blob: 17fe083fcb6fa985cec4f108036ad490e11b785d [file] [log] [blame]
David Howellsdaeb51e2008-02-08 04:19:48 -08001/* Handle mapping of the flash on the ASB2303 board
2 *
3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public Licence
8 * as published by the Free Software Foundation; either version
9 * 2 of the Licence, or (at your option) any later version.
10 */
11#include <linux/init.h>
12#include <linux/platform_device.h>
13#include <linux/mtd/partitions.h>
14#include <linux/mtd/physmap.h>
15
16#define ASB2303_PROM_ADDR 0xA0000000 /* Boot PROM */
17#define ASB2303_PROM_SIZE (2 * 1024 * 1024)
18#define ASB2303_FLASH_ADDR 0xA4000000 /* System Flash */
19#define ASB2303_FLASH_SIZE (32 * 1024 * 1024)
20#define ASB2303_CONFIG_ADDR 0xA6000000 /* System Config EEPROM */
21#define ASB2303_CONFIG_SIZE (8 * 1024)
22
23/*
24 * default MTD partition table for both main flash devices, expected to be
25 * overridden by RedBoot
26 */
27static struct mtd_partition asb2303_partitions[] = {
28 {
29 .name = "Bootloader",
30 .size = 0x00040000,
31 .offset = 0,
32 .mask_flags = MTD_CAP_ROM /* force read-only */
33 }, {
34 .name = "Kernel",
35 .size = 0x00400000,
36 .offset = 0x00040000,
37 }, {
38 .name = "Filesystem",
39 .size = MTDPART_SIZ_FULL,
40 .offset = 0x00440000
41 }
42};
43
44/*
45 * the ASB2303 Boot PROM definition
46 */
47static struct physmap_flash_data asb2303_bootprom_data = {
48 .width = 2,
49 .nr_parts = 1,
50 .parts = asb2303_partitions,
51};
52
53static struct resource asb2303_bootprom_resource = {
54 .start = ASB2303_PROM_ADDR,
55 .end = ASB2303_PROM_ADDR + ASB2303_PROM_SIZE,
56 .flags = IORESOURCE_MEM,
57};
58
59static struct platform_device asb2303_bootprom = {
60 .name = "physmap-flash",
61 .id = 0,
62 .dev.platform_data = &asb2303_bootprom_data,
63 .num_resources = 1,
64 .resource = &asb2303_bootprom_resource,
65};
66
67/*
68 * the ASB2303 System Flash definition
69 */
70static struct physmap_flash_data asb2303_sysflash_data = {
71 .width = 4,
72 .nr_parts = 1,
73 .parts = asb2303_partitions,
74};
75
76static struct resource asb2303_sysflash_resource = {
77 .start = ASB2303_FLASH_ADDR,
78 .end = ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE,
79 .flags = IORESOURCE_MEM,
80};
81
82static struct platform_device asb2303_sysflash = {
83 .name = "physmap-flash",
84 .id = 1,
85 .dev.platform_data = &asb2303_sysflash_data,
86 .num_resources = 1,
87 .resource = &asb2303_sysflash_resource,
88};
89
90/*
91 * register the ASB2303 flashes
92 */
93static int __init asb2303_mtd_init(void)
94{
95 platform_device_register(&asb2303_bootprom);
96 platform_device_register(&asb2303_sysflash);
97 return 0;
98}
99
100module_init(asb2303_mtd_init);