R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1 | /* |
| 2 | w83792d.c - Part of lm_sensors, Linux kernel modules for hardware |
| 3 | monitoring |
| 4 | Copyright (C) 2004, 2005 Winbond Electronics Corp. |
| 5 | Chunhao Huang <DZShen@Winbond.com.tw>, |
Jean Delvare | 7188cc6 | 2006-12-12 18:18:30 +0100 | [diff] [blame] | 6 | Rudolf Marek <r.marek@assembler.cz> |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 7 | |
| 8 | This program is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; either version 2 of the License, or |
| 11 | (at your option) any later version. |
| 12 | |
| 13 | This program is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with this program; if not, write to the Free Software |
| 20 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | |
| 22 | Note: |
| 23 | 1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver. |
| 24 | 2. This driver is only for Winbond W83792D C version device, there |
| 25 | are also some motherboards with B version W83792D device. The |
| 26 | calculation method to in6-in7(measured value, limits) is a little |
| 27 | different between C and B version. C or B version can be identified |
| 28 | by CR[0x49h]. |
| 29 | */ |
| 30 | |
| 31 | /* |
| 32 | Supports following chips: |
| 33 | |
| 34 | Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA |
| 35 | w83792d 9 7 7 3 0x7a 0x5ca3 yes no |
| 36 | */ |
| 37 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 38 | #include <linux/module.h> |
| 39 | #include <linux/init.h> |
| 40 | #include <linux/slab.h> |
| 41 | #include <linux/i2c.h> |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 42 | #include <linux/hwmon.h> |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 43 | #include <linux/hwmon-sysfs.h> |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 44 | #include <linux/err.h> |
Ingo Molnar | 9a61bf6 | 2006-01-18 23:19:26 +0100 | [diff] [blame] | 45 | #include <linux/mutex.h> |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 46 | #include <linux/sysfs.h> |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 47 | |
| 48 | /* Addresses to scan */ |
Mark M. Hoffman | 25e9c86 | 2008-02-17 22:28:03 -0500 | [diff] [blame] | 49 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, |
| 50 | I2C_CLIENT_END }; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 51 | |
| 52 | /* Insmod parameters */ |
Jean Delvare | 3aed198 | 2009-01-07 16:37:32 +0100 | [diff] [blame] | 53 | |
| 54 | static unsigned short force_subclients[4]; |
| 55 | module_param_array(force_subclients, short, NULL, 0); |
| 56 | MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 57 | "{bus, clientaddr, subclientaddr1, subclientaddr2}"); |
| 58 | |
Rusty Russell | 90ab5ee | 2012-01-13 09:32:20 +1030 | [diff] [blame] | 59 | static bool init; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 60 | module_param(init, bool, 0); |
| 61 | MODULE_PARM_DESC(init, "Set to one to force chip initialization"); |
| 62 | |
| 63 | /* The W83792D registers */ |
| 64 | static const u8 W83792D_REG_IN[9] = { |
| 65 | 0x20, /* Vcore A in DataSheet */ |
| 66 | 0x21, /* Vcore B in DataSheet */ |
| 67 | 0x22, /* VIN0 in DataSheet */ |
| 68 | 0x23, /* VIN1 in DataSheet */ |
| 69 | 0x24, /* VIN2 in DataSheet */ |
| 70 | 0x25, /* VIN3 in DataSheet */ |
| 71 | 0x26, /* 5VCC in DataSheet */ |
| 72 | 0xB0, /* 5VSB in DataSheet */ |
| 73 | 0xB1 /* VBAT in DataSheet */ |
| 74 | }; |
| 75 | #define W83792D_REG_LOW_BITS1 0x3E /* Low Bits I in DataSheet */ |
| 76 | #define W83792D_REG_LOW_BITS2 0x3F /* Low Bits II in DataSheet */ |
| 77 | static const u8 W83792D_REG_IN_MAX[9] = { |
| 78 | 0x2B, /* Vcore A High Limit in DataSheet */ |
| 79 | 0x2D, /* Vcore B High Limit in DataSheet */ |
| 80 | 0x2F, /* VIN0 High Limit in DataSheet */ |
| 81 | 0x31, /* VIN1 High Limit in DataSheet */ |
| 82 | 0x33, /* VIN2 High Limit in DataSheet */ |
| 83 | 0x35, /* VIN3 High Limit in DataSheet */ |
| 84 | 0x37, /* 5VCC High Limit in DataSheet */ |
| 85 | 0xB4, /* 5VSB High Limit in DataSheet */ |
| 86 | 0xB6 /* VBAT High Limit in DataSheet */ |
| 87 | }; |
| 88 | static const u8 W83792D_REG_IN_MIN[9] = { |
| 89 | 0x2C, /* Vcore A Low Limit in DataSheet */ |
| 90 | 0x2E, /* Vcore B Low Limit in DataSheet */ |
| 91 | 0x30, /* VIN0 Low Limit in DataSheet */ |
| 92 | 0x32, /* VIN1 Low Limit in DataSheet */ |
| 93 | 0x34, /* VIN2 Low Limit in DataSheet */ |
| 94 | 0x36, /* VIN3 Low Limit in DataSheet */ |
| 95 | 0x38, /* 5VCC Low Limit in DataSheet */ |
| 96 | 0xB5, /* 5VSB Low Limit in DataSheet */ |
| 97 | 0xB7 /* VBAT Low Limit in DataSheet */ |
| 98 | }; |
| 99 | static const u8 W83792D_REG_FAN[7] = { |
| 100 | 0x28, /* FAN 1 Count in DataSheet */ |
| 101 | 0x29, /* FAN 2 Count in DataSheet */ |
| 102 | 0x2A, /* FAN 3 Count in DataSheet */ |
| 103 | 0xB8, /* FAN 4 Count in DataSheet */ |
| 104 | 0xB9, /* FAN 5 Count in DataSheet */ |
| 105 | 0xBA, /* FAN 6 Count in DataSheet */ |
| 106 | 0xBE /* FAN 7 Count in DataSheet */ |
| 107 | }; |
| 108 | static const u8 W83792D_REG_FAN_MIN[7] = { |
| 109 | 0x3B, /* FAN 1 Count Low Limit in DataSheet */ |
| 110 | 0x3C, /* FAN 2 Count Low Limit in DataSheet */ |
| 111 | 0x3D, /* FAN 3 Count Low Limit in DataSheet */ |
| 112 | 0xBB, /* FAN 4 Count Low Limit in DataSheet */ |
| 113 | 0xBC, /* FAN 5 Count Low Limit in DataSheet */ |
| 114 | 0xBD, /* FAN 6 Count Low Limit in DataSheet */ |
| 115 | 0xBF /* FAN 7 Count Low Limit in DataSheet */ |
| 116 | }; |
| 117 | #define W83792D_REG_FAN_CFG 0x84 /* FAN Configuration in DataSheet */ |
| 118 | static const u8 W83792D_REG_FAN_DIV[4] = { |
| 119 | 0x47, /* contains FAN2 and FAN1 Divisor */ |
| 120 | 0x5B, /* contains FAN4 and FAN3 Divisor */ |
| 121 | 0x5C, /* contains FAN6 and FAN5 Divisor */ |
| 122 | 0x9E /* contains FAN7 Divisor. */ |
| 123 | }; |
| 124 | static const u8 W83792D_REG_PWM[7] = { |
| 125 | 0x81, /* FAN 1 Duty Cycle, be used to control */ |
| 126 | 0x83, /* FAN 2 Duty Cycle, be used to control */ |
| 127 | 0x94, /* FAN 3 Duty Cycle, be used to control */ |
| 128 | 0xA3, /* FAN 4 Duty Cycle, be used to control */ |
| 129 | 0xA4, /* FAN 5 Duty Cycle, be used to control */ |
| 130 | 0xA5, /* FAN 6 Duty Cycle, be used to control */ |
| 131 | 0xA6 /* FAN 7 Duty Cycle, be used to control */ |
| 132 | }; |
| 133 | #define W83792D_REG_BANK 0x4E |
| 134 | #define W83792D_REG_TEMP2_CONFIG 0xC2 |
| 135 | #define W83792D_REG_TEMP3_CONFIG 0xCA |
| 136 | |
| 137 | static const u8 W83792D_REG_TEMP1[3] = { |
| 138 | 0x27, /* TEMP 1 in DataSheet */ |
| 139 | 0x39, /* TEMP 1 Over in DataSheet */ |
| 140 | 0x3A, /* TEMP 1 Hyst in DataSheet */ |
| 141 | }; |
| 142 | |
| 143 | static const u8 W83792D_REG_TEMP_ADD[2][6] = { |
| 144 | { 0xC0, /* TEMP 2 in DataSheet */ |
| 145 | 0xC1, /* TEMP 2(0.5 deg) in DataSheet */ |
| 146 | 0xC5, /* TEMP 2 Over High part in DataSheet */ |
| 147 | 0xC6, /* TEMP 2 Over Low part in DataSheet */ |
| 148 | 0xC3, /* TEMP 2 Thyst High part in DataSheet */ |
| 149 | 0xC4 }, /* TEMP 2 Thyst Low part in DataSheet */ |
| 150 | { 0xC8, /* TEMP 3 in DataSheet */ |
| 151 | 0xC9, /* TEMP 3(0.5 deg) in DataSheet */ |
| 152 | 0xCD, /* TEMP 3 Over High part in DataSheet */ |
| 153 | 0xCE, /* TEMP 3 Over Low part in DataSheet */ |
| 154 | 0xCB, /* TEMP 3 Thyst High part in DataSheet */ |
| 155 | 0xCC } /* TEMP 3 Thyst Low part in DataSheet */ |
| 156 | }; |
| 157 | |
| 158 | static const u8 W83792D_REG_THERMAL[3] = { |
| 159 | 0x85, /* SmartFanI: Fan1 target value */ |
| 160 | 0x86, /* SmartFanI: Fan2 target value */ |
| 161 | 0x96 /* SmartFanI: Fan3 target value */ |
| 162 | }; |
| 163 | |
| 164 | static const u8 W83792D_REG_TOLERANCE[3] = { |
| 165 | 0x87, /* (bit3-0)SmartFan Fan1 tolerance */ |
| 166 | 0x87, /* (bit7-4)SmartFan Fan2 tolerance */ |
| 167 | 0x97 /* (bit3-0)SmartFan Fan3 tolerance */ |
| 168 | }; |
| 169 | |
| 170 | static const u8 W83792D_REG_POINTS[3][4] = { |
| 171 | { 0x85, /* SmartFanII: Fan1 temp point 1 */ |
| 172 | 0xE3, /* SmartFanII: Fan1 temp point 2 */ |
| 173 | 0xE4, /* SmartFanII: Fan1 temp point 3 */ |
| 174 | 0xE5 }, /* SmartFanII: Fan1 temp point 4 */ |
| 175 | { 0x86, /* SmartFanII: Fan2 temp point 1 */ |
| 176 | 0xE6, /* SmartFanII: Fan2 temp point 2 */ |
| 177 | 0xE7, /* SmartFanII: Fan2 temp point 3 */ |
| 178 | 0xE8 }, /* SmartFanII: Fan2 temp point 4 */ |
| 179 | { 0x96, /* SmartFanII: Fan3 temp point 1 */ |
| 180 | 0xE9, /* SmartFanII: Fan3 temp point 2 */ |
| 181 | 0xEA, /* SmartFanII: Fan3 temp point 3 */ |
| 182 | 0xEB } /* SmartFanII: Fan3 temp point 4 */ |
| 183 | }; |
| 184 | |
| 185 | static const u8 W83792D_REG_LEVELS[3][4] = { |
| 186 | { 0x88, /* (bit3-0) SmartFanII: Fan1 Non-Stop */ |
| 187 | 0x88, /* (bit7-4) SmartFanII: Fan1 Level 1 */ |
| 188 | 0xE0, /* (bit7-4) SmartFanII: Fan1 Level 2 */ |
| 189 | 0xE0 }, /* (bit3-0) SmartFanII: Fan1 Level 3 */ |
| 190 | { 0x89, /* (bit3-0) SmartFanII: Fan2 Non-Stop */ |
| 191 | 0x89, /* (bit7-4) SmartFanII: Fan2 Level 1 */ |
| 192 | 0xE1, /* (bit7-4) SmartFanII: Fan2 Level 2 */ |
| 193 | 0xE1 }, /* (bit3-0) SmartFanII: Fan2 Level 3 */ |
| 194 | { 0x98, /* (bit3-0) SmartFanII: Fan3 Non-Stop */ |
| 195 | 0x98, /* (bit7-4) SmartFanII: Fan3 Level 1 */ |
| 196 | 0xE2, /* (bit7-4) SmartFanII: Fan3 Level 2 */ |
| 197 | 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */ |
| 198 | }; |
| 199 | |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 200 | #define W83792D_REG_GPIO_EN 0x1A |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 201 | #define W83792D_REG_CONFIG 0x40 |
| 202 | #define W83792D_REG_VID_FANDIV 0x47 |
| 203 | #define W83792D_REG_CHIPID 0x49 |
| 204 | #define W83792D_REG_WCHIPID 0x58 |
| 205 | #define W83792D_REG_CHIPMAN 0x4F |
| 206 | #define W83792D_REG_PIN 0x4B |
| 207 | #define W83792D_REG_I2C_SUBADDR 0x4A |
| 208 | |
| 209 | #define W83792D_REG_ALARM1 0xA9 /* realtime status register1 */ |
| 210 | #define W83792D_REG_ALARM2 0xAA /* realtime status register2 */ |
| 211 | #define W83792D_REG_ALARM3 0xAB /* realtime status register3 */ |
| 212 | #define W83792D_REG_CHASSIS 0x42 /* Bit 5: Case Open status bit */ |
| 213 | #define W83792D_REG_CHASSIS_CLR 0x44 /* Bit 7: Case Open CLR_CHS/Reset bit */ |
| 214 | |
| 215 | /* control in0/in1 's limit modifiability */ |
| 216 | #define W83792D_REG_VID_IN_B 0x17 |
| 217 | |
| 218 | #define W83792D_REG_VBAT 0x5D |
| 219 | #define W83792D_REG_I2C_ADDR 0x48 |
| 220 | |
| 221 | /* Conversions. Rounding and limit checking is only done on the TO_REG |
| 222 | variants. Note that you should be a bit careful with which arguments |
| 223 | these macros are called: arguments may be evaluated more than once. |
| 224 | Fixing this is just not worth it. */ |
| 225 | #define IN_FROM_REG(nr,val) (((nr)<=1)?(val*2): \ |
| 226 | ((((nr)==6)||((nr)==7))?(val*6):(val*4))) |
| 227 | #define IN_TO_REG(nr,val) (((nr)<=1)?(val/2): \ |
| 228 | ((((nr)==6)||((nr)==7))?(val/6):(val/4))) |
| 229 | |
| 230 | static inline u8 |
| 231 | FAN_TO_REG(long rpm, int div) |
| 232 | { |
| 233 | if (rpm == 0) |
| 234 | return 255; |
| 235 | rpm = SENSORS_LIMIT(rpm, 1, 1000000); |
| 236 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); |
| 237 | } |
| 238 | |
| 239 | #define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ |
| 240 | ((val) == 255 ? 0 : \ |
| 241 | 1350000 / ((val) * (div)))) |
| 242 | |
| 243 | /* for temp1 */ |
| 244 | #define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ |
| 245 | : (val)) / 1000, 0, 0xff)) |
| 246 | #define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 247 | /* for temp2 and temp3, because they need additional resolution */ |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 248 | #define TEMP_ADD_FROM_REG(val1, val2) \ |
| 249 | ((((val1) & 0x80 ? (val1)-0x100 \ |
| 250 | : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0)) |
| 251 | #define TEMP_ADD_TO_REG_HIGH(val) \ |
| 252 | (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ |
| 253 | : (val)) / 1000, 0, 0xff)) |
| 254 | #define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00) |
| 255 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 256 | #define DIV_FROM_REG(val) (1 << (val)) |
| 257 | |
| 258 | static inline u8 |
| 259 | DIV_TO_REG(long val) |
| 260 | { |
| 261 | int i; |
| 262 | val = SENSORS_LIMIT(val, 1, 128) >> 1; |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 263 | for (i = 0; i < 7; i++) { |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 264 | if (val == 0) |
| 265 | break; |
| 266 | val >>= 1; |
| 267 | } |
| 268 | return ((u8) i); |
| 269 | } |
| 270 | |
| 271 | struct w83792d_data { |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 272 | struct device *hwmon_dev; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 273 | |
Ingo Molnar | 9a61bf6 | 2006-01-18 23:19:26 +0100 | [diff] [blame] | 274 | struct mutex update_lock; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 275 | char valid; /* !=0 if following fields are valid */ |
| 276 | unsigned long last_updated; /* In jiffies */ |
| 277 | |
| 278 | /* array of 2 pointers to subclients */ |
| 279 | struct i2c_client *lm75[2]; |
| 280 | |
| 281 | u8 in[9]; /* Register value */ |
| 282 | u8 in_max[9]; /* Register value */ |
| 283 | u8 in_min[9]; /* Register value */ |
Jean Delvare | 99d8556 | 2005-12-18 16:34:28 +0100 | [diff] [blame] | 284 | u16 low_bits; /* Additional resolution to voltage in6-0 */ |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 285 | u8 fan[7]; /* Register value */ |
| 286 | u8 fan_min[7]; /* Register value */ |
| 287 | u8 temp1[3]; /* current, over, thyst */ |
| 288 | u8 temp_add[2][6]; /* Register value */ |
| 289 | u8 fan_div[7]; /* Register encoding, shifted right */ |
| 290 | u8 pwm[7]; /* We only consider the first 3 set of pwm, |
| 291 | although 792 chip has 7 set of pwm. */ |
| 292 | u8 pwmenable[3]; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 293 | u32 alarms; /* realtime status register encoding,combined */ |
| 294 | u8 chassis; /* Chassis status */ |
| 295 | u8 chassis_clear; /* CLR_CHS, clear chassis intrusion detection */ |
| 296 | u8 thermal_cruise[3]; /* Smart FanI: Fan1,2,3 target value */ |
| 297 | u8 tolerance[3]; /* Fan1,2,3 tolerance(Smart Fan I/II) */ |
| 298 | u8 sf2_points[3][4]; /* Smart FanII: Fan1,2,3 temperature points */ |
| 299 | u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */ |
| 300 | }; |
| 301 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 302 | static int w83792d_probe(struct i2c_client *client, |
| 303 | const struct i2c_device_id *id); |
Jean Delvare | 310ec79 | 2009-12-14 21:17:23 +0100 | [diff] [blame] | 304 | static int w83792d_detect(struct i2c_client *client, |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 305 | struct i2c_board_info *info); |
| 306 | static int w83792d_remove(struct i2c_client *client); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 307 | static struct w83792d_data *w83792d_update_device(struct device *dev); |
| 308 | |
| 309 | #ifdef DEBUG |
| 310 | static void w83792d_print_debug(struct w83792d_data *data, struct device *dev); |
| 311 | #endif |
| 312 | |
| 313 | static void w83792d_init_client(struct i2c_client *client); |
| 314 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 315 | static const struct i2c_device_id w83792d_id[] = { |
Jean Delvare | 1f86df4 | 2009-12-14 21:17:26 +0100 | [diff] [blame] | 316 | { "w83792d", 0 }, |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 317 | { } |
| 318 | }; |
| 319 | MODULE_DEVICE_TABLE(i2c, w83792d_id); |
| 320 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 321 | static struct i2c_driver w83792d_driver = { |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 322 | .class = I2C_CLASS_HWMON, |
Laurent Riffard | cdaf793 | 2005-11-26 20:37:41 +0100 | [diff] [blame] | 323 | .driver = { |
Laurent Riffard | cdaf793 | 2005-11-26 20:37:41 +0100 | [diff] [blame] | 324 | .name = "w83792d", |
| 325 | }, |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 326 | .probe = w83792d_probe, |
| 327 | .remove = w83792d_remove, |
| 328 | .id_table = w83792d_id, |
| 329 | .detect = w83792d_detect, |
Jean Delvare | c3813d6 | 2009-12-14 21:17:25 +0100 | [diff] [blame] | 330 | .address_list = normal_i2c, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 331 | }; |
| 332 | |
Jean Delvare | 99d8556 | 2005-12-18 16:34:28 +0100 | [diff] [blame] | 333 | static inline long in_count_from_reg(int nr, struct w83792d_data *data) |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 334 | { |
Jean Delvare | 99d8556 | 2005-12-18 16:34:28 +0100 | [diff] [blame] | 335 | /* in7 and in8 do not have low bits, but the formula still works */ |
| 336 | return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03)); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 337 | } |
| 338 | |
Jean Delvare | 0d0ab7f | 2006-01-09 23:07:05 +0100 | [diff] [blame] | 339 | /* The SMBus locks itself. The Winbond W83792D chip has a bank register, |
| 340 | but the driver only accesses registers in bank 0, so we don't have |
| 341 | to switch banks and lock access between switches. */ |
| 342 | static inline int w83792d_read_value(struct i2c_client *client, u8 reg) |
| 343 | { |
| 344 | return i2c_smbus_read_byte_data(client, reg); |
| 345 | } |
| 346 | |
| 347 | static inline int |
| 348 | w83792d_write_value(struct i2c_client *client, u8 reg, u8 value) |
| 349 | { |
| 350 | return i2c_smbus_write_byte_data(client, reg, value); |
| 351 | } |
| 352 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 353 | /* following are the sysfs callback functions */ |
| 354 | static ssize_t show_in(struct device *dev, struct device_attribute *attr, |
| 355 | char *buf) |
| 356 | { |
| 357 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 358 | int nr = sensor_attr->index; |
| 359 | struct w83792d_data *data = w83792d_update_device(dev); |
| 360 | return sprintf(buf,"%ld\n", IN_FROM_REG(nr,(in_count_from_reg(nr, data)))); |
| 361 | } |
| 362 | |
| 363 | #define show_in_reg(reg) \ |
| 364 | static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ |
| 365 | char *buf) \ |
| 366 | { \ |
| 367 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ |
| 368 | int nr = sensor_attr->index; \ |
| 369 | struct w83792d_data *data = w83792d_update_device(dev); \ |
| 370 | return sprintf(buf,"%ld\n", (long)(IN_FROM_REG(nr, (data->reg[nr])*4))); \ |
| 371 | } |
| 372 | |
| 373 | show_in_reg(in_min); |
| 374 | show_in_reg(in_max); |
| 375 | |
| 376 | #define store_in_reg(REG, reg) \ |
| 377 | static ssize_t store_in_##reg (struct device *dev, \ |
| 378 | struct device_attribute *attr, \ |
| 379 | const char *buf, size_t count) \ |
| 380 | { \ |
| 381 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ |
| 382 | int nr = sensor_attr->index; \ |
| 383 | struct i2c_client *client = to_i2c_client(dev); \ |
| 384 | struct w83792d_data *data = i2c_get_clientdata(client); \ |
| 385 | u32 val; \ |
| 386 | \ |
| 387 | val = simple_strtoul(buf, NULL, 10); \ |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 388 | mutex_lock(&data->update_lock); \ |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 389 | data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val)/4, 0, 255); \ |
| 390 | w83792d_write_value(client, W83792D_REG_IN_##REG[nr], data->in_##reg[nr]); \ |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 391 | mutex_unlock(&data->update_lock); \ |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 392 | \ |
| 393 | return count; \ |
| 394 | } |
| 395 | store_in_reg(MIN, min); |
| 396 | store_in_reg(MAX, max); |
| 397 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 398 | #define show_fan_reg(reg) \ |
| 399 | static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ |
| 400 | char *buf) \ |
| 401 | { \ |
| 402 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ |
| 403 | int nr = sensor_attr->index - 1; \ |
| 404 | struct w83792d_data *data = w83792d_update_device(dev); \ |
| 405 | return sprintf(buf,"%d\n", \ |
| 406 | FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \ |
| 407 | } |
| 408 | |
| 409 | show_fan_reg(fan); |
| 410 | show_fan_reg(fan_min); |
| 411 | |
| 412 | static ssize_t |
| 413 | store_fan_min(struct device *dev, struct device_attribute *attr, |
| 414 | const char *buf, size_t count) |
| 415 | { |
| 416 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 417 | int nr = sensor_attr->index - 1; |
| 418 | struct i2c_client *client = to_i2c_client(dev); |
| 419 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 420 | u32 val; |
| 421 | |
| 422 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 423 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 424 | data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); |
| 425 | w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], |
| 426 | data->fan_min[nr]); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 427 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 428 | |
| 429 | return count; |
| 430 | } |
| 431 | |
| 432 | static ssize_t |
| 433 | show_fan_div(struct device *dev, struct device_attribute *attr, |
| 434 | char *buf) |
| 435 | { |
| 436 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 437 | int nr = sensor_attr->index; |
| 438 | struct w83792d_data *data = w83792d_update_device(dev); |
| 439 | return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1])); |
| 440 | } |
| 441 | |
| 442 | /* Note: we save and restore the fan minimum here, because its value is |
| 443 | determined in part by the fan divisor. This follows the principle of |
Andreas Mohr | d6e05ed | 2006-06-26 18:35:02 +0200 | [diff] [blame] | 444 | least surprise; the user doesn't expect the fan minimum to change just |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 445 | because the divisor changed. */ |
| 446 | static ssize_t |
| 447 | store_fan_div(struct device *dev, struct device_attribute *attr, |
| 448 | const char *buf, size_t count) |
| 449 | { |
| 450 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 451 | int nr = sensor_attr->index - 1; |
| 452 | struct i2c_client *client = to_i2c_client(dev); |
| 453 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 454 | unsigned long min; |
| 455 | /*u8 reg;*/ |
| 456 | u8 fan_div_reg = 0; |
| 457 | u8 tmp_fan_div; |
| 458 | |
| 459 | /* Save fan_min */ |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 460 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 461 | min = FAN_FROM_REG(data->fan_min[nr], |
| 462 | DIV_FROM_REG(data->fan_div[nr])); |
| 463 | |
| 464 | data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10)); |
| 465 | |
| 466 | fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]); |
| 467 | fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8; |
| 468 | tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70) |
| 469 | : ((data->fan_div[nr]) & 0x07); |
| 470 | w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1], |
| 471 | fan_div_reg | tmp_fan_div); |
| 472 | |
| 473 | /* Restore fan_min */ |
| 474 | data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); |
| 475 | w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 476 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 477 | |
| 478 | return count; |
| 479 | } |
| 480 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 481 | /* read/write the temperature1, includes measured value and limits */ |
| 482 | |
| 483 | static ssize_t show_temp1(struct device *dev, struct device_attribute *attr, |
| 484 | char *buf) |
| 485 | { |
| 486 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 487 | int nr = sensor_attr->index; |
| 488 | struct w83792d_data *data = w83792d_update_device(dev); |
| 489 | return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr])); |
| 490 | } |
| 491 | |
| 492 | static ssize_t store_temp1(struct device *dev, struct device_attribute *attr, |
| 493 | const char *buf, size_t count) |
| 494 | { |
| 495 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 496 | int nr = sensor_attr->index; |
| 497 | struct i2c_client *client = to_i2c_client(dev); |
| 498 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 499 | s32 val; |
| 500 | |
| 501 | val = simple_strtol(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 502 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 503 | data->temp1[nr] = TEMP1_TO_REG(val); |
| 504 | w83792d_write_value(client, W83792D_REG_TEMP1[nr], |
| 505 | data->temp1[nr]); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 506 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 507 | |
| 508 | return count; |
| 509 | } |
| 510 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 511 | /* read/write the temperature2-3, includes measured value and limits */ |
| 512 | |
| 513 | static ssize_t show_temp23(struct device *dev, struct device_attribute *attr, |
| 514 | char *buf) |
| 515 | { |
| 516 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 517 | int nr = sensor_attr->nr; |
| 518 | int index = sensor_attr->index; |
| 519 | struct w83792d_data *data = w83792d_update_device(dev); |
| 520 | return sprintf(buf,"%ld\n", |
| 521 | (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index], |
| 522 | data->temp_add[nr][index+1])); |
| 523 | } |
| 524 | |
| 525 | static ssize_t store_temp23(struct device *dev, struct device_attribute *attr, |
| 526 | const char *buf, size_t count) |
| 527 | { |
| 528 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 529 | int nr = sensor_attr->nr; |
| 530 | int index = sensor_attr->index; |
| 531 | struct i2c_client *client = to_i2c_client(dev); |
| 532 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 533 | s32 val; |
| 534 | |
| 535 | val = simple_strtol(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 536 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 537 | data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val); |
| 538 | data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val); |
| 539 | w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index], |
| 540 | data->temp_add[nr][index]); |
| 541 | w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1], |
| 542 | data->temp_add[nr][index+1]); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 543 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 544 | |
| 545 | return count; |
| 546 | } |
| 547 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 548 | /* get reatime status of all sensors items: voltage, temp, fan */ |
| 549 | static ssize_t |
| 550 | show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) |
| 551 | { |
| 552 | struct w83792d_data *data = w83792d_update_device(dev); |
| 553 | return sprintf(buf, "%d\n", data->alarms); |
| 554 | } |
| 555 | |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 556 | static ssize_t show_alarm(struct device *dev, |
| 557 | struct device_attribute *attr, char *buf) |
| 558 | { |
| 559 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 560 | int nr = sensor_attr->index; |
| 561 | struct w83792d_data *data = w83792d_update_device(dev); |
| 562 | return sprintf(buf, "%d\n", (data->alarms >> nr) & 1); |
| 563 | } |
| 564 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 565 | static ssize_t |
| 566 | show_pwm(struct device *dev, struct device_attribute *attr, |
| 567 | char *buf) |
| 568 | { |
| 569 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 570 | int nr = sensor_attr->index; |
| 571 | struct w83792d_data *data = w83792d_update_device(dev); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 572 | return sprintf(buf, "%d\n", (data->pwm[nr] & 0x0f) << 4); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 573 | } |
| 574 | |
| 575 | static ssize_t |
| 576 | show_pwmenable(struct device *dev, struct device_attribute *attr, |
| 577 | char *buf) |
| 578 | { |
| 579 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 580 | int nr = sensor_attr->index - 1; |
| 581 | struct w83792d_data *data = w83792d_update_device(dev); |
| 582 | long pwm_enable_tmp = 1; |
| 583 | |
| 584 | switch (data->pwmenable[nr]) { |
| 585 | case 0: |
| 586 | pwm_enable_tmp = 1; /* manual mode */ |
| 587 | break; |
| 588 | case 1: |
| 589 | pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */ |
| 590 | break; |
| 591 | case 2: |
| 592 | pwm_enable_tmp = 2; /* Smart Fan II */ |
| 593 | break; |
| 594 | } |
| 595 | |
| 596 | return sprintf(buf, "%ld\n", pwm_enable_tmp); |
| 597 | } |
| 598 | |
| 599 | static ssize_t |
| 600 | store_pwm(struct device *dev, struct device_attribute *attr, |
| 601 | const char *buf, size_t count) |
| 602 | { |
| 603 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 604 | int nr = sensor_attr->index; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 605 | struct i2c_client *client = to_i2c_client(dev); |
| 606 | struct w83792d_data *data = i2c_get_clientdata(client); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 607 | u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255) >> 4; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 608 | |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 609 | mutex_lock(&data->update_lock); |
| 610 | val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0; |
| 611 | data->pwm[nr] = val; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 612 | w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 613 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 614 | |
| 615 | return count; |
| 616 | } |
| 617 | |
| 618 | static ssize_t |
| 619 | store_pwmenable(struct device *dev, struct device_attribute *attr, |
| 620 | const char *buf, size_t count) |
| 621 | { |
| 622 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 623 | int nr = sensor_attr->index - 1; |
| 624 | struct i2c_client *client = to_i2c_client(dev); |
| 625 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 626 | u32 val; |
| 627 | u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp; |
| 628 | |
| 629 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 630 | if (val < 1 || val > 3) |
| 631 | return -EINVAL; |
| 632 | |
| 633 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 634 | switch (val) { |
| 635 | case 1: |
| 636 | data->pwmenable[nr] = 0; /* manual mode */ |
| 637 | break; |
| 638 | case 2: |
| 639 | data->pwmenable[nr] = 2; /* Smart Fan II */ |
| 640 | break; |
| 641 | case 3: |
| 642 | data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */ |
| 643 | break; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 644 | } |
| 645 | cfg1_tmp = data->pwmenable[0]; |
| 646 | cfg2_tmp = (data->pwmenable[1]) << 2; |
| 647 | cfg3_tmp = (data->pwmenable[2]) << 4; |
| 648 | cfg4_tmp = w83792d_read_value(client,W83792D_REG_FAN_CFG) & 0xc0; |
| 649 | fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp; |
| 650 | w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 651 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 652 | |
| 653 | return count; |
| 654 | } |
| 655 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 656 | static ssize_t |
| 657 | show_pwm_mode(struct device *dev, struct device_attribute *attr, |
| 658 | char *buf) |
| 659 | { |
| 660 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 661 | int nr = sensor_attr->index; |
| 662 | struct w83792d_data *data = w83792d_update_device(dev); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 663 | return sprintf(buf, "%d\n", data->pwm[nr] >> 7); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 664 | } |
| 665 | |
| 666 | static ssize_t |
| 667 | store_pwm_mode(struct device *dev, struct device_attribute *attr, |
| 668 | const char *buf, size_t count) |
| 669 | { |
| 670 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 671 | int nr = sensor_attr->index; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 672 | struct i2c_client *client = to_i2c_client(dev); |
| 673 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 674 | u32 val; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 675 | |
| 676 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 677 | if (val != 0 && val != 1) |
| 678 | return -EINVAL; |
| 679 | |
| 680 | mutex_lock(&data->update_lock); |
| 681 | data->pwm[nr] = w83792d_read_value(client, W83792D_REG_PWM[nr]); |
| 682 | if (val) { /* PWM mode */ |
| 683 | data->pwm[nr] |= 0x80; |
| 684 | } else { /* DC mode */ |
| 685 | data->pwm[nr] &= 0x7f; |
| 686 | } |
| 687 | w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]); |
| 688 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 689 | |
| 690 | return count; |
| 691 | } |
| 692 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 693 | static ssize_t |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 694 | show_chassis(struct device *dev, struct device_attribute *attr, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 695 | char *buf) |
| 696 | { |
| 697 | struct w83792d_data *data = w83792d_update_device(dev); |
| 698 | return sprintf(buf, "%d\n", data->chassis); |
| 699 | } |
| 700 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 701 | static ssize_t |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 702 | show_regs_chassis(struct device *dev, struct device_attribute *attr, |
| 703 | char *buf) |
| 704 | { |
| 705 | dev_warn(dev, |
| 706 | "Attribute %s is deprecated, use intrusion0_alarm instead\n", |
| 707 | "chassis"); |
| 708 | return show_chassis(dev, attr, buf); |
| 709 | } |
| 710 | |
| 711 | static ssize_t |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 712 | show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf) |
| 713 | { |
| 714 | struct w83792d_data *data = w83792d_update_device(dev); |
| 715 | return sprintf(buf, "%d\n", data->chassis_clear); |
| 716 | } |
| 717 | |
| 718 | static ssize_t |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 719 | store_chassis_clear_legacy(struct device *dev, struct device_attribute *attr, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 720 | const char *buf, size_t count) |
| 721 | { |
| 722 | struct i2c_client *client = to_i2c_client(dev); |
| 723 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 724 | u32 val; |
| 725 | u8 temp1 = 0, temp2 = 0; |
| 726 | |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 727 | dev_warn(dev, |
| 728 | "Attribute %s is deprecated, use intrusion0_alarm instead\n", |
| 729 | "chassis_clear"); |
| 730 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 731 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 732 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 733 | data->chassis_clear = SENSORS_LIMIT(val, 0 ,1); |
| 734 | temp1 = ((data->chassis_clear) << 7) & 0x80; |
| 735 | temp2 = w83792d_read_value(client, |
| 736 | W83792D_REG_CHASSIS_CLR) & 0x7f; |
| 737 | w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, temp1 | temp2); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 738 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 739 | |
| 740 | return count; |
| 741 | } |
| 742 | |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 743 | static ssize_t |
| 744 | store_chassis_clear(struct device *dev, struct device_attribute *attr, |
| 745 | const char *buf, size_t count) |
| 746 | { |
| 747 | struct i2c_client *client = to_i2c_client(dev); |
| 748 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 749 | unsigned long val; |
| 750 | u8 reg; |
| 751 | |
Frans Meulenbroeks | 179c4fd | 2012-01-04 20:58:52 +0100 | [diff] [blame] | 752 | if (kstrtoul(buf, 10, &val) || val != 0) |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 753 | return -EINVAL; |
| 754 | |
| 755 | mutex_lock(&data->update_lock); |
| 756 | reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR); |
| 757 | w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80); |
| 758 | data->valid = 0; /* Force cache refresh */ |
| 759 | mutex_unlock(&data->update_lock); |
| 760 | |
| 761 | return count; |
| 762 | } |
| 763 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 764 | /* For Smart Fan I / Thermal Cruise */ |
| 765 | static ssize_t |
| 766 | show_thermal_cruise(struct device *dev, struct device_attribute *attr, |
| 767 | char *buf) |
| 768 | { |
| 769 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 770 | int nr = sensor_attr->index; |
| 771 | struct w83792d_data *data = w83792d_update_device(dev); |
| 772 | return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]); |
| 773 | } |
| 774 | |
| 775 | static ssize_t |
| 776 | store_thermal_cruise(struct device *dev, struct device_attribute *attr, |
| 777 | const char *buf, size_t count) |
| 778 | { |
| 779 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 780 | int nr = sensor_attr->index - 1; |
| 781 | struct i2c_client *client = to_i2c_client(dev); |
| 782 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 783 | u32 val; |
| 784 | u8 target_tmp=0, target_mask=0; |
| 785 | |
| 786 | val = simple_strtoul(buf, NULL, 10); |
| 787 | target_tmp = val; |
| 788 | target_tmp = target_tmp & 0x7f; |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 789 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 790 | target_mask = w83792d_read_value(client, W83792D_REG_THERMAL[nr]) & 0x80; |
| 791 | data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255); |
| 792 | w83792d_write_value(client, W83792D_REG_THERMAL[nr], |
| 793 | (data->thermal_cruise[nr]) | target_mask); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 794 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 795 | |
| 796 | return count; |
| 797 | } |
| 798 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 799 | /* For Smart Fan I/Thermal Cruise and Smart Fan II */ |
| 800 | static ssize_t |
| 801 | show_tolerance(struct device *dev, struct device_attribute *attr, |
| 802 | char *buf) |
| 803 | { |
| 804 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 805 | int nr = sensor_attr->index; |
| 806 | struct w83792d_data *data = w83792d_update_device(dev); |
| 807 | return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]); |
| 808 | } |
| 809 | |
| 810 | static ssize_t |
| 811 | store_tolerance(struct device *dev, struct device_attribute *attr, |
| 812 | const char *buf, size_t count) |
| 813 | { |
| 814 | struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| 815 | int nr = sensor_attr->index - 1; |
| 816 | struct i2c_client *client = to_i2c_client(dev); |
| 817 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 818 | u32 val; |
| 819 | u8 tol_tmp, tol_mask; |
| 820 | |
| 821 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 822 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 823 | tol_mask = w83792d_read_value(client, |
| 824 | W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0); |
| 825 | tol_tmp = SENSORS_LIMIT(val, 0, 15); |
| 826 | tol_tmp &= 0x0f; |
| 827 | data->tolerance[nr] = tol_tmp; |
| 828 | if (nr == 1) { |
| 829 | tol_tmp <<= 4; |
| 830 | } |
| 831 | w83792d_write_value(client, W83792D_REG_TOLERANCE[nr], |
| 832 | tol_mask | tol_tmp); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 833 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 834 | |
| 835 | return count; |
| 836 | } |
| 837 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 838 | /* For Smart Fan II */ |
| 839 | static ssize_t |
| 840 | show_sf2_point(struct device *dev, struct device_attribute *attr, |
| 841 | char *buf) |
| 842 | { |
| 843 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 844 | int nr = sensor_attr->nr; |
| 845 | int index = sensor_attr->index; |
| 846 | struct w83792d_data *data = w83792d_update_device(dev); |
| 847 | return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]); |
| 848 | } |
| 849 | |
| 850 | static ssize_t |
| 851 | store_sf2_point(struct device *dev, struct device_attribute *attr, |
| 852 | const char *buf, size_t count) |
| 853 | { |
| 854 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 855 | int nr = sensor_attr->nr - 1; |
| 856 | int index = sensor_attr->index - 1; |
| 857 | struct i2c_client *client = to_i2c_client(dev); |
| 858 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 859 | u32 val; |
| 860 | u8 mask_tmp = 0; |
| 861 | |
| 862 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 863 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 864 | data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127); |
| 865 | mask_tmp = w83792d_read_value(client, |
| 866 | W83792D_REG_POINTS[index][nr]) & 0x80; |
| 867 | w83792d_write_value(client, W83792D_REG_POINTS[index][nr], |
| 868 | mask_tmp|data->sf2_points[index][nr]); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 869 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 870 | |
| 871 | return count; |
| 872 | } |
| 873 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 874 | static ssize_t |
| 875 | show_sf2_level(struct device *dev, struct device_attribute *attr, |
| 876 | char *buf) |
| 877 | { |
| 878 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 879 | int nr = sensor_attr->nr; |
| 880 | int index = sensor_attr->index; |
| 881 | struct w83792d_data *data = w83792d_update_device(dev); |
| 882 | return sprintf(buf, "%d\n", |
| 883 | (((data->sf2_levels[index-1][nr]) * 100) / 15)); |
| 884 | } |
| 885 | |
| 886 | static ssize_t |
| 887 | store_sf2_level(struct device *dev, struct device_attribute *attr, |
| 888 | const char *buf, size_t count) |
| 889 | { |
| 890 | struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); |
| 891 | int nr = sensor_attr->nr; |
| 892 | int index = sensor_attr->index - 1; |
| 893 | struct i2c_client *client = to_i2c_client(dev); |
| 894 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 895 | u32 val; |
| 896 | u8 mask_tmp=0, level_tmp=0; |
| 897 | |
| 898 | val = simple_strtoul(buf, NULL, 10); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 899 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 900 | data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15); |
| 901 | mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr]) |
| 902 | & ((nr==3) ? 0xf0 : 0x0f); |
| 903 | if (nr==3) { |
| 904 | level_tmp = data->sf2_levels[index][nr]; |
| 905 | } else { |
| 906 | level_tmp = data->sf2_levels[index][nr] << 4; |
| 907 | } |
| 908 | w83792d_write_value(client, W83792D_REG_LEVELS[index][nr], level_tmp | mask_tmp); |
Yuan Mu | bed7308 | 2006-06-04 20:18:45 +0200 | [diff] [blame] | 909 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 910 | |
| 911 | return count; |
| 912 | } |
| 913 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 914 | |
| 915 | static int |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 916 | w83792d_detect_subclients(struct i2c_client *new_client) |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 917 | { |
| 918 | int i, id, err; |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 919 | int address = new_client->addr; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 920 | u8 val; |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 921 | struct i2c_adapter *adapter = new_client->adapter; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 922 | struct w83792d_data *data = i2c_get_clientdata(new_client); |
| 923 | |
| 924 | id = i2c_adapter_id(adapter); |
| 925 | if (force_subclients[0] == id && force_subclients[1] == address) { |
| 926 | for (i = 2; i <= 3; i++) { |
| 927 | if (force_subclients[i] < 0x48 || |
| 928 | force_subclients[i] > 0x4f) { |
| 929 | dev_err(&new_client->dev, "invalid subclient " |
| 930 | "address %d; must be 0x48-0x4f\n", |
| 931 | force_subclients[i]); |
| 932 | err = -ENODEV; |
| 933 | goto ERROR_SC_0; |
| 934 | } |
| 935 | } |
| 936 | w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR, |
| 937 | (force_subclients[2] & 0x07) | |
| 938 | ((force_subclients[3] & 0x07) << 4)); |
| 939 | } |
| 940 | |
| 941 | val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); |
| 942 | if (!(val & 0x08)) { |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 943 | data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 944 | } |
| 945 | if (!(val & 0x80)) { |
| 946 | if ((data->lm75[0] != NULL) && |
| 947 | ((val & 0x7) == ((val >> 4) & 0x7))) { |
| 948 | dev_err(&new_client->dev, "duplicate addresses 0x%x, " |
| 949 | "use force_subclient\n", data->lm75[0]->addr); |
| 950 | err = -ENODEV; |
| 951 | goto ERROR_SC_1; |
| 952 | } |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 953 | data->lm75[1] = i2c_new_dummy(adapter, |
| 954 | 0x48 + ((val >> 4) & 0x7)); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 955 | } |
| 956 | |
| 957 | return 0; |
| 958 | |
| 959 | /* Undo inits in case of errors */ |
| 960 | |
| 961 | ERROR_SC_1: |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 962 | if (data->lm75[0] != NULL) |
| 963 | i2c_unregister_device(data->lm75[0]); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 964 | ERROR_SC_0: |
| 965 | return err; |
| 966 | } |
| 967 | |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 968 | static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); |
| 969 | static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); |
| 970 | static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); |
| 971 | static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); |
| 972 | static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); |
| 973 | static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5); |
| 974 | static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6); |
| 975 | static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7); |
| 976 | static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8); |
| 977 | static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, |
| 978 | show_in_min, store_in_min, 0); |
| 979 | static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, |
| 980 | show_in_min, store_in_min, 1); |
| 981 | static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, |
| 982 | show_in_min, store_in_min, 2); |
| 983 | static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, |
| 984 | show_in_min, store_in_min, 3); |
| 985 | static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, |
| 986 | show_in_min, store_in_min, 4); |
| 987 | static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, |
| 988 | show_in_min, store_in_min, 5); |
| 989 | static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, |
| 990 | show_in_min, store_in_min, 6); |
| 991 | static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, |
| 992 | show_in_min, store_in_min, 7); |
| 993 | static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, |
| 994 | show_in_min, store_in_min, 8); |
| 995 | static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, |
| 996 | show_in_max, store_in_max, 0); |
| 997 | static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, |
| 998 | show_in_max, store_in_max, 1); |
| 999 | static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, |
| 1000 | show_in_max, store_in_max, 2); |
| 1001 | static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, |
| 1002 | show_in_max, store_in_max, 3); |
| 1003 | static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, |
| 1004 | show_in_max, store_in_max, 4); |
| 1005 | static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, |
| 1006 | show_in_max, store_in_max, 5); |
| 1007 | static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, |
| 1008 | show_in_max, store_in_max, 6); |
| 1009 | static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, |
| 1010 | show_in_max, store_in_max, 7); |
| 1011 | static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, |
| 1012 | show_in_max, store_in_max, 8); |
| 1013 | static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0); |
| 1014 | static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0); |
| 1015 | static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0); |
| 1016 | static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, |
| 1017 | show_temp1, store_temp1, 0, 1); |
| 1018 | static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, |
| 1019 | store_temp23, 0, 2); |
| 1020 | static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, |
| 1021 | store_temp23, 1, 2); |
| 1022 | static SENSOR_DEVICE_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, |
| 1023 | show_temp1, store_temp1, 0, 2); |
| 1024 | static SENSOR_DEVICE_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, |
| 1025 | show_temp23, store_temp23, 0, 4); |
| 1026 | static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, |
| 1027 | show_temp23, store_temp23, 1, 4); |
| 1028 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1029 | static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); |
| 1030 | static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); |
| 1031 | static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 2); |
| 1032 | static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 3); |
| 1033 | static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 4); |
| 1034 | static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5); |
| 1035 | static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6); |
| 1036 | static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 7); |
| 1037 | static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 8); |
| 1038 | static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 9); |
| 1039 | static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 10); |
| 1040 | static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 11); |
| 1041 | static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 12); |
| 1042 | static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 15); |
| 1043 | static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19); |
| 1044 | static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20); |
| 1045 | static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21); |
| 1046 | static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22); |
| 1047 | static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23); |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1048 | static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL); |
| 1049 | static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR, |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 1050 | show_chassis_clear, store_chassis_clear_legacy); |
| 1051 | static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, |
| 1052 | show_chassis, store_chassis_clear); |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1053 | static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0); |
| 1054 | static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1); |
| 1055 | static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2); |
| 1056 | static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, |
| 1057 | show_pwmenable, store_pwmenable, 1); |
| 1058 | static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, |
| 1059 | show_pwmenable, store_pwmenable, 2); |
| 1060 | static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, |
| 1061 | show_pwmenable, store_pwmenable, 3); |
| 1062 | static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, |
| 1063 | show_pwm_mode, store_pwm_mode, 0); |
| 1064 | static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, |
| 1065 | show_pwm_mode, store_pwm_mode, 1); |
| 1066 | static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, |
| 1067 | show_pwm_mode, store_pwm_mode, 2); |
| 1068 | static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO, |
| 1069 | show_tolerance, store_tolerance, 1); |
| 1070 | static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO, |
| 1071 | show_tolerance, store_tolerance, 2); |
| 1072 | static SENSOR_DEVICE_ATTR(tolerance3, S_IWUSR | S_IRUGO, |
| 1073 | show_tolerance, store_tolerance, 3); |
| 1074 | static SENSOR_DEVICE_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO, |
| 1075 | show_thermal_cruise, store_thermal_cruise, 1); |
| 1076 | static SENSOR_DEVICE_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO, |
| 1077 | show_thermal_cruise, store_thermal_cruise, 2); |
| 1078 | static SENSOR_DEVICE_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO, |
| 1079 | show_thermal_cruise, store_thermal_cruise, 3); |
| 1080 | static SENSOR_DEVICE_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR, |
| 1081 | show_sf2_point, store_sf2_point, 1, 1); |
| 1082 | static SENSOR_DEVICE_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR, |
| 1083 | show_sf2_point, store_sf2_point, 2, 1); |
| 1084 | static SENSOR_DEVICE_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR, |
| 1085 | show_sf2_point, store_sf2_point, 3, 1); |
| 1086 | static SENSOR_DEVICE_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR, |
| 1087 | show_sf2_point, store_sf2_point, 4, 1); |
| 1088 | static SENSOR_DEVICE_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR, |
| 1089 | show_sf2_point, store_sf2_point, 1, 2); |
| 1090 | static SENSOR_DEVICE_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR, |
| 1091 | show_sf2_point, store_sf2_point, 2, 2); |
| 1092 | static SENSOR_DEVICE_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR, |
| 1093 | show_sf2_point, store_sf2_point, 3, 2); |
| 1094 | static SENSOR_DEVICE_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR, |
| 1095 | show_sf2_point, store_sf2_point, 4, 2); |
| 1096 | static SENSOR_DEVICE_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR, |
| 1097 | show_sf2_point, store_sf2_point, 1, 3); |
| 1098 | static SENSOR_DEVICE_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR, |
| 1099 | show_sf2_point, store_sf2_point, 2, 3); |
| 1100 | static SENSOR_DEVICE_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR, |
| 1101 | show_sf2_point, store_sf2_point, 3, 3); |
| 1102 | static SENSOR_DEVICE_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR, |
| 1103 | show_sf2_point, store_sf2_point, 4, 3); |
| 1104 | static SENSOR_DEVICE_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR, |
| 1105 | show_sf2_level, store_sf2_level, 1, 1); |
| 1106 | static SENSOR_DEVICE_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR, |
| 1107 | show_sf2_level, store_sf2_level, 2, 1); |
| 1108 | static SENSOR_DEVICE_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR, |
| 1109 | show_sf2_level, store_sf2_level, 3, 1); |
| 1110 | static SENSOR_DEVICE_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR, |
| 1111 | show_sf2_level, store_sf2_level, 1, 2); |
| 1112 | static SENSOR_DEVICE_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR, |
| 1113 | show_sf2_level, store_sf2_level, 2, 2); |
| 1114 | static SENSOR_DEVICE_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR, |
| 1115 | show_sf2_level, store_sf2_level, 3, 2); |
| 1116 | static SENSOR_DEVICE_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR, |
| 1117 | show_sf2_level, store_sf2_level, 1, 3); |
| 1118 | static SENSOR_DEVICE_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR, |
| 1119 | show_sf2_level, store_sf2_level, 2, 3); |
| 1120 | static SENSOR_DEVICE_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR, |
| 1121 | show_sf2_level, store_sf2_level, 3, 3); |
| 1122 | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1); |
| 1123 | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2); |
| 1124 | static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3); |
| 1125 | static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4); |
| 1126 | static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5); |
| 1127 | static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6); |
| 1128 | static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7); |
| 1129 | static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, |
| 1130 | show_fan_min, store_fan_min, 1); |
| 1131 | static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, |
| 1132 | show_fan_min, store_fan_min, 2); |
| 1133 | static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, |
| 1134 | show_fan_min, store_fan_min, 3); |
| 1135 | static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, |
| 1136 | show_fan_min, store_fan_min, 4); |
| 1137 | static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, |
| 1138 | show_fan_min, store_fan_min, 5); |
| 1139 | static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, |
| 1140 | show_fan_min, store_fan_min, 6); |
| 1141 | static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, |
| 1142 | show_fan_min, store_fan_min, 7); |
| 1143 | static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, |
| 1144 | show_fan_div, store_fan_div, 1); |
| 1145 | static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, |
| 1146 | show_fan_div, store_fan_div, 2); |
| 1147 | static SENSOR_DEVICE_ATTR(fan3_div, S_IWUSR | S_IRUGO, |
| 1148 | show_fan_div, store_fan_div, 3); |
| 1149 | static SENSOR_DEVICE_ATTR(fan4_div, S_IWUSR | S_IRUGO, |
| 1150 | show_fan_div, store_fan_div, 4); |
| 1151 | static SENSOR_DEVICE_ATTR(fan5_div, S_IWUSR | S_IRUGO, |
| 1152 | show_fan_div, store_fan_div, 5); |
| 1153 | static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO, |
| 1154 | show_fan_div, store_fan_div, 6); |
| 1155 | static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO, |
| 1156 | show_fan_div, store_fan_div, 7); |
| 1157 | |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1158 | static struct attribute *w83792d_attributes_fan[4][5] = { |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1159 | { |
| 1160 | &sensor_dev_attr_fan4_input.dev_attr.attr, |
| 1161 | &sensor_dev_attr_fan4_min.dev_attr.attr, |
| 1162 | &sensor_dev_attr_fan4_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1163 | &sensor_dev_attr_fan4_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1164 | NULL |
| 1165 | }, { |
| 1166 | &sensor_dev_attr_fan5_input.dev_attr.attr, |
| 1167 | &sensor_dev_attr_fan5_min.dev_attr.attr, |
| 1168 | &sensor_dev_attr_fan5_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1169 | &sensor_dev_attr_fan5_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1170 | NULL |
| 1171 | }, { |
| 1172 | &sensor_dev_attr_fan6_input.dev_attr.attr, |
| 1173 | &sensor_dev_attr_fan6_min.dev_attr.attr, |
| 1174 | &sensor_dev_attr_fan6_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1175 | &sensor_dev_attr_fan6_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1176 | NULL |
| 1177 | }, { |
| 1178 | &sensor_dev_attr_fan7_input.dev_attr.attr, |
| 1179 | &sensor_dev_attr_fan7_min.dev_attr.attr, |
| 1180 | &sensor_dev_attr_fan7_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1181 | &sensor_dev_attr_fan7_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1182 | NULL |
| 1183 | } |
| 1184 | }; |
| 1185 | |
| 1186 | static const struct attribute_group w83792d_group_fan[4] = { |
| 1187 | { .attrs = w83792d_attributes_fan[0] }, |
| 1188 | { .attrs = w83792d_attributes_fan[1] }, |
| 1189 | { .attrs = w83792d_attributes_fan[2] }, |
| 1190 | { .attrs = w83792d_attributes_fan[3] }, |
| 1191 | }; |
| 1192 | |
| 1193 | static struct attribute *w83792d_attributes[] = { |
| 1194 | &sensor_dev_attr_in0_input.dev_attr.attr, |
| 1195 | &sensor_dev_attr_in0_max.dev_attr.attr, |
| 1196 | &sensor_dev_attr_in0_min.dev_attr.attr, |
| 1197 | &sensor_dev_attr_in1_input.dev_attr.attr, |
| 1198 | &sensor_dev_attr_in1_max.dev_attr.attr, |
| 1199 | &sensor_dev_attr_in1_min.dev_attr.attr, |
| 1200 | &sensor_dev_attr_in2_input.dev_attr.attr, |
| 1201 | &sensor_dev_attr_in2_max.dev_attr.attr, |
| 1202 | &sensor_dev_attr_in2_min.dev_attr.attr, |
| 1203 | &sensor_dev_attr_in3_input.dev_attr.attr, |
| 1204 | &sensor_dev_attr_in3_max.dev_attr.attr, |
| 1205 | &sensor_dev_attr_in3_min.dev_attr.attr, |
| 1206 | &sensor_dev_attr_in4_input.dev_attr.attr, |
| 1207 | &sensor_dev_attr_in4_max.dev_attr.attr, |
| 1208 | &sensor_dev_attr_in4_min.dev_attr.attr, |
| 1209 | &sensor_dev_attr_in5_input.dev_attr.attr, |
| 1210 | &sensor_dev_attr_in5_max.dev_attr.attr, |
| 1211 | &sensor_dev_attr_in5_min.dev_attr.attr, |
| 1212 | &sensor_dev_attr_in6_input.dev_attr.attr, |
| 1213 | &sensor_dev_attr_in6_max.dev_attr.attr, |
| 1214 | &sensor_dev_attr_in6_min.dev_attr.attr, |
| 1215 | &sensor_dev_attr_in7_input.dev_attr.attr, |
| 1216 | &sensor_dev_attr_in7_max.dev_attr.attr, |
| 1217 | &sensor_dev_attr_in7_min.dev_attr.attr, |
| 1218 | &sensor_dev_attr_in8_input.dev_attr.attr, |
| 1219 | &sensor_dev_attr_in8_max.dev_attr.attr, |
| 1220 | &sensor_dev_attr_in8_min.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1221 | &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| 1222 | &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| 1223 | &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| 1224 | &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| 1225 | &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| 1226 | &sensor_dev_attr_in5_alarm.dev_attr.attr, |
| 1227 | &sensor_dev_attr_in6_alarm.dev_attr.attr, |
| 1228 | &sensor_dev_attr_in7_alarm.dev_attr.attr, |
| 1229 | &sensor_dev_attr_in8_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1230 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
| 1231 | &sensor_dev_attr_temp1_max.dev_attr.attr, |
| 1232 | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| 1233 | &sensor_dev_attr_temp2_input.dev_attr.attr, |
| 1234 | &sensor_dev_attr_temp2_max.dev_attr.attr, |
| 1235 | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| 1236 | &sensor_dev_attr_temp3_input.dev_attr.attr, |
| 1237 | &sensor_dev_attr_temp3_max.dev_attr.attr, |
| 1238 | &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1239 | &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| 1240 | &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| 1241 | &sensor_dev_attr_temp3_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1242 | &sensor_dev_attr_pwm1.dev_attr.attr, |
| 1243 | &sensor_dev_attr_pwm1_mode.dev_attr.attr, |
| 1244 | &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| 1245 | &sensor_dev_attr_pwm2.dev_attr.attr, |
| 1246 | &sensor_dev_attr_pwm2_mode.dev_attr.attr, |
| 1247 | &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| 1248 | &sensor_dev_attr_pwm3.dev_attr.attr, |
| 1249 | &sensor_dev_attr_pwm3_mode.dev_attr.attr, |
| 1250 | &sensor_dev_attr_pwm3_enable.dev_attr.attr, |
| 1251 | &dev_attr_alarms.attr, |
| 1252 | &dev_attr_chassis.attr, |
| 1253 | &dev_attr_chassis_clear.attr, |
Jean Delvare | c32301b | 2011-01-12 21:55:09 +0100 | [diff] [blame] | 1254 | &dev_attr_intrusion0_alarm.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1255 | &sensor_dev_attr_tolerance1.dev_attr.attr, |
| 1256 | &sensor_dev_attr_thermal_cruise1.dev_attr.attr, |
| 1257 | &sensor_dev_attr_tolerance2.dev_attr.attr, |
| 1258 | &sensor_dev_attr_thermal_cruise2.dev_attr.attr, |
| 1259 | &sensor_dev_attr_tolerance3.dev_attr.attr, |
| 1260 | &sensor_dev_attr_thermal_cruise3.dev_attr.attr, |
| 1261 | &sensor_dev_attr_sf2_point1_fan1.dev_attr.attr, |
| 1262 | &sensor_dev_attr_sf2_point2_fan1.dev_attr.attr, |
| 1263 | &sensor_dev_attr_sf2_point3_fan1.dev_attr.attr, |
| 1264 | &sensor_dev_attr_sf2_point4_fan1.dev_attr.attr, |
| 1265 | &sensor_dev_attr_sf2_point1_fan2.dev_attr.attr, |
| 1266 | &sensor_dev_attr_sf2_point2_fan2.dev_attr.attr, |
| 1267 | &sensor_dev_attr_sf2_point3_fan2.dev_attr.attr, |
| 1268 | &sensor_dev_attr_sf2_point4_fan2.dev_attr.attr, |
| 1269 | &sensor_dev_attr_sf2_point1_fan3.dev_attr.attr, |
| 1270 | &sensor_dev_attr_sf2_point2_fan3.dev_attr.attr, |
| 1271 | &sensor_dev_attr_sf2_point3_fan3.dev_attr.attr, |
| 1272 | &sensor_dev_attr_sf2_point4_fan3.dev_attr.attr, |
| 1273 | &sensor_dev_attr_sf2_level1_fan1.dev_attr.attr, |
| 1274 | &sensor_dev_attr_sf2_level2_fan1.dev_attr.attr, |
| 1275 | &sensor_dev_attr_sf2_level3_fan1.dev_attr.attr, |
| 1276 | &sensor_dev_attr_sf2_level1_fan2.dev_attr.attr, |
| 1277 | &sensor_dev_attr_sf2_level2_fan2.dev_attr.attr, |
| 1278 | &sensor_dev_attr_sf2_level3_fan2.dev_attr.attr, |
| 1279 | &sensor_dev_attr_sf2_level1_fan3.dev_attr.attr, |
| 1280 | &sensor_dev_attr_sf2_level2_fan3.dev_attr.attr, |
| 1281 | &sensor_dev_attr_sf2_level3_fan3.dev_attr.attr, |
| 1282 | &sensor_dev_attr_fan1_input.dev_attr.attr, |
| 1283 | &sensor_dev_attr_fan1_min.dev_attr.attr, |
| 1284 | &sensor_dev_attr_fan1_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1285 | &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1286 | &sensor_dev_attr_fan2_input.dev_attr.attr, |
| 1287 | &sensor_dev_attr_fan2_min.dev_attr.attr, |
| 1288 | &sensor_dev_attr_fan2_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1289 | &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1290 | &sensor_dev_attr_fan3_input.dev_attr.attr, |
| 1291 | &sensor_dev_attr_fan3_min.dev_attr.attr, |
| 1292 | &sensor_dev_attr_fan3_div.dev_attr.attr, |
Gong Jun | 43e61a2 | 2007-07-13 18:45:54 +0200 | [diff] [blame] | 1293 | &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1294 | NULL |
| 1295 | }; |
| 1296 | |
| 1297 | static const struct attribute_group w83792d_group = { |
| 1298 | .attrs = w83792d_attributes, |
| 1299 | }; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1300 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1301 | /* Return 0 if detection is successful, -ENODEV otherwise */ |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1302 | static int |
Jean Delvare | 310ec79 | 2009-12-14 21:17:23 +0100 | [diff] [blame] | 1303 | w83792d_detect(struct i2c_client *client, struct i2c_board_info *info) |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1304 | { |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1305 | struct i2c_adapter *adapter = client->adapter; |
| 1306 | int val1, val2; |
| 1307 | unsigned short address = client->addr; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1308 | |
| 1309 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1310 | return -ENODEV; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1311 | } |
| 1312 | |
Jean Delvare | 2de1875 | 2009-12-09 20:35:56 +0100 | [diff] [blame] | 1313 | if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) |
| 1314 | return -ENODEV; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1315 | |
Jean Delvare | 2de1875 | 2009-12-09 20:35:56 +0100 | [diff] [blame] | 1316 | val1 = w83792d_read_value(client, W83792D_REG_BANK); |
| 1317 | val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); |
| 1318 | /* Check for Winbond ID if in bank 0 */ |
| 1319 | if (!(val1 & 0x07)) { /* is Bank0 */ |
| 1320 | if ((!(val1 & 0x80) && val2 != 0xa3) || |
| 1321 | ( (val1 & 0x80) && val2 != 0x5c)) |
| 1322 | return -ENODEV; |
| 1323 | } |
| 1324 | /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR |
| 1325 | should match */ |
| 1326 | if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) |
| 1327 | return -ENODEV; |
| 1328 | |
| 1329 | /* Put it now into bank 0 and Vendor ID High Byte */ |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1330 | w83792d_write_value(client, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1331 | W83792D_REG_BANK, |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1332 | (w83792d_read_value(client, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1333 | W83792D_REG_BANK) & 0x78) | 0x80); |
| 1334 | |
| 1335 | /* Determine the chip type. */ |
Jean Delvare | 2de1875 | 2009-12-09 20:35:56 +0100 | [diff] [blame] | 1336 | val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); |
| 1337 | val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); |
| 1338 | if (val1 != 0x7a || val2 != 0x5c) |
| 1339 | return -ENODEV; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1340 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1341 | strlcpy(info->type, "w83792d", I2C_NAME_SIZE); |
| 1342 | |
| 1343 | return 0; |
| 1344 | } |
| 1345 | |
| 1346 | static int |
| 1347 | w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| 1348 | { |
| 1349 | struct w83792d_data *data; |
| 1350 | struct device *dev = &client->dev; |
| 1351 | int i, val1, err; |
| 1352 | |
| 1353 | data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL); |
| 1354 | if (!data) { |
| 1355 | err = -ENOMEM; |
| 1356 | goto ERROR0; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1357 | } |
| 1358 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1359 | i2c_set_clientdata(client, data); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1360 | data->valid = 0; |
Ingo Molnar | 9a61bf6 | 2006-01-18 23:19:26 +0100 | [diff] [blame] | 1361 | mutex_init(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1362 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1363 | err = w83792d_detect_subclients(client); |
| 1364 | if (err) |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1365 | goto ERROR1; |
| 1366 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1367 | /* Initialize the chip */ |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1368 | w83792d_init_client(client); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1369 | |
| 1370 | /* A few vars need to be filled upon startup */ |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1371 | for (i = 0; i < 7; i++) { |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1372 | data->fan_min[i] = w83792d_read_value(client, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1373 | W83792D_REG_FAN_MIN[i]); |
| 1374 | } |
| 1375 | |
| 1376 | /* Register sysfs hooks */ |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1377 | if ((err = sysfs_create_group(&dev->kobj, &w83792d_group))) |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 1378 | goto ERROR3; |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1379 | |
| 1380 | /* Read GPIO enable register to check if pins for fan 4,5 are used as |
| 1381 | GPIO */ |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1382 | val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN); |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1383 | |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1384 | if (!(val1 & 0x40)) |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1385 | if ((err = sysfs_create_group(&dev->kobj, |
| 1386 | &w83792d_group_fan[0]))) |
| 1387 | goto exit_remove_files; |
| 1388 | |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1389 | if (!(val1 & 0x20)) |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1390 | if ((err = sysfs_create_group(&dev->kobj, |
| 1391 | &w83792d_group_fan[1]))) |
| 1392 | goto exit_remove_files; |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1393 | |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1394 | val1 = w83792d_read_value(client, W83792D_REG_PIN); |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1395 | if (val1 & 0x40) |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1396 | if ((err = sysfs_create_group(&dev->kobj, |
| 1397 | &w83792d_group_fan[2]))) |
| 1398 | goto exit_remove_files; |
| 1399 | |
Jean Delvare | 9632051 | 2005-11-29 22:27:14 +0100 | [diff] [blame] | 1400 | if (val1 & 0x04) |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1401 | if ((err = sysfs_create_group(&dev->kobj, |
| 1402 | &w83792d_group_fan[3]))) |
| 1403 | goto exit_remove_files; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1404 | |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 1405 | data->hwmon_dev = hwmon_device_register(dev); |
| 1406 | if (IS_ERR(data->hwmon_dev)) { |
| 1407 | err = PTR_ERR(data->hwmon_dev); |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1408 | goto exit_remove_files; |
Yuan Mu | 1f8dae3 | 2006-01-18 23:11:55 +0100 | [diff] [blame] | 1409 | } |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1410 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1411 | return 0; |
| 1412 | |
Rudolf Marek | f52f79d | 2006-09-24 21:24:12 +0200 | [diff] [blame] | 1413 | exit_remove_files: |
| 1414 | sysfs_remove_group(&dev->kobj, &w83792d_group); |
| 1415 | for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) |
| 1416 | sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]); |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 1417 | ERROR3: |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1418 | if (data->lm75[0] != NULL) |
| 1419 | i2c_unregister_device(data->lm75[0]); |
| 1420 | if (data->lm75[1] != NULL) |
| 1421 | i2c_unregister_device(data->lm75[1]); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1422 | ERROR1: |
| 1423 | kfree(data); |
| 1424 | ERROR0: |
| 1425 | return err; |
| 1426 | } |
| 1427 | |
| 1428 | static int |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1429 | w83792d_remove(struct i2c_client *client) |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1430 | { |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 1431 | struct w83792d_data *data = i2c_get_clientdata(client); |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1432 | int i; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1433 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1434 | hwmon_device_unregister(data->hwmon_dev); |
| 1435 | sysfs_remove_group(&client->dev.kobj, &w83792d_group); |
| 1436 | for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) |
| 1437 | sysfs_remove_group(&client->dev.kobj, |
| 1438 | &w83792d_group_fan[i]); |
R.Marek@sh.cvut.cz | ce785ab | 2005-07-27 11:50:18 +0000 | [diff] [blame] | 1439 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1440 | if (data->lm75[0] != NULL) |
| 1441 | i2c_unregister_device(data->lm75[0]); |
| 1442 | if (data->lm75[1] != NULL) |
| 1443 | i2c_unregister_device(data->lm75[1]); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1444 | |
Jean Delvare | 31d5d27 | 2008-07-16 19:30:17 +0200 | [diff] [blame] | 1445 | kfree(data); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1446 | return 0; |
| 1447 | } |
| 1448 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1449 | static void |
| 1450 | w83792d_init_client(struct i2c_client *client) |
| 1451 | { |
| 1452 | u8 temp2_cfg, temp3_cfg, vid_in_b; |
| 1453 | |
| 1454 | if (init) { |
| 1455 | w83792d_write_value(client, W83792D_REG_CONFIG, 0x80); |
| 1456 | } |
| 1457 | /* Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0): |
| 1458 | W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of |
| 1459 | vin0/vin1 can be modified by user; |
| 1460 | W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of |
| 1461 | vin0/vin1 auto-updated, can NOT be modified by user. */ |
| 1462 | vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B); |
| 1463 | w83792d_write_value(client, W83792D_REG_VID_IN_B, |
| 1464 | vid_in_b & 0xbf); |
| 1465 | |
| 1466 | temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG); |
| 1467 | temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG); |
| 1468 | w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG, |
| 1469 | temp2_cfg & 0xe6); |
| 1470 | w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG, |
| 1471 | temp3_cfg & 0xe6); |
| 1472 | |
| 1473 | /* Start monitoring */ |
| 1474 | w83792d_write_value(client, W83792D_REG_CONFIG, |
| 1475 | (w83792d_read_value(client, |
| 1476 | W83792D_REG_CONFIG) & 0xf7) |
| 1477 | | 0x01); |
| 1478 | } |
| 1479 | |
| 1480 | static struct w83792d_data *w83792d_update_device(struct device *dev) |
| 1481 | { |
| 1482 | struct i2c_client *client = to_i2c_client(dev); |
| 1483 | struct w83792d_data *data = i2c_get_clientdata(client); |
| 1484 | int i, j; |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 1485 | u8 reg_array_tmp[4], reg_tmp; |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1486 | |
Ingo Molnar | 9a61bf6 | 2006-01-18 23:19:26 +0100 | [diff] [blame] | 1487 | mutex_lock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1488 | |
| 1489 | if (time_after |
| 1490 | (jiffies - data->last_updated, (unsigned long) (HZ * 3)) |
| 1491 | || time_before(jiffies, data->last_updated) || !data->valid) { |
| 1492 | dev_dbg(dev, "Starting device update\n"); |
| 1493 | |
| 1494 | /* Update the voltages measured value and limits */ |
| 1495 | for (i = 0; i < 9; i++) { |
| 1496 | data->in[i] = w83792d_read_value(client, |
| 1497 | W83792D_REG_IN[i]); |
| 1498 | data->in_max[i] = w83792d_read_value(client, |
| 1499 | W83792D_REG_IN_MAX[i]); |
| 1500 | data->in_min[i] = w83792d_read_value(client, |
| 1501 | W83792D_REG_IN_MIN[i]); |
| 1502 | } |
Jean Delvare | 99d8556 | 2005-12-18 16:34:28 +0100 | [diff] [blame] | 1503 | data->low_bits = w83792d_read_value(client, |
| 1504 | W83792D_REG_LOW_BITS1) + |
| 1505 | (w83792d_read_value(client, |
| 1506 | W83792D_REG_LOW_BITS2) << 8); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1507 | for (i = 0; i < 7; i++) { |
| 1508 | /* Update the Fan measured value and limits */ |
| 1509 | data->fan[i] = w83792d_read_value(client, |
| 1510 | W83792D_REG_FAN[i]); |
| 1511 | data->fan_min[i] = w83792d_read_value(client, |
| 1512 | W83792D_REG_FAN_MIN[i]); |
| 1513 | /* Update the PWM/DC Value and PWM/DC flag */ |
Yuan Mu | 53e2761 | 2006-06-04 20:18:05 +0200 | [diff] [blame] | 1514 | data->pwm[i] = w83792d_read_value(client, |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1515 | W83792D_REG_PWM[i]); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1516 | } |
| 1517 | |
| 1518 | reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG); |
| 1519 | data->pwmenable[0] = reg_tmp & 0x03; |
| 1520 | data->pwmenable[1] = (reg_tmp>>2) & 0x03; |
| 1521 | data->pwmenable[2] = (reg_tmp>>4) & 0x03; |
| 1522 | |
| 1523 | for (i = 0; i < 3; i++) { |
| 1524 | data->temp1[i] = w83792d_read_value(client, |
| 1525 | W83792D_REG_TEMP1[i]); |
| 1526 | } |
| 1527 | for (i = 0; i < 2; i++) { |
| 1528 | for (j = 0; j < 6; j++) { |
| 1529 | data->temp_add[i][j] = w83792d_read_value( |
| 1530 | client,W83792D_REG_TEMP_ADD[i][j]); |
| 1531 | } |
| 1532 | } |
| 1533 | |
| 1534 | /* Update the Fan Divisor */ |
| 1535 | for (i = 0; i < 4; i++) { |
| 1536 | reg_array_tmp[i] = w83792d_read_value(client, |
| 1537 | W83792D_REG_FAN_DIV[i]); |
| 1538 | } |
| 1539 | data->fan_div[0] = reg_array_tmp[0] & 0x07; |
| 1540 | data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07; |
| 1541 | data->fan_div[2] = reg_array_tmp[1] & 0x07; |
| 1542 | data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07; |
| 1543 | data->fan_div[4] = reg_array_tmp[2] & 0x07; |
| 1544 | data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07; |
| 1545 | data->fan_div[6] = reg_array_tmp[3] & 0x07; |
| 1546 | |
| 1547 | /* Update the realtime status */ |
| 1548 | data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) + |
| 1549 | (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) + |
| 1550 | (w83792d_read_value(client, W83792D_REG_ALARM3) << 16); |
| 1551 | |
| 1552 | /* Update CaseOpen status and it's CLR_CHS. */ |
| 1553 | data->chassis = (w83792d_read_value(client, |
| 1554 | W83792D_REG_CHASSIS) >> 5) & 0x01; |
| 1555 | data->chassis_clear = (w83792d_read_value(client, |
| 1556 | W83792D_REG_CHASSIS_CLR) >> 7) & 0x01; |
| 1557 | |
| 1558 | /* Update Thermal Cruise/Smart Fan I target value */ |
| 1559 | for (i = 0; i < 3; i++) { |
| 1560 | data->thermal_cruise[i] = |
| 1561 | w83792d_read_value(client, |
| 1562 | W83792D_REG_THERMAL[i]) & 0x7f; |
| 1563 | } |
| 1564 | |
| 1565 | /* Update Smart Fan I/II tolerance */ |
| 1566 | reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]); |
| 1567 | data->tolerance[0] = reg_tmp & 0x0f; |
| 1568 | data->tolerance[1] = (reg_tmp >> 4) & 0x0f; |
| 1569 | data->tolerance[2] = w83792d_read_value(client, |
| 1570 | W83792D_REG_TOLERANCE[2]) & 0x0f; |
| 1571 | |
| 1572 | /* Update Smart Fan II temperature points */ |
| 1573 | for (i = 0; i < 3; i++) { |
| 1574 | for (j = 0; j < 4; j++) { |
| 1575 | data->sf2_points[i][j] = w83792d_read_value( |
| 1576 | client,W83792D_REG_POINTS[i][j]) & 0x7f; |
| 1577 | } |
| 1578 | } |
| 1579 | |
| 1580 | /* Update Smart Fan II duty cycle levels */ |
| 1581 | for (i = 0; i < 3; i++) { |
| 1582 | reg_tmp = w83792d_read_value(client, |
| 1583 | W83792D_REG_LEVELS[i][0]); |
| 1584 | data->sf2_levels[i][0] = reg_tmp & 0x0f; |
| 1585 | data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f; |
| 1586 | reg_tmp = w83792d_read_value(client, |
| 1587 | W83792D_REG_LEVELS[i][2]); |
| 1588 | data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f; |
| 1589 | data->sf2_levels[i][3] = reg_tmp & 0x0f; |
| 1590 | } |
| 1591 | |
| 1592 | data->last_updated = jiffies; |
| 1593 | data->valid = 1; |
| 1594 | } |
| 1595 | |
Ingo Molnar | 9a61bf6 | 2006-01-18 23:19:26 +0100 | [diff] [blame] | 1596 | mutex_unlock(&data->update_lock); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1597 | |
| 1598 | #ifdef DEBUG |
| 1599 | w83792d_print_debug(data, dev); |
| 1600 | #endif |
| 1601 | |
| 1602 | return data; |
| 1603 | } |
| 1604 | |
| 1605 | #ifdef DEBUG |
| 1606 | static void w83792d_print_debug(struct w83792d_data *data, struct device *dev) |
| 1607 | { |
| 1608 | int i=0, j=0; |
| 1609 | dev_dbg(dev, "==========The following is the debug message...========\n"); |
| 1610 | dev_dbg(dev, "9 set of Voltages: =====>\n"); |
| 1611 | for (i=0; i<9; i++) { |
| 1612 | dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]); |
| 1613 | dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]); |
| 1614 | dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]); |
| 1615 | } |
Jean Delvare | 99d8556 | 2005-12-18 16:34:28 +0100 | [diff] [blame] | 1616 | dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff); |
| 1617 | dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1618 | dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n"); |
| 1619 | for (i=0; i<7; i++) { |
| 1620 | dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]); |
| 1621 | dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]); |
| 1622 | dev_dbg(dev, "pwm[%d] is: 0x%x\n", i, data->pwm[i]); |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1623 | } |
| 1624 | dev_dbg(dev, "3 set of Temperatures: =====>\n"); |
| 1625 | for (i=0; i<3; i++) { |
| 1626 | dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]); |
| 1627 | } |
| 1628 | |
| 1629 | for (i=0; i<2; i++) { |
| 1630 | for (j=0; j<6; j++) { |
| 1631 | dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j, |
| 1632 | data->temp_add[i][j]); |
| 1633 | } |
| 1634 | } |
| 1635 | |
| 1636 | for (i=0; i<7; i++) { |
| 1637 | dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]); |
| 1638 | } |
| 1639 | dev_dbg(dev, "==========End of the debug message...==================\n"); |
| 1640 | dev_dbg(dev, "\n"); |
| 1641 | } |
| 1642 | #endif |
| 1643 | |
| 1644 | static int __init |
| 1645 | sensors_w83792d_init(void) |
| 1646 | { |
| 1647 | return i2c_add_driver(&w83792d_driver); |
| 1648 | } |
| 1649 | |
| 1650 | static void __exit |
| 1651 | sensors_w83792d_exit(void) |
| 1652 | { |
| 1653 | i2c_del_driver(&w83792d_driver); |
| 1654 | } |
| 1655 | |
| 1656 | MODULE_AUTHOR("Chunhao Huang @ Winbond <DZShen@Winbond.com.tw>"); |
| 1657 | MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6"); |
| 1658 | MODULE_LICENSE("GPL"); |
| 1659 | |
| 1660 | module_init(sensors_w83792d_init); |
| 1661 | module_exit(sensors_w83792d_exit); |
| 1662 | |