blob: dd9c7ab38270059a147090ff87d37b45e591bc75 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * pm.h - Power management interface
3 *
4 * Copyright (C) 2000 Andrew Henroid
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef _LINUX_PM_H
22#define _LINUX_PM_H
23
Linus Torvalds1da177e2005-04-16 15:20:36 -070024#include <linux/list.h>
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +020025#include <linux/workqueue.h>
26#include <linux/spinlock.h>
27#include <linux/wait.h>
28#include <linux/timer.h>
Rafael J. Wysocki5af84b82010-01-23 22:23:32 +010029#include <linux/completion.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070032 * Callbacks for platform drivers to implement.
33 */
34extern void (*pm_idle)(void);
35extern void (*pm_power_off)(void);
Rafael J. Wysockibd804eb2007-07-19 01:47:40 -070036extern void (*pm_power_off_prepare)(void);
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
Linus Torvalds1da177e2005-04-16 15:20:36 -070038/*
39 * Device power management
40 */
41
42struct device;
43
Alan Stern7490e442010-09-25 23:35:15 +020044#ifdef CONFIG_PM
45extern const char power_group_name[]; /* = "power" */
46#else
47#define power_group_name NULL
48#endif
49
Pavel Machekca078ba2005-09-03 15:56:57 -070050typedef struct pm_message {
51 int event;
52} pm_message_t;
Linus Torvalds1da177e2005-04-16 15:20:36 -070053
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020054/**
Rafael J. Wysockiadf09492008-10-06 22:46:05 +020055 * struct dev_pm_ops - device PM callbacks
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020056 *
David Brownell82bb67f2006-08-14 23:11:04 -070057 * Several driver power state transitions are externally visible, affecting
58 * the state of pending I/O queues and (for drivers that touch hardware)
59 * interrupts, wakeups, DMA, and other hardware state. There may also be
60 * internal transitions to various low power modes, which are transparent
61 * to the rest of the driver stack (such as a driver that's ON gating off
62 * clocks which are not in active use).
Linus Torvalds1da177e2005-04-16 15:20:36 -070063 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020064 * The externally visible transitions are handled with the help of the following
65 * callbacks included in this structure:
66 *
67 * @prepare: Prepare the device for the upcoming transition, but do NOT change
68 * its hardware state. Prevent new children of the device from being
69 * registered after @prepare() returns (the driver's subsystem and
70 * generally the rest of the kernel is supposed to prevent new calls to the
71 * probe method from being made too once @prepare() has succeeded). If
72 * @prepare() detects a situation it cannot handle (e.g. registration of a
73 * child already in progress), it may return -EAGAIN, so that the PM core
74 * can execute it once again (e.g. after the new child has been registered)
75 * to recover from the race condition. This method is executed for all
76 * kinds of suspend transitions and is followed by one of the suspend
77 * callbacks: @suspend(), @freeze(), or @poweroff().
78 * The PM core executes @prepare() for all devices before starting to
79 * execute suspend callbacks for any of them, so drivers may assume all of
80 * the other devices to be present and functional while @prepare() is being
81 * executed. In particular, it is safe to make GFP_KERNEL memory
82 * allocations from within @prepare(). However, drivers may NOT assume
83 * anything about the availability of the user space at that time and it
84 * is not correct to request firmware from within @prepare() (it's too
85 * late to do that). [To work around this limitation, drivers may
86 * register suspend and hibernation notifiers that are executed before the
87 * freezing of tasks.]
88 *
89 * @complete: Undo the changes made by @prepare(). This method is executed for
90 * all kinds of resume transitions, following one of the resume callbacks:
91 * @resume(), @thaw(), @restore(). Also called if the state transition
92 * fails before the driver's suspend callback (@suspend(), @freeze(),
93 * @poweroff()) can be executed (e.g. if the suspend callback fails for one
94 * of the other devices that the PM core has unsuccessfully attempted to
95 * suspend earlier).
96 * The PM core executes @complete() after it has executed the appropriate
97 * resume callback for all devices.
98 *
99 * @suspend: Executed before putting the system into a sleep state in which the
100 * contents of main memory are preserved. Quiesce the device, put it into
101 * a low power state appropriate for the upcoming system state (such as
102 * PCI_D3hot), and enable wakeup events as appropriate.
103 *
104 * @resume: Executed after waking the system up from a sleep state in which the
105 * contents of main memory were preserved. Put the device into the
106 * appropriate state, according to the information saved in memory by the
107 * preceding @suspend(). The driver starts working again, responding to
108 * hardware events and software requests. The hardware may have gone
109 * through a power-off reset, or it may have maintained state from the
110 * previous suspend() which the driver may rely on while resuming. On most
111 * platforms, there are no restrictions on availability of resources like
112 * clocks during @resume().
113 *
114 * @freeze: Hibernation-specific, executed before creating a hibernation image.
115 * Quiesce operations so that a consistent image can be created, but do NOT
116 * otherwise put the device into a low power device state and do NOT emit
117 * system wakeup events. Save in main memory the device settings to be
118 * used by @restore() during the subsequent resume from hibernation or by
119 * the subsequent @thaw(), if the creation of the image or the restoration
120 * of main memory contents from it fails.
121 *
122 * @thaw: Hibernation-specific, executed after creating a hibernation image OR
123 * if the creation of the image fails. Also executed after a failing
124 * attempt to restore the contents of main memory from such an image.
125 * Undo the changes made by the preceding @freeze(), so the device can be
126 * operated in the same way as immediately before the call to @freeze().
127 *
128 * @poweroff: Hibernation-specific, executed after saving a hibernation image.
129 * Quiesce the device, put it into a low power state appropriate for the
130 * upcoming system state (such as PCI_D3hot), and enable wakeup events as
131 * appropriate.
132 *
133 * @restore: Hibernation-specific, executed after restoring the contents of main
134 * memory from a hibernation image. Driver starts working again,
135 * responding to hardware events and software requests. Drivers may NOT
136 * make ANY assumptions about the hardware state right prior to @restore().
137 * On most platforms, there are no restrictions on availability of
138 * resources like clocks during @restore().
139 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200140 * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
141 * actions required for suspending the device that need interrupts to be
142 * disabled
143 *
144 * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
145 * actions required for resuming the device that need interrupts to be
146 * disabled
147 *
148 * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
149 * actions required for freezing the device that need interrupts to be
150 * disabled
151 *
152 * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
153 * actions required for thawing the device that need interrupts to be
154 * disabled
155 *
156 * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
157 * actions required for handling the device that need interrupts to be
158 * disabled
159 *
160 * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
161 * actions required for restoring the operations of the device that need
162 * interrupts to be disabled
163 *
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200164 * All of the above callbacks, except for @complete(), return error codes.
165 * However, the error codes returned by the resume operations, @resume(),
166 * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do
167 * not cause the PM core to abort the resume transition during which they are
168 * returned. The error codes returned in that cases are only printed by the PM
169 * core to the system logs for debugging purposes. Still, it is recommended
170 * that drivers only return error codes from their resume methods in case of an
171 * unrecoverable failure (i.e. when the device being handled refuses to resume
172 * and becomes unusable) to allow us to modify the PM core in the future, so
173 * that it can avoid attempting to handle devices that failed to resume and
174 * their children.
175 *
176 * It is allowed to unregister devices while the above callbacks are being
177 * executed. However, it is not allowed to unregister a device from within any
178 * of its own callbacks.
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200179 *
180 * There also are the following callbacks related to run-time power management
181 * of devices:
182 *
183 * @runtime_suspend: Prepare the device for a condition in which it won't be
184 * able to communicate with the CPU(s) and RAM due to power management.
185 * This need not mean that the device should be put into a low power state.
186 * For example, if the device is behind a link which is about to be turned
187 * off, the device may remain at full power. If the device does go to low
Rafael J. Wysocki7a1a8eb2009-12-03 21:19:18 +0100188 * power and is capable of generating run-time wake-up events, remote
189 * wake-up (i.e., a hardware mechanism allowing the device to request a
190 * change of its power state via a wake-up event, such as PCI PME) should
191 * be enabled for it.
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200192 *
193 * @runtime_resume: Put the device into the fully active state in response to a
194 * wake-up event generated by hardware or at the request of software. If
195 * necessary, put the device into the full power state and restore its
196 * registers, so that it is fully operational.
197 *
198 * @runtime_idle: Device appears to be inactive and it might be put into a low
199 * power state if all of the necessary conditions are satisfied. Check
200 * these conditions and handle the device as appropriate, possibly queueing
201 * a suspend request for it. The return value is ignored by the PM core.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200202 */
203
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200204struct dev_pm_ops {
205 int (*prepare)(struct device *dev);
206 void (*complete)(struct device *dev);
207 int (*suspend)(struct device *dev);
208 int (*resume)(struct device *dev);
209 int (*freeze)(struct device *dev);
210 int (*thaw)(struct device *dev);
211 int (*poweroff)(struct device *dev);
212 int (*restore)(struct device *dev);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200213 int (*suspend_noirq)(struct device *dev);
214 int (*resume_noirq)(struct device *dev);
215 int (*freeze_noirq)(struct device *dev);
216 int (*thaw_noirq)(struct device *dev);
217 int (*poweroff_noirq)(struct device *dev);
218 int (*restore_noirq)(struct device *dev);
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200219 int (*runtime_suspend)(struct device *dev);
220 int (*runtime_resume)(struct device *dev);
221 int (*runtime_idle)(struct device *dev);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200222};
223
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100224#ifdef CONFIG_PM_SLEEP
225#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
226 .suspend = suspend_fn, \
227 .resume = resume_fn, \
228 .freeze = suspend_fn, \
229 .thaw = resume_fn, \
230 .poweroff = suspend_fn, \
231 .restore = resume_fn,
232#else
233#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
234#endif
235
236#ifdef CONFIG_PM_RUNTIME
237#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
238 .runtime_suspend = suspend_fn, \
239 .runtime_resume = resume_fn, \
240 .runtime_idle = idle_fn,
241#else
242#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
243#endif
244
Albin Tonnerre9d62ec62009-08-05 23:59:59 +0200245/*
246 * Use this if you want to use the same suspend and resume callbacks for suspend
247 * to RAM and hibernation.
248 */
249#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
Alexey Dobriyan47145212009-12-14 18:00:08 -0800250const struct dev_pm_ops name = { \
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100251 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
Albin Tonnerre9d62ec62009-08-05 23:59:59 +0200252}
253
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100254/*
255 * Use this for defining a set of PM operations to be used in all situations
256 * (sustem suspend, hibernation or runtime PM).
257 */
258#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
259const struct dev_pm_ops name = { \
260 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
261 SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
262}
263
264/*
265 * Use this for subsystems (bus types, device types, device classes) that don't
266 * need any special suspend/resume handling in addition to invoking the PM
267 * callbacks provided by device drivers supporting both the system sleep PM and
268 * runtime PM, make the pm member point to generic_subsys_pm_ops.
269 */
270#ifdef CONFIG_PM_OPS
271extern struct dev_pm_ops generic_subsys_pm_ops;
272#define GENERIC_SUBSYS_PM_OPS (&generic_subsys_pm_ops)
273#else
274#define GENERIC_SUBSYS_PM_OPS NULL
275#endif
276
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200277/**
278 * PM_EVENT_ messages
279 *
280 * The following PM_EVENT_ messages are defined for the internal use of the PM
281 * core, in order to provide a mechanism allowing the high level suspend and
282 * hibernation code to convey the necessary information to the device PM core
283 * code:
284 *
285 * ON No transition.
286 *
287 * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
288 * for all devices.
289 *
290 * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
291 * for all devices.
292 *
293 * HIBERNATE Hibernation image has been saved, call ->prepare() and
294 * ->poweroff() for all devices.
295 *
296 * QUIESCE Contents of main memory are going to be restored from a (loaded)
297 * hibernation image, call ->prepare() and ->freeze() for all
298 * devices.
299 *
300 * RESUME System is resuming, call ->resume() and ->complete() for all
301 * devices.
302 *
303 * THAW Hibernation image has been created, call ->thaw() and
304 * ->complete() for all devices.
305 *
306 * RESTORE Contents of main memory have been restored from a hibernation
307 * image, call ->restore() and ->complete() for all devices.
308 *
309 * RECOVER Creation of a hibernation image or restoration of the main
310 * memory contents from a hibernation image has failed, call
311 * ->thaw() and ->complete() for all devices.
Alan Stern8111d1b2008-07-23 21:28:37 -0700312 *
313 * The following PM_EVENT_ messages are defined for internal use by
314 * kernel subsystems. They are never issued by the PM core.
315 *
316 * USER_SUSPEND Manual selective suspend was issued by userspace.
317 *
318 * USER_RESUME Manual selective resume was issued by userspace.
319 *
320 * REMOTE_WAKEUP Remote-wakeup request was received from the device.
321 *
322 * AUTO_SUSPEND Automatic (device idle) runtime suspend was
323 * initiated by the subsystem.
324 *
325 * AUTO_RESUME Automatic (device needed) runtime resume was
326 * requested by a driver.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200327 */
328
329#define PM_EVENT_ON 0x0000
330#define PM_EVENT_FREEZE 0x0001
331#define PM_EVENT_SUSPEND 0x0002
332#define PM_EVENT_HIBERNATE 0x0004
333#define PM_EVENT_QUIESCE 0x0008
334#define PM_EVENT_RESUME 0x0010
335#define PM_EVENT_THAW 0x0020
336#define PM_EVENT_RESTORE 0x0040
337#define PM_EVENT_RECOVER 0x0080
Alan Stern8111d1b2008-07-23 21:28:37 -0700338#define PM_EVENT_USER 0x0100
339#define PM_EVENT_REMOTE 0x0200
340#define PM_EVENT_AUTO 0x0400
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200341
Alan Stern8111d1b2008-07-23 21:28:37 -0700342#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
343#define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND)
344#define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME)
Alan Stern7f4f5d42008-11-17 11:14:19 -0500345#define PM_EVENT_REMOTE_RESUME (PM_EVENT_REMOTE | PM_EVENT_RESUME)
Alan Stern8111d1b2008-07-23 21:28:37 -0700346#define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND)
347#define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME)
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200348
Alan Stern8111d1b2008-07-23 21:28:37 -0700349#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200350#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
351#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
352#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
353#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
354#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
355#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
356#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
357#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500358#define PMSG_USER_SUSPEND ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700359 { .event = PM_EVENT_USER_SUSPEND, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500360#define PMSG_USER_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700361 { .event = PM_EVENT_USER_RESUME, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500362#define PMSG_REMOTE_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700363 { .event = PM_EVENT_REMOTE_RESUME, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500364#define PMSG_AUTO_SUSPEND ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700365 { .event = PM_EVENT_AUTO_SUSPEND, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500366#define PMSG_AUTO_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700367 { .event = PM_EVENT_AUTO_RESUME, })
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200368
369/**
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200370 * Device run-time power management status.
371 *
372 * These status labels are used internally by the PM core to indicate the
373 * current status of a device with respect to the PM core operations. They do
374 * not reflect the actual power state of the device or its status as seen by the
375 * driver.
376 *
377 * RPM_ACTIVE Device is fully operational. Indicates that the device
378 * bus type's ->runtime_resume() callback has completed
379 * successfully.
380 *
381 * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
382 * completed successfully. The device is regarded as
383 * suspended.
384 *
385 * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
386 * executed.
387 *
388 * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
389 * executed.
390 */
391
392enum rpm_status {
393 RPM_ACTIVE = 0,
394 RPM_RESUMING,
395 RPM_SUSPENDED,
396 RPM_SUSPENDING,
397};
398
399/**
400 * Device run-time power management request types.
401 *
402 * RPM_REQ_NONE Do nothing.
403 *
404 * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback
405 *
406 * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback
407 *
Alan Stern15bcb91d2010-09-25 23:35:21 +0200408 * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has
409 * been inactive for as long as power.autosuspend_delay
410 *
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200411 * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback
412 */
413
414enum rpm_request {
415 RPM_REQ_NONE = 0,
416 RPM_REQ_IDLE,
417 RPM_REQ_SUSPEND,
Alan Stern15bcb91d2010-09-25 23:35:21 +0200418 RPM_REQ_AUTOSUSPEND,
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200419 RPM_REQ_RESUME,
420};
421
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200422struct wakeup_source;
423
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200424struct dev_pm_info {
425 pm_message_t power_state;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200426 unsigned int can_wakeup:1;
Rafael J. Wysockib8c76f62010-12-16 00:51:21 +0100427 unsigned int async_suspend:1;
428 unsigned int in_suspend:1; /* Owned by the PM core */
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200429 spinlock_t lock;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200430#ifdef CONFIG_PM_SLEEP
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200431 struct list_head entry;
Rafael J. Wysocki5af84b82010-01-23 22:23:32 +0100432 struct completion completion;
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200433 struct wakeup_source *wakeup;
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200434#endif
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200435#ifdef CONFIG_PM_RUNTIME
436 struct timer_list suspend_timer;
437 unsigned long timer_expires;
438 struct work_struct work;
439 wait_queue_head_t wait_queue;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200440 atomic_t usage_count;
441 atomic_t child_count;
442 unsigned int disable_depth:3;
443 unsigned int ignore_children:1;
444 unsigned int idle_notification:1;
445 unsigned int request_pending:1;
446 unsigned int deferred_resume:1;
Rafael J. Wysocki7a1a8eb2009-12-03 21:19:18 +0100447 unsigned int run_wake:1;
Rafael J. Wysocki53823632010-01-23 22:02:51 +0100448 unsigned int runtime_auto:1;
Alan Stern7490e442010-09-25 23:35:15 +0200449 unsigned int no_callbacks:1;
Alan Sternc7b61de2010-12-01 00:14:42 +0100450 unsigned int irq_safe:1;
Alan Stern15bcb91d2010-09-25 23:35:21 +0200451 unsigned int use_autosuspend:1;
452 unsigned int timer_autosuspends:1;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200453 enum rpm_request request;
454 enum rpm_status runtime_status;
455 int runtime_error;
Alan Stern15bcb91d2010-09-25 23:35:21 +0200456 int autosuspend_delay;
457 unsigned long last_busy;
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200458 unsigned long active_jiffies;
459 unsigned long suspended_jiffies;
460 unsigned long accounting_timestamp;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200461#endif
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200462};
463
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200464extern void update_pm_runtime_accounting(struct device *dev);
465
466
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200467/*
468 * The PM_EVENT_ messages are also used by drivers implementing the legacy
469 * suspend framework, based on the ->suspend() and ->resume() callbacks common
470 * for suspend and hibernation transitions, according to the rules below.
471 */
472
473/* Necessary, because several drivers use PM_EVENT_PRETHAW */
474#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
475
476/*
David Brownell82bb67f2006-08-14 23:11:04 -0700477 * One transition is triggered by resume(), after a suspend() call; the
478 * message is implicit:
479 *
480 * ON Driver starts working again, responding to hardware events
481 * and software requests. The hardware may have gone through
482 * a power-off reset, or it may have maintained state from the
483 * previous suspend() which the driver will rely on while
484 * resuming. On most platforms, there are no restrictions on
485 * availability of resources like clocks during resume().
486 *
487 * Other transitions are triggered by messages sent using suspend(). All
488 * these transitions quiesce the driver, so that I/O queues are inactive.
489 * That commonly entails turning off IRQs and DMA; there may be rules
490 * about how to quiesce that are specific to the bus or the device's type.
491 * (For example, network drivers mark the link state.) Other details may
492 * differ according to the message:
493 *
494 * SUSPEND Quiesce, enter a low power device state appropriate for
495 * the upcoming system state (such as PCI_D3hot), and enable
496 * wakeup events as appropriate.
497 *
Rafael J. Wysocki3a2d5b72008-02-23 19:13:25 +0100498 * HIBERNATE Enter a low power device state appropriate for the hibernation
499 * state (eg. ACPI S4) and enable wakeup events as appropriate.
500 *
David Brownell82bb67f2006-08-14 23:11:04 -0700501 * FREEZE Quiesce operations so that a consistent image can be saved;
502 * but do NOT otherwise enter a low power device state, and do
503 * NOT emit system wakeup events.
504 *
505 * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
506 * the system from a snapshot taken after an earlier FREEZE.
507 * Some drivers will need to reset their hardware state instead
508 * of preserving it, to ensure that it's never mistaken for the
509 * state which that earlier snapshot had set up.
510 *
511 * A minimally power-aware driver treats all messages as SUSPEND, fully
512 * reinitializes its device during resume() -- whether or not it was reset
513 * during the suspend/resume cycle -- and can't issue wakeup events.
514 *
515 * More power-aware drivers may also use low power states at runtime as
516 * well as during system sleep states like PM_SUSPEND_STANDBY. They may
517 * be able to use wakeup events to exit from runtime low-power states,
518 * or from system low-power states such as standby or suspend-to-RAM.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519 */
520
Rafael J. Wysocki296699d2007-07-29 23:27:18 +0200521#ifdef CONFIG_PM_SLEEP
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200522extern void device_pm_lock(void);
Rafael J. Wysocki770824b2009-02-22 18:38:50 +0100523extern int sysdev_resume(void);
Alan Sternd1616302009-05-24 22:05:42 +0200524extern void dpm_resume_noirq(pm_message_t state);
525extern void dpm_resume_end(pm_message_t state);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200526
527extern void device_pm_unlock(void);
Rafael J. Wysocki770824b2009-02-22 18:38:50 +0100528extern int sysdev_suspend(pm_message_t state);
Alan Sternd1616302009-05-24 22:05:42 +0200529extern int dpm_suspend_noirq(pm_message_t state);
530extern int dpm_suspend_start(pm_message_t state);
David Brownell0ac85242005-09-12 19:39:34 -0700531
Andrew Morton02669492006-03-23 01:38:34 -0800532extern void __suspend_report_result(const char *function, void *fn, int ret);
533
534#define suspend_report_result(fn, ret) \
535 do { \
Harvey Harrisond5c003b2008-10-15 22:01:24 -0700536 __suspend_report_result(__func__, fn, ret); \
Andrew Morton02669492006-03-23 01:38:34 -0800537 } while (0)
Andrew Morton9a7834d2005-10-23 23:02:20 -0700538
Rafael J. Wysocki098dff72010-09-22 22:10:57 +0200539extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
Alan Sternd288e472008-03-19 22:37:42 +0100540#else /* !CONFIG_PM_SLEEP */
541
Cornelia Huckffa6a702009-03-04 12:44:00 +0100542#define device_pm_lock() do {} while (0)
543#define device_pm_unlock() do {} while (0)
544
Alan Sternd1616302009-05-24 22:05:42 +0200545static inline int dpm_suspend_start(pm_message_t state)
Alan Sternd288e472008-03-19 22:37:42 +0100546{
547 return 0;
548}
549
Alan Stern9a3df1f2008-03-19 22:39:13 +0100550#define suspend_report_result(fn, ret) do {} while (0)
Alan Sternd288e472008-03-19 22:37:42 +0100551
Rafael J. Wysocki098dff72010-09-22 22:10:57 +0200552static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
553{
554 return 0;
555}
Alan Sternd288e472008-03-19 22:37:42 +0100556#endif /* !CONFIG_PM_SLEEP */
557
Cornelia Huckffa6a702009-03-04 12:44:00 +0100558/* How to reorder dpm_list after device_move() */
559enum dpm_order {
560 DPM_ORDER_NONE,
561 DPM_ORDER_DEV_AFTER_PARENT,
562 DPM_ORDER_PARENT_BEFORE_DEV,
563 DPM_ORDER_DEV_LAST,
564};
565
Len Brown9f9adec2007-12-13 17:38:03 -0500566/*
567 * Global Power Management flags
568 * Used to keep APM and ACPI from both being active
569 */
570extern unsigned int pm_flags;
571
572#define PM_APM 1
573#define PM_ACPI 2
574
Mark Brown62bcb912010-12-24 15:04:41 +0100575extern int pm_generic_suspend(struct device *dev);
576extern int pm_generic_resume(struct device *dev);
577extern int pm_generic_freeze(struct device *dev);
578extern int pm_generic_thaw(struct device *dev);
579extern int pm_generic_restore(struct device *dev);
580extern int pm_generic_poweroff(struct device *dev);
581
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582#endif /* _LINUX_PM_H */