blob: 02901c54b08be400d75afaf9d48816cb7346fddf [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/******************************************************************************
2** Device driver for the PCI-SCSI NCR538XX controller family.
3**
4** Copyright (C) 1994 Wolfgang Stanglmeier
Matthew Wilcox19c65092005-12-16 12:50:53 -05005** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
Linus Torvalds1da177e2005-04-16 15:20:36 -07006**
7** This program is free software; you can redistribute it and/or modify
8** it under the terms of the GNU General Public License as published by
9** the Free Software Foundation; either version 2 of the License, or
10** (at your option) any later version.
11**
12** This program is distributed in the hope that it will be useful,
13** but WITHOUT ANY WARRANTY; without even the implied warranty of
14** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15** GNU General Public License for more details.
16**
17** You should have received a copy of the GNU General Public License
18** along with this program; if not, write to the Free Software
19** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20**
21**-----------------------------------------------------------------------------
22**
23** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
24** and is currently maintained by
25**
26** Gerard Roudier <groudier@free.fr>
27**
28** Being given that this driver originates from the FreeBSD version, and
29** in order to keep synergy on both, any suggested enhancements and corrections
30** received on Linux are automatically a potential candidate for the FreeBSD
31** version.
32**
33** The original driver has been written for 386bsd and FreeBSD by
34** Wolfgang Stanglmeier <wolf@cologne.de>
35** Stefan Esser <se@mi.Uni-Koeln.de>
36**
37** And has been ported to NetBSD by
38** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
39**
Matthew Wilcox19c65092005-12-16 12:50:53 -050040** NVRAM detection and reading.
41** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
42**
43** Added support for MIPS big endian systems.
44** Carsten Langgaard, carstenl@mips.com
45** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
46**
47** Added support for HP PARISC big endian systems.
48** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
49**
Linus Torvalds1da177e2005-04-16 15:20:36 -070050*******************************************************************************
51*/
52
53#ifndef NCR53C8XX_H
54#define NCR53C8XX_H
55
56#include <scsi/scsi_host.h>
57
Matthew Wilcoxb0dc1db2006-02-17 13:18:41 -070058
Matthew Wilcox19c65092005-12-16 12:50:53 -050059/*
Matthew Wilcoxb0dc1db2006-02-17 13:18:41 -070060** If you want a driver as small as possible, donnot define the
Matthew Wilcox19c65092005-12-16 12:50:53 -050061** following options.
62*/
63#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
64#define SCSI_NCR_DEBUG_INFO_SUPPORT
65
66/*
67** To disable integrity checking, do not define the
68** following option.
69*/
70#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
71# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
72#endif
73
74/* ---------------------------------------------------------------------
75** Take into account kernel configured parameters.
76** Most of these options can be overridden at startup by a command line.
77** ---------------------------------------------------------------------
78*/
79
80/*
81 * For Ultra2 and Ultra3 SCSI support option, use special features.
82 *
83 * Value (default) means:
84 * bit 0 : all features enabled, except:
85 * bit 1 : PCI Write And Invalidate.
86 * bit 2 : Data Phase Mismatch handling from SCRIPTS.
87 *
88 * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
89 * enabled by the driver.
90 */
91#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
92
93#define SCSI_NCR_MAX_SYNC (80)
94
95/*
96 * Allow tags from 2 to 256, default 8
97 */
98#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
99#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
100#define SCSI_NCR_MAX_TAGS (2)
101#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
102#define SCSI_NCR_MAX_TAGS (256)
103#else
104#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
105#endif
106#else
107#define SCSI_NCR_MAX_TAGS (8)
108#endif
109
110/*
111 * Allow tagged command queuing support if configured with default number
112 * of tags set to max (see above).
113 */
114#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
115#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
116#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
117#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
118#else
119#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
120#endif
121
122/*
123 * Immediate arbitration
124 */
125#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
126#define SCSI_NCR_IARB_SUPPORT
127#endif
128
129/*
130 * Sync transfer frequency at startup.
131 * Allow from 5Mhz to 80Mhz default 20 Mhz.
132 */
133#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
134#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
135#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
136#undef CONFIG_SCSI_NCR53C8XX_SYNC
137#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
138#endif
139
140#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
141#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
142#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
143#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
144#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
145#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
146#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
147#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
148#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
149#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
150#else
151#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
152#endif
153
154/*
155 * Disallow disconnections at boot-up
156 */
157#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
158#define SCSI_NCR_SETUP_DISCONNECTION (0)
159#else
160#define SCSI_NCR_SETUP_DISCONNECTION (1)
161#endif
162
163/*
164 * Force synchronous negotiation for all targets
165 */
166#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
167#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
168#else
169#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
170#endif
171
172/*
173 * Disable master parity checking (flawed hardwares need that)
174 */
175#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
176#define SCSI_NCR_SETUP_MASTER_PARITY (0)
177#else
178#define SCSI_NCR_SETUP_MASTER_PARITY (1)
179#endif
180
181/*
182 * Disable scsi parity checking (flawed devices may need that)
183 */
184#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
185#define SCSI_NCR_SETUP_SCSI_PARITY (0)
186#else
187#define SCSI_NCR_SETUP_SCSI_PARITY (1)
188#endif
189
190/*
191 * Settle time after reset at boot-up
192 */
193#define SCSI_NCR_SETUP_SETTLE_TIME (2)
194
195/*
196** Bridge quirks work-around option defaulted to 1.
197*/
198#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
199#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
200#endif
201
202/*
203** Work-around common bridge misbehaviour.
204**
205** - Do not flush posted writes in the opposite
206** direction on read.
207** - May reorder DMA writes to memory.
208**
209** This option should not affect performances
210** significantly, so it is the default.
211*/
212#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
213#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
214#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
215#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
216
217/*
218** Same as option 1, but also deal with
219** misconfigured interrupts.
220**
Matt LaPlante0779bf22006-11-30 05:24:39 +0100221** - Edge triggered instead of level sensitive.
Matthew Wilcox19c65092005-12-16 12:50:53 -0500222** - No interrupt line connected.
223** - IRQ number misconfigured.
224**
225** If no interrupt is delivered, the driver will
226** catch the interrupt conditions 10 times per
227** second. No need to say that this option is
228** not recommended.
229*/
230#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
231#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
232#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
233#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
234#define SCSI_NCR_PCIQ_BROKEN_INTR
235
236/*
237** Some bridge designers decided to flush
238** everything prior to deliver the interrupt.
239** This option tries to deal with such a
240** behaviour.
241*/
242#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
243#define SCSI_NCR_PCIQ_SYNC_ON_INTR
244#endif
245
246/*
247** Other parameters not configurable with "make config"
248** Avoid to change these constants, unless you know what you are doing.
249*/
250
251#define SCSI_NCR_ALWAYS_SIMPLE_TAG
252#define SCSI_NCR_MAX_SCATTER (127)
253#define SCSI_NCR_MAX_TARGET (16)
254
255/*
256** Compute some desirable value for CAN_QUEUE
257** and CMD_PER_LUN.
258** The driver will use lower values if these
259** ones appear to be too large.
260*/
261#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
262#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
263
264#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
265#define SCSI_NCR_TIMER_INTERVAL (HZ)
266
Matthew Wilcox19c65092005-12-16 12:50:53 -0500267#define SCSI_NCR_MAX_LUN (16)
Matthew Wilcox19c65092005-12-16 12:50:53 -0500268
269/*
270 * IO functions definition for big/little endian CPU support.
271 * For now, the NCR is only supported in little endian addressing mode,
272 */
273
274#ifdef __BIG_ENDIAN
275
276#define inw_l2b inw
277#define inl_l2b inl
278#define outw_b2l outw
279#define outl_b2l outl
280
281#define readb_raw readb
282#define writeb_raw writeb
283
284#if defined(SCSI_NCR_BIG_ENDIAN)
285#define readw_l2b __raw_readw
286#define readl_l2b __raw_readl
287#define writew_b2l __raw_writew
288#define writel_b2l __raw_writel
289#define readw_raw __raw_readw
290#define readl_raw __raw_readl
291#define writew_raw __raw_writew
292#define writel_raw __raw_writel
293#else /* Other big-endian */
294#define readw_l2b readw
295#define readl_l2b readl
296#define writew_b2l writew
297#define writel_b2l writel
298#define readw_raw readw
299#define readl_raw readl
300#define writew_raw writew
301#define writel_raw writel
302#endif
303
304#else /* little endian */
305
306#define inw_raw inw
307#define inl_raw inl
308#define outw_raw outw
309#define outl_raw outl
310
311#define readb_raw readb
312#define readw_raw readw
313#define readl_raw readl
314#define writeb_raw writeb
315#define writew_raw writew
316#define writel_raw writel
317
318#endif
319
320#if !defined(__hppa__) && !defined(__mips__)
321#ifdef SCSI_NCR_BIG_ENDIAN
322#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
323#endif
324#endif
325
326#define MEMORY_BARRIER() mb()
327
328
329/*
330 * If the NCR uses big endian addressing mode over the
331 * PCI, actual io register addresses for byte and word
332 * accesses must be changed according to lane routing.
333 * Btw, ncr_offb() and ncr_offw() macros only apply to
334 * constants and so donnot generate bloated code.
335 */
336
337#if defined(SCSI_NCR_BIG_ENDIAN)
338
339#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
340#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
341
342#else
343
344#define ncr_offb(o) (o)
345#define ncr_offw(o) (o)
346
347#endif
348
349/*
350 * If the CPU and the NCR use same endian-ness addressing,
351 * no byte reordering is needed for script patching.
352 * Macro cpu_to_scr() is to be used for script patching.
353 * Macro scr_to_cpu() is to be used for getting a DWORD
354 * from the script.
355 */
356
357#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
358
359#define cpu_to_scr(dw) cpu_to_le32(dw)
360#define scr_to_cpu(dw) le32_to_cpu(dw)
361
362#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
363
364#define cpu_to_scr(dw) cpu_to_be32(dw)
365#define scr_to_cpu(dw) be32_to_cpu(dw)
366
367#else
368
369#define cpu_to_scr(dw) (dw)
370#define scr_to_cpu(dw) (dw)
371
372#endif
373
374/*
375 * Access to the controller chip.
376 *
377 * If the CPU and the NCR use same endian-ness addressing,
378 * no byte reordering is needed for accessing chip io
379 * registers. Functions suffixed by '_raw' are assumed
380 * to access the chip over the PCI without doing byte
381 * reordering. Functions suffixed by '_l2b' are
382 * assumed to perform little-endian to big-endian byte
383 * reordering, those suffixed by '_b2l' blah, blah,
384 * blah, ...
385 */
386
387/*
388 * MEMORY mapped IO input / output
389 */
390
391#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
392#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
393
394#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
395
396#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
397#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
398
399#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
400#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
401
402#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
403
404#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
405#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
406
407#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
408#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
409
410#else
411
412#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
413/* Only 8 or 32 bit transfers allowed */
414#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
415#else
416#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
417#endif
418#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
419
420#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
421/* Only 8 or 32 bit transfers allowed */
422#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
423#else
424#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
425#endif
426#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
427
428#endif
429
430#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
431#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
432#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
433
434#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
435#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
436#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
437
438/*
439 * Set bit field ON, OFF
440 */
441
442#define OUTONB(r, m) OUTB(r, INB(r) | (m))
443#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
444#define OUTONW(r, m) OUTW(r, INW(r) | (m))
445#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
446#define OUTONL(r, m) OUTL(r, INL(r) | (m))
447#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
448
449/*
450 * We normally want the chip to have a consistent view
451 * of driver internal data structures when we restart it.
452 * Thus these macros.
453 */
454#define OUTL_DSP(v) \
455 do { \
456 MEMORY_BARRIER(); \
457 OUTL (nc_dsp, (v)); \
458 } while (0)
459
460#define OUTONB_STD() \
461 do { \
462 MEMORY_BARRIER(); \
463 OUTONB (nc_dcntl, (STD|NOCOM)); \
464 } while (0)
465
466
467/*
468** NCR53C8XX devices features table.
469*/
470struct ncr_chip {
471 unsigned short revision_id;
472 unsigned char burst_max; /* log-base-2 of max burst */
473 unsigned char offset_max;
474 unsigned char nr_divisor;
475 unsigned int features;
476#define FE_LED0 (1<<0)
477#define FE_WIDE (1<<1) /* Wide data transfers */
478#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
479#define FE_DBLR (1<<4) /* Clock doubler present */
480#define FE_QUAD (1<<5) /* Clock quadrupler present */
481#define FE_ERL (1<<6) /* Enable read line */
482#define FE_CLSE (1<<7) /* Cache line size enable */
483#define FE_WRIE (1<<8) /* Write & Invalidate enable */
484#define FE_ERMP (1<<9) /* Enable read multiple */
485#define FE_BOF (1<<10) /* Burst opcode fetch */
486#define FE_DFS (1<<11) /* DMA fifo size */
487#define FE_PFEN (1<<12) /* Prefetch enable */
488#define FE_LDSTR (1<<13) /* Load/Store supported */
489#define FE_RAM (1<<14) /* On chip RAM present */
490#define FE_VARCLK (1<<15) /* SCSI clock may vary */
491#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
492#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
493#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
494#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
495#define FE_LEDC (1<<20) /* Hardware control of LED */
496#define FE_DIFF (1<<21) /* Support Differential SCSI */
497#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
498#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
499#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
500#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
501#define FE_EHP (1<<27) /* 720: Even host parity */
502#define FE_MUX (1<<28) /* 720: Multiplexed bus */
503#define FE_EA (1<<29) /* 720: Enable Ack */
504
505#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
506#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
507#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
508};
509
510
511/*
512** Driver setup structure.
513**
514** This structure is initialized from linux config options.
515** It can be overridden at boot-up by the boot command line.
516*/
517#define SCSI_NCR_MAX_EXCLUDES 8
518struct ncr_driver_setup {
519 u8 master_parity;
520 u8 scsi_parity;
521 u8 disconnection;
522 u8 special_features;
523 u8 force_sync_nego;
524 u8 reverse_probe;
525 u8 pci_fix_up;
526 u8 use_nvram;
527 u8 verbose;
528 u8 default_tags;
529 u16 default_sync;
530 u16 debug;
531 u8 burst_max;
532 u8 led_pin;
533 u8 max_wide;
534 u8 settle_delay;
535 u8 diff_support;
536 u8 irqm;
537 u8 bus_check;
538 u8 optimize;
539 u8 recovery;
540 u8 host_id;
541 u16 iarb;
542 u32 excludes[SCSI_NCR_MAX_EXCLUDES];
543 char tag_ctrl[100];
544};
545
546/*
547** Initial setup.
Matt LaPlante0779bf22006-11-30 05:24:39 +0100548** Can be overridden at startup by a command line.
Matthew Wilcox19c65092005-12-16 12:50:53 -0500549*/
550#define SCSI_NCR_DRIVER_SETUP \
551{ \
552 SCSI_NCR_SETUP_MASTER_PARITY, \
553 SCSI_NCR_SETUP_SCSI_PARITY, \
554 SCSI_NCR_SETUP_DISCONNECTION, \
555 SCSI_NCR_SETUP_SPECIAL_FEATURES, \
556 SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
557 0, \
558 0, \
559 1, \
560 0, \
561 SCSI_NCR_SETUP_DEFAULT_TAGS, \
562 SCSI_NCR_SETUP_DEFAULT_SYNC, \
563 0x00, \
564 7, \
565 0, \
566 1, \
567 SCSI_NCR_SETUP_SETTLE_TIME, \
568 0, \
569 0, \
570 1, \
571 0, \
572 0, \
573 255, \
574 0x00 \
575}
576
577/*
578** Boot fail safe setup.
579** Override initial setup from boot command line:
580** ncr53c8xx=safe:y
581*/
582#define SCSI_NCR_DRIVER_SAFE_SETUP \
583{ \
584 0, \
585 1, \
586 0, \
587 0, \
588 0, \
589 0, \
590 0, \
591 1, \
592 2, \
593 0, \
594 255, \
595 0x00, \
596 255, \
597 0, \
598 0, \
599 10, \
600 1, \
601 1, \
602 1, \
603 0, \
604 0, \
605 255 \
606}
607
608/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
609
610/*-----------------------------------------------------------------
611**
612** The ncr 53c810 register structure.
613**
614**-----------------------------------------------------------------
615*/
616
617struct ncr_reg {
618/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
619
620/*01*/ u8 nc_scntl1; /* no reset */
621 #define ISCON 0x10 /* connected to scsi */
622 #define CRST 0x08 /* force reset */
623 #define IARB 0x02 /* immediate arbitration */
624
625/*02*/ u8 nc_scntl2; /* no disconnect expected */
626 #define SDU 0x80 /* cmd: disconnect will raise error */
627 #define CHM 0x40 /* sta: chained mode */
628 #define WSS 0x08 /* sta: wide scsi send [W]*/
629 #define WSR 0x01 /* sta: wide scsi received [W]*/
630
631/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
632 #define EWS 0x08 /* cmd: enable wide scsi [W]*/
633 #define ULTRA 0x80 /* cmd: ULTRA enable */
634 /* bits 0-2, 7 rsvd for C1010 */
635
636/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
637 #define RRE 0x40 /* r/w:e enable response to resel. */
638 #define SRE 0x20 /* r/w:e enable response to select */
639
640/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
641 /* bits 6-7 rsvd for C1010 */
642
643/*06*/ u8 nc_sdid; /* ### Destination-ID */
644
645/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
646
647/*08*/ u8 nc_sfbr; /* ### First byte in phase */
648
649/*09*/ u8 nc_socl;
650 #define CREQ 0x80 /* r/w: SCSI-REQ */
651 #define CACK 0x40 /* r/w: SCSI-ACK */
652 #define CBSY 0x20 /* r/w: SCSI-BSY */
653 #define CSEL 0x10 /* r/w: SCSI-SEL */
654 #define CATN 0x08 /* r/w: SCSI-ATN */
655 #define CMSG 0x04 /* r/w: SCSI-MSG */
656 #define CC_D 0x02 /* r/w: SCSI-C_D */
657 #define CI_O 0x01 /* r/w: SCSI-I_O */
658
659/*0a*/ u8 nc_ssid;
660
661/*0b*/ u8 nc_sbcl;
662
663/*0c*/ u8 nc_dstat;
664 #define DFE 0x80 /* sta: dma fifo empty */
665 #define MDPE 0x40 /* int: master data parity error */
666 #define BF 0x20 /* int: script: bus fault */
667 #define ABRT 0x10 /* int: script: command aborted */
668 #define SSI 0x08 /* int: script: single step */
669 #define SIR 0x04 /* int: script: interrupt instruct. */
670 #define IID 0x01 /* int: script: illegal instruct. */
671
672/*0d*/ u8 nc_sstat0;
673 #define ILF 0x80 /* sta: data in SIDL register lsb */
674 #define ORF 0x40 /* sta: data in SODR register lsb */
675 #define OLF 0x20 /* sta: data in SODL register lsb */
676 #define AIP 0x10 /* sta: arbitration in progress */
677 #define LOA 0x08 /* sta: arbitration lost */
678 #define WOA 0x04 /* sta: arbitration won */
679 #define IRST 0x02 /* sta: scsi reset signal */
680 #define SDP 0x01 /* sta: scsi parity signal */
681
682/*0e*/ u8 nc_sstat1;
683 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
684
685/*0f*/ u8 nc_sstat2;
686 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
687 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
688 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
689 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
690 #define LDSC 0x02 /* sta: disconnect & reconnect */
691
692/*10*/ u8 nc_dsa; /* --> Base page */
693/*11*/ u8 nc_dsa1;
694/*12*/ u8 nc_dsa2;
695/*13*/ u8 nc_dsa3;
696
697/*14*/ u8 nc_istat; /* --> Main Command and status */
698 #define CABRT 0x80 /* cmd: abort current operation */
699 #define SRST 0x40 /* mod: reset chip */
700 #define SIGP 0x20 /* r/w: message from host to ncr */
701 #define SEM 0x10 /* r/w: message between host + ncr */
702 #define CON 0x08 /* sta: connected to scsi */
703 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
704 #define SIP 0x02 /* sta: scsi-interrupt */
705 #define DIP 0x01 /* sta: host/script interrupt */
706
707/*15*/ u8 nc_istat1; /* 896 and later cores only */
708 #define FLSH 0x04 /* sta: chip is flushing */
709 #define SRUN 0x02 /* sta: scripts are running */
710 #define SIRQD 0x01 /* r/w: disable INT pin */
711
712/*16*/ u8 nc_mbox0; /* 896 and later cores only */
713/*17*/ u8 nc_mbox1; /* 896 and later cores only */
714
715/*18*/ u8 nc_ctest0;
716 #define EHP 0x04 /* 720 even host parity */
717/*19*/ u8 nc_ctest1;
718
719/*1a*/ u8 nc_ctest2;
720 #define CSIGP 0x40
721 /* bits 0-2,7 rsvd for C1010 */
722
723/*1b*/ u8 nc_ctest3;
724 #define FLF 0x08 /* cmd: flush dma fifo */
725 #define CLF 0x04 /* cmd: clear dma fifo */
726 #define FM 0x02 /* mod: fetch pin mode */
727 #define WRIE 0x01 /* mod: write and invalidate enable */
728 /* bits 4-7 rsvd for C1010 */
729
730/*1c*/ u32 nc_temp; /* ### Temporary stack */
731
732/*20*/ u8 nc_dfifo;
733/*21*/ u8 nc_ctest4;
734 #define MUX 0x80 /* 720 host bus multiplex mode */
735 #define BDIS 0x80 /* mod: burst disable */
736 #define MPEE 0x08 /* mod: master parity error enable */
737
738/*22*/ u8 nc_ctest5;
739 #define DFS 0x20 /* mod: dma fifo size */
740 /* bits 0-1, 3-7 rsvd for C1010 */
741/*23*/ u8 nc_ctest6;
742
743/*24*/ u32 nc_dbc; /* ### Byte count and command */
744/*28*/ u32 nc_dnad; /* ### Next command register */
745/*2c*/ u32 nc_dsp; /* --> Script Pointer */
746/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
747
748/*34*/ u8 nc_scratcha; /* Temporary register a */
749/*35*/ u8 nc_scratcha1;
750/*36*/ u8 nc_scratcha2;
751/*37*/ u8 nc_scratcha3;
752
753/*38*/ u8 nc_dmode;
754 #define BL_2 0x80 /* mod: burst length shift value +2 */
755 #define BL_1 0x40 /* mod: burst length shift value +1 */
756 #define ERL 0x08 /* mod: enable read line */
757 #define ERMP 0x04 /* mod: enable read multiple */
758 #define BOF 0x02 /* mod: burst op code fetch */
759
760/*39*/ u8 nc_dien;
761/*3a*/ u8 nc_sbr;
762
763/*3b*/ u8 nc_dcntl; /* --> Script execution control */
764 #define CLSE 0x80 /* mod: cache line size enable */
765 #define PFF 0x40 /* cmd: pre-fetch flush */
766 #define PFEN 0x20 /* mod: pre-fetch enable */
767 #define EA 0x20 /* mod: 720 enable-ack */
768 #define SSM 0x10 /* mod: single step mode */
769 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
770 #define STD 0x04 /* cmd: start dma mode */
771 #define IRQD 0x02 /* mod: irq disable */
772 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
773 /* bits 0-1 rsvd for C1010 */
774
775/*3c*/ u32 nc_adder;
776
777/*40*/ u16 nc_sien; /* -->: interrupt enable */
778/*42*/ u16 nc_sist; /* <--: interrupt status */
779 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
780 #define STO 0x0400/* sta: timeout (select) */
781 #define GEN 0x0200/* sta: timeout (general) */
782 #define HTH 0x0100/* sta: timeout (handshake) */
783 #define MA 0x80 /* sta: phase mismatch */
784 #define CMP 0x40 /* sta: arbitration complete */
785 #define SEL 0x20 /* sta: selected by another device */
786 #define RSL 0x10 /* sta: reselected by another device*/
787 #define SGE 0x08 /* sta: gross error (over/underflow)*/
788 #define UDC 0x04 /* sta: unexpected disconnect */
789 #define RST 0x02 /* sta: scsi bus reset detected */
790 #define PAR 0x01 /* sta: scsi parity error */
791
792/*44*/ u8 nc_slpar;
793/*45*/ u8 nc_swide;
794/*46*/ u8 nc_macntl;
795/*47*/ u8 nc_gpcntl;
796/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
797/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
798/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
799
800/*4c*/ u8 nc_stest0;
801
802/*4d*/ u8 nc_stest1;
803 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
804 #define DBLEN 0x08 /* clock doubler running */
805 #define DBLSEL 0x04 /* clock doubler selected */
806
807
808/*4e*/ u8 nc_stest2;
809 #define ROF 0x40 /* reset scsi offset (after gross error!) */
810 #define DIF 0x20 /* 720 SCSI differential mode */
811 #define EXT 0x02 /* extended filtering */
812
813/*4f*/ u8 nc_stest3;
814 #define TE 0x80 /* c: tolerAnt enable */
815 #define HSC 0x20 /* c: Halt SCSI Clock */
816 #define CSF 0x02 /* c: clear scsi fifo */
817
818/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
819/*52*/ u8 nc_stest4;
820 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
821 #define SMODE_HVD 0x40 /* High Voltage Differential */
822 #define SMODE_SE 0x80 /* Single Ended */
823 #define SMODE_LVD 0xc0 /* Low Voltage Differential */
824 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
825 /* bits 0-5 rsvd for C1010 */
826
827/*53*/ u8 nc_53_;
828/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
829/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
830 #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
831 #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
832 #define ENNDJ 0x20 /* Enable Non Data PM Jump */
833 #define DISFC 0x10 /* Disable Auto FIFO Clear */
834 #define DILS 0x02 /* Disable Internal Load/Store */
835 #define DPR 0x01 /* Disable Pipe Req */
836
837/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
838 #define ZMOD 0x80 /* High Impedance Mode */
839 #define DIC 0x10 /* Disable Internal Cycles */
840 #define DDAC 0x08 /* Disable Dual Address Cycle */
841 #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
842 #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
843 #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
844
845/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
846/*5a*/ u16 nc_5a_;
847
848/*5c*/ u8 nc_scr0; /* Working register B */
849/*5d*/ u8 nc_scr1; /* */
850/*5e*/ u8 nc_scr2; /* */
851/*5f*/ u8 nc_scr3; /* */
852
853/*60*/ u8 nc_scrx[64]; /* Working register C-R */
854/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
855/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
856/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
857/*ac*/ u32 nc_drs; /* DSA Relative Selector */
858/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
859/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
860/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
861/*bc*/ u16 nc_scntl4; /* C1010 only */
862 #define U3EN 0x80 /* Enable Ultra 3 */
863 #define AIPEN 0x40 /* Allow check upper byte lanes */
864 #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
865 transfer edge */
866 #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
867 transfer edge */
868
869/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
870/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
871
872/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
873/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
874/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
875/*c9*/ u8 nc_rbc1; /* */
876/*ca*/ u8 nc_rbc2; /* */
877/*cb*/ u8 nc_rbc3; /* */
878
879/*cc*/ u8 nc_ua; /* Updated Address */
880/*cd*/ u8 nc_ua1; /* */
881/*ce*/ u8 nc_ua2; /* */
882/*cf*/ u8 nc_ua3; /* */
883/*d0*/ u32 nc_esa; /* Entry Storage Address */
884/*d4*/ u8 nc_ia; /* Instruction Address */
885/*d5*/ u8 nc_ia1;
886/*d6*/ u8 nc_ia2;
887/*d7*/ u8 nc_ia3;
888/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
889/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
890
891 /* Following for C1010 only */
892/*e0*/ u16 nc_crcpad; /* CRC Value */
893/*e2*/ u8 nc_crccntl0; /* CRC control register */
894 #define SNDCRC 0x10 /* Send CRC Request */
895/*e3*/ u8 nc_crccntl1; /* CRC control register */
896/*e4*/ u32 nc_crcdata; /* CRC data register */
897/*e8*/ u32 nc_e8_; /* rsvd */
898/*ec*/ u32 nc_ec_; /* rsvd */
899/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
900
901};
902
903/*-----------------------------------------------------------
904**
905** Utility macros for the script.
906**
907**-----------------------------------------------------------
908*/
909
910#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
911#define REG(r) REGJ (nc_, r)
912
913typedef u32 ncrcmd;
914
915/*-----------------------------------------------------------
916**
917** SCSI phases
918**
919** DT phases illegal for ncr driver.
920**
921**-----------------------------------------------------------
922*/
923
924#define SCR_DATA_OUT 0x00000000
925#define SCR_DATA_IN 0x01000000
926#define SCR_COMMAND 0x02000000
927#define SCR_STATUS 0x03000000
928#define SCR_DT_DATA_OUT 0x04000000
929#define SCR_DT_DATA_IN 0x05000000
930#define SCR_MSG_OUT 0x06000000
931#define SCR_MSG_IN 0x07000000
932
933#define SCR_ILG_OUT 0x04000000
934#define SCR_ILG_IN 0x05000000
935
936/*-----------------------------------------------------------
937**
938** Data transfer via SCSI.
939**
940**-----------------------------------------------------------
941**
942** MOVE_ABS (LEN)
943** <<start address>>
944**
945** MOVE_IND (LEN)
946** <<dnad_offset>>
947**
948** MOVE_TBL
949** <<dnad_offset>>
950**
951**-----------------------------------------------------------
952*/
953
954#define OPC_MOVE 0x08000000
955
956#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
957#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
958#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
959
960#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
961#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
962#define SCR_CHMOV_TBL (0x10000000)
963
964struct scr_tblmove {
965 u32 size;
966 u32 addr;
967};
968
969/*-----------------------------------------------------------
970**
971** Selection
972**
973**-----------------------------------------------------------
974**
975** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
976** <<alternate_address>>
977**
978** SEL_TBL | << dnad_offset>> [ | REL_JMP]
979** <<alternate_address>>
980**
981**-----------------------------------------------------------
982*/
983
984#define SCR_SEL_ABS 0x40000000
985#define SCR_SEL_ABS_ATN 0x41000000
986#define SCR_SEL_TBL 0x42000000
987#define SCR_SEL_TBL_ATN 0x43000000
988
989
990#ifdef SCSI_NCR_BIG_ENDIAN
991struct scr_tblsel {
992 u8 sel_scntl3;
993 u8 sel_id;
994 u8 sel_sxfer;
995 u8 sel_scntl4;
996};
997#else
998struct scr_tblsel {
999 u8 sel_scntl4;
1000 u8 sel_sxfer;
1001 u8 sel_id;
1002 u8 sel_scntl3;
1003};
1004#endif
1005
1006#define SCR_JMP_REL 0x04000000
1007#define SCR_ID(id) (((u32)(id)) << 16)
1008
1009/*-----------------------------------------------------------
1010**
1011** Waiting for Disconnect or Reselect
1012**
1013**-----------------------------------------------------------
1014**
1015** WAIT_DISC
1016** dummy: <<alternate_address>>
1017**
1018** WAIT_RESEL
1019** <<alternate_address>>
1020**
1021**-----------------------------------------------------------
1022*/
1023
1024#define SCR_WAIT_DISC 0x48000000
1025#define SCR_WAIT_RESEL 0x50000000
1026
1027/*-----------------------------------------------------------
1028**
1029** Bit Set / Reset
1030**
1031**-----------------------------------------------------------
1032**
1033** SET (flags {|.. })
1034**
1035** CLR (flags {|.. })
1036**
1037**-----------------------------------------------------------
1038*/
1039
1040#define SCR_SET(f) (0x58000000 | (f))
1041#define SCR_CLR(f) (0x60000000 | (f))
1042
1043#define SCR_CARRY 0x00000400
1044#define SCR_TRG 0x00000200
1045#define SCR_ACK 0x00000040
1046#define SCR_ATN 0x00000008
1047
1048
1049
1050
1051/*-----------------------------------------------------------
1052**
1053** Memory to memory move
1054**
1055**-----------------------------------------------------------
1056**
1057** COPY (bytecount)
1058** << source_address >>
1059** << destination_address >>
1060**
1061** SCR_COPY sets the NO FLUSH option by default.
1062** SCR_COPY_F does not set this option.
1063**
1064** For chips which do not support this option,
1065** ncr_copy_and_bind() will remove this bit.
1066**-----------------------------------------------------------
1067*/
1068
1069#define SCR_NO_FLUSH 0x01000000
1070
1071#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
1072#define SCR_COPY_F(n) (0xc0000000 | (n))
1073
1074/*-----------------------------------------------------------
1075**
1076** Register move and binary operations
1077**
1078**-----------------------------------------------------------
1079**
1080** SFBR_REG (reg, op, data) reg = SFBR op data
1081** << 0 >>
1082**
1083** REG_SFBR (reg, op, data) SFBR = reg op data
1084** << 0 >>
1085**
1086** REG_REG (reg, op, data) reg = reg op data
1087** << 0 >>
1088**
1089**-----------------------------------------------------------
1090** On 810A, 860, 825A, 875, 895 and 896 chips the content
1091** of SFBR register can be used as data (SCR_SFBR_DATA).
Matt LaPlante0779bf22006-11-30 05:24:39 +01001092** The 896 has additional IO registers starting at
Matthew Wilcox19c65092005-12-16 12:50:53 -05001093** offset 0x80. Bit 7 of register offset is stored in
1094** bit 7 of the SCRIPTS instruction first DWORD.
1095**-----------------------------------------------------------
1096*/
1097
1098#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
1099
1100#define SCR_SFBR_REG(reg,op,data) \
1101 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1102
1103#define SCR_REG_SFBR(reg,op,data) \
1104 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1105
1106#define SCR_REG_REG(reg,op,data) \
1107 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1108
1109
1110#define SCR_LOAD 0x00000000
1111#define SCR_SHL 0x01000000
1112#define SCR_OR 0x02000000
1113#define SCR_XOR 0x03000000
1114#define SCR_AND 0x04000000
1115#define SCR_SHR 0x05000000
1116#define SCR_ADD 0x06000000
1117#define SCR_ADDC 0x07000000
1118
1119#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
1120
1121/*-----------------------------------------------------------
1122**
1123** FROM_REG (reg) SFBR = reg
1124** << 0 >>
1125**
1126** TO_REG (reg) reg = SFBR
1127** << 0 >>
1128**
1129** LOAD_REG (reg, data) reg = <data>
1130** << 0 >>
1131**
1132** LOAD_SFBR(data) SFBR = <data>
1133** << 0 >>
1134**
1135**-----------------------------------------------------------
1136*/
1137
1138#define SCR_FROM_REG(reg) \
1139 SCR_REG_SFBR(reg,SCR_OR,0)
1140
1141#define SCR_TO_REG(reg) \
1142 SCR_SFBR_REG(reg,SCR_OR,0)
1143
1144#define SCR_LOAD_REG(reg,data) \
1145 SCR_REG_REG(reg,SCR_LOAD,data)
1146
1147#define SCR_LOAD_SFBR(data) \
1148 (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
1149
1150/*-----------------------------------------------------------
1151**
1152** LOAD from memory to register.
1153** STORE from register to memory.
1154**
1155** Only supported by 810A, 860, 825A, 875, 895 and 896.
1156**
1157**-----------------------------------------------------------
1158**
1159** LOAD_ABS (LEN)
1160** <<start address>>
1161**
1162** LOAD_REL (LEN) (DSA relative)
1163** <<dsa_offset>>
1164**
1165**-----------------------------------------------------------
1166*/
1167
1168#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
1169#define SCR_NO_FLUSH2 0x02000000
1170#define SCR_DSA_REL2 0x10000000
1171
1172#define SCR_LOAD_R(reg, how, n) \
1173 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1174
1175#define SCR_STORE_R(reg, how, n) \
1176 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1177
1178#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
1179#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
1180#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
1181#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
1182
1183#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
1184#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
1185#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
1186#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
1187
1188
1189/*-----------------------------------------------------------
1190**
1191** Waiting for Disconnect or Reselect
1192**
1193**-----------------------------------------------------------
1194**
1195** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
1196** <<address>>
1197**
1198** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
1199** <<distance>>
1200**
1201** CALL [ | IFTRUE/IFFALSE ( ... ) ]
1202** <<address>>
1203**
1204** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
1205** <<distance>>
1206**
1207** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
1208** <<dummy>>
1209**
1210** INT [ | IFTRUE/IFFALSE ( ... ) ]
1211** <<ident>>
1212**
1213** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
1214** <<ident>>
1215**
1216** Conditions:
1217** WHEN (phase)
1218** IF (phase)
1219** CARRYSET
1220** DATA (data, mask)
1221**
1222**-----------------------------------------------------------
1223*/
1224
1225#define SCR_NO_OP 0x80000000
1226#define SCR_JUMP 0x80080000
1227#define SCR_JUMP64 0x80480000
1228#define SCR_JUMPR 0x80880000
1229#define SCR_CALL 0x88080000
1230#define SCR_CALLR 0x88880000
1231#define SCR_RETURN 0x90080000
1232#define SCR_INT 0x98080000
1233#define SCR_INT_FLY 0x98180000
1234
1235#define IFFALSE(arg) (0x00080000 | (arg))
1236#define IFTRUE(arg) (0x00000000 | (arg))
1237
1238#define WHEN(phase) (0x00030000 | (phase))
1239#define IF(phase) (0x00020000 | (phase))
1240
1241#define DATA(D) (0x00040000 | ((D) & 0xff))
1242#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
1243
1244#define CARRYSET (0x00200000)
1245
1246/*-----------------------------------------------------------
1247**
1248** SCSI constants.
1249**
1250**-----------------------------------------------------------
1251*/
1252
1253/*
Matthew Wilcox19c65092005-12-16 12:50:53 -05001254** Status
1255*/
1256
1257#define S_GOOD (0x00)
1258#define S_CHECK_COND (0x02)
1259#define S_COND_MET (0x04)
1260#define S_BUSY (0x08)
1261#define S_INT (0x10)
1262#define S_INT_COND_MET (0x14)
1263#define S_CONFLICT (0x18)
1264#define S_TERMINATED (0x20)
1265#define S_QUEUE_FULL (0x28)
1266#define S_ILLEGAL (0xff)
1267#define S_SENSE (0x80)
1268
1269/*
1270 * End of ncrreg from FreeBSD
1271 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001272
1273/*
1274 Build a scatter/gather entry.
1275 see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge()
1276 implementation ;)
1277 */
1278
1279#define ncr_build_sge(np, data, badd, len) \
1280do { \
1281 (data)->addr = cpu_to_scr(badd); \
1282 (data)->size = cpu_to_scr(len); \
1283} while (0)
1284
1285/*==========================================================
1286**
1287** Structures used by the detection routine to transmit
1288** device configuration to the attach function.
1289**
1290**==========================================================
1291*/
1292struct ncr_slot {
1293 u_long base;
1294 u_long base_2;
1295 u_long base_c;
1296 u_long base_2_c;
1297 void __iomem *base_v;
1298 void __iomem *base_2_v;
1299 int irq;
1300/* port and reg fields to use INB, OUTB macros */
1301 volatile struct ncr_reg __iomem *reg;
1302};
1303
1304/*==========================================================
1305**
1306** Structure used by detection routine to save data on
1307** each detected board for attach.
1308**
1309**==========================================================
1310*/
1311struct ncr_device {
1312 struct device *dev;
1313 struct ncr_slot slot;
1314 struct ncr_chip chip;
1315 u_char host_id;
1316 u8 differential;
1317};
1318
1319extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
Matthew Wilcoxdffe8072007-08-15 12:56:56 -06001320extern void ncr53c8xx_release(struct Scsi_Host *host);
David Howells7d12e782006-10-05 14:55:46 +01001321irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001322extern int ncr53c8xx_init(void);
1323extern void ncr53c8xx_exit(void);
1324
1325#endif /* NCR53C8XX_H */