blob: 5a6895320b48a8d7774acfb4e6b239713cc6bd9d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Network device configuration
3#
4
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07005menuconfig NETDEVICES
Paolo 'Blaisorblade' Giarrussoce2d2ae2006-01-18 17:42:59 -08006 default y if UML
Jan Engelhardte0009822007-07-21 19:11:35 -07007 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 bool "Network device support"
9 ---help---
10 You can say N here if you don't intend to connect your Linux box to
11 any other computer at all.
12
13 You'll have to say Y if your computer contains a network card that
14 you want to use under Linux. If you are going to run SLIP or PPP over
15 telephone line or null modem cable you need say Y here. Connecting
16 two machines with parallel ports using PLIP needs this, as well as
17 AX.25/KISS for sending Internet traffic over amateur radio links.
18
19 See also "The Linux Network Administrator's Guide" by Olaf Kirch and
20 Terry Dawson. Available at <http://www.tldp.org/guides.html>.
21
22 If unsure, say Y.
23
Randy Dunlap1618cb02006-09-25 23:11:21 -070024# All the following symbols are dependent on NETDEVICES - do not repeat
25# that for each of the symbols.
26if NETDEVICES
Randy Dunlapcbcd2a42005-07-27 13:04:35 -070027
Jamal Hadi Salim253af422006-01-08 22:34:25 -080028config IFB
29 tristate "Intermediate Functional Block support"
30 depends on NET_CLS_ACT
31 ---help---
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +010032 This is an intermediate driver that allows sharing of
Jamal Hadi Salim253af422006-01-08 22:34:25 -080033 resources.
34 To compile this driver as a module, choose M here: the module
35 will be called ifb. If you want to use more than one ifb
36 device at a time, you need to compile this driver as a module.
37 Instead of 'ifb', the devices will then be called 'ifb0',
38 'ifb1' etc.
39 Look at the iproute2 documentation directory for usage etc
40
Linus Torvalds1da177e2005-04-16 15:20:36 -070041config DUMMY
42 tristate "Dummy net driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 ---help---
44 This is essentially a bit-bucket device (i.e. traffic you send to
45 this device is consigned into oblivion) with a configurable IP
46 address. It is most commonly used in order to make your currently
47 inactive SLIP address seem like a real address for local programs.
48 If you use SLIP or PPP, you might want to say Y here. Since this
49 thing often comes in handy, the default is Y. It won't enlarge your
50 kernel either. What a deal. Read about it in the Network
51 Administrator's Guide, available from
52 <http://www.tldp.org/docs.html#guide>.
53
54 To compile this driver as a module, choose M here: the module
55 will be called dummy. If you want to use more than one dummy
56 device at a time, you need to compile this driver as a module.
57 Instead of 'dummy', the devices will then be called 'dummy0',
58 'dummy1' etc.
59
60config BONDING
61 tristate "Bonding driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 depends on INET
Brian Haley305d5522008-11-04 17:51:14 -080063 depends on IPV6 || IPV6=n
Linus Torvalds1da177e2005-04-16 15:20:36 -070064 ---help---
65 Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
66 Channels together. This is called 'Etherchannel' by Cisco,
67 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
68
69 The driver supports multiple bonding modes to allow for both high
Jon Mason47c51432006-02-12 11:53:04 -060070 performance and high availability operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070071
72 Refer to <file:Documentation/networking/bonding.txt> for more
73 information.
74
75 To compile this driver as a module, choose M here: the module
76 will be called bonding.
77
Patrick McHardyb863ceb2007-07-14 18:55:06 -070078config MACVLAN
79 tristate "MAC-VLAN support (EXPERIMENTAL)"
80 depends on EXPERIMENTAL
81 ---help---
82 This allows one to create virtual interfaces that map packets to
83 or from specific MAC addresses to a particular interface.
84
Patrick McHardy3dbf8d52008-02-26 17:52:05 -080085 Macvlan devices can be added using the "ip" command from the
86 iproute2 package starting with the iproute2-2.6.23 release:
87
88 "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
89
Patrick McHardyb863ceb2007-07-14 18:55:06 -070090 To compile this driver as a module, choose M here: the module
91 will be called macvlan.
92
Arnd Bergmann20d29d72010-01-30 12:24:26 +000093config MACVTAP
94 tristate "MAC-VLAN based tap driver (EXPERIMENTAL)"
95 depends on MACVLAN
96 help
97 This adds a specialized tap character device driver that is based
98 on the MAC-VLAN network interface, called macvtap. A macvtap device
99 can be added in the same way as a macvlan device, using 'type
100 macvlan', and then be accessed through the tap user space interface.
101
102 To compile this driver as a module, choose M here: the module
103 will be called macvtap.
104
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105config EQUALIZER
106 tristate "EQL (serial line load balancing) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 ---help---
108 If you have two serial connections to some other computer (this
109 usually requires two modems and two telephone lines) and you use
110 SLIP (the protocol for sending Internet traffic over telephone
111 lines) or PPP (a better SLIP) on them, you can make them behave like
112 one double speed connection using this driver. Naturally, this has
113 to be supported at the other end as well, either with a similar EQL
114 Linux driver or with a Livingston Portmaster 2e.
115
116 Say Y if you want this and read
117 <file:Documentation/networking/eql.txt>. You may also want to read
118 section 6.2 of the NET-3-HOWTO, available from
119 <http://www.tldp.org/docs.html#howto>.
120
121 To compile this driver as a module, choose M here: the module
122 will be called eql. If unsure, say N.
123
124config TUN
125 tristate "Universal TUN/TAP device driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126 select CRC32
127 ---help---
128 TUN/TAP provides packet reception and transmission for user space
129 programs. It can be viewed as a simple Point-to-Point or Ethernet
130 device, which instead of receiving packets from a physical media,
131 receives them from user space program and instead of sending packets
132 via physical media writes them to the user space program.
133
134 When a program opens /dev/net/tun, driver creates and registers
135 corresponding net device tunX or tapX. After a program closed above
136 devices, driver will automatically delete tunXX or tapXX device and
137 all routes corresponding to it.
138
139 Please read <file:Documentation/networking/tuntap.txt> for more
140 information.
141
142 To compile this driver as a module, choose M here: the module
143 will be called tun.
144
145 If you don't know what to use this for, you don't need it.
146
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700147config VETH
Rusty Russell6a9a0252007-11-06 20:35:55 -0800148 tristate "Virtual ethernet pair device"
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700149 ---help---
Rusty Russell6a9a0252007-11-06 20:35:55 -0800150 This device is a local ethernet tunnel. Devices are created in pairs.
151 When one end receives the packet it appears on its pair and vice
152 versa.
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154config NET_SB1000
155 tristate "General Instruments Surfboard 1000"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -0700156 depends on PNP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 ---help---
158 This is a driver for the General Instrument (also known as
159 NextLevel) SURFboard 1000 internal
160 cable modem. This is an ISA card which is used by a number of cable
161 TV companies to provide cable modem access. It's a one-way
162 downstream-only cable modem, meaning that your upstream net link is
163 provided by your regular phone modem.
164
165 At present this driver only compiles as a module, so say M here if
166 you have this card. The module will be called sb1000. Then read
167 <file:Documentation/networking/README.sb1000> for information on how
168 to use this module, as it needs special ppp scripts for establishing
169 a connection. Further documentation and the necessary scripts can be
170 found at:
171
172 <http://www.jacksonville.net/~fventuri/>
173 <http://home.adelphia.net/~siglercm/sb1000.html>
174 <http://linuxpower.cx/~cable/>
175
176 If you don't have this card, of course say N.
177
Adrian Bunkf65fd8f2006-01-05 22:45:41 -0800178source "drivers/net/arcnet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179
Andy Fleming00db8182005-07-30 19:31:23 -0400180source "drivers/net/phy/Kconfig"
181
Linus Torvalds1da177e2005-04-16 15:20:36 -0700182#
183# Ethernet
184#
185
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700186menuconfig NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187 bool "Ethernet (10 or 100Mbit)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700188 depends on !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189 ---help---
190 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
191 type of Local Area Network (LAN) in universities and companies.
192
193 Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
194 coaxial cable, linking computers in a chain), 10BASE-T or twisted
195 pair (10 Mbps over twisted pair cable, linking computers to central
196 hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
197 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
198 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
199 cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
200 [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
201 Ethernet (1 Gbps over optical fiber or short copper links).
202
203 If your Linux machine will be connected to an Ethernet and you have
204 an Ethernet network interface card (NIC) installed in your computer,
205 say Y here and read the Ethernet-HOWTO, available from
206 <http://www.tldp.org/docs.html#howto>. You will then also have
207 to say Y to the driver for your particular NIC.
208
209 Note that the answer to this question won't directly affect the
210 kernel: saying N will just cause the configurator to skip all
211 the questions about Ethernet network cards. If unsure, say N.
212
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700213if NET_ETHERNET
214
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215config MII
216 tristate "Generic Media Independent Interface device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217 help
218 Most ethernet controllers have MII transceiver either as an external
219 or internal device. It is safe to say Y or M here even if your
220 ethernet card lack MII.
221
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100222config MACB
223 tristate "Atmel MACB support"
Nicolas Ferre789b23b2009-06-26 15:36:58 +0100224 depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
frederic RODO6c36a702007-07-12 19:07:24 +0200225 select PHYLIB
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100226 help
227 The Atmel MACB ethernet interface is found on many AT32 and AT91
228 parts. Say Y to include support for the MACB chip.
229
230 To compile this driver as a module, choose M here: the module
231 will be called macb.
232
Linus Torvalds1da177e2005-04-16 15:20:36 -0700233source "drivers/net/arm/Kconfig"
234
Ben Dooks825a2ff2007-07-03 16:53:09 +0100235config AX88796
236 tristate "ASIX AX88796 NE2000 clone support"
Magnus Damm86879912007-11-08 16:31:05 +0900237 depends on ARM || MIPS || SUPERH
Ben Dooks825a2ff2007-07-03 16:53:09 +0100238 select CRC32
239 select MII
240 help
241 AX88796 driver, using platform bus to provide
242 chip detection and resources
243
Magnus Damm89e536a2007-09-28 22:42:16 -0700244config AX88796_93CX6
245 bool "ASIX AX88796 external 93CX6 eeprom support"
246 depends on AX88796
247 select EEPROM_93CX6
248 help
249 Select this if your platform comes with an external 93CX6 eeprom.
250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251config MACE
252 tristate "MACE (Power Mac ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700253 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 select CRC32
255 help
256 Power Macintoshes and clones with Ethernet built-in on the
257 motherboard will usually use a MACE (Medium Access Control for
258 Ethernet) interface. Say Y to include support for the MACE chip.
259
260 To compile this driver as a module, choose M here: the module
261 will be called mace.
262
263config MACE_AAUI_PORT
264 bool "Use AAUI port instead of TP by default"
265 depends on MACE
266 help
267 Some Apple machines (notably the Apple Network Server) which use the
268 MACE ethernet chip have an Apple AUI port (small 15-pin connector),
269 instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
270 Y here if you have such a machine. If unsure, say N.
271 The driver will default to AAUI on ANS anyway, and if you use it as
272 a module, you can provide the port_aaui=0|1 to force the driver.
273
274config BMAC
275 tristate "BMAC (G3 ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700276 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277 select CRC32
278 help
279 Say Y for support of BMAC Ethernet interfaces. These are used on G3
280 computers.
281
282 To compile this driver as a module, choose M here: the module
283 will be called bmac.
284
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285config ARIADNE
286 tristate "Ariadne support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700287 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288 help
289 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
290 Otherwise, say N.
291
292 To compile this driver as a module, choose M here: the module
293 will be called ariadne.
294
295config A2065
296 tristate "A2065 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700297 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 select CRC32
299 help
300 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
301 say N.
302
303 To compile this driver as a module, choose M here: the module
304 will be called a2065.
305
306config HYDRA
307 tristate "Hydra support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700308 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309 select CRC32
310 help
311 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
312
313 To compile this driver as a module, choose M here: the module
314 will be called hydra.
315
316config ZORRO8390
317 tristate "Zorro NS8390-based Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700318 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 select CRC32
320 help
321 This driver is for Zorro Ethernet cards using an NS8390-compatible
322 chipset, like the Village Tronic Ariadne II and the Individual
323 Computers X-Surf Ethernet cards. If you have such a card, say Y.
324 Otherwise, say N.
325
326 To compile this driver as a module, choose M here: the module
327 will be called zorro8390.
328
329config APNE
330 tristate "PCMCIA NE2000 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700331 depends on AMIGA_PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700332 select CRC32
333 help
334 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
335 say N.
336
337 To compile this driver as a module, choose M here: the module
338 will be called apne.
339
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340config MAC8390
341 bool "Macintosh NS 8390 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700342 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700343 select CRC32
344 help
345 If you want to include a driver to support Nubus or LC-PDS
346 Ethernet cards using an NS8390 chipset or its equivalent, say Y
347 and read the Ethernet-HOWTO, available from
348 <http://www.tldp.org/docs.html#howto>.
349
350config MAC89x0
351 tristate "Macintosh CS89x0 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700352 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353 ---help---
354 Support for CS89x0 chipset based Ethernet cards. If you have a
355 Nubus or LC-PDS network (Ethernet) card of this type, say Y and
356 read the Ethernet-HOWTO, available from
357 <http://www.tldp.org/docs.html#howto>.
358
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800359 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360 be called mac89x0.
361
362config MACSONIC
363 tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700364 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 ---help---
366 Support for NatSemi SONIC based Ethernet devices. This includes
367 the onboard Ethernet in many Quadras as well as some LC-PDS,
368 a few Nubus and all known Comm Slot Ethernet cards. If you have
369 one of these say Y and read the Ethernet-HOWTO, available from
370 <http://www.tldp.org/docs.html#howto>.
371
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800372 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 be called macsonic.
374
375config MACMACE
Finn Thain8b6aaab2007-05-01 22:33:01 +0200376 bool "Macintosh (AV) onboard MACE ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700377 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378 select CRC32
379 help
380 Support for the onboard AMD 79C940 MACE Ethernet controller used in
381 the 660AV and 840AV Macintosh. If you have one of these Macintoshes
382 say Y and read the Ethernet-HOWTO, available from
383 <http://www.tldp.org/docs.html#howto>.
384
385config MVME147_NET
386 tristate "MVME147 (Lance) Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700387 depends on MVME147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 select CRC32
389 help
390 Support for the on-board Ethernet interface on the Motorola MVME147
391 single-board computer. Say Y here to include the
392 driver for this chip in your kernel.
393 To compile this driver as a module, choose M here.
394
395config MVME16x_NET
396 tristate "MVME16x Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700397 depends on MVME16x
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 help
399 This is the driver for the Ethernet interface on the Motorola
400 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
401 driver for this chip in your kernel.
402 To compile this driver as a module, choose M here.
403
404config BVME6000_NET
405 tristate "BVME6000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700406 depends on BVME6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407 help
408 This is the driver for the Ethernet interface on BVME4000 and
409 BVME6000 VME boards. Say Y here to include the driver for this chip
410 in your kernel.
411 To compile this driver as a module, choose M here.
412
413config ATARILANCE
414 tristate "Atari Lance support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700415 depends on ATARI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 help
417 Say Y to include support for several Atari Ethernet adapters based
418 on the AMD Lance chipset: RieblCard (with or without battery), or
419 PAMCard VME (also the version by Rhotron, with different addresses).
420
Linus Torvalds1da177e2005-04-16 15:20:36 -0700421config SUN3LANCE
422 tristate "Sun3/Sun3x on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700423 depends on SUN3 || SUN3X
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 help
425 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
426 featured an AMD Lance 10Mbit Ethernet controller on board; say Y
427 here to compile in the Linux driver for this and enable Ethernet.
428 General Linux information on the Sun 3 and 3x series (now
429 discontinued) is at
430 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
431
432 If you're not building a kernel for a Sun 3, say N.
433
434config SUN3_82586
Al Viro9a482202005-08-25 06:24:56 +0100435 bool "Sun3 on-board Intel 82586 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700436 depends on SUN3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 help
438 This driver enables support for the on-board Intel 82586 based
439 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
440 that this driver does not support 82586-based adapters on additional
441 VME boards.
442
443config HPLANCE
444 bool "HP on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700445 depends on DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446 select CRC32
447 help
448 If you want to use the builtin "LANCE" Ethernet controller on an
449 HP300 machine, say Y here.
450
451config LASI_82596
452 tristate "Lasi ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700453 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 help
Matthew Wilcox6de187e2006-11-18 10:05:16 -0700455 Say Y here to support the builtin Intel 82596 ethernet controller
456 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457
Thomas Bogendoerferf2ec8032007-06-28 00:49:06 +0200458config SNI_82596
459 tristate "SNI RM ethernet"
460 depends on NET_ETHERNET && SNI_RM
461 help
462 Say Y here to support the on-board Intel 82596 ethernet controller
463 built into SNI RM machines.
464
Florian Fainellief112912008-03-19 17:14:51 +0100465config KORINA
466 tristate "Korina (IDT RC32434) Ethernet support"
Ralf Baechlef57b2062008-04-28 12:48:40 +0100467 depends on NET_ETHERNET && MIKROTIK_RB532
Florian Fainellief112912008-03-19 17:14:51 +0100468 help
469 If you have a Mikrotik RouterBoard 500 or IDT RC32434
470 based system say Y. Otherwise say N.
471
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472config MIPS_JAZZ_SONIC
473 tristate "MIPS JAZZ onboard SONIC Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700474 depends on MACH_JAZZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475 help
476 This is the driver for the onboard card of MIPS Magnum 4000,
477 Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
478
Chris Zankel74f2a5f02008-05-05 23:36:35 -0700479config XTENSA_XT2000_SONIC
480 tristate "Xtensa XT2000 onboard SONIC Ethernet support"
481 depends on XTENSA_PLATFORM_XT2000
482 help
483 This is the driver for the onboard card of the Xtensa XT2000 board.
484
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485config MIPS_AU1X00_ENET
Florian Fainellib233fc62010-04-06 22:08:53 +0000486 tristate "MIPS AU1000 Ethernet support"
Manuel Lauss42a4f172010-07-15 21:45:04 +0200487 depends on MIPS_ALCHEMY
Herbert Valerio Riedel0638dec2006-06-01 09:41:04 +0200488 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489 select CRC32
490 help
491 If you have an Alchemy Semi AU1X00 based system
492 say Y. Otherwise, say N.
493
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494config SGI_IOC3_ETH
495 bool "SGI IOC3 Ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700496 depends on PCI && SGI_IP27
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497 select CRC32
498 select MII
499 help
500 If you have a network (Ethernet) card of this type, say Y and read
501 the Ethernet-HOWTO, available from
502 <http://www.tldp.org/docs.html#howto>.
503
Ralf Baechledcbf8472005-10-10 14:51:27 +0100504config MIPS_SIM_NET
Ralf Baechle1e2b9802007-03-18 23:21:22 +0000505 tristate "MIPS simulator Network device"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700506 depends on MIPS_SIM
Ralf Baechledcbf8472005-10-10 14:51:27 +0100507 help
508 The MIPSNET device is a simple Ethernet network device which is
509 emulated by the MIPS Simulator.
510 If you are not using a MIPSsim or are unsure, say N.
511
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512config SGI_O2MACE_ETH
513 tristate "SGI O2 MACE Fast Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700514 depends on SGI_IP32=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700515
516config STNIC
517 tristate "National DP83902AV support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700518 depends on SUPERH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519 select CRC32
520 help
521 Support for cards based on the National Semiconductor DP83902AV
522 ST-NIC Serial Network Interface Controller for Twisted Pair. This
523 is a 10Mbit/sec Ethernet controller. Product overview and specs at
524 <http://www.national.com/pf/DP/DP83902A.html>.
525
526 If unsure, say N.
527
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700528config SH_ETH
529 tristate "Renesas SuperH Ethernet support"
530 depends on SUPERH && \
Yoshihiro Shimoda65ac8852009-05-24 23:54:30 +0000531 (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
532 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
Yoshihiro Shimodaf29a3d02010-07-05 18:32:50 +0000533 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700534 select CRC32
535 select MII
536 select MDIO_BITBANG
537 select PHYLIB
538 help
539 Renesas SuperH Ethernet device driver.
Yoshihiro Shimodaf29a3d02010-07-05 18:32:50 +0000540 This driver supporting CPUs are:
541 - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700542
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543config SUNLANCE
544 tristate "Sun LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700545 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546 select CRC32
547 help
548 This driver supports the "le" interface present on all 32-bit Sparc
549 systems, on some older Ultra systems and as an Sbus option. These
550 cards are based on the AMD Lance chipset, which is better known
551 via the NE2100 cards.
552
553 To compile this driver as a module, choose M here: the module
554 will be called sunlance.
555
556config HAPPYMEAL
557 tristate "Sun Happy Meal 10/100baseT support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700558 depends on SBUS || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 select CRC32
560 help
561 This driver supports the "hme" interface present on most Ultra
562 systems and as an option on older Sbus systems. This driver supports
563 both PCI and Sbus devices. This driver also supports the "qfe" quad
564 100baseT device available in both PCI and Sbus configurations.
565
566 To compile this driver as a module, choose M here: the module
567 will be called sunhme.
568
569config SUNBMAC
570 tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700571 depends on SBUS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 select CRC32
573 help
574 This driver supports the "be" interface available as an Sbus option.
575 This is Sun's older 100baseT Ethernet device.
576
577 To compile this driver as a module, choose M here: the module
578 will be called sunbmac.
579
580config SUNQE
581 tristate "Sun QuadEthernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700582 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700583 select CRC32
584 help
585 This driver supports the "qe" 10baseT Ethernet device, available as
586 an Sbus option. Note that this is not the same as Quad FastEthernet
587 "qfe" which is supported by the Happy Meal driver instead.
588
589 To compile this driver as a module, choose M here: the module
590 will be called sunqe.
591
592config SUNGEM
593 tristate "Sun GEM support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700594 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595 select CRC32
596 help
597 Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
598 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
599
David S. Miller1f26dac2005-09-27 15:24:13 -0700600config CASSINI
601 tristate "Sun Cassini support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700602 depends on PCI
David S. Miller1f26dac2005-09-27 15:24:13 -0700603 select CRC32
604 help
605 Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
606 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
607
David S. Miller4c521e42007-07-09 22:23:51 -0700608config SUNVNET
609 tristate "Sun Virtual Network support"
610 depends on SUN_LDOMS
611 help
612 Support for virtual network devices under Sun Logical Domains.
613
Linus Torvalds1da177e2005-04-16 15:20:36 -0700614config NET_VENDOR_3COM
615 bool "3COM cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700616 depends on ISA || EISA || MCA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700617 help
618 If you have a network (Ethernet) card belonging to this class, say Y
619 and read the Ethernet-HOWTO, available from
620 <http://www.tldp.org/docs.html#howto>.
621
622 Note that the answer to this question doesn't directly affect the
623 kernel: saying N will just cause the configurator to skip all
624 the questions about 3COM cards. If you say Y, you will be asked for
625 your specific card in the following questions.
626
627config EL1
628 tristate "3c501 \"EtherLink\" support"
629 depends on NET_VENDOR_3COM && ISA
630 ---help---
631 If you have a network (Ethernet) card of this type, say Y and read
632 the Ethernet-HOWTO, available from
633 <http://www.tldp.org/docs.html#howto>. Also, consider buying a
634 new card, since the 3c501 is slow, broken, and obsolete: you will
635 have problems. Some people suggest to ping ("man ping") a nearby
636 machine every minute ("man cron") when using this card.
637
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800638 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 will be called 3c501.
640
641config EL2
642 tristate "3c503 \"EtherLink II\" support"
643 depends on NET_VENDOR_3COM && ISA
644 select CRC32
645 help
646 If you have a network (Ethernet) card of this type, say Y and read
647 the Ethernet-HOWTO, available from
648 <http://www.tldp.org/docs.html#howto>.
649
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800650 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700651 will be called 3c503.
652
653config ELPLUS
654 tristate "3c505 \"EtherLink Plus\" support"
Al Viroa5532602005-05-04 05:39:42 +0100655 depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656 ---help---
657 Information about this network (Ethernet) card can be found in
658 <file:Documentation/networking/3c505.txt>. If you have a card of
659 this type, say Y and read the Ethernet-HOWTO, available from
660 <http://www.tldp.org/docs.html#howto>.
661
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800662 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700663 will be called 3c505.
664
665config EL16
666 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
667 depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
668 help
669 If you have a network (Ethernet) card of this type, say Y and read
670 the Ethernet-HOWTO, available from
671 <http://www.tldp.org/docs.html#howto>.
672
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800673 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700674 will be called 3c507.
675
676config EL3
677 tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
678 depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
679 ---help---
680 If you have a network (Ethernet) card belonging to the 3Com
681 EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
682 from <http://www.tldp.org/docs.html#howto>.
683
684 If your card is not working you may need to use the DOS
685 setup disk to disable Plug & Play mode, and to select the default
686 media type.
687
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800688 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689 will be called 3c509.
690
691config 3C515
692 tristate "3c515 ISA \"Fast EtherLink\""
Al Viroa5532602005-05-04 05:39:42 +0100693 depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694 help
695 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
696 network card, say Y and read the Ethernet-HOWTO, available from
697 <http://www.tldp.org/docs.html#howto>.
698
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800699 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700700 will be called 3c515.
701
702config ELMC
703 tristate "3c523 \"EtherLink/MC\" support"
704 depends on NET_VENDOR_3COM && MCA_LEGACY
705 help
706 If you have a network (Ethernet) card of this type, say Y and read
707 the Ethernet-HOWTO, available from
708 <http://www.tldp.org/docs.html#howto>.
709
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800710 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700711 will be called 3c523.
712
713config ELMC_II
714 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
715 depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
716 help
717 If you have a network (Ethernet) card of this type, say Y and read
718 the Ethernet-HOWTO, available from
719 <http://www.tldp.org/docs.html#howto>.
720
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800721 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700722 will be called 3c527.
723
724config VORTEX
725 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
726 depends on NET_VENDOR_3COM && (PCI || EISA)
727 select MII
728 ---help---
Jon Mason47c51432006-02-12 11:53:04 -0600729 This option enables driver support for a large number of 10Mbps and
730 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731
732 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
733 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
734 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
735 "Tornado" (3c905) PCI
736 "Hurricane" (3c555/3cSOHO) PCI
737
738 If you have such a card, say Y and read the Ethernet-HOWTO,
739 available from <http://www.tldp.org/docs.html#howto>. More
740 specific information is in
741 <file:Documentation/networking/vortex.txt> and in the comments at
742 the beginning of <file:drivers/net/3c59x.c>.
743
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800744 To compile this support as a module, choose M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745
746config TYPHOON
747 tristate "3cr990 series \"Typhoon\" support"
748 depends on NET_VENDOR_3COM && PCI
749 select CRC32
750 ---help---
751 This option enables driver support for the 3cr990 series of cards:
752
753 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
754 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
755 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
756
757 If you have a network (Ethernet) card of this type, say Y and read
758 the Ethernet-HOWTO, available from
759 <http://www.tldp.org/docs.html#howto>.
760
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800761 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700762 will be called typhoon.
763
764config LANCE
765 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700766 depends on ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700767 help
768 If you have a network (Ethernet) card of this type, say Y and read
769 the Ethernet-HOWTO, available from
770 <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
771 of this type.
772
773 To compile this driver as a module, choose M here: the module
774 will be called lance. This is recommended.
775
776config NET_VENDOR_SMC
777 bool "Western Digital/SMC cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700778 depends on ISA || MCA || EISA || MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700779 help
780 If you have a network (Ethernet) card belonging to this class, say Y
781 and read the Ethernet-HOWTO, available from
782 <http://www.tldp.org/docs.html#howto>.
783
784 Note that the answer to this question doesn't directly affect the
785 kernel: saying N will just cause the configurator to skip all
786 the questions about Western Digital cards. If you say Y, you will be
787 asked for your specific card in the following questions.
788
789config WD80x3
790 tristate "WD80*3 support"
791 depends on NET_VENDOR_SMC && ISA
792 select CRC32
793 help
794 If you have a network (Ethernet) card of this type, say Y and read
795 the Ethernet-HOWTO, available from
796 <http://www.tldp.org/docs.html#howto>.
797
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800798 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 will be called wd.
800
801config ULTRAMCA
802 tristate "SMC Ultra MCA support"
803 depends on NET_VENDOR_SMC && MCA
804 select CRC32
805 help
806 If you have a network (Ethernet) card of this type and are running
807 an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
808 available from <http://www.tldp.org/docs.html#howto>.
809
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800810 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700811 will be called smc-mca.
812
813config ULTRA
814 tristate "SMC Ultra support"
815 depends on NET_VENDOR_SMC && ISA
816 select CRC32
817 ---help---
818 If you have a network (Ethernet) card of this type, say Y and read
819 the Ethernet-HOWTO, available from
820 <http://www.tldp.org/docs.html#howto>.
821
822 Important: There have been many reports that, with some motherboards
823 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
824 such as some BusLogic models) causes corruption problems with many
825 operating systems. The Linux smc-ultra driver has a work-around for
826 this but keep it in mind if you have such a SCSI card and have
827 problems.
828
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800829 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700830 will be called smc-ultra.
831
832config ULTRA32
833 tristate "SMC Ultra32 EISA support"
834 depends on NET_VENDOR_SMC && EISA
835 select CRC32
836 help
837 If you have a network (Ethernet) card of this type, say Y and read
838 the Ethernet-HOWTO, available from
839 <http://www.tldp.org/docs.html#howto>.
840
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800841 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 will be called smc-ultra32.
843
Bryan Wue190d6b2007-07-17 14:43:44 +0800844config BFIN_MAC
Mike Frysinger736783b2008-08-27 11:47:57 +0800845 tristate "Blackfin on-chip MAC support"
Sonic Zhang33a2a2b2009-01-08 10:52:26 -0800846 depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800847 select CRC32
Bryan Wueeb70af2007-09-19 23:37:41 +0800848 select MII
849 select PHYLIB
Bryan Wue190d6b2007-07-17 14:43:44 +0800850 select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
851 help
Mike Frysinger736783b2008-08-27 11:47:57 +0800852 This is the driver for Blackfin on-chip mac device. Say Y if you want it
Bryan Wue190d6b2007-07-17 14:43:44 +0800853 compiled into the kernel. This driver is also available as a module
854 ( = code which can be inserted in and removed from the running kernel
855 whenever you want). The module will be called bfin_mac.
856
857config BFIN_MAC_USE_L1
858 bool "Use L1 memory for rx/tx packets"
Michael Hennerich6893ff12008-01-30 16:52:25 +0800859 depends on BFIN_MAC && (BF527 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800860 default y
861 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200862 To get maximum network performance, you should use L1 memory as rx/tx buffers.
Bryan Wue190d6b2007-07-17 14:43:44 +0800863 Say N here if you want to reserve L1 memory for other uses.
864
865config BFIN_TX_DESC_NUM
866 int "Number of transmit buffer packets"
867 depends on BFIN_MAC
868 range 6 10 if BFIN_MAC_USE_L1
869 range 10 100
870 default "10"
871 help
872 Set the number of buffer packets used in driver.
873
874config BFIN_RX_DESC_NUM
875 int "Number of receive buffer packets"
876 depends on BFIN_MAC
877 range 20 100 if BFIN_MAC_USE_L1
878 range 20 800
879 default "20"
880 help
881 Set the number of buffer packets used in driver.
882
883config BFIN_MAC_RMII
Mike Frysingere06d41d2010-02-15 14:32:50 +0000884 bool "RMII PHY Interface"
885 depends on BFIN_MAC
Michael Hennerich6893ff12008-01-30 16:52:25 +0800886 default y if BFIN527_EZKIT
887 default n if BFIN537_STAMP
Bryan Wue190d6b2007-07-17 14:43:44 +0800888 help
889 Use Reduced PHY MII Interface
890
Barry Songfe92afe2010-05-17 17:19:40 -0700891config BFIN_MAC_USE_HWSTAMP
892 bool "Use IEEE 1588 hwstamp"
893 depends on BFIN_MAC && BF518
894 default y
895 help
896 To support the IEEE 1588 Precision Time Protocol (PTP), select y here
897
Linus Torvalds1da177e2005-04-16 15:20:36 -0700898config SMC9194
899 tristate "SMC 9194 support"
900 depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
901 select CRC32
902 ---help---
903 This is support for the SMC9xxx based Ethernet cards. Choose this
904 option if you have a DELL laptop with the docking station, or
905 another SMC9192/9194 based chipset. Say Y if you want it compiled
906 into the kernel, and read the file
907 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
908 available from <http://www.tldp.org/docs.html#howto>.
909
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800910 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911 will be called smc9194.
912
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700913config SMC91X
914 tristate "SMC 91C9x/91C1xxx support"
915 select CRC32
916 select MII
Christian Dietrichc76986c2010-07-16 02:29:02 +0000917 depends on ARM || M32R || SUPERH || \
Greg Ungerer717ea4b2010-03-10 07:37:06 -0800918 MIPS || BLACKFIN || MN10300 || COLDFIRE
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700919 help
920 This is a driver for SMC's 91x series of Ethernet chipsets,
921 including the SMC91C94 and the SMC91C111. Say Y if you want it
922 compiled into the kernel, and read the file
923 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
924 available from <http://www.linuxdoc.org/docs.html#howto>.
925
926 This driver is also available as a module ( = code which can be
927 inserted in and removed from the running kernel whenever you want).
928 The module will be called smc91x. If you want to compile it as a
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800929 module, say M here and read <file:Documentation/kbuild/modules.txt>.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700930
Sascha Hauer92aa6742006-06-22 07:11:13 +0200931config NET_NETX
932 tristate "NetX Ethernet support"
933 select MII
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700934 depends on ARCH_NETX
Sascha Hauer92aa6742006-06-22 07:11:13 +0200935 help
936 This is support for the Hilscher netX builtin Ethernet ports
937
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800938 To compile this driver as a module, choose M here. The module
Sascha Hauer92aa6742006-06-22 07:11:13 +0200939 will be called netx-eth.
940
Anant Golea6286ee2009-05-18 15:19:01 -0700941config TI_DAVINCI_EMAC
942 tristate "TI DaVinci EMAC Support"
Sriramakrishnan8ee2bf92009-11-19 15:58:25 +0530943 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
Anant Golea6286ee2009-05-18 15:19:01 -0700944 select PHYLIB
945 help
946 This driver supports TI's DaVinci Ethernet .
947
948 To compile this driver as a module, choose M here: the module
949 will be called davinci_emac_driver. This is recommended.
950
Sascha Hauera1365272005-05-05 15:14:15 -0700951config DM9000
952 tristate "DM9000 support"
Alex Landauf40d24d2007-07-12 12:11:48 +0800953 depends on ARM || BLACKFIN || MIPS
Sascha Hauera1365272005-05-05 15:14:15 -0700954 select CRC32
955 select MII
956 ---help---
957 Support for DM9000 chipset.
958
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800959 To compile this driver as a module, choose M here. The module
960 will be called dm9000.
Sascha Hauera1365272005-05-05 15:14:15 -0700961
Ben Dooks485ca222008-06-24 22:16:06 +0100962config DM9000_DEBUGLEVEL
963 int "DM9000 maximum debug level"
964 depends on DM9000
965 default 4
966 help
967 The maximum level of debugging code compiled into the DM9000
968 driver.
969
Ben Dooksf8dd0ec2008-06-24 22:16:04 +0100970config DM9000_FORCE_SIMPLE_PHY_POLL
971 bool "Force simple NSR based PHY polling"
972 depends on DM9000
973 ---help---
974 This configuration forces the DM9000 to use the NSR's LinkStatus
975 bit to determine if the link is up or down instead of the more
976 costly MII PHY reads. Note, this will not work if the chip is
977 operating with an external PHY.
978
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100979config ENC28J60
980 tristate "ENC28J60 support"
981 depends on EXPERIMENTAL && SPI && NET_ETHERNET
982 select CRC32
983 ---help---
984 Support for the Microchip EN28J60 ethernet chip.
985
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -0800986 To compile this driver as a module, choose M here. The module will be
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100987 called enc28j60.
988
989config ENC28J60_WRITEVERIFY
990 bool "Enable write verify"
991 depends on ENC28J60
992 ---help---
993 Enable the verify after the buffer write useful for debugging purpose.
994 If unsure, say N.
995
Thierry Redinga1702852009-03-27 00:12:24 -0700996config ETHOC
997 tristate "OpenCores 10/100 Mbps Ethernet MAC support"
Geert Uytterhoeven0ebe74e2009-11-20 09:19:10 +0000998 depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
Thierry Redinga1702852009-03-27 00:12:24 -0700999 select MII
1000 select PHYLIB
Randy Dunlapc5cacb32009-04-08 15:41:25 -07001001 select CRC32
1002 select BITREVERSE
Thierry Redinga1702852009-03-27 00:12:24 -07001003 help
1004 Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
1005
Kristoffer Glembod4c41132010-02-15 03:33:44 +00001006config GRETH
1007 tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
David S. Millercf261b22010-02-18 23:32:26 -08001008 depends on SPARC
Kristoffer Glembod4c41132010-02-15 03:33:44 +00001009 select PHYLIB
1010 select CRC32
1011 help
1012 Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
1013
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001014config SMC911X
1015 tristate "SMSC LAN911[5678] support"
1016 select CRC32
1017 select MII
Catalin Marinasbd2c4972008-10-20 18:15:17 +01001018 depends on ARM || SUPERH
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001019 help
1020 This is a driver for SMSC's LAN911x series of Ethernet chipsets
1021 including the new LAN9115, LAN9116, LAN9117, and LAN9118.
1022 Say Y if you want it compiled into the kernel,
1023 and read the Ethernet-HOWTO, available from
1024 <http://www.linuxdoc.org/docs.html#howto>.
1025
1026 This driver is also available as a module. The module will be
1027 called smc911x. If you want to compile it as a module, say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001028 here and read <file:Documentation/kbuild/modules.txt>
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001029
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001030config SMSC911X
1031 tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
Manuel Laussb4efc562009-10-13 07:25:48 +00001032 depends on ARM || SUPERH || BLACKFIN || MIPS
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001033 select CRC32
1034 select MII
1035 select PHYLIB
1036 ---help---
1037 Say Y here if you want support for SMSC LAN911x and LAN921x families
1038 of ethernet controllers.
1039
1040 To compile this driver as a module, choose M here and read
1041 <file:Documentation/networking/net-modules.txt>. The module
1042 will be called smsc911x.
1043
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044config NET_VENDOR_RACAL
1045 bool "Racal-Interlan (Micom) NI cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001046 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001047 help
1048 If you have a network (Ethernet) card belonging to this class, such
1049 as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
1050 available from <http://www.tldp.org/docs.html#howto>.
1051
1052 Note that the answer to this question doesn't directly affect the
1053 kernel: saying N will just cause the configurator to skip all
1054 the questions about NI cards. If you say Y, you will be asked for
1055 your specific card in the following questions.
1056
1057config NI5010
1058 tristate "NI5010 support (EXPERIMENTAL)"
1059 depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
1060 ---help---
1061 If you have a network (Ethernet) card of this type, say Y and read
1062 the Ethernet-HOWTO, available from
1063 <http://www.tldp.org/docs.html#howto>. Note that this is still
1064 experimental code.
1065
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001066 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 will be called ni5010.
1068
1069config NI52
1070 tristate "NI5210 support"
1071 depends on NET_VENDOR_RACAL && ISA
1072 help
1073 If you have a network (Ethernet) card of this type, say Y and read
1074 the Ethernet-HOWTO, available from
1075 <http://www.tldp.org/docs.html#howto>.
1076
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001077 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001078 will be called ni52.
1079
1080config NI65
1081 tristate "NI6510 support"
Al Viroa5532602005-05-04 05:39:42 +01001082 depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001083 help
1084 If you have a network (Ethernet) card of this type, say Y and read
1085 the Ethernet-HOWTO, available from
1086 <http://www.tldp.org/docs.html#howto>.
1087
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001088 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001089 will be called ni65.
1090
Ilya Yanok47964172009-03-11 23:26:02 -07001091config DNET
1092 tristate "Dave ethernet support (DNET)"
Ilya Yanok4b979262009-03-21 16:58:47 -07001093 depends on NET_ETHERNET && HAS_IOMEM
Ilya Yanok47964172009-03-11 23:26:02 -07001094 select PHYLIB
1095 help
1096 The Dave ethernet interface (DNET) is found on Qong Board FPGA.
1097 Say Y to include support for the DNET chip.
1098
1099 To compile this driver as a module, choose M here: the module
1100 will be called dnet.
1101
Linus Torvalds1da177e2005-04-16 15:20:36 -07001102source "drivers/net/tulip/Kconfig"
1103
1104config AT1700
1105 tristate "AT1700/1720 support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001106 depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001107 select CRC32
1108 ---help---
1109 If you have a network (Ethernet) card of this type, say Y and read
1110 the Ethernet-HOWTO, available from
1111 <http://www.tldp.org/docs.html#howto>.
1112
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001113 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001114 will be called at1700.
1115
1116config DEPCA
1117 tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001118 depends on ISA || EISA || MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001119 select CRC32
1120 ---help---
1121 If you have a network (Ethernet) card of this type, say Y and read
1122 the Ethernet-HOWTO, available from
1123 <http://www.tldp.org/docs.html#howto> as well as
1124 <file:drivers/net/depca.c>.
1125
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001126 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 will be called depca.
1128
1129config HP100
1130 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001131 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001132 help
1133 If you have a network (Ethernet) card of this type, say Y and read
1134 the Ethernet-HOWTO, available from
1135 <http://www.tldp.org/docs.html#howto>.
1136
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001137 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001138 will be called hp100.
1139
1140config NET_ISA
1141 bool "Other ISA cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001142 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143 ---help---
1144 If your network (Ethernet) card hasn't been mentioned yet and its
1145 bus system (that's the way the cards talks to the other components
1146 of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
1147 Make sure you know the name of your card. Read the Ethernet-HOWTO,
1148 available from <http://www.tldp.org/docs.html#howto>.
1149
1150 If unsure, say Y.
1151
1152 Note that the answer to this question doesn't directly affect the
1153 kernel: saying N will just cause the configurator to skip all
1154 the remaining ISA network card questions. If you say Y, you will be
1155 asked for your specific card in the following questions.
1156
1157config E2100
1158 tristate "Cabletron E21xx support"
1159 depends on NET_ISA
1160 select CRC32
1161 help
1162 If you have a network (Ethernet) card of this type, say Y and read
1163 the Ethernet-HOWTO, available from
1164 <http://www.tldp.org/docs.html#howto>.
1165
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001166 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167 will be called e2100.
1168
1169config EWRK3
1170 tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
1171 depends on NET_ISA
1172 select CRC32
1173 ---help---
1174 This driver supports the DE203, DE204 and DE205 network (Ethernet)
1175 cards. If this is for you, say Y and read
1176 <file:Documentation/networking/ewrk3.txt> in the kernel source as
1177 well as the Ethernet-HOWTO, available from
1178 <http://www.tldp.org/docs.html#howto>.
1179
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001180 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181 will be called ewrk3.
1182
1183config EEXPRESS
1184 tristate "EtherExpress 16 support"
1185 depends on NET_ISA
1186 ---help---
1187 If you have an EtherExpress16 network (Ethernet) card, say Y and
1188 read the Ethernet-HOWTO, available from
1189 <http://www.tldp.org/docs.html#howto>. Note that the Intel
1190 EtherExpress16 card used to be regarded as a very poor choice
1191 because the driver was very unreliable. We now have a new driver
1192 that should do better.
1193
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001194 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001195 will be called eexpress.
1196
1197config EEXPRESS_PRO
1198 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
1199 depends on NET_ISA
1200 ---help---
1201 If you have a network (Ethernet) card of this type, say Y. This
Jon Mason47c51432006-02-12 11:53:04 -06001202 driver supports Intel i82595{FX,TX} based boards. Note however
Linus Torvalds1da177e2005-04-16 15:20:36 -07001203 that the EtherExpress PRO/100 Ethernet card has its own separate
1204 driver. Please read the Ethernet-HOWTO, available from
1205 <http://www.tldp.org/docs.html#howto>.
1206
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001207 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001208 will be called eepro.
1209
Linus Torvalds1da177e2005-04-16 15:20:36 -07001210config HPLAN_PLUS
1211 tristate "HP PCLAN+ (27247B and 27252A) support"
1212 depends on NET_ISA
1213 select CRC32
1214 help
1215 If you have a network (Ethernet) card of this type, say Y and read
1216 the Ethernet-HOWTO, available from
1217 <http://www.tldp.org/docs.html#howto>.
1218
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001219 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001220 will be called hp-plus.
1221
1222config HPLAN
1223 tristate "HP PCLAN (27245 and other 27xxx series) support"
1224 depends on NET_ISA
1225 select CRC32
1226 help
1227 If you have a network (Ethernet) card of this type, say Y and read
1228 the Ethernet-HOWTO, available from
1229 <http://www.tldp.org/docs.html#howto>.
1230
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001231 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001232 will be called hp.
1233
1234config LP486E
1235 tristate "LP486E on board Ethernet"
1236 depends on NET_ISA
1237 help
1238 Say Y here to support the 82596-based on-board Ethernet controller
1239 for the Panther motherboard, which is one of the two shipped in the
1240 Intel Professional Workstation.
1241
1242config ETH16I
1243 tristate "ICL EtherTeam 16i/32 support"
1244 depends on NET_ISA
1245 help
1246 If you have a network (Ethernet) card of this type, say Y and read
1247 the Ethernet-HOWTO, available from
1248 <http://www.tldp.org/docs.html#howto>.
1249
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001250 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251 will be called eth16i.
1252
1253config NE2000
1254 tristate "NE2000/NE1000 support"
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +09001255 depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
Linus Torvalds1da177e2005-04-16 15:20:36 -07001256 select CRC32
1257 ---help---
1258 If you have a network (Ethernet) card of this type, say Y and read
1259 the Ethernet-HOWTO, available from
1260 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
1261 without a specific driver are compatible with NE2000.
1262
1263 If you have a PCI NE2000 card however, say N here and Y to "PCI
Jesper Juhl28beaf62006-03-08 00:06:31 -08001264 NE2000 and clone support" under "EISA, VLB, PCI and on board
1265 controllers" below. If you have a NE2000 card and are running on
Linus Torvalds1da177e2005-04-16 15:20:36 -07001266 an MCA system (a bus system used on some IBM PS/2 computers and
1267 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
1268 below.
1269
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001270 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001271 will be called ne.
1272
1273config ZNET
1274 tristate "Zenith Z-Note support (EXPERIMENTAL)"
Al Viroa5532602005-05-04 05:39:42 +01001275 depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001276 help
1277 The Zenith Z-Note notebook computer has a built-in network
1278 (Ethernet) card, and this is the Linux driver for it. Note that the
1279 IBM Thinkpad 300 is compatible with the Z-Note and is also supported
1280 by this driver. Read the Ethernet-HOWTO, available from
1281 <http://www.tldp.org/docs.html#howto>.
1282
1283config SEEQ8005
1284 tristate "SEEQ8005 support (EXPERIMENTAL)"
1285 depends on NET_ISA && EXPERIMENTAL
1286 help
1287 This is a driver for the SEEQ 8005 network (Ethernet) card. If this
1288 is for you, read the Ethernet-HOWTO, available from
1289 <http://www.tldp.org/docs.html#howto>.
1290
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001291 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001292 will be called seeq8005.
1293
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294config NE2_MCA
1295 tristate "NE/2 (ne2000 MCA version) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001296 depends on MCA_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -07001297 select CRC32
1298 help
1299 If you have a network (Ethernet) card of this type, say Y and read
1300 the Ethernet-HOWTO, available from
1301 <http://www.tldp.org/docs.html#howto>.
1302
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001303 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001304 will be called ne2.
1305
1306config IBMLANA
1307 tristate "IBM LAN Adapter/A support"
Adrian Bunke6353f32008-01-30 22:02:35 +02001308 depends on MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001309 ---help---
1310 This is a Micro Channel Ethernet adapter. You need to set
1311 CONFIG_MCA to use this driver. It is both available as an in-kernel
1312 driver and as a module.
1313
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001314 To compile this driver as a module, choose M here. The only
Linus Torvalds1da177e2005-04-16 15:20:36 -07001315 currently supported card is the IBM LAN Adapter/A for Ethernet. It
1316 will both support 16K and 32K memory windows, however a 32K window
1317 gives a better security against packet losses. Usage of multiple
1318 boards with this driver should be possible, but has not been tested
1319 up to now due to lack of hardware.
1320
1321config IBMVETH
1322 tristate "IBM LAN Virtual Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001323 depends on PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001324 ---help---
1325 This driver supports virtual ethernet adapters on newer IBM iSeries
1326 and pSeries systems.
1327
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001328 To compile this driver as a module, choose M here. The module will
Linus Torvalds1da177e2005-04-16 15:20:36 -07001329 be called ibmveth.
1330
David Gibson1d3bb992007-08-23 13:56:01 +10001331source "drivers/net/ibm_newemac/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001332
1333config NET_PCI
1334 bool "EISA, VLB, PCI and on board controllers"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001335 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001336 help
1337 This is another class of network cards which attach directly to the
1338 bus. If you have one of those, say Y and read the Ethernet-HOWTO,
1339 available from <http://www.tldp.org/docs.html#howto>.
1340
1341 Note that the answer to this question doesn't directly affect the
1342 kernel: saying N will just cause the configurator to skip all
1343 the questions about this class of network cards. If you say Y, you
1344 will be asked for your specific card in the following questions. If
1345 you are unsure, say Y.
1346
1347config PCNET32
1348 tristate "AMD PCnet32 PCI support"
1349 depends on NET_PCI && PCI
1350 select CRC32
1351 select MII
1352 help
1353 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
1354 answer Y here and read the Ethernet-HOWTO, available from
1355 <http://www.tldp.org/docs.html#howto>.
1356
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001357 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001358 will be called pcnet32.
1359
1360config AMD8111_ETH
1361 tristate "AMD 8111 (new PCI lance) support"
1362 depends on NET_PCI && PCI
1363 select CRC32
1364 select MII
1365 help
1366 If you have an AMD 8111-based PCI lance ethernet card,
1367 answer Y here and read the Ethernet-HOWTO, available from
1368 <http://www.tldp.org/docs.html#howto>.
1369
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001370 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371 will be called amd8111e.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001372
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373config ADAPTEC_STARFIRE
1374 tristate "Adaptec Starfire/DuraLAN support"
1375 depends on NET_PCI && PCI
1376 select CRC32
1377 select MII
1378 help
1379 Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
1380 adapter. The DuraLAN chip is used on the 64 bit PCI boards from
1381 Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
1382 driver.
1383
1384 To compile this driver as a module, choose M here: the module
1385 will be called starfire. This is recommended.
1386
Linus Torvalds1da177e2005-04-16 15:20:36 -07001387config AC3200
1388 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
1389 depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
1390 select CRC32
1391 help
1392 If you have a network (Ethernet) card of this type, say Y and read
1393 the Ethernet-HOWTO, available from
1394 <http://www.tldp.org/docs.html#howto>.
1395
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001396 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397 will be called ac3200.
1398
Tristram Ha1eb1cc72010-02-08 11:38:28 +00001399config KSZ884X_PCI
1400 tristate "Micrel KSZ8841/2 PCI"
1401 depends on NET_PCI && PCI
1402 select MII
1403 select CRC32
1404 help
1405 This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
1406
1407 To compile this driver as a module, choose M here. The module
1408 will be called ksz884x.
1409
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410config APRICOT
1411 tristate "Apricot Xen-II on board Ethernet"
1412 depends on NET_PCI && ISA
1413 help
1414 If you have a network (Ethernet) controller of this type, say Y and
1415 read the Ethernet-HOWTO, available from
1416 <http://www.tldp.org/docs.html#howto>.
1417
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001418 To compile this driver as a module, choose M here. The module
1419 will be called apricot.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001420
1421config B44
Michael Buesch753f4922007-09-19 14:20:30 -07001422 tristate "Broadcom 440x/47xx ethernet support"
Al Viro46cb69c2008-05-21 06:32:11 +01001423 depends on SSB_POSSIBLE && HAS_DMA
Michael Buesch753f4922007-09-19 14:20:30 -07001424 select SSB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001425 select MII
1426 help
Michael Buesch753f4922007-09-19 14:20:30 -07001427 If you have a network (Ethernet) controller of this type, say Y
1428 or M and read the Ethernet-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429 <http://www.tldp.org/docs.html#howto>.
1430
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001431 To compile this driver as a module, choose M here. The module
1432 will be called b44.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433
Michael Buesch753f4922007-09-19 14:20:30 -07001434# Auto-select SSB PCI-HOST support, if possible
1435config B44_PCI_AUTOSELECT
1436 bool
1437 depends on B44 && SSB_PCIHOST_POSSIBLE
1438 select SSB_PCIHOST
1439 default y
1440
1441# Auto-select SSB PCICORE driver, if possible
1442config B44_PCICORE_AUTOSELECT
1443 bool
1444 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
1445 select SSB_DRIVER_PCICORE
1446 default y
1447
1448config B44_PCI
1449 bool
1450 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
1451 default y
1452
Linus Torvalds1da177e2005-04-16 15:20:36 -07001453config FORCEDETH
Adrian Bunk82770082006-03-08 00:06:30 -08001454 tristate "nForce Ethernet support"
1455 depends on NET_PCI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001456 help
1457 If you have a network (Ethernet) controller of this type, say Y and
1458 read the Ethernet-HOWTO, available from
1459 <http://www.tldp.org/docs.html#howto>.
1460
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001461 To compile this driver as a module, choose M here. The module
1462 will be called forcedeth.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001463
Linus Torvalds1da177e2005-04-16 15:20:36 -07001464config CS89x0
1465 tristate "CS89x0 support"
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001466 depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
Christoph Eggere6e4ec22010-07-19 04:37:11 +00001467 || ARCH_IXDP2X01 || MACH_MX31ADS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001468 ---help---
1469 Support for CS89x0 chipset based Ethernet cards. If you have a
1470 network (Ethernet) card of this type, say Y and read the
1471 Ethernet-HOWTO, available from
1472 <http://www.tldp.org/docs.html#howto> as well as
1473 <file:Documentation/networking/cs89x0.txt>.
1474
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001475 To compile this driver as a module, choose M here. The module
1476 will be called cs89x0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001477
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001478config CS89x0_NONISA_IRQ
1479 def_bool y
1480 depends on CS89x0 != n
Christoph Eggere6e4ec22010-07-19 04:37:11 +00001481 depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001482
Linus Torvalds1da177e2005-04-16 15:20:36 -07001483config TC35815
1484 tristate "TOSHIBA TC35815 Ethernet support"
Atsushi Nemotoeea221ce2007-03-03 23:54:59 +09001485 depends on NET_PCI && PCI && MIPS
Atsushi Nemotoc6686fe2008-04-12 00:47:46 +09001486 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487
Linus Torvalds1da177e2005-04-16 15:20:36 -07001488config E100
1489 tristate "Intel(R) PRO/100+ support"
1490 depends on NET_PCI && PCI
1491 select MII
1492 ---help---
1493 This driver supports Intel(R) PRO/100 family of adapters.
1494 To verify that your adapter is supported, find the board ID number
1495 on the adapter. Look for a label that has a barcode and a number
1496 in the format 123456-001 (six digits hyphen three digits).
1497
1498 Use the above information and the Adapter & Driver ID Guide at:
1499
1500 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1501
1502 to identify the adapter.
1503
1504 For the latest Intel PRO/100 network driver for Linux, see:
1505
1506 <http://appsr.intel.com/scripts-df/support_intel.asp>
1507
1508 More specific information on configuring the driver is in
1509 <file:Documentation/networking/e100.txt>.
1510
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001511 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512 will be called e100.
1513
1514config LNE390
1515 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
1516 depends on NET_PCI && EISA && EXPERIMENTAL
1517 select CRC32
1518 help
1519 If you have a network (Ethernet) card of this type, say Y and read
1520 the Ethernet-HOWTO, available from
1521 <http://www.tldp.org/docs.html#howto>.
1522
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001523 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524 will be called lne390.
1525
1526config FEALNX
1527 tristate "Myson MTD-8xx PCI Ethernet support"
1528 depends on NET_PCI && PCI
1529 select CRC32
1530 select MII
1531 help
1532 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
1533 cards. Specifications and data at
1534 <http://www.myson.com.hk/mtd/datasheet/>.
1535
1536config NATSEMI
1537 tristate "National Semiconductor DP8381x series PCI Ethernet support"
1538 depends on NET_PCI && PCI
1539 select CRC32
1540 help
1541 This driver is for the National Semiconductor DP83810 series,
1542 which is used in cards from PureData, NetGear, Linksys
1543 and others, including the 83815 chip.
1544 More specific information and updates are available from
1545 <http://www.scyld.com/network/natsemi.html>.
1546
1547config NE2K_PCI
1548 tristate "PCI NE2000 and clones support (see help)"
1549 depends on NET_PCI && PCI
1550 select CRC32
1551 ---help---
1552 This driver is for NE2000 compatible PCI cards. It will not work
1553 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
1554 support" below). If you have a PCI NE2000 network (Ethernet) card,
1555 say Y and read the Ethernet-HOWTO, available from
1556 <http://www.tldp.org/docs.html#howto>.
1557
1558 This driver also works for the following NE2000 clone cards:
1559 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
1560 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
1561 Holtek HT80232 Holtek HT80229
1562
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001563 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001564 will be called ne2k-pci.
1565
1566config NE3210
1567 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
1568 depends on NET_PCI && EISA && EXPERIMENTAL
1569 select CRC32
1570 ---help---
1571 If you have a network (Ethernet) card of this type, say Y and read
1572 the Ethernet-HOWTO, available from
1573 <http://www.tldp.org/docs.html#howto>. Note that this driver
1574 will NOT WORK for NE3200 cards as they are completely different.
1575
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001576 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001577 will be called ne3210.
1578
1579config ES3210
1580 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
1581 depends on NET_PCI && EISA && EXPERIMENTAL
1582 select CRC32
1583 help
1584 If you have a network (Ethernet) card of this type, say Y and read
1585 the Ethernet-HOWTO, available from
1586 <http://www.tldp.org/docs.html#howto>.
1587
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001588 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001589 will be called es3210.
1590
1591config 8139CP
1592 tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
1593 depends on NET_PCI && PCI && EXPERIMENTAL
1594 select CRC32
1595 select MII
1596 help
1597 This is a driver for the Fast Ethernet PCI network cards based on
1598 the RTL8139C+ chips. If you have one of those, say Y and read
1599 the Ethernet-HOWTO, available from
1600 <http://www.tldp.org/docs.html#howto>.
1601
1602 To compile this driver as a module, choose M here: the module
1603 will be called 8139cp. This is recommended.
1604
1605config 8139TOO
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001606 tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001607 depends on NET_PCI && PCI
1608 select CRC32
1609 select MII
1610 ---help---
1611 This is a driver for the Fast Ethernet PCI network cards based on
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001612 the RTL 8129/8130/8139 chips. If you have one of those, say Y and
1613 read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001614
1615 To compile this driver as a module, choose M here: the module
1616 will be called 8139too. This is recommended.
1617
1618config 8139TOO_PIO
1619 bool "Use PIO instead of MMIO"
1620 default y
1621 depends on 8139TOO
1622 help
1623 This instructs the driver to use programmed I/O ports (PIO) instead
1624 of PCI shared memory (MMIO). This can possibly solve some problems
1625 in case your mainboard has memory consistency issues. If unsure,
1626 say N.
1627
1628config 8139TOO_TUNE_TWISTER
1629 bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
1630 depends on 8139TOO
1631 help
1632 This implements a function which might come in handy in case you
1633 are using low quality on long cabling. It is required for RealTek
1634 RTL-8139 revision K boards, and totally unused otherwise. It tries
1635 to match the transceiver to the cable characteristics. This is
1636 experimental since hardly documented by the manufacturer.
1637 If unsure, say Y.
1638
1639config 8139TOO_8129
1640 bool "Support for older RTL-8129/8130 boards"
1641 depends on 8139TOO
1642 help
1643 This enables support for the older and uncommon RTL-8129 and
1644 RTL-8130 chips, which support MII via an external transceiver,
1645 instead of an internal one. Disabling this option will save some
1646 memory by making the code size smaller. If unsure, say Y.
1647
1648config 8139_OLD_RX_RESET
1649 bool "Use older RX-reset method"
1650 depends on 8139TOO
1651 help
1652 The 8139too driver was recently updated to contain a more rapid
1653 reset sequence, in the face of severe receive errors. This "new"
1654 RX-reset method should be adequate for all boards. But if you
1655 experience problems, you can enable this option to restore the
1656 old RX-reset behavior. If unsure, say N.
1657
Sten Wang7a47dd72007-11-12 21:31:11 -08001658config R6040
Florian Fainelli68334112009-01-08 15:04:50 +00001659 tristate "RDC R6040 Fast Ethernet Adapter support"
Sten Wang7a47dd72007-11-12 21:31:11 -08001660 depends on NET_PCI && PCI
1661 select CRC32
1662 select MII
Florian Fainelli38318612010-05-31 09:18:57 +00001663 select PHYLIB
Sten Wang7a47dd72007-11-12 21:31:11 -08001664 help
1665 This is a driver for the R6040 Fast Ethernet MACs found in the
1666 the RDC R-321x System-on-chips.
1667
1668 To compile this driver as a module, choose M here: the module
1669 will be called r6040. This is recommended.
1670
Linus Torvalds1da177e2005-04-16 15:20:36 -07001671config SIS900
1672 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
1673 depends on NET_PCI && PCI
1674 select CRC32
Adrian Bunk6da0f682005-04-30 13:52:49 +02001675 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07001676 ---help---
1677 This is a driver for the Fast Ethernet PCI network cards based on
1678 the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
Adrian Bunkc3cf5602006-03-04 17:07:57 +01001679 SiS 630 and SiS 540 chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680
1681 This driver also supports AMD 79C901 HomePNA so that you can use
1682 your phone line as a network cable.
1683
1684 To compile this driver as a module, choose M here: the module
1685 will be called sis900. This is recommended.
1686
1687config EPIC100
1688 tristate "SMC EtherPower II"
1689 depends on NET_PCI && PCI
1690 select CRC32
1691 select MII
1692 help
1693 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
1694 which is based on the SMC83c17x (EPIC/100).
1695 More specific information and updates are available from
1696 <http://www.scyld.com/network/epic100.html>.
1697
Steve Glendinning2cb37722008-12-11 20:54:30 -08001698config SMSC9420
1699 tristate "SMSC LAN9420 PCI ethernet adapter support"
1700 depends on NET_PCI && PCI
1701 select CRC32
1702 select PHYLIB
1703 select SMSC_PHY
1704 help
1705 This is a driver for SMSC's LAN9420 PCI ethernet adapter.
1706 Say Y if you want it compiled into the kernel,
1707 and read the Ethernet-HOWTO, available from
1708 <http://www.linuxdoc.org/docs.html#howto>.
1709
1710 This driver is also available as a module. The module will be
1711 called smsc9420. If you want to compile it as a module, say M
1712 here and read <file:Documentation/kbuild/modules.txt>
1713
Linus Torvalds1da177e2005-04-16 15:20:36 -07001714config SUNDANCE
1715 tristate "Sundance Alta support"
1716 depends on NET_PCI && PCI
1717 select CRC32
1718 select MII
1719 help
1720 This driver is for the Sundance "Alta" chip.
1721 More specific information and updates are available from
1722 <http://www.scyld.com/network/sundance.html>.
1723
1724config SUNDANCE_MMIO
1725 bool "Use MMIO instead of PIO"
1726 depends on SUNDANCE
1727 help
1728 Enable memory-mapped I/O for interaction with Sundance NIC registers.
1729 Do NOT enable this by default, PIO (enabled when MMIO is disabled)
1730 is known to solve bugs on certain chips.
1731
1732 If unsure, say N.
1733
1734config TLAN
1735 tristate "TI ThunderLAN support"
Stephen Hemminger93e16842008-05-30 09:49:55 -07001736 depends on NET_PCI && (PCI || EISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001737 ---help---
1738 If you have a PCI Ethernet network card based on the ThunderLAN chip
1739 which is supported by this driver, say Y and read the
1740 Ethernet-HOWTO, available from
1741 <http://www.tldp.org/docs.html#howto>.
1742
1743 Devices currently supported by this driver are Compaq Netelligent,
1744 Compaq NetFlex and Olicom cards. Please read the file
1745 <file:Documentation/networking/tlan.txt> for more details.
1746
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001747 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001748 will be called tlan.
1749
1750 Please email feedback to <torben.mathiasen@compaq.com>.
1751
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001752config KS8842
David J. Choi28bd6202010-07-13 10:09:19 -07001753 tristate "Micrel KSZ8841/42 with generic bus interface"
Randy Dunlap19de1e32010-07-29 07:14:27 +00001754 depends on HAS_IOMEM && DMA_ENGINE
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001755 help
David J. Choi28bd6202010-07-13 10:09:19 -07001756 This platform driver is for KSZ8841(1-port) / KS8842(2-port)
1757 ethernet switch chip (managed, VLAN, QoS) from Micrel or
1758 Timberdale(FPGA).
Richard Ršöjforsb07878e2009-06-04 03:35:55 +00001759
Ben Dooks3ba81f32009-07-16 05:24:08 +00001760config KS8851
1761 tristate "Micrel KS8851 SPI"
1762 depends on SPI
Alexander Beregalovde72e5d2009-07-22 01:16:51 +00001763 select MII
Randy Dunlapcbb35f8a2009-08-19 12:13:31 -07001764 select CRC32
Ben Dooks3ba81f32009-07-16 05:24:08 +00001765 help
1766 SPI driver for Micrel KS8851 SPI attached network chip.
1767
Choi, Davida55c0a0e2009-09-25 14:42:12 +00001768config KS8851_MLL
1769 tristate "Micrel KS8851 MLL"
1770 depends on HAS_IOMEM
Randy Dunlap47a01a02009-10-14 15:10:58 -07001771 select MII
Choi, Davida55c0a0e2009-09-25 14:42:12 +00001772 help
1773 This platform driver is for Micrel KS8851 Address/data bus
1774 multiplexed network chip.
1775
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776config VIA_RHINE
1777 tristate "VIA Rhine support"
1778 depends on NET_PCI && PCI
1779 select CRC32
1780 select MII
1781 help
1782 If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
1783 Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
1784 Ethernet functions can also be found integrated on South Bridges
1785 (e.g. VT8235).
1786
1787 To compile this driver as a module, choose M here. The module
1788 will be called via-rhine.
1789
1790config VIA_RHINE_MMIO
1791 bool "Use MMIO instead of PIO"
1792 depends on VIA_RHINE
1793 help
1794 This instructs the driver to use PCI shared memory (MMIO) instead of
1795 programmed I/O ports (PIO). Enabling this gives an improvement in
1796 processing time in parts of the driver.
1797
1798 If unsure, say Y.
1799
Cesar Eduardo Barrosbf345702006-12-19 13:08:47 -08001800config SC92031
1801 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
1802 depends on NET_PCI && PCI && EXPERIMENTAL
1803 select CRC32
1804 ---help---
1805 This is a driver for the Fast Ethernet PCI network cards based on
1806 the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
1807 have one of these, say Y here.
1808
1809 To compile this driver as a module, choose M here: the module
1810 will be called sc92031. This is recommended.
1811
Matteo Croced95b39c2007-10-14 18:10:13 +02001812config CPMAC
1813 tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
Florian Fainelli839b04c2009-08-04 11:17:49 +00001814 depends on NET_ETHERNET && EXPERIMENTAL && AR7
Matteo Croced95b39c2007-10-14 18:10:13 +02001815 select PHYLIB
Matteo Croced95b39c2007-10-14 18:10:13 +02001816 help
1817 TI AR7 CPMAC Ethernet support
1818
Linus Torvalds1da177e2005-04-16 15:20:36 -07001819config NET_POCKET
1820 bool "Pocket and portable adapters"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001821 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001822 ---help---
1823 Cute little network (Ethernet) devices which attach to the parallel
1824 port ("pocket adapters"), commonly used with laptops. If you have
1825 one of those, say Y and read the Ethernet-HOWTO, available from
1826 <http://www.tldp.org/docs.html#howto>.
1827
1828 If you want to plug a network (or some other) card into the PCMCIA
1829 (or PC-card) slot of your laptop instead (PCMCIA is the standard for
1830 credit card size extension cards used by all modern laptops), you
1831 need the pcmcia-cs package (location contained in the file
1832 <file:Documentation/Changes>) and you can say N here.
1833
1834 Laptop users should read the Linux Laptop home page at
1835 <http://www.linux-on-laptops.com/> or
1836 Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
1837
1838 Note that the answer to this question doesn't directly affect the
1839 kernel: saying N will just cause the configurator to skip all
1840 the questions about this class of network devices. If you say Y, you
1841 will be asked for your specific device in the following questions.
1842
1843config ATP
1844 tristate "AT-LAN-TEC/RealTek pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001845 depends on NET_POCKET && PARPORT && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001846 select CRC32
1847 ---help---
1848 This is a network (Ethernet) device which attaches to your parallel
1849 port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
1850 available from <http://www.tldp.org/docs.html#howto>, if you
1851 want to use this. If you intend to use this driver, you should have
1852 said N to the "Parallel printer support", because the two drivers
1853 don't like each other.
1854
1855 To compile this driver as a module, choose M here: the module
1856 will be called atp.
1857
1858config DE600
1859 tristate "D-Link DE600 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001860 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001861 ---help---
1862 This is a network (Ethernet) device which attaches to your parallel
1863 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1864 Ethernet-HOWTO, available from
1865 <http://www.tldp.org/docs.html#howto>, if you want to use
1866 this. It is possible to have several devices share a single parallel
1867 port and it is safe to compile the corresponding drivers into the
1868 kernel.
1869
1870 To compile this driver as a module, choose M here: the module
1871 will be called de600.
1872
1873config DE620
1874 tristate "D-Link DE620 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001875 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001876 ---help---
1877 This is a network (Ethernet) device which attaches to your parallel
1878 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1879 Ethernet-HOWTO, available from
1880 <http://www.tldp.org/docs.html#howto>, if you want to use
1881 this. It is possible to have several devices share a single parallel
1882 port and it is safe to compile the corresponding drivers into the
1883 kernel.
1884
1885 To compile this driver as a module, choose M here: the module
1886 will be called de620.
1887
1888config SGISEEQ
1889 tristate "SGI Seeq ethernet controller support"
Thomas Bogendoerfer49b11bc2007-12-19 13:42:36 +01001890 depends on SGI_HAS_SEEQ
Linus Torvalds1da177e2005-04-16 15:20:36 -07001891 help
1892 Say Y here if you have an Seeq based Ethernet network card. This is
1893 used in many Silicon Graphics machines.
1894
1895config DECLANCE
1896 tristate "DEC LANCE ethernet controller support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001897 depends on MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001898 select CRC32
1899 help
1900 This driver is for the series of Ethernet controllers produced by
1901 DEC (now Compaq) based on the AMD Lance chipset, including the
1902 DEPCA series. (This chipset is better known via the NE2100 cards.)
1903
1904config 68360_ENET
1905 bool "Motorola 68360 ethernet controller"
1906 depends on M68360
1907 help
1908 Say Y here if you want to use the built-in ethernet controller of
1909 the Motorola 68360 processor.
1910
1911config FEC
Fabio Estevam64423302009-05-27 03:41:39 +00001912 bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
Amit Kucheriabd011e82010-02-05 08:56:22 +00001913 depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
1914 MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
Bryan Wue6b043d2010-03-31 02:10:44 +00001915 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001916 help
1917 Say Y here if you want to use the built-in 10/100 Fast ethernet
Sascha Hauer196719e2009-01-28 23:03:10 +00001918 controller on some Motorola ColdFire and Freescale i.MX processors.
Greg Ungerer2af69212005-09-12 11:18:10 +10001919
1920config FEC2
1921 bool "Second FEC ethernet controller (on some ColdFire CPUs)"
1922 depends on FEC
1923 help
1924 Say Y here if you want to use the second built-in 10/100 Fast
1925 ethernet controller on some Motorola ColdFire processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001926
Domen Puncer5d031e92007-10-26 18:07:49 +02001927config FEC_MPC52xx
1928 tristate "MPC52xx FEC driver"
Grant Likely847cdf42008-11-14 05:19:00 -07001929 depends on PPC_MPC52xx && PPC_BESTCOMM
Domen Puncer5d031e92007-10-26 18:07:49 +02001930 select CRC32
1931 select PHYLIB
Grant Likely847cdf42008-11-14 05:19:00 -07001932 select PPC_BESTCOMM_FEC
Domen Puncer5d031e92007-10-26 18:07:49 +02001933 ---help---
1934 This option enables support for the MPC5200's on-chip
1935 Fast Ethernet Controller
Pavel Machek4737f092009-06-05 00:44:53 +02001936 If compiled as module, it will be called fec_mpc52xx.
Domen Puncer5d031e92007-10-26 18:07:49 +02001937
1938config FEC_MPC52xx_MDIO
1939 bool "MPC52xx FEC MDIO bus driver"
1940 depends on FEC_MPC52xx
1941 default y
1942 ---help---
1943 The MPC5200's FEC can connect to the Ethernet either with
1944 an external MII PHY chip or 10 Mbps 7-wire interface
1945 (Motorola? industry standard).
1946 If your board uses an external PHY connected to FEC, enable this.
1947 If not sure, enable.
Pavel Machek4737f092009-06-05 00:44:53 +02001948 If compiled as module, it will be called fec_mpc52xx_phy.
Domen Puncer5d031e92007-10-26 18:07:49 +02001949
Linus Torvalds1da177e2005-04-16 15:20:36 -07001950config NE_H8300
1951 tristate "NE2000 compatible support for H8/300"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001952 depends on H8300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001953 help
1954 Say Y here if you want to use the NE2000 compatible
1955 controller on the Renesas H8/300 processor.
1956
Chris Snook452c1ce2008-09-14 19:56:10 -05001957config ATL2
1958 tristate "Atheros L2 Fast Ethernet support"
1959 depends on PCI
1960 select CRC32
1961 select MII
1962 help
1963 This driver supports the Atheros L2 fast ethernet adapter.
1964
1965 To compile this driver as a module, choose M here. The module
1966 will be called atl2.
1967
John Linnbb81b2d2009-08-20 02:52:16 -07001968config XILINX_EMACLITE
1969 tristate "Xilinx 10/100 Ethernet Lite support"
1970 depends on PPC32 || MICROBLAZE
John Linn5cdaaa12010-02-15 21:51:00 -08001971 select PHYLIB
John Linnbb81b2d2009-08-20 02:52:16 -07001972 help
1973 This driver supports the 10/100 Ethernet Lite from Xilinx.
1974
Maxime Bizon9b1fc552009-08-18 13:23:40 +01001975config BCM63XX_ENET
1976 tristate "Broadcom 63xx internal mac support"
1977 depends on BCM63XX
1978 select MII
1979 select PHYLIB
1980 help
1981 This driver supports the ethernet MACs in the Broadcom 63xx
1982 MIPS chipset family (BCM63XX).
1983
Pantelis Antoniou48257c42005-10-28 16:25:58 -04001984source "drivers/net/fs_enet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001985
David Daneyd6aa60a2009-10-14 12:04:41 -07001986source "drivers/net/octeon/Kconfig"
1987
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001988endif # NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -07001989
1990#
1991# Gigabit Ethernet
1992#
1993
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001994menuconfig NETDEV_1000
1995 bool "Ethernet (1000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07001996 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001997 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02001998 ---help---
1999 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
2000 type of Local Area Network (LAN) in universities and companies.
2001
2002 Say Y here to get to see options for Gigabit Ethernet drivers.
2003 This option alone does not add any kernel code.
2004 Note that drivers supporting both 100 and 1000 MBit may be listed
2005 under "Ethernet (10 or 100MBit)" instead.
2006
2007 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002008
2009if NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002010
2011config ACENIC
2012 tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
2013 depends on PCI
2014 ---help---
2015 Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
2016 GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
2017 adapter. The driver allows for using the Jumbo Frame option (9000
2018 bytes/frame) however it requires that your switches can handle this
2019 as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
2020 line.
2021
2022 To compile this driver as a module, choose M here: the
2023 module will be called acenic.
2024
2025config ACENIC_OMIT_TIGON_I
2026 bool "Omit support for old Tigon I based AceNICs"
2027 depends on ACENIC
2028 help
2029 Say Y here if you only have Tigon II based AceNICs and want to leave
2030 out support for the older Tigon I based cards which are no longer
2031 being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
2032 version)). This will reduce the size of the driver object by
2033 app. 100KB. If you are not sure whether your card is a Tigon I or a
2034 Tigon II, say N here.
2035
2036 The safe and default value for this is N.
2037
2038config DL2K
Komurodf950822007-08-13 09:45:41 +09002039 tristate "DL2000/TC902x-based Gigabit Ethernet support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002040 depends on PCI
2041 select CRC32
2042 help
Komurodf950822007-08-13 09:45:41 +09002043 This driver supports DL2000/TC902x-based Gigabit ethernet cards,
2044 which includes
Linus Torvalds1da177e2005-04-16 15:20:36 -07002045 D-Link DGE-550T Gigabit Ethernet Adapter.
2046 D-Link DL2000-based Gigabit Ethernet Adapter.
Komurodf950822007-08-13 09:45:41 +09002047 Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002048
2049 To compile this driver as a module, choose M here: the
2050 module will be called dl2k.
2051
2052config E1000
2053 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
2054 depends on PCI
2055 ---help---
2056 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
2057 adapters. For more information on how to identify your adapter, go
2058 to the Adapter & Driver ID Guide at:
2059
2060 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2061
2062 For general information and support, go to the Intel support
2063 website at:
2064
2065 <http://support.intel.com>
2066
2067 More specific information on configuring the driver is in
2068 <file:Documentation/networking/e1000.txt>.
2069
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002070 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002071 will be called e1000.
2072
Auke Kokbc7f75f2007-09-17 12:30:59 -07002073config E1000E
2074 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
Al Viro7ac86bf2008-04-27 06:15:42 +01002075 depends on PCI && (!SPARC32 || BROKEN)
Auke Kokbc7f75f2007-09-17 12:30:59 -07002076 ---help---
2077 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
2078 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
2079 use the regular e1000 driver For more information on how to
2080 identify your adapter, go to the Adapter & Driver ID Guide at:
2081
2082 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2083
2084 For general information and support, go to the Intel support
2085 website at:
2086
2087 <http://support.intel.com>
2088
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002089 To compile this driver as a module, choose M here. The module
Auke Kokbc7f75f2007-09-17 12:30:59 -07002090 will be called e1000e.
2091
Stephen Hemmingerab7a9832008-01-01 09:27:58 -08002092config IP1000
2093 tristate "IP1000 Gigabit Ethernet support"
2094 depends on PCI && EXPERIMENTAL
2095 select MII
2096 ---help---
2097 This driver supports IP1000 gigabit Ethernet cards.
2098
2099 To compile this driver as a module, choose M here: the module
2100 will be called ipg. This is recommended.
2101
Auke Kok9d5c8242008-01-24 02:22:38 -08002102config IGB
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002103 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
Auke Kok9d5c8242008-01-24 02:22:38 -08002104 depends on PCI
2105 ---help---
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002106 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
Auke Kok9d5c8242008-01-24 02:22:38 -08002107 adapters. For more information on how to identify your adapter, go
2108 to the Adapter & Driver ID Guide at:
2109
2110 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2111
2112 For general information and support, go to the Intel support
2113 website at:
2114
2115 <http://support.intel.com>
2116
2117 More specific information on configuring the driver is in
2118 <file:Documentation/networking/e1000.txt>.
2119
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -08002120 To compile this driver as a module, choose M here. The module
Auke Kok9d5c8242008-01-24 02:22:38 -08002121 will be called igb.
2122
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002123config IGB_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002124 bool "Direct Cache Access (DCA) Support"
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002125 default y
2126 depends on IGB && DCA && !(IGB=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002127 ---help---
2128 Say Y here if you want to use Direct Cache Access (DCA) in the
2129 driver. DCA is a method for warming the CPU cache before data
2130 is used, with the intent of lessening the impact of cache misses.
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002131
Alexander Duyckd4e0fe02009-04-07 14:37:34 +00002132config IGBVF
2133 tristate "Intel(R) 82576 Virtual Function Ethernet support"
2134 depends on PCI
2135 ---help---
2136 This driver supports Intel(R) 82576 virtual functions. For more
2137 information on how to identify your adapter, go to the Adapter &
2138 Driver ID Guide at:
2139
2140 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2141
2142 For general information and support, go to the Intel support
2143 website at:
2144
2145 <http://support.intel.com>
2146
2147 More specific information on configuring the driver is in
2148 <file:Documentation/networking/e1000.txt>.
2149
2150 To compile this driver as a module, choose M here. The module
2151 will be called igbvf.
2152
Lennert Buytenhek15d014d2005-11-11 18:23:13 +01002153source "drivers/net/ixp2000/Kconfig"
2154
Linus Torvalds1da177e2005-04-16 15:20:36 -07002155config MYRI_SBUS
2156 tristate "MyriCOM Gigabit Ethernet support"
2157 depends on SBUS
2158 help
2159 This driver supports MyriCOM Sbus gigabit Ethernet cards.
2160
2161 To compile this driver as a module, choose M here: the module
2162 will be called myri_sbus. This is recommended.
2163
2164config NS83820
Jon Mason47c51432006-02-12 11:53:04 -06002165 tristate "National Semiconductor DP83820 support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002166 depends on PCI
2167 help
2168 This is a driver for the National Semiconductor DP83820 series
2169 of gigabit ethernet MACs. Cards using this chipset include
2170 the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
2171 SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
2172 zero copy.
2173
2174config HAMACHI
2175 tristate "Packet Engines Hamachi GNIC-II support"
2176 depends on PCI
2177 select MII
2178 help
2179 If you have a Gigabit Ethernet card of this type, say Y and read
2180 the Ethernet-HOWTO, available from
2181 <http://www.tldp.org/docs.html#howto>.
2182
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002183 To compile this driver as a module, choose M here. The module will be
Linus Torvalds1da177e2005-04-16 15:20:36 -07002184 called hamachi.
2185
2186config YELLOWFIN
2187 tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
2188 depends on PCI && EXPERIMENTAL
2189 select CRC32
2190 ---help---
2191 Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
2192 adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
2193 used by the Beowulf Linux cluster project. See
2194 <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
2195 information about this driver in particular and Beowulf in general.
2196
2197 To compile this driver as a module, choose M here: the module
2198 will be called yellowfin. This is recommended.
2199
2200config R8169
2201 tristate "Realtek 8169 gigabit ethernet support"
2202 depends on PCI
2203 select CRC32
Francois Romieub7372492008-09-13 15:04:38 +02002204 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07002205 ---help---
2206 Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
2207
2208 To compile this driver as a module, choose M here: the module
2209 will be called r8169. This is recommended.
2210
Linus Torvalds1da177e2005-04-16 15:20:36 -07002211config R8169_VLAN
2212 bool "VLAN support"
2213 depends on R8169 && VLAN_8021Q
2214 ---help---
2215 Say Y here for the r8169 driver to support the functions required
2216 by the kernel 802.1Q code.
Francois Romieu865c6522008-05-11 14:51:00 +02002217
Linus Torvalds1da177e2005-04-16 15:20:36 -07002218 If in doubt, say Y.
2219
Maciej W. Rozycki1a9e8542007-09-14 12:05:00 +01002220config SB1250_MAC
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002221 tristate "SB1250 Gigabit Ethernet support"
2222 depends on SIBYTE_SB1xxx_SOC
Maciej W. Rozyckif5279ff2007-09-21 12:52:10 +01002223 select PHYLIB
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002224 ---help---
2225 This driver supports Gigabit Ethernet interfaces based on the
2226 Broadcom SiByte family of System-On-a-Chip parts. They include
2227 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
2228 and BCM1480 chips.
2229
2230 To compile this driver as a module, choose M here: the module
2231 will be called sb1250-mac.
2232
Francois Romieu890e8d02005-07-30 13:08:43 +02002233config SIS190
Francois Romieue7976372005-09-03 00:57:51 +02002234 tristate "SiS190/SiS191 gigabit ethernet support"
Adrian Bunke9985d52005-08-09 02:41:00 +02002235 depends on PCI
2236 select CRC32
2237 select MII
2238 ---help---
Francois Romieue7976372005-09-03 00:57:51 +02002239 Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
2240 a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
2241 appear in lan on motherboard designs which are based on SiS 965
2242 and SiS 966 south bridge.
Francois Romieu890e8d02005-07-30 13:08:43 +02002243
Adrian Bunke9985d52005-08-09 02:41:00 +02002244 To compile this driver as a module, choose M here: the module
2245 will be called sis190. This is recommended.
Francois Romieu890e8d02005-07-30 13:08:43 +02002246
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002247config SKGE
Stephen Hemminger7a160c72006-02-13 15:48:08 -08002248 tristate "New SysKonnect GigaEthernet support"
2249 depends on PCI
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002250 select CRC32
2251 ---help---
2252 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
2253 and related Gigabit Ethernet adapters. It is a new smaller driver
Stephen Hemminger46a60f22005-09-09 12:54:56 -07002254 with better performance and more complete ethtool support.
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002255
2256 It does not support the link failover and network management
Stephen Hemminger5ad887f2007-09-15 19:35:14 -04002257 features that "portable" vendor supplied sk98lin driver does.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002258
Daniel Drakec6f0d752006-01-21 19:35:34 +00002259 This driver supports adapters based on the original Yukon chipset:
2260 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
2261 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
2262
2263 It does not support the newer Yukon2 chipset: a separate driver,
2264 sky2, is provided for Yukon2-based adapters.
2265
2266 To compile this driver as a module, choose M here: the module
2267 will be called skge. This is recommended.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002268
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002269config SKGE_DEBUG
2270 bool "Debugging interface"
2271 depends on SKGE && DEBUG_FS
2272 help
2273 This option adds the ability to dump driver state for debugging.
GeunSik Lim156f5a72009-06-02 15:01:37 +09002274 The file /sys/kernel/debug/skge/ethX displays the state of the internal
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002275 transmit and receive rings.
2276
2277 If unsure, say N.
2278
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002279config SKY2
Stephen Hemminger8a3e3bf2007-07-09 15:33:38 -07002280 tristate "SysKonnect Yukon2 support"
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002281 depends on PCI
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002282 select CRC32
2283 ---help---
Matt LaPlantecab00892006-10-03 22:36:44 +02002284 This driver supports Gigabit Ethernet adapters based on the
Daniel Drakec6f0d752006-01-21 19:35:34 +00002285 Marvell Yukon 2 chipset:
2286 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
2287 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
2288
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002289 There is companion driver for the older Marvell Yukon and
2290 Genesis based adapters: skge.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002291
2292 To compile this driver as a module, choose M here: the module
2293 will be called sky2. This is recommended.
2294
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002295config SKY2_DEBUG
2296 bool "Debugging interface"
2297 depends on SKY2 && DEBUG_FS
2298 help
2299 This option adds the ability to dump driver state for debugging.
GeunSik Lim156f5a72009-06-02 15:01:37 +09002300 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002301 transmit and receive rings.
Daniel Drakec6f0d752006-01-21 19:35:34 +00002302
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002303 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002304
2305config VIA_VELOCITY
2306 tristate "VIA Velocity support"
Yoichi Yuasa73815532007-05-24 16:12:27 +09002307 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002308 select CRC32
2309 select CRC_CCITT
2310 select MII
2311 help
2312 If you have a VIA "Velocity" based network card say Y here.
2313
2314 To compile this driver as a module, choose M here. The module
2315 will be called via-velocity.
2316
2317config TIGON3
2318 tristate "Broadcom Tigon3 support"
2319 depends on PCI
Matt Carlson158d7ab2008-05-29 01:37:54 -07002320 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002321 help
2322 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
2323
2324 To compile this driver as a module, choose M here: the module
2325 will be called tg3. This is recommended.
2326
Michael Chanb6016b72005-05-26 13:03:09 -07002327config BNX2
2328 tristate "Broadcom NetXtremeII support"
2329 depends on PCI
Michael Chanfba9fe92006-06-12 22:21:25 -07002330 select CRC32
Michael Chan57579f72009-04-04 16:51:14 -07002331 select FW_LOADER
Michael Chanb6016b72005-05-26 13:03:09 -07002332 help
2333 This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
2334
2335 To compile this driver as a module, choose M here: the module
2336 will be called bnx2. This is recommended.
2337
Michael Chana4636962009-06-08 18:14:43 -07002338config CNIC
2339 tristate "Broadcom CNIC support"
Michael Chanbabdb782009-06-10 13:35:28 -07002340 depends on PCI
2341 select BNX2
2342 select UIO
Michael Chana4636962009-06-08 18:14:43 -07002343 help
2344 This driver supports offload features of Broadcom NetXtremeII
2345 gigabit Ethernet cards.
2346
2347 To compile this driver as a module, choose M here: the module
2348 will be called cnic. This is recommended.
2349
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002350config SPIDER_NET
2351 tristate "Spider Gigabit Ethernet driver"
Kou Ishizaki3342cf0e2007-02-20 16:36:14 -06002352 depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
Christoph Hellwig9b158792006-03-15 11:30:44 +01002353 select FW_LOADER
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002354 help
2355 This driver supports the Gigabit Ethernet chips present on the
2356 Cell Processor-Based Blades from IBM.
2357
Zang Roy-r619115e123b82006-11-08 19:49:13 -08002358config TSI108_ETH
2359 tristate "Tundra TSI108 gigabit Ethernet support"
2360 depends on TSI108_BRIDGE
2361 help
2362 This driver supports Tundra TSI108 gigabit Ethernet ports.
2363 To compile this driver as a module, choose M here: the module
2364 will be called tsi108_eth.
2365
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002366config GELIC_NET
2367 tristate "PS3 Gigabit Ethernet driver"
2368 depends on PPC_PS3
Geoff Levand1d32e212008-04-10 07:01:53 +10002369 select PS3_SYS_MANAGER
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002370 help
2371 This driver supports the network device on the PS3 game
2372 console. This driver has built-in support for Ethernet.
2373
2374 To compile this driver as a module, choose M here: the
2375 module will be called ps3_gelic.
2376
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002377config GELIC_WIRELESS
John W. Linville97ed8392008-03-06 13:08:09 -05002378 bool "PS3 Wireless support"
Benjamin Herrenschmidt92c6f8d2009-12-18 11:19:32 -08002379 depends on WLAN
John W. Linville97ed8392008-03-06 13:08:09 -05002380 depends on GELIC_NET
2381 select WIRELESS_EXT
2382 help
2383 This option adds the support for the wireless feature of PS3.
2384 If you have the wireless-less model of PS3 or have no plan to
2385 use wireless feature, disabling this option saves memory. As
2386 the driver automatically distinguishes the models, you can
2387 safely enable this option even if you have a wireless-less model.
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002388
Andy Fleming1577ece2009-02-04 16:42:12 -08002389config FSL_PQ_MDIO
2390 tristate "Freescale PQ MDIO"
2391 depends on FSL_SOC
2392 select PHYLIB
2393 help
2394 This driver supports the MDIO bus used by the gianfar and UCC drivers.
2395
Linus Torvalds1da177e2005-04-16 15:20:36 -07002396config GIANFAR
2397 tristate "Gianfar Ethernet"
Kumar Gala3a831562008-01-28 10:24:30 -06002398 depends on FSL_SOC
Andy Fleming1577ece2009-02-04 16:42:12 -08002399 select FSL_PQ_MDIO
Andy Flemingbb40dcb2005-09-23 22:54:21 -04002400 select PHYLIB
Dave Jiangbf41a7c2007-04-12 10:57:06 -07002401 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07002402 help
Jon Loeligeref82a3062006-06-17 17:52:55 -05002403 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
2404 and MPC86xx family of chips, and the FEC on the 8540.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002405
Li Yangce973b12006-08-14 23:00:11 -07002406config UCC_GETH
Timur Tabi7d776cb2007-03-12 15:40:27 -05002407 tristate "Freescale QE Gigabit Ethernet"
2408 depends on QUICC_ENGINE
Andy Fleming1577ece2009-02-04 16:42:12 -08002409 select FSL_PQ_MDIO
Jan Altenberg296baae2007-06-01 00:46:29 -07002410 select PHYLIB
Li Yangce973b12006-08-14 23:00:11 -07002411 help
Timur Tabi7d776cb2007-03-12 15:40:27 -05002412 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
2413 which is available on some Freescale SOCs.
Li Yangce973b12006-08-14 23:00:11 -07002414
Michael Reissd5b90492007-04-13 01:26:19 -05002415config UGETH_TX_ON_DEMAND
2416 bool "Transmit on Demand support"
Li Yangce973b12006-08-14 23:00:11 -07002417 depends on UCC_GETH
2418
Linus Torvalds1da177e2005-04-16 15:20:36 -07002419config MV643XX_ETH
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002420 tristate "Marvell Discovery (643XX) and Orion ethernet support"
Gabriel Paubertdfa92642009-05-25 22:46:19 -07002421 depends on MV64X60 || PPC32 || PLAT_ORION
Lennert Buytenhekab307a32009-02-24 15:41:32 +00002422 select INET_LRO
Lennert Buytenheked944932008-08-26 13:34:19 +02002423 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002424 help
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002425 This driver supports the gigabit ethernet MACs in the
2426 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
2427 in the Marvell Orion ARM SoC family.
2428
2429 Some boards that use the Discovery chipset are the Momenco
2430 Ocelot C and Jaguar ATX and Pegasos II.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002431
Grant Likely92744982009-04-25 12:53:39 +00002432config XILINX_LL_TEMAC
2433 tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
John Linne44171f2010-04-08 07:08:02 +00002434 depends on PPC || MICROBLAZE
Grant Likely92744982009-04-25 12:53:39 +00002435 select PHYLIB
Grant Likely92744982009-04-25 12:53:39 +00002436 help
2437 This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
2438 core used in Xilinx Spartan and Virtex FPGAs
2439
Ron Mercer5a4faa872006-07-25 00:40:21 -07002440config QLA3XXX
2441 tristate "QLogic QLA3XXX Network Driver Support"
2442 depends on PCI
2443 help
2444 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
2445
2446 To compile this driver as a module, choose M here: the module
2447 will be called qla3xxx.
2448
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002449config ATL1
Jay Cliburna6d1f362008-09-27 04:17:22 +00002450 tristate "Atheros/Attansic L1 Gigabit Ethernet support"
2451 depends on PCI
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002452 select CRC32
2453 select MII
2454 help
Jay Cliburna6d1f362008-09-27 04:17:22 +00002455 This driver supports the Atheros/Attansic L1 gigabit ethernet
2456 adapter.
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002457
2458 To compile this driver as a module, choose M here. The module
2459 will be called atl1.
2460
Jie Yanga6a53252008-07-18 11:37:13 +08002461config ATL1E
2462 tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
2463 depends on PCI && EXPERIMENTAL
2464 select CRC32
2465 select MII
2466 help
2467 This driver supports the Atheros L1E gigabit ethernet adapter.
2468
2469 To compile this driver as a module, choose M here. The module
2470 will be called atl1e.
2471
Jie Yang43250dd2009-02-18 17:24:15 -08002472config ATL1C
2473 tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
2474 depends on PCI && EXPERIMENTAL
2475 select CRC32
2476 select MII
2477 help
2478 This driver supports the Atheros L1C gigabit ethernet adapter.
2479
2480 To compile this driver as a module, choose M here. The module
2481 will be called atl1c.
2482
Guo-Fu Tseng95252232008-09-16 01:00:11 +08002483config JME
2484 tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
2485 depends on PCI
2486 select CRC32
2487 select MII
2488 ---help---
2489 This driver supports the PCI-Express gigabit ethernet adapters
2490 based on JMicron JMC250 chipset.
2491
2492 To compile this driver as a module, choose M here. The module
2493 will be called jme.
2494
Oskar Schirmer8b0215a2009-06-10 12:58:48 -07002495config S6GMAC
2496 tristate "S6105 GMAC ethernet support"
2497 depends on XTENSA_VARIANT_S6000
2498 select PHYLIB
2499 help
2500 This driver supports the on chip ethernet device on the
2501 S6105 xtensa processor.
2502
2503 To compile this driver as a module, choose M here. The module
2504 will be called s6gmac.
2505
Giuseppe Cavallaro47dd7a52009-10-14 15:13:45 -07002506source "drivers/net/stmmac/Kconfig"
2507
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002508endif # NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002509
2510#
2511# 10 Gigabit Ethernet
2512#
2513
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002514menuconfig NETDEV_10000
2515 bool "Ethernet (10000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002516 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002517 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02002518 ---help---
2519 Say Y here to get to see options for 10 Gigabit Ethernet drivers.
2520 This option alone does not add any kernel code.
2521
2522 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002523
2524if NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002525
Ben Hutchings1b1c2e92009-04-29 08:04:46 +00002526config MDIO
2527 tristate
2528
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002529config CHELSIO_T1
2530 tristate "Chelsio 10Gb Ethernet support"
2531 depends on PCI
Stephen Hemminger57834ca2006-12-01 16:36:19 -08002532 select CRC32
Ben Hutchings23c33202009-04-29 08:06:34 +00002533 select MDIO
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002534 help
Stephen Hemmingerf1d3d382006-12-01 16:36:16 -08002535 This driver supports Chelsio gigabit and 10-gigabit
2536 Ethernet cards. More information about adapter features and
2537 performance tuning is in <file:Documentation/networking/cxgb.txt>.
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002538
2539 For general information about Chelsio and our products, visit
2540 our website at <http://www.chelsio.com>.
2541
2542 For customer support, please visit our customer support page at
2543 <http://www.chelsio.com/support.htm>.
2544
2545 Please send feedback to <linux-bugs@chelsio.com>.
2546
2547 To compile this driver as a module, choose M here: the module
2548 will be called cxgb.
2549
Stephen Hemminger352c4172006-12-01 16:36:17 -08002550config CHELSIO_T1_1G
2551 bool "Chelsio gigabit Ethernet support"
2552 depends on CHELSIO_T1
2553 help
2554 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
2555 are using only 10G cards say 'N' here.
2556
James Bottomley58daa682008-12-30 10:20:24 -06002557config CHELSIO_T3_DEPENDS
2558 tristate
2559 depends on PCI && INET
2560 default y
2561
Divy Le Ray4d22de32007-01-18 22:04:14 -05002562config CHELSIO_T3
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002563 tristate "Chelsio Communications T3 10Gb Ethernet support"
James Bottomley58daa682008-12-30 10:20:24 -06002564 depends on CHELSIO_T3_DEPENDS
Divy Le Ray2e283962007-03-18 13:10:06 -07002565 select FW_LOADER
Ben Hutchings0f07c4e2009-04-29 08:07:20 +00002566 select MDIO
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002567 help
2568 This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
2569 adapters.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002570
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002571 For general information about Chelsio and our products, visit
2572 our website at <http://www.chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002573
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002574 For customer support, please visit our customer support page at
2575 <http://www.chelsio.com/support.htm>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002576
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002577 Please send feedback to <linux-bugs@chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002578
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002579 To compile this driver as a module, choose M here: the module
2580 will be called cxgb3.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002581
Dimitris Michailidis43e9da82010-04-01 15:28:27 +00002582config CHELSIO_T4_DEPENDS
2583 tristate
2584 depends on PCI && INET
2585 default y
2586
2587config CHELSIO_T4
2588 tristate "Chelsio Communications T4 Ethernet support"
2589 depends on CHELSIO_T4_DEPENDS
2590 select FW_LOADER
2591 select MDIO
2592 help
2593 This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
2594 adapters.
2595
2596 For general information about Chelsio and our products, visit
2597 our website at <http://www.chelsio.com>.
2598
2599 For customer support, please visit our customer support page at
2600 <http://www.chelsio.com/support.htm>.
2601
2602 Please send feedback to <linux-bugs@chelsio.com>.
2603
2604 To compile this driver as a module choose M here; the module
2605 will be called cxgb4.
2606
Casey Leedomcfc9b162010-06-25 12:15:33 +00002607config CHELSIO_T4VF_DEPENDS
2608 tristate
2609 depends on PCI && INET
2610 default y
2611
2612config CHELSIO_T4VF
2613 tristate "Chelsio Communications T4 Virtual Function Ethernet support"
2614 depends on CHELSIO_T4VF_DEPENDS
2615 help
2616 This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
2617 adapters with PCI-E SR-IOV Virtual Functions.
2618
2619 For general information about Chelsio and our products, visit
2620 our website at <http://www.chelsio.com>.
2621
2622 For customer support, please visit our customer support page at
2623 <http://www.chelsio.com/support.htm>.
2624
2625 Please send feedback to <linux-bugs@chelsio.com>.
2626
2627 To compile this driver as a module choose M here; the module
2628 will be called cxgb4vf.
2629
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002630config EHEA
2631 tristate "eHEA Ethernet support"
Nathan Lynch60d50192008-06-04 08:31:28 +10002632 depends on IBMEBUS && INET && SPARSEMEM
Jan-Bernd Themannd4dc4ec2007-09-25 16:16:34 -07002633 select INET_LRO
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002634 ---help---
2635 This driver supports the IBM pSeries eHEA ethernet adapter.
2636
2637 To compile the driver as a module, choose M here. The module
2638 will be called ehea.
2639
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002640config ENIC
Vasanthy Kolluri641cb852010-03-18 16:20:04 +00002641 tristate "Cisco VIC Ethernet NIC Support"
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002642 depends on PCI && INET
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002643 help
Vasanthy Kolluri641cb852010-03-18 16:20:04 +00002644 This enables the support for the Cisco VIC Ethernet card.
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002645
Auke Kok9a799d72007-09-15 14:07:45 -07002646config IXGBE
2647 tristate "Intel(R) 10GbE PCI Express adapters support"
Mallikarjuna R Chilakala177db6f2008-06-18 15:32:19 -07002648 depends on PCI && INET
Ben Hutchings6b73e102009-04-29 08:08:58 +00002649 select MDIO
Auke Kok9a799d72007-09-15 14:07:45 -07002650 ---help---
2651 This driver supports Intel(R) 10GbE PCI Express family of
2652 adapters. For more information on how to identify your adapter, go
2653 to the Adapter & Driver ID Guide at:
2654
2655 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2656
2657 For general information and support, go to the Intel support
2658 website at:
2659
2660 <http://support.intel.com>
2661
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002662 To compile this driver as a module, choose M here. The module
Auke Kok9a799d72007-09-15 14:07:45 -07002663 will be called ixgbe.
2664
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002665config IXGBE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002666 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002667 default y
2668 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002669 ---help---
2670 Say Y here if you want to use Direct Cache Access (DCA) in the
2671 driver. DCA is a method for warming the CPU cache before data
2672 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002673
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002674config IXGBE_DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002675 bool "Data Center Bridging (DCB) Support"
2676 default n
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002677 depends on IXGBE && DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002678 ---help---
2679 Say Y here if you want to use Data Center Bridging (DCB) in the
2680 driver.
2681
2682 If unsure, say N.
2683
Greg Roseecc67032010-01-09 02:24:50 +00002684config IXGBEVF
2685 tristate "Intel(R) 82599 Virtual Function Ethernet support"
2686 depends on PCI_MSI
2687 ---help---
2688 This driver supports Intel(R) 82599 virtual functions. For more
2689 information on how to identify your adapter, go to the Adapter &
2690 Driver ID Guide at:
2691
2692 <http://support.intel.com/support/network/sb/CS-008441.htm>
2693
2694 For general information and support, go to the Intel support
2695 website at:
2696
2697 <http://support.intel.com>
2698
2699 More specific information on configuring the driver is in
2700 <file:Documentation/networking/ixgbevf.txt>.
2701
2702 To compile this driver as a module, choose M here. The module
2703 will be called ixgbevf. MSI-X interrupt support is required
2704 for this driver to work correctly.
2705
Linus Torvalds1da177e2005-04-16 15:20:36 -07002706config IXGB
2707 tristate "Intel(R) PRO/10GbE support"
2708 depends on PCI
2709 ---help---
Auke Kok9a799d72007-09-15 14:07:45 -07002710 This driver supports Intel(R) PRO/10GbE family of adapters for
2711 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
2712 instead. For more information on how to identify your adapter, go
Linus Torvalds1da177e2005-04-16 15:20:36 -07002713 to the Adapter & Driver ID Guide at:
2714
2715 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2716
2717 For general information and support, go to the Intel support
2718 website at:
2719
2720 <http://support.intel.com>
2721
2722 More specific information on configuring the driver is in
2723 <file:Documentation/networking/ixgb.txt>.
2724
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002725 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002726 will be called ixgb.
2727
Linus Torvalds1da177e2005-04-16 15:20:36 -07002728config S2IO
2729 tristate "S2IO 10Gbe XFrame NIC"
2730 depends on PCI
2731 ---help---
2732 This driver supports the 10Gbe XFrame NIC of S2IO.
Akinobu Mita9eb343a2005-10-21 19:06:42 +09002733 More specific information on configuring the driver is in
2734 <file:Documentation/networking/s2io.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002735
Ramkrishna Vepaf1782852009-04-01 18:15:24 +00002736config VXGE
2737 tristate "Neterion X3100 Series 10GbE PCIe Server Adapter"
2738 depends on PCI && INET
2739 ---help---
2740 This driver supports Neterion Inc's X3100 Series 10 GbE PCIe
2741 I/O Virtualized Server Adapter.
2742 More specific information on configuring the driver is in
2743 <file:Documentation/networking/vxge.txt>.
2744
2745config VXGE_DEBUG_TRACE_ALL
2746 bool "Enabling All Debug trace statments in driver"
2747 default n
2748 depends on VXGE
2749 ---help---
2750 Say Y here if you want to enabling all the debug trace statements in
2751 driver. By default only few debug trace statements are enabled.
2752
Brice Goglin0da34b62006-05-23 06:10:15 -04002753config MYRI10GE
2754 tristate "Myricom Myri-10G Ethernet support"
Randy Dunlape0d5dab2007-10-18 21:53:50 -07002755 depends on PCI && INET
Brice Goglin0da34b62006-05-23 06:10:15 -04002756 select FW_LOADER
2757 select CRC32
Andrew Gallatin1e6e9342007-09-17 11:37:42 -07002758 select INET_LRO
Brice Goglin0da34b62006-05-23 06:10:15 -04002759 ---help---
2760 This driver supports Myricom Myri-10G Dual Protocol interface in
2761 Ethernet mode. If the eeprom on your board is not recent enough,
2762 you will need a newer firmware image.
2763 You may get this image or more information, at:
2764
Brice Goglind2794902006-09-05 21:58:50 -04002765 <http://www.myri.com/scs/download-Myri10GE.html>
Brice Goglin0da34b62006-05-23 06:10:15 -04002766
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002767 To compile this driver as a module, choose M here. The module
Brice Goglin0da34b62006-05-23 06:10:15 -04002768 will be called myri10ge.
2769
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002770config MYRI10GE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002771 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002772 default y
2773 depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002774 ---help---
2775 Say Y here if you want to use Direct Cache Access (DCA) in the
2776 driver. DCA is a method for warming the CPU cache before data
2777 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002778
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002779config NETXEN_NIC
2780 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
Randy Dunlap5ac36612006-11-16 21:39:11 -08002781 depends on PCI
Anirban Chakraborty06aeb782010-06-23 11:49:42 -07002782 select FW_LOADER
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002783 help
2784 This enables the support for NetXen's Gigabit Ethernet card.
2785
David S. Millera3138df2007-10-09 01:54:01 -07002786config NIU
2787 tristate "Sun Neptune 10Gbit Ethernet support"
2788 depends on PCI
Randy Dunlapc557c152009-12-10 13:50:56 -08002789 select CRC32
David S. Millera3138df2007-10-09 01:54:01 -07002790 help
2791 This enables support for cards based upon Sun's
2792 Neptune chipset.
2793
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002794config PASEMI_MAC
2795 tristate "PA Semi 1/10Gbit MAC"
Michael Ellerman5beaf7d2008-03-28 12:17:33 +11002796 depends on PPC_PASEMI && PCI
Olof Johanssonbb6e9592007-05-08 00:47:54 -05002797 select PHYLIB
Olof Johansson28ae79f2007-11-28 20:57:27 -06002798 select INET_LRO
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002799 help
2800 This driver supports the on-chip 1/10Gbit Ethernet controller on
2801 PA Semi's PWRficient line of chips.
2802
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07002803config MLX4_EN
2804 tristate "Mellanox Technologies 10Gbit Ethernet support"
2805 depends on PCI && INET
2806 select MLX4_CORE
2807 select INET_LRO
2808 help
2809 This driver supports Mellanox Technologies ConnectX Ethernet
2810 devices.
2811
Roland Dreier225c7b12007-05-08 18:00:38 -07002812config MLX4_CORE
2813 tristate
2814 depends on PCI
2815 default n
2816
2817config MLX4_DEBUG
2818 bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
Paul Mundtf550d942007-05-10 12:50:28 +09002819 depends on MLX4_CORE
Roland Dreier225c7b12007-05-08 18:00:38 -07002820 default y
2821 ---help---
2822 This option causes debugging code to be compiled into the
2823 mlx4_core driver. The output can be turned on via the
2824 debug_level module parameter (which can also be set after
2825 the driver is loaded through sysfs).
2826
Andy Gospodarek1a348cc2007-09-17 18:50:36 -07002827config TEHUTI
2828 tristate "Tehuti Networks 10G Ethernet"
2829 depends on PCI
2830 help
2831 Tehuti Networks 10G Ethernet NIC
2832
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002833config BNX2X
2834 tristate "Broadcom NetXtremeII 10Gb support"
2835 depends on PCI
Vladislav Zolotarov94a78b72009-04-27 03:27:43 -07002836 select FW_LOADER
Lee Schermerhorn07b270e2007-12-13 16:02:59 -08002837 select ZLIB_INFLATE
Eilon Greenstein34f80b02008-06-23 20:33:01 -07002838 select LIBCRC32C
Eilon Greenstein01cd4522009-08-12 08:23:08 +00002839 select MDIO
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002840 help
2841 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
2842 To compile this driver as a module, choose M here: the module
2843 will be called bnx2x. This is recommended.
2844
Amit Kumar Salecha0ec00f02010-01-13 00:37:26 +00002845config QLCNIC
2846 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
2847 depends on PCI
Anirban Chakraborty06aeb782010-06-23 11:49:42 -07002848 select FW_LOADER
Amit Kumar Salecha0ec00f02010-01-13 00:37:26 +00002849 help
2850 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
2851 devices.
2852
Ron Mercerc4e84bd2008-09-18 11:56:28 -04002853config QLGE
2854 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
2855 depends on PCI
2856 help
2857 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
2858
2859 To compile this driver as a module, choose M here: the module
2860 will be called qlge.
2861
Ben Hutchings8ceee662008-04-27 12:55:59 +01002862source "drivers/net/sfc/Kconfig"
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002863
Sathya Perla6b7c5b92009-03-11 23:32:03 -07002864source "drivers/net/benet/Kconfig"
2865
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002866endif # NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002867
Linus Torvalds1da177e2005-04-16 15:20:36 -07002868source "drivers/net/tokenring/Kconfig"
2869
2870source "drivers/net/wireless/Kconfig"
2871
Inaky Perez-Gonzalez143ee2d2008-12-23 16:18:48 -08002872source "drivers/net/wimax/Kconfig"
2873
Jeff Garzik5b2fc492007-05-09 21:31:55 -04002874source "drivers/net/usb/Kconfig"
2875
Linus Torvalds1da177e2005-04-16 15:20:36 -07002876source "drivers/net/pcmcia/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002877
2878source "drivers/net/wan/Kconfig"
2879
2880source "drivers/atm/Kconfig"
2881
Sergey Lapin84594642009-06-08 12:18:51 +00002882source "drivers/ieee802154/Kconfig"
2883
Linus Torvalds1da177e2005-04-16 15:20:36 -07002884source "drivers/s390/net/Kconfig"
2885
Sjur Braendeland9b271052010-03-30 13:56:30 +00002886source "drivers/net/caif/Kconfig"
2887
Jeremy Fitzhardinge0d160212007-07-17 18:37:06 -07002888config XEN_NETDEV_FRONTEND
2889 tristate "Xen network device frontend driver"
2890 depends on XEN
2891 default y
2892 help
2893 The network device frontend driver allows the kernel to
2894 access network devices exported exported by a virtual
2895 machine containing a physical network device driver. The
2896 frontend driver is intended for unprivileged guest domains;
2897 if you are compiling a kernel for a Xen guest, you almost
2898 certainly want to enable this.
2899
Linus Torvalds1da177e2005-04-16 15:20:36 -07002900config ISERIES_VETH
2901 tristate "iSeries Virtual Ethernet driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002902 depends on PPC_ISERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07002903
Matt Porterf89efd52005-09-09 12:10:10 -07002904config RIONET
2905 tristate "RapidIO Ethernet over messaging driver support"
Randy Dunlapa81c52a2006-11-01 21:18:58 -08002906 depends on RAPIDIO
Matt Porterf89efd52005-09-09 12:10:10 -07002907
2908config RIONET_TX_SIZE
2909 int "Number of outbound queue entries"
2910 depends on RIONET
2911 default "128"
2912
2913config RIONET_RX_SIZE
2914 int "Number of inbound queue entries"
2915 depends on RIONET
2916 default "128"
2917
Linus Torvalds1da177e2005-04-16 15:20:36 -07002918config FDDI
Dave Joneseb560922008-12-27 20:43:48 -08002919 tristate "FDDI driver support"
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002920 depends on (PCI || EISA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002921 help
2922 Fiber Distributed Data Interface is a high speed local area network
2923 design; essentially a replacement for high speed Ethernet. FDDI can
2924 run over copper or fiber. If you are connected to such a network and
2925 want a driver for the FDDI card in your computer, say Y here (and
2926 then also Y to the driver for your FDDI card, below). Most people
2927 will say N.
2928
2929config DEFXX
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002930 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
2931 depends on FDDI && (PCI || EISA || TC)
2932 ---help---
2933 This is support for the DIGITAL series of TURBOchannel (DEFTA),
2934 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
2935 to a local FDDI network.
2936
2937 To compile this driver as a module, choose M here: the module
2938 will be called defxx. If unsure, say N.
2939
2940config DEFXX_MMIO
2941 bool
2942 prompt "Use MMIO instead of PIO" if PCI || EISA
2943 depends on DEFXX
2944 default n if PCI || EISA
2945 default y
2946 ---help---
2947 This instructs the driver to use EISA or PCI memory-mapped I/O
2948 (MMIO) as appropriate instead of programmed I/O ports (PIO).
2949 Enabling this gives an improvement in processing time in parts
2950 of the driver, but it may cause problems with EISA (DEFEA)
2951 adapters. TURBOchannel does not have the concept of I/O ports,
2952 so MMIO is always used for these (DEFTA) adapters.
2953
2954 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002955
2956config SKFP
2957 tristate "SysKonnect FDDI PCI support"
2958 depends on FDDI && PCI
Akinobu Mitabc63eb92006-12-19 13:09:08 -08002959 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -07002960 ---help---
2961 Say Y here if you have a SysKonnect FDDI PCI adapter.
2962 The following adapters are supported by this driver:
2963 - SK-5521 (SK-NET FDDI-UP)
2964 - SK-5522 (SK-NET FDDI-UP DAS)
2965 - SK-5541 (SK-NET FDDI-FP)
2966 - SK-5543 (SK-NET FDDI-LP)
2967 - SK-5544 (SK-NET FDDI-LP DAS)
2968 - SK-5821 (SK-NET FDDI-UP64)
2969 - SK-5822 (SK-NET FDDI-UP64 DAS)
2970 - SK-5841 (SK-NET FDDI-FP64)
2971 - SK-5843 (SK-NET FDDI-LP64)
2972 - SK-5844 (SK-NET FDDI-LP64 DAS)
2973 - Netelligent 100 FDDI DAS Fibre SC
2974 - Netelligent 100 FDDI SAS Fibre SC
2975 - Netelligent 100 FDDI DAS UTP
2976 - Netelligent 100 FDDI SAS UTP
2977 - Netelligent 100 FDDI SAS Fibre MIC
2978
2979 Read <file:Documentation/networking/skfp.txt> for information about
2980 the driver.
2981
2982 Questions concerning this driver can be addressed to:
2983 <linux@syskonnect.de>
2984
2985 To compile this driver as a module, choose M here: the module
2986 will be called skfp. This is recommended.
2987
2988config HIPPI
2989 bool "HIPPI driver support (EXPERIMENTAL)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002990 depends on EXPERIMENTAL && INET && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002991 help
2992 HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
2993 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
2994 can run over copper (25m) or fiber (300m on multi-mode or 10km on
2995 single-mode). HIPPI networks are commonly used for clusters and to
2996 connect to super computers. If you are connected to a HIPPI network
2997 and have a HIPPI network card in your computer that you want to use
2998 under Linux, say Y here (you must also remember to enable the driver
2999 for your HIPPI card below). Most people will say N here.
3000
3001config ROADRUNNER
3002 tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
3003 depends on HIPPI && PCI
3004 help
3005 Say Y here if this is your PCI HIPPI network card.
3006
3007 To compile this driver as a module, choose M here: the module
3008 will be called rrunner. If unsure, say N.
3009
3010config ROADRUNNER_LARGE_RINGS
3011 bool "Use large TX/RX rings (EXPERIMENTAL)"
3012 depends on ROADRUNNER
3013 help
3014 If you say Y here, the RoadRunner driver will preallocate up to 2 MB
3015 of additional memory to allow for fastest operation, both for
3016 transmitting and receiving. This memory cannot be used by any other
3017 kernel code or by user space programs. Say Y here only if you have
3018 the memory.
3019
3020config PLIP
3021 tristate "PLIP (parallel port) support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003022 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07003023 ---help---
3024 PLIP (Parallel Line Internet Protocol) is used to create a
3025 reasonably fast mini network consisting of two (or, rarely, more)
3026 local machines. A PLIP link from a Linux box is a popular means to
3027 install a Linux distribution on a machine which doesn't have a
3028 CD-ROM drive (a minimal system has to be transferred with floppies
3029 first). The kernels on both machines need to have this PLIP option
3030 enabled for this to work.
3031
3032 The PLIP driver has two modes, mode 0 and mode 1. The parallel
3033 ports (the connectors at the computers with 25 holes) are connected
3034 with "null printer" or "Turbo Laplink" cables which can transmit 4
3035 bits at a time (mode 0) or with special PLIP cables, to be used on
3036 bidirectional parallel ports only, which can transmit 8 bits at a
3037 time (mode 1); you can find the wiring of these cables in
3038 <file:Documentation/networking/PLIP.txt>. The cables can be up to
3039 15m long. Mode 0 works also if one of the machines runs DOS/Windows
3040 and has some PLIP software installed, e.g. the Crynwr PLIP packet
3041 driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
3042 and winsock or NCSA's telnet.
3043
3044 If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
3045 as the NET-3-HOWTO, both available from
3046 <http://www.tldp.org/docs.html#howto>. Note that the PLIP
3047 protocol has been changed and this PLIP driver won't work together
3048 with the PLIP support in Linux versions 1.0.x. This option enlarges
3049 your kernel by about 8 KB.
3050
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003051 To compile this driver as a module, choose M here. The module
3052 will be called plip. If unsure, say Y or M, in case you buy
3053 a laptop later.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003054
3055config PPP
3056 tristate "PPP (point-to-point protocol) support"
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003057 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07003058 ---help---
3059 PPP (Point to Point Protocol) is a newer and better SLIP. It serves
3060 the same purpose: sending Internet traffic over telephone (and other
3061 serial) lines. Ask your access provider if they support it, because
3062 otherwise you can't use it; most Internet access providers these
3063 days support PPP rather than SLIP.
3064
3065 To use PPP, you need an additional program called pppd as described
3066 in the PPP-HOWTO, available at
3067 <http://www.tldp.org/docs.html#howto>. Make sure that you have
3068 the version of pppd recommended in <file:Documentation/Changes>.
3069 The PPP option enlarges your kernel by about 16 KB.
3070
3071 There are actually two versions of PPP: the traditional PPP for
3072 asynchronous lines, such as regular analog phone lines, and
3073 synchronous PPP which can be used over digital ISDN lines for
3074 example. If you want to use PPP over phone lines or other
3075 asynchronous serial lines, you need to say Y (or M) here and also to
3076 the next option, "PPP support for async serial ports". For PPP over
3077 synchronous lines, you should say Y (or M) here and to "Support
3078 synchronous PPP", below.
3079
3080 If you said Y to "Version information on all symbols" above, then
3081 you cannot compile the PPP driver into the kernel; you can then only
3082 compile it as a module. To compile this driver as a module, choose M
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003083 here. The module will be called ppp_generic.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003084
3085config PPP_MULTILINK
3086 bool "PPP multilink support (EXPERIMENTAL)"
3087 depends on PPP && EXPERIMENTAL
3088 help
3089 PPP multilink is a protocol (defined in RFC 1990) which allows you
3090 to combine several (logical or physical) lines into one logical PPP
3091 connection, so that you can utilize your full bandwidth.
3092
3093 This has to be supported at the other end as well and you need a
3094 version of the pppd daemon which understands the multilink protocol.
3095
3096 If unsure, say N.
3097
3098config PPP_FILTER
3099 bool "PPP filtering"
3100 depends on PPP
3101 help
3102 Say Y here if you want to be able to filter the packets passing over
3103 PPP interfaces. This allows you to control which packets count as
3104 activity (i.e. which packets will reset the idle timer or bring up
Jon Mason47c51432006-02-12 11:53:04 -06003105 a demand-dialed link) and which packets are to be dropped entirely.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003106 You need to say Y here if you wish to use the pass-filter and
3107 active-filter options to pppd.
3108
3109 If unsure, say N.
3110
3111config PPP_ASYNC
3112 tristate "PPP support for async serial ports"
3113 depends on PPP
3114 select CRC_CCITT
3115 ---help---
3116 Say Y (or M) here if you want to be able to use PPP over standard
3117 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
3118 a modem (not a synchronous or ISDN modem) to contact your ISP, you
3119 need this option.
3120
3121 To compile this driver as a module, choose M here.
3122
3123 If unsure, say Y.
3124
3125config PPP_SYNC_TTY
3126 tristate "PPP support for sync tty ports"
3127 depends on PPP
3128 help
3129 Say Y (or M) here if you want to be able to use PPP over synchronous
3130 (HDLC) tty devices, such as the SyncLink adapter. These devices
3131 are often used for high-speed leased lines like T1/E1.
3132
3133 To compile this driver as a module, choose M here.
3134
3135config PPP_DEFLATE
3136 tristate "PPP Deflate compression"
3137 depends on PPP
3138 select ZLIB_INFLATE
3139 select ZLIB_DEFLATE
3140 ---help---
3141 Support for the Deflate compression method for PPP, which uses the
3142 Deflate algorithm (the same algorithm that gzip uses) to compress
3143 each PPP packet before it is sent over the wire. The machine at the
3144 other end of the PPP link (usually your ISP) has to support the
3145 Deflate compression method as well for this to be useful. Even if
3146 they don't support it, it is safe to say Y here.
3147
3148 To compile this driver as a module, choose M here.
3149
3150config PPP_BSDCOMP
3151 tristate "PPP BSD-Compress compression"
3152 depends on PPP
3153 ---help---
3154 Support for the BSD-Compress compression method for PPP, which uses
3155 the LZW compression method to compress each PPP packet before it is
3156 sent over the wire. The machine at the other end of the PPP link
3157 (usually your ISP) has to support the BSD-Compress compression
3158 method as well for this to be useful. Even if they don't support it,
3159 it is safe to say Y here.
3160
3161 The PPP Deflate compression method ("PPP Deflate compression",
3162 above) is preferable to BSD-Compress, because it compresses better
3163 and is patent-free.
3164
3165 Note that the BSD compression code will always be compiled as a
3166 module; it is called bsd_comp and will show up in the directory
3167 modules once you have said "make modules". If unsure, say N.
3168
Matt Domschb3f9b922005-11-08 09:40:47 -08003169config PPP_MPPE
3170 tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
3171 depends on PPP && EXPERIMENTAL
3172 select CRYPTO
3173 select CRYPTO_SHA1
3174 select CRYPTO_ARC4
Patrick McHardybcbaecb2006-10-25 16:49:36 +10003175 select CRYPTO_ECB
Matt Domschb3f9b922005-11-08 09:40:47 -08003176 ---help---
3177 Support for the MPPE Encryption protocol, as employed by the
3178 Microsoft Point-to-Point Tunneling Protocol.
3179
3180 See http://pptpclient.sourceforge.net/ for information on
3181 configuring PPTP clients and servers to utilize this method.
3182
Linus Torvalds1da177e2005-04-16 15:20:36 -07003183config PPPOE
3184 tristate "PPP over Ethernet (EXPERIMENTAL)"
3185 depends on EXPERIMENTAL && PPP
3186 help
3187 Support for PPP over Ethernet.
3188
3189 This driver requires the latest version of pppd from the CVS
3190 repository at cvs.samba.org. Alternatively, see the
3191 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
3192 which contains instruction on how to use this driver (under
3193 the heading "Kernel mode PPPoE").
3194
3195config PPPOATM
3196 tristate "PPP over ATM"
3197 depends on ATM && PPP
3198 help
3199 Support PPP (Point to Point Protocol) encapsulated in ATM frames.
3200 This implementation does not yet comply with section 8 of RFC2364,
3201 which can lead to bad results if the ATM peer loses state and
3202 changes its encapsulation unilaterally.
3203
James Chapman3557baa2007-06-27 15:49:24 -07003204config PPPOL2TP
3205 tristate "PPP over L2TP (EXPERIMENTAL)"
James Chapmanfd558d12010-04-02 06:18:33 +00003206 depends on EXPERIMENTAL && L2TP && PPP
James Chapman3557baa2007-06-27 15:49:24 -07003207 help
3208 Support for PPP-over-L2TP socket family. L2TP is a protocol
3209 used by ISPs and enterprises to tunnel PPP traffic over UDP
3210 tunnels. L2TP is replacing PPTP for VPN uses.
3211
Linus Torvalds1da177e2005-04-16 15:20:36 -07003212config SLIP
3213 tristate "SLIP (serial line) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003214 ---help---
3215 Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
3216 connect to your Internet service provider or to connect to some
3217 other local Unix box or if you want to configure your Linux box as a
3218 Slip/CSlip server for other people to dial in. SLIP (Serial Line
3219 Internet Protocol) is a protocol used to send Internet traffic over
3220 serial connections such as telephone lines or null modem cables;
3221 nowadays, the protocol PPP is more commonly used for this same
3222 purpose.
3223
3224 Normally, your access provider has to support SLIP in order for you
3225 to be able to use it, but there is now a SLIP emulator called SLiRP
3226 around (available from
3227 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3228 allows you to use SLIP over a regular dial up shell connection. If
3229 you plan to use SLiRP, make sure to say Y to CSLIP, below. The
3230 NET-3-HOWTO, available from
3231 <http://www.tldp.org/docs.html#howto>, explains how to
3232 configure SLIP. Note that you don't need this option if you just
3233 want to run term (term is a program which gives you almost full
3234 Internet connectivity if you have a regular dial up shell account on
3235 some Internet connected Unix computer. Read
3236 <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
3237 support will enlarge your kernel by about 4 KB. If unsure, say N.
3238
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003239 To compile this driver as a module, choose M here. The module
3240 will be called slip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003241
3242config SLIP_COMPRESSED
3243 bool "CSLIP compressed headers"
3244 depends on SLIP
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003245 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07003246 ---help---
3247 This protocol is faster than SLIP because it uses compression on the
3248 TCP/IP headers (not on the data itself), but it has to be supported
3249 on both ends. Ask your access provider if you are not sure and
3250 answer Y, just in case. You will still be able to use plain SLIP. If
3251 you plan to use SLiRP, the SLIP emulator (available from
3252 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3253 allows you to use SLIP over a regular dial up shell connection, you
3254 definitely want to say Y here. The NET-3-HOWTO, available from
3255 <http://www.tldp.org/docs.html#howto>, explains how to configure
3256 CSLIP. This won't enlarge your kernel.
3257
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003258config SLHC
3259 tristate
3260 help
3261 This option enables Van Jacobsen serial line header compression
3262 routines.
3263
Linus Torvalds1da177e2005-04-16 15:20:36 -07003264config SLIP_SMART
3265 bool "Keepalive and linefill"
3266 depends on SLIP
3267 help
3268 Adds additional capabilities to the SLIP driver to support the
3269 RELCOM line fill and keepalive monitoring. Ideal on poor quality
3270 analogue lines.
3271
3272config SLIP_MODE_SLIP6
3273 bool "Six bit SLIP encapsulation"
3274 depends on SLIP
3275 help
3276 Just occasionally you may need to run IP over hostile serial
3277 networks that don't pass all control characters or are only seven
3278 bit. Saying Y here adds an extra mode you can use with SLIP:
3279 "slip6". In this mode, SLIP will only send normal ASCII symbols over
3280 the serial device. Naturally, this has to be supported at the other
3281 end of the link as well. It's good enough, for example, to run IP
3282 over the async ports of a Camtec JNT Pad. If unsure, say N.
3283
3284config NET_FC
3285 bool "Fibre Channel driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003286 depends on SCSI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07003287 help
3288 Fibre Channel is a high speed serial protocol mainly used to connect
3289 large storage devices to the computer; it is compatible with and
3290 intended to replace SCSI.
3291
3292 If you intend to use Fibre Channel, you need to have a Fibre channel
3293 adaptor card in your computer; say Y here and to the driver for your
3294 adaptor below. You also should have said Y to "SCSI support" and
3295 "SCSI generic support".
3296
Linus Torvalds1da177e2005-04-16 15:20:36 -07003297config NETCONSOLE
Amerigo Wangecbacf82010-03-21 23:59:23 +00003298 tristate "Network console logging support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003299 ---help---
3300 If you want to log kernel messages over the network, enable this.
3301 See <file:Documentation/networking/netconsole.txt> for details.
3302
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003303config NETCONSOLE_DYNAMIC
Amerigo Wangecbacf82010-03-21 23:59:23 +00003304 bool "Dynamic reconfiguration of logging targets"
3305 depends on NETCONSOLE && SYSFS
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003306 select CONFIGFS_FS
3307 help
3308 This option enables the ability to dynamically reconfigure target
3309 parameters (interface, IP addresses, port numbers, MAC addresses)
3310 at runtime through a userspace interface exported using configfs.
3311 See <file:Documentation/networking/netconsole.txt> for details.
3312
Randy Dunlap54208992005-07-18 13:45:12 -07003313config NETPOLL
3314 def_bool NETCONSOLE
3315
Randy Dunlap54208992005-07-18 13:45:12 -07003316config NETPOLL_TRAP
3317 bool "Netpoll traffic trapping"
3318 default n
3319 depends on NETPOLL
3320
3321config NET_POLL_CONTROLLER
3322 def_bool NETPOLL
3323
Rusty Russell296f96f2007-10-22 11:03:37 +10003324config VIRTIO_NET
3325 tristate "Virtio network driver (EXPERIMENTAL)"
3326 depends on EXPERIMENTAL && VIRTIO
3327 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -06003328 This is the virtual network driver for virtio. It can be used with
3329 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russell296f96f2007-10-22 11:03:37 +10003330
Shreyas Bhatewarad1a890fa2009-10-13 00:15:51 -07003331config VMXNET3
3332 tristate "VMware VMXNET3 ethernet driver"
Shreyas Bhatewara115924b2009-11-16 13:41:33 +00003333 depends on PCI && INET
Shreyas Bhatewarad1a890fa2009-10-13 00:15:51 -07003334 help
3335 This driver supports VMware's vmxnet3 virtual ethernet NIC.
3336 To compile this driver as a module, choose M here: the
3337 module will be called vmxnet3.
3338
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07003339endif # NETDEVICES