blob: aeb02bcf7233a3d1d4383bfd14de04a6d9630d75 [file] [log] [blame]
Phil Sutterd9bdffd2009-03-04 23:27:15 -08001/*
2 * Support for the S1 button on Routerboard 532
3 *
4 * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org>
5 */
6
7#include <linux/input-polldev.h>
8#include <linux/module.h>
9#include <linux/platform_device.h>
10
11#include <asm/mach-rc32434/gpio.h>
12#include <asm/mach-rc32434/rb.h>
13
14#define DRV_NAME "rb532-button"
15
16#define RB532_BTN_RATE 100 /* msec */
17#define RB532_BTN_KSYM BTN_0
18
19/* The S1 button state is provided by GPIO pin 1. But as this
20 * pin is also used for uart input as alternate function, the
21 * operational modes must be switched first:
22 * 1) disable uart using set_latch_u5()
23 * 2) turn off alternate function implicitly through
24 * gpio_direction_input()
25 * 3) read the GPIO's current value
26 * 4) undo step 2 by enabling alternate function (in this
27 * mode the GPIO direction is fixed, so no change needed)
28 * 5) turn on uart again
29 * The GPIO value occurs to be inverted, so pin high means
30 * button is not pressed.
31 */
32static bool rb532_button_pressed(void)
33{
34 int val;
35
36 set_latch_u5(0, LO_FOFF);
37 gpio_direction_input(GPIO_BTN_S1);
38
39 val = gpio_get_value(GPIO_BTN_S1);
40
41 rb532_gpio_set_func(GPIO_BTN_S1);
42 set_latch_u5(LO_FOFF, 0);
43
44 return !val;
45}
46
47static void rb532_button_poll(struct input_polled_dev *poll_dev)
48{
49 input_report_key(poll_dev->input, RB532_BTN_KSYM,
50 rb532_button_pressed());
51 input_sync(poll_dev->input);
52}
53
54static int __devinit rb532_button_probe(struct platform_device *pdev)
55{
56 struct input_polled_dev *poll_dev;
57 int error;
58
59 poll_dev = input_allocate_polled_device();
60 if (!poll_dev)
61 return -ENOMEM;
62
63 poll_dev->poll = rb532_button_poll;
64 poll_dev->poll_interval = RB532_BTN_RATE;
65
66 poll_dev->input->name = "rb532 button";
67 poll_dev->input->phys = "rb532/button0";
68 poll_dev->input->id.bustype = BUS_HOST;
69 poll_dev->input->dev.parent = &pdev->dev;
70
71 dev_set_drvdata(&pdev->dev, poll_dev);
72
73 input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM);
74
75 error = input_register_polled_device(poll_dev);
76 if (error) {
77 input_free_polled_device(poll_dev);
78 return error;
79 }
80
81 return 0;
82}
83
84static int __devexit rb532_button_remove(struct platform_device *pdev)
85{
86 struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev);
87
88 input_unregister_polled_device(poll_dev);
89 input_free_polled_device(poll_dev);
90 dev_set_drvdata(&pdev->dev, NULL);
91
92 return 0;
93}
94
95static struct platform_driver rb532_button_driver = {
96 .probe = rb532_button_probe,
97 .remove = __devexit_p(rb532_button_remove),
98 .driver = {
99 .name = DRV_NAME,
100 .owner = THIS_MODULE,
101 },
102};
JJ Ding840a7462011-11-29 11:08:40 -0800103module_platform_driver(rb532_button_driver);
Phil Sutterd9bdffd2009-03-04 23:27:15 -0800104
105MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
106MODULE_LICENSE("GPL");
107MODULE_DESCRIPTION("Support for S1 button on Routerboard 532");
108MODULE_ALIAS("platform:" DRV_NAME);