blob: 0688472500bbabb1274a55c1ab0720d39b10922b [file] [log] [blame]
Michael Bueschaab547c2008-02-29 11:36:12 +01001#ifndef LINUX_SSB_DRIVER_GIGE_H_
2#define LINUX_SSB_DRIVER_GIGE_H_
3
4#include <linux/ssb/ssb.h>
Paul Gortmaker187f1882011-11-23 20:12:59 -05005#include <linux/bug.h>
Michael Bueschaab547c2008-02-29 11:36:12 +01006#include <linux/pci.h>
7#include <linux/spinlock.h>
8
9
10#ifdef CONFIG_SSB_DRIVER_GIGE
11
12
13#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
14#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
15#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
16#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
17#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
18#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
19#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
20#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
21#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
22
23/* TM Status High flags */
24#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
25/* TM Status Low flags */
26#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
27#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
28#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
29
30/* Boardflags (low) */
31#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
32
33
34#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
35#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
36
37struct ssb_gige {
38 struct ssb_device *dev;
39
40 spinlock_t lock;
41
42 /* True, if the device has an RGMII bus.
43 * False, if the device has a GMII bus. */
44 bool has_rgmii;
45
46 /* The PCI controller device. */
47 struct pci_controller pci_controller;
48 struct pci_ops pci_ops;
49 struct resource mem_resource;
50 struct resource io_resource;
51};
52
53/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
54extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
55
56/* Convert a pci_dev pointer to a ssb_gige pointer. */
57static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
58{
59 if (!pdev_is_ssb_gige_core(pdev))
60 return NULL;
61 return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
62}
63
64/* Returns whether the PHY is connected by an RGMII bus. */
65static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
66{
67 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
68 return (dev ? dev->has_rgmii : 0);
69}
70
71/* Returns whether we have a Roboswitch. */
72static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
73{
74 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
75 if (dev)
76 return !!(dev->dev->bus->sprom.boardflags_lo &
77 SSB_GIGE_BFL_ROBOSWITCH);
78 return 0;
79}
80
81/* Returns whether we can only do one DMA at once. */
82static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
83{
84 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
85 if (dev)
86 return ((dev->dev->bus->chip_id == 0x4785) &&
87 (dev->dev->bus->chip_rev < 2));
88 return 0;
89}
90
91/* Returns whether we must flush posted writes. */
92static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
93{
94 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
95 if (dev)
96 return (dev->dev->bus->chip_id == 0x4785);
97 return 0;
98}
99
Michael Bueschaab547c2008-02-29 11:36:12 +0100100/* Get the device MAC address */
Hauke Mehrtens180996c2013-02-07 05:37:37 +0000101static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
Michael Bueschaab547c2008-02-29 11:36:12 +0100102{
Hauke Mehrtens180996c2013-02-07 05:37:37 +0000103 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
104 if (!dev)
105 return -ENODEV;
106
107 memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
108 return 0;
Michael Bueschaab547c2008-02-29 11:36:12 +0100109}
Michael Bueschaab547c2008-02-29 11:36:12 +0100110
Hauke Mehrtens4bcef892013-09-28 23:15:27 +0200111/* Get the device phy address */
112static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev)
113{
114 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
115 if (!dev)
116 return -ENODEV;
117
118 return dev->dev->bus->sprom.et0phyaddr;
119}
120
Michael Bueschaab547c2008-02-29 11:36:12 +0100121extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
122 struct pci_dev *pdev);
123extern int ssb_gige_map_irq(struct ssb_device *sdev,
124 const struct pci_dev *pdev);
125
126/* The GigE driver is not a standalone module, because we don't have support
127 * for unregistering the driver. So we could not unload the module anyway. */
128extern int ssb_gige_init(void);
129static inline void ssb_gige_exit(void)
130{
131 /* Currently we can not unregister the GigE driver,
132 * because we can not unregister the PCI bridge. */
133 BUG();
134}
135
136
137#else /* CONFIG_SSB_DRIVER_GIGE */
138/* Gigabit Ethernet driver disabled */
139
140
141static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
142 struct pci_dev *pdev)
143{
144 return -ENOSYS;
145}
146static inline int ssb_gige_map_irq(struct ssb_device *sdev,
147 const struct pci_dev *pdev)
148{
149 return -ENOSYS;
150}
151static inline int ssb_gige_init(void)
152{
153 return 0;
154}
155static inline void ssb_gige_exit(void)
156{
157}
158
159static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
160{
161 return 0;
162}
163static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
164{
165 return NULL;
166}
167static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
168{
169 return 0;
170}
171static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
172{
173 return 0;
174}
175static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
176{
177 return 0;
178}
179static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
180{
181 return 0;
182}
Hauke Mehrtens180996c2013-02-07 05:37:37 +0000183static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
184{
185 return -ENODEV;
186}
Hauke Mehrtens4bcef892013-09-28 23:15:27 +0200187static inline int ssb_gige_get_phyaddr(struct pci_dev *pdev)
188{
189 return -ENODEV;
190}
Michael Bueschaab547c2008-02-29 11:36:12 +0100191
192#endif /* CONFIG_SSB_DRIVER_GIGE */
193#endif /* LINUX_SSB_DRIVER_GIGE_H_ */