blob: a579a0f258402c0096bc8bdb562d4e1b501fe3fb [file] [log] [blame]
Ivan Khoronzhuk5a7c8152014-02-24 19:26:11 +02001/*
2 * TI AEMIF driver
3 *
4 * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
5 *
6 * Authors:
7 * Murali Karicheri <m-karicheri2@ti.com>
8 * Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/clk.h>
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/of_platform.h>
22#include <linux/platform_device.h>
23
24#define TA_SHIFT 2
25#define RHOLD_SHIFT 4
26#define RSTROBE_SHIFT 7
27#define RSETUP_SHIFT 13
28#define WHOLD_SHIFT 17
29#define WSTROBE_SHIFT 20
30#define WSETUP_SHIFT 26
31#define EW_SHIFT 30
32#define SS_SHIFT 31
33
34#define TA(x) ((x) << TA_SHIFT)
35#define RHOLD(x) ((x) << RHOLD_SHIFT)
36#define RSTROBE(x) ((x) << RSTROBE_SHIFT)
37#define RSETUP(x) ((x) << RSETUP_SHIFT)
38#define WHOLD(x) ((x) << WHOLD_SHIFT)
39#define WSTROBE(x) ((x) << WSTROBE_SHIFT)
40#define WSETUP(x) ((x) << WSETUP_SHIFT)
41#define EW(x) ((x) << EW_SHIFT)
42#define SS(x) ((x) << SS_SHIFT)
43
44#define ASIZE_MAX 0x1
45#define TA_MAX 0x3
46#define RHOLD_MAX 0x7
47#define RSTROBE_MAX 0x3f
48#define RSETUP_MAX 0xf
49#define WHOLD_MAX 0x7
50#define WSTROBE_MAX 0x3f
51#define WSETUP_MAX 0xf
52#define EW_MAX 0x1
53#define SS_MAX 0x1
54#define NUM_CS 4
55
56#define TA_VAL(x) (((x) & TA(TA_MAX)) >> TA_SHIFT)
57#define RHOLD_VAL(x) (((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT)
58#define RSTROBE_VAL(x) (((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT)
59#define RSETUP_VAL(x) (((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT)
60#define WHOLD_VAL(x) (((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT)
61#define WSTROBE_VAL(x) (((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
62#define WSETUP_VAL(x) (((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
63#define EW_VAL(x) (((x) & EW(EW_MAX)) >> EW_SHIFT)
64#define SS_VAL(x) (((x) & SS(SS_MAX)) >> SS_SHIFT)
65
66#define NRCSR_OFFSET 0x00
67#define AWCCR_OFFSET 0x04
68#define A1CR_OFFSET 0x10
69
70#define ACR_ASIZE_MASK 0x3
71#define ACR_EW_MASK BIT(30)
72#define ACR_SS_MASK BIT(31)
73#define ASIZE_16BIT 1
74
75#define CONFIG_MASK (TA(TA_MAX) | \
76 RHOLD(RHOLD_MAX) | \
77 RSTROBE(RSTROBE_MAX) | \
78 RSETUP(RSETUP_MAX) | \
79 WHOLD(WHOLD_MAX) | \
80 WSTROBE(WSTROBE_MAX) | \
81 WSETUP(WSETUP_MAX) | \
82 EW(EW_MAX) | SS(SS_MAX) | \
83 ASIZE_MAX)
84
85/**
86 * struct aemif_cs_data: structure to hold cs parameters
87 * @cs: chip-select number
88 * @wstrobe: write strobe width, ns
89 * @rstrobe: read strobe width, ns
90 * @wsetup: write setup width, ns
91 * @whold: write hold width, ns
92 * @rsetup: read setup width, ns
93 * @rhold: read hold width, ns
94 * @ta: minimum turn around time, ns
95 * @enable_ss: enable/disable select strobe mode
96 * @enable_ew: enable/disable extended wait mode
97 * @asize: width of the asynchronous device's data bus
98 */
99struct aemif_cs_data {
100 u8 cs;
101 u16 wstrobe;
102 u16 rstrobe;
103 u8 wsetup;
104 u8 whold;
105 u8 rsetup;
106 u8 rhold;
107 u8 ta;
108 u8 enable_ss;
109 u8 enable_ew;
110 u8 asize;
111};
112
113/**
114 * struct aemif_device: structure to hold device data
115 * @base: base address of AEMIF registers
116 * @clk: source clock
117 * @clk_rate: clock's rate in kHz
118 * @num_cs: number of assigned chip-selects
119 * @cs_offset: start number of cs nodes
120 * @cs_data: array of chip-select settings
121 */
122struct aemif_device {
123 void __iomem *base;
124 struct clk *clk;
125 unsigned long clk_rate;
126 u8 num_cs;
127 int cs_offset;
128 struct aemif_cs_data cs_data[NUM_CS];
129};
130
131/**
132 * aemif_calc_rate - calculate timing data.
133 * @pdev: platform device to calculate for
134 * @wanted: The cycle time needed in nanoseconds.
135 * @clk: The input clock rate in kHz.
136 * @max: The maximum divider value that can be programmed.
137 *
138 * On success, returns the calculated timing value minus 1 for easy
139 * programming into AEMIF timing registers, else negative errno.
140 */
141static int aemif_calc_rate(struct platform_device *pdev, int wanted,
142 unsigned long clk, int max)
143{
144 int result;
145
146 result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
147
148 dev_dbg(&pdev->dev, "%s: result %d from %ld, %d\n", __func__, result,
149 clk, wanted);
150
151 /* It is generally OK to have a more relaxed timing than requested... */
152 if (result < 0)
153 result = 0;
154
155 /* ... But configuring tighter timings is not an option. */
156 else if (result > max)
157 result = -EINVAL;
158
159 return result;
160}
161
162/**
163 * aemif_config_abus - configure async bus parameters
164 * @pdev: platform device to configure for
165 * @csnum: aemif chip select number
166 *
167 * This function programs the given timing values (in real clock) into the
168 * AEMIF registers taking the AEMIF clock into account.
169 *
170 * This function does not use any locking while programming the AEMIF
171 * because it is expected that there is only one user of a given
172 * chip-select.
173 *
174 * Returns 0 on success, else negative errno.
175 */
176static int aemif_config_abus(struct platform_device *pdev, int csnum)
177{
178 struct aemif_device *aemif = platform_get_drvdata(pdev);
179 struct aemif_cs_data *data = &aemif->cs_data[csnum];
180 int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
181 unsigned long clk_rate = aemif->clk_rate;
182 unsigned offset;
183 u32 set, val;
184
185 offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
186
187 ta = aemif_calc_rate(pdev, data->ta, clk_rate, TA_MAX);
188 rhold = aemif_calc_rate(pdev, data->rhold, clk_rate, RHOLD_MAX);
189 rstrobe = aemif_calc_rate(pdev, data->rstrobe, clk_rate, RSTROBE_MAX);
190 rsetup = aemif_calc_rate(pdev, data->rsetup, clk_rate, RSETUP_MAX);
191 whold = aemif_calc_rate(pdev, data->whold, clk_rate, WHOLD_MAX);
192 wstrobe = aemif_calc_rate(pdev, data->wstrobe, clk_rate, WSTROBE_MAX);
193 wsetup = aemif_calc_rate(pdev, data->wsetup, clk_rate, WSETUP_MAX);
194
195 if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
196 whold < 0 || wstrobe < 0 || wsetup < 0) {
197 dev_err(&pdev->dev, "%s: cannot get suitable timings\n",
198 __func__);
199 return -EINVAL;
200 }
201
202 set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
203 WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
204
205 set |= (data->asize & ACR_ASIZE_MASK);
206 if (data->enable_ew)
207 set |= ACR_EW_MASK;
208 if (data->enable_ss)
209 set |= ACR_SS_MASK;
210
211 val = readl(aemif->base + offset);
212 val &= ~CONFIG_MASK;
213 val |= set;
214 writel(val, aemif->base + offset);
215
216 return 0;
217}
218
219static inline int aemif_cycles_to_nsec(int val, unsigned long clk_rate)
220{
221 return ((val + 1) * NSEC_PER_MSEC) / clk_rate;
222}
223
224/**
225 * aemif_get_hw_params - function to read hw register values
226 * @pdev: platform device to read for
227 * @csnum: aemif chip select number
228 *
229 * This function reads the defaults from the registers and update
230 * the timing values. Required for get/set commands and also for
231 * the case when driver needs to use defaults in hardware.
232 */
233static void aemif_get_hw_params(struct platform_device *pdev, int csnum)
234{
235 struct aemif_device *aemif = platform_get_drvdata(pdev);
236 struct aemif_cs_data *data = &aemif->cs_data[csnum];
237 unsigned long clk_rate = aemif->clk_rate;
238 u32 val, offset;
239
240 offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
241 val = readl(aemif->base + offset);
242
243 data->ta = aemif_cycles_to_nsec(TA_VAL(val), clk_rate);
244 data->rhold = aemif_cycles_to_nsec(RHOLD_VAL(val), clk_rate);
245 data->rstrobe = aemif_cycles_to_nsec(RSTROBE_VAL(val), clk_rate);
246 data->rsetup = aemif_cycles_to_nsec(RSETUP_VAL(val), clk_rate);
247 data->whold = aemif_cycles_to_nsec(WHOLD_VAL(val), clk_rate);
248 data->wstrobe = aemif_cycles_to_nsec(WSTROBE_VAL(val), clk_rate);
249 data->wsetup = aemif_cycles_to_nsec(WSETUP_VAL(val), clk_rate);
250 data->enable_ew = EW_VAL(val);
251 data->enable_ss = SS_VAL(val);
252 data->asize = val & ASIZE_MAX;
253}
254
255/**
256 * of_aemif_parse_abus_config - parse CS configuration from DT
257 * @pdev: platform device to parse for
258 * @np: device node ptr
259 *
260 * This function update the emif async bus configuration based on the values
261 * configured in a cs device binding node.
262 */
263static int of_aemif_parse_abus_config(struct platform_device *pdev,
264 struct device_node *np)
265{
266 struct aemif_device *aemif = platform_get_drvdata(pdev);
267 struct aemif_cs_data *data;
268 u32 cs;
269 u32 val;
270
271 if (of_property_read_u32(np, "ti,cs-chipselect", &cs)) {
272 dev_dbg(&pdev->dev, "cs property is required");
273 return -EINVAL;
274 }
275
276 if (cs - aemif->cs_offset >= NUM_CS || cs < aemif->cs_offset) {
277 dev_dbg(&pdev->dev, "cs number is incorrect %d", cs);
278 return -EINVAL;
279 }
280
281 if (aemif->num_cs >= NUM_CS) {
282 dev_dbg(&pdev->dev, "cs count is more than %d", NUM_CS);
283 return -EINVAL;
284 }
285
286 data = &aemif->cs_data[aemif->num_cs];
287 data->cs = cs;
288
289 /* read the current value in the hw register */
290 aemif_get_hw_params(pdev, aemif->num_cs++);
291
292 /* override the values from device node */
293 if (!of_property_read_u32(np, "ti,cs-min-turnaround-ns", &val))
294 data->ta = val;
295
296 if (!of_property_read_u32(np, "ti,cs-read-hold-ns", &val))
297 data->rhold = val;
298
299 if (!of_property_read_u32(np, "ti,cs-read-strobe-ns", &val))
300 data->rstrobe = val;
301
302 if (!of_property_read_u32(np, "ti,cs-read-setup-ns", &val))
303 data->rsetup = val;
304
305 if (!of_property_read_u32(np, "ti,cs-write-hold-ns", &val))
306 data->whold = val;
307
308 if (!of_property_read_u32(np, "ti,cs-write-strobe-ns", &val))
309 data->wstrobe = val;
310
311 if (!of_property_read_u32(np, "ti,cs-write-setup-ns", &val))
312 data->wsetup = val;
313
314 if (!of_property_read_u32(np, "ti,cs-bus-width", &val))
315 if (val == 16)
316 data->asize = 1;
317 data->enable_ew = of_property_read_bool(np, "ti,cs-extended-wait-mode");
318 data->enable_ss = of_property_read_bool(np, "ti,cs-select-strobe-mode");
319 return 0;
320}
321
322static const struct of_device_id aemif_of_match[] = {
323 { .compatible = "ti,davinci-aemif", },
324 { .compatible = "ti,da850-aemif", },
325 {},
326};
Luis de Bethencourtdf6be792015-10-04 17:23:49 +0100327MODULE_DEVICE_TABLE(of, aemif_of_match);
Ivan Khoronzhuk5a7c8152014-02-24 19:26:11 +0200328
329static int aemif_probe(struct platform_device *pdev)
330{
331 int i;
332 int ret = -ENODEV;
333 struct resource *res;
334 struct device *dev = &pdev->dev;
335 struct device_node *np = dev->of_node;
336 struct device_node *child_np;
337 struct aemif_device *aemif;
338
339 if (np == NULL)
340 return 0;
341
342 aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
343 if (!aemif)
344 return -ENOMEM;
345
346 platform_set_drvdata(pdev, aemif);
347
348 aemif->clk = devm_clk_get(dev, NULL);
349 if (IS_ERR(aemif->clk)) {
350 dev_err(dev, "cannot get clock 'aemif'\n");
351 return PTR_ERR(aemif->clk);
352 }
353
354 clk_prepare_enable(aemif->clk);
355 aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
356
357 if (of_device_is_compatible(np, "ti,da850-aemif"))
358 aemif->cs_offset = 2;
359
360 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
361 aemif->base = devm_ioremap_resource(dev, res);
362 if (IS_ERR(aemif->base)) {
363 ret = PTR_ERR(aemif->base);
364 goto error;
365 }
366
367 /*
368 * For every controller device node, there is a cs device node that
369 * describe the bus configuration parameters. This functions iterate
370 * over these nodes and update the cs data array.
371 */
372 for_each_available_child_of_node(np, child_np) {
373 ret = of_aemif_parse_abus_config(pdev, child_np);
374 if (ret < 0)
375 goto error;
376 }
377
378 for (i = 0; i < aemif->num_cs; i++) {
379 ret = aemif_config_abus(pdev, i);
380 if (ret < 0) {
381 dev_err(dev, "Error configuring chip select %d\n",
382 aemif->cs_data[i].cs);
383 goto error;
384 }
385 }
386
387 /*
388 * Create a child devices explicitly from here to
389 * guarantee that the child will be probed after the AEMIF timing
390 * parameters are set.
391 */
392 for_each_available_child_of_node(np, child_np) {
393 ret = of_platform_populate(child_np, NULL, NULL, dev);
394 if (ret < 0)
395 goto error;
396 }
397
398 return 0;
399error:
400 clk_disable_unprepare(aemif->clk);
401 return ret;
402}
403
404static int aemif_remove(struct platform_device *pdev)
405{
406 struct aemif_device *aemif = platform_get_drvdata(pdev);
407
408 clk_disable_unprepare(aemif->clk);
409 return 0;
410}
411
412static struct platform_driver aemif_driver = {
413 .probe = aemif_probe,
414 .remove = aemif_remove,
415 .driver = {
416 .name = KBUILD_MODNAME,
Ivan Khoronzhuk5a7c8152014-02-24 19:26:11 +0200417 .of_match_table = of_match_ptr(aemif_of_match),
418 },
419};
420
421module_platform_driver(aemif_driver);
422
423MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
424MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
425MODULE_DESCRIPTION("Texas Instruments AEMIF driver");
426MODULE_LICENSE("GPL v2");
427MODULE_ALIAS("platform:" KBUILD_MODNAME);