| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1 | /* | 
|  | 2 | * Serial Attached SCSI (SAS) Expander discovery and configuration | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2005 Adaptec, Inc.  All rights reserved. | 
|  | 5 | * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> | 
|  | 6 | * | 
|  | 7 | * This file is licensed under GPLv2. | 
|  | 8 | * | 
|  | 9 | * This program is free software; you can redistribute it and/or | 
|  | 10 | * modify it under the terms of the GNU General Public License as | 
|  | 11 | * published by the Free Software Foundation; either version 2 of the | 
|  | 12 | * License, or (at your option) any later version. | 
|  | 13 | * | 
|  | 14 | * This program is distributed in the hope that it will be useful, but | 
|  | 15 | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | 17 | * General Public License for more details. | 
|  | 18 | * | 
|  | 19 | * You should have received a copy of the GNU General Public License | 
|  | 20 | * along with this program; if not, write to the Free Software | 
|  | 21 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | 22 | * | 
|  | 23 | */ | 
|  | 24 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 25 | #include <linux/scatterlist.h> | 
| FUJITA Tomonori | ba1fc17 | 2007-07-09 12:52:08 +0900 | [diff] [blame] | 26 | #include <linux/blkdev.h> | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 27 |  | 
|  | 28 | #include "sas_internal.h" | 
|  | 29 |  | 
|  | 30 | #include <scsi/scsi_transport.h> | 
|  | 31 | #include <scsi/scsi_transport_sas.h> | 
|  | 32 | #include "../scsi_sas_internal.h" | 
|  | 33 |  | 
|  | 34 | static int sas_discover_expander(struct domain_device *dev); | 
|  | 35 | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); | 
|  | 36 | static int sas_configure_phy(struct domain_device *dev, int phy_id, | 
|  | 37 | u8 *sas_addr, int include); | 
|  | 38 | static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr); | 
|  | 39 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 40 | /* ---------- SMP task management ---------- */ | 
|  | 41 |  | 
|  | 42 | static void smp_task_timedout(unsigned long _task) | 
|  | 43 | { | 
|  | 44 | struct sas_task *task = (void *) _task; | 
|  | 45 | unsigned long flags; | 
|  | 46 |  | 
|  | 47 | spin_lock_irqsave(&task->task_state_lock, flags); | 
|  | 48 | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) | 
|  | 49 | task->task_state_flags |= SAS_TASK_STATE_ABORTED; | 
|  | 50 | spin_unlock_irqrestore(&task->task_state_lock, flags); | 
|  | 51 |  | 
|  | 52 | complete(&task->completion); | 
|  | 53 | } | 
|  | 54 |  | 
|  | 55 | static void smp_task_done(struct sas_task *task) | 
|  | 56 | { | 
|  | 57 | if (!del_timer(&task->timer)) | 
|  | 58 | return; | 
|  | 59 | complete(&task->completion); | 
|  | 60 | } | 
|  | 61 |  | 
|  | 62 | /* Give it some long enough timeout. In seconds. */ | 
|  | 63 | #define SMP_TIMEOUT 10 | 
|  | 64 |  | 
|  | 65 | static int smp_execute_task(struct domain_device *dev, void *req, int req_size, | 
|  | 66 | void *resp, int resp_size) | 
|  | 67 | { | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 68 | int res, retry; | 
|  | 69 | struct sas_task *task = NULL; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 70 | struct sas_internal *i = | 
|  | 71 | to_sas_internal(dev->port->ha->core.shost->transportt); | 
|  | 72 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 73 | for (retry = 0; retry < 3; retry++) { | 
|  | 74 | task = sas_alloc_task(GFP_KERNEL); | 
|  | 75 | if (!task) | 
|  | 76 | return -ENOMEM; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 77 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 78 | task->dev = dev; | 
|  | 79 | task->task_proto = dev->tproto; | 
|  | 80 | sg_init_one(&task->smp_task.smp_req, req, req_size); | 
|  | 81 | sg_init_one(&task->smp_task.smp_resp, resp, resp_size); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 82 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 83 | task->task_done = smp_task_done; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 84 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 85 | task->timer.data = (unsigned long) task; | 
|  | 86 | task->timer.function = smp_task_timedout; | 
|  | 87 | task->timer.expires = jiffies + SMP_TIMEOUT*HZ; | 
|  | 88 | add_timer(&task->timer); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 89 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 90 | res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 91 |  | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 92 | if (res) { | 
|  | 93 | del_timer(&task->timer); | 
|  | 94 | SAS_DPRINTK("executing SMP task failed:%d\n", res); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 95 | goto ex_err; | 
|  | 96 | } | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 97 |  | 
|  | 98 | wait_for_completion(&task->completion); | 
| James Bottomley | 32e8ae3 | 2007-12-30 12:37:31 -0600 | [diff] [blame] | 99 | res = -ECOMM; | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 100 | if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | 
|  | 101 | SAS_DPRINTK("smp task timed out or aborted\n"); | 
|  | 102 | i->dft->lldd_abort_task(task); | 
|  | 103 | if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | 
|  | 104 | SAS_DPRINTK("SMP task aborted and not done\n"); | 
|  | 105 | goto ex_err; | 
|  | 106 | } | 
|  | 107 | } | 
|  | 108 | if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | 109 | task->task_status.stat == SAM_GOOD) { | 
|  | 110 | res = 0; | 
|  | 111 | break; | 
| James Bottomley | 2d4b63e | 2007-12-29 11:49:53 -0600 | [diff] [blame] | 112 | } if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | 113 | task->task_status.stat == SAS_DATA_UNDERRUN) { | 
|  | 114 | /* no error, but return the number of bytes of | 
|  | 115 | * underrun */ | 
|  | 116 | res = task->task_status.residual; | 
|  | 117 | break; | 
|  | 118 | } if (task->task_status.resp == SAS_TASK_COMPLETE && | 
|  | 119 | task->task_status.stat == SAS_DATA_OVERRUN) { | 
|  | 120 | res = -EMSGSIZE; | 
|  | 121 | break; | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 122 | } else { | 
|  | 123 | SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " | 
|  | 124 | "status 0x%x\n", __FUNCTION__, | 
|  | 125 | SAS_ADDR(dev->sas_addr), | 
|  | 126 | task->task_status.resp, | 
|  | 127 | task->task_status.stat); | 
|  | 128 | sas_free_task(task); | 
|  | 129 | task = NULL; | 
|  | 130 | } | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 131 | } | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 132 | ex_err: | 
| malahal@us.ibm.com | 42961ee | 2006-10-04 17:34:03 -0700 | [diff] [blame] | 133 | BUG_ON(retry == 3 && task != NULL); | 
|  | 134 | if (task != NULL) { | 
|  | 135 | sas_free_task(task); | 
|  | 136 | } | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 137 | return res; | 
|  | 138 | } | 
|  | 139 |  | 
|  | 140 | /* ---------- Allocations ---------- */ | 
|  | 141 |  | 
|  | 142 | static inline void *alloc_smp_req(int size) | 
|  | 143 | { | 
|  | 144 | u8 *p = kzalloc(size, GFP_KERNEL); | 
|  | 145 | if (p) | 
|  | 146 | p[0] = SMP_REQUEST; | 
|  | 147 | return p; | 
|  | 148 | } | 
|  | 149 |  | 
|  | 150 | static inline void *alloc_smp_resp(int size) | 
|  | 151 | { | 
|  | 152 | return kzalloc(size, GFP_KERNEL); | 
|  | 153 | } | 
|  | 154 |  | 
|  | 155 | /* ---------- Expander configuration ---------- */ | 
|  | 156 |  | 
|  | 157 | static void sas_set_ex_phy(struct domain_device *dev, int phy_id, | 
|  | 158 | void *disc_resp) | 
|  | 159 | { | 
|  | 160 | struct expander_device *ex = &dev->ex_dev; | 
|  | 161 | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | 162 | struct smp_resp *resp = disc_resp; | 
|  | 163 | struct discover_resp *dr = &resp->disc; | 
|  | 164 | struct sas_rphy *rphy = dev->rphy; | 
|  | 165 | int rediscover = (phy->phy != NULL); | 
|  | 166 |  | 
|  | 167 | if (!rediscover) { | 
|  | 168 | phy->phy = sas_phy_alloc(&rphy->dev, phy_id); | 
|  | 169 |  | 
|  | 170 | /* FIXME: error_handling */ | 
|  | 171 | BUG_ON(!phy->phy); | 
|  | 172 | } | 
|  | 173 |  | 
|  | 174 | switch (resp->result) { | 
|  | 175 | case SMP_RESP_PHY_VACANT: | 
|  | 176 | phy->phy_state = PHY_VACANT; | 
|  | 177 | return; | 
|  | 178 | default: | 
|  | 179 | phy->phy_state = PHY_NOT_PRESENT; | 
|  | 180 | return; | 
|  | 181 | case SMP_RESP_FUNC_ACC: | 
|  | 182 | phy->phy_state = PHY_EMPTY; /* do not know yet */ | 
|  | 183 | break; | 
|  | 184 | } | 
|  | 185 |  | 
|  | 186 | phy->phy_id = phy_id; | 
|  | 187 | phy->attached_dev_type = dr->attached_dev_type; | 
|  | 188 | phy->linkrate = dr->linkrate; | 
|  | 189 | phy->attached_sata_host = dr->attached_sata_host; | 
|  | 190 | phy->attached_sata_dev  = dr->attached_sata_dev; | 
|  | 191 | phy->attached_sata_ps   = dr->attached_sata_ps; | 
|  | 192 | phy->attached_iproto = dr->iproto << 1; | 
|  | 193 | phy->attached_tproto = dr->tproto << 1; | 
|  | 194 | memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | 195 | phy->attached_phy_id = dr->attached_phy_id; | 
|  | 196 | phy->phy_change_count = dr->change_count; | 
|  | 197 | phy->routing_attr = dr->routing_attr; | 
|  | 198 | phy->virtual = dr->virtual; | 
|  | 199 | phy->last_da_index = -1; | 
|  | 200 |  | 
|  | 201 | phy->phy->identify.initiator_port_protocols = phy->attached_iproto; | 
|  | 202 | phy->phy->identify.target_port_protocols = phy->attached_tproto; | 
|  | 203 | phy->phy->identify.phy_identifier = phy_id; | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 204 | phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; | 
|  | 205 | phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; | 
|  | 206 | phy->phy->minimum_linkrate = dr->pmin_linkrate; | 
|  | 207 | phy->phy->maximum_linkrate = dr->pmax_linkrate; | 
| James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 208 | phy->phy->negotiated_linkrate = phy->linkrate; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 209 |  | 
|  | 210 | if (!rediscover) | 
|  | 211 | sas_phy_add(phy->phy); | 
|  | 212 |  | 
|  | 213 | SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", | 
|  | 214 | SAS_ADDR(dev->sas_addr), phy->phy_id, | 
|  | 215 | phy->routing_attr == TABLE_ROUTING ? 'T' : | 
|  | 216 | phy->routing_attr == DIRECT_ROUTING ? 'D' : | 
|  | 217 | phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', | 
|  | 218 | SAS_ADDR(phy->attached_sas_addr)); | 
|  | 219 |  | 
|  | 220 | return; | 
|  | 221 | } | 
|  | 222 |  | 
|  | 223 | #define DISCOVER_REQ_SIZE  16 | 
|  | 224 | #define DISCOVER_RESP_SIZE 56 | 
|  | 225 |  | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 226 | static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, | 
|  | 227 | u8 *disc_resp, int single) | 
|  | 228 | { | 
|  | 229 | int i, res; | 
|  | 230 |  | 
|  | 231 | disc_req[9] = single; | 
|  | 232 | for (i = 1 ; i < 3; i++) { | 
|  | 233 | struct discover_resp *dr; | 
|  | 234 |  | 
|  | 235 | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, | 
|  | 236 | disc_resp, DISCOVER_RESP_SIZE); | 
|  | 237 | if (res) | 
|  | 238 | return res; | 
|  | 239 | /* This is detecting a failure to transmit inital | 
|  | 240 | * dev to host FIS as described in section G.5 of | 
|  | 241 | * sas-2 r 04b */ | 
|  | 242 | dr = &((struct smp_resp *)disc_resp)->disc; | 
|  | 243 | if (!(dr->attached_dev_type == 0 && | 
|  | 244 | dr->attached_sata_dev)) | 
|  | 245 | break; | 
|  | 246 | /* In order to generate the dev to host FIS, we | 
|  | 247 | * send a link reset to the expander port */ | 
| James Bottomley | 38e2f03 | 2006-09-07 15:52:09 -0500 | [diff] [blame] | 248 | sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 249 | /* Wait for the reset to trigger the negotiation */ | 
|  | 250 | msleep(500); | 
|  | 251 | } | 
|  | 252 | sas_set_ex_phy(dev, single, disc_resp); | 
|  | 253 | return 0; | 
|  | 254 | } | 
|  | 255 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 256 | static int sas_ex_phy_discover(struct domain_device *dev, int single) | 
|  | 257 | { | 
|  | 258 | struct expander_device *ex = &dev->ex_dev; | 
|  | 259 | int  res = 0; | 
|  | 260 | u8   *disc_req; | 
|  | 261 | u8   *disc_resp; | 
|  | 262 |  | 
|  | 263 | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); | 
|  | 264 | if (!disc_req) | 
|  | 265 | return -ENOMEM; | 
|  | 266 |  | 
|  | 267 | disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); | 
|  | 268 | if (!disc_resp) { | 
|  | 269 | kfree(disc_req); | 
|  | 270 | return -ENOMEM; | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 | disc_req[1] = SMP_DISCOVER; | 
|  | 274 |  | 
|  | 275 | if (0 <= single && single < ex->num_phys) { | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 276 | res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 277 | } else { | 
|  | 278 | int i; | 
|  | 279 |  | 
|  | 280 | for (i = 0; i < ex->num_phys; i++) { | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 281 | res = sas_ex_phy_discover_helper(dev, disc_req, | 
|  | 282 | disc_resp, i); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 283 | if (res) | 
|  | 284 | goto out_err; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 285 | } | 
|  | 286 | } | 
|  | 287 | out_err: | 
|  | 288 | kfree(disc_resp); | 
|  | 289 | kfree(disc_req); | 
|  | 290 | return res; | 
|  | 291 | } | 
|  | 292 |  | 
|  | 293 | static int sas_expander_discover(struct domain_device *dev) | 
|  | 294 | { | 
|  | 295 | struct expander_device *ex = &dev->ex_dev; | 
|  | 296 | int res = -ENOMEM; | 
|  | 297 |  | 
|  | 298 | ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL); | 
|  | 299 | if (!ex->ex_phy) | 
|  | 300 | return -ENOMEM; | 
|  | 301 |  | 
|  | 302 | res = sas_ex_phy_discover(dev, -1); | 
|  | 303 | if (res) | 
|  | 304 | goto out_err; | 
|  | 305 |  | 
|  | 306 | return 0; | 
|  | 307 | out_err: | 
|  | 308 | kfree(ex->ex_phy); | 
|  | 309 | ex->ex_phy = NULL; | 
|  | 310 | return res; | 
|  | 311 | } | 
|  | 312 |  | 
|  | 313 | #define MAX_EXPANDER_PHYS 128 | 
|  | 314 |  | 
|  | 315 | static void ex_assign_report_general(struct domain_device *dev, | 
|  | 316 | struct smp_resp *resp) | 
|  | 317 | { | 
|  | 318 | struct report_general_resp *rg = &resp->rg; | 
|  | 319 |  | 
|  | 320 | dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); | 
|  | 321 | dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); | 
|  | 322 | dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); | 
|  | 323 | dev->ex_dev.conf_route_table = rg->conf_route_table; | 
|  | 324 | dev->ex_dev.configuring = rg->configuring; | 
|  | 325 | memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); | 
|  | 326 | } | 
|  | 327 |  | 
|  | 328 | #define RG_REQ_SIZE   8 | 
|  | 329 | #define RG_RESP_SIZE 32 | 
|  | 330 |  | 
|  | 331 | static int sas_ex_general(struct domain_device *dev) | 
|  | 332 | { | 
|  | 333 | u8 *rg_req; | 
|  | 334 | struct smp_resp *rg_resp; | 
|  | 335 | int res; | 
|  | 336 | int i; | 
|  | 337 |  | 
|  | 338 | rg_req = alloc_smp_req(RG_REQ_SIZE); | 
|  | 339 | if (!rg_req) | 
|  | 340 | return -ENOMEM; | 
|  | 341 |  | 
|  | 342 | rg_resp = alloc_smp_resp(RG_RESP_SIZE); | 
|  | 343 | if (!rg_resp) { | 
|  | 344 | kfree(rg_req); | 
|  | 345 | return -ENOMEM; | 
|  | 346 | } | 
|  | 347 |  | 
|  | 348 | rg_req[1] = SMP_REPORT_GENERAL; | 
|  | 349 |  | 
|  | 350 | for (i = 0; i < 5; i++) { | 
|  | 351 | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, | 
|  | 352 | RG_RESP_SIZE); | 
|  | 353 |  | 
|  | 354 | if (res) { | 
|  | 355 | SAS_DPRINTK("RG to ex %016llx failed:0x%x\n", | 
|  | 356 | SAS_ADDR(dev->sas_addr), res); | 
|  | 357 | goto out; | 
|  | 358 | } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | 359 | SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n", | 
|  | 360 | SAS_ADDR(dev->sas_addr), rg_resp->result); | 
|  | 361 | res = rg_resp->result; | 
|  | 362 | goto out; | 
|  | 363 | } | 
|  | 364 |  | 
|  | 365 | ex_assign_report_general(dev, rg_resp); | 
|  | 366 |  | 
|  | 367 | if (dev->ex_dev.configuring) { | 
|  | 368 | SAS_DPRINTK("RG: ex %llx self-configuring...\n", | 
|  | 369 | SAS_ADDR(dev->sas_addr)); | 
|  | 370 | schedule_timeout_interruptible(5*HZ); | 
|  | 371 | } else | 
|  | 372 | break; | 
|  | 373 | } | 
|  | 374 | out: | 
|  | 375 | kfree(rg_req); | 
|  | 376 | kfree(rg_resp); | 
|  | 377 | return res; | 
|  | 378 | } | 
|  | 379 |  | 
|  | 380 | static void ex_assign_manuf_info(struct domain_device *dev, void | 
|  | 381 | *_mi_resp) | 
|  | 382 | { | 
|  | 383 | u8 *mi_resp = _mi_resp; | 
|  | 384 | struct sas_rphy *rphy = dev->rphy; | 
|  | 385 | struct sas_expander_device *edev = rphy_to_expander_device(rphy); | 
|  | 386 |  | 
|  | 387 | memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); | 
|  | 388 | memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); | 
|  | 389 | memcpy(edev->product_rev, mi_resp + 36, | 
|  | 390 | SAS_EXPANDER_PRODUCT_REV_LEN); | 
|  | 391 |  | 
|  | 392 | if (mi_resp[8] & 1) { | 
|  | 393 | memcpy(edev->component_vendor_id, mi_resp + 40, | 
|  | 394 | SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); | 
|  | 395 | edev->component_id = mi_resp[48] << 8 | mi_resp[49]; | 
|  | 396 | edev->component_revision_id = mi_resp[50]; | 
|  | 397 | } | 
|  | 398 | } | 
|  | 399 |  | 
|  | 400 | #define MI_REQ_SIZE   8 | 
|  | 401 | #define MI_RESP_SIZE 64 | 
|  | 402 |  | 
|  | 403 | static int sas_ex_manuf_info(struct domain_device *dev) | 
|  | 404 | { | 
|  | 405 | u8 *mi_req; | 
|  | 406 | u8 *mi_resp; | 
|  | 407 | int res; | 
|  | 408 |  | 
|  | 409 | mi_req = alloc_smp_req(MI_REQ_SIZE); | 
|  | 410 | if (!mi_req) | 
|  | 411 | return -ENOMEM; | 
|  | 412 |  | 
|  | 413 | mi_resp = alloc_smp_resp(MI_RESP_SIZE); | 
|  | 414 | if (!mi_resp) { | 
|  | 415 | kfree(mi_req); | 
|  | 416 | return -ENOMEM; | 
|  | 417 | } | 
|  | 418 |  | 
|  | 419 | mi_req[1] = SMP_REPORT_MANUF_INFO; | 
|  | 420 |  | 
|  | 421 | res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE); | 
|  | 422 | if (res) { | 
|  | 423 | SAS_DPRINTK("MI: ex %016llx failed:0x%x\n", | 
|  | 424 | SAS_ADDR(dev->sas_addr), res); | 
|  | 425 | goto out; | 
|  | 426 | } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { | 
|  | 427 | SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n", | 
|  | 428 | SAS_ADDR(dev->sas_addr), mi_resp[2]); | 
|  | 429 | goto out; | 
|  | 430 | } | 
|  | 431 |  | 
|  | 432 | ex_assign_manuf_info(dev, mi_resp); | 
|  | 433 | out: | 
|  | 434 | kfree(mi_req); | 
|  | 435 | kfree(mi_resp); | 
|  | 436 | return res; | 
|  | 437 | } | 
|  | 438 |  | 
|  | 439 | #define PC_REQ_SIZE  44 | 
|  | 440 | #define PC_RESP_SIZE 8 | 
|  | 441 |  | 
|  | 442 | int sas_smp_phy_control(struct domain_device *dev, int phy_id, | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 443 | enum phy_func phy_func, | 
|  | 444 | struct sas_phy_linkrates *rates) | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 445 | { | 
|  | 446 | u8 *pc_req; | 
|  | 447 | u8 *pc_resp; | 
|  | 448 | int res; | 
|  | 449 |  | 
|  | 450 | pc_req = alloc_smp_req(PC_REQ_SIZE); | 
|  | 451 | if (!pc_req) | 
|  | 452 | return -ENOMEM; | 
|  | 453 |  | 
|  | 454 | pc_resp = alloc_smp_resp(PC_RESP_SIZE); | 
|  | 455 | if (!pc_resp) { | 
|  | 456 | kfree(pc_req); | 
|  | 457 | return -ENOMEM; | 
|  | 458 | } | 
|  | 459 |  | 
|  | 460 | pc_req[1] = SMP_PHY_CONTROL; | 
|  | 461 | pc_req[9] = phy_id; | 
|  | 462 | pc_req[10]= phy_func; | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 463 | if (rates) { | 
|  | 464 | pc_req[32] = rates->minimum_linkrate << 4; | 
|  | 465 | pc_req[33] = rates->maximum_linkrate << 4; | 
|  | 466 | } | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 467 |  | 
|  | 468 | res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE); | 
|  | 469 |  | 
|  | 470 | kfree(pc_resp); | 
|  | 471 | kfree(pc_req); | 
|  | 472 | return res; | 
|  | 473 | } | 
|  | 474 |  | 
|  | 475 | static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) | 
|  | 476 | { | 
|  | 477 | struct expander_device *ex = &dev->ex_dev; | 
|  | 478 | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | 479 |  | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 480 | sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); | 
| James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 481 | phy->linkrate = SAS_PHY_DISABLED; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 482 | } | 
|  | 483 |  | 
|  | 484 | static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) | 
|  | 485 | { | 
|  | 486 | struct expander_device *ex = &dev->ex_dev; | 
|  | 487 | int i; | 
|  | 488 |  | 
|  | 489 | for (i = 0; i < ex->num_phys; i++) { | 
|  | 490 | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  | 491 |  | 
|  | 492 | if (phy->phy_state == PHY_VACANT || | 
|  | 493 | phy->phy_state == PHY_NOT_PRESENT) | 
|  | 494 | continue; | 
|  | 495 |  | 
|  | 496 | if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) | 
|  | 497 | sas_ex_disable_phy(dev, i); | 
|  | 498 | } | 
|  | 499 | } | 
|  | 500 |  | 
|  | 501 | static int sas_dev_present_in_domain(struct asd_sas_port *port, | 
|  | 502 | u8 *sas_addr) | 
|  | 503 | { | 
|  | 504 | struct domain_device *dev; | 
|  | 505 |  | 
|  | 506 | if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) | 
|  | 507 | return 1; | 
|  | 508 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { | 
|  | 509 | if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) | 
|  | 510 | return 1; | 
|  | 511 | } | 
|  | 512 | return 0; | 
|  | 513 | } | 
|  | 514 |  | 
|  | 515 | #define RPEL_REQ_SIZE	16 | 
|  | 516 | #define RPEL_RESP_SIZE	32 | 
|  | 517 | int sas_smp_get_phy_events(struct sas_phy *phy) | 
|  | 518 | { | 
|  | 519 | int res; | 
| Jesper Juhl | 92631fa | 2007-07-28 01:13:33 +0200 | [diff] [blame] | 520 | u8 *req; | 
|  | 521 | u8 *resp; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 522 | struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); | 
|  | 523 | struct domain_device *dev = sas_find_dev_by_rphy(rphy); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 524 |  | 
| Jesper Juhl | 92631fa | 2007-07-28 01:13:33 +0200 | [diff] [blame] | 525 | req = alloc_smp_req(RPEL_REQ_SIZE); | 
|  | 526 | if (!req) | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 527 | return -ENOMEM; | 
|  | 528 |  | 
| Jesper Juhl | 92631fa | 2007-07-28 01:13:33 +0200 | [diff] [blame] | 529 | resp = alloc_smp_resp(RPEL_RESP_SIZE); | 
|  | 530 | if (!resp) { | 
|  | 531 | kfree(req); | 
|  | 532 | return -ENOMEM; | 
|  | 533 | } | 
|  | 534 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 535 | req[1] = SMP_REPORT_PHY_ERR_LOG; | 
|  | 536 | req[9] = phy->number; | 
|  | 537 |  | 
|  | 538 | res = smp_execute_task(dev, req, RPEL_REQ_SIZE, | 
|  | 539 | resp, RPEL_RESP_SIZE); | 
|  | 540 |  | 
|  | 541 | if (!res) | 
|  | 542 | goto out; | 
|  | 543 |  | 
|  | 544 | phy->invalid_dword_count = scsi_to_u32(&resp[12]); | 
|  | 545 | phy->running_disparity_error_count = scsi_to_u32(&resp[16]); | 
|  | 546 | phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]); | 
|  | 547 | phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); | 
|  | 548 |  | 
|  | 549 | out: | 
|  | 550 | kfree(resp); | 
|  | 551 | return res; | 
|  | 552 |  | 
|  | 553 | } | 
|  | 554 |  | 
| James Bottomley | b914217 | 2007-07-22 13:15:55 -0500 | [diff] [blame] | 555 | #ifdef CONFIG_SCSI_SAS_ATA | 
|  | 556 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 557 | #define RPS_REQ_SIZE  16 | 
|  | 558 | #define RPS_RESP_SIZE 60 | 
|  | 559 |  | 
|  | 560 | static int sas_get_report_phy_sata(struct domain_device *dev, | 
|  | 561 | int phy_id, | 
|  | 562 | struct smp_resp *rps_resp) | 
|  | 563 | { | 
|  | 564 | int res; | 
|  | 565 | u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 566 | u8 *resp = (u8 *)rps_resp; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 567 |  | 
|  | 568 | if (!rps_req) | 
|  | 569 | return -ENOMEM; | 
|  | 570 |  | 
|  | 571 | rps_req[1] = SMP_REPORT_PHY_SATA; | 
|  | 572 | rps_req[9] = phy_id; | 
|  | 573 |  | 
|  | 574 | res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, | 
|  | 575 | rps_resp, RPS_RESP_SIZE); | 
|  | 576 |  | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 577 | /* 0x34 is the FIS type for the D2H fis.  There's a potential | 
|  | 578 | * standards cockup here.  sas-2 explicitly specifies the FIS | 
|  | 579 | * should be encoded so that FIS type is in resp[24]. | 
|  | 580 | * However, some expanders endian reverse this.  Undo the | 
|  | 581 | * reversal here */ | 
|  | 582 | if (!res && resp[27] == 0x34 && resp[24] != 0x34) { | 
|  | 583 | int i; | 
|  | 584 |  | 
|  | 585 | for (i = 0; i < 5; i++) { | 
|  | 586 | int j = 24 + (i*4); | 
|  | 587 | u8 a, b; | 
|  | 588 | a = resp[j + 0]; | 
|  | 589 | b = resp[j + 1]; | 
|  | 590 | resp[j + 0] = resp[j + 3]; | 
|  | 591 | resp[j + 1] = resp[j + 2]; | 
|  | 592 | resp[j + 2] = b; | 
|  | 593 | resp[j + 3] = a; | 
|  | 594 | } | 
|  | 595 | } | 
|  | 596 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 597 | kfree(rps_req); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 598 | return res; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 599 | } | 
| James Bottomley | b914217 | 2007-07-22 13:15:55 -0500 | [diff] [blame] | 600 | #endif | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 601 |  | 
|  | 602 | static void sas_ex_get_linkrate(struct domain_device *parent, | 
|  | 603 | struct domain_device *child, | 
|  | 604 | struct ex_phy *parent_phy) | 
|  | 605 | { | 
|  | 606 | struct expander_device *parent_ex = &parent->ex_dev; | 
|  | 607 | struct sas_port *port; | 
|  | 608 | int i; | 
|  | 609 |  | 
|  | 610 | child->pathways = 0; | 
|  | 611 |  | 
|  | 612 | port = parent_phy->port; | 
|  | 613 |  | 
|  | 614 | for (i = 0; i < parent_ex->num_phys; i++) { | 
|  | 615 | struct ex_phy *phy = &parent_ex->ex_phy[i]; | 
|  | 616 |  | 
|  | 617 | if (phy->phy_state == PHY_VACANT || | 
|  | 618 | phy->phy_state == PHY_NOT_PRESENT) | 
|  | 619 | continue; | 
|  | 620 |  | 
|  | 621 | if (SAS_ADDR(phy->attached_sas_addr) == | 
|  | 622 | SAS_ADDR(child->sas_addr)) { | 
|  | 623 |  | 
|  | 624 | child->min_linkrate = min(parent->min_linkrate, | 
|  | 625 | phy->linkrate); | 
|  | 626 | child->max_linkrate = max(parent->max_linkrate, | 
|  | 627 | phy->linkrate); | 
|  | 628 | child->pathways++; | 
|  | 629 | sas_port_add_phy(port, phy->phy); | 
|  | 630 | } | 
|  | 631 | } | 
|  | 632 | child->linkrate = min(parent_phy->linkrate, child->max_linkrate); | 
|  | 633 | child->pathways = min(child->pathways, parent->pathways); | 
|  | 634 | } | 
|  | 635 |  | 
|  | 636 | static struct domain_device *sas_ex_discover_end_dev( | 
|  | 637 | struct domain_device *parent, int phy_id) | 
|  | 638 | { | 
|  | 639 | struct expander_device *parent_ex = &parent->ex_dev; | 
|  | 640 | struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; | 
|  | 641 | struct domain_device *child = NULL; | 
|  | 642 | struct sas_rphy *rphy; | 
|  | 643 | int res; | 
|  | 644 |  | 
|  | 645 | if (phy->attached_sata_host || phy->attached_sata_ps) | 
|  | 646 | return NULL; | 
|  | 647 |  | 
|  | 648 | child = kzalloc(sizeof(*child), GFP_KERNEL); | 
|  | 649 | if (!child) | 
|  | 650 | return NULL; | 
|  | 651 |  | 
|  | 652 | child->parent = parent; | 
|  | 653 | child->port   = parent->port; | 
|  | 654 | child->iproto = phy->attached_iproto; | 
|  | 655 | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | 656 | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 657 | if (!phy->port) { | 
|  | 658 | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); | 
|  | 659 | if (unlikely(!phy->port)) | 
|  | 660 | goto out_err; | 
|  | 661 | if (unlikely(sas_port_add(phy->port) != 0)) { | 
|  | 662 | sas_port_free(phy->port); | 
|  | 663 | goto out_err; | 
|  | 664 | } | 
|  | 665 | } | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 666 | sas_ex_get_linkrate(parent, child, phy); | 
|  | 667 |  | 
| James Bottomley | b914217 | 2007-07-22 13:15:55 -0500 | [diff] [blame] | 668 | #ifdef CONFIG_SCSI_SAS_ATA | 
| Darrick J. Wong | 5929faf | 2007-11-05 11:51:17 -0800 | [diff] [blame] | 669 | if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 670 | child->dev_type = SATA_DEV; | 
| Darrick J. Wong | 5929faf | 2007-11-05 11:51:17 -0800 | [diff] [blame] | 671 | if (phy->attached_tproto & SAS_PROTOCOL_STP) | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 672 | child->tproto = phy->attached_tproto; | 
|  | 673 | if (phy->attached_sata_dev) | 
|  | 674 | child->tproto |= SATA_DEV; | 
|  | 675 | res = sas_get_report_phy_sata(parent, phy_id, | 
|  | 676 | &child->sata_dev.rps_resp); | 
|  | 677 | if (res) { | 
|  | 678 | SAS_DPRINTK("report phy sata to %016llx:0x%x returned " | 
|  | 679 | "0x%x\n", SAS_ADDR(parent->sas_addr), | 
|  | 680 | phy_id, res); | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 681 | goto out_free; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 682 | } | 
|  | 683 | memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, | 
|  | 684 | sizeof(struct dev_to_host_fis)); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 685 |  | 
|  | 686 | rphy = sas_end_device_alloc(phy->port); | 
| James Bottomley | 528fd55 | 2006-10-16 10:57:05 -0500 | [diff] [blame] | 687 | if (unlikely(!rphy)) | 
|  | 688 | goto out_free; | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 689 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 690 | sas_init_dev(child); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 691 |  | 
|  | 692 | child->rphy = rphy; | 
|  | 693 |  | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 694 | spin_lock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 695 | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 696 | spin_unlock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 697 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 698 | res = sas_discover_sata(child); | 
|  | 699 | if (res) { | 
|  | 700 | SAS_DPRINTK("sas_discover_sata() for device %16llx at " | 
|  | 701 | "%016llx:0x%x returned 0x%x\n", | 
|  | 702 | SAS_ADDR(child->sas_addr), | 
|  | 703 | SAS_ADDR(parent->sas_addr), phy_id, res); | 
| James Bottomley | 1acce19 | 2006-08-22 12:39:19 -0500 | [diff] [blame] | 704 | goto out_list_del; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 705 | } | 
| James Bottomley | b914217 | 2007-07-22 13:15:55 -0500 | [diff] [blame] | 706 | } else | 
|  | 707 | #endif | 
| Darrick J. Wong | 5929faf | 2007-11-05 11:51:17 -0800 | [diff] [blame] | 708 | if (phy->attached_tproto & SAS_PROTOCOL_SSP) { | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 709 | child->dev_type = SAS_END_DEV; | 
|  | 710 | rphy = sas_end_device_alloc(phy->port); | 
|  | 711 | /* FIXME: error handling */ | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 712 | if (unlikely(!rphy)) | 
|  | 713 | goto out_free; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 714 | child->tproto = phy->attached_tproto; | 
|  | 715 | sas_init_dev(child); | 
|  | 716 |  | 
|  | 717 | child->rphy = rphy; | 
|  | 718 | sas_fill_in_rphy(child, rphy); | 
|  | 719 |  | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 720 | spin_lock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 721 | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 722 | spin_unlock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 723 |  | 
|  | 724 | res = sas_discover_end_dev(child); | 
|  | 725 | if (res) { | 
|  | 726 | SAS_DPRINTK("sas_discover_end_dev() for device %16llx " | 
|  | 727 | "at %016llx:0x%x returned 0x%x\n", | 
|  | 728 | SAS_ADDR(child->sas_addr), | 
|  | 729 | SAS_ADDR(parent->sas_addr), phy_id, res); | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 730 | goto out_list_del; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 731 | } | 
|  | 732 | } else { | 
|  | 733 | SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n", | 
|  | 734 | phy->attached_tproto, SAS_ADDR(parent->sas_addr), | 
|  | 735 | phy_id); | 
| James Bottomley | b914217 | 2007-07-22 13:15:55 -0500 | [diff] [blame] | 736 | goto out_free; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 737 | } | 
|  | 738 |  | 
|  | 739 | list_add_tail(&child->siblings, &parent_ex->children); | 
|  | 740 | return child; | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 741 |  | 
|  | 742 | out_list_del: | 
| Darrick J. Wong | 6f63caa | 2007-01-26 14:08:43 -0800 | [diff] [blame] | 743 | sas_rphy_free(child->rphy); | 
|  | 744 | child->rphy = NULL; | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 745 | list_del(&child->dev_list_node); | 
| James Bottomley | 024879e | 2006-11-15 18:03:07 -0600 | [diff] [blame] | 746 | out_free: | 
|  | 747 | sas_port_delete(phy->port); | 
|  | 748 | out_err: | 
|  | 749 | phy->port = NULL; | 
|  | 750 | kfree(child); | 
|  | 751 | return NULL; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 752 | } | 
|  | 753 |  | 
| Darrick J. Wong | 423f7cf | 2007-01-30 12:07:27 -0800 | [diff] [blame] | 754 | /* See if this phy is part of a wide port */ | 
|  | 755 | static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id) | 
|  | 756 | { | 
|  | 757 | struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; | 
|  | 758 | int i; | 
|  | 759 |  | 
|  | 760 | for (i = 0; i < parent->ex_dev.num_phys; i++) { | 
|  | 761 | struct ex_phy *ephy = &parent->ex_dev.ex_phy[i]; | 
|  | 762 |  | 
|  | 763 | if (ephy == phy) | 
|  | 764 | continue; | 
|  | 765 |  | 
|  | 766 | if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr, | 
|  | 767 | SAS_ADDR_SIZE) && ephy->port) { | 
|  | 768 | sas_port_add_phy(ephy->port, phy->phy); | 
|  | 769 | phy->phy_state = PHY_DEVICE_DISCOVERED; | 
|  | 770 | return 0; | 
|  | 771 | } | 
|  | 772 | } | 
|  | 773 |  | 
|  | 774 | return -ENODEV; | 
|  | 775 | } | 
|  | 776 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 777 | static struct domain_device *sas_ex_discover_expander( | 
|  | 778 | struct domain_device *parent, int phy_id) | 
|  | 779 | { | 
|  | 780 | struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); | 
|  | 781 | struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; | 
|  | 782 | struct domain_device *child = NULL; | 
|  | 783 | struct sas_rphy *rphy; | 
|  | 784 | struct sas_expander_device *edev; | 
|  | 785 | struct asd_sas_port *port; | 
|  | 786 | int res; | 
|  | 787 |  | 
|  | 788 | if (phy->routing_attr == DIRECT_ROUTING) { | 
|  | 789 | SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not " | 
|  | 790 | "allowed\n", | 
|  | 791 | SAS_ADDR(parent->sas_addr), phy_id, | 
|  | 792 | SAS_ADDR(phy->attached_sas_addr), | 
|  | 793 | phy->attached_phy_id); | 
|  | 794 | return NULL; | 
|  | 795 | } | 
|  | 796 | child = kzalloc(sizeof(*child), GFP_KERNEL); | 
|  | 797 | if (!child) | 
|  | 798 | return NULL; | 
|  | 799 |  | 
|  | 800 | phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); | 
|  | 801 | /* FIXME: better error handling */ | 
|  | 802 | BUG_ON(sas_port_add(phy->port) != 0); | 
|  | 803 |  | 
|  | 804 |  | 
|  | 805 | switch (phy->attached_dev_type) { | 
|  | 806 | case EDGE_DEV: | 
|  | 807 | rphy = sas_expander_alloc(phy->port, | 
|  | 808 | SAS_EDGE_EXPANDER_DEVICE); | 
|  | 809 | break; | 
|  | 810 | case FANOUT_DEV: | 
|  | 811 | rphy = sas_expander_alloc(phy->port, | 
|  | 812 | SAS_FANOUT_EXPANDER_DEVICE); | 
|  | 813 | break; | 
|  | 814 | default: | 
|  | 815 | rphy = NULL;	/* shut gcc up */ | 
|  | 816 | BUG(); | 
|  | 817 | } | 
|  | 818 | port = parent->port; | 
|  | 819 | child->rphy = rphy; | 
|  | 820 | edev = rphy_to_expander_device(rphy); | 
|  | 821 | child->dev_type = phy->attached_dev_type; | 
|  | 822 | child->parent = parent; | 
|  | 823 | child->port = port; | 
|  | 824 | child->iproto = phy->attached_iproto; | 
|  | 825 | child->tproto = phy->attached_tproto; | 
|  | 826 | memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | 827 | sas_hash_addr(child->hashed_sas_addr, child->sas_addr); | 
|  | 828 | sas_ex_get_linkrate(parent, child, phy); | 
|  | 829 | edev->level = parent_ex->level + 1; | 
|  | 830 | parent->port->disc.max_level = max(parent->port->disc.max_level, | 
|  | 831 | edev->level); | 
|  | 832 | sas_init_dev(child); | 
|  | 833 | sas_fill_in_rphy(child, rphy); | 
|  | 834 | sas_rphy_add(rphy); | 
|  | 835 |  | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 836 | spin_lock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 837 | list_add_tail(&child->dev_list_node, &parent->port->dev_list); | 
| James Bottomley | 9d720d8 | 2007-07-16 13:15:51 -0500 | [diff] [blame] | 838 | spin_unlock_irq(&parent->port->dev_list_lock); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 839 |  | 
|  | 840 | res = sas_discover_expander(child); | 
|  | 841 | if (res) { | 
|  | 842 | kfree(child); | 
|  | 843 | return NULL; | 
|  | 844 | } | 
|  | 845 | list_add_tail(&child->siblings, &parent->ex_dev.children); | 
|  | 846 | return child; | 
|  | 847 | } | 
|  | 848 |  | 
|  | 849 | static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) | 
|  | 850 | { | 
|  | 851 | struct expander_device *ex = &dev->ex_dev; | 
|  | 852 | struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; | 
|  | 853 | struct domain_device *child = NULL; | 
|  | 854 | int res = 0; | 
|  | 855 |  | 
|  | 856 | /* Phy state */ | 
| James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 857 | if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 858 | if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 859 | res = sas_ex_phy_discover(dev, phy_id); | 
|  | 860 | if (res) | 
|  | 861 | return res; | 
|  | 862 | } | 
|  | 863 |  | 
|  | 864 | /* Parent and domain coherency */ | 
|  | 865 | if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == | 
|  | 866 | SAS_ADDR(dev->port->sas_addr))) { | 
|  | 867 | sas_add_parent_port(dev, phy_id); | 
|  | 868 | return 0; | 
|  | 869 | } | 
|  | 870 | if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == | 
|  | 871 | SAS_ADDR(dev->parent->sas_addr))) { | 
|  | 872 | sas_add_parent_port(dev, phy_id); | 
|  | 873 | if (ex_phy->routing_attr == TABLE_ROUTING) | 
|  | 874 | sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); | 
|  | 875 | return 0; | 
|  | 876 | } | 
|  | 877 |  | 
|  | 878 | if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) | 
|  | 879 | sas_ex_disable_port(dev, ex_phy->attached_sas_addr); | 
|  | 880 |  | 
|  | 881 | if (ex_phy->attached_dev_type == NO_DEVICE) { | 
|  | 882 | if (ex_phy->routing_attr == DIRECT_ROUTING) { | 
|  | 883 | memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); | 
|  | 884 | sas_configure_routing(dev, ex_phy->attached_sas_addr); | 
|  | 885 | } | 
|  | 886 | return 0; | 
| James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 887 | } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 888 | return 0; | 
|  | 889 |  | 
|  | 890 | if (ex_phy->attached_dev_type != SAS_END_DEV && | 
|  | 891 | ex_phy->attached_dev_type != FANOUT_DEV && | 
|  | 892 | ex_phy->attached_dev_type != EDGE_DEV) { | 
|  | 893 | SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " | 
|  | 894 | "phy 0x%x\n", ex_phy->attached_dev_type, | 
|  | 895 | SAS_ADDR(dev->sas_addr), | 
|  | 896 | phy_id); | 
|  | 897 | return 0; | 
|  | 898 | } | 
|  | 899 |  | 
|  | 900 | res = sas_configure_routing(dev, ex_phy->attached_sas_addr); | 
|  | 901 | if (res) { | 
|  | 902 | SAS_DPRINTK("configure routing for dev %016llx " | 
|  | 903 | "reported 0x%x. Forgotten\n", | 
|  | 904 | SAS_ADDR(ex_phy->attached_sas_addr), res); | 
|  | 905 | sas_disable_routing(dev, ex_phy->attached_sas_addr); | 
|  | 906 | return res; | 
|  | 907 | } | 
|  | 908 |  | 
| Darrick J. Wong | 423f7cf | 2007-01-30 12:07:27 -0800 | [diff] [blame] | 909 | res = sas_ex_join_wide_port(dev, phy_id); | 
|  | 910 | if (!res) { | 
|  | 911 | SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n", | 
|  | 912 | phy_id, SAS_ADDR(ex_phy->attached_sas_addr)); | 
|  | 913 | return res; | 
|  | 914 | } | 
|  | 915 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 916 | switch (ex_phy->attached_dev_type) { | 
|  | 917 | case SAS_END_DEV: | 
|  | 918 | child = sas_ex_discover_end_dev(dev, phy_id); | 
|  | 919 | break; | 
|  | 920 | case FANOUT_DEV: | 
|  | 921 | if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { | 
|  | 922 | SAS_DPRINTK("second fanout expander %016llx phy 0x%x " | 
|  | 923 | "attached to ex %016llx phy 0x%x\n", | 
|  | 924 | SAS_ADDR(ex_phy->attached_sas_addr), | 
|  | 925 | ex_phy->attached_phy_id, | 
|  | 926 | SAS_ADDR(dev->sas_addr), | 
|  | 927 | phy_id); | 
|  | 928 | sas_ex_disable_phy(dev, phy_id); | 
|  | 929 | break; | 
|  | 930 | } else | 
|  | 931 | memcpy(dev->port->disc.fanout_sas_addr, | 
|  | 932 | ex_phy->attached_sas_addr, SAS_ADDR_SIZE); | 
|  | 933 | /* fallthrough */ | 
|  | 934 | case EDGE_DEV: | 
|  | 935 | child = sas_ex_discover_expander(dev, phy_id); | 
|  | 936 | break; | 
|  | 937 | default: | 
|  | 938 | break; | 
|  | 939 | } | 
|  | 940 |  | 
|  | 941 | if (child) { | 
|  | 942 | int i; | 
|  | 943 |  | 
|  | 944 | for (i = 0; i < ex->num_phys; i++) { | 
|  | 945 | if (ex->ex_phy[i].phy_state == PHY_VACANT || | 
|  | 946 | ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) | 
|  | 947 | continue; | 
|  | 948 |  | 
|  | 949 | if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == | 
|  | 950 | SAS_ADDR(child->sas_addr)) | 
|  | 951 | ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; | 
|  | 952 | } | 
|  | 953 | } | 
|  | 954 |  | 
|  | 955 | return res; | 
|  | 956 | } | 
|  | 957 |  | 
|  | 958 | static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) | 
|  | 959 | { | 
|  | 960 | struct expander_device *ex = &dev->ex_dev; | 
|  | 961 | int i; | 
|  | 962 |  | 
|  | 963 | for (i = 0; i < ex->num_phys; i++) { | 
|  | 964 | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  | 965 |  | 
|  | 966 | if (phy->phy_state == PHY_VACANT || | 
|  | 967 | phy->phy_state == PHY_NOT_PRESENT) | 
|  | 968 | continue; | 
|  | 969 |  | 
|  | 970 | if ((phy->attached_dev_type == EDGE_DEV || | 
|  | 971 | phy->attached_dev_type == FANOUT_DEV) && | 
|  | 972 | phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | 973 |  | 
|  | 974 | memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); | 
|  | 975 |  | 
|  | 976 | return 1; | 
|  | 977 | } | 
|  | 978 | } | 
|  | 979 | return 0; | 
|  | 980 | } | 
|  | 981 |  | 
|  | 982 | static int sas_check_level_subtractive_boundary(struct domain_device *dev) | 
|  | 983 | { | 
|  | 984 | struct expander_device *ex = &dev->ex_dev; | 
|  | 985 | struct domain_device *child; | 
|  | 986 | u8 sub_addr[8] = {0, }; | 
|  | 987 |  | 
|  | 988 | list_for_each_entry(child, &ex->children, siblings) { | 
|  | 989 | if (child->dev_type != EDGE_DEV && | 
|  | 990 | child->dev_type != FANOUT_DEV) | 
|  | 991 | continue; | 
|  | 992 | if (sub_addr[0] == 0) { | 
|  | 993 | sas_find_sub_addr(child, sub_addr); | 
|  | 994 | continue; | 
|  | 995 | } else { | 
|  | 996 | u8 s2[8]; | 
|  | 997 |  | 
|  | 998 | if (sas_find_sub_addr(child, s2) && | 
|  | 999 | (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { | 
|  | 1000 |  | 
|  | 1001 | SAS_DPRINTK("ex %016llx->%016llx-?->%016llx " | 
|  | 1002 | "diverges from subtractive " | 
|  | 1003 | "boundary %016llx\n", | 
|  | 1004 | SAS_ADDR(dev->sas_addr), | 
|  | 1005 | SAS_ADDR(child->sas_addr), | 
|  | 1006 | SAS_ADDR(s2), | 
|  | 1007 | SAS_ADDR(sub_addr)); | 
|  | 1008 |  | 
|  | 1009 | sas_ex_disable_port(child, s2); | 
|  | 1010 | } | 
|  | 1011 | } | 
|  | 1012 | } | 
|  | 1013 | return 0; | 
|  | 1014 | } | 
|  | 1015 | /** | 
|  | 1016 | * sas_ex_discover_devices -- discover devices attached to this expander | 
|  | 1017 | * dev: pointer to the expander domain device | 
|  | 1018 | * single: if you want to do a single phy, else set to -1; | 
|  | 1019 | * | 
|  | 1020 | * Configure this expander for use with its devices and register the | 
|  | 1021 | * devices of this expander. | 
|  | 1022 | */ | 
|  | 1023 | static int sas_ex_discover_devices(struct domain_device *dev, int single) | 
|  | 1024 | { | 
|  | 1025 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1026 | int i = 0, end = ex->num_phys; | 
|  | 1027 | int res = 0; | 
|  | 1028 |  | 
|  | 1029 | if (0 <= single && single < end) { | 
|  | 1030 | i = single; | 
|  | 1031 | end = i+1; | 
|  | 1032 | } | 
|  | 1033 |  | 
|  | 1034 | for ( ; i < end; i++) { | 
|  | 1035 | struct ex_phy *ex_phy = &ex->ex_phy[i]; | 
|  | 1036 |  | 
|  | 1037 | if (ex_phy->phy_state == PHY_VACANT || | 
|  | 1038 | ex_phy->phy_state == PHY_NOT_PRESENT || | 
|  | 1039 | ex_phy->phy_state == PHY_DEVICE_DISCOVERED) | 
|  | 1040 | continue; | 
|  | 1041 |  | 
|  | 1042 | switch (ex_phy->linkrate) { | 
| James Bottomley | 88edf74 | 2006-09-06 17:36:13 -0500 | [diff] [blame] | 1043 | case SAS_PHY_DISABLED: | 
|  | 1044 | case SAS_PHY_RESET_PROBLEM: | 
|  | 1045 | case SAS_SATA_PORT_SELECTOR: | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1046 | continue; | 
|  | 1047 | default: | 
|  | 1048 | res = sas_ex_discover_dev(dev, i); | 
|  | 1049 | if (res) | 
|  | 1050 | break; | 
|  | 1051 | continue; | 
|  | 1052 | } | 
|  | 1053 | } | 
|  | 1054 |  | 
|  | 1055 | if (!res) | 
|  | 1056 | sas_check_level_subtractive_boundary(dev); | 
|  | 1057 |  | 
|  | 1058 | return res; | 
|  | 1059 | } | 
|  | 1060 |  | 
|  | 1061 | static int sas_check_ex_subtractive_boundary(struct domain_device *dev) | 
|  | 1062 | { | 
|  | 1063 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1064 | int i; | 
|  | 1065 | u8  *sub_sas_addr = NULL; | 
|  | 1066 |  | 
|  | 1067 | if (dev->dev_type != EDGE_DEV) | 
|  | 1068 | return 0; | 
|  | 1069 |  | 
|  | 1070 | for (i = 0; i < ex->num_phys; i++) { | 
|  | 1071 | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  | 1072 |  | 
|  | 1073 | if (phy->phy_state == PHY_VACANT || | 
|  | 1074 | phy->phy_state == PHY_NOT_PRESENT) | 
|  | 1075 | continue; | 
|  | 1076 |  | 
|  | 1077 | if ((phy->attached_dev_type == FANOUT_DEV || | 
|  | 1078 | phy->attached_dev_type == EDGE_DEV) && | 
|  | 1079 | phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | 1080 |  | 
|  | 1081 | if (!sub_sas_addr) | 
|  | 1082 | sub_sas_addr = &phy->attached_sas_addr[0]; | 
|  | 1083 | else if (SAS_ADDR(sub_sas_addr) != | 
|  | 1084 | SAS_ADDR(phy->attached_sas_addr)) { | 
|  | 1085 |  | 
|  | 1086 | SAS_DPRINTK("ex %016llx phy 0x%x " | 
|  | 1087 | "diverges(%016llx) on subtractive " | 
|  | 1088 | "boundary(%016llx). Disabled\n", | 
|  | 1089 | SAS_ADDR(dev->sas_addr), i, | 
|  | 1090 | SAS_ADDR(phy->attached_sas_addr), | 
|  | 1091 | SAS_ADDR(sub_sas_addr)); | 
|  | 1092 | sas_ex_disable_phy(dev, i); | 
|  | 1093 | } | 
|  | 1094 | } | 
|  | 1095 | } | 
|  | 1096 | return 0; | 
|  | 1097 | } | 
|  | 1098 |  | 
|  | 1099 | static void sas_print_parent_topology_bug(struct domain_device *child, | 
|  | 1100 | struct ex_phy *parent_phy, | 
|  | 1101 | struct ex_phy *child_phy) | 
|  | 1102 | { | 
|  | 1103 | static const char ra_char[] = { | 
|  | 1104 | [DIRECT_ROUTING] = 'D', | 
|  | 1105 | [SUBTRACTIVE_ROUTING] = 'S', | 
|  | 1106 | [TABLE_ROUTING] = 'T', | 
|  | 1107 | }; | 
|  | 1108 | static const char *ex_type[] = { | 
|  | 1109 | [EDGE_DEV] = "edge", | 
|  | 1110 | [FANOUT_DEV] = "fanout", | 
|  | 1111 | }; | 
|  | 1112 | struct domain_device *parent = child->parent; | 
|  | 1113 |  | 
|  | 1114 | sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x " | 
|  | 1115 | "has %c:%c routing link!\n", | 
|  | 1116 |  | 
|  | 1117 | ex_type[parent->dev_type], | 
|  | 1118 | SAS_ADDR(parent->sas_addr), | 
|  | 1119 | parent_phy->phy_id, | 
|  | 1120 |  | 
|  | 1121 | ex_type[child->dev_type], | 
|  | 1122 | SAS_ADDR(child->sas_addr), | 
|  | 1123 | child_phy->phy_id, | 
|  | 1124 |  | 
|  | 1125 | ra_char[parent_phy->routing_attr], | 
|  | 1126 | ra_char[child_phy->routing_attr]); | 
|  | 1127 | } | 
|  | 1128 |  | 
|  | 1129 | static int sas_check_eeds(struct domain_device *child, | 
|  | 1130 | struct ex_phy *parent_phy, | 
|  | 1131 | struct ex_phy *child_phy) | 
|  | 1132 | { | 
|  | 1133 | int res = 0; | 
|  | 1134 | struct domain_device *parent = child->parent; | 
|  | 1135 |  | 
|  | 1136 | if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { | 
|  | 1137 | res = -ENODEV; | 
|  | 1138 | SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx " | 
|  | 1139 | "phy S:0x%x, while there is a fanout ex %016llx\n", | 
|  | 1140 | SAS_ADDR(parent->sas_addr), | 
|  | 1141 | parent_phy->phy_id, | 
|  | 1142 | SAS_ADDR(child->sas_addr), | 
|  | 1143 | child_phy->phy_id, | 
|  | 1144 | SAS_ADDR(parent->port->disc.fanout_sas_addr)); | 
|  | 1145 | } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { | 
|  | 1146 | memcpy(parent->port->disc.eeds_a, parent->sas_addr, | 
|  | 1147 | SAS_ADDR_SIZE); | 
|  | 1148 | memcpy(parent->port->disc.eeds_b, child->sas_addr, | 
|  | 1149 | SAS_ADDR_SIZE); | 
|  | 1150 | } else if (((SAS_ADDR(parent->port->disc.eeds_a) == | 
|  | 1151 | SAS_ADDR(parent->sas_addr)) || | 
|  | 1152 | (SAS_ADDR(parent->port->disc.eeds_a) == | 
|  | 1153 | SAS_ADDR(child->sas_addr))) | 
|  | 1154 | && | 
|  | 1155 | ((SAS_ADDR(parent->port->disc.eeds_b) == | 
|  | 1156 | SAS_ADDR(parent->sas_addr)) || | 
|  | 1157 | (SAS_ADDR(parent->port->disc.eeds_b) == | 
|  | 1158 | SAS_ADDR(child->sas_addr)))) | 
|  | 1159 | ; | 
|  | 1160 | else { | 
|  | 1161 | res = -ENODEV; | 
|  | 1162 | SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx " | 
|  | 1163 | "phy 0x%x link forms a third EEDS!\n", | 
|  | 1164 | SAS_ADDR(parent->sas_addr), | 
|  | 1165 | parent_phy->phy_id, | 
|  | 1166 | SAS_ADDR(child->sas_addr), | 
|  | 1167 | child_phy->phy_id); | 
|  | 1168 | } | 
|  | 1169 |  | 
|  | 1170 | return res; | 
|  | 1171 | } | 
|  | 1172 |  | 
|  | 1173 | /* Here we spill over 80 columns.  It is intentional. | 
|  | 1174 | */ | 
|  | 1175 | static int sas_check_parent_topology(struct domain_device *child) | 
|  | 1176 | { | 
|  | 1177 | struct expander_device *child_ex = &child->ex_dev; | 
|  | 1178 | struct expander_device *parent_ex; | 
|  | 1179 | int i; | 
|  | 1180 | int res = 0; | 
|  | 1181 |  | 
|  | 1182 | if (!child->parent) | 
|  | 1183 | return 0; | 
|  | 1184 |  | 
|  | 1185 | if (child->parent->dev_type != EDGE_DEV && | 
|  | 1186 | child->parent->dev_type != FANOUT_DEV) | 
|  | 1187 | return 0; | 
|  | 1188 |  | 
|  | 1189 | parent_ex = &child->parent->ex_dev; | 
|  | 1190 |  | 
|  | 1191 | for (i = 0; i < parent_ex->num_phys; i++) { | 
|  | 1192 | struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; | 
|  | 1193 | struct ex_phy *child_phy; | 
|  | 1194 |  | 
|  | 1195 | if (parent_phy->phy_state == PHY_VACANT || | 
|  | 1196 | parent_phy->phy_state == PHY_NOT_PRESENT) | 
|  | 1197 | continue; | 
|  | 1198 |  | 
|  | 1199 | if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) | 
|  | 1200 | continue; | 
|  | 1201 |  | 
|  | 1202 | child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; | 
|  | 1203 |  | 
|  | 1204 | switch (child->parent->dev_type) { | 
|  | 1205 | case EDGE_DEV: | 
|  | 1206 | if (child->dev_type == FANOUT_DEV) { | 
|  | 1207 | if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || | 
|  | 1208 | child_phy->routing_attr != TABLE_ROUTING) { | 
|  | 1209 | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | 1210 | res = -ENODEV; | 
|  | 1211 | } | 
|  | 1212 | } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | 1213 | if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { | 
|  | 1214 | res = sas_check_eeds(child, parent_phy, child_phy); | 
|  | 1215 | } else if (child_phy->routing_attr != TABLE_ROUTING) { | 
|  | 1216 | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | 1217 | res = -ENODEV; | 
|  | 1218 | } | 
|  | 1219 | } else if (parent_phy->routing_attr == TABLE_ROUTING && | 
|  | 1220 | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { | 
|  | 1221 | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | 1222 | res = -ENODEV; | 
|  | 1223 | } | 
|  | 1224 | break; | 
|  | 1225 | case FANOUT_DEV: | 
|  | 1226 | if (parent_phy->routing_attr != TABLE_ROUTING || | 
|  | 1227 | child_phy->routing_attr != SUBTRACTIVE_ROUTING) { | 
|  | 1228 | sas_print_parent_topology_bug(child, parent_phy, child_phy); | 
|  | 1229 | res = -ENODEV; | 
|  | 1230 | } | 
|  | 1231 | break; | 
|  | 1232 | default: | 
|  | 1233 | break; | 
|  | 1234 | } | 
|  | 1235 | } | 
|  | 1236 |  | 
|  | 1237 | return res; | 
|  | 1238 | } | 
|  | 1239 |  | 
|  | 1240 | #define RRI_REQ_SIZE  16 | 
|  | 1241 | #define RRI_RESP_SIZE 44 | 
|  | 1242 |  | 
|  | 1243 | static int sas_configure_present(struct domain_device *dev, int phy_id, | 
|  | 1244 | u8 *sas_addr, int *index, int *present) | 
|  | 1245 | { | 
|  | 1246 | int i, res = 0; | 
|  | 1247 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1248 | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | 1249 | u8 *rri_req; | 
|  | 1250 | u8 *rri_resp; | 
|  | 1251 |  | 
|  | 1252 | *present = 0; | 
|  | 1253 | *index = 0; | 
|  | 1254 |  | 
|  | 1255 | rri_req = alloc_smp_req(RRI_REQ_SIZE); | 
|  | 1256 | if (!rri_req) | 
|  | 1257 | return -ENOMEM; | 
|  | 1258 |  | 
|  | 1259 | rri_resp = alloc_smp_resp(RRI_RESP_SIZE); | 
|  | 1260 | if (!rri_resp) { | 
|  | 1261 | kfree(rri_req); | 
|  | 1262 | return -ENOMEM; | 
|  | 1263 | } | 
|  | 1264 |  | 
|  | 1265 | rri_req[1] = SMP_REPORT_ROUTE_INFO; | 
|  | 1266 | rri_req[9] = phy_id; | 
|  | 1267 |  | 
|  | 1268 | for (i = 0; i < ex->max_route_indexes ; i++) { | 
|  | 1269 | *(__be16 *)(rri_req+6) = cpu_to_be16(i); | 
|  | 1270 | res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, | 
|  | 1271 | RRI_RESP_SIZE); | 
|  | 1272 | if (res) | 
|  | 1273 | goto out; | 
|  | 1274 | res = rri_resp[2]; | 
|  | 1275 | if (res == SMP_RESP_NO_INDEX) { | 
|  | 1276 | SAS_DPRINTK("overflow of indexes: dev %016llx " | 
|  | 1277 | "phy 0x%x index 0x%x\n", | 
|  | 1278 | SAS_ADDR(dev->sas_addr), phy_id, i); | 
|  | 1279 | goto out; | 
|  | 1280 | } else if (res != SMP_RESP_FUNC_ACC) { | 
|  | 1281 | SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x " | 
|  | 1282 | "result 0x%x\n", __FUNCTION__, | 
|  | 1283 | SAS_ADDR(dev->sas_addr), phy_id, i, res); | 
|  | 1284 | goto out; | 
|  | 1285 | } | 
|  | 1286 | if (SAS_ADDR(sas_addr) != 0) { | 
|  | 1287 | if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { | 
|  | 1288 | *index = i; | 
|  | 1289 | if ((rri_resp[12] & 0x80) == 0x80) | 
|  | 1290 | *present = 0; | 
|  | 1291 | else | 
|  | 1292 | *present = 1; | 
|  | 1293 | goto out; | 
|  | 1294 | } else if (SAS_ADDR(rri_resp+16) == 0) { | 
|  | 1295 | *index = i; | 
|  | 1296 | *present = 0; | 
|  | 1297 | goto out; | 
|  | 1298 | } | 
|  | 1299 | } else if (SAS_ADDR(rri_resp+16) == 0 && | 
|  | 1300 | phy->last_da_index < i) { | 
|  | 1301 | phy->last_da_index = i; | 
|  | 1302 | *index = i; | 
|  | 1303 | *present = 0; | 
|  | 1304 | goto out; | 
|  | 1305 | } | 
|  | 1306 | } | 
|  | 1307 | res = -1; | 
|  | 1308 | out: | 
|  | 1309 | kfree(rri_req); | 
|  | 1310 | kfree(rri_resp); | 
|  | 1311 | return res; | 
|  | 1312 | } | 
|  | 1313 |  | 
|  | 1314 | #define CRI_REQ_SIZE  44 | 
|  | 1315 | #define CRI_RESP_SIZE  8 | 
|  | 1316 |  | 
|  | 1317 | static int sas_configure_set(struct domain_device *dev, int phy_id, | 
|  | 1318 | u8 *sas_addr, int index, int include) | 
|  | 1319 | { | 
|  | 1320 | int res; | 
|  | 1321 | u8 *cri_req; | 
|  | 1322 | u8 *cri_resp; | 
|  | 1323 |  | 
|  | 1324 | cri_req = alloc_smp_req(CRI_REQ_SIZE); | 
|  | 1325 | if (!cri_req) | 
|  | 1326 | return -ENOMEM; | 
|  | 1327 |  | 
|  | 1328 | cri_resp = alloc_smp_resp(CRI_RESP_SIZE); | 
|  | 1329 | if (!cri_resp) { | 
|  | 1330 | kfree(cri_req); | 
|  | 1331 | return -ENOMEM; | 
|  | 1332 | } | 
|  | 1333 |  | 
|  | 1334 | cri_req[1] = SMP_CONF_ROUTE_INFO; | 
|  | 1335 | *(__be16 *)(cri_req+6) = cpu_to_be16(index); | 
|  | 1336 | cri_req[9] = phy_id; | 
|  | 1337 | if (SAS_ADDR(sas_addr) == 0 || !include) | 
|  | 1338 | cri_req[12] |= 0x80; | 
|  | 1339 | memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); | 
|  | 1340 |  | 
|  | 1341 | res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, | 
|  | 1342 | CRI_RESP_SIZE); | 
|  | 1343 | if (res) | 
|  | 1344 | goto out; | 
|  | 1345 | res = cri_resp[2]; | 
|  | 1346 | if (res == SMP_RESP_NO_INDEX) { | 
|  | 1347 | SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x " | 
|  | 1348 | "index 0x%x\n", | 
|  | 1349 | SAS_ADDR(dev->sas_addr), phy_id, index); | 
|  | 1350 | } | 
|  | 1351 | out: | 
|  | 1352 | kfree(cri_req); | 
|  | 1353 | kfree(cri_resp); | 
|  | 1354 | return res; | 
|  | 1355 | } | 
|  | 1356 |  | 
|  | 1357 | static int sas_configure_phy(struct domain_device *dev, int phy_id, | 
|  | 1358 | u8 *sas_addr, int include) | 
|  | 1359 | { | 
|  | 1360 | int index; | 
|  | 1361 | int present; | 
|  | 1362 | int res; | 
|  | 1363 |  | 
|  | 1364 | res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); | 
|  | 1365 | if (res) | 
|  | 1366 | return res; | 
|  | 1367 | if (include ^ present) | 
|  | 1368 | return sas_configure_set(dev, phy_id, sas_addr, index,include); | 
|  | 1369 |  | 
|  | 1370 | return res; | 
|  | 1371 | } | 
|  | 1372 |  | 
|  | 1373 | /** | 
|  | 1374 | * sas_configure_parent -- configure routing table of parent | 
|  | 1375 | * parent: parent expander | 
|  | 1376 | * child: child expander | 
|  | 1377 | * sas_addr: SAS port identifier of device directly attached to child | 
|  | 1378 | */ | 
|  | 1379 | static int sas_configure_parent(struct domain_device *parent, | 
|  | 1380 | struct domain_device *child, | 
|  | 1381 | u8 *sas_addr, int include) | 
|  | 1382 | { | 
|  | 1383 | struct expander_device *ex_parent = &parent->ex_dev; | 
|  | 1384 | int res = 0; | 
|  | 1385 | int i; | 
|  | 1386 |  | 
|  | 1387 | if (parent->parent) { | 
|  | 1388 | res = sas_configure_parent(parent->parent, parent, sas_addr, | 
|  | 1389 | include); | 
|  | 1390 | if (res) | 
|  | 1391 | return res; | 
|  | 1392 | } | 
|  | 1393 |  | 
|  | 1394 | if (ex_parent->conf_route_table == 0) { | 
|  | 1395 | SAS_DPRINTK("ex %016llx has self-configuring routing table\n", | 
|  | 1396 | SAS_ADDR(parent->sas_addr)); | 
|  | 1397 | return 0; | 
|  | 1398 | } | 
|  | 1399 |  | 
|  | 1400 | for (i = 0; i < ex_parent->num_phys; i++) { | 
|  | 1401 | struct ex_phy *phy = &ex_parent->ex_phy[i]; | 
|  | 1402 |  | 
|  | 1403 | if ((phy->routing_attr == TABLE_ROUTING) && | 
|  | 1404 | (SAS_ADDR(phy->attached_sas_addr) == | 
|  | 1405 | SAS_ADDR(child->sas_addr))) { | 
|  | 1406 | res = sas_configure_phy(parent, i, sas_addr, include); | 
|  | 1407 | if (res) | 
|  | 1408 | return res; | 
|  | 1409 | } | 
|  | 1410 | } | 
|  | 1411 |  | 
|  | 1412 | return res; | 
|  | 1413 | } | 
|  | 1414 |  | 
|  | 1415 | /** | 
|  | 1416 | * sas_configure_routing -- configure routing | 
|  | 1417 | * dev: expander device | 
|  | 1418 | * sas_addr: port identifier of device directly attached to the expander device | 
|  | 1419 | */ | 
|  | 1420 | static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) | 
|  | 1421 | { | 
|  | 1422 | if (dev->parent) | 
|  | 1423 | return sas_configure_parent(dev->parent, dev, sas_addr, 1); | 
|  | 1424 | return 0; | 
|  | 1425 | } | 
|  | 1426 |  | 
|  | 1427 | static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr) | 
|  | 1428 | { | 
|  | 1429 | if (dev->parent) | 
|  | 1430 | return sas_configure_parent(dev->parent, dev, sas_addr, 0); | 
|  | 1431 | return 0; | 
|  | 1432 | } | 
|  | 1433 |  | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1434 | /** | 
|  | 1435 | * sas_discover_expander -- expander discovery | 
|  | 1436 | * @ex: pointer to expander domain device | 
|  | 1437 | * | 
|  | 1438 | * See comment in sas_discover_sata(). | 
|  | 1439 | */ | 
|  | 1440 | static int sas_discover_expander(struct domain_device *dev) | 
|  | 1441 | { | 
|  | 1442 | int res; | 
|  | 1443 |  | 
|  | 1444 | res = sas_notify_lldd_dev_found(dev); | 
|  | 1445 | if (res) | 
|  | 1446 | return res; | 
|  | 1447 |  | 
|  | 1448 | res = sas_ex_general(dev); | 
|  | 1449 | if (res) | 
|  | 1450 | goto out_err; | 
|  | 1451 | res = sas_ex_manuf_info(dev); | 
|  | 1452 | if (res) | 
|  | 1453 | goto out_err; | 
|  | 1454 |  | 
|  | 1455 | res = sas_expander_discover(dev); | 
|  | 1456 | if (res) { | 
|  | 1457 | SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n", | 
|  | 1458 | SAS_ADDR(dev->sas_addr), res); | 
|  | 1459 | goto out_err; | 
|  | 1460 | } | 
|  | 1461 |  | 
|  | 1462 | sas_check_ex_subtractive_boundary(dev); | 
|  | 1463 | res = sas_check_parent_topology(dev); | 
|  | 1464 | if (res) | 
|  | 1465 | goto out_err; | 
|  | 1466 | return 0; | 
|  | 1467 | out_err: | 
|  | 1468 | sas_notify_lldd_dev_gone(dev); | 
|  | 1469 | return res; | 
|  | 1470 | } | 
|  | 1471 |  | 
|  | 1472 | static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) | 
|  | 1473 | { | 
|  | 1474 | int res = 0; | 
|  | 1475 | struct domain_device *dev; | 
|  | 1476 |  | 
|  | 1477 | list_for_each_entry(dev, &port->dev_list, dev_list_node) { | 
|  | 1478 | if (dev->dev_type == EDGE_DEV || | 
|  | 1479 | dev->dev_type == FANOUT_DEV) { | 
|  | 1480 | struct sas_expander_device *ex = | 
|  | 1481 | rphy_to_expander_device(dev->rphy); | 
|  | 1482 |  | 
|  | 1483 | if (level == ex->level) | 
|  | 1484 | res = sas_ex_discover_devices(dev, -1); | 
|  | 1485 | else if (level > 0) | 
|  | 1486 | res = sas_ex_discover_devices(port->port_dev, -1); | 
|  | 1487 |  | 
|  | 1488 | } | 
|  | 1489 | } | 
|  | 1490 |  | 
|  | 1491 | return res; | 
|  | 1492 | } | 
|  | 1493 |  | 
|  | 1494 | static int sas_ex_bfs_disc(struct asd_sas_port *port) | 
|  | 1495 | { | 
|  | 1496 | int res; | 
|  | 1497 | int level; | 
|  | 1498 |  | 
|  | 1499 | do { | 
|  | 1500 | level = port->disc.max_level; | 
|  | 1501 | res = sas_ex_level_discovery(port, level); | 
|  | 1502 | mb(); | 
|  | 1503 | } while (level < port->disc.max_level); | 
|  | 1504 |  | 
|  | 1505 | return res; | 
|  | 1506 | } | 
|  | 1507 |  | 
|  | 1508 | int sas_discover_root_expander(struct domain_device *dev) | 
|  | 1509 | { | 
|  | 1510 | int res; | 
|  | 1511 | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); | 
|  | 1512 |  | 
| Darrick J. Wong | bf45120 | 2007-01-11 14:14:52 -0800 | [diff] [blame] | 1513 | res = sas_rphy_add(dev->rphy); | 
|  | 1514 | if (res) | 
|  | 1515 | goto out_err; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1516 |  | 
|  | 1517 | ex->level = dev->port->disc.max_level; /* 0 */ | 
|  | 1518 | res = sas_discover_expander(dev); | 
| Darrick J. Wong | bf45120 | 2007-01-11 14:14:52 -0800 | [diff] [blame] | 1519 | if (res) | 
|  | 1520 | goto out_err2; | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1521 |  | 
| Darrick J. Wong | bf45120 | 2007-01-11 14:14:52 -0800 | [diff] [blame] | 1522 | sas_ex_bfs_disc(dev->port); | 
|  | 1523 |  | 
|  | 1524 | return res; | 
|  | 1525 |  | 
|  | 1526 | out_err2: | 
| Darrick J. Wong | 6f63caa | 2007-01-26 14:08:43 -0800 | [diff] [blame] | 1527 | sas_rphy_remove(dev->rphy); | 
| Darrick J. Wong | bf45120 | 2007-01-11 14:14:52 -0800 | [diff] [blame] | 1528 | out_err: | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1529 | return res; | 
|  | 1530 | } | 
|  | 1531 |  | 
|  | 1532 | /* ---------- Domain revalidation ---------- */ | 
|  | 1533 |  | 
|  | 1534 | static int sas_get_phy_discover(struct domain_device *dev, | 
|  | 1535 | int phy_id, struct smp_resp *disc_resp) | 
|  | 1536 | { | 
|  | 1537 | int res; | 
|  | 1538 | u8 *disc_req; | 
|  | 1539 |  | 
|  | 1540 | disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); | 
|  | 1541 | if (!disc_req) | 
|  | 1542 | return -ENOMEM; | 
|  | 1543 |  | 
|  | 1544 | disc_req[1] = SMP_DISCOVER; | 
|  | 1545 | disc_req[9] = phy_id; | 
|  | 1546 |  | 
|  | 1547 | res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, | 
|  | 1548 | disc_resp, DISCOVER_RESP_SIZE); | 
|  | 1549 | if (res) | 
|  | 1550 | goto out; | 
|  | 1551 | else if (disc_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | 1552 | res = disc_resp->result; | 
|  | 1553 | goto out; | 
|  | 1554 | } | 
|  | 1555 | out: | 
|  | 1556 | kfree(disc_req); | 
|  | 1557 | return res; | 
|  | 1558 | } | 
|  | 1559 |  | 
|  | 1560 | static int sas_get_phy_change_count(struct domain_device *dev, | 
|  | 1561 | int phy_id, int *pcc) | 
|  | 1562 | { | 
|  | 1563 | int res; | 
|  | 1564 | struct smp_resp *disc_resp; | 
|  | 1565 |  | 
|  | 1566 | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); | 
|  | 1567 | if (!disc_resp) | 
|  | 1568 | return -ENOMEM; | 
|  | 1569 |  | 
|  | 1570 | res = sas_get_phy_discover(dev, phy_id, disc_resp); | 
|  | 1571 | if (!res) | 
|  | 1572 | *pcc = disc_resp->disc.change_count; | 
|  | 1573 |  | 
|  | 1574 | kfree(disc_resp); | 
|  | 1575 | return res; | 
|  | 1576 | } | 
|  | 1577 |  | 
|  | 1578 | static int sas_get_phy_attached_sas_addr(struct domain_device *dev, | 
|  | 1579 | int phy_id, u8 *attached_sas_addr) | 
|  | 1580 | { | 
|  | 1581 | int res; | 
|  | 1582 | struct smp_resp *disc_resp; | 
|  | 1583 | struct discover_resp *dr; | 
|  | 1584 |  | 
|  | 1585 | disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); | 
|  | 1586 | if (!disc_resp) | 
|  | 1587 | return -ENOMEM; | 
|  | 1588 | dr = &disc_resp->disc; | 
|  | 1589 |  | 
|  | 1590 | res = sas_get_phy_discover(dev, phy_id, disc_resp); | 
|  | 1591 | if (!res) { | 
|  | 1592 | memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); | 
|  | 1593 | if (dr->attached_dev_type == 0) | 
|  | 1594 | memset(attached_sas_addr, 0, 8); | 
|  | 1595 | } | 
|  | 1596 | kfree(disc_resp); | 
|  | 1597 | return res; | 
|  | 1598 | } | 
|  | 1599 |  | 
|  | 1600 | static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, | 
|  | 1601 | int from_phy) | 
|  | 1602 | { | 
|  | 1603 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1604 | int res = 0; | 
|  | 1605 | int i; | 
|  | 1606 |  | 
|  | 1607 | for (i = from_phy; i < ex->num_phys; i++) { | 
|  | 1608 | int phy_change_count = 0; | 
|  | 1609 |  | 
|  | 1610 | res = sas_get_phy_change_count(dev, i, &phy_change_count); | 
|  | 1611 | if (res) | 
|  | 1612 | goto out; | 
|  | 1613 | else if (phy_change_count != ex->ex_phy[i].phy_change_count) { | 
|  | 1614 | ex->ex_phy[i].phy_change_count = phy_change_count; | 
|  | 1615 | *phy_id = i; | 
|  | 1616 | return 0; | 
|  | 1617 | } | 
|  | 1618 | } | 
|  | 1619 | out: | 
|  | 1620 | return res; | 
|  | 1621 | } | 
|  | 1622 |  | 
|  | 1623 | static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) | 
|  | 1624 | { | 
|  | 1625 | int res; | 
|  | 1626 | u8  *rg_req; | 
|  | 1627 | struct smp_resp  *rg_resp; | 
|  | 1628 |  | 
|  | 1629 | rg_req = alloc_smp_req(RG_REQ_SIZE); | 
|  | 1630 | if (!rg_req) | 
|  | 1631 | return -ENOMEM; | 
|  | 1632 |  | 
|  | 1633 | rg_resp = alloc_smp_resp(RG_RESP_SIZE); | 
|  | 1634 | if (!rg_resp) { | 
|  | 1635 | kfree(rg_req); | 
|  | 1636 | return -ENOMEM; | 
|  | 1637 | } | 
|  | 1638 |  | 
|  | 1639 | rg_req[1] = SMP_REPORT_GENERAL; | 
|  | 1640 |  | 
|  | 1641 | res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, | 
|  | 1642 | RG_RESP_SIZE); | 
|  | 1643 | if (res) | 
|  | 1644 | goto out; | 
|  | 1645 | if (rg_resp->result != SMP_RESP_FUNC_ACC) { | 
|  | 1646 | res = rg_resp->result; | 
|  | 1647 | goto out; | 
|  | 1648 | } | 
|  | 1649 |  | 
|  | 1650 | *ecc = be16_to_cpu(rg_resp->rg.change_count); | 
|  | 1651 | out: | 
|  | 1652 | kfree(rg_resp); | 
|  | 1653 | kfree(rg_req); | 
|  | 1654 | return res; | 
|  | 1655 | } | 
|  | 1656 |  | 
|  | 1657 | static int sas_find_bcast_dev(struct domain_device *dev, | 
|  | 1658 | struct domain_device **src_dev) | 
|  | 1659 | { | 
|  | 1660 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1661 | int ex_change_count = -1; | 
|  | 1662 | int res; | 
|  | 1663 |  | 
|  | 1664 | res = sas_get_ex_change_count(dev, &ex_change_count); | 
|  | 1665 | if (res) | 
|  | 1666 | goto out; | 
|  | 1667 | if (ex_change_count != -1 && | 
|  | 1668 | ex_change_count != ex->ex_change_count) { | 
|  | 1669 | *src_dev = dev; | 
|  | 1670 | ex->ex_change_count = ex_change_count; | 
|  | 1671 | } else { | 
|  | 1672 | struct domain_device *ch; | 
|  | 1673 |  | 
|  | 1674 | list_for_each_entry(ch, &ex->children, siblings) { | 
|  | 1675 | if (ch->dev_type == EDGE_DEV || | 
|  | 1676 | ch->dev_type == FANOUT_DEV) { | 
|  | 1677 | res = sas_find_bcast_dev(ch, src_dev); | 
|  | 1678 | if (src_dev) | 
|  | 1679 | return res; | 
|  | 1680 | } | 
|  | 1681 | } | 
|  | 1682 | } | 
|  | 1683 | out: | 
|  | 1684 | return res; | 
|  | 1685 | } | 
|  | 1686 |  | 
|  | 1687 | static void sas_unregister_ex_tree(struct domain_device *dev) | 
|  | 1688 | { | 
|  | 1689 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1690 | struct domain_device *child, *n; | 
|  | 1691 |  | 
|  | 1692 | list_for_each_entry_safe(child, n, &ex->children, siblings) { | 
|  | 1693 | if (child->dev_type == EDGE_DEV || | 
|  | 1694 | child->dev_type == FANOUT_DEV) | 
|  | 1695 | sas_unregister_ex_tree(child); | 
|  | 1696 | else | 
|  | 1697 | sas_unregister_dev(child); | 
|  | 1698 | } | 
|  | 1699 | sas_unregister_dev(dev); | 
|  | 1700 | } | 
|  | 1701 |  | 
|  | 1702 | static void sas_unregister_devs_sas_addr(struct domain_device *parent, | 
|  | 1703 | int phy_id) | 
|  | 1704 | { | 
|  | 1705 | struct expander_device *ex_dev = &parent->ex_dev; | 
|  | 1706 | struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; | 
|  | 1707 | struct domain_device *child, *n; | 
|  | 1708 |  | 
|  | 1709 | list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { | 
|  | 1710 | if (SAS_ADDR(child->sas_addr) == | 
|  | 1711 | SAS_ADDR(phy->attached_sas_addr)) { | 
|  | 1712 | if (child->dev_type == EDGE_DEV || | 
|  | 1713 | child->dev_type == FANOUT_DEV) | 
|  | 1714 | sas_unregister_ex_tree(child); | 
|  | 1715 | else | 
|  | 1716 | sas_unregister_dev(child); | 
|  | 1717 | break; | 
|  | 1718 | } | 
|  | 1719 | } | 
|  | 1720 | sas_disable_routing(parent, phy->attached_sas_addr); | 
|  | 1721 | memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); | 
|  | 1722 | sas_port_delete_phy(phy->port, phy->phy); | 
|  | 1723 | if (phy->port->num_phys == 0) | 
|  | 1724 | sas_port_delete(phy->port); | 
|  | 1725 | phy->port = NULL; | 
|  | 1726 | } | 
|  | 1727 |  | 
|  | 1728 | static int sas_discover_bfs_by_root_level(struct domain_device *root, | 
|  | 1729 | const int level) | 
|  | 1730 | { | 
|  | 1731 | struct expander_device *ex_root = &root->ex_dev; | 
|  | 1732 | struct domain_device *child; | 
|  | 1733 | int res = 0; | 
|  | 1734 |  | 
|  | 1735 | list_for_each_entry(child, &ex_root->children, siblings) { | 
|  | 1736 | if (child->dev_type == EDGE_DEV || | 
|  | 1737 | child->dev_type == FANOUT_DEV) { | 
|  | 1738 | struct sas_expander_device *ex = | 
|  | 1739 | rphy_to_expander_device(child->rphy); | 
|  | 1740 |  | 
|  | 1741 | if (level > ex->level) | 
|  | 1742 | res = sas_discover_bfs_by_root_level(child, | 
|  | 1743 | level); | 
|  | 1744 | else if (level == ex->level) | 
|  | 1745 | res = sas_ex_discover_devices(child, -1); | 
|  | 1746 | } | 
|  | 1747 | } | 
|  | 1748 | return res; | 
|  | 1749 | } | 
|  | 1750 |  | 
|  | 1751 | static int sas_discover_bfs_by_root(struct domain_device *dev) | 
|  | 1752 | { | 
|  | 1753 | int res; | 
|  | 1754 | struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); | 
|  | 1755 | int level = ex->level+1; | 
|  | 1756 |  | 
|  | 1757 | res = sas_ex_discover_devices(dev, -1); | 
|  | 1758 | if (res) | 
|  | 1759 | goto out; | 
|  | 1760 | do { | 
|  | 1761 | res = sas_discover_bfs_by_root_level(dev, level); | 
|  | 1762 | mb(); | 
|  | 1763 | level += 1; | 
|  | 1764 | } while (level <= dev->port->disc.max_level); | 
|  | 1765 | out: | 
|  | 1766 | return res; | 
|  | 1767 | } | 
|  | 1768 |  | 
|  | 1769 | static int sas_discover_new(struct domain_device *dev, int phy_id) | 
|  | 1770 | { | 
|  | 1771 | struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; | 
|  | 1772 | struct domain_device *child; | 
|  | 1773 | int res; | 
|  | 1774 |  | 
|  | 1775 | SAS_DPRINTK("ex %016llx phy%d new device attached\n", | 
|  | 1776 | SAS_ADDR(dev->sas_addr), phy_id); | 
|  | 1777 | res = sas_ex_phy_discover(dev, phy_id); | 
|  | 1778 | if (res) | 
|  | 1779 | goto out; | 
|  | 1780 | res = sas_ex_discover_devices(dev, phy_id); | 
|  | 1781 | if (res) | 
|  | 1782 | goto out; | 
|  | 1783 | list_for_each_entry(child, &dev->ex_dev.children, siblings) { | 
|  | 1784 | if (SAS_ADDR(child->sas_addr) == | 
|  | 1785 | SAS_ADDR(ex_phy->attached_sas_addr)) { | 
|  | 1786 | if (child->dev_type == EDGE_DEV || | 
|  | 1787 | child->dev_type == FANOUT_DEV) | 
|  | 1788 | res = sas_discover_bfs_by_root(child); | 
|  | 1789 | break; | 
|  | 1790 | } | 
|  | 1791 | } | 
|  | 1792 | out: | 
|  | 1793 | return res; | 
|  | 1794 | } | 
|  | 1795 |  | 
|  | 1796 | static int sas_rediscover_dev(struct domain_device *dev, int phy_id) | 
|  | 1797 | { | 
|  | 1798 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1799 | struct ex_phy *phy = &ex->ex_phy[phy_id]; | 
|  | 1800 | u8 attached_sas_addr[8]; | 
|  | 1801 | int res; | 
|  | 1802 |  | 
|  | 1803 | res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); | 
|  | 1804 | switch (res) { | 
|  | 1805 | case SMP_RESP_NO_PHY: | 
|  | 1806 | phy->phy_state = PHY_NOT_PRESENT; | 
|  | 1807 | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | 1808 | goto out; break; | 
|  | 1809 | case SMP_RESP_PHY_VACANT: | 
|  | 1810 | phy->phy_state = PHY_VACANT; | 
|  | 1811 | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | 1812 | goto out; break; | 
|  | 1813 | case SMP_RESP_FUNC_ACC: | 
|  | 1814 | break; | 
|  | 1815 | } | 
|  | 1816 |  | 
|  | 1817 | if (SAS_ADDR(attached_sas_addr) == 0) { | 
|  | 1818 | phy->phy_state = PHY_EMPTY; | 
|  | 1819 | sas_unregister_devs_sas_addr(dev, phy_id); | 
|  | 1820 | } else if (SAS_ADDR(attached_sas_addr) == | 
|  | 1821 | SAS_ADDR(phy->attached_sas_addr)) { | 
|  | 1822 | SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", | 
|  | 1823 | SAS_ADDR(dev->sas_addr), phy_id); | 
| James Bottomley | a01e70e | 2006-09-06 19:28:07 -0500 | [diff] [blame] | 1824 | sas_ex_phy_discover(dev, phy_id); | 
| James Bottomley | 2908d77 | 2006-08-29 09:22:51 -0500 | [diff] [blame] | 1825 | } else | 
|  | 1826 | res = sas_discover_new(dev, phy_id); | 
|  | 1827 | out: | 
|  | 1828 | return res; | 
|  | 1829 | } | 
|  | 1830 |  | 
|  | 1831 | static int sas_rediscover(struct domain_device *dev, const int phy_id) | 
|  | 1832 | { | 
|  | 1833 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1834 | struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; | 
|  | 1835 | int res = 0; | 
|  | 1836 | int i; | 
|  | 1837 |  | 
|  | 1838 | SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n", | 
|  | 1839 | SAS_ADDR(dev->sas_addr), phy_id); | 
|  | 1840 |  | 
|  | 1841 | if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { | 
|  | 1842 | for (i = 0; i < ex->num_phys; i++) { | 
|  | 1843 | struct ex_phy *phy = &ex->ex_phy[i]; | 
|  | 1844 |  | 
|  | 1845 | if (i == phy_id) | 
|  | 1846 | continue; | 
|  | 1847 | if (SAS_ADDR(phy->attached_sas_addr) == | 
|  | 1848 | SAS_ADDR(changed_phy->attached_sas_addr)) { | 
|  | 1849 | SAS_DPRINTK("phy%d part of wide port with " | 
|  | 1850 | "phy%d\n", phy_id, i); | 
|  | 1851 | goto out; | 
|  | 1852 | } | 
|  | 1853 | } | 
|  | 1854 | res = sas_rediscover_dev(dev, phy_id); | 
|  | 1855 | } else | 
|  | 1856 | res = sas_discover_new(dev, phy_id); | 
|  | 1857 | out: | 
|  | 1858 | return res; | 
|  | 1859 | } | 
|  | 1860 |  | 
|  | 1861 | /** | 
|  | 1862 | * sas_revalidate_domain -- revalidate the domain | 
|  | 1863 | * @port: port to the domain of interest | 
|  | 1864 | * | 
|  | 1865 | * NOTE: this process _must_ quit (return) as soon as any connection | 
|  | 1866 | * errors are encountered.  Connection recovery is done elsewhere. | 
|  | 1867 | * Discover process only interrogates devices in order to discover the | 
|  | 1868 | * domain. | 
|  | 1869 | */ | 
|  | 1870 | int sas_ex_revalidate_domain(struct domain_device *port_dev) | 
|  | 1871 | { | 
|  | 1872 | int res; | 
|  | 1873 | struct domain_device *dev = NULL; | 
|  | 1874 |  | 
|  | 1875 | res = sas_find_bcast_dev(port_dev, &dev); | 
|  | 1876 | if (res) | 
|  | 1877 | goto out; | 
|  | 1878 | if (dev) { | 
|  | 1879 | struct expander_device *ex = &dev->ex_dev; | 
|  | 1880 | int i = 0, phy_id; | 
|  | 1881 |  | 
|  | 1882 | do { | 
|  | 1883 | phy_id = -1; | 
|  | 1884 | res = sas_find_bcast_phy(dev, &phy_id, i); | 
|  | 1885 | if (phy_id == -1) | 
|  | 1886 | break; | 
|  | 1887 | res = sas_rediscover(dev, phy_id); | 
|  | 1888 | i = phy_id + 1; | 
|  | 1889 | } while (i < ex->num_phys); | 
|  | 1890 | } | 
|  | 1891 | out: | 
|  | 1892 | return res; | 
|  | 1893 | } | 
|  | 1894 |  | 
| FUJITA Tomonori | ba1fc17 | 2007-07-09 12:52:08 +0900 | [diff] [blame] | 1895 | int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, | 
|  | 1896 | struct request *req) | 
|  | 1897 | { | 
|  | 1898 | struct domain_device *dev; | 
| Darrick J. Wong | 2cd614c | 2007-07-24 09:33:49 -0700 | [diff] [blame] | 1899 | int ret, type; | 
| FUJITA Tomonori | ba1fc17 | 2007-07-09 12:52:08 +0900 | [diff] [blame] | 1900 | struct request *rsp = req->next_rq; | 
|  | 1901 |  | 
|  | 1902 | if (!rsp) { | 
|  | 1903 | printk("%s: space for a smp response is missing\n", | 
|  | 1904 | __FUNCTION__); | 
|  | 1905 | return -EINVAL; | 
|  | 1906 | } | 
|  | 1907 |  | 
| Darrick J. Wong | 2cd614c | 2007-07-24 09:33:49 -0700 | [diff] [blame] | 1908 | /* no rphy means no smp target support (ie aic94xx host) */ | 
| James Bottomley | b98e66f | 2007-12-28 16:35:17 -0600 | [diff] [blame] | 1909 | if (!rphy) | 
|  | 1910 | return sas_smp_host_handler(shost, req, rsp); | 
|  | 1911 |  | 
| Darrick J. Wong | 2cd614c | 2007-07-24 09:33:49 -0700 | [diff] [blame] | 1912 | type = rphy->identify.device_type; | 
| FUJITA Tomonori | ba1fc17 | 2007-07-09 12:52:08 +0900 | [diff] [blame] | 1913 |  | 
|  | 1914 | if (type != SAS_EDGE_EXPANDER_DEVICE && | 
|  | 1915 | type != SAS_FANOUT_EXPANDER_DEVICE) { | 
|  | 1916 | printk("%s: can we send a smp request to a device?\n", | 
|  | 1917 | __FUNCTION__); | 
|  | 1918 | return -EINVAL; | 
|  | 1919 | } | 
|  | 1920 |  | 
|  | 1921 | dev = sas_find_dev_by_rphy(rphy); | 
|  | 1922 | if (!dev) { | 
|  | 1923 | printk("%s: fail to find a domain_device?\n", __FUNCTION__); | 
|  | 1924 | return -EINVAL; | 
|  | 1925 | } | 
|  | 1926 |  | 
|  | 1927 | /* do we need to support multiple segments? */ | 
|  | 1928 | if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { | 
|  | 1929 | printk("%s: multiple segments req %u %u, rsp %u %u\n", | 
|  | 1930 | __FUNCTION__, req->bio->bi_vcnt, req->data_len, | 
|  | 1931 | rsp->bio->bi_vcnt, rsp->data_len); | 
|  | 1932 | return -EINVAL; | 
|  | 1933 | } | 
|  | 1934 |  | 
|  | 1935 | ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, | 
|  | 1936 | bio_data(rsp->bio), rsp->data_len); | 
| James Bottomley | 2d4b63e | 2007-12-29 11:49:53 -0600 | [diff] [blame] | 1937 | if (ret > 0) { | 
|  | 1938 | /* positive number is the untransferred residual */ | 
|  | 1939 | rsp->data_len = ret; | 
|  | 1940 | req->data_len = 0; | 
|  | 1941 | ret = 0; | 
|  | 1942 | } else if (ret == 0) { | 
|  | 1943 | rsp->data_len = 0; | 
|  | 1944 | req->data_len = 0; | 
|  | 1945 | } | 
| FUJITA Tomonori | ba1fc17 | 2007-07-09 12:52:08 +0900 | [diff] [blame] | 1946 |  | 
|  | 1947 | return ret; | 
|  | 1948 | } |