blob: 2ff798744c1d6eba3bd71a99f3875cdc71f26888 [file] [log] [blame]
Kumar Gala33d71d22007-08-20 08:50:28 -05001/*
2 * MPC8xx Communication Processor Module.
3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
4 *
5 * This file contains structures and information for the communication
6 * processor channels. Some CPM control and status is available
7 * throught the MPC8xx internal memory map. See immap.h for details.
8 * This file only contains what I need for the moment, not the total
9 * CPM capabilities. I (or someone else) will add definitions as they
10 * are needed. -- Dan
11 *
12 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
13 * bytes of the DP RAM and relocates the I2C parameter area to the
14 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
15 * or other use.
16 */
Jochen Friedrichb5677d82008-01-25 15:31:42 +010017#ifndef __CPM1__
18#define __CPM1__
Kumar Gala33d71d22007-08-20 08:50:28 -050019
20#include <asm/8xx_immap.h>
21#include <asm/ptrace.h>
Scott Wood15f8c602007-09-28 14:06:16 -050022#include <asm/cpm.h>
Kumar Gala33d71d22007-08-20 08:50:28 -050023
24/* CPM Command register.
25*/
26#define CPM_CR_RST ((ushort)0x8000)
27#define CPM_CR_OPCODE ((ushort)0x0f00)
28#define CPM_CR_CHAN ((ushort)0x00f0)
29#define CPM_CR_FLG ((ushort)0x0001)
30
Kumar Gala33d71d22007-08-20 08:50:28 -050031/* Channel numbers.
32*/
33#define CPM_CR_CH_SCC1 ((ushort)0x0000)
34#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
35#define CPM_CR_CH_SCC2 ((ushort)0x0004)
36#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
37#define CPM_CR_CH_TIMER CPM_CR_CH_SPI
38#define CPM_CR_CH_SCC3 ((ushort)0x0008)
39#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
40#define CPM_CR_CH_SCC4 ((ushort)0x000c)
41#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
42
43#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
44
Kumar Gala33d71d22007-08-20 08:50:28 -050045/* Export the base address of the communication processor registers
46 * and dual port ram.
47 */
Scott Woodfb533d02007-09-14 14:22:36 -050048extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
Scott Wood15f8c602007-09-28 14:06:16 -050049
Scott Wood15f8c602007-09-28 14:06:16 -050050#define cpm_dpalloc cpm_muram_alloc
51#define cpm_dpfree cpm_muram_free
52#define cpm_dpram_addr cpm_muram_addr
53#define cpm_dpram_phys cpm_muram_dma
Scott Wood15f8c602007-09-28 14:06:16 -050054
Kumar Gala33d71d22007-08-20 08:50:28 -050055extern void cpm_setbrg(uint brg, uint rate);
56
Kamalesh Babulal4d208262007-11-05 16:11:12 +053057extern void cpm_load_patch(cpm8xx_t *cp);
Kumar Gala33d71d22007-08-20 08:50:28 -050058
Jochen Friedrich49b51542008-01-24 16:18:32 +010059extern void cpm_reset(void);
60
Kumar Gala33d71d22007-08-20 08:50:28 -050061/* Parameter RAM offsets.
62*/
63#define PROFF_SCC1 ((uint)0x0000)
64#define PROFF_IIC ((uint)0x0080)
65#define PROFF_SCC2 ((uint)0x0100)
66#define PROFF_SPI ((uint)0x0180)
67#define PROFF_SCC3 ((uint)0x0200)
68#define PROFF_SMC1 ((uint)0x0280)
69#define PROFF_SCC4 ((uint)0x0300)
70#define PROFF_SMC2 ((uint)0x0380)
71
72/* Define enough so I can at least use the serial port as a UART.
73 * The MBX uses SMC1 as the host serial port.
74 */
75typedef struct smc_uart {
76 ushort smc_rbase; /* Rx Buffer descriptor base address */
77 ushort smc_tbase; /* Tx Buffer descriptor base address */
78 u_char smc_rfcr; /* Rx function code */
79 u_char smc_tfcr; /* Tx function code */
80 ushort smc_mrblr; /* Max receive buffer length */
81 uint smc_rstate; /* Internal */
82 uint smc_idp; /* Internal */
83 ushort smc_rbptr; /* Internal */
84 ushort smc_ibc; /* Internal */
85 uint smc_rxtmp; /* Internal */
86 uint smc_tstate; /* Internal */
87 uint smc_tdp; /* Internal */
88 ushort smc_tbptr; /* Internal */
89 ushort smc_tbc; /* Internal */
90 uint smc_txtmp; /* Internal */
91 ushort smc_maxidl; /* Maximum idle characters */
92 ushort smc_tmpidl; /* Temporary idle counter */
93 ushort smc_brklen; /* Last received break length */
94 ushort smc_brkec; /* rcv'd break condition counter */
95 ushort smc_brkcr; /* xmt break count register */
96 ushort smc_rmask; /* Temporary bit mask */
97 char res1[8]; /* Reserved */
98 ushort smc_rpbase; /* Relocation pointer */
99} smc_uart_t;
100
101/* Function code bits.
102*/
103#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
104
105/* SMC uart mode register.
106*/
107#define SMCMR_REN ((ushort)0x0001)
108#define SMCMR_TEN ((ushort)0x0002)
109#define SMCMR_DM ((ushort)0x000c)
110#define SMCMR_SM_GCI ((ushort)0x0000)
111#define SMCMR_SM_UART ((ushort)0x0020)
112#define SMCMR_SM_TRANS ((ushort)0x0030)
113#define SMCMR_SM_MASK ((ushort)0x0030)
114#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
115#define SMCMR_REVD SMCMR_PM_EVEN
116#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
117#define SMCMR_BS SMCMR_PEN
118#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
119#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
120#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
121
122/* SMC2 as Centronics parallel printer. It is half duplex, in that
123 * it can only receive or transmit. The parameter ram values for
124 * each direction are either unique or properly overlap, so we can
125 * include them in one structure.
126 */
127typedef struct smc_centronics {
128 ushort scent_rbase;
129 ushort scent_tbase;
130 u_char scent_cfcr;
131 u_char scent_smask;
132 ushort scent_mrblr;
133 uint scent_rstate;
134 uint scent_r_ptr;
135 ushort scent_rbptr;
136 ushort scent_r_cnt;
137 uint scent_rtemp;
138 uint scent_tstate;
139 uint scent_t_ptr;
140 ushort scent_tbptr;
141 ushort scent_t_cnt;
142 uint scent_ttemp;
143 ushort scent_max_sl;
144 ushort scent_sl_cnt;
145 ushort scent_character1;
146 ushort scent_character2;
147 ushort scent_character3;
148 ushort scent_character4;
149 ushort scent_character5;
150 ushort scent_character6;
151 ushort scent_character7;
152 ushort scent_character8;
153 ushort scent_rccm;
154 ushort scent_rccr;
155} smc_cent_t;
156
157/* Centronics Status Mask Register.
158*/
159#define SMC_CENT_F ((u_char)0x08)
160#define SMC_CENT_PE ((u_char)0x04)
161#define SMC_CENT_S ((u_char)0x02)
162
163/* SMC Event and Mask register.
164*/
165#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
166#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
167#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
168#define SMCM_BSY ((unsigned char)0x04)
169#define SMCM_TX ((unsigned char)0x02)
170#define SMCM_RX ((unsigned char)0x01)
171
172/* Baud rate generators.
173*/
174#define CPM_BRG_RST ((uint)0x00020000)
175#define CPM_BRG_EN ((uint)0x00010000)
176#define CPM_BRG_EXTC_INT ((uint)0x00000000)
177#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
178#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
179#define CPM_BRG_ATB ((uint)0x00002000)
180#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
181#define CPM_BRG_DIV16 ((uint)0x00000001)
182
183/* SI Clock Route Register
184*/
185#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
186#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
187#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
188#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
189#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
190#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
191#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
192#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
193
194/* SCCs.
195*/
196#define SCC_GSMRH_IRP ((uint)0x00040000)
197#define SCC_GSMRH_GDE ((uint)0x00010000)
198#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
199#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
200#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
201#define SCC_GSMRH_REVD ((uint)0x00002000)
202#define SCC_GSMRH_TRX ((uint)0x00001000)
203#define SCC_GSMRH_TTX ((uint)0x00000800)
204#define SCC_GSMRH_CDP ((uint)0x00000400)
205#define SCC_GSMRH_CTSP ((uint)0x00000200)
206#define SCC_GSMRH_CDS ((uint)0x00000100)
207#define SCC_GSMRH_CTSS ((uint)0x00000080)
208#define SCC_GSMRH_TFL ((uint)0x00000040)
209#define SCC_GSMRH_RFW ((uint)0x00000020)
210#define SCC_GSMRH_TXSY ((uint)0x00000010)
211#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
212#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
213#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
214#define SCC_GSMRH_RTSM ((uint)0x00000002)
215#define SCC_GSMRH_RSYN ((uint)0x00000001)
216
217#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
218#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
219#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
220#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
221#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
222#define SCC_GSMRL_TCI ((uint)0x10000000)
223#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
224#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
225#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
226#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
227#define SCC_GSMRL_RINV ((uint)0x02000000)
228#define SCC_GSMRL_TINV ((uint)0x01000000)
229#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
230#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
231#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
232#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
233#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
234#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
235#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
236#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
237#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
238#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
239#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
240#define SCC_GSMRL_TEND ((uint)0x00040000)
241#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
242#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
243#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
244#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
245#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
246#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
247#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
248#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
249#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
250#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
251#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
252#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
253#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
254#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
255#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
256#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
257#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
258#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
259#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
260#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
261#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
262#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
263#define SCC_GSMRL_ENR ((uint)0x00000020)
264#define SCC_GSMRL_ENT ((uint)0x00000010)
265#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
266#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
267#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
268#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
269#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
270#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
271#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
272#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
273#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
274#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
275#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
276
277#define SCC_TODR_TOD ((ushort)0x8000)
278
279/* SCC Event and Mask register.
280*/
281#define SCCM_TXE ((unsigned char)0x10)
282#define SCCM_BSY ((unsigned char)0x04)
283#define SCCM_TX ((unsigned char)0x02)
284#define SCCM_RX ((unsigned char)0x01)
285
286typedef struct scc_param {
287 ushort scc_rbase; /* Rx Buffer descriptor base address */
288 ushort scc_tbase; /* Tx Buffer descriptor base address */
289 u_char scc_rfcr; /* Rx function code */
290 u_char scc_tfcr; /* Tx function code */
291 ushort scc_mrblr; /* Max receive buffer length */
292 uint scc_rstate; /* Internal */
293 uint scc_idp; /* Internal */
294 ushort scc_rbptr; /* Internal */
295 ushort scc_ibc; /* Internal */
296 uint scc_rxtmp; /* Internal */
297 uint scc_tstate; /* Internal */
298 uint scc_tdp; /* Internal */
299 ushort scc_tbptr; /* Internal */
300 ushort scc_tbc; /* Internal */
301 uint scc_txtmp; /* Internal */
302 uint scc_rcrc; /* Internal */
303 uint scc_tcrc; /* Internal */
304} sccp_t;
305
306/* Function code bits.
307*/
308#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
309
310/* CPM Ethernet through SCCx.
311 */
312typedef struct scc_enet {
313 sccp_t sen_genscc;
314 uint sen_cpres; /* Preset CRC */
315 uint sen_cmask; /* Constant mask for CRC */
316 uint sen_crcec; /* CRC Error counter */
317 uint sen_alec; /* alignment error counter */
318 uint sen_disfc; /* discard frame counter */
319 ushort sen_pads; /* Tx short frame pad character */
320 ushort sen_retlim; /* Retry limit threshold */
321 ushort sen_retcnt; /* Retry limit counter */
322 ushort sen_maxflr; /* maximum frame length register */
323 ushort sen_minflr; /* minimum frame length register */
324 ushort sen_maxd1; /* maximum DMA1 length */
325 ushort sen_maxd2; /* maximum DMA2 length */
326 ushort sen_maxd; /* Rx max DMA */
327 ushort sen_dmacnt; /* Rx DMA counter */
328 ushort sen_maxb; /* Max BD byte count */
329 ushort sen_gaddr1; /* Group address filter */
330 ushort sen_gaddr2;
331 ushort sen_gaddr3;
332 ushort sen_gaddr4;
333 uint sen_tbuf0data0; /* Save area 0 - current frame */
334 uint sen_tbuf0data1; /* Save area 1 - current frame */
335 uint sen_tbuf0rba; /* Internal */
336 uint sen_tbuf0crc; /* Internal */
337 ushort sen_tbuf0bcnt; /* Internal */
338 ushort sen_paddrh; /* physical address (MSB) */
339 ushort sen_paddrm;
340 ushort sen_paddrl; /* physical address (LSB) */
341 ushort sen_pper; /* persistence */
342 ushort sen_rfbdptr; /* Rx first BD pointer */
343 ushort sen_tfbdptr; /* Tx first BD pointer */
344 ushort sen_tlbdptr; /* Tx last BD pointer */
345 uint sen_tbuf1data0; /* Save area 0 - current frame */
346 uint sen_tbuf1data1; /* Save area 1 - current frame */
347 uint sen_tbuf1rba; /* Internal */
348 uint sen_tbuf1crc; /* Internal */
349 ushort sen_tbuf1bcnt; /* Internal */
350 ushort sen_txlen; /* Tx Frame length counter */
351 ushort sen_iaddr1; /* Individual address filter */
352 ushort sen_iaddr2;
353 ushort sen_iaddr3;
354 ushort sen_iaddr4;
355 ushort sen_boffcnt; /* Backoff counter */
356
357 /* NOTE: Some versions of the manual have the following items
358 * incorrectly documented. Below is the proper order.
359 */
360 ushort sen_taddrh; /* temp address (MSB) */
361 ushort sen_taddrm;
362 ushort sen_taddrl; /* temp address (LSB) */
363} scc_enet_t;
364
365/* SCC Event register as used by Ethernet.
366*/
367#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
368#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
369#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
370#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
371#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
372#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
373
374/* SCC Mode Register (PMSR) as used by Ethernet.
375*/
376#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
377#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
378#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
379#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
380#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
381#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
382#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
383#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
384#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
385#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
386#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
387#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
388#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
389
Kumar Gala33d71d22007-08-20 08:50:28 -0500390/* SCC as UART
391*/
392typedef struct scc_uart {
393 sccp_t scc_genscc;
394 char res1[8]; /* Reserved */
395 ushort scc_maxidl; /* Maximum idle chars */
396 ushort scc_idlc; /* temp idle counter */
397 ushort scc_brkcr; /* Break count register */
398 ushort scc_parec; /* receive parity error counter */
399 ushort scc_frmec; /* receive framing error counter */
400 ushort scc_nosec; /* receive noise counter */
401 ushort scc_brkec; /* receive break condition counter */
402 ushort scc_brkln; /* last received break length */
403 ushort scc_uaddr1; /* UART address character 1 */
404 ushort scc_uaddr2; /* UART address character 2 */
405 ushort scc_rtemp; /* Temp storage */
406 ushort scc_toseq; /* Transmit out of sequence char */
407 ushort scc_char1; /* control character 1 */
408 ushort scc_char2; /* control character 2 */
409 ushort scc_char3; /* control character 3 */
410 ushort scc_char4; /* control character 4 */
411 ushort scc_char5; /* control character 5 */
412 ushort scc_char6; /* control character 6 */
413 ushort scc_char7; /* control character 7 */
414 ushort scc_char8; /* control character 8 */
415 ushort scc_rccm; /* receive control character mask */
416 ushort scc_rccr; /* receive control character register */
417 ushort scc_rlbc; /* receive last break character */
418} scc_uart_t;
419
420/* SCC Event and Mask registers when it is used as a UART.
421*/
422#define UART_SCCM_GLR ((ushort)0x1000)
423#define UART_SCCM_GLT ((ushort)0x0800)
424#define UART_SCCM_AB ((ushort)0x0200)
425#define UART_SCCM_IDL ((ushort)0x0100)
426#define UART_SCCM_GRA ((ushort)0x0080)
427#define UART_SCCM_BRKE ((ushort)0x0040)
428#define UART_SCCM_BRKS ((ushort)0x0020)
429#define UART_SCCM_CCR ((ushort)0x0008)
430#define UART_SCCM_BSY ((ushort)0x0004)
431#define UART_SCCM_TX ((ushort)0x0002)
432#define UART_SCCM_RX ((ushort)0x0001)
433
434/* The SCC PMSR when used as a UART.
435*/
436#define SCU_PSMR_FLC ((ushort)0x8000)
437#define SCU_PSMR_SL ((ushort)0x4000)
438#define SCU_PSMR_CL ((ushort)0x3000)
439#define SCU_PSMR_UM ((ushort)0x0c00)
440#define SCU_PSMR_FRZ ((ushort)0x0200)
441#define SCU_PSMR_RZS ((ushort)0x0100)
442#define SCU_PSMR_SYN ((ushort)0x0080)
443#define SCU_PSMR_DRT ((ushort)0x0040)
444#define SCU_PSMR_PEN ((ushort)0x0010)
445#define SCU_PSMR_RPM ((ushort)0x000c)
446#define SCU_PSMR_REVP ((ushort)0x0008)
447#define SCU_PSMR_TPM ((ushort)0x0003)
448#define SCU_PSMR_TEVP ((ushort)0x0002)
449
450/* CPM Transparent mode SCC.
451 */
452typedef struct scc_trans {
453 sccp_t st_genscc;
454 uint st_cpres; /* Preset CRC */
455 uint st_cmask; /* Constant mask for CRC */
456} scc_trans_t;
457
Kumar Gala33d71d22007-08-20 08:50:28 -0500458/* IIC parameter RAM.
459*/
460typedef struct iic {
461 ushort iic_rbase; /* Rx Buffer descriptor base address */
462 ushort iic_tbase; /* Tx Buffer descriptor base address */
463 u_char iic_rfcr; /* Rx function code */
464 u_char iic_tfcr; /* Tx function code */
465 ushort iic_mrblr; /* Max receive buffer length */
466 uint iic_rstate; /* Internal */
467 uint iic_rdp; /* Internal */
468 ushort iic_rbptr; /* Internal */
469 ushort iic_rbc; /* Internal */
470 uint iic_rxtmp; /* Internal */
471 uint iic_tstate; /* Internal */
472 uint iic_tdp; /* Internal */
473 ushort iic_tbptr; /* Internal */
474 ushort iic_tbc; /* Internal */
475 uint iic_txtmp; /* Internal */
476 char res1[4]; /* Reserved */
477 ushort iic_rpbase; /* Relocation pointer */
478 char res2[2]; /* Reserved */
479} iic_t;
480
Kumar Gala33d71d22007-08-20 08:50:28 -0500481/* SPI parameter RAM.
482*/
483typedef struct spi {
484 ushort spi_rbase; /* Rx Buffer descriptor base address */
485 ushort spi_tbase; /* Tx Buffer descriptor base address */
486 u_char spi_rfcr; /* Rx function code */
487 u_char spi_tfcr; /* Tx function code */
488 ushort spi_mrblr; /* Max receive buffer length */
489 uint spi_rstate; /* Internal */
490 uint spi_rdp; /* Internal */
491 ushort spi_rbptr; /* Internal */
492 ushort spi_rbc; /* Internal */
493 uint spi_rxtmp; /* Internal */
494 uint spi_tstate; /* Internal */
495 uint spi_tdp; /* Internal */
496 ushort spi_tbptr; /* Internal */
497 ushort spi_tbc; /* Internal */
498 uint spi_txtmp; /* Internal */
499 uint spi_res;
500 ushort spi_rpbase; /* Relocation pointer */
501 ushort spi_res2;
502} spi_t;
503
504/* SPI Mode register.
505*/
506#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
507#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
508#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
509#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
510#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
511#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
512#define SPMODE_EN ((ushort)0x0100) /* Enable */
513#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
514#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
515#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
516#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
517#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
518
519/* SPIE fields */
520#define SPIE_MME 0x20
521#define SPIE_TXE 0x10
522#define SPIE_BSY 0x04
523#define SPIE_TXB 0x02
524#define SPIE_RXB 0x01
525
526/*
527 * RISC Controller Configuration Register definitons
528 */
529#define RCCR_TIME 0x8000 /* RISC Timer Enable */
530#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
531#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
532
533/* RISC Timer Parameter RAM offset */
534#define PROFF_RTMR ((uint)0x01B0)
535
536typedef struct risc_timer_pram {
537 unsigned short tm_base; /* RISC Timer Table Base Address */
538 unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */
539 unsigned short r_tmr; /* RISC Timer Mode Register */
540 unsigned short r_tmv; /* RISC Timer Valid Register */
541 unsigned long tm_cmd; /* RISC Timer Command Register */
542 unsigned long tm_cnt; /* RISC Timer Internal Count */
543} rt_pram_t;
544
545/* Bits in RISC Timer Command Register */
546#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
547#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
548#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
549#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
550#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
551
552/* CPM interrupts. There are nearly 32 interrupts generated by CPM
553 * channels or devices. All of these are presented to the PPC core
554 * as a single interrupt. The CPM interrupt handler dispatches its
555 * own handlers, in a similar fashion to the PPC core handler. We
556 * use the table as defined in the manuals (i.e. no special high
557 * priority and SCC1 == SCCa, etc...).
558 */
559#define CPMVEC_NR 32
560#define CPMVEC_PIO_PC15 ((ushort)0x1f)
561#define CPMVEC_SCC1 ((ushort)0x1e)
562#define CPMVEC_SCC2 ((ushort)0x1d)
563#define CPMVEC_SCC3 ((ushort)0x1c)
564#define CPMVEC_SCC4 ((ushort)0x1b)
565#define CPMVEC_PIO_PC14 ((ushort)0x1a)
566#define CPMVEC_TIMER1 ((ushort)0x19)
567#define CPMVEC_PIO_PC13 ((ushort)0x18)
568#define CPMVEC_PIO_PC12 ((ushort)0x17)
569#define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
570#define CPMVEC_IDMA1 ((ushort)0x15)
571#define CPMVEC_IDMA2 ((ushort)0x14)
572#define CPMVEC_TIMER2 ((ushort)0x12)
573#define CPMVEC_RISCTIMER ((ushort)0x11)
574#define CPMVEC_I2C ((ushort)0x10)
575#define CPMVEC_PIO_PC11 ((ushort)0x0f)
576#define CPMVEC_PIO_PC10 ((ushort)0x0e)
577#define CPMVEC_TIMER3 ((ushort)0x0c)
578#define CPMVEC_PIO_PC9 ((ushort)0x0b)
579#define CPMVEC_PIO_PC8 ((ushort)0x0a)
580#define CPMVEC_PIO_PC7 ((ushort)0x09)
581#define CPMVEC_TIMER4 ((ushort)0x07)
582#define CPMVEC_PIO_PC6 ((ushort)0x06)
583#define CPMVEC_SPI ((ushort)0x05)
584#define CPMVEC_SMC1 ((ushort)0x04)
585#define CPMVEC_SMC2 ((ushort)0x03)
586#define CPMVEC_PIO_PC5 ((ushort)0x02)
587#define CPMVEC_PIO_PC4 ((ushort)0x01)
588#define CPMVEC_ERROR ((ushort)0x00)
589
590/* CPM interrupt configuration vector.
591*/
592#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
593#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
594#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
595#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
joe@perches.com567e9fd2007-12-18 06:30:13 +1100596#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
Kumar Gala33d71d22007-08-20 08:50:28 -0500597#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
598#define CICR_IEN ((uint)0x00000080) /* Int. enable */
599#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
600
Scott Woodfb533d02007-09-14 14:22:36 -0500601#define IMAP_ADDR (get_immrbase())
602
Scott Wood663edbd2007-07-16 17:22:01 -0500603#define CPM_PIN_INPUT 0
604#define CPM_PIN_OUTPUT 1
605#define CPM_PIN_PRIMARY 0
606#define CPM_PIN_SECONDARY 2
607#define CPM_PIN_GPIO 4
608#define CPM_PIN_OPENDRAIN 8
609
610enum cpm_port {
611 CPM_PORTA,
612 CPM_PORTB,
613 CPM_PORTC,
614 CPM_PORTD,
615 CPM_PORTE,
616};
617
618void cpm1_set_pin(enum cpm_port port, int pin, int flags);
619
620enum cpm_clk_dir {
621 CPM_CLK_RX,
622 CPM_CLK_TX,
623 CPM_CLK_RTX
624};
625
626enum cpm_clk_target {
627 CPM_CLK_SCC1,
628 CPM_CLK_SCC2,
629 CPM_CLK_SCC3,
630 CPM_CLK_SCC4,
631 CPM_CLK_SMC1,
632 CPM_CLK_SMC2,
633};
634
635enum cpm_clk {
636 CPM_BRG1, /* Baud Rate Generator 1 */
637 CPM_BRG2, /* Baud Rate Generator 2 */
638 CPM_BRG3, /* Baud Rate Generator 3 */
639 CPM_BRG4, /* Baud Rate Generator 4 */
640 CPM_CLK1, /* Clock 1 */
641 CPM_CLK2, /* Clock 2 */
642 CPM_CLK3, /* Clock 3 */
643 CPM_CLK4, /* Clock 4 */
644 CPM_CLK5, /* Clock 5 */
645 CPM_CLK6, /* Clock 6 */
646 CPM_CLK7, /* Clock 7 */
647 CPM_CLK8, /* Clock 8 */
648};
649
650int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
651
Jochen Friedrichb5677d82008-01-25 15:31:42 +0100652#endif /* __CPM1__ */