Rajeev Kumar | 0942a71 | 2011-05-26 16:25:09 -0700 | [diff] [blame] | 1 | /* |
| 2 | * drivers/rtc/rtc-spear.c |
| 3 | * |
| 4 | * Copyright (C) 2010 ST Microelectronics |
| 5 | * Rajeev Kumar<rajeev-dlh.kumar@st.com> |
| 6 | * |
| 7 | * This file is licensed under the terms of the GNU General Public |
| 8 | * License version 2. This program is licensed "as is" without any |
| 9 | * warranty of any kind, whether express or implied. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/bcd.h> |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/delay.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/io.h> |
| 17 | #include <linux/irq.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/rtc.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/spinlock.h> |
| 23 | |
| 24 | /* RTC registers */ |
| 25 | #define TIME_REG 0x00 |
| 26 | #define DATE_REG 0x04 |
| 27 | #define ALARM_TIME_REG 0x08 |
| 28 | #define ALARM_DATE_REG 0x0C |
| 29 | #define CTRL_REG 0x10 |
| 30 | #define STATUS_REG 0x14 |
| 31 | |
| 32 | /* TIME_REG & ALARM_TIME_REG */ |
| 33 | #define SECONDS_UNITS (0xf<<0) /* seconds units position */ |
| 34 | #define SECONDS_TENS (0x7<<4) /* seconds tens position */ |
| 35 | #define MINUTES_UNITS (0xf<<8) /* minutes units position */ |
| 36 | #define MINUTES_TENS (0x7<<12) /* minutes tens position */ |
| 37 | #define HOURS_UNITS (0xf<<16) /* hours units position */ |
| 38 | #define HOURS_TENS (0x3<<20) /* hours tens position */ |
| 39 | |
| 40 | /* DATE_REG & ALARM_DATE_REG */ |
| 41 | #define DAYS_UNITS (0xf<<0) /* days units position */ |
| 42 | #define DAYS_TENS (0x3<<4) /* days tens position */ |
| 43 | #define MONTHS_UNITS (0xf<<8) /* months units position */ |
| 44 | #define MONTHS_TENS (0x1<<12) /* months tens position */ |
| 45 | #define YEARS_UNITS (0xf<<16) /* years units position */ |
| 46 | #define YEARS_TENS (0xf<<20) /* years tens position */ |
| 47 | #define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */ |
| 48 | #define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */ |
| 49 | |
| 50 | /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/ |
| 51 | #define SECOND_SHIFT 0x00 /* seconds units */ |
| 52 | #define MINUTE_SHIFT 0x08 /* minutes units position */ |
| 53 | #define HOUR_SHIFT 0x10 /* hours units position */ |
| 54 | #define MDAY_SHIFT 0x00 /* Month day shift */ |
| 55 | #define MONTH_SHIFT 0x08 /* Month shift */ |
| 56 | #define YEAR_SHIFT 0x10 /* Year shift */ |
| 57 | |
| 58 | #define SECOND_MASK 0x7F |
| 59 | #define MIN_MASK 0x7F |
| 60 | #define HOUR_MASK 0x3F |
| 61 | #define DAY_MASK 0x3F |
| 62 | #define MONTH_MASK 0x7F |
| 63 | #define YEAR_MASK 0xFFFF |
| 64 | |
| 65 | /* date reg equal to time reg, for debug only */ |
| 66 | #define TIME_BYP (1<<9) |
| 67 | #define INT_ENABLE (1<<31) /* interrupt enable */ |
| 68 | |
| 69 | /* STATUS_REG */ |
| 70 | #define CLK_UNCONNECTED (1<<0) |
| 71 | #define PEND_WR_TIME (1<<2) |
| 72 | #define PEND_WR_DATE (1<<3) |
| 73 | #define LOST_WR_TIME (1<<4) |
| 74 | #define LOST_WR_DATE (1<<5) |
| 75 | #define RTC_INT_MASK (1<<31) |
| 76 | #define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE) |
| 77 | #define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE) |
| 78 | |
| 79 | struct spear_rtc_config { |
| 80 | struct clk *clk; |
| 81 | spinlock_t lock; |
| 82 | void __iomem *ioaddr; |
| 83 | }; |
| 84 | |
| 85 | static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config) |
| 86 | { |
| 87 | unsigned int val; |
| 88 | unsigned long flags; |
| 89 | |
| 90 | spin_lock_irqsave(&config->lock, flags); |
| 91 | val = readl(config->ioaddr + STATUS_REG); |
| 92 | val |= RTC_INT_MASK; |
| 93 | writel(val, config->ioaddr + STATUS_REG); |
| 94 | spin_unlock_irqrestore(&config->lock, flags); |
| 95 | } |
| 96 | |
| 97 | static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config) |
| 98 | { |
| 99 | unsigned int val; |
| 100 | |
| 101 | val = readl(config->ioaddr + CTRL_REG); |
| 102 | if (!(val & INT_ENABLE)) { |
| 103 | spear_rtc_clear_interrupt(config); |
| 104 | val |= INT_ENABLE; |
| 105 | writel(val, config->ioaddr + CTRL_REG); |
| 106 | } |
| 107 | } |
| 108 | |
| 109 | static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config) |
| 110 | { |
| 111 | unsigned int val; |
| 112 | |
| 113 | val = readl(config->ioaddr + CTRL_REG); |
| 114 | if (val & INT_ENABLE) { |
| 115 | val &= ~INT_ENABLE; |
| 116 | writel(val, config->ioaddr + CTRL_REG); |
| 117 | } |
| 118 | } |
| 119 | |
| 120 | static inline int is_write_complete(struct spear_rtc_config *config) |
| 121 | { |
| 122 | int ret = 0; |
| 123 | unsigned long flags; |
| 124 | |
| 125 | spin_lock_irqsave(&config->lock, flags); |
| 126 | if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL) |
| 127 | ret = -EIO; |
| 128 | spin_unlock_irqrestore(&config->lock, flags); |
| 129 | |
| 130 | return ret; |
| 131 | } |
| 132 | |
| 133 | static void rtc_wait_not_busy(struct spear_rtc_config *config) |
| 134 | { |
| 135 | int status, count = 0; |
| 136 | unsigned long flags; |
| 137 | |
| 138 | /* Assuming BUSY may stay active for 80 msec) */ |
| 139 | for (count = 0; count < 80; count++) { |
| 140 | spin_lock_irqsave(&config->lock, flags); |
| 141 | status = readl(config->ioaddr + STATUS_REG); |
| 142 | spin_unlock_irqrestore(&config->lock, flags); |
| 143 | if ((status & STATUS_BUSY) == 0) |
| 144 | break; |
| 145 | /* check status busy, after each msec */ |
| 146 | msleep(1); |
| 147 | } |
| 148 | } |
| 149 | |
| 150 | static irqreturn_t spear_rtc_irq(int irq, void *dev_id) |
| 151 | { |
| 152 | struct rtc_device *rtc = (struct rtc_device *)dev_id; |
| 153 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 154 | unsigned long flags, events = 0; |
| 155 | unsigned int irq_data; |
| 156 | |
| 157 | spin_lock_irqsave(&config->lock, flags); |
| 158 | irq_data = readl(config->ioaddr + STATUS_REG); |
| 159 | spin_unlock_irqrestore(&config->lock, flags); |
| 160 | |
| 161 | if ((irq_data & RTC_INT_MASK)) { |
| 162 | spear_rtc_clear_interrupt(config); |
| 163 | events = RTC_IRQF | RTC_AF; |
| 164 | rtc_update_irq(rtc, 1, events); |
| 165 | return IRQ_HANDLED; |
| 166 | } else |
| 167 | return IRQ_NONE; |
| 168 | |
| 169 | } |
| 170 | |
| 171 | static int tm2bcd(struct rtc_time *tm) |
| 172 | { |
| 173 | if (rtc_valid_tm(tm) != 0) |
| 174 | return -EINVAL; |
| 175 | tm->tm_sec = bin2bcd(tm->tm_sec); |
| 176 | tm->tm_min = bin2bcd(tm->tm_min); |
| 177 | tm->tm_hour = bin2bcd(tm->tm_hour); |
| 178 | tm->tm_mday = bin2bcd(tm->tm_mday); |
| 179 | tm->tm_mon = bin2bcd(tm->tm_mon + 1); |
| 180 | tm->tm_year = bin2bcd(tm->tm_year); |
| 181 | |
| 182 | return 0; |
| 183 | } |
| 184 | |
| 185 | static void bcd2tm(struct rtc_time *tm) |
| 186 | { |
| 187 | tm->tm_sec = bcd2bin(tm->tm_sec); |
| 188 | tm->tm_min = bcd2bin(tm->tm_min); |
| 189 | tm->tm_hour = bcd2bin(tm->tm_hour); |
| 190 | tm->tm_mday = bcd2bin(tm->tm_mday); |
| 191 | tm->tm_mon = bcd2bin(tm->tm_mon) - 1; |
| 192 | /* epoch == 1900 */ |
| 193 | tm->tm_year = bcd2bin(tm->tm_year); |
| 194 | } |
| 195 | |
| 196 | /* |
| 197 | * spear_rtc_read_time - set the time |
| 198 | * @dev: rtc device in use |
| 199 | * @tm: holds date and time |
| 200 | * |
| 201 | * This function read time and date. On success it will return 0 |
| 202 | * otherwise -ve error is returned. |
| 203 | */ |
| 204 | static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 205 | { |
| 206 | struct platform_device *pdev = to_platform_device(dev); |
| 207 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 208 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 209 | unsigned int time, date; |
| 210 | |
| 211 | /* we don't report wday/yday/isdst ... */ |
| 212 | rtc_wait_not_busy(config); |
| 213 | |
| 214 | time = readl(config->ioaddr + TIME_REG); |
| 215 | date = readl(config->ioaddr + DATE_REG); |
| 216 | tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; |
| 217 | tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; |
| 218 | tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; |
| 219 | tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; |
| 220 | tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; |
| 221 | tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; |
| 222 | |
| 223 | bcd2tm(tm); |
| 224 | return 0; |
| 225 | } |
| 226 | |
| 227 | /* |
| 228 | * spear_rtc_set_time - set the time |
| 229 | * @dev: rtc device in use |
| 230 | * @tm: holds date and time |
| 231 | * |
| 232 | * This function set time and date. On success it will return 0 |
| 233 | * otherwise -ve error is returned. |
| 234 | */ |
| 235 | static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 236 | { |
| 237 | struct platform_device *pdev = to_platform_device(dev); |
| 238 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 239 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 240 | unsigned int time, date, err = 0; |
| 241 | |
| 242 | if (tm2bcd(tm) < 0) |
| 243 | return -EINVAL; |
| 244 | |
| 245 | rtc_wait_not_busy(config); |
| 246 | time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) | |
| 247 | (tm->tm_hour << HOUR_SHIFT); |
| 248 | date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) | |
| 249 | (tm->tm_year << YEAR_SHIFT); |
| 250 | writel(time, config->ioaddr + TIME_REG); |
| 251 | writel(date, config->ioaddr + DATE_REG); |
| 252 | err = is_write_complete(config); |
| 253 | if (err < 0) |
| 254 | return err; |
| 255 | |
| 256 | return 0; |
| 257 | } |
| 258 | |
| 259 | /* |
| 260 | * spear_rtc_read_alarm - read the alarm time |
| 261 | * @dev: rtc device in use |
| 262 | * @alm: holds alarm date and time |
| 263 | * |
| 264 | * This function read alarm time and date. On success it will return 0 |
| 265 | * otherwise -ve error is returned. |
| 266 | */ |
| 267 | static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| 268 | { |
| 269 | struct platform_device *pdev = to_platform_device(dev); |
| 270 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 271 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 272 | unsigned int time, date; |
| 273 | |
| 274 | rtc_wait_not_busy(config); |
| 275 | |
| 276 | time = readl(config->ioaddr + ALARM_TIME_REG); |
| 277 | date = readl(config->ioaddr + ALARM_DATE_REG); |
| 278 | alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; |
| 279 | alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; |
| 280 | alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; |
| 281 | alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; |
| 282 | alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; |
| 283 | alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; |
| 284 | |
| 285 | bcd2tm(&alm->time); |
| 286 | alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE; |
| 287 | |
| 288 | return 0; |
| 289 | } |
| 290 | |
| 291 | /* |
| 292 | * spear_rtc_set_alarm - set the alarm time |
| 293 | * @dev: rtc device in use |
| 294 | * @alm: holds alarm date and time |
| 295 | * |
| 296 | * This function set alarm time and date. On success it will return 0 |
| 297 | * otherwise -ve error is returned. |
| 298 | */ |
| 299 | static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| 300 | { |
| 301 | struct platform_device *pdev = to_platform_device(dev); |
| 302 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 303 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 304 | unsigned int time, date, err = 0; |
| 305 | |
| 306 | if (tm2bcd(&alm->time) < 0) |
| 307 | return -EINVAL; |
| 308 | |
| 309 | rtc_wait_not_busy(config); |
| 310 | |
| 311 | time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min << |
| 312 | MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT); |
| 313 | date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon << |
| 314 | MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT); |
| 315 | |
| 316 | writel(time, config->ioaddr + ALARM_TIME_REG); |
| 317 | writel(date, config->ioaddr + ALARM_DATE_REG); |
| 318 | err = is_write_complete(config); |
| 319 | if (err < 0) |
| 320 | return err; |
| 321 | |
| 322 | if (alm->enabled) |
| 323 | spear_rtc_enable_interrupt(config); |
| 324 | else |
| 325 | spear_rtc_disable_interrupt(config); |
| 326 | |
| 327 | return 0; |
| 328 | } |
| 329 | static struct rtc_class_ops spear_rtc_ops = { |
| 330 | .read_time = spear_rtc_read_time, |
| 331 | .set_time = spear_rtc_set_time, |
| 332 | .read_alarm = spear_rtc_read_alarm, |
| 333 | .set_alarm = spear_rtc_set_alarm, |
| 334 | }; |
| 335 | |
| 336 | static int __devinit spear_rtc_probe(struct platform_device *pdev) |
| 337 | { |
| 338 | struct resource *res; |
| 339 | struct rtc_device *rtc; |
| 340 | struct spear_rtc_config *config; |
| 341 | unsigned int status = 0; |
| 342 | int irq; |
| 343 | |
| 344 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 345 | if (!res) { |
| 346 | dev_err(&pdev->dev, "no resource defined\n"); |
| 347 | return -EBUSY; |
| 348 | } |
| 349 | if (!request_mem_region(res->start, resource_size(res), pdev->name)) { |
| 350 | dev_err(&pdev->dev, "rtc region already claimed\n"); |
| 351 | return -EBUSY; |
| 352 | } |
| 353 | |
| 354 | config = kzalloc(sizeof(*config), GFP_KERNEL); |
| 355 | if (!config) { |
| 356 | dev_err(&pdev->dev, "out of memory\n"); |
| 357 | status = -ENOMEM; |
| 358 | goto err_release_region; |
| 359 | } |
| 360 | |
| 361 | config->clk = clk_get(&pdev->dev, NULL); |
| 362 | if (IS_ERR(config->clk)) { |
| 363 | status = PTR_ERR(config->clk); |
| 364 | goto err_kfree; |
| 365 | } |
| 366 | |
| 367 | status = clk_enable(config->clk); |
| 368 | if (status < 0) |
| 369 | goto err_clk_put; |
| 370 | |
| 371 | config->ioaddr = ioremap(res->start, resource_size(res)); |
| 372 | if (!config->ioaddr) { |
| 373 | dev_err(&pdev->dev, "ioremap fail\n"); |
| 374 | status = -ENOMEM; |
| 375 | goto err_disable_clock; |
| 376 | } |
| 377 | |
| 378 | spin_lock_init(&config->lock); |
| 379 | |
| 380 | rtc = rtc_device_register(pdev->name, &pdev->dev, &spear_rtc_ops, |
| 381 | THIS_MODULE); |
| 382 | if (IS_ERR(rtc)) { |
| 383 | dev_err(&pdev->dev, "can't register RTC device, err %ld\n", |
| 384 | PTR_ERR(rtc)); |
| 385 | status = PTR_ERR(rtc); |
| 386 | goto err_iounmap; |
| 387 | } |
| 388 | |
| 389 | platform_set_drvdata(pdev, rtc); |
| 390 | dev_set_drvdata(&rtc->dev, config); |
| 391 | |
| 392 | /* alarm irqs */ |
| 393 | irq = platform_get_irq(pdev, 0); |
| 394 | if (irq < 0) { |
| 395 | dev_err(&pdev->dev, "no update irq?\n"); |
| 396 | status = irq; |
| 397 | goto err_clear_platdata; |
| 398 | } |
| 399 | |
| 400 | status = request_irq(irq, spear_rtc_irq, 0, pdev->name, rtc); |
| 401 | if (status) { |
| 402 | dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \ |
| 403 | claimed\n", irq); |
| 404 | goto err_clear_platdata; |
| 405 | } |
| 406 | |
| 407 | if (!device_can_wakeup(&pdev->dev)) |
| 408 | device_init_wakeup(&pdev->dev, 1); |
| 409 | |
| 410 | return 0; |
| 411 | |
| 412 | err_clear_platdata: |
| 413 | platform_set_drvdata(pdev, NULL); |
| 414 | dev_set_drvdata(&rtc->dev, NULL); |
| 415 | rtc_device_unregister(rtc); |
| 416 | err_iounmap: |
| 417 | iounmap(config->ioaddr); |
| 418 | err_disable_clock: |
| 419 | clk_disable(config->clk); |
| 420 | err_clk_put: |
| 421 | clk_put(config->clk); |
| 422 | err_kfree: |
| 423 | kfree(config); |
| 424 | err_release_region: |
| 425 | release_mem_region(res->start, resource_size(res)); |
| 426 | |
| 427 | return status; |
| 428 | } |
| 429 | |
| 430 | static int __devexit spear_rtc_remove(struct platform_device *pdev) |
| 431 | { |
| 432 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 433 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 434 | int irq; |
| 435 | struct resource *res; |
| 436 | |
| 437 | /* leave rtc running, but disable irqs */ |
| 438 | spear_rtc_disable_interrupt(config); |
| 439 | device_init_wakeup(&pdev->dev, 0); |
| 440 | irq = platform_get_irq(pdev, 0); |
| 441 | if (irq) |
| 442 | free_irq(irq, pdev); |
| 443 | clk_disable(config->clk); |
| 444 | clk_put(config->clk); |
| 445 | iounmap(config->ioaddr); |
| 446 | kfree(config); |
| 447 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 448 | if (res) |
| 449 | release_mem_region(res->start, resource_size(res)); |
| 450 | platform_set_drvdata(pdev, NULL); |
| 451 | dev_set_drvdata(&rtc->dev, NULL); |
| 452 | rtc_device_unregister(rtc); |
| 453 | |
| 454 | return 0; |
| 455 | } |
| 456 | |
| 457 | #ifdef CONFIG_PM |
| 458 | |
| 459 | static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state) |
| 460 | { |
| 461 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 462 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 463 | int irq; |
| 464 | |
| 465 | irq = platform_get_irq(pdev, 0); |
| 466 | if (device_may_wakeup(&pdev->dev)) |
| 467 | enable_irq_wake(irq); |
| 468 | else { |
| 469 | spear_rtc_disable_interrupt(config); |
| 470 | clk_disable(config->clk); |
| 471 | } |
| 472 | |
| 473 | return 0; |
| 474 | } |
| 475 | |
| 476 | static int spear_rtc_resume(struct platform_device *pdev) |
| 477 | { |
| 478 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 479 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 480 | int irq; |
| 481 | |
| 482 | irq = platform_get_irq(pdev, 0); |
| 483 | |
| 484 | if (device_may_wakeup(&pdev->dev)) |
| 485 | disable_irq_wake(irq); |
| 486 | else { |
| 487 | clk_enable(config->clk); |
| 488 | spear_rtc_enable_interrupt(config); |
| 489 | } |
| 490 | |
| 491 | return 0; |
| 492 | } |
| 493 | |
| 494 | #else |
| 495 | #define spear_rtc_suspend NULL |
| 496 | #define spear_rtc_resume NULL |
| 497 | #endif |
| 498 | |
| 499 | static void spear_rtc_shutdown(struct platform_device *pdev) |
| 500 | { |
| 501 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
| 502 | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); |
| 503 | |
| 504 | spear_rtc_disable_interrupt(config); |
| 505 | clk_disable(config->clk); |
| 506 | } |
| 507 | |
| 508 | static struct platform_driver spear_rtc_driver = { |
| 509 | .probe = spear_rtc_probe, |
| 510 | .remove = __devexit_p(spear_rtc_remove), |
| 511 | .suspend = spear_rtc_suspend, |
| 512 | .resume = spear_rtc_resume, |
| 513 | .shutdown = spear_rtc_shutdown, |
| 514 | .driver = { |
| 515 | .name = "rtc-spear", |
| 516 | }, |
| 517 | }; |
| 518 | |
Axel Lin | 0c4eae6 | 2012-01-10 15:10:48 -0800 | [diff] [blame] | 519 | module_platform_driver(spear_rtc_driver); |
Rajeev Kumar | 0942a71 | 2011-05-26 16:25:09 -0700 | [diff] [blame] | 520 | |
| 521 | MODULE_ALIAS("platform:rtc-spear"); |
| 522 | MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>"); |
| 523 | MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)"); |
| 524 | MODULE_LICENSE("GPL"); |