blob: d07130971b8f4bba321784ce079d51c54e905ec4 [file] [log] [blame]
Divy Le Ray4d22de32007-01-18 22:04:14 -05001/*
Divy Le Raya02d44a2008-10-13 18:47:30 -07002 * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
Divy Le Ray4d22de32007-01-18 22:04:14 -05003 *
Divy Le Ray1d68e932007-01-30 19:44:35 -08004 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
Divy Le Ray4d22de32007-01-18 22:04:14 -05009 *
Divy Le Ray1d68e932007-01-30 19:44:35 -080010 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
13 *
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
17 *
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
Divy Le Ray4d22de32007-01-18 22:04:14 -050031 */
Divy Le Ray4d22de32007-01-18 22:04:14 -050032#include "common.h"
33
34/* VSC8211 PHY specific registers. */
35enum {
Divy Le Ray0ce2f032008-10-08 17:40:28 -070036 VSC8211_SIGDET_CTRL = 19,
37 VSC8211_EXT_CTRL = 23,
Divy Le Ray4d22de32007-01-18 22:04:14 -050038 VSC8211_INTR_ENABLE = 25,
39 VSC8211_INTR_STATUS = 26,
Divy Le Ray0ce2f032008-10-08 17:40:28 -070040 VSC8211_LED_CTRL = 27,
Divy Le Ray4d22de32007-01-18 22:04:14 -050041 VSC8211_AUX_CTRL_STAT = 28,
Divy Le Ray0ce2f032008-10-08 17:40:28 -070042 VSC8211_EXT_PAGE_AXS = 31,
Divy Le Ray4d22de32007-01-18 22:04:14 -050043};
44
45enum {
46 VSC_INTR_RX_ERR = 1 << 0,
Divy Le Ray0ce2f032008-10-08 17:40:28 -070047 VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
48 VSC_INTR_CABLE = 1 << 2, /* cable impairment */
49 VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
50 VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
51 VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
52 VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
53 VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
54 VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
55 VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
56 VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
57 VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
58 VSC_INTR_LINK_CHG = 1 << 13, /* link change */
59 VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
60 VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
61};
62
63enum {
64 VSC_CTRL_CLAUSE37_VIEW = 1 << 4, /* Switch to Clause 37 view */
65 VSC_CTRL_MEDIA_MODE_HI = 0xf000 /* High part of media mode select */
Divy Le Ray4d22de32007-01-18 22:04:14 -050066};
67
68#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
Divy Le Ray0ce2f032008-10-08 17:40:28 -070069 VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
Divy Le Ray4d22de32007-01-18 22:04:14 -050070 VSC_INTR_NEG_DONE)
71#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
72 VSC_INTR_ENABLE)
73
74/* PHY specific auxiliary control & status register fields */
75#define S_ACSR_ACTIPHY_TMR 0
76#define M_ACSR_ACTIPHY_TMR 0x3
77#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
78
79#define S_ACSR_SPEED 3
80#define M_ACSR_SPEED 0x3
81#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
82
83#define S_ACSR_DUPLEX 5
84#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
85
86#define S_ACSR_ACTIPHY 6
87#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
88
89/*
90 * Reset the PHY. This PHY completes reset immediately so we never wait.
91 */
92static int vsc8211_reset(struct cphy *cphy, int wait)
93{
94 return t3_phy_reset(cphy, 0, 0);
95}
96
97static int vsc8211_intr_enable(struct cphy *cphy)
98{
99 return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
100}
101
102static int vsc8211_intr_disable(struct cphy *cphy)
103{
104 return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
105}
106
107static int vsc8211_intr_clear(struct cphy *cphy)
108{
109 u32 val;
110
111 /* Clear PHY interrupts by reading the register. */
112 return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
113}
114
115static int vsc8211_autoneg_enable(struct cphy *cphy)
116{
117 return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
118 BMCR_ANENABLE | BMCR_ANRESTART);
119}
120
121static int vsc8211_autoneg_restart(struct cphy *cphy)
122{
123 return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
124 BMCR_ANRESTART);
125}
126
127static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
128 int *speed, int *duplex, int *fc)
129{
130 unsigned int bmcr, status, lpa, adv;
131 int err, sp = -1, dplx = -1, pause = 0;
132
133 err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
134 if (!err)
135 err = mdio_read(cphy, 0, MII_BMSR, &status);
136 if (err)
137 return err;
138
139 if (link_ok) {
140 /*
141 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
142 * once more to get the current link state.
143 */
144 if (!(status & BMSR_LSTATUS))
145 err = mdio_read(cphy, 0, MII_BMSR, &status);
146 if (err)
147 return err;
148 *link_ok = (status & BMSR_LSTATUS) != 0;
149 }
150 if (!(bmcr & BMCR_ANENABLE)) {
151 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
152 if (bmcr & BMCR_SPEED1000)
153 sp = SPEED_1000;
154 else if (bmcr & BMCR_SPEED100)
155 sp = SPEED_100;
156 else
157 sp = SPEED_10;
158 } else if (status & BMSR_ANEGCOMPLETE) {
159 err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
160 if (err)
161 return err;
162
163 dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
164 sp = G_ACSR_SPEED(status);
165 if (sp == 0)
166 sp = SPEED_10;
167 else if (sp == 1)
168 sp = SPEED_100;
169 else
170 sp = SPEED_1000;
171
172 if (fc && dplx == DUPLEX_FULL) {
173 err = mdio_read(cphy, 0, MII_LPA, &lpa);
174 if (!err)
175 err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
176 if (err)
177 return err;
178
179 if (lpa & adv & ADVERTISE_PAUSE_CAP)
180 pause = PAUSE_RX | PAUSE_TX;
181 else if ((lpa & ADVERTISE_PAUSE_CAP) &&
182 (lpa & ADVERTISE_PAUSE_ASYM) &&
183 (adv & ADVERTISE_PAUSE_ASYM))
184 pause = PAUSE_TX;
185 else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
186 (adv & ADVERTISE_PAUSE_CAP))
187 pause = PAUSE_RX;
188 }
189 }
190 if (speed)
191 *speed = sp;
192 if (duplex)
193 *duplex = dplx;
194 if (fc)
195 *fc = pause;
196 return 0;
197}
198
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700199static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
200 int *speed, int *duplex, int *fc)
201{
202 unsigned int bmcr, status, lpa, adv;
203 int err, sp = -1, dplx = -1, pause = 0;
204
205 err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
206 if (!err)
207 err = mdio_read(cphy, 0, MII_BMSR, &status);
208 if (err)
209 return err;
210
211 if (link_ok) {
212 /*
213 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
214 * once more to get the current link state.
215 */
216 if (!(status & BMSR_LSTATUS))
217 err = mdio_read(cphy, 0, MII_BMSR, &status);
218 if (err)
219 return err;
220 *link_ok = (status & BMSR_LSTATUS) != 0;
221 }
222 if (!(bmcr & BMCR_ANENABLE)) {
223 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
224 if (bmcr & BMCR_SPEED1000)
225 sp = SPEED_1000;
226 else if (bmcr & BMCR_SPEED100)
227 sp = SPEED_100;
228 else
229 sp = SPEED_10;
230 } else if (status & BMSR_ANEGCOMPLETE) {
231 err = mdio_read(cphy, 0, MII_LPA, &lpa);
232 if (!err)
233 err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
234 if (err)
235 return err;
236
237 if (adv & lpa & ADVERTISE_1000XFULL) {
238 dplx = DUPLEX_FULL;
239 sp = SPEED_1000;
240 } else if (adv & lpa & ADVERTISE_1000XHALF) {
241 dplx = DUPLEX_HALF;
242 sp = SPEED_1000;
243 }
244
245 if (fc && dplx == DUPLEX_FULL) {
246 if (lpa & adv & ADVERTISE_1000XPAUSE)
247 pause = PAUSE_RX | PAUSE_TX;
248 else if ((lpa & ADVERTISE_1000XPAUSE) &&
249 (adv & lpa & ADVERTISE_1000XPSE_ASYM))
250 pause = PAUSE_TX;
251 else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
252 (adv & ADVERTISE_1000XPAUSE))
253 pause = PAUSE_RX;
254 }
255 }
256 if (speed)
257 *speed = sp;
258 if (duplex)
259 *duplex = dplx;
260 if (fc)
261 *fc = pause;
262 return 0;
263}
264
Hannes Ederaf8eca52008-12-25 23:59:28 -0800265#ifdef UNUSED
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700266/*
267 * Enable/disable auto MDI/MDI-X in forced link speed mode.
268 */
269static int vsc8211_set_automdi(struct cphy *phy, int enable)
270{
271 int err;
272
273 err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
274 if (err)
275 return err;
276
277 err = mdio_write(phy, 0, 18, 0x12);
278 if (err)
279 return err;
280
281 err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
282 if (err)
283 return err;
284
285 err = mdio_write(phy, 0, 16, 0x87fa);
286 if (err)
287 return err;
288
289 err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
290 if (err)
291 return err;
292
293 return 0;
294}
295
296int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
297{
298 int err;
299
300 err = t3_set_phy_speed_duplex(phy, speed, duplex);
301 if (!err)
302 err = vsc8211_set_automdi(phy, 1);
303 return err;
304}
Hannes Ederaf8eca52008-12-25 23:59:28 -0800305#endif /* UNUSED */
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700306
Divy Le Ray4d22de32007-01-18 22:04:14 -0500307static int vsc8211_power_down(struct cphy *cphy, int enable)
308{
309 return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
310 enable ? BMCR_PDOWN : 0);
311}
312
313static int vsc8211_intr_handler(struct cphy *cphy)
314{
315 unsigned int cause;
316 int err, cphy_cause = 0;
317
318 err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
319 if (err)
320 return err;
321
322 cause &= INTR_MASK;
323 if (cause & CFG_CHG_INTR_MASK)
324 cphy_cause |= cphy_cause_link_change;
325 if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
326 cphy_cause |= cphy_cause_fifo_error;
327 return cphy_cause;
328}
329
330static struct cphy_ops vsc8211_ops = {
331 .reset = vsc8211_reset,
332 .intr_enable = vsc8211_intr_enable,
333 .intr_disable = vsc8211_intr_disable,
334 .intr_clear = vsc8211_intr_clear,
335 .intr_handler = vsc8211_intr_handler,
336 .autoneg_enable = vsc8211_autoneg_enable,
337 .autoneg_restart = vsc8211_autoneg_restart,
338 .advertise = t3_phy_advertise,
339 .set_speed_duplex = t3_set_phy_speed_duplex,
340 .get_link_status = vsc8211_get_link_status,
341 .power_down = vsc8211_power_down,
342};
343
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700344static struct cphy_ops vsc8211_fiber_ops = {
345 .reset = vsc8211_reset,
346 .intr_enable = vsc8211_intr_enable,
347 .intr_disable = vsc8211_intr_disable,
348 .intr_clear = vsc8211_intr_clear,
349 .intr_handler = vsc8211_intr_handler,
350 .autoneg_enable = vsc8211_autoneg_enable,
351 .autoneg_restart = vsc8211_autoneg_restart,
352 .advertise = t3_phy_advertise_fiber,
353 .set_speed_duplex = t3_set_phy_speed_duplex,
354 .get_link_status = vsc8211_get_link_status_fiber,
355 .power_down = vsc8211_power_down,
356};
357
Divy Le Ray78e46892008-10-08 17:38:01 -0700358int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
359 int phy_addr, const struct mdio_ops *mdio_ops)
Divy Le Ray4d22de32007-01-18 22:04:14 -0500360{
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700361 int err;
362 unsigned int val;
363
Divy Le Ray04497982008-10-08 17:38:29 -0700364 cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
365 SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
366 SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
367 SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
Divy Le Ray0ce2f032008-10-08 17:40:28 -0700368 msleep(20); /* PHY needs ~10ms to start responding to MDIO */
369
370 err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
371 if (err)
372 return err;
373 if (val & VSC_CTRL_MEDIA_MODE_HI) {
374 /* copper interface, just need to configure the LEDs */
375 return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
376 }
377
378 phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
379 SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
380 phy->desc = "1000BASE-X";
381 phy->ops = &vsc8211_fiber_ops;
382
383 err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
384 if (err)
385 return err;
386
387 err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
388 if (err)
389 return err;
390
391 err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
392 if (err)
393 return err;
394
395 err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
396 val | VSC_CTRL_CLAUSE37_VIEW);
397 if (err)
398 return err;
399
400 err = vsc8211_reset(phy, 0);
401 if (err)
402 return err;
403
404 udelay(5); /* delay after reset before next SMI */
Divy Le Ray78e46892008-10-08 17:38:01 -0700405 return 0;
Divy Le Ray4d22de32007-01-18 22:04:14 -0500406}