]->irq_level,
3911 synclinkmp_interrupt,
3912 port_array[0]->irq_flags,
3913 port_array[0]->device_name,
3914 port_array[0]) < 0 ) {
3915 printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
3916 __FILE__,__LINE__,
3917 port_array[0]->device_name,
3918 port_array[0]->irq_level );
3919 }
3920 else {
3921 port_array[0]->irq_requested = 1;
3922 adapter_test(port_array[0]);
3923 }
3924 }
3925}
3926
3927static struct tty_operations ops = {
3928 .open = open,
3929 .close = close,
3930 .write = write,
3931 .put_char = put_char,
3932 .flush_chars = flush_chars,
3933 .write_room = write_room,
3934 .chars_in_buffer = chars_in_buffer,
3935 .flush_buffer = flush_buffer,
3936 .ioctl = ioctl,
3937 .throttle = throttle,
3938 .unthrottle = unthrottle,
3939 .send_xchar = send_xchar,
3940 .break_ctl = set_break,
3941 .wait_until_sent = wait_until_sent,
3942 .read_proc = read_proc,
3943 .set_termios = set_termios,
3944 .stop = tx_hold,
3945 .start = tx_release,
3946 .hangup = hangup,
3947 .tiocmget = tiocmget,
3948 .tiocmset = tiocmset,
3949};
3950
3951static void synclinkmp_cleanup(void)
3952{
3953 int rc;
3954 SLMP_INFO *info;
3955 SLMP_INFO *tmp;
3956
3957 printk("Unloading %s %s\n", driver_name, driver_version);
3958
3959 if (serial_driver) {
3960 if ((rc = tty_unregister_driver(serial_driver)))
3961 printk("%s(%d) failed to unregister tty driver err=%d\n",
3962 __FILE__,__LINE__,rc);
3963 put_tty_driver(serial_driver);
3964 }
3965
3966 /* reset devices */
3967 info = synclinkmp_device_list;
3968 while(info) {
3969 reset_port(info);
3970 info = info->next_device;
3971 }
3972
3973 /* release devices */
3974 info = synclinkmp_device_list;
3975 while(info) {
3976#ifdef CONFIG_HDLC
3977 hdlcdev_exit(info);
3978#endif
3979 free_dma_bufs(info);
3980 free_tmp_rx_buf(info);
3981 if ( info->port_num == 0 ) {
3982 if (info->sca_base)
3983 write_reg(info, LPR, 1); /* set low power mode */
3984 release_resources(info);
3985 }
3986 tmp = info;
3987 info = info->next_device;
3988 kfree(tmp);
3989 }
3990
3991 pci_unregister_driver(&synclinkmp_pci_driver);
3992}
3993
3994/* Driver initialization entry point.
3995 */
3996
3997static int __init synclinkmp_init(void)
3998{
3999 int rc;
4000
4001 if (break_on_load) {
4002 synclinkmp_get_text_ptr();
4003 BREAKPOINT();
4004 }
4005
4006 printk("%s %s\n", driver_name, driver_version);
4007
4008 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
4009 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4010 return rc;
4011 }
4012
4013 serial_driver = alloc_tty_driver(128);
4014 if (!serial_driver) {
4015 rc = -ENOMEM;
4016 goto error;
4017 }
4018
4019 /* Initialize the tty_driver structure */
4020
4021 serial_driver->owner = THIS_MODULE;
4022 serial_driver->driver_name = "synclinkmp";
4023 serial_driver->name = "ttySLM";
4024 serial_driver->major = ttymajor;
4025 serial_driver->minor_start = 64;
4026 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4027 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4028 serial_driver->init_termios = tty_std_termios;
4029 serial_driver->init_termios.c_cflag =
4030 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4031 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4032 tty_set_operations(serial_driver, &ops);
4033 if ((rc = tty_register_driver(serial_driver)) < 0) {
4034 printk("%s(%d):Couldn't register serial driver\n",
4035 __FILE__,__LINE__);
4036 put_tty_driver(serial_driver);
4037 serial_driver = NULL;
4038 goto error;
4039 }
4040
4041 printk("%s %s, tty major#%d\n",
4042 driver_name, driver_version,
4043 serial_driver->major);
4044
4045 return 0;
4046
4047error:
4048 synclinkmp_cleanup();
4049 return rc;
4050}
4051
4052static void __exit synclinkmp_exit(void)
4053{
4054 synclinkmp_cleanup();
4055}
4056
4057module_init(synclinkmp_init);
4058module_exit(synclinkmp_exit);
4059
4060/* Set the port for internal loopback mode.
4061 * The TxCLK and RxCLK signals are generated from the BRG and
4062 * the TxD is looped back to the RxD internally.
4063 */
4064void enable_loopback(SLMP_INFO *info, int enable)
4065{
4066 if (enable) {
4067 /* MD2 (Mode Register 2)
4068 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4069 */
4070 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4071
4072 /* degate external TxC clock source */
4073 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4074 write_control_reg(info);
4075
4076 /* RXS/TXS (Rx/Tx clock source)
4077 * 07 Reserved, must be 0
4078 * 06..04 Clock Source, 100=BRG
4079 * 03..00 Clock Divisor, 0000=1
4080 */
4081 write_reg(info, RXS, 0x40);
4082 write_reg(info, TXS, 0x40);
4083
4084 } else {
4085 /* MD2 (Mode Register 2)
4086 * 01..00 CNCT<1..0> Channel connection, 0=normal
4087 */
4088 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4089
4090 /* RXS/TXS (Rx/Tx clock source)
4091 * 07 Reserved, must be 0
4092 * 06..04 Clock Source, 000=RxC/TxC Pin
4093 * 03..00 Clock Divisor, 0000=1
4094 */
4095 write_reg(info, RXS, 0x00);
4096 write_reg(info, TXS, 0x00);
4097 }
4098
4099 /* set LinkSpeed if available, otherwise default to 2Mbps */
4100 if (info->params.clock_speed)
4101 set_rate(info, info->params.clock_speed);
4102 else
4103 set_rate(info, 3686400);
4104}
4105
4106/* Set the baud rate register to the desired speed
4107 *
4108 * data_rate data rate of clock in bits per second
4109 * A data rate of 0 disables the AUX clock.
4110 */
4111void set_rate( SLMP_INFO *info, u32 data_rate )
4112{
4113 u32 TMCValue;
4114 unsigned char BRValue;
4115 u32 Divisor=0;
4116
4117 /* fBRG = fCLK/(TMC * 2^BR)
4118 */
4119 if (data_rate != 0) {
4120 Divisor = 14745600/data_rate;
4121 if (!Divisor)
4122 Divisor = 1;
4123
4124 TMCValue = Divisor;
4125
4126 BRValue = 0;
4127 if (TMCValue != 1 && TMCValue != 2) {
4128 /* BRValue of 0 provides 50/50 duty cycle *only* when
4129 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4130 * 50/50 duty cycle.
4131 */
4132 BRValue = 1;
4133 TMCValue >>= 1;
4134 }
4135
4136 /* while TMCValue is too big for TMC register, divide
4137 * by 2 and increment BR exponent.
4138 */
4139 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4140 TMCValue >>= 1;
4141
4142 write_reg(info, TXS,
4143 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4144 write_reg(info, RXS,
4145 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4146 write_reg(info, TMC, (unsigned char)TMCValue);
4147 }
4148 else {
4149 write_reg(info, TXS,0);
4150 write_reg(info, RXS,0);
4151 write_reg(info, TMC, 0);
4152 }
4153}
4154
4155/* Disable receiver
4156 */
4157void rx_stop(SLMP_INFO *info)
4158{
4159 if (debug_level >= DEBUG_LEVEL_ISR)
4160 printk("%s(%d):%s rx_stop()\n",
4161 __FILE__,__LINE__, info->device_name );
4162
4163 write_reg(info, CMD, RXRESET);
4164
4165 info->ie0_value &= ~RXRDYE;
4166 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4167
4168 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4169 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4170 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4171
4172 info->rx_enabled = 0;
4173 info->rx_overflow = 0;
4174}
4175
4176/* enable the receiver
4177 */
4178void rx_start(SLMP_INFO *info)
4179{
4180 int i;
4181
4182 if (debug_level >= DEBUG_LEVEL_ISR)
4183 printk("%s(%d):%s rx_start()\n",
4184 __FILE__,__LINE__, info->device_name );
4185
4186 write_reg(info, CMD, RXRESET);
4187
4188 if ( info->params.mode == MGSL_MODE_HDLC ) {
4189 /* HDLC, disabe IRQ on rxdata */
4190 info->ie0_value &= ~RXRDYE;
4191 write_reg(info, IE0, info->ie0_value);
4192
4193 /* Reset all Rx DMA buffers and program rx dma */
4194 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4195 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4196
4197 for (i = 0; i < info->rx_buf_count; i++) {
4198 info->rx_buf_list[i].status = 0xff;
4199
4200 // throttle to 4 shared memory writes at a time to prevent
4201 // hogging local bus (keep latency time for DMA requests low).
4202 if (!(i % 4))
4203 read_status_reg(info);
4204 }
4205 info->current_rx_buf = 0;
4206
4207 /* set current/1st descriptor address */
4208 write_reg16(info, RXDMA + CDA,
4209 info->rx_buf_list_ex[0].phys_entry);
4210
4211 /* set new last rx descriptor address */
4212 write_reg16(info, RXDMA + EDA,
4213 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4214
4215 /* set buffer length (shared by all rx dma data buffers) */
4216 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4217
4218 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4219 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4220 } else {
4221 /* async, enable IRQ on rxdata */
4222 info->ie0_value |= RXRDYE;
4223 write_reg(info, IE0, info->ie0_value);
4224 }
4225
4226 write_reg(info, CMD, RXENABLE);
4227
4228 info->rx_overflow = FALSE;
4229 info->rx_enabled = 1;
4230}
4231
4232/* Enable the transmitter and send a transmit frame if
4233 * one is loaded in the DMA buffers.
4234 */
4235void tx_start(SLMP_INFO *info)
4236{
4237 if (debug_level >= DEBUG_LEVEL_ISR)
4238 printk("%s(%d):%s tx_start() tx_count=%d\n",
4239 __FILE__,__LINE__, info->device_name,info->tx_count );
4240
4241 if (!info->tx_enabled ) {
4242 write_reg(info, CMD, TXRESET);
4243 write_reg(info, CMD, TXENABLE);
4244 info->tx_enabled = TRUE;
4245 }
4246
4247 if ( info->tx_count ) {
4248
4249 /* If auto RTS enabled and RTS is inactive, then assert */
4250 /* RTS and set a flag indicating that the driver should */
4251 /* negate RTS when the transmission completes. */
4252
4253 info->drop_rts_on_tx_done = 0;
4254
4255 if (info->params.mode != MGSL_MODE_ASYNC) {
4256
4257 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4258 get_signals( info );
4259 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4260 info->serial_signals |= SerialSignal_RTS;
4261 set_signals( info );
4262 info->drop_rts_on_tx_done = 1;
4263 }
4264 }
4265
4266 write_reg16(info, TRC0,
4267 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4268
4269 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4270 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4271
4272 /* set TX CDA (current descriptor address) */
4273 write_reg16(info, TXDMA + CDA,
4274 info->tx_buf_list_ex[0].phys_entry);
4275
4276 /* set TX EDA (last descriptor address) */
4277 write_reg16(info, TXDMA + EDA,
4278 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4279
4280 /* enable underrun IRQ */
4281 info->ie1_value &= ~IDLE;
4282 info->ie1_value |= UDRN;
4283 write_reg(info, IE1, info->ie1_value);
4284 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4285
4286 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4287 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4288
4289 info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
4290 add_timer(&info->tx_timer);
4291 }
4292 else {
4293 tx_load_fifo(info);
4294 /* async, enable IRQ on txdata */
4295 info->ie0_value |= TXRDYE;
4296 write_reg(info, IE0, info->ie0_value);
4297 }
4298
4299 info->tx_active = 1;
4300 }
4301}
4302
4303/* stop the transmitter and DMA
4304 */
4305void tx_stop( SLMP_INFO *info )
4306{
4307 if (debug_level >= DEBUG_LEVEL_ISR)
4308 printk("%s(%d):%s tx_stop()\n",
4309 __FILE__,__LINE__, info->device_name );
4310
4311 del_timer(&info->tx_timer);
4312
4313 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4314 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4315
4316 write_reg(info, CMD, TXRESET);
4317
4318 info->ie1_value &= ~(UDRN + IDLE);
4319 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4320 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4321
4322 info->ie0_value &= ~TXRDYE;
4323 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4324
4325 info->tx_enabled = 0;
4326 info->tx_active = 0;
4327}
4328
4329/* Fill the transmit FIFO until the FIFO is full or
4330 * there is no more data to load.
4331 */
4332void tx_load_fifo(SLMP_INFO *info)
4333{
4334 u8 TwoBytes[2];
4335
4336 /* do nothing is now tx data available and no XON/XOFF pending */
4337
4338 if ( !info->tx_count && !info->x_char )
4339 return;
4340
4341 /* load the Transmit FIFO until FIFOs full or all data sent */
4342
4343 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4344
4345 /* there is more space in the transmit FIFO and */
4346 /* there is more data in transmit buffer */
4347
4348 if ( (info->tx_count > 1) && !info->x_char ) {
4349 /* write 16-bits */
4350 TwoBytes[0] = info->tx_buf[info->tx_get++];
4351 if (info->tx_get >= info->max_frame_size)
4352 info->tx_get -= info->max_frame_size;
4353 TwoBytes[1] = info->tx_buf[info->tx_get++];
4354 if (info->tx_get >= info->max_frame_size)
4355 info->tx_get -= info->max_frame_size;
4356
4357 write_reg16(info, TRB, *((u16 *)TwoBytes));
4358
4359 info->tx_count -= 2;
4360 info->icount.tx += 2;
4361 } else {
4362 /* only 1 byte left to transmit or 1 FIFO slot left */
4363
4364 if (info->x_char) {
4365 /* transmit pending high priority char */
4366 write_reg(info, TRB, info->x_char);
4367 info->x_char = 0;
4368 } else {
4369 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4370 if (info->tx_get >= info->max_frame_size)
4371 info->tx_get -= info->max_frame_size;
4372 info->tx_count--;
4373 }
4374 info->icount.tx++;
4375 }
4376 }
4377}
4378
4379/* Reset a port to a known state
4380 */
4381void reset_port(SLMP_INFO *info)
4382{
4383 if (info->sca_base) {
4384
4385 tx_stop(info);
4386 rx_stop(info);
4387
4388 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4389 set_signals(info);
4390
4391 /* disable all port interrupts */
4392 info->ie0_value = 0;
4393 info->ie1_value = 0;
4394 info->ie2_value = 0;
4395 write_reg(info, IE0, info->ie0_value);
4396 write_reg(info, IE1, info->ie1_value);
4397 write_reg(info, IE2, info->ie2_value);
4398
4399 write_reg(info, CMD, CHRESET);
4400 }
4401}
4402
4403/* Reset all the ports to a known state.
4404 */
4405void reset_adapter(SLMP_INFO *info)
4406{
4407 int i;
4408
4409 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4410 if (info->port_array[i])
4411 reset_port(info->port_array[i]);
4412 }
4413}
4414
4415/* Program port for asynchronous communications.
4416 */
4417void async_mode(SLMP_INFO *info)
4418{
4419
4420 unsigned char RegValue;
4421
4422 tx_stop(info);
4423 rx_stop(info);
4424
4425 /* MD0, Mode Register 0
4426 *
4427 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4428 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4429 * 03 Reserved, must be 0
4430 * 02 CRCCC, CRC Calculation, 0=disabled
4431 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4432 *
4433 * 0000 0000
4434 */
4435 RegValue = 0x00;
4436 if (info->params.stop_bits != 1)
4437 RegValue |= BIT1;
4438 write_reg(info, MD0, RegValue);
4439
4440 /* MD1, Mode Register 1
4441 *
4442 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4443 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4444 * 03..02 RXCHR<1..0>, rx char size
4445 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4446 *
4447 * 0100 0000
4448 */
4449 RegValue = 0x40;
4450 switch (info->params.data_bits) {
4451 case 7: RegValue |= BIT4 + BIT2; break;
4452 case 6: RegValue |= BIT5 + BIT3; break;
4453 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4454 }
4455 if (info->params.parity != ASYNC_PARITY_NONE) {
4456 RegValue |= BIT1;
4457 if (info->params.parity == ASYNC_PARITY_ODD)
4458 RegValue |= BIT0;
4459 }
4460 write_reg(info, MD1, RegValue);
4461
4462 /* MD2, Mode Register 2
4463 *
4464 * 07..02 Reserved, must be 0
Paul Fulghum6e8dcee2005-09-09 13:02:17 -07004465 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
Linus Torvalds1da177e2005-04-16 15:20:36 -07004466 *
4467 * 0000 0000
4468 */
4469 RegValue = 0x00;
Paul Fulghum6e8dcee2005-09-09 13:02:17 -07004470 if (info->params.loopback)
4471 RegValue |= (BIT1 + BIT0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004472 write_reg(info, MD2, RegValue);
4473
4474 /* RXS, Receive clock source
4475 *
4476 * 07 Reserved, must be 0
4477 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4478 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4479 */
4480 RegValue=BIT6;
4481 write_reg(info, RXS, RegValue);
4482
4483 /* TXS, Transmit clock source
4484 *
4485 * 07 Reserved, must be 0
4486 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4487 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4488 */
4489 RegValue=BIT6;
4490 write_reg(info, TXS, RegValue);
4491
4492 /* Control Register
4493 *
4494 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4495 */
4496 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4497 write_control_reg(info);
4498
4499 tx_set_idle(info);
4500
4501 /* RRC Receive Ready Control 0
4502 *
4503 * 07..05 Reserved, must be 0
4504 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4505 */
4506 write_reg(info, RRC, 0x00);
4507
4508 /* TRC0 Transmit Ready Control 0
4509 *
4510 * 07..05 Reserved, must be 0
4511 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4512 */
4513 write_reg(info, TRC0, 0x10);
4514
4515 /* TRC1 Transmit Ready Control 1
4516 *
4517 * 07..05 Reserved, must be 0
4518 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4519 */
4520 write_reg(info, TRC1, 0x1e);
4521
4522 /* CTL, MSCI control register
4523 *
4524 * 07..06 Reserved, set to 0
4525 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4526 * 04 IDLC, idle control, 0=mark 1=idle register
4527 * 03 BRK, break, 0=off 1 =on (async)
4528 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4529 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4530 * 00 RTS, RTS output control, 0=active 1=inactive
4531 *
4532 * 0001 0001
4533 */
4534 RegValue = 0x10;
4535 if (!(info->serial_signals & SerialSignal_RTS))
4536 RegValue |= 0x01;
4537 write_reg(info, CTL, RegValue);
4538
4539 /* enable status interrupts */
4540 info->ie0_value |= TXINTE + RXINTE;
4541 write_reg(info, IE0, info->ie0_value);
4542
4543 /* enable break detect interrupt */
4544 info->ie1_value = BRKD;
4545 write_reg(info, IE1, info->ie1_value);
4546
4547 /* enable rx overrun interrupt */
4548 info->ie2_value = OVRN;
4549 write_reg(info, IE2, info->ie2_value);
4550
4551 set_rate( info, info->params.data_rate * 16 );
Linus Torvalds1da177e2005-04-16 15:20:36 -07004552}
4553
4554/* Program the SCA for HDLC communications.
4555 */
4556void hdlc_mode(SLMP_INFO *info)
4557{
4558 unsigned char RegValue;
4559 u32 DpllDivisor;
4560
4561 // Can't use DPLL because SCA outputs recovered clock on RxC when
4562 // DPLL mode selected. This causes output contention with RxC receiver.
4563 // Use of DPLL would require external hardware to disable RxC receiver
4564 // when DPLL mode selected.
4565 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4566
4567 /* disable DMA interrupts */
4568 write_reg(info, TXDMA + DIR, 0);
4569 write_reg(info, RXDMA + DIR, 0);
4570
4571 /* MD0, Mode Register 0
4572 *
4573 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4574 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4575 * 03 Reserved, must be 0
4576 * 02 CRCCC, CRC Calculation, 1=enabled
4577 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4578 * 00 CRC0, CRC initial value, 1 = all 1s
4579 *
4580 * 1000 0001
4581 */
4582 RegValue = 0x81;
4583 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4584 RegValue |= BIT4;
4585 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4586 RegValue |= BIT4;
4587 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4588 RegValue |= BIT2 + BIT1;
4589 write_reg(info, MD0, RegValue);
4590
4591 /* MD1, Mode Register 1
4592 *
4593 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4594 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4595 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4596 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4597 *
4598 * 0000 0000
4599 */
4600 RegValue = 0x00;
4601 write_reg(info, MD1, RegValue);
4602
4603 /* MD2, Mode Register 2
4604 *
4605 * 07 NRZFM, 0=NRZ, 1=FM
4606 * 06..05 CODE<1..0> Encoding, 00=NRZ
4607 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4608 * 02 Reserved, must be 0
4609 * 01..00 CNCT<1..0> Channel connection, 0=normal
4610 *
4611 * 0000 0000
4612 */
4613 RegValue = 0x00;
4614 switch(info->params.encoding) {
4615 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4616 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4617 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4618 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4619#if 0
4620 case HDLC_ENCODING_NRZB: /* not supported */
4621 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4622 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4623#endif
4624 }
4625 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4626 DpllDivisor = 16;
4627 RegValue |= BIT3;
4628 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4629 DpllDivisor = 8;
4630 } else {
4631 DpllDivisor = 32;
4632 RegValue |= BIT4;
4633 }
4634 write_reg(info, MD2, RegValue);
4635
4636
4637 /* RXS, Receive clock source
4638 *
4639 * 07 Reserved, must be 0
4640 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4641 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4642 */
4643 RegValue=0;
4644 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4645 RegValue |= BIT6;
4646 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4647 RegValue |= BIT6 + BIT5;
4648 write_reg(info, RXS, RegValue);
4649
4650 /* TXS, Transmit clock source
4651 *
4652 * 07 Reserved, must be 0
4653 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4654 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4655 */
4656 RegValue=0;
4657 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4658 RegValue |= BIT6;
4659 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4660 RegValue |= BIT6 + BIT5;
4661 write_reg(info, TXS, RegValue);
4662
4663 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4664 set_rate(info, info->params.clock_speed * DpllDivisor);
4665 else
4666 set_rate(info, info->params.clock_speed);
4667
4668 /* GPDATA (General Purpose I/O Data Register)
4669 *
4670 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4671 */
4672 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4673 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4674 else
4675 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4676 write_control_reg(info);
4677
4678 /* RRC Receive Ready Control 0
4679 *
4680 * 07..05 Reserved, must be 0
4681 * 04..00 RRC<4..0> Rx FIFO trigger active
4682 */
4683 write_reg(info, RRC, rx_active_fifo_level);
4684
4685 /* TRC0 Transmit Ready Control 0
4686 *
4687 * 07..05 Reserved, must be 0
4688 * 04..00 TRC<4..0> Tx FIFO trigger active
4689 */
4690 write_reg(info, TRC0, tx_active_fifo_level);
4691
4692 /* TRC1 Transmit Ready Control 1
4693 *
4694 * 07..05 Reserved, must be 0
4695 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4696 */
4697 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4698
4699 /* DMR, DMA Mode Register
4700 *
4701 * 07..05 Reserved, must be 0
4702 * 04 TMOD, Transfer Mode: 1=chained-block
4703 * 03 Reserved, must be 0
4704 * 02 NF, Number of Frames: 1=multi-frame
4705 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4706 * 00 Reserved, must be 0
4707 *
4708 * 0001 0100
4709 */
4710 write_reg(info, TXDMA + DMR, 0x14);
4711 write_reg(info, RXDMA + DMR, 0x14);
4712
4713 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4714 write_reg(info, RXDMA + CPB,
4715 (unsigned char)(info->buffer_list_phys >> 16));
4716
4717 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4718 write_reg(info, TXDMA + CPB,
4719 (unsigned char)(info->buffer_list_phys >> 16));
4720
4721 /* enable status interrupts. other code enables/disables
4722 * the individual sources for these two interrupt classes.
4723 */
4724 info->ie0_value |= TXINTE + RXINTE;
4725 write_reg(info, IE0, info->ie0_value);
4726
4727 /* CTL, MSCI control register
4728 *
4729 * 07..06 Reserved, set to 0
4730 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4731 * 04 IDLC, idle control, 0=mark 1=idle register
4732 * 03 BRK, break, 0=off 1 =on (async)
4733 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4734 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4735 * 00 RTS, RTS output control, 0=active 1=inactive
4736 *
4737 * 0001 0001
4738 */
4739 RegValue = 0x10;
4740 if (!(info->serial_signals & SerialSignal_RTS))
4741 RegValue |= 0x01;
4742 write_reg(info, CTL, RegValue);
4743
4744 /* preamble not supported ! */
4745
4746 tx_set_idle(info);
4747 tx_stop(info);
4748 rx_stop(info);
4749
4750 set_rate(info, info->params.clock_speed);
4751
4752 if (info->params.loopback)
4753 enable_loopback(info,1);
4754}
4755
4756/* Set the transmit HDLC idle mode
4757 */
4758void tx_set_idle(SLMP_INFO *info)
4759{
4760 unsigned char RegValue = 0xff;
4761
4762 /* Map API idle mode to SCA register bits */
4763 switch(info->idle_mode) {
4764 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4765 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4766 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4767 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4768 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4769 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4770 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4771 }
4772
4773 write_reg(info, IDL, RegValue);
4774}
4775
4776/* Query the adapter for the state of the V24 status (input) signals.
4777 */
4778void get_signals(SLMP_INFO *info)
4779{
4780 u16 status = read_reg(info, SR3);
4781 u16 gpstatus = read_status_reg(info);
4782 u16 testbit;
4783
4784 /* clear all serial signals except DTR and RTS */
4785 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4786
4787 /* set serial signal bits to reflect MISR */
4788
4789 if (!(status & BIT3))
4790 info->serial_signals |= SerialSignal_CTS;
4791
4792 if ( !(status & BIT2))
4793 info->serial_signals |= SerialSignal_DCD;
4794
4795 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4796 if (!(gpstatus & testbit))
4797 info->serial_signals |= SerialSignal_RI;
4798
4799 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4800 if (!(gpstatus & testbit))
4801 info->serial_signals |= SerialSignal_DSR;
4802}
4803
4804/* Set the state of DTR and RTS based on contents of
4805 * serial_signals member of device context.
4806 */
4807void set_signals(SLMP_INFO *info)
4808{
4809 unsigned char RegValue;
4810 u16 EnableBit;
4811
4812 RegValue = read_reg(info, CTL);
4813 if (info->serial_signals & SerialSignal_RTS)
4814 RegValue &= ~BIT0;
4815 else
4816 RegValue |= BIT0;
4817 write_reg(info, CTL, RegValue);
4818
4819 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4820 EnableBit = BIT1 << (info->port_num*2);
4821 if (info->serial_signals & SerialSignal_DTR)
4822 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4823 else
4824 info->port_array[0]->ctrlreg_value |= EnableBit;
4825 write_control_reg(info);
4826}
4827
4828/*******************/
4829/* DMA Buffer Code */
4830/*******************/
4831
4832/* Set the count for all receive buffers to SCABUFSIZE
4833 * and set the current buffer to the first buffer. This effectively
4834 * makes all buffers free and discards any data in buffers.
4835 */
4836void rx_reset_buffers(SLMP_INFO *info)
4837{
4838 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4839}
4840
4841/* Free the buffers used by a received frame
4842 *
4843 * info pointer to device instance data
4844 * first index of 1st receive buffer of frame
4845 * last index of last receive buffer of frame
4846 */
4847void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4848{
4849 int done = 0;
4850
4851 while(!done) {
4852 /* reset current buffer for reuse */
4853 info->rx_buf_list[first].status = 0xff;
4854
4855 if (first == last) {
4856 done = 1;
4857 /* set new last rx descriptor address */
4858 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4859 }
4860
4861 first++;
4862 if (first == info->rx_buf_count)
4863 first = 0;
4864 }
4865
4866 /* set current buffer to next buffer after last buffer of frame */
4867 info->current_rx_buf = first;
4868}
4869
4870/* Return a received frame from the receive DMA buffers.
4871 * Only frames received without errors are returned.
4872 *
4873 * Return Value: 1 if frame returned, otherwise 0
4874 */
4875int rx_get_frame(SLMP_INFO *info)
4876{
4877 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4878 unsigned short status;
4879 unsigned int framesize = 0;
4880 int ReturnCode = 0;
4881 unsigned long flags;
4882 struct tty_struct *tty = info->tty;
4883 unsigned char addr_field = 0xff;
4884 SCADESC *desc;
4885 SCADESC_EX *desc_ex;
4886
4887CheckAgain:
4888 /* assume no frame returned, set zero length */
4889 framesize = 0;
4890 addr_field = 0xff;
4891
4892 /*
4893 * current_rx_buf points to the 1st buffer of the next available
4894 * receive frame. To find the last buffer of the frame look for
4895 * a non-zero status field in the buffer entries. (The status
4896 * field is set by the 16C32 after completing a receive frame.
4897 */
4898 StartIndex = EndIndex = info->current_rx_buf;
4899
4900 for ( ;; ) {
4901 desc = &info->rx_buf_list[EndIndex];
4902 desc_ex = &info->rx_buf_list_ex[EndIndex];
4903
4904 if (desc->status == 0xff)
4905 goto Cleanup; /* current desc still in use, no frames available */
4906
4907 if (framesize == 0 && info->params.addr_filter != 0xff)
4908 addr_field = desc_ex->virt_addr[0];
4909
4910 framesize += desc->length;
4911
4912 /* Status != 0 means last buffer of frame */
4913 if (desc->status)
4914 break;
4915
4916 EndIndex++;
4917 if (EndIndex == info->rx_buf_count)
4918 EndIndex = 0;
4919
4920 if (EndIndex == info->current_rx_buf) {
4921 /* all buffers have been 'used' but none mark */
4922 /* the end of a frame. Reset buffers and receiver. */
4923 if ( info->rx_enabled ){
4924 spin_lock_irqsave(&info->lock,flags);
4925 rx_start(info);
4926 spin_unlock_irqrestore(&info->lock,flags);
4927 }
4928 goto Cleanup;
4929 }
4930
4931 }
4932
4933 /* check status of receive frame */
4934
4935 /* frame status is byte stored after frame data
4936 *
4937 * 7 EOM (end of msg), 1 = last buffer of frame
4938 * 6 Short Frame, 1 = short frame
4939 * 5 Abort, 1 = frame aborted
4940 * 4 Residue, 1 = last byte is partial
4941 * 3 Overrun, 1 = overrun occurred during frame reception
4942 * 2 CRC, 1 = CRC error detected
4943 *
4944 */
4945 status = desc->status;
4946
4947 /* ignore CRC bit if not using CRC (bit is undefined) */
4948 /* Note:CRC is not save to data buffer */
4949 if (info->params.crc_type == HDLC_CRC_NONE)
4950 status &= ~BIT2;
4951
4952 if (framesize == 0 ||
4953 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4954 /* discard 0 byte frames, this seems to occur sometime
4955 * when remote is idling flags.
4956 */
4957 rx_free_frame_buffers(info, StartIndex, EndIndex);
4958 goto CheckAgain;
4959 }
4960
4961 if (framesize < 2)
4962 status |= BIT6;
4963
4964 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4965 /* received frame has errors,
4966 * update counts and mark frame size as 0
4967 */
4968 if (status & BIT6)
4969 info->icount.rxshort++;
4970 else if (status & BIT5)
4971 info->icount.rxabort++;
4972 else if (status & BIT3)
4973 info->icount.rxover++;
4974 else
4975 info->icount.rxcrc++;
4976
4977 framesize = 0;
4978#ifdef CONFIG_HDLC
4979 {
4980 struct net_device_stats *stats = hdlc_stats(info->netdev);
4981 stats->rx_errors++;
4982 stats->rx_frame_errors++;
4983 }
4984#endif
4985 }
4986
4987 if ( debug_level >= DEBUG_LEVEL_BH )
4988 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4989 __FILE__,__LINE__,info->device_name,status,framesize);
4990
4991 if ( debug_level >= DEBUG_LEVEL_DATA )
4992 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4993 min_t(int, framesize,SCABUFSIZE),0);
4994
4995 if (framesize) {
4996 if (framesize > info->max_frame_size)
4997 info->icount.rxlong++;
4998 else {
4999 /* copy dma buffer(s) to contiguous intermediate buffer */
5000 int copy_count = framesize;
5001 int index = StartIndex;
5002 unsigned char *ptmp = info->tmp_rx_buf;
5003 info->tmp_rx_buf_count = framesize;
5004
5005 info->icount.rxok++;
5006
5007 while(copy_count) {
5008 int partial_count = min(copy_count,SCABUFSIZE);
5009 memcpy( ptmp,
5010 info->rx_buf_list_ex[index].virt_addr,
5011 partial_count );
5012 ptmp += partial_count;
5013 copy_count -= partial_count;
5014
5015 if ( ++index == info->rx_buf_count )
5016 index = 0;
5017 }
5018
5019#ifdef CONFIG_HDLC
5020 if (info->netcount)
5021 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
5022 else
5023#endif
5024 ldisc_receive_buf(tty,info->tmp_rx_buf,
5025 info->flag_buf, framesize);
5026 }
5027 }
5028 /* Free the buffers used by this frame. */
5029 rx_free_frame_buffers( info, StartIndex, EndIndex );
5030
5031 ReturnCode = 1;
5032
5033Cleanup:
5034 if ( info->rx_enabled && info->rx_overflow ) {
5035 /* Receiver is enabled, but needs to restarted due to
5036 * rx buffer overflow. If buffers are empty, restart receiver.
5037 */
5038 if (info->rx_buf_list[EndIndex].status == 0xff) {
5039 spin_lock_irqsave(&info->lock,flags);
5040 rx_start(info);
5041 spin_unlock_irqrestore(&info->lock,flags);
5042 }
5043 }
5044
5045 return ReturnCode;
5046}
5047
5048/* load the transmit DMA buffer with data
5049 */
5050void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5051{
5052 unsigned short copy_count;
5053 unsigned int i = 0;
5054 SCADESC *desc;
5055 SCADESC_EX *desc_ex;
5056
5057 if ( debug_level >= DEBUG_LEVEL_DATA )
5058 trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
5059
5060 /* Copy source buffer to one or more DMA buffers, starting with
5061 * the first transmit dma buffer.
5062 */
5063 for(i=0;;)
5064 {
5065 copy_count = min_t(unsigned short,count,SCABUFSIZE);
5066
5067 desc = &info->tx_buf_list[i];
5068 desc_ex = &info->tx_buf_list_ex[i];
5069
5070 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5071
5072 desc->length = copy_count;
5073 desc->status = 0;
5074
5075 buf += copy_count;
5076 count -= copy_count;
5077
5078 if (!count)
5079 break;
5080
5081 i++;
5082 if (i >= info->tx_buf_count)
5083 i = 0;
5084 }
5085
5086 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5087 info->last_tx_buf = ++i;
5088}
5089
5090int register_test(SLMP_INFO *info)
5091{
5092 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
Tobias Klauserfe971072006-01-09 20:54:02 -08005093 static unsigned int count = ARRAY_SIZE(testval);
Linus Torvalds1da177e2005-04-16 15:20:36 -07005094 unsigned int i;
5095 int rc = TRUE;
5096 unsigned long flags;
5097
5098 spin_lock_irqsave(&info->lock,flags);
5099 reset_port(info);
5100
5101 /* assume failure */
5102 info->init_error = DiagStatus_AddressFailure;
5103
5104 /* Write bit patterns to various registers but do it out of */
5105 /* sync, then read back and verify values. */
5106
5107 for (i = 0 ; i < count ; i++) {
5108 write_reg(info, TMC, testval[i]);
5109 write_reg(info, IDL, testval[(i+1)%count]);
5110 write_reg(info, SA0, testval[(i+2)%count]);
5111 write_reg(info, SA1, testval[(i+3)%count]);
5112
5113 if ( (read_reg(info, TMC) != testval[i]) ||
5114 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5115 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5116 (read_reg(info, SA1) != testval[(i+3)%count]) )
5117 {
5118 rc = FALSE;
5119 break;
5120 }
5121 }
5122
5123 reset_port(info);
5124 spin_unlock_irqrestore(&info->lock,flags);
5125
5126 return rc;
5127}
5128
5129int irq_test(SLMP_INFO *info)
5130{
5131 unsigned long timeout;
5132 unsigned long flags;
5133
5134 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5135
5136 spin_lock_irqsave(&info->lock,flags);
5137 reset_port(info);
5138
5139 /* assume failure */
5140 info->init_error = DiagStatus_IrqFailure;
5141 info->irq_occurred = FALSE;
5142
5143 /* setup timer0 on SCA0 to interrupt */
5144
5145 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5146 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5147
5148 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5149 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5150
5151
5152 /* TMCS, Timer Control/Status Register
5153 *
5154 * 07 CMF, Compare match flag (read only) 1=match
5155 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5156 * 05 Reserved, must be 0
5157 * 04 TME, Timer Enable
5158 * 03..00 Reserved, must be 0
5159 *
5160 * 0101 0000
5161 */
5162 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5163
5164 spin_unlock_irqrestore(&info->lock,flags);
5165
5166 timeout=100;
5167 while( timeout-- && !info->irq_occurred ) {
5168 msleep_interruptible(10);
5169 }
5170
5171 spin_lock_irqsave(&info->lock,flags);
5172 reset_port(info);
5173 spin_unlock_irqrestore(&info->lock,flags);
5174
5175 return info->irq_occurred;
5176}
5177
5178/* initialize individual SCA device (2 ports)
5179 */
5180static int sca_init(SLMP_INFO *info)
5181{
5182 /* set wait controller to single mem partition (low), no wait states */
5183 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5184 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5185 write_reg(info, WCRL, 0); /* wait controller low range */
5186 write_reg(info, WCRM, 0); /* wait controller mid range */
5187 write_reg(info, WCRH, 0); /* wait controller high range */
5188
5189 /* DPCR, DMA Priority Control
5190 *
5191 * 07..05 Not used, must be 0
5192 * 04 BRC, bus release condition: 0=all transfers complete
5193 * 03 CCC, channel change condition: 0=every cycle
5194 * 02..00 PR<2..0>, priority 100=round robin
5195 *
5196 * 00000100 = 0x04
5197 */
5198 write_reg(info, DPCR, dma_priority);
5199
5200 /* DMA Master Enable, BIT7: 1=enable all channels */
5201 write_reg(info, DMER, 0x80);
5202
5203 /* enable all interrupt classes */
5204 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5205 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5206 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5207
5208 /* ITCR, interrupt control register
5209 * 07 IPC, interrupt priority, 0=MSCI->DMA
5210 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5211 * 04 VOS, Vector Output, 0=unmodified vector
5212 * 03..00 Reserved, must be 0
5213 */
5214 write_reg(info, ITCR, 0);
5215
5216 return TRUE;
5217}
5218
5219/* initialize adapter hardware
5220 */
5221int init_adapter(SLMP_INFO *info)
5222{
5223 int i;
5224
5225 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5226 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5227 u32 readval;
5228
5229 info->misc_ctrl_value |= BIT30;
5230 *MiscCtrl = info->misc_ctrl_value;
5231
5232 /*
5233 * Force at least 170ns delay before clearing
5234 * reset bit. Each read from LCR takes at least
5235 * 30ns so 10 times for 300ns to be safe.
5236 */
5237 for(i=0;i<10;i++)
5238 readval = *MiscCtrl;
5239
5240 info->misc_ctrl_value &= ~BIT30;
5241 *MiscCtrl = info->misc_ctrl_value;
5242
5243 /* init control reg (all DTRs off, all clksel=input) */
5244 info->ctrlreg_value = 0xaa;
5245 write_control_reg(info);
5246
5247 {
5248 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5249 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5250
5251 switch(read_ahead_count)
5252 {
5253 case 16:
5254 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5255 break;
5256 case 8:
5257 lcr1_brdr_value |= BIT5 + BIT4;
5258 break;
5259 case 4:
5260 lcr1_brdr_value |= BIT5 + BIT3;
5261 break;
5262 case 0:
5263 lcr1_brdr_value |= BIT5;
5264 break;
5265 }
5266
5267 *LCR1BRDR = lcr1_brdr_value;
5268 *MiscCtrl = misc_ctrl_value;
5269 }
5270
5271 sca_init(info->port_array[0]);
5272 sca_init(info->port_array[2]);
5273
5274 return TRUE;
5275}
5276
5277/* Loopback an HDLC frame to test the hardware
5278 * interrupt and DMA functions.
5279 */
5280int loopback_test(SLMP_INFO *info)
5281{
5282#define TESTFRAMESIZE 20
5283
5284 unsigned long timeout;
5285 u16 count = TESTFRAMESIZE;
5286 unsigned char buf[TESTFRAMESIZE];
5287 int rc = FALSE;
5288 unsigned long flags;
5289
5290 struct tty_struct *oldtty = info->tty;
5291 u32 speed = info->params.clock_speed;
5292
5293 info->params.clock_speed = 3686400;
5294 info->tty = NULL;
5295
5296 /* assume failure */
5297 info->init_error = DiagStatus_DmaFailure;
5298
5299 /* build and send transmit frame */
5300 for (count = 0; count < TESTFRAMESIZE;++count)
5301 buf[count] = (unsigned char)count;
5302
5303 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5304
5305 /* program hardware for HDLC and enabled receiver */
5306 spin_lock_irqsave(&info->lock,flags);
5307 hdlc_mode(info);
5308 enable_loopback(info,1);
5309 rx_start(info);
5310 info->tx_count = count;
5311 tx_load_dma_buffer(info,buf,count);
5312 tx_start(info);
5313 spin_unlock_irqrestore(&info->lock,flags);
5314
5315 /* wait for receive complete */
5316 /* Set a timeout for waiting for interrupt. */
5317 for ( timeout = 100; timeout; --timeout ) {
5318 msleep_interruptible(10);
5319
5320 if (rx_get_frame(info)) {
5321 rc = TRUE;
5322 break;
5323 }
5324 }
5325
5326 /* verify received frame length and contents */
5327 if (rc == TRUE &&
5328 ( info->tmp_rx_buf_count != count ||
5329 memcmp(buf, info->tmp_rx_buf,count))) {
5330 rc = FALSE;
5331 }
5332
5333 spin_lock_irqsave(&info->lock,flags);
5334 reset_adapter(info);
5335 spin_unlock_irqrestore(&info->lock,flags);
5336
5337 info->params.clock_speed = speed;
5338 info->tty = oldtty;
5339
5340 return rc;
5341}
5342
5343/* Perform diagnostics on hardware
5344 */
5345int adapter_test( SLMP_INFO *info )
5346{
5347 unsigned long flags;
5348 if ( debug_level >= DEBUG_LEVEL_INFO )
5349 printk( "%s(%d):Testing device %s\n",
5350 __FILE__,__LINE__,info->device_name );
5351
5352 spin_lock_irqsave(&info->lock,flags);
5353 init_adapter(info);
5354 spin_unlock_irqrestore(&info->lock,flags);
5355
5356 info->port_array[0]->port_count = 0;
5357
5358 if ( register_test(info->port_array[0]) &&
5359 register_test(info->port_array[1])) {
5360
5361 info->port_array[0]->port_count = 2;
5362
5363 if ( register_test(info->port_array[2]) &&
5364 register_test(info->port_array[3]) )
5365 info->port_array[0]->port_count += 2;
5366 }
5367 else {
5368 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5369 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5370 return -ENODEV;
5371 }
5372
5373 if ( !irq_test(info->port_array[0]) ||
5374 !irq_test(info->port_array[1]) ||
5375 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5376 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5377 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5378 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5379 return -ENODEV;
5380 }
5381
5382 if (!loopback_test(info->port_array[0]) ||
5383 !loopback_test(info->port_array[1]) ||
5384 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5385 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5386 printk( "%s(%d):DMA test failure for device %s\n",
5387 __FILE__,__LINE__,info->device_name);
5388 return -ENODEV;
5389 }
5390
5391 if ( debug_level >= DEBUG_LEVEL_INFO )
5392 printk( "%s(%d):device %s passed diagnostics\n",
5393 __FILE__,__LINE__,info->device_name );
5394
5395 info->port_array[0]->init_error = 0;
5396 info->port_array[1]->init_error = 0;
5397 if ( info->port_count > 2 ) {
5398 info->port_array[2]->init_error = 0;
5399 info->port_array[3]->init_error = 0;
5400 }
5401
5402 return 0;
5403}
5404
5405/* Test the shared memory on a PCI adapter.
5406 */
5407int memory_test(SLMP_INFO *info)
5408{
5409 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5410 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
Tobias Klauserfe971072006-01-09 20:54:02 -08005411 unsigned long count = ARRAY_SIZE(testval);
Linus Torvalds1da177e2005-04-16 15:20:36 -07005412 unsigned long i;
5413 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5414 unsigned long * addr = (unsigned long *)info->memory_base;
5415
5416 /* Test data lines with test pattern at one location. */
5417
5418 for ( i = 0 ; i < count ; i++ ) {
5419 *addr = testval[i];
5420 if ( *addr != testval[i] )
5421 return FALSE;
5422 }
5423
5424 /* Test address lines with incrementing pattern over */
5425 /* entire address range. */
5426
5427 for ( i = 0 ; i < limit ; i++ ) {
5428 *addr = i * 4;
5429 addr++;
5430 }
5431
5432 addr = (unsigned long *)info->memory_base;
5433
5434 for ( i = 0 ; i < limit ; i++ ) {
5435 if ( *addr != i * 4 )
5436 return FALSE;
5437 addr++;
5438 }
5439
5440 memset( info->memory_base, 0, SCA_MEM_SIZE );
5441 return TRUE;
5442}
5443
5444/* Load data into PCI adapter shared memory.
5445 *
5446 * The PCI9050 releases control of the local bus
5447 * after completing the current read or write operation.
5448 *
5449 * While the PCI9050 write FIFO not empty, the
5450 * PCI9050 treats all of the writes as a single transaction
5451 * and does not release the bus. This causes DMA latency problems
5452 * at high speeds when copying large data blocks to the shared memory.
5453 *
5454 * This function breaks a write into multiple transations by
5455 * interleaving a read which flushes the write FIFO and 'completes'
5456 * the write transation. This allows any pending DMA request to gain control
5457 * of the local bus in a timely fasion.
5458 */
5459void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5460{
5461 /* A load interval of 16 allows for 4 32-bit writes at */
5462 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5463
5464 unsigned short interval = count / sca_pci_load_interval;
5465 unsigned short i;
5466
5467 for ( i = 0 ; i < interval ; i++ )
5468 {
5469 memcpy(dest, src, sca_pci_load_interval);
5470 read_status_reg(info);
5471 dest += sca_pci_load_interval;
5472 src += sca_pci_load_interval;
5473 }
5474
5475 memcpy(dest, src, count % sca_pci_load_interval);
5476}
5477
5478void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5479{
5480 int i;
5481 int linecount;
5482 if (xmit)
5483 printk("%s tx data:\n",info->device_name);
5484 else
5485 printk("%s rx data:\n",info->device_name);
5486
5487 while(count) {
5488 if (count > 16)
5489 linecount = 16;
5490 else
5491 linecount = count;
5492
5493 for(i=0;i<linecount;i++)
5494 printk("%02X ",(unsigned char)data[i]);
5495 for(;i<17;i++)
5496 printk(" ");
5497 for(i=0;i<linecount;i++) {
5498 if (data[i]>=040 && data[i]<=0176)
5499 printk("%c",data[i]);
5500 else
5501 printk(".");
5502 }
5503 printk("\n");
5504
5505 data += linecount;
5506 count -= linecount;
5507 }
5508} /* end of trace_block() */
5509
5510/* called when HDLC frame times out
5511 * update stats and do tx completion processing
5512 */
5513void tx_timeout(unsigned long context)
5514{
5515 SLMP_INFO *info = (SLMP_INFO*)context;
5516 unsigned long flags;
5517
5518 if ( debug_level >= DEBUG_LEVEL_INFO )
5519 printk( "%s(%d):%s tx_timeout()\n",
5520 __FILE__,__LINE__,info->device_name);
5521 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5522 info->icount.txtimeout++;
5523 }
5524 spin_lock_irqsave(&info->lock,flags);
5525 info->tx_active = 0;
5526 info->tx_count = info->tx_put = info->tx_get = 0;
5527
5528 spin_unlock_irqrestore(&info->lock,flags);
5529
5530#ifdef CONFIG_HDLC
5531 if (info->netcount)
5532 hdlcdev_tx_done(info);
5533 else
5534#endif
5535 bh_transmit(info);
5536}
5537
5538/* called to periodically check the DSR/RI modem signal input status
5539 */
5540void status_timeout(unsigned long context)
5541{
5542 u16 status = 0;
5543 SLMP_INFO *info = (SLMP_INFO*)context;
5544 unsigned long flags;
5545 unsigned char delta;
5546
5547
5548 spin_lock_irqsave(&info->lock,flags);
5549 get_signals(info);
5550 spin_unlock_irqrestore(&info->lock,flags);
5551
5552 /* check for DSR/RI state change */
5553
5554 delta = info->old_signals ^ info->serial_signals;
5555 info->old_signals = info->serial_signals;
5556
5557 if (delta & SerialSignal_DSR)
5558 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5559
5560 if (delta & SerialSignal_RI)
5561 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5562
5563 if (delta & SerialSignal_DCD)
5564 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5565
5566 if (delta & SerialSignal_CTS)
5567 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5568
5569 if (status)
5570 isr_io_pin(info,status);
5571
5572 info->status_timer.data = (unsigned long)info;
5573 info->status_timer.function = status_timeout;
5574 info->status_timer.expires = jiffies + msecs_to_jiffies(10);
5575 add_timer(&info->status_timer);
5576}
5577
5578
5579/* Register Access Routines -
5580 * All registers are memory mapped
5581 */
5582#define CALC_REGADDR() \
5583 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5584 if (info->port_num > 1) \
5585 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5586 if ( info->port_num & 1) { \
5587 if (Addr > 0x7f) \
5588 RegAddr += 0x40; /* DMA access */ \
5589 else if (Addr > 0x1f && Addr < 0x60) \
5590 RegAddr += 0x20; /* MSCI access */ \
5591 }
5592
5593
5594unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5595{
5596 CALC_REGADDR();
5597 return *RegAddr;
5598}
5599void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5600{
5601 CALC_REGADDR();
5602 *RegAddr = Value;
5603}
5604
5605u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5606{
5607 CALC_REGADDR();
5608 return *((u16 *)RegAddr);
5609}
5610
5611void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5612{
5613 CALC_REGADDR();
5614 *((u16 *)RegAddr) = Value;
5615}
5616
5617unsigned char read_status_reg(SLMP_INFO * info)
5618{
5619 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5620 return *RegAddr;
5621}
5622
5623void write_control_reg(SLMP_INFO * info)
5624{
5625 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5626 *RegAddr = info->port_array[0]->ctrlreg_value;
5627}
5628
5629
5630static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5631 const struct pci_device_id *ent)
5632{
5633 if (pci_enable_device(dev)) {
5634 printk("error enabling pci device %p\n", dev);
5635 return -EIO;
5636 }
5637 device_init( ++synclinkmp_adapter_count, dev );
5638 return 0;
5639}
5640
5641static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5642{
5643}