blob: 41a2fa1fa12e549f75f094505ca044a19b56088d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +00003 * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
Linus Torvalds1da177e2005-04-16 15:20:36 -07004 *
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +00005 * Written by Ralf Baechle and Andreas Busse, modified for DECstation
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 * support by Paul Antoine and Harald Koerfgen.
7 *
8 * completly rewritten:
9 * Copyright (C) 1998 Harald Koerfgen
10 *
11 * Rewritten extensively for controller-driven IRQ support
12 * by Maciej W. Rozycki.
13 */
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +000014
Linus Torvalds1da177e2005-04-16 15:20:36 -070015#include <asm/addrspace.h>
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +000016#include <asm/asm.h>
17#include <asm/mipsregs.h>
18#include <asm/regdef.h>
19#include <asm/stackframe.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070020
21#include <asm/dec/interrupts.h>
22#include <asm/dec/ioasic_addrs.h>
23#include <asm/dec/ioasic_ints.h>
24#include <asm/dec/kn01.h>
25#include <asm/dec/kn02.h>
26#include <asm/dec/kn02xa.h>
27#include <asm/dec/kn03.h>
28
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +000029#define KN02_CSR_BASE CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
30#define KN02XA_IOASIC_BASE CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
31#define KN03_IOASIC_BASE CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33 .text
34 .set noreorder
35/*
Ralf Baechlee4ac58a2006-04-03 17:56:36 +010036 * plat_irq_dispatch: Interrupt handler for DECstations
Linus Torvalds1da177e2005-04-16 15:20:36 -070037 *
38 * We follow the model in the Indy interrupt code by David Miller, where he
39 * says: a lot of complication here is taken away because:
40 *
41 * 1) We handle one interrupt and return, sitting in a loop
42 * and moving across all the pending IRQ bits in the cause
43 * register is _NOT_ the answer, the common case is one
44 * pending IRQ so optimize in that direction.
45 *
46 * 2) We need not check against bits in the status register
47 * IRQ mask, that would make this routine slow as hell.
48 *
49 * 3) Linux only thinks in terms of all IRQs on or all IRQs
50 * off, nothing in between like BSD spl() brain-damage.
51 *
Maciej W. Rozyckia5fc9c02005-07-01 16:10:40 +000052 * Furthermore, the IRQs on the DECstations look basically (barring
Linus Torvalds1da177e2005-04-16 15:20:36 -070053 * software IRQs which we don't use at all) like...
54 *
55 * DS2100/3100's, aka kn01, aka Pmax:
56 *
57 * MIPS IRQ Source
Ralf Baechle70342282013-01-22 12:59:30 +010058 * -------- ------
59 * 0 Software (ignored)
60 * 1 Software (ignored)
61 * 2 SCSI
62 * 3 Lance Ethernet
63 * 4 DZ11 serial
64 * 5 RTC
65 * 6 Memory Controller & Video
66 * 7 FPU
Linus Torvalds1da177e2005-04-16 15:20:36 -070067 *
68 * DS5000/200, aka kn02, aka 3max:
69 *
70 * MIPS IRQ Source
Ralf Baechle70342282013-01-22 12:59:30 +010071 * -------- ------
72 * 0 Software (ignored)
73 * 1 Software (ignored)
74 * 2 TurboChannel
75 * 3 RTC
76 * 4 Reserved
77 * 5 Memory Controller
78 * 6 Reserved
79 * 7 FPU
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 *
81 * DS5000/1xx's, aka kn02ba, aka 3min:
82 *
83 * MIPS IRQ Source
Ralf Baechle70342282013-01-22 12:59:30 +010084 * -------- ------
85 * 0 Software (ignored)
86 * 1 Software (ignored)
87 * 2 TurboChannel Slot 0
88 * 3 TurboChannel Slot 1
89 * 4 TurboChannel Slot 2
90 * 5 TurboChannel Slot 3 (ASIC)
91 * 6 Halt button
92 * 7 FPU/R4k timer
Linus Torvalds1da177e2005-04-16 15:20:36 -070093 *
94 * DS5000/2x's, aka kn02ca, aka maxine:
95 *
96 * MIPS IRQ Source
Ralf Baechle70342282013-01-22 12:59:30 +010097 * -------- ------
98 * 0 Software (ignored)
99 * 1 Software (ignored)
100 * 2 Periodic Interrupt (100usec)
101 * 3 RTC
102 * 4 I/O write timeout
103 * 5 TurboChannel (ASIC)
104 * 6 Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER)
105 * 7 FPU/R4k timer
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106 *
107 * DS5000/2xx's, aka kn03, aka 3maxplus:
108 *
109 * MIPS IRQ Source
Ralf Baechle70342282013-01-22 12:59:30 +0100110 * -------- ------
111 * 0 Software (ignored)
112 * 1 Software (ignored)
113 * 2 System Board (ASIC)
114 * 3 RTC
115 * 4 Reserved
116 * 5 Memory
117 * 6 Halt Button
118 * 7 FPU/R4k timer
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 *
120 * We handle the IRQ according to _our_ priority (see setup.c),
Maciej W. Rozycki07217d72013-09-22 21:58:50 +0100121 * then we just return. If multiple IRQs are pending then we will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122 * just take another exception, big deal.
123 */
124 .align 5
Ralf Baechlee4ac58a2006-04-03 17:56:36 +0100125 NESTED(plat_irq_dispatch, PT_SIZE, ra)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126 .set noreorder
127
128 /*
129 * Get pending Interrupts
130 */
131 mfc0 t0,CP0_CAUSE # get pending interrupts
132 mfc0 t1,CP0_STATUS
Ralf Baechle875d43e2005-09-03 15:56:16 -0700133#ifdef CONFIG_32BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 lw t2,cpu_fpu_mask
135#endif
136 andi t0,ST0_IM # CAUSE.CE may be non-zero!
137 and t0,t1 # isolate allowed ones
138
139 beqz t0,spurious
140
Ralf Baechle875d43e2005-09-03 15:56:16 -0700141#ifdef CONFIG_32BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142 and t2,t0
143 bnez t2,fpu # handle FPU immediately
144#endif
145
146 /*
147 * Find irq with highest priority
148 */
Maciej W. Rozycki07217d72013-09-22 21:58:50 +0100149 PTR_LA t1,cpu_mask_nr_tbl
Linus Torvalds1da177e2005-04-16 15:20:36 -07001501: lw t2,(t1)
151 nop
152 and t2,t0
153 beqz t2,1b
154 addu t1,2*PTRSIZE # delay slot
155
156 /*
157 * Do the low-level stuff
158 */
159 lw a0,(-PTRSIZE)(t1)
160 nop
161 bgez a0,handle_it # irq_nr >= 0?
162 # irq_nr < 0: it is an address
163 nop
164 jr a0
165 # a trick to save a branch:
166 lui t2,(KN03_IOASIC_BASE>>16)&0xffff
167 # upper part of IOASIC Address
168
169/*
170 * Handle "IRQ Controller" Interrupts
171 * Masked Interrupts are still visible and have to be masked "by hand".
172 */
173 FEXPORT(kn02_io_int) # 3max
174 lui t0,(KN02_CSR_BASE>>16)&0xffff
175 # get interrupt status and mask
176 lw t0,(t0)
177 nop
178 andi t1,t0,KN02_IRQ_ALL
179 b 1f
180 srl t0,16 # shift interrupt mask
181
182 FEXPORT(kn02xa_io_int) # 3min/maxine
183 lui t2,(KN02XA_IOASIC_BASE>>16)&0xffff
184 # upper part of IOASIC Address
185
186 FEXPORT(kn03_io_int) # 3max+ (t2 loaded earlier)
187 lw t0,IO_REG_SIR(t2) # get status: IOASIC sir
188 lw t1,IO_REG_SIMR(t2) # get mask: IOASIC simr
189 nop
190
1911: and t0,t1 # mask out allowed ones
192
193 beqz t0,spurious
194
195 /*
196 * Find irq with highest priority
197 */
Maciej W. Rozycki07217d72013-09-22 21:58:50 +0100198 PTR_LA t1,asic_mask_nr_tbl
Linus Torvalds1da177e2005-04-16 15:20:36 -07001992: lw t2,(t1)
200 nop
201 and t2,t0
202 beq zero,t2,2b
203 addu t1,2*PTRSIZE # delay slot
204
205 /*
206 * Do the low-level stuff
207 */
208 lw a0,%lo(-PTRSIZE)(t1)
209 nop
210 bgez a0,handle_it # irq_nr >= 0?
211 # irq_nr < 0: it is an address
212 nop
213 jr a0
214 nop # delay slot
215
216/*
217 * Dispatch low-priority interrupts. We reconsider all status
218 * bits again, which looks like a lose, but it makes the code
219 * simple and O(log n), so it gets compensated.
220 */
221 FEXPORT(cpu_all_int) # HALT, timers, software junk
222 li a0,DEC_CPU_IRQ_BASE
223 srl t0,CAUSEB_IP
Maciej W. Rozycki07217d72013-09-22 21:58:50 +0100224 li t1,CAUSEF_IP>>CAUSEB_IP # mask
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225 b 1f
226 li t2,4 # nr of bits / 2
227
228 FEXPORT(kn02_all_int) # impossible ?
229 li a0,KN02_IRQ_BASE
230 li t1,KN02_IRQ_ALL # mask
231 b 1f
232 li t2,4 # nr of bits / 2
233
234 FEXPORT(asic_all_int) # various I/O ASIC junk
235 li a0,IO_IRQ_BASE
236 li t1,IO_IRQ_ALL # mask
237 b 1f
238 li t2,8 # nr of bits / 2
239
240/*
241 * Dispatch DMA interrupts -- O(log n).
242 */
243 FEXPORT(asic_dma_int) # I/O ASIC DMA events
244 li a0,IO_IRQ_BASE+IO_INR_DMA
245 srl t0,IO_INR_DMA
246 li t1,IO_IRQ_DMA>>IO_INR_DMA # mask
247 li t2,8 # nr of bits / 2
248
249 /*
250 * Find irq with highest priority.
251 * Highest irq number takes precedence.
252 */
2531: srlv t3,t1,t2
2542: xor t1,t3
255 and t3,t0,t1
256 beqz t3,3f
257 nop
258 move t0,t3
259 addu a0,t2
2603: srl t2,1
261 bnez t2,2b
262 srlv t3,t1,t2
263
264handle_it:
Atsushi Nemoto187933f2006-10-25 23:57:04 +0900265 j dec_irq_dispatch
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 nop
267
Ralf Baechle875d43e2005-09-03 15:56:16 -0700268#ifdef CONFIG_32BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269fpu:
270 j handle_fpe_int
271 nop
272#endif
273
274spurious:
Atsushi Nemotof431baa2006-10-09 01:24:23 +0900275 j spurious_interrupt
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276 nop
Ralf Baechlee4ac58a2006-04-03 17:56:36 +0100277 END(plat_irq_dispatch)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700278
279/*
280 * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl
281 * and asic_mask_nr_tbl are initialized to point all interrupts here.
282 * The tables are then filled in by machine-specific initialisation
283 * in dec_setup().
284 */
285 FEXPORT(dec_intr_unimplemented)
286 move a1,t0 # cheats way of printing an arg!
287 PANIC("Unimplemented cpu interrupt! CP0_CAUSE: 0x%08x");
288
289 FEXPORT(asic_intr_unimplemented)
290 move a1,t0 # cheats way of printing an arg!
291 PANIC("Unimplemented asic interrupt! ASIC ISR: 0x%08x");