blob: a484b1fb338288c2756376f31ed8bffd2aaa0997 [file] [log] [blame]
Manuel Lauss66213b32009-10-04 14:55:27 +02001/*
2 * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards.
3 *
4 * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
5 *
6 */
7
8/* This is a fairly generic PCMCIA socket driver suitable for the
9 * following Alchemy Development boards:
Manuel Lauss64cd04d2011-11-10 12:03:26 +000010 * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300
Manuel Lauss66213b32009-10-04 14:55:27 +020011 *
12 * The Db1000 is used as a reference: Per-socket card-, carddetect- and
13 * statuschange IRQs connected to SoC GPIOs, control and status register
14 * bits arranged in per-socket groups in an external PLD. All boards
15 * listed here use this layout, including bit positions and meanings.
16 * Of course there are exceptions in later boards:
17 *
18 * - Pb1100/Pb1500: single socket only; voltage key bits VS are
19 * at STATUS[5:4] (instead of STATUS[1:0]).
20 * - Au1200-based: additional card-eject irqs, irqs not gpios!
Manuel Lauss64cd04d2011-11-10 12:03:26 +000021 * - Db1300: Db1200-like, no pwr ctrl, single socket (#1).
Manuel Lauss66213b32009-10-04 14:55:27 +020022 */
23
24#include <linux/delay.h>
25#include <linux/gpio.h>
26#include <linux/interrupt.h>
27#include <linux/pm.h>
Paul Gortmaker3bf8d642011-07-28 18:44:02 -040028#include <linux/module.h>
Manuel Lauss66213b32009-10-04 14:55:27 +020029#include <linux/platform_device.h>
30#include <linux/resource.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090031#include <linux/slab.h>
Manuel Lauss66213b32009-10-04 14:55:27 +020032#include <linux/spinlock.h>
33
Manuel Lauss66213b32009-10-04 14:55:27 +020034#include <pcmcia/ss.h>
35
36#include <asm/mach-au1x00/au1000.h>
37#include <asm/mach-db1x00/bcsr.h>
38
39#define MEM_MAP_SIZE 0x400000
40#define IO_MAP_SIZE 0x1000
41
42struct db1x_pcmcia_sock {
43 struct pcmcia_socket socket;
44 int nr; /* socket number */
45 void *virt_io;
46
Manuel Lauss11b897c2010-02-24 17:40:21 +010047 phys_addr_t phys_io;
48 phys_addr_t phys_attr;
49 phys_addr_t phys_mem;
Manuel Lauss66213b32009-10-04 14:55:27 +020050
51 /* previous flags for set_socket() */
52 unsigned int old_flags;
53
54 /* interrupt sources: linux irq numbers! */
55 int insert_irq; /* default carddetect irq */
56 int stschg_irq; /* card-status-change irq */
57 int card_irq; /* card irq */
58 int eject_irq; /* db1200/pb1200 have these */
59
60#define BOARD_TYPE_DEFAULT 0 /* most boards */
61#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */
62#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */
Manuel Lauss64cd04d2011-11-10 12:03:26 +000063#define BOARD_TYPE_DB1300 3 /* no power control */
Manuel Lauss66213b32009-10-04 14:55:27 +020064 int board_type;
65};
66
67#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
68
Manuel Lauss64cd04d2011-11-10 12:03:26 +000069static int db1300_card_inserted(struct db1x_pcmcia_sock *sock)
70{
71 return bcsr_read(BCSR_SIGSTAT) & (1 << 8);
72}
73
Manuel Lauss66213b32009-10-04 14:55:27 +020074/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
75static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
76{
77 unsigned short sigstat;
78
79 sigstat = bcsr_read(BCSR_SIGSTAT);
80 return sigstat & 1 << (8 + 2 * sock->nr);
81}
82
83/* carddetect gpio: low-active */
84static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
85{
86 return !gpio_get_value(irq_to_gpio(sock->insert_irq));
87}
88
89static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
90{
91 switch (sock->board_type) {
92 case BOARD_TYPE_DB1200:
93 return db1200_card_inserted(sock);
Manuel Lauss64cd04d2011-11-10 12:03:26 +000094 case BOARD_TYPE_DB1300:
95 return db1300_card_inserted(sock);
Manuel Lauss66213b32009-10-04 14:55:27 +020096 default:
97 return db1000_card_inserted(sock);
98 }
99}
100
101/* STSCHG tends to bounce heavily when cards are inserted/ejected.
102 * To avoid this, the interrupt is normally disabled and only enabled
103 * after reset to a card has been de-asserted.
104 */
105static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en)
106{
107 if (sock->stschg_irq != -1) {
108 if (en)
109 enable_irq(sock->stschg_irq);
110 else
111 disable_irq(sock->stschg_irq);
112 }
113}
114
115static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data)
116{
117 struct db1x_pcmcia_sock *sock = data;
118
119 pcmcia_parse_events(&sock->socket, SS_DETECT);
120
121 return IRQ_HANDLED;
122}
123
124static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data)
125{
126 struct db1x_pcmcia_sock *sock = data;
127
128 pcmcia_parse_events(&sock->socket, SS_STSCHG);
129
130 return IRQ_HANDLED;
131}
132
133static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
134{
135 struct db1x_pcmcia_sock *sock = data;
136
137 /* Db/Pb1200 have separate per-socket insertion and ejection
138 * interrupts which stay asserted as long as the card is
139 * inserted/missing. The one which caused us to be called
140 * needs to be disabled and the other one enabled.
141 */
142 if (irq == sock->insert_irq) {
143 disable_irq_nosync(sock->insert_irq);
144 enable_irq(sock->eject_irq);
145 } else {
146 disable_irq_nosync(sock->eject_irq);
147 enable_irq(sock->insert_irq);
148 }
149
150 pcmcia_parse_events(&sock->socket, SS_DETECT);
151
152 return IRQ_HANDLED;
153}
154
155static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
156{
157 int ret;
Manuel Lauss66213b32009-10-04 14:55:27 +0200158
159 if (sock->stschg_irq != -1) {
160 ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
161 0, "pcmcia_stschg", sock);
162 if (ret)
163 return ret;
164 }
165
166 /* Db/Pb1200 have separate per-socket insertion and ejection
167 * interrupts, which should show edge behaviour but don't.
168 * So interrupts are disabled until both insertion and
169 * ejection handler have been registered and the currently
170 * active one disabled.
171 */
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000172 if ((sock->board_type == BOARD_TYPE_DB1200) ||
173 (sock->board_type == BOARD_TYPE_DB1300)) {
Manuel Lauss66213b32009-10-04 14:55:27 +0200174 ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
Yong Zhangd571c792011-10-22 17:56:49 +0800175 0, "pcmcia_insert", sock);
Manuel Lauss0000a532010-04-21 17:41:59 +0200176 if (ret)
Manuel Lauss66213b32009-10-04 14:55:27 +0200177 goto out1;
178
179 ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
Yong Zhangd571c792011-10-22 17:56:49 +0800180 0, "pcmcia_eject", sock);
Manuel Lauss66213b32009-10-04 14:55:27 +0200181 if (ret) {
182 free_irq(sock->insert_irq, sock);
Manuel Lauss66213b32009-10-04 14:55:27 +0200183 goto out1;
184 }
185
Manuel Lauss0000a532010-04-21 17:41:59 +0200186 /* enable the currently silent one */
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000187 if (db1x_card_inserted(sock))
Manuel Lauss0000a532010-04-21 17:41:59 +0200188 enable_irq(sock->eject_irq);
Manuel Lauss66213b32009-10-04 14:55:27 +0200189 else
Manuel Lauss0000a532010-04-21 17:41:59 +0200190 enable_irq(sock->insert_irq);
Manuel Lauss66213b32009-10-04 14:55:27 +0200191 } else {
192 /* all other (older) Db1x00 boards use a GPIO to show
193 * card detection status: use both-edge triggers.
194 */
Thomas Gleixnerdced35a2011-03-28 17:49:12 +0200195 irq_set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH);
Manuel Lauss66213b32009-10-04 14:55:27 +0200196 ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq,
197 0, "pcmcia_carddetect", sock);
198
199 if (ret)
200 goto out1;
201 }
202
203 return 0; /* all done */
204
205out1:
206 if (sock->stschg_irq != -1)
207 free_irq(sock->stschg_irq, sock);
208
209 return ret;
210}
211
212static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock)
213{
214 if (sock->stschg_irq != -1)
215 free_irq(sock->stschg_irq, sock);
216
217 free_irq(sock->insert_irq, sock);
218 if (sock->eject_irq != -1)
219 free_irq(sock->eject_irq, sock);
220}
221
222/*
223 * configure a PCMCIA socket on the Db1x00 series of boards (and
224 * compatibles).
225 *
226 * 2 external registers are involved:
227 * pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id
228 * pcmcia_control(offset 0x10):
229 * bits[0:1] set vcc for card
230 * bits[2:3] set vpp for card
231 * bit 4: enable data buffers
232 * bit 7: reset# for card
233 * add 8 for second socket.
234 */
235static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
236 struct socket_state_t *state)
237{
238 struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
239 unsigned short cr_clr, cr_set;
240 unsigned int changed;
241 int v, p, ret;
242
243 /* card voltage setup */
244 cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */
245 cr_set = 0;
246 v = p = ret = 0;
247
248 switch (state->Vcc) {
249 case 50:
250 ++v;
251 case 33:
252 ++v;
253 case 0:
254 break;
255 default:
256 printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
257 sock->nr, state->Vcc);
258 }
259
260 switch (state->Vpp) {
261 case 12:
262 ++p;
263 case 33:
264 case 50:
265 ++p;
266 case 0:
267 break;
268 default:
269 printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
270 sock->nr, state->Vpp);
271 }
272
273 /* sanity check: Vpp must be 0, 12, or Vcc */
274 if (((state->Vcc == 33) && (state->Vpp == 50)) ||
275 ((state->Vcc == 50) && (state->Vpp == 33))) {
276 printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
277 sock->nr, state->Vcc, state->Vpp);
278 v = p = 0;
279 ret = -EINVAL;
280 }
281
282 /* create new voltage code */
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000283 if (sock->board_type != BOARD_TYPE_DB1300)
284 cr_set |= ((v << 2) | p) << (sock->nr * 8);
Manuel Lauss66213b32009-10-04 14:55:27 +0200285
286 changed = state->flags ^ sock->old_flags;
287
288 if (changed & SS_RESET) {
289 if (state->flags & SS_RESET) {
290 set_stschg(sock, 0);
291 /* assert reset, disable io buffers */
292 cr_clr |= (1 << (7 + (sock->nr * 8)));
293 cr_clr |= (1 << (4 + (sock->nr * 8)));
294 } else {
295 /* de-assert reset, enable io buffers */
296 cr_set |= 1 << (7 + (sock->nr * 8));
297 cr_set |= 1 << (4 + (sock->nr * 8));
298 }
299 }
300
301 /* update PCMCIA configuration */
302 bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set);
303
304 sock->old_flags = state->flags;
305
306 /* reset was taken away: give card time to initialize properly */
307 if ((changed & SS_RESET) && !(state->flags & SS_RESET)) {
308 msleep(500);
309 set_stschg(sock, 1);
310 }
311
312 return ret;
313}
314
315/* VCC bits at [3:2]/[11:10] */
316#define GET_VCC(cr, socknr) \
317 ((((cr) >> 2) >> ((socknr) * 8)) & 3)
318
319/* VS bits at [0:1]/[3:2] */
320#define GET_VS(sr, socknr) \
321 (((sr) >> (2 * (socknr))) & 3)
322
323/* reset bits at [7]/[15] */
324#define GET_RESET(cr, socknr) \
325 ((cr) & (1 << (7 + (8 * (socknr)))))
326
327static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
328 unsigned int *value)
329{
330 struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
331 unsigned short cr, sr;
332 unsigned int status;
333
334 status = db1x_card_inserted(sock) ? SS_DETECT : 0;
335
336 cr = bcsr_read(BCSR_PCMCIA);
337 sr = bcsr_read(BCSR_STATUS);
338
339 /* PB1100/PB1500: voltage key bits are at [5:4] */
340 if (sock->board_type == BOARD_TYPE_PB1100)
341 sr >>= 4;
342
343 /* determine card type */
344 switch (GET_VS(sr, sock->nr)) {
345 case 0:
346 case 2:
347 status |= SS_3VCARD; /* 3V card */
348 case 3:
349 break; /* 5V card: set nothing */
350 default:
351 status |= SS_XVCARD; /* treated as unsupported in core */
352 }
353
354 /* if Vcc is not zero, we have applied power to a card */
355 status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
356
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000357 /* DB1300: power always on, but don't tell when no card present */
358 if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT))
359 status = SS_POWERON | SS_3VCARD | SS_DETECT;
360
Manuel Lauss66213b32009-10-04 14:55:27 +0200361 /* reset de-asserted? then we're ready */
362 status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
363
364 *value = status;
365
366 return 0;
367}
368
369static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt)
370{
371 return 0;
372}
373
374static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt)
375{
376 return 0;
377}
378
379static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
380 struct pccard_io_map *map)
381{
382 struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
383
384 map->start = (u32)sock->virt_io;
385 map->stop = map->start + IO_MAP_SIZE;
386
387 return 0;
388}
389
390static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
391 struct pccard_mem_map *map)
392{
393 struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
394
395 if (map->flags & MAP_ATTRIB)
396 map->static_start = sock->phys_attr + map->card_start;
397 else
398 map->static_start = sock->phys_mem + map->card_start;
399
400 return 0;
401}
402
403static struct pccard_operations db1x_pcmcia_operations = {
404 .init = db1x_pcmcia_sock_init,
405 .suspend = db1x_pcmcia_sock_suspend,
406 .get_status = db1x_pcmcia_get_status,
407 .set_socket = db1x_pcmcia_configure,
408 .set_io_map = au1x00_pcmcia_set_io_map,
409 .set_mem_map = au1x00_pcmcia_set_mem_map,
410};
411
412static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
413{
414 struct db1x_pcmcia_sock *sock;
415 struct resource *r;
Manuel Lauss66213b32009-10-04 14:55:27 +0200416 int ret, bid;
417
418 sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
419 if (!sock)
420 return -ENOMEM;
421
422 sock->nr = pdev->id;
423
424 bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
425 switch (bid) {
426 case BCSR_WHOAMI_PB1500:
427 case BCSR_WHOAMI_PB1500R2:
428 case BCSR_WHOAMI_PB1100:
429 sock->board_type = BOARD_TYPE_PB1100;
430 break;
431 case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR:
432 sock->board_type = BOARD_TYPE_DEFAULT;
433 break;
434 case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
435 sock->board_type = BOARD_TYPE_DB1200;
436 break;
Manuel Lauss64cd04d2011-11-10 12:03:26 +0000437 case BCSR_WHOAMI_DB1300:
438 sock->board_type = BOARD_TYPE_DB1300;
439 break;
Manuel Lauss66213b32009-10-04 14:55:27 +0200440 default:
441 printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
442 ret = -ENODEV;
443 goto out0;
444 };
445
446 /*
447 * gather resources necessary and optional nice-to-haves to
448 * operate a socket:
449 * This includes IRQs for Carddetection/ejection, the card
450 * itself and optional status change detection.
451 * Also, the memory areas covered by a socket. For these
Manuel Laussf25e1882010-03-01 21:40:56 +0100452 * we require the real 36bit addresses (see the au1000.h
Manuel Lauss66213b32009-10-04 14:55:27 +0200453 * header for more information).
454 */
455
456 /* card: irq assigned to the card itself. */
457 r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
458 sock->card_irq = r ? r->start : 0;
459
460 /* insert: irq which triggers on card insertion/ejection */
461 r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
462 sock->insert_irq = r ? r->start : -1;
463
464 /* stschg: irq which trigger on card status change (optional) */
465 r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");
466 sock->stschg_irq = r ? r->start : -1;
467
468 /* eject: irq which triggers on ejection (DB1200/PB1200 only) */
469 r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject");
470 sock->eject_irq = r ? r->start : -1;
471
472 ret = -ENODEV;
473
Manuel Laussf25e1882010-03-01 21:40:56 +0100474 /* 36bit PCMCIA Attribute area address */
Manuel Lauss11b897c2010-02-24 17:40:21 +0100475 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
Manuel Lauss66213b32009-10-04 14:55:27 +0200476 if (!r) {
477 printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
478 sock->nr);
479 goto out0;
480 }
481 sock->phys_attr = r->start;
482
Manuel Laussf25e1882010-03-01 21:40:56 +0100483 /* 36bit PCMCIA Memory area address */
Manuel Lauss11b897c2010-02-24 17:40:21 +0100484 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
Manuel Lauss66213b32009-10-04 14:55:27 +0200485 if (!r) {
486 printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
487 sock->nr);
488 goto out0;
489 }
490 sock->phys_mem = r->start;
491
Manuel Laussf25e1882010-03-01 21:40:56 +0100492 /* 36bit PCMCIA IO area address */
Manuel Lauss11b897c2010-02-24 17:40:21 +0100493 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
Manuel Lauss66213b32009-10-04 14:55:27 +0200494 if (!r) {
495 printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
496 sock->nr);
497 goto out0;
498 }
499 sock->phys_io = r->start;
500
Manuel Lauss66213b32009-10-04 14:55:27 +0200501 /*
502 * PCMCIA client drivers use the inb/outb macros to access
503 * the IO registers. Since mips_io_port_base is added
504 * to the access address of the mips implementation of
505 * inb/outb, we need to subtract it here because we want
506 * to access the I/O or MEM address directly, without
507 * going through this "mips_io_port_base" mechanism.
508 */
Manuel Lauss11b897c2010-02-24 17:40:21 +0100509 sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
Manuel Lauss66213b32009-10-04 14:55:27 +0200510 mips_io_port_base);
511
512 if (!sock->virt_io) {
513 printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
514 sock->nr);
515 ret = -ENOMEM;
516 goto out0;
517 }
518
519 sock->socket.ops = &db1x_pcmcia_operations;
520 sock->socket.owner = THIS_MODULE;
521 sock->socket.pci_irq = sock->card_irq;
522 sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
523 sock->socket.map_size = MEM_MAP_SIZE;
524 sock->socket.io_offset = (unsigned long)sock->virt_io;
525 sock->socket.dev.parent = &pdev->dev;
526 sock->socket.resource_ops = &pccard_static_ops;
527
528 platform_set_drvdata(pdev, sock);
529
530 ret = db1x_pcmcia_setup_irqs(sock);
531 if (ret) {
532 printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
533 sock->nr);
534 goto out1;
535 }
536
537 set_stschg(sock, 0);
538
539 ret = pcmcia_register_socket(&sock->socket);
540 if (ret) {
541 printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
542 goto out2;
543 }
544
Manuel Lauss11b897c2010-02-24 17:40:21 +0100545 printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
546 "(%p) %09llx %09llx card/insert/stschg/eject irqs @ %d "
Manuel Lauss66213b32009-10-04 14:55:27 +0200547 "%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
548 sock->phys_attr, sock->phys_mem, sock->card_irq,
549 sock->insert_irq, sock->stschg_irq, sock->eject_irq);
550
551 return 0;
552
553out2:
554 db1x_pcmcia_free_irqs(sock);
555out1:
556 iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
557out0:
558 kfree(sock);
559 return ret;
560}
561
562static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
563{
564 struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
565
566 db1x_pcmcia_free_irqs(sock);
567 pcmcia_unregister_socket(&sock->socket);
568 iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
569 kfree(sock);
570
571 return 0;
572}
573
Manuel Lauss66213b32009-10-04 14:55:27 +0200574static struct platform_driver db1x_pcmcia_socket_driver = {
575 .driver = {
576 .name = "db1xxx_pcmcia",
577 .owner = THIS_MODULE,
Manuel Lauss66213b32009-10-04 14:55:27 +0200578 },
579 .probe = db1x_pcmcia_socket_probe,
580 .remove = __devexit_p(db1x_pcmcia_socket_remove),
581};
582
Axel Lin5d95f8e22011-11-27 12:53:06 +0800583module_platform_driver(db1x_pcmcia_socket_driver);
Manuel Lauss66213b32009-10-04 14:55:27 +0200584
585MODULE_LICENSE("GPL");
586MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
587MODULE_AUTHOR("Manuel Lauss");