blob: f1533d91953a9fe160145f58da488ef979492ac8 [file] [log] [blame]
Kumar Galab053dc52009-06-19 08:31:05 -05001Marvell Discovery mv64[345]6x System Controller chips
2===========================================================
3
4The Marvell mv64[345]60 series of system controller chips contain
5many of the peripherals needed to implement a complete computer
6system. In this section, we define device tree nodes to describe
7the system controller chip itself and each of the peripherals
8which it contains. Compatible string values for each node are
9prefixed with the string "marvell,", for Marvell Technology Group Ltd.
10
111) The /system-controller node
12
13 This node is used to represent the system-controller and must be
14 present when the system uses a system controller chip. The top-level
15 system-controller node contains information that is global to all
16 devices within the system controller chip. The node name begins
17 with "system-controller" followed by the unit address, which is
18 the base address of the memory-mapped register set for the system
19 controller chip.
20
21 Required properties:
22
23 - ranges : Describes the translation of system controller addresses
24 for memory mapped registers.
25 - clock-frequency: Contains the main clock frequency for the system
26 controller chip.
27 - reg : This property defines the address and size of the
28 memory-mapped registers contained within the system controller
29 chip. The address specified in the "reg" property should match
30 the unit address of the system-controller node.
31 - #address-cells : Address representation for system controller
32 devices. This field represents the number of cells needed to
33 represent the address of the memory-mapped registers of devices
34 within the system controller chip.
Anand Gadiyar411c9402009-07-07 15:24:23 +053035 - #size-cells : Size representation for the memory-mapped
Kumar Galab053dc52009-06-19 08:31:05 -050036 registers within the system controller chip.
37 - #interrupt-cells : Defines the width of cells used to represent
38 interrupts.
39
40 Optional properties:
41
42 - model : The specific model of the system controller chip. Such
43 as, "mv64360", "mv64460", or "mv64560".
44 - compatible : A string identifying the compatibility identifiers
45 of the system controller chip.
46
47 The system-controller node contains child nodes for each system
48 controller device that the platform uses. Nodes should not be created
49 for devices which exist on the system controller chip but are not used
50
51 Example Marvell Discovery mv64360 system-controller node:
52
53 system-controller@f1000000 { /* Marvell Discovery mv64360 */
54 #address-cells = <1>;
55 #size-cells = <1>;
56 model = "mv64360"; /* Default */
57 compatible = "marvell,mv64360";
58 clock-frequency = <133333333>;
59 reg = <0xf1000000 0x10000>;
60 virtual-reg = <0xf1000000>;
61 ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
62 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
63 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
64 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
65 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
66
67 [ child node definitions... ]
68 }
69
702) Child nodes of /system-controller
71
72 a) Marvell Discovery MDIO bus
73
74 The MDIO is a bus to which the PHY devices are connected. For each
75 device that exists on this bus, a child node should be created. See
76 the definition of the PHY node below for an example of how to define
77 a PHY.
78
79 Required properties:
80 - #address-cells : Should be <1>
81 - #size-cells : Should be <0>
82 - device_type : Should be "mdio"
83 - compatible : Should be "marvell,mv64360-mdio"
84
85 Example:
86
87 mdio {
88 #address-cells = <1>;
89 #size-cells = <0>;
90 device_type = "mdio";
91 compatible = "marvell,mv64360-mdio";
92
93 ethernet-phy@0 {
94 ......
95 };
96 };
97
98
99 b) Marvell Discovery ethernet controller
100
101 The Discover ethernet controller is described with two levels
102 of nodes. The first level describes an ethernet silicon block
103 and the second level describes up to 3 ethernet nodes within
104 that block. The reason for the multiple levels is that the
105 registers for the node are interleaved within a single set
106 of registers. The "ethernet-block" level describes the
107 shared register set, and the "ethernet" nodes describe ethernet
108 port-specific properties.
109
110 Ethernet block node
111
112 Required properties:
113 - #address-cells : <1>
114 - #size-cells : <0>
115 - compatible : "marvell,mv64360-eth-block"
116 - reg : Offset and length of the register set for this block
117
118 Example Discovery Ethernet block node:
119 ethernet-block@2000 {
120 #address-cells = <1>;
121 #size-cells = <0>;
122 compatible = "marvell,mv64360-eth-block";
123 reg = <0x2000 0x2000>;
124 ethernet@0 {
125 .......
126 };
127 };
128
129 Ethernet port node
130
131 Required properties:
132 - device_type : Should be "network".
133 - compatible : Should be "marvell,mv64360-eth".
134 - reg : Should be <0>, <1>, or <2>, according to which registers
135 within the silicon block the device uses.
136 - interrupts : <a> where a is the interrupt number for the port.
137 - interrupt-parent : the phandle for the interrupt controller
138 that services interrupts for this device.
139 - phy : the phandle for the PHY connected to this ethernet
140 controller.
141 - local-mac-address : 6 bytes, MAC address
142
143 Example Discovery Ethernet port node:
144 ethernet@0 {
145 device_type = "network";
146 compatible = "marvell,mv64360-eth";
147 reg = <0>;
148 interrupts = <32>;
149 interrupt-parent = <&PIC>;
150 phy = <&PHY0>;
151 local-mac-address = [ 00 00 00 00 00 00 ];
152 };
153
154
155
156 c) Marvell Discovery PHY nodes
157
158 Required properties:
159 - device_type : Should be "ethernet-phy"
160 - interrupts : <a> where a is the interrupt number for this phy.
161 - interrupt-parent : the phandle for the interrupt controller that
162 services interrupts for this device.
163 - reg : The ID number for the phy, usually a small integer
164
165 Example Discovery PHY node:
166 ethernet-phy@1 {
167 device_type = "ethernet-phy";
168 compatible = "broadcom,bcm5421";
169 interrupts = <76>; /* GPP 12 */
170 interrupt-parent = <&PIC>;
171 reg = <1>;
172 };
173
174
175 d) Marvell Discovery SDMA nodes
176
177 Represent DMA hardware associated with the MPSC (multiprotocol
178 serial controllers).
179
180 Required properties:
181 - compatible : "marvell,mv64360-sdma"
182 - reg : Offset and length of the register set for this device
183 - interrupts : <a> where a is the interrupt number for the DMA
184 device.
185 - interrupt-parent : the phandle for the interrupt controller
186 that services interrupts for this device.
187
188 Example Discovery SDMA node:
189 sdma@4000 {
190 compatible = "marvell,mv64360-sdma";
191 reg = <0x4000 0xc18>;
192 virtual-reg = <0xf1004000>;
193 interrupts = <36>;
194 interrupt-parent = <&PIC>;
195 };
196
197
198 e) Marvell Discovery BRG nodes
199
200 Represent baud rate generator hardware associated with the MPSC
201 (multiprotocol serial controllers).
202
203 Required properties:
204 - compatible : "marvell,mv64360-brg"
205 - reg : Offset and length of the register set for this device
206 - clock-src : A value from 0 to 15 which selects the clock
207 source for the baud rate generator. This value corresponds
208 to the CLKS value in the BRGx configuration register. See
209 the mv64x60 User's Manual.
210 - clock-frequence : The frequency (in Hz) of the baud rate
211 generator's input clock.
212 - current-speed : The current speed setting (presumably by
213 firmware) of the baud rate generator.
214
215 Example Discovery BRG node:
216 brg@b200 {
217 compatible = "marvell,mv64360-brg";
218 reg = <0xb200 0x8>;
219 clock-src = <8>;
220 clock-frequency = <133333333>;
221 current-speed = <9600>;
222 };
223
224
225 f) Marvell Discovery CUNIT nodes
226
227 Represent the Serial Communications Unit device hardware.
228
229 Required properties:
230 - reg : Offset and length of the register set for this device
231
232 Example Discovery CUNIT node:
233 cunit@f200 {
234 reg = <0xf200 0x200>;
235 };
236
237
238 g) Marvell Discovery MPSCROUTING nodes
239
240 Represent the Discovery's MPSC routing hardware
241
242 Required properties:
243 - reg : Offset and length of the register set for this device
244
245 Example Discovery CUNIT node:
246 mpscrouting@b500 {
247 reg = <0xb400 0xc>;
248 };
249
250
251 h) Marvell Discovery MPSCINTR nodes
252
253 Represent the Discovery's MPSC DMA interrupt hardware registers
254 (SDMA cause and mask registers).
255
256 Required properties:
257 - reg : Offset and length of the register set for this device
258
259 Example Discovery MPSCINTR node:
260 mpsintr@b800 {
261 reg = <0xb800 0x100>;
262 };
263
264
265 i) Marvell Discovery MPSC nodes
266
267 Represent the Discovery's MPSC (Multiprotocol Serial Controller)
268 serial port.
269
270 Required properties:
271 - device_type : "serial"
272 - compatible : "marvell,mv64360-mpsc"
273 - reg : Offset and length of the register set for this device
274 - sdma : the phandle for the SDMA node used by this port
275 - brg : the phandle for the BRG node used by this port
276 - cunit : the phandle for the CUNIT node used by this port
277 - mpscrouting : the phandle for the MPSCROUTING node used by this port
278 - mpscintr : the phandle for the MPSCINTR node used by this port
279 - cell-index : the hardware index of this cell in the MPSC core
280 - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
281 register
282 - interrupts : <a> where a is the interrupt number for the MPSC.
283 - interrupt-parent : the phandle for the interrupt controller
284 that services interrupts for this device.
285
286 Example Discovery MPSCINTR node:
287 mpsc@8000 {
288 device_type = "serial";
289 compatible = "marvell,mv64360-mpsc";
290 reg = <0x8000 0x38>;
291 virtual-reg = <0xf1008000>;
292 sdma = <&SDMA0>;
293 brg = <&BRG0>;
294 cunit = <&CUNIT>;
295 mpscrouting = <&MPSCROUTING>;
296 mpscintr = <&MPSCINTR>;
297 cell-index = <0>;
298 max_idle = <40>;
299 interrupts = <40>;
300 interrupt-parent = <&PIC>;
301 };
302
303
304 j) Marvell Discovery Watch Dog Timer nodes
305
306 Represent the Discovery's watchdog timer hardware
307
308 Required properties:
309 - compatible : "marvell,mv64360-wdt"
310 - reg : Offset and length of the register set for this device
311
312 Example Discovery Watch Dog Timer node:
313 wdt@b410 {
314 compatible = "marvell,mv64360-wdt";
315 reg = <0xb410 0x8>;
316 };
317
318
319 k) Marvell Discovery I2C nodes
320
321 Represent the Discovery's I2C hardware
322
323 Required properties:
324 - device_type : "i2c"
325 - compatible : "marvell,mv64360-i2c"
326 - reg : Offset and length of the register set for this device
327 - interrupts : <a> where a is the interrupt number for the I2C.
328 - interrupt-parent : the phandle for the interrupt controller
329 that services interrupts for this device.
330
331 Example Discovery I2C node:
332 compatible = "marvell,mv64360-i2c";
333 reg = <0xc000 0x20>;
334 virtual-reg = <0xf100c000>;
335 interrupts = <37>;
336 interrupt-parent = <&PIC>;
337 };
338
339
340 l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
341
342 Represent the Discovery's PIC hardware
343
344 Required properties:
345 - #interrupt-cells : <1>
346 - #address-cells : <0>
347 - compatible : "marvell,mv64360-pic"
348 - reg : Offset and length of the register set for this device
349 - interrupt-controller
350
351 Example Discovery PIC node:
352 pic {
353 #interrupt-cells = <1>;
354 #address-cells = <0>;
355 compatible = "marvell,mv64360-pic";
356 reg = <0x0 0x88>;
357 interrupt-controller;
358 };
359
360
361 m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
362
363 Represent the Discovery's MPP hardware
364
365 Required properties:
366 - compatible : "marvell,mv64360-mpp"
367 - reg : Offset and length of the register set for this device
368
369 Example Discovery MPP node:
370 mpp@f000 {
371 compatible = "marvell,mv64360-mpp";
372 reg = <0xf000 0x10>;
373 };
374
375
376 n) Marvell Discovery GPP (General Purpose Pins) nodes
377
378 Represent the Discovery's GPP hardware
379
380 Required properties:
381 - compatible : "marvell,mv64360-gpp"
382 - reg : Offset and length of the register set for this device
383
384 Example Discovery GPP node:
385 gpp@f000 {
386 compatible = "marvell,mv64360-gpp";
387 reg = <0xf100 0x20>;
388 };
389
390
391 o) Marvell Discovery PCI host bridge node
392
393 Represents the Discovery's PCI host bridge device. The properties
394 for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
395 1275-1994. A typical value for the compatible property is
396 "marvell,mv64360-pci".
397
398 Example Discovery PCI host bridge node
399 pci@80000000 {
400 #address-cells = <3>;
401 #size-cells = <2>;
402 #interrupt-cells = <1>;
403 device_type = "pci";
404 compatible = "marvell,mv64360-pci";
405 reg = <0xcf8 0x8>;
406 ranges = <0x01000000 0x0 0x0
407 0x88000000 0x0 0x01000000
408 0x02000000 0x0 0x80000000
409 0x80000000 0x0 0x08000000>;
410 bus-range = <0 255>;
411 clock-frequency = <66000000>;
412 interrupt-parent = <&PIC>;
413 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
414 interrupt-map = <
415 /* IDSEL 0x0a */
416 0x5000 0 0 1 &PIC 80
417 0x5000 0 0 2 &PIC 81
418 0x5000 0 0 3 &PIC 91
419 0x5000 0 0 4 &PIC 93
420
421 /* IDSEL 0x0b */
422 0x5800 0 0 1 &PIC 91
423 0x5800 0 0 2 &PIC 93
424 0x5800 0 0 3 &PIC 80
425 0x5800 0 0 4 &PIC 81
426
427 /* IDSEL 0x0c */
428 0x6000 0 0 1 &PIC 91
429 0x6000 0 0 2 &PIC 93
430 0x6000 0 0 3 &PIC 80
431 0x6000 0 0 4 &PIC 81
432
433 /* IDSEL 0x0d */
434 0x6800 0 0 1 &PIC 93
435 0x6800 0 0 2 &PIC 80
436 0x6800 0 0 3 &PIC 81
437 0x6800 0 0 4 &PIC 91
438 >;
439 };
440
441
442 p) Marvell Discovery CPU Error nodes
443
444 Represent the Discovery's CPU error handler device.
445
446 Required properties:
447 - compatible : "marvell,mv64360-cpu-error"
448 - reg : Offset and length of the register set for this device
449 - interrupts : the interrupt number for this device
450 - interrupt-parent : the phandle for the interrupt controller
451 that services interrupts for this device.
452
453 Example Discovery CPU Error node:
454 cpu-error@0070 {
455 compatible = "marvell,mv64360-cpu-error";
456 reg = <0x70 0x10 0x128 0x28>;
457 interrupts = <3>;
458 interrupt-parent = <&PIC>;
459 };
460
461
462 q) Marvell Discovery SRAM Controller nodes
463
464 Represent the Discovery's SRAM controller device.
465
466 Required properties:
467 - compatible : "marvell,mv64360-sram-ctrl"
468 - reg : Offset and length of the register set for this device
469 - interrupts : the interrupt number for this device
470 - interrupt-parent : the phandle for the interrupt controller
471 that services interrupts for this device.
472
473 Example Discovery SRAM Controller node:
474 sram-ctrl@0380 {
475 compatible = "marvell,mv64360-sram-ctrl";
476 reg = <0x380 0x80>;
477 interrupts = <13>;
478 interrupt-parent = <&PIC>;
479 };
480
481
482 r) Marvell Discovery PCI Error Handler nodes
483
484 Represent the Discovery's PCI error handler device.
485
486 Required properties:
487 - compatible : "marvell,mv64360-pci-error"
488 - reg : Offset and length of the register set for this device
489 - interrupts : the interrupt number for this device
490 - interrupt-parent : the phandle for the interrupt controller
491 that services interrupts for this device.
492
493 Example Discovery PCI Error Handler node:
494 pci-error@1d40 {
495 compatible = "marvell,mv64360-pci-error";
496 reg = <0x1d40 0x40 0xc28 0x4>;
497 interrupts = <12>;
498 interrupt-parent = <&PIC>;
499 };
500
501
502 s) Marvell Discovery Memory Controller nodes
503
504 Represent the Discovery's memory controller device.
505
506 Required properties:
507 - compatible : "marvell,mv64360-mem-ctrl"
508 - reg : Offset and length of the register set for this device
509 - interrupts : the interrupt number for this device
510 - interrupt-parent : the phandle for the interrupt controller
511 that services interrupts for this device.
512
513 Example Discovery Memory Controller node:
514 mem-ctrl@1400 {
515 compatible = "marvell,mv64360-mem-ctrl";
516 reg = <0x1400 0x60>;
517 interrupts = <17>;
518 interrupt-parent = <&PIC>;
519 };
520
521