Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 1 | /* |
| 2 | * An I2C driver for the Philips PCF8563 RTC |
| 3 | * Copyright 2005-06 Tower Technologies |
| 4 | * |
| 5 | * Author: Alessandro Zummo <a.zummo@towertech.it> |
| 6 | * Maintainers: http://www.nslu2-linux.org/ |
| 7 | * |
| 8 | * based on the other drivers in this same directory. |
| 9 | * |
| 10 | * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify |
| 13 | * it under the terms of the GNU General Public License version 2 as |
| 14 | * published by the Free Software Foundation. |
| 15 | */ |
| 16 | |
| 17 | #include <linux/i2c.h> |
| 18 | #include <linux/bcd.h> |
| 19 | #include <linux/rtc.h> |
| 20 | |
| 21 | #define DRV_VERSION "0.4.2" |
| 22 | |
| 23 | /* Addresses to scan: none |
| 24 | * This chip cannot be reliably autodetected. An empty eeprom |
| 25 | * located at 0x51 will pass the validation routine due to |
| 26 | * the way the registers are implemented. |
| 27 | */ |
| 28 | static unsigned short normal_i2c[] = { I2C_CLIENT_END }; |
| 29 | |
| 30 | /* Module parameters */ |
| 31 | I2C_CLIENT_INSMOD; |
| 32 | |
| 33 | #define PCF8563_REG_ST1 0x00 /* status */ |
| 34 | #define PCF8563_REG_ST2 0x01 |
| 35 | |
| 36 | #define PCF8563_REG_SC 0x02 /* datetime */ |
| 37 | #define PCF8563_REG_MN 0x03 |
| 38 | #define PCF8563_REG_HR 0x04 |
| 39 | #define PCF8563_REG_DM 0x05 |
| 40 | #define PCF8563_REG_DW 0x06 |
| 41 | #define PCF8563_REG_MO 0x07 |
| 42 | #define PCF8563_REG_YR 0x08 |
| 43 | |
| 44 | #define PCF8563_REG_AMN 0x09 /* alarm */ |
| 45 | #define PCF8563_REG_AHR 0x0A |
| 46 | #define PCF8563_REG_ADM 0x0B |
| 47 | #define PCF8563_REG_ADW 0x0C |
| 48 | |
| 49 | #define PCF8563_REG_CLKO 0x0D /* clock out */ |
| 50 | #define PCF8563_REG_TMRC 0x0E /* timer control */ |
| 51 | #define PCF8563_REG_TMR 0x0F /* timer */ |
| 52 | |
| 53 | #define PCF8563_SC_LV 0x80 /* low voltage */ |
| 54 | #define PCF8563_MO_C 0x80 /* century */ |
| 55 | |
| 56 | static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind); |
| 57 | static int pcf8563_detach(struct i2c_client *client); |
| 58 | |
| 59 | /* |
| 60 | * In the routines that deal directly with the pcf8563 hardware, we use |
| 61 | * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
| 62 | */ |
| 63 | static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 64 | { |
| 65 | unsigned char buf[13] = { PCF8563_REG_ST1 }; |
| 66 | |
| 67 | struct i2c_msg msgs[] = { |
| 68 | { client->addr, 0, 1, buf }, /* setup read ptr */ |
| 69 | { client->addr, I2C_M_RD, 13, buf }, /* read status + date */ |
| 70 | }; |
| 71 | |
| 72 | /* read registers */ |
| 73 | if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { |
| 74 | dev_err(&client->dev, "%s: read error\n", __FUNCTION__); |
| 75 | return -EIO; |
| 76 | } |
| 77 | |
| 78 | if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) |
| 79 | dev_info(&client->dev, |
| 80 | "low voltage detected, date/time is not reliable.\n"); |
| 81 | |
| 82 | dev_dbg(&client->dev, |
| 83 | "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " |
| 84 | "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
| 85 | __FUNCTION__, |
| 86 | buf[0], buf[1], buf[2], buf[3], |
| 87 | buf[4], buf[5], buf[6], buf[7], |
| 88 | buf[8]); |
| 89 | |
| 90 | |
| 91 | tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F); |
| 92 | tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F); |
| 93 | tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
| 94 | tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F); |
| 95 | tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; |
| 96 | tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
| 97 | tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR]) |
Jean-Baptiste Maneyrol | 1713e90 | 2006-09-30 23:28:12 -0700 | [diff] [blame] | 98 | + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 0 : 100); |
Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 99 | |
| 100 | dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
| 101 | "mday=%d, mon=%d, year=%d, wday=%d\n", |
| 102 | __FUNCTION__, |
| 103 | tm->tm_sec, tm->tm_min, tm->tm_hour, |
| 104 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| 105 | |
| 106 | /* the clock can give out invalid datetime, but we cannot return |
| 107 | * -EINVAL otherwise hwclock will refuse to set the time on bootup. |
| 108 | */ |
| 109 | if (rtc_valid_tm(tm) < 0) |
| 110 | dev_err(&client->dev, "retrieved date/time is not valid.\n"); |
| 111 | |
| 112 | return 0; |
| 113 | } |
| 114 | |
| 115 | static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
| 116 | { |
| 117 | int i, err; |
| 118 | unsigned char buf[9]; |
| 119 | |
| 120 | dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " |
| 121 | "mday=%d, mon=%d, year=%d, wday=%d\n", |
| 122 | __FUNCTION__, |
| 123 | tm->tm_sec, tm->tm_min, tm->tm_hour, |
| 124 | tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
| 125 | |
| 126 | /* hours, minutes and seconds */ |
| 127 | buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec); |
| 128 | buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min); |
| 129 | buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour); |
| 130 | |
| 131 | buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday); |
| 132 | |
| 133 | /* month, 1 - 12 */ |
| 134 | buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1); |
| 135 | |
| 136 | /* year and century */ |
| 137 | buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100); |
Jean-Baptiste Maneyrol | 1713e90 | 2006-09-30 23:28:12 -0700 | [diff] [blame] | 138 | if (tm->tm_year < 100) |
Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 139 | buf[PCF8563_REG_MO] |= PCF8563_MO_C; |
| 140 | |
| 141 | buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; |
| 142 | |
| 143 | /* write register's data */ |
| 144 | for (i = 0; i < 7; i++) { |
| 145 | unsigned char data[2] = { PCF8563_REG_SC + i, |
| 146 | buf[PCF8563_REG_SC + i] }; |
| 147 | |
| 148 | err = i2c_master_send(client, data, sizeof(data)); |
| 149 | if (err != sizeof(data)) { |
| 150 | dev_err(&client->dev, |
| 151 | "%s: err=%d addr=%02x, data=%02x\n", |
| 152 | __FUNCTION__, err, data[0], data[1]); |
| 153 | return -EIO; |
| 154 | } |
| 155 | }; |
| 156 | |
| 157 | return 0; |
| 158 | } |
| 159 | |
| 160 | struct pcf8563_limit |
| 161 | { |
| 162 | unsigned char reg; |
| 163 | unsigned char mask; |
| 164 | unsigned char min; |
| 165 | unsigned char max; |
| 166 | }; |
| 167 | |
| 168 | static int pcf8563_validate_client(struct i2c_client *client) |
| 169 | { |
| 170 | int i; |
| 171 | |
| 172 | static const struct pcf8563_limit pattern[] = { |
| 173 | /* register, mask, min, max */ |
| 174 | { PCF8563_REG_SC, 0x7F, 0, 59 }, |
| 175 | { PCF8563_REG_MN, 0x7F, 0, 59 }, |
| 176 | { PCF8563_REG_HR, 0x3F, 0, 23 }, |
| 177 | { PCF8563_REG_DM, 0x3F, 0, 31 }, |
| 178 | { PCF8563_REG_MO, 0x1F, 0, 12 }, |
| 179 | }; |
| 180 | |
| 181 | /* check limits (only registers with bcd values) */ |
| 182 | for (i = 0; i < ARRAY_SIZE(pattern); i++) { |
| 183 | int xfer; |
| 184 | unsigned char value; |
| 185 | unsigned char buf = pattern[i].reg; |
| 186 | |
| 187 | struct i2c_msg msgs[] = { |
| 188 | { client->addr, 0, 1, &buf }, |
| 189 | { client->addr, I2C_M_RD, 1, &buf }, |
| 190 | }; |
| 191 | |
| 192 | xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 193 | |
| 194 | if (xfer != ARRAY_SIZE(msgs)) { |
| 195 | dev_err(&client->adapter->dev, |
| 196 | "%s: could not read register 0x%02X\n", |
| 197 | __FUNCTION__, pattern[i].reg); |
| 198 | |
| 199 | return -EIO; |
| 200 | } |
| 201 | |
| 202 | value = BCD2BIN(buf & pattern[i].mask); |
| 203 | |
| 204 | if (value > pattern[i].max || |
| 205 | value < pattern[i].min) { |
| 206 | dev_dbg(&client->adapter->dev, |
| 207 | "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, " |
| 208 | "max=%d, value=%d, raw=0x%02X\n", |
| 209 | __FUNCTION__, i, pattern[i].reg, pattern[i].mask, |
| 210 | pattern[i].min, pattern[i].max, |
| 211 | value, buf); |
| 212 | |
| 213 | return -ENODEV; |
| 214 | } |
| 215 | } |
| 216 | |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 221 | { |
| 222 | return pcf8563_get_datetime(to_i2c_client(dev), tm); |
| 223 | } |
| 224 | |
| 225 | static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 226 | { |
| 227 | return pcf8563_set_datetime(to_i2c_client(dev), tm); |
| 228 | } |
| 229 | |
David Brownell | ff8371a | 2006-09-30 23:28:17 -0700 | [diff] [blame] | 230 | static const struct rtc_class_ops pcf8563_rtc_ops = { |
Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 231 | .read_time = pcf8563_rtc_read_time, |
| 232 | .set_time = pcf8563_rtc_set_time, |
| 233 | }; |
| 234 | |
| 235 | static int pcf8563_attach(struct i2c_adapter *adapter) |
| 236 | { |
| 237 | return i2c_probe(adapter, &addr_data, pcf8563_probe); |
| 238 | } |
| 239 | |
| 240 | static struct i2c_driver pcf8563_driver = { |
| 241 | .driver = { |
| 242 | .name = "pcf8563", |
| 243 | }, |
| 244 | .id = I2C_DRIVERID_PCF8563, |
| 245 | .attach_adapter = &pcf8563_attach, |
| 246 | .detach_client = &pcf8563_detach, |
| 247 | }; |
| 248 | |
| 249 | static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) |
| 250 | { |
| 251 | struct i2c_client *client; |
| 252 | struct rtc_device *rtc; |
| 253 | |
| 254 | int err = 0; |
| 255 | |
| 256 | dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); |
| 257 | |
| 258 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { |
| 259 | err = -ENODEV; |
| 260 | goto exit; |
| 261 | } |
| 262 | |
| 263 | if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { |
| 264 | err = -ENOMEM; |
| 265 | goto exit; |
| 266 | } |
| 267 | |
| 268 | client->addr = address; |
| 269 | client->driver = &pcf8563_driver; |
| 270 | client->adapter = adapter; |
| 271 | |
| 272 | strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE); |
| 273 | |
| 274 | /* Verify the chip is really an PCF8563 */ |
| 275 | if (kind < 0) { |
| 276 | if (pcf8563_validate_client(client) < 0) { |
| 277 | err = -ENODEV; |
| 278 | goto exit_kfree; |
| 279 | } |
| 280 | } |
| 281 | |
| 282 | /* Inform the i2c layer */ |
| 283 | if ((err = i2c_attach_client(client))) |
| 284 | goto exit_kfree; |
| 285 | |
| 286 | dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); |
| 287 | |
| 288 | rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev, |
| 289 | &pcf8563_rtc_ops, THIS_MODULE); |
| 290 | |
| 291 | if (IS_ERR(rtc)) { |
| 292 | err = PTR_ERR(rtc); |
Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 293 | goto exit_detach; |
| 294 | } |
| 295 | |
| 296 | i2c_set_clientdata(client, rtc); |
| 297 | |
| 298 | return 0; |
| 299 | |
| 300 | exit_detach: |
| 301 | i2c_detach_client(client); |
| 302 | |
| 303 | exit_kfree: |
| 304 | kfree(client); |
| 305 | |
| 306 | exit: |
| 307 | return err; |
| 308 | } |
| 309 | |
| 310 | static int pcf8563_detach(struct i2c_client *client) |
| 311 | { |
| 312 | int err; |
| 313 | struct rtc_device *rtc = i2c_get_clientdata(client); |
| 314 | |
Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 315 | if (rtc) |
| 316 | rtc_device_unregister(rtc); |
| 317 | |
| 318 | if ((err = i2c_detach_client(client))) |
| 319 | return err; |
| 320 | |
| 321 | kfree(client); |
| 322 | |
| 323 | return 0; |
| 324 | } |
| 325 | |
| 326 | static int __init pcf8563_init(void) |
| 327 | { |
| 328 | return i2c_add_driver(&pcf8563_driver); |
| 329 | } |
| 330 | |
| 331 | static void __exit pcf8563_exit(void) |
| 332 | { |
| 333 | i2c_del_driver(&pcf8563_driver); |
| 334 | } |
| 335 | |
| 336 | MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); |
| 337 | MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); |
| 338 | MODULE_LICENSE("GPL"); |
| 339 | MODULE_VERSION(DRV_VERSION); |
| 340 | |
| 341 | module_init(pcf8563_init); |
| 342 | module_exit(pcf8563_exit); |