blob: 45d1ee93cd39979e0f6788f73f9b7a4571eed4e6 [file] [log] [blame]
Tilman Schmidt2869b232007-02-12 00:52:34 -08001/* This is the serial hardware link layer (HLL) for the Gigaset 307x isdn
2 * DECT base (aka Sinus 45 isdn) using the RS232 DECT data module M101,
3 * written as a line discipline.
4 *
5 * =====================================================================
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; either version 2 of
9 * the License, or (at your option) any later version.
10 * =====================================================================
11 */
12
13#include "gigaset.h"
14
15#include <linux/module.h>
16#include <linux/moduleparam.h>
17#include <linux/platform_device.h>
18#include <linux/tty.h>
19#include <linux/poll.h>
Tilman Schmidtee51ef02008-02-06 01:38:30 -080020#include <linux/completion.h>
Tilman Schmidt2869b232007-02-12 00:52:34 -080021
22/* Version Information */
23#define DRIVER_AUTHOR "Tilman Schmidt"
24#define DRIVER_DESC "Serial Driver for Gigaset 307x using Siemens M101"
25
26#define GIGASET_MINORS 1
27#define GIGASET_MINOR 0
28#define GIGASET_MODULENAME "ser_gigaset"
29#define GIGASET_DEVNAME "ttyGS"
30
31/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
32#define IF_WRITEBUF 264
33
34MODULE_AUTHOR(DRIVER_AUTHOR);
35MODULE_DESCRIPTION(DRIVER_DESC);
36MODULE_LICENSE("GPL");
37MODULE_ALIAS_LDISC(N_GIGASET_M101);
38
39static int startmode = SM_ISDN;
40module_param(startmode, int, S_IRUGO);
41MODULE_PARM_DESC(startmode, "initial operation mode");
42static int cidmode = 1;
43module_param(cidmode, int, S_IRUGO);
44MODULE_PARM_DESC(cidmode, "stay in CID mode when idle");
45
46static struct gigaset_driver *driver;
47
48struct ser_cardstate {
49 struct platform_device dev;
50 struct tty_struct *tty;
51 atomic_t refcnt;
Tilman Schmidtee51ef02008-02-06 01:38:30 -080052 struct completion dead_cmp;
Tilman Schmidt2869b232007-02-12 00:52:34 -080053};
54
55static struct platform_driver device_driver = {
56 .driver = {
57 .name = GIGASET_MODULENAME,
58 },
59};
60
61static void flush_send_queue(struct cardstate *);
62
63/* transmit data from current open skb
64 * result: number of bytes sent or error code < 0
65 */
66static int write_modem(struct cardstate *cs)
67{
68 struct tty_struct *tty = cs->hw.ser->tty;
69 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
70 struct sk_buff *skb = bcs->tx_skb;
Alan Coxf34d7a52008-04-30 00:54:13 -070071 int sent = -EOPNOTSUPP;
Tilman Schmidt2869b232007-02-12 00:52:34 -080072
73 if (!tty || !tty->driver || !skb)
Alan Coxf34d7a52008-04-30 00:54:13 -070074 return -EINVAL;
Tilman Schmidt2869b232007-02-12 00:52:34 -080075
76 if (!skb->len) {
77 dev_kfree_skb_any(skb);
78 bcs->tx_skb = NULL;
79 return -EINVAL;
80 }
81
82 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
Alan Coxf34d7a52008-04-30 00:54:13 -070083 if (tty->ops->write)
84 sent = tty->ops->write(tty, skb->data, skb->len);
Tilman Schmidt2869b232007-02-12 00:52:34 -080085 gig_dbg(DEBUG_OUTPUT, "write_modem: sent %d", sent);
86 if (sent < 0) {
87 /* error */
88 flush_send_queue(cs);
89 return sent;
90 }
91 skb_pull(skb, sent);
92 if (!skb->len) {
93 /* skb sent completely */
94 gigaset_skb_sent(bcs, skb);
95
96 gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
97 (unsigned long) skb);
98 dev_kfree_skb_any(skb);
99 bcs->tx_skb = NULL;
100 }
101 return sent;
102}
103
104/*
105 * transmit first queued command buffer
106 * result: number of bytes sent or error code < 0
107 */
108static int send_cb(struct cardstate *cs)
109{
110 struct tty_struct *tty = cs->hw.ser->tty;
111 struct cmdbuf_t *cb, *tcb;
112 unsigned long flags;
113 int sent = 0;
114
115 if (!tty || !tty->driver)
116 return -EFAULT;
117
118 cb = cs->cmdbuf;
119 if (!cb)
120 return 0; /* nothing to do */
121
122 if (cb->len) {
123 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
Alan Coxf34d7a52008-04-30 00:54:13 -0700124 sent = tty->ops->write(tty, cb->buf + cb->offset, cb->len);
Tilman Schmidt2869b232007-02-12 00:52:34 -0800125 if (sent < 0) {
126 /* error */
127 gig_dbg(DEBUG_OUTPUT, "send_cb: write error %d", sent);
128 flush_send_queue(cs);
129 return sent;
130 }
131 cb->offset += sent;
132 cb->len -= sent;
133 gig_dbg(DEBUG_OUTPUT, "send_cb: sent %d, left %u, queued %u",
134 sent, cb->len, cs->cmdbytes);
135 }
136
137 while (cb && !cb->len) {
138 spin_lock_irqsave(&cs->cmdlock, flags);
139 cs->cmdbytes -= cs->curlen;
140 tcb = cb;
141 cs->cmdbuf = cb = cb->next;
142 if (cb) {
143 cb->prev = NULL;
144 cs->curlen = cb->len;
145 } else {
146 cs->lastcmdbuf = NULL;
147 cs->curlen = 0;
148 }
149 spin_unlock_irqrestore(&cs->cmdlock, flags);
150
151 if (tcb->wake_tasklet)
152 tasklet_schedule(tcb->wake_tasklet);
153 kfree(tcb);
154 }
155 return sent;
156}
157
158/*
159 * send queue tasklet
160 * If there is already a skb opened, put data to the transfer buffer
161 * by calling "write_modem".
162 * Otherwise take a new skb out of the queue.
163 */
164static void gigaset_modem_fill(unsigned long data)
165{
166 struct cardstate *cs = (struct cardstate *) data;
167 struct bc_state *bcs;
168 int sent = 0;
169
170 if (!cs || !(bcs = cs->bcs)) {
171 gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
172 return;
173 }
174 if (!bcs->tx_skb) {
175 /* no skb is being sent; send command if any */
176 sent = send_cb(cs);
177 gig_dbg(DEBUG_OUTPUT, "%s: send_cb -> %d", __func__, sent);
178 if (sent)
179 /* something sent or error */
180 return;
181
182 /* no command to send; get skb */
183 if (!(bcs->tx_skb = skb_dequeue(&bcs->squeue)))
184 /* no skb either, nothing to do */
185 return;
186
187 gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)",
188 (unsigned long) bcs->tx_skb);
189 }
190
191 /* send skb */
192 gig_dbg(DEBUG_OUTPUT, "%s: tx_skb", __func__);
193 if (write_modem(cs) < 0)
194 gig_dbg(DEBUG_OUTPUT, "%s: write_modem failed", __func__);
195}
196
197/*
198 * throw away all data queued for sending
199 */
200static void flush_send_queue(struct cardstate *cs)
201{
202 struct sk_buff *skb;
203 struct cmdbuf_t *cb;
204 unsigned long flags;
205
206 /* command queue */
207 spin_lock_irqsave(&cs->cmdlock, flags);
208 while ((cb = cs->cmdbuf) != NULL) {
209 cs->cmdbuf = cb->next;
210 if (cb->wake_tasklet)
211 tasklet_schedule(cb->wake_tasklet);
212 kfree(cb);
213 }
214 cs->cmdbuf = cs->lastcmdbuf = NULL;
215 cs->cmdbytes = cs->curlen = 0;
216 spin_unlock_irqrestore(&cs->cmdlock, flags);
217
218 /* data queue */
219 if (cs->bcs->tx_skb)
220 dev_kfree_skb_any(cs->bcs->tx_skb);
221 while ((skb = skb_dequeue(&cs->bcs->squeue)) != NULL)
222 dev_kfree_skb_any(skb);
223}
224
225
226/* Gigaset Driver Interface */
227/* ======================== */
228
229/*
230 * queue an AT command string for transmission to the Gigaset device
231 * parameters:
232 * cs controller state structure
233 * buf buffer containing the string to send
234 * len number of characters to send
235 * wake_tasklet tasklet to run when transmission is complete, or NULL
236 * return value:
237 * number of bytes queued, or error code < 0
238 */
239static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
240 int len, struct tasklet_struct *wake_tasklet)
241{
242 struct cmdbuf_t *cb;
243 unsigned long flags;
244
Tilman Schmidt9d4bee22008-02-06 01:38:28 -0800245 gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
Tilman Schmidt2869b232007-02-12 00:52:34 -0800246 DEBUG_TRANSCMD : DEBUG_LOCKCMD,
247 "CMD Transmit", len, buf);
248
249 if (len <= 0)
250 return 0;
251
252 if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
253 dev_err(cs->dev, "%s: out of memory!\n", __func__);
254 return -ENOMEM;
255 }
256
257 memcpy(cb->buf, buf, len);
258 cb->len = len;
259 cb->offset = 0;
260 cb->next = NULL;
261 cb->wake_tasklet = wake_tasklet;
262
263 spin_lock_irqsave(&cs->cmdlock, flags);
264 cb->prev = cs->lastcmdbuf;
265 if (cs->lastcmdbuf)
266 cs->lastcmdbuf->next = cb;
267 else {
268 cs->cmdbuf = cb;
269 cs->curlen = len;
270 }
271 cs->cmdbytes += len;
272 cs->lastcmdbuf = cb;
273 spin_unlock_irqrestore(&cs->cmdlock, flags);
274
275 spin_lock_irqsave(&cs->lock, flags);
276 if (cs->connected)
277 tasklet_schedule(&cs->write_tasklet);
278 spin_unlock_irqrestore(&cs->lock, flags);
279 return len;
280}
281
282/*
283 * tty_driver.write_room interface routine
284 * return number of characters the driver will accept to be written
285 * parameter:
286 * controller state structure
287 * return value:
288 * number of characters
289 */
290static int gigaset_write_room(struct cardstate *cs)
291{
292 unsigned bytes;
293
294 bytes = cs->cmdbytes;
295 return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
296}
297
298/*
299 * tty_driver.chars_in_buffer interface routine
300 * return number of characters waiting to be sent
301 * parameter:
302 * controller state structure
303 * return value:
304 * number of characters
305 */
306static int gigaset_chars_in_buffer(struct cardstate *cs)
307{
308 return cs->cmdbytes;
309}
310
311/*
312 * implementation of ioctl(GIGASET_BRKCHARS)
313 * parameter:
314 * controller state structure
315 * return value:
316 * -EINVAL (unimplemented function)
317 */
318static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
319{
320 /* not implemented */
321 return -EINVAL;
322}
323
324/*
325 * Open B channel
326 * Called by "do_action" in ev-layer.c
327 */
328static int gigaset_init_bchannel(struct bc_state *bcs)
329{
330 /* nothing to do for M10x */
331 gigaset_bchannel_up(bcs);
332 return 0;
333}
334
335/*
336 * Close B channel
337 * Called by "do_action" in ev-layer.c
338 */
339static int gigaset_close_bchannel(struct bc_state *bcs)
340{
341 /* nothing to do for M10x */
342 gigaset_bchannel_down(bcs);
343 return 0;
344}
345
346/*
347 * Set up B channel structure
348 * This is called by "gigaset_initcs" in common.c
349 */
350static int gigaset_initbcshw(struct bc_state *bcs)
351{
352 /* unused */
353 bcs->hw.ser = NULL;
354 return 1;
355}
356
357/*
358 * Free B channel structure
359 * Called by "gigaset_freebcs" in common.c
360 */
361static int gigaset_freebcshw(struct bc_state *bcs)
362{
363 /* unused */
364 return 1;
365}
366
367/*
368 * Reinitialize B channel structure
369 * This is called by "bcs_reinit" in common.c
370 */
371static void gigaset_reinitbcshw(struct bc_state *bcs)
372{
373 /* nothing to do for M10x */
374}
375
376/*
377 * Free hardware specific device data
378 * This will be called by "gigaset_freecs" in common.c
379 */
380static void gigaset_freecshw(struct cardstate *cs)
381{
382 tasklet_kill(&cs->write_tasklet);
383 if (!cs->hw.ser)
384 return;
385 dev_set_drvdata(&cs->hw.ser->dev.dev, NULL);
386 platform_device_unregister(&cs->hw.ser->dev);
387 kfree(cs->hw.ser);
388 cs->hw.ser = NULL;
389}
390
391static void gigaset_device_release(struct device *dev)
392{
393 struct platform_device *pdev =
394 container_of(dev, struct platform_device, dev);
395
396 /* adapted from platform_device_release() in drivers/base/platform.c */
397 //FIXME is this actually necessary?
398 kfree(dev->platform_data);
399 kfree(pdev->resource);
400}
401
402/*
403 * Set up hardware specific device data
404 * This is called by "gigaset_initcs" in common.c
405 */
406static int gigaset_initcshw(struct cardstate *cs)
407{
408 int rc;
409
410 if (!(cs->hw.ser = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL))) {
411 err("%s: out of memory!", __func__);
412 return 0;
413 }
414
415 cs->hw.ser->dev.name = GIGASET_MODULENAME;
416 cs->hw.ser->dev.id = cs->minor_index;
417 cs->hw.ser->dev.dev.release = gigaset_device_release;
418 if ((rc = platform_device_register(&cs->hw.ser->dev)) != 0) {
419 err("error %d registering platform device", rc);
420 kfree(cs->hw.ser);
421 cs->hw.ser = NULL;
422 return 0;
423 }
424 dev_set_drvdata(&cs->hw.ser->dev.dev, cs);
425
426 tasklet_init(&cs->write_tasklet,
427 &gigaset_modem_fill, (unsigned long) cs);
428 return 1;
429}
430
431/*
432 * set modem control lines
433 * Parameters:
434 * card state structure
435 * modem control line state ([TIOCM_DTR]|[TIOCM_RTS])
436 * Called by "gigaset_start" and "gigaset_enterconfigmode" in common.c
437 * and by "if_lock" and "if_termios" in interface.c
438 */
439static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state)
440{
441 struct tty_struct *tty = cs->hw.ser->tty;
442 unsigned int set, clear;
443
Alan Coxf34d7a52008-04-30 00:54:13 -0700444 if (!tty || !tty->driver || !tty->ops->tiocmset)
445 return -EINVAL;
Tilman Schmidt2869b232007-02-12 00:52:34 -0800446 set = new_state & ~old_state;
447 clear = old_state & ~new_state;
448 if (!set && !clear)
449 return 0;
450 gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
Alan Coxf34d7a52008-04-30 00:54:13 -0700451 return tty->ops->tiocmset(tty, NULL, set, clear);
Tilman Schmidt2869b232007-02-12 00:52:34 -0800452}
453
454static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
455{
456 return -EINVAL;
457}
458
459static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
460{
461 return -EINVAL;
462}
463
Tilman Schmidt35dc8452007-03-29 01:20:34 -0700464static const struct gigaset_ops ops = {
Tilman Schmidt2869b232007-02-12 00:52:34 -0800465 gigaset_write_cmd,
466 gigaset_write_room,
467 gigaset_chars_in_buffer,
468 gigaset_brkchars,
469 gigaset_init_bchannel,
470 gigaset_close_bchannel,
471 gigaset_initbcshw,
472 gigaset_freebcshw,
473 gigaset_reinitbcshw,
474 gigaset_initcshw,
475 gigaset_freecshw,
476 gigaset_set_modem_ctrl,
477 gigaset_baud_rate,
478 gigaset_set_line_ctrl,
479 gigaset_m10x_send_skb, /* asyncdata.c */
480 gigaset_m10x_input, /* asyncdata.c */
481};
482
483
484/* Line Discipline Interface */
485/* ========================= */
486
487/* helper functions for cardstate refcounting */
488static struct cardstate *cs_get(struct tty_struct *tty)
489{
490 struct cardstate *cs = tty->disc_data;
491
492 if (!cs || !cs->hw.ser) {
493 gig_dbg(DEBUG_ANY, "%s: no cardstate", __func__);
494 return NULL;
495 }
496 atomic_inc(&cs->hw.ser->refcnt);
497 return cs;
498}
499
500static void cs_put(struct cardstate *cs)
501{
502 if (atomic_dec_and_test(&cs->hw.ser->refcnt))
Tilman Schmidtee51ef02008-02-06 01:38:30 -0800503 complete(&cs->hw.ser->dead_cmp);
Tilman Schmidt2869b232007-02-12 00:52:34 -0800504}
505
506/*
507 * Called by the tty driver when the line discipline is pushed onto the tty.
508 * Called in process context.
509 */
510static int
511gigaset_tty_open(struct tty_struct *tty)
512{
513 struct cardstate *cs;
514
515 gig_dbg(DEBUG_INIT, "Starting HLL for Gigaset M101");
516
517 info(DRIVER_AUTHOR);
518 info(DRIVER_DESC);
519
520 if (!driver) {
521 err("%s: no driver structure", __func__);
522 return -ENODEV;
523 }
524
525 /* allocate memory for our device state and intialize it */
526 if (!(cs = gigaset_initcs(driver, 1, 1, 0, cidmode,
527 GIGASET_MODULENAME)))
528 goto error;
529
530 cs->dev = &cs->hw.ser->dev.dev;
531 cs->hw.ser->tty = tty;
Tilman Schmidt2869b232007-02-12 00:52:34 -0800532 atomic_set(&cs->hw.ser->refcnt, 1);
Tilman Schmidtee51ef02008-02-06 01:38:30 -0800533 init_completion(&cs->hw.ser->dead_cmp);
Tilman Schmidt2869b232007-02-12 00:52:34 -0800534
535 tty->disc_data = cs;
536
537 /* OK.. Initialization of the datastructures and the HW is done.. Now
538 * startup system and notify the LL that we are ready to run
539 */
540 if (startmode == SM_LOCKED)
Tilman Schmidt9d4bee22008-02-06 01:38:28 -0800541 cs->mstate = MS_LOCKED;
Tilman Schmidt2869b232007-02-12 00:52:34 -0800542 if (!gigaset_start(cs)) {
543 tasklet_kill(&cs->write_tasklet);
544 goto error;
545 }
546
547 gig_dbg(DEBUG_INIT, "Startup of HLL done");
Tilman Schmidt2869b232007-02-12 00:52:34 -0800548 return 0;
549
550error:
551 gig_dbg(DEBUG_INIT, "Startup of HLL failed");
552 tty->disc_data = NULL;
553 gigaset_freecs(cs);
554 return -ENODEV;
555}
556
557/*
558 * Called by the tty driver when the line discipline is removed.
559 * Called from process context.
560 */
561static void
562gigaset_tty_close(struct tty_struct *tty)
563{
564 struct cardstate *cs = tty->disc_data;
565
566 gig_dbg(DEBUG_INIT, "Stopping HLL for Gigaset M101");
567
568 if (!cs) {
569 gig_dbg(DEBUG_INIT, "%s: no cardstate", __func__);
570 return;
571 }
572
573 /* prevent other callers from entering ldisc methods */
574 tty->disc_data = NULL;
575
576 if (!cs->hw.ser)
577 err("%s: no hw cardstate", __func__);
578 else {
579 /* wait for running methods to finish */
580 if (!atomic_dec_and_test(&cs->hw.ser->refcnt))
Tilman Schmidtee51ef02008-02-06 01:38:30 -0800581 wait_for_completion(&cs->hw.ser->dead_cmp);
Tilman Schmidt2869b232007-02-12 00:52:34 -0800582 }
583
584 /* stop operations */
585 gigaset_stop(cs);
586 tasklet_kill(&cs->write_tasklet);
587 flush_send_queue(cs);
588 cs->dev = NULL;
589 gigaset_freecs(cs);
590
591 gig_dbg(DEBUG_INIT, "Shutdown of HLL done");
592}
593
594/*
595 * Called by the tty driver when the tty line is hung up.
596 * Wait for I/O to driver to complete and unregister ISDN device.
597 * This is already done by the close routine, so just call that.
598 * Called from process context.
599 */
600static int gigaset_tty_hangup(struct tty_struct *tty)
601{
602 gigaset_tty_close(tty);
603 return 0;
604}
605
606/*
607 * Read on the tty.
608 * Unused, received data goes only to the Gigaset driver.
609 */
610static ssize_t
611gigaset_tty_read(struct tty_struct *tty, struct file *file,
612 unsigned char __user *buf, size_t count)
613{
614 return -EAGAIN;
615}
616
617/*
618 * Write on the tty.
619 * Unused, transmit data comes only from the Gigaset driver.
620 */
621static ssize_t
622gigaset_tty_write(struct tty_struct *tty, struct file *file,
623 const unsigned char *buf, size_t count)
624{
625 return -EAGAIN;
626}
627
628/*
629 * Ioctl on the tty.
630 * Called in process context only.
631 * May be re-entered by multiple ioctl calling threads.
632 */
633static int
634gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
635 unsigned int cmd, unsigned long arg)
636{
637 struct cardstate *cs = cs_get(tty);
638 int rc, val;
639 int __user *p = (int __user *)arg;
640
641 if (!cs)
642 return -ENXIO;
643
644 switch (cmd) {
645 case TCGETS:
646 case TCGETA:
647 /* pass through to underlying serial device */
648 rc = n_tty_ioctl(tty, file, cmd, arg);
649 break;
650
651 case TCFLSH:
652 /* flush our buffers and the serial port's buffer */
653 switch (arg) {
654 case TCIFLUSH:
655 /* no own input buffer to flush */
656 break;
657 case TCIOFLUSH:
658 case TCOFLUSH:
659 flush_send_queue(cs);
660 break;
661 }
662 /* flush the serial port's buffer */
663 rc = n_tty_ioctl(tty, file, cmd, arg);
664 break;
665
666 case FIONREAD:
667 /* unused, always return zero */
668 val = 0;
669 rc = put_user(val, p);
670 break;
671
672 default:
673 rc = -ENOIOCTLCMD;
674 }
675
676 cs_put(cs);
677 return rc;
678}
679
680/*
681 * Poll on the tty.
682 * Unused, always return zero.
683 */
684static unsigned int
685gigaset_tty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
686{
687 return 0;
688}
689
690/*
691 * Called by the tty driver when a block of data has been received.
692 * Will not be re-entered while running but other ldisc functions
693 * may be called in parallel.
694 * Can be called from hard interrupt level as well as soft interrupt
695 * level or mainline.
696 * Parameters:
697 * tty tty structure
698 * buf buffer containing received characters
699 * cflags buffer containing error flags for received characters (ignored)
700 * count number of received characters
701 */
702static void
703gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf,
704 char *cflags, int count)
705{
706 struct cardstate *cs = cs_get(tty);
707 unsigned tail, head, n;
708 struct inbuf_t *inbuf;
709
710 if (!cs)
711 return;
712 if (!(inbuf = cs->inbuf)) {
713 dev_err(cs->dev, "%s: no inbuf\n", __func__);
714 cs_put(cs);
715 return;
716 }
717
Tilman Schmidt9d4bee22008-02-06 01:38:28 -0800718 tail = inbuf->tail;
719 head = inbuf->head;
Tilman Schmidt2869b232007-02-12 00:52:34 -0800720 gig_dbg(DEBUG_INTR, "buffer state: %u -> %u, receive %u bytes",
721 head, tail, count);
722
723 if (head <= tail) {
724 /* possible buffer wraparound */
725 n = min_t(unsigned, count, RBUFSIZE - tail);
726 memcpy(inbuf->data + tail, buf, n);
727 tail = (tail + n) % RBUFSIZE;
728 buf += n;
729 count -= n;
730 }
731
732 if (count > 0) {
733 /* tail < head and some data left */
734 n = head - tail - 1;
735 if (count > n) {
736 dev_err(cs->dev,
737 "inbuf overflow, discarding %d bytes\n",
738 count - n);
739 count = n;
740 }
741 memcpy(inbuf->data + tail, buf, count);
742 tail += count;
743 }
744
745 gig_dbg(DEBUG_INTR, "setting tail to %u", tail);
Tilman Schmidt9d4bee22008-02-06 01:38:28 -0800746 inbuf->tail = tail;
Tilman Schmidt2869b232007-02-12 00:52:34 -0800747
748 /* Everything was received .. Push data into handler */
749 gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
750 gigaset_schedule_event(cs);
751 cs_put(cs);
752}
753
754/*
755 * Called by the tty driver when there's room for more data to send.
756 */
757static void
758gigaset_tty_wakeup(struct tty_struct *tty)
759{
760 struct cardstate *cs = cs_get(tty);
761
762 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
763 if (!cs)
764 return;
765 tasklet_schedule(&cs->write_tasklet);
766 cs_put(cs);
767}
768
769static struct tty_ldisc gigaset_ldisc = {
770 .owner = THIS_MODULE,
771 .magic = TTY_LDISC_MAGIC,
772 .name = "ser_gigaset",
773 .open = gigaset_tty_open,
774 .close = gigaset_tty_close,
775 .hangup = gigaset_tty_hangup,
776 .read = gigaset_tty_read,
777 .write = gigaset_tty_write,
778 .ioctl = gigaset_tty_ioctl,
779 .poll = gigaset_tty_poll,
780 .receive_buf = gigaset_tty_receive,
781 .write_wakeup = gigaset_tty_wakeup,
782};
783
784
785/* Initialization / Shutdown */
786/* ========================= */
787
788static int __init ser_gigaset_init(void)
789{
790 int rc;
791
792 gig_dbg(DEBUG_INIT, "%s", __func__);
793 if ((rc = platform_driver_register(&device_driver)) != 0) {
794 err("error %d registering platform driver", rc);
795 return rc;
796 }
797
798 /* allocate memory for our driver state and intialize it */
799 if (!(driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
800 GIGASET_MODULENAME, GIGASET_DEVNAME,
801 &ops, THIS_MODULE)))
802 goto error;
803
804 if ((rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc)) != 0) {
805 err("error %d registering line discipline", rc);
806 goto error;
807 }
808
809 return 0;
810
811error:
812 if (driver) {
813 gigaset_freedriver(driver);
814 driver = NULL;
815 }
816 platform_driver_unregister(&device_driver);
817 return rc;
818}
819
820static void __exit ser_gigaset_exit(void)
821{
822 int rc;
823
824 gig_dbg(DEBUG_INIT, "%s", __func__);
825
826 if (driver) {
827 gigaset_freedriver(driver);
828 driver = NULL;
829 }
830
831 if ((rc = tty_unregister_ldisc(N_GIGASET_M101)) != 0)
832 err("error %d unregistering line discipline", rc);
833
834 platform_driver_unregister(&device_driver);
835}
836
837module_init(ser_gigaset_init);
838module_exit(ser_gigaset_exit);