blob: a2f632d0be2a2da510d2f7e430e19f157c0f0dfa [file] [log] [blame]
Arnd Bergmann2d334292012-03-07 15:04:07 +00001/*
2 * Copyright 2011 ST-Ericsson AB
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
Linus Walleij2ce05a12013-08-07 15:37:52 +020013#include "ste-dbx5x0.dtsi"
Linus Walleij83200622014-02-03 14:32:20 +010014#include "ste-href-ab8500.dtsi"
Linus Walleij3bfdebb2013-11-13 10:32:20 +010015#include "ste-href-family-pinctrl.dtsi"
Arnd Bergmann2d334292012-03-07 15:04:07 +000016
17/ {
18 model = "Calao Systems Snowball platform with device tree";
Lee Jones79b40752012-10-15 10:07:55 +010019 compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
Arnd Bergmann2d334292012-03-07 15:04:07 +000020
Arnd Bergmann2d334292012-03-07 15:04:07 +000021 memory {
22 reg = <0x00000000 0x20000000>;
23 };
24
Lee Jonesbc367482012-05-03 11:23:47 +010025 en_3v3_reg: en_3v3 {
26 compatible = "regulator-fixed";
Lee Jonesb0995762013-06-18 09:51:58 +010027 regulator-name = "en-3v3-fixed-supply";
28 regulator-min-microvolt = <3300000>;
29 regulator-max-microvolt = <3300000>;
30 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
31 gpio = <&ab8500_gpio 25 0x4>;
32 startup-delay-us = <5000>;
33 enable-active-high;
Lee Jonesbc367482012-05-03 11:23:47 +010034 };
35
Lee Jones7e0ce272012-03-15 16:46:17 +000036 gpio_keys {
37 compatible = "gpio-keys";
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 button@1 {
42 debounce_interval = <50>;
43 wakeup = <1>;
44 linux,code = <2>;
45 label = "userpb";
Lee Jones93b56982012-05-29 14:17:36 +080046 gpios = <&gpio1 0 0x4>;
Lee Jones7e0ce272012-03-15 16:46:17 +000047 };
48 button@2 {
49 debounce_interval = <50>;
50 wakeup = <1>;
51 linux,code = <3>;
Lee Jones3f3ed402012-04-13 15:05:07 +010052 label = "extkb1";
Lee Jones93b56982012-05-29 14:17:36 +080053 gpios = <&gpio4 23 0x4>;
Lee Jones7e0ce272012-03-15 16:46:17 +000054 };
55 button@3 {
56 debounce_interval = <50>;
57 wakeup = <1>;
58 linux,code = <4>;
Lee Jones3f3ed402012-04-13 15:05:07 +010059 label = "extkb2";
Lee Jones93b56982012-05-29 14:17:36 +080060 gpios = <&gpio4 24 0x4>;
Lee Jones7e0ce272012-03-15 16:46:17 +000061 };
62 button@4 {
63 debounce_interval = <50>;
64 wakeup = <1>;
65 linux,code = <5>;
Lee Jones3f3ed402012-04-13 15:05:07 +010066 label = "extkb3";
Lee Jones93b56982012-05-29 14:17:36 +080067 gpios = <&gpio5 1 0x4>;
Lee Jones7e0ce272012-03-15 16:46:17 +000068 };
69 button@5 {
70 debounce_interval = <50>;
71 wakeup = <1>;
72 linux,code = <6>;
Lee Jones3f3ed402012-04-13 15:05:07 +010073 label = "extkb4";
Lee Jones93b56982012-05-29 14:17:36 +080074 gpios = <&gpio5 2 0x4>;
Lee Jones7e0ce272012-03-15 16:46:17 +000075 };
76 };
77
78 leds {
79 compatible = "gpio-leds";
Linus Walleij2f4b84f2013-11-17 11:33:19 +010080 pinctrl-names = "default";
81 pinctrl-0 = <&gpioled_snowball_mode>;
Lee Jones7e0ce272012-03-15 16:46:17 +000082 used-led {
83 label = "user_led";
Lee Jones93b56982012-05-29 14:17:36 +080084 gpios = <&gpio4 14 0x4>;
Lee Jones7fd975f2012-06-15 09:30:30 +010085 default-state = "on";
Lee Jonesfd53d042012-05-02 09:48:38 +010086 linux,default-trigger = "heartbeat";
Lee Jones7e0ce272012-03-15 16:46:17 +000087 };
88 };
89
Gabriel Fernandezb1ba1432013-03-01 14:38:07 +010090 soc {
Linus Walleija12f7032013-11-13 15:59:40 +010091 usb_per5@a03e0000 {
92 pinctrl-names = "default", "sleep";
93 pinctrl-0 = <&musb_default_mode>;
94 pinctrl-1 = <&musb_sleep_mode>;
95 };
Lee Jonese6488062012-07-31 13:31:50 +010096
97 sound {
98 compatible = "stericsson,snd-soc-mop500";
99
100 stericsson,cpu-dai = <&msp1 &msp3>;
101 stericsson,audio-codec = <&codec>;
102 };
103
Linus Walleij70b41ab2013-11-13 14:45:06 +0100104 msp0: msp@80123000 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&msp0_default_mode>;
107 status = "okay";
108 };
109
Lee Jonesfe164522012-07-31 12:37:16 +0100110 msp1: msp@80124000 {
Linus Walleij70b41ab2013-11-13 14:45:06 +0100111 pinctrl-names = "default";
112 pinctrl-0 = <&msp1_default_mode>;
113 status = "okay";
114 };
115
116 msp2: msp@80117000 {
117 pinctrl-names = "default";
118 pinctrl-0 = <&msp2_default_mode>;
Lee Jonesfe164522012-07-31 12:37:16 +0100119 status = "okay";
120 };
121
122 msp3: msp@80125000 {
123 status = "okay";
124 };
125
Lee Jones7e0ce272012-03-15 16:46:17 +0000126 external-bus@50000000 {
Lee Jonesbf76e062012-04-24 10:53:18 +0100127 status = "okay";
Lee Jones7e0ce272012-03-15 16:46:17 +0000128
Lee Jonesbf76e062012-04-24 10:53:18 +0100129 ethernet@0 {
130 compatible = "smsc,lan9115";
131 reg = <0 0x10000>;
Linus Walleij90c40252013-05-29 19:15:39 +0200132 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
Lee Jones7e0ce272012-03-15 16:46:17 +0000133 interrupt-parent = <&gpio4>;
Lee Jonesbc367482012-05-03 11:23:47 +0100134 vdd33a-supply = <&en_3v3_reg>;
135 vddvario-supply = <&db8500_vape_reg>;
Linus Walleija48bf4b2013-11-17 10:02:22 +0100136 pinctrl-names = "default";
137 pinctrl-0 = <&eth_snowball_mode>;
Lee Jonesbc367482012-05-03 11:23:47 +0100138
Lee Jonesbf76e062012-04-24 10:53:18 +0100139 reg-shift = <1>;
140 reg-io-width = <2>;
141 smsc,force-internal-phy;
142 smsc,irq-active-high;
143 smsc,irq-push-pull;
Lee Jones7fb2afc2013-06-03 13:06:13 +0100144
145 clocks = <&prcc_pclk 3 0>;
Lee Jones7e0ce272012-03-15 16:46:17 +0000146 };
147 };
148
Lee Jones383307c2013-04-02 14:21:54 +0100149 vmmci: regulator-gpio {
Ulf Hanssona1ab5e42013-12-12 14:31:37 +0100150 gpios = <&gpio7 4 0x4>;
151 enable-gpio = <&gpio6 25 0x4>;
Lee Jones383307c2013-04-02 14:21:54 +0100152 };
153
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800154 // External Micro SD slot
Lee Jones81bf8c22012-09-26 12:55:56 +0100155 sdi0_per1@80126000 {
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800156 arm,primecell-periphid = <0x10480180>;
Linus Walleij90ccde42013-05-27 13:15:05 +0200157 max-frequency = <100000000>;
Lee Jones92a0f482012-09-26 11:12:48 +0100158 bus-width = <4>;
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800159 mmc-cap-mmc-highspeed;
Lee Jones4a85c7f2012-05-29 14:29:53 +0800160 vmmc-supply = <&ab8500_ldo_aux3_reg>;
Lee Jones383307c2013-04-02 14:21:54 +0100161 vqmmc-supply = <&vmmci>;
Linus Walleij1e662352013-11-13 13:46:57 +0100162 pinctrl-names = "default", "sleep";
163 pinctrl-0 = <&sdi0_default_mode>;
164 pinctrl-1 = <&sdi0_sleep_mode>;
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800165
Lee Jones93b56982012-05-29 14:17:36 +0800166 cd-gpios = <&gpio6 26 0x4>; // 218
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800167 cd-inverted;
168
169 status = "okay";
Lee Jones7e0ce272012-03-15 16:46:17 +0000170 };
171
Linus Walleij1e662352013-11-13 13:46:57 +0100172 // WLAN SDIO channel
173 sdi1_per2@80118000 {
174 arm,primecell-periphid = <0x10480180>;
175 max-frequency = <100000000>;
176 bus-width = <4>;
177 pinctrl-names = "default", "sleep";
178 pinctrl-0 = <&sdi1_default_mode>;
179 pinctrl-1 = <&sdi1_sleep_mode>;
180
181 status = "okay";
182 };
183
184 // Unused PoP eMMC - register and put it to sleep by default */
185 sdi2_per3@80005000 {
186 arm,primecell-periphid = <0x10480180>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&sdi2_sleep_mode>;
189
190 status = "okay";
191 };
192
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800193 // On-board eMMC
Lee Jones81bf8c22012-09-26 12:55:56 +0100194 sdi4_per2@80114000 {
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800195 arm,primecell-periphid = <0x10480180>;
Linus Walleij90ccde42013-05-27 13:15:05 +0200196 max-frequency = <100000000>;
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800197 bus-width = <8>;
198 mmc-cap-mmc-highspeed;
Lee Jones4a85c7f2012-05-29 14:29:53 +0800199 vmmc-supply = <&ab8500_ldo_aux2_reg>;
Linus Walleij1e662352013-11-13 13:46:57 +0100200 pinctrl-names = "default", "sleep";
201 pinctrl-0 = <&sdi4_default_mode>;
202 pinctrl-1 = <&sdi4_sleep_mode>;
Lee Jones5e1ac7d2012-05-29 14:40:04 +0800203
204 status = "okay";
Lee Jones7e0ce272012-03-15 16:46:17 +0000205 };
206
Lee Jones4905af02012-03-07 17:35:04 +0000207 uart@80120000 {
Linus Walleij3bfdebb2013-11-13 10:32:20 +0100208 pinctrl-names = "default", "sleep";
209 pinctrl-0 = <&uart0_default_mode>;
210 pinctrl-1 = <&uart0_sleep_mode>;
Lee Jones4905af02012-03-07 17:35:04 +0000211 status = "okay";
212 };
213
214 uart@80121000 {
Linus Walleij3bfdebb2013-11-13 10:32:20 +0100215 pinctrl-names = "default", "sleep";
216 pinctrl-0 = <&uart1_default_mode>;
217 pinctrl-1 = <&uart1_sleep_mode>;
Lee Jones4905af02012-03-07 17:35:04 +0000218 status = "okay";
219 };
220
221 uart@80007000 {
Linus Walleij3bfdebb2013-11-13 10:32:20 +0100222 pinctrl-names = "default", "sleep";
223 pinctrl-0 = <&uart2_default_mode>;
224 pinctrl-1 = <&uart2_sleep_mode>;
Lee Jones4905af02012-03-07 17:35:04 +0000225 status = "okay";
226 };
227
Linus Walleij96fee132013-11-13 11:10:07 +0100228 i2c@80004000 {
229 pinctrl-names = "default","sleep";
230 pinctrl-0 = <&i2c0_default_mode>;
231 pinctrl-1 = <&i2c0_sleep_mode>;
232 };
233
234 i2c@80122000 {
235 pinctrl-names = "default","sleep";
236 pinctrl-0 = <&i2c1_default_mode>;
237 pinctrl-1 = <&i2c1_sleep_mode>;
238 };
239
240 i2c@80128000 {
241 pinctrl-names = "default","sleep";
242 pinctrl-0 = <&i2c2_default_mode>;
243 pinctrl-1 = <&i2c2_sleep_mode>;
244 };
245
246 i2c@80110000 {
247 pinctrl-names = "default","sleep";
248 pinctrl-0 = <&i2c3_default_mode>;
249 pinctrl-1 = <&i2c3_sleep_mode>;
250 };
251
Linus Walleijfd8f9ea2013-11-17 11:13:21 +0100252 ssp@80002000 {
253 pinctrl-names = "default";
254 pinctrl-0 = <&ssp0_snowball_mode>;
255 };
256
hongbo.zhangdc1956b2012-11-15 18:56:43 +0800257 cpufreq-cooling {
258 status = "okay";
259 };
Linus Torvaldsdb5b0ae2012-12-13 10:39:26 -0800260
Lee Jones809efa52012-09-25 12:04:51 +0100261 prcmu@80157000 {
Lee Jones6cb7ea92013-09-18 16:03:07 +0100262 cpufreq {
263 status = "okay";
264 };
265
Lee Jones6c1d25b2013-04-02 14:21:51 +0100266 thermal@801573c0 {
267 num-trips = <4>;
268
269 trip0-temp = <70000>;
270 trip0-type = "active";
271 trip0-cdev-num = <1>;
272 trip0-cdev-name0 = "thermal-cpufreq-0";
273
274 trip1-temp = <75000>;
275 trip1-type = "active";
276 trip1-cdev-num = <1>;
277 trip1-cdev-name0 = "thermal-cpufreq-0";
278
279 trip2-temp = <80000>;
280 trip2-type = "active";
281 trip2-cdev-num = <1>;
282 trip2-cdev-name0 = "thermal-cpufreq-0";
283
284 trip3-temp = <85000>;
285 trip3-type = "critical";
286 trip3-cdev-num = <0>;
287
288 status = "okay";
289 };
290
Arnd Bergmannd52701d32013-03-12 09:39:01 +0100291 ab8500 {
Lee Jones924e82d2013-01-16 14:28:03 +0000292 ab8500-gpio {
293 compatible = "stericsson,ab8500-gpio";
294 };
295
Lee Jonesb0c8fad2013-06-07 17:11:21 +0100296 ext_regulators: ab8500-ext-regulators {
297 ab8500_ext1_reg: ab8500_ext1 {
298 regulator-name = "ab8500-ext-supply1";
299 };
300
301 ab8500_ext2_reg_reg: ab8500_ext2 {
302 regulator-name = "ab8500-ext-supply2";
303 };
304
305 ab8500_ext3_reg_reg: ab8500_ext3 {
306 regulator-name = "ab8500-ext-supply3";
307 };
308 };
309
Lee Jones809efa52012-09-25 12:04:51 +0100310 ab8500-regulators {
311 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
312 regulator-name = "V-DISPLAY";
313 };
314
315 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
316 regulator-name = "V-eMMC1";
317 };
318
319 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
320 regulator-name = "V-MMC-SD";
321 };
322
Fabio Baltieri99b38ee2013-04-09 11:16:56 +0200323 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
Lee Jones809efa52012-09-25 12:04:51 +0100324 regulator-name = "V-INTCORE";
325 };
326
327 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
328 regulator-name = "V-TVOUT";
329 };
330
331 ab8500_ldo_usb_reg: ab8500_ldo_usb {
332 regulator-name = "dummy";
333 };
334
335 ab8500_ldo_audio_reg: ab8500_ldo_audio {
336 regulator-name = "V-AUD";
337 };
338
339 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
340 regulator-name = "V-AMIC1";
341 };
342
Fabio Baltieri5510ed92013-05-30 15:27:42 +0200343 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
Lee Jones809efa52012-09-25 12:04:51 +0100344 regulator-name = "V-AMIC2";
345 };
346
347 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
348 regulator-name = "V-DMIC";
349 };
350
351 ab8500_ldo_ana_reg: ab8500_ldo_ana {
352 regulator-name = "V-CSI/DSI";
353 };
354 };
355 };
356 };
Linus Walleij1e662352013-11-13 13:46:57 +0100357
358 pinctrl {
Linus Walleij4d4629f2013-11-17 11:52:32 +0100359 /*
360 * Set this up using hogs, as time goes by and as seems fit, these
361 * can be moved over to being controlled by respective device.
362 */
363 pinctrl-names = "default";
364 pinctrl-0 = <&accel_snowball_mode>,
365 <&magneto_snowball_mode>,
366 <&gbf_snowball_mode>,
367 <&wlan_snowball_mode>;
368
Linus Walleija48bf4b2013-11-17 10:02:22 +0100369 ethernet {
370 /*
371 * Mux in "SM" which is used for the
372 * SMSC911x Ethernet adapter
373 */
374 eth_snowball_mode: eth_snowball {
375 snowball_mux {
376 ste,function = "sm";
377 ste,pins = "sm_b_1";
378 };
379 /* LAN IRQ pin */
380 snowball_cfg1 {
381 ste,pins = "GPIO140_B11";
382 ste,config = <&in_nopull>;
383 };
384 /* LAN reset pin */
385 snowball_cfg2 {
386 ste,pins = "GPIO141_C12";
387 ste,config = <&gpio_out_hi>;
388 };
389
390 };
391 };
Linus Walleij1e662352013-11-13 13:46:57 +0100392 sdi0 {
393 sdi0_default_mode: sdi0_default {
394 snowball_mux {
395 ste,function = "mc0";
396 ste,pins = "mc0dat31dir_a_1";
397 };
398 snowball_cfg1 {
399 ste,pins = "GPIO21_AB3"; /* DAT31DIR */
400 ste,config = <&out_hi>;
401 };
402
403 };
404 };
Linus Walleijfd8f9ea2013-11-17 11:13:21 +0100405 ssp0 {
406 ssp0_snowball_mode: ssp0_snowball_default {
407 snowball_mux {
408 ste,function = "ssp0";
409 ste,pins = "ssp0_a_1";
410 };
411 snowball_cfg1 {
412 ste,pins = "GPIO144_B13"; /* FRM */
413 ste,config = <&gpio_out_hi>;
414 };
415 snowball_cfg2 {
416 ste,pins = "GPIO145_C13"; /* RXD */
417 ste,config = <&in_pd>;
418 };
419 snowball_cfg3 {
420 ste,pins =
421 "GPIO146_D13", /* TXD */
422 "GPIO143_D12"; /* CLK */
423 ste,config = <&out_lo>;
424 };
425
426 };
427 };
Linus Walleij2f4b84f2013-11-17 11:33:19 +0100428 gpio_led {
429 gpioled_snowball_mode: gpioled_default {
430 snowball_cfg1 {
431 ste,pins = "GPIO142_C11";
432 ste,config = <&gpio_out_hi>;
433 };
434
435 };
436 };
Linus Walleij4d4629f2013-11-17 11:52:32 +0100437 accelerometer {
438 accel_snowball_mode: accel_snowball {
439 /* Accelerometer lines */
440 snowball_cfg1 {
441 ste,pins =
442 "GPIO163_C20", /* ACCEL_IRQ1 */
443 "GPIO164_B21"; /* ACCEL_IRQ2 */
444 ste,config = <&gpio_in_pu>;
445 };
446 };
447 };
448 magnetometer {
449 magneto_snowball_mode: magneto_snowball {
450 snowball_cfg1 {
451 ste,pins = "GPIO165_C21"; /* MAG_DRDY */
452 ste,config = <&gpio_in_pu>;
453 };
454 };
455 };
456 gbf {
457 gbf_snowball_mode: gbf_snowball {
458 /*
459 * GBF (GPS, Bluetooth, FM-radio) interface,
460 * pull low to reset state
461 */
462 snowball_cfg1 {
463 ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
464 ste,config = <&gpio_out_lo>;
465 };
466 };
467 };
468 wlan {
469 wlan_snowball_mode: wlan_snowball {
470 /*
471 * Activate this mode with the WLAN chip.
472 * These are plain GPIO pins used by WLAN
473 */
474 snowball_cfg1 {
475 ste,pins =
476 "GPIO161_D21", /* WLAN_PMU_EN */
477 "GPIO215_AH13"; /* WLAN_ENA */
478 ste,config = <&gpio_out_lo>;
479 };
480 snowball_cfg2 {
481 ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
482 ste,config = <&gpio_in_pu>;
483 };
484 };
485 };
Linus Walleij1e662352013-11-13 13:46:57 +0100486 };
Linus Walleij817a5b92013-11-14 15:23:20 +0100487
488 mcde@a0350000 {
489 pinctrl-names = "default", "sleep";
490 pinctrl-0 = <&lcd_default_mode>;
491 pinctrl-1 = <&lcd_sleep_mode>;
492 };
Arnd Bergmann2d334292012-03-07 15:04:07 +0000493 };
494};