Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/video/omap2/dss/dsi.c |
| 3 | * |
| 4 | * Copyright (C) 2009 Nokia Corporation |
| 5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 14 | * more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License along with |
| 17 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 18 | */ |
| 19 | |
| 20 | #define DSS_SUBSYS_NAME "DSI" |
| 21 | |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/io.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/device.h> |
| 26 | #include <linux/err.h> |
| 27 | #include <linux/interrupt.h> |
| 28 | #include <linux/delay.h> |
| 29 | #include <linux/mutex.h> |
| 30 | #include <linux/seq_file.h> |
| 31 | #include <linux/platform_device.h> |
| 32 | #include <linux/regulator/consumer.h> |
| 33 | #include <linux/kthread.h> |
| 34 | #include <linux/wait.h> |
| 35 | |
| 36 | #include <plat/display.h> |
| 37 | #include <plat/clock.h> |
| 38 | |
| 39 | #include "dss.h" |
| 40 | |
| 41 | /*#define VERBOSE_IRQ*/ |
| 42 | #define DSI_CATCH_MISSING_TE |
| 43 | |
| 44 | #define DSI_BASE 0x4804FC00 |
| 45 | |
| 46 | struct dsi_reg { u16 idx; }; |
| 47 | |
| 48 | #define DSI_REG(idx) ((const struct dsi_reg) { idx }) |
| 49 | |
| 50 | #define DSI_SZ_REGS SZ_1K |
| 51 | /* DSI Protocol Engine */ |
| 52 | |
| 53 | #define DSI_REVISION DSI_REG(0x0000) |
| 54 | #define DSI_SYSCONFIG DSI_REG(0x0010) |
| 55 | #define DSI_SYSSTATUS DSI_REG(0x0014) |
| 56 | #define DSI_IRQSTATUS DSI_REG(0x0018) |
| 57 | #define DSI_IRQENABLE DSI_REG(0x001C) |
| 58 | #define DSI_CTRL DSI_REG(0x0040) |
| 59 | #define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) |
| 60 | #define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) |
| 61 | #define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) |
| 62 | #define DSI_CLK_CTRL DSI_REG(0x0054) |
| 63 | #define DSI_TIMING1 DSI_REG(0x0058) |
| 64 | #define DSI_TIMING2 DSI_REG(0x005C) |
| 65 | #define DSI_VM_TIMING1 DSI_REG(0x0060) |
| 66 | #define DSI_VM_TIMING2 DSI_REG(0x0064) |
| 67 | #define DSI_VM_TIMING3 DSI_REG(0x0068) |
| 68 | #define DSI_CLK_TIMING DSI_REG(0x006C) |
| 69 | #define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) |
| 70 | #define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) |
| 71 | #define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) |
| 72 | #define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) |
| 73 | #define DSI_VM_TIMING4 DSI_REG(0x0080) |
| 74 | #define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) |
| 75 | #define DSI_VM_TIMING5 DSI_REG(0x0088) |
| 76 | #define DSI_VM_TIMING6 DSI_REG(0x008C) |
| 77 | #define DSI_VM_TIMING7 DSI_REG(0x0090) |
| 78 | #define DSI_STOPCLK_TIMING DSI_REG(0x0094) |
| 79 | #define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) |
| 80 | #define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) |
| 81 | #define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) |
| 82 | #define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) |
| 83 | #define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) |
| 84 | #define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) |
| 85 | #define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) |
| 86 | |
| 87 | /* DSIPHY_SCP */ |
| 88 | |
| 89 | #define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) |
| 90 | #define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) |
| 91 | #define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) |
| 92 | #define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) |
| 93 | |
| 94 | /* DSI_PLL_CTRL_SCP */ |
| 95 | |
| 96 | #define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) |
| 97 | #define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) |
| 98 | #define DSI_PLL_GO DSI_REG(0x300 + 0x0008) |
| 99 | #define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) |
| 100 | #define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) |
| 101 | |
| 102 | #define REG_GET(idx, start, end) \ |
| 103 | FLD_GET(dsi_read_reg(idx), start, end) |
| 104 | |
| 105 | #define REG_FLD_MOD(idx, val, start, end) \ |
| 106 | dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) |
| 107 | |
| 108 | /* Global interrupts */ |
| 109 | #define DSI_IRQ_VC0 (1 << 0) |
| 110 | #define DSI_IRQ_VC1 (1 << 1) |
| 111 | #define DSI_IRQ_VC2 (1 << 2) |
| 112 | #define DSI_IRQ_VC3 (1 << 3) |
| 113 | #define DSI_IRQ_WAKEUP (1 << 4) |
| 114 | #define DSI_IRQ_RESYNC (1 << 5) |
| 115 | #define DSI_IRQ_PLL_LOCK (1 << 7) |
| 116 | #define DSI_IRQ_PLL_UNLOCK (1 << 8) |
| 117 | #define DSI_IRQ_PLL_RECALL (1 << 9) |
| 118 | #define DSI_IRQ_COMPLEXIO_ERR (1 << 10) |
| 119 | #define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) |
| 120 | #define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) |
| 121 | #define DSI_IRQ_TE_TRIGGER (1 << 16) |
| 122 | #define DSI_IRQ_ACK_TRIGGER (1 << 17) |
| 123 | #define DSI_IRQ_SYNC_LOST (1 << 18) |
| 124 | #define DSI_IRQ_LDO_POWER_GOOD (1 << 19) |
| 125 | #define DSI_IRQ_TA_TIMEOUT (1 << 20) |
| 126 | #define DSI_IRQ_ERROR_MASK \ |
| 127 | (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ |
| 128 | DSI_IRQ_TA_TIMEOUT) |
| 129 | #define DSI_IRQ_CHANNEL_MASK 0xf |
| 130 | |
| 131 | /* Virtual channel interrupts */ |
| 132 | #define DSI_VC_IRQ_CS (1 << 0) |
| 133 | #define DSI_VC_IRQ_ECC_CORR (1 << 1) |
| 134 | #define DSI_VC_IRQ_PACKET_SENT (1 << 2) |
| 135 | #define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) |
| 136 | #define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) |
| 137 | #define DSI_VC_IRQ_BTA (1 << 5) |
| 138 | #define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) |
| 139 | #define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) |
| 140 | #define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) |
| 141 | #define DSI_VC_IRQ_ERROR_MASK \ |
| 142 | (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ |
| 143 | DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ |
| 144 | DSI_VC_IRQ_FIFO_TX_UDF) |
| 145 | |
| 146 | /* ComplexIO interrupts */ |
| 147 | #define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) |
| 148 | #define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) |
| 149 | #define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) |
| 150 | #define DSI_CIO_IRQ_ERRESC1 (1 << 5) |
| 151 | #define DSI_CIO_IRQ_ERRESC2 (1 << 6) |
| 152 | #define DSI_CIO_IRQ_ERRESC3 (1 << 7) |
| 153 | #define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) |
| 154 | #define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) |
| 155 | #define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) |
| 156 | #define DSI_CIO_IRQ_STATEULPS1 (1 << 15) |
| 157 | #define DSI_CIO_IRQ_STATEULPS2 (1 << 16) |
| 158 | #define DSI_CIO_IRQ_STATEULPS3 (1 << 17) |
| 159 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) |
| 160 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) |
| 161 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) |
| 162 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) |
| 163 | #define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) |
| 164 | #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) |
| 165 | #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) |
| 166 | #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) |
| 167 | |
| 168 | #define DSI_DT_DCS_SHORT_WRITE_0 0x05 |
| 169 | #define DSI_DT_DCS_SHORT_WRITE_1 0x15 |
| 170 | #define DSI_DT_DCS_READ 0x06 |
| 171 | #define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 |
| 172 | #define DSI_DT_NULL_PACKET 0x09 |
| 173 | #define DSI_DT_DCS_LONG_WRITE 0x39 |
| 174 | |
| 175 | #define DSI_DT_RX_ACK_WITH_ERR 0x02 |
| 176 | #define DSI_DT_RX_DCS_LONG_READ 0x1c |
| 177 | #define DSI_DT_RX_SHORT_READ_1 0x21 |
| 178 | #define DSI_DT_RX_SHORT_READ_2 0x22 |
| 179 | |
| 180 | #define FINT_MAX 2100000 |
| 181 | #define FINT_MIN 750000 |
| 182 | #define REGN_MAX (1 << 7) |
| 183 | #define REGM_MAX ((1 << 11) - 1) |
| 184 | #define REGM3_MAX (1 << 4) |
| 185 | #define REGM4_MAX (1 << 4) |
| 186 | #define LP_DIV_MAX ((1 << 13) - 1) |
| 187 | |
| 188 | enum fifo_size { |
| 189 | DSI_FIFO_SIZE_0 = 0, |
| 190 | DSI_FIFO_SIZE_32 = 1, |
| 191 | DSI_FIFO_SIZE_64 = 2, |
| 192 | DSI_FIFO_SIZE_96 = 3, |
| 193 | DSI_FIFO_SIZE_128 = 4, |
| 194 | }; |
| 195 | |
| 196 | enum dsi_vc_mode { |
| 197 | DSI_VC_MODE_L4 = 0, |
| 198 | DSI_VC_MODE_VP, |
| 199 | }; |
| 200 | |
| 201 | struct dsi_update_region { |
| 202 | bool dirty; |
| 203 | u16 x, y, w, h; |
| 204 | struct omap_dss_device *device; |
| 205 | }; |
| 206 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 207 | struct dsi_irq_stats { |
| 208 | unsigned long last_reset; |
| 209 | unsigned irq_count; |
| 210 | unsigned dsi_irqs[32]; |
| 211 | unsigned vc_irqs[4][32]; |
| 212 | unsigned cio_irqs[32]; |
| 213 | }; |
| 214 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 215 | static struct |
| 216 | { |
| 217 | void __iomem *base; |
| 218 | |
| 219 | struct dsi_clock_info current_cinfo; |
| 220 | |
| 221 | struct regulator *vdds_dsi_reg; |
| 222 | |
| 223 | struct { |
| 224 | enum dsi_vc_mode mode; |
| 225 | struct omap_dss_device *dssdev; |
| 226 | enum fifo_size fifo_size; |
| 227 | int dest_per; /* destination peripheral 0-3 */ |
| 228 | } vc[4]; |
| 229 | |
| 230 | struct mutex lock; |
| 231 | struct mutex bus_lock; |
| 232 | |
| 233 | unsigned pll_locked; |
| 234 | |
| 235 | struct completion bta_completion; |
| 236 | |
| 237 | struct task_struct *thread; |
| 238 | wait_queue_head_t waitqueue; |
| 239 | |
| 240 | spinlock_t update_lock; |
| 241 | bool framedone_received; |
| 242 | struct dsi_update_region update_region; |
| 243 | struct dsi_update_region active_update_region; |
| 244 | struct completion update_completion; |
| 245 | |
| 246 | enum omap_dss_update_mode user_update_mode; |
| 247 | enum omap_dss_update_mode update_mode; |
| 248 | bool te_enabled; |
| 249 | bool use_ext_te; |
| 250 | |
| 251 | #ifdef DSI_CATCH_MISSING_TE |
| 252 | struct timer_list te_timer; |
| 253 | #endif |
| 254 | |
| 255 | unsigned long cache_req_pck; |
| 256 | unsigned long cache_clk_freq; |
| 257 | struct dsi_clock_info cache_cinfo; |
| 258 | |
| 259 | u32 errors; |
| 260 | spinlock_t errors_lock; |
| 261 | #ifdef DEBUG |
| 262 | ktime_t perf_setup_time; |
| 263 | ktime_t perf_start_time; |
| 264 | ktime_t perf_start_time_auto; |
| 265 | int perf_measure_frames; |
| 266 | #endif |
| 267 | int debug_read; |
| 268 | int debug_write; |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 269 | |
| 270 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 271 | spinlock_t irq_stats_lock; |
| 272 | struct dsi_irq_stats irq_stats; |
| 273 | #endif |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 274 | } dsi; |
| 275 | |
| 276 | #ifdef DEBUG |
| 277 | static unsigned int dsi_perf; |
| 278 | module_param_named(dsi_perf, dsi_perf, bool, 0644); |
| 279 | #endif |
| 280 | |
| 281 | static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) |
| 282 | { |
| 283 | __raw_writel(val, dsi.base + idx.idx); |
| 284 | } |
| 285 | |
| 286 | static inline u32 dsi_read_reg(const struct dsi_reg idx) |
| 287 | { |
| 288 | return __raw_readl(dsi.base + idx.idx); |
| 289 | } |
| 290 | |
| 291 | |
| 292 | void dsi_save_context(void) |
| 293 | { |
| 294 | } |
| 295 | |
| 296 | void dsi_restore_context(void) |
| 297 | { |
| 298 | } |
| 299 | |
| 300 | void dsi_bus_lock(void) |
| 301 | { |
| 302 | mutex_lock(&dsi.bus_lock); |
| 303 | } |
| 304 | EXPORT_SYMBOL(dsi_bus_lock); |
| 305 | |
| 306 | void dsi_bus_unlock(void) |
| 307 | { |
| 308 | mutex_unlock(&dsi.bus_lock); |
| 309 | } |
| 310 | EXPORT_SYMBOL(dsi_bus_unlock); |
| 311 | |
Tomi Valkeinen | 4f76502 | 2010-01-18 16:27:52 +0200 | [diff] [blame] | 312 | static bool dsi_bus_is_locked(void) |
| 313 | { |
| 314 | return mutex_is_locked(&dsi.bus_lock); |
| 315 | } |
| 316 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 317 | static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, |
| 318 | int value) |
| 319 | { |
| 320 | int t = 100000; |
| 321 | |
| 322 | while (REG_GET(idx, bitnum, bitnum) != value) { |
| 323 | if (--t == 0) |
| 324 | return !value; |
| 325 | } |
| 326 | |
| 327 | return value; |
| 328 | } |
| 329 | |
| 330 | #ifdef DEBUG |
| 331 | static void dsi_perf_mark_setup(void) |
| 332 | { |
| 333 | dsi.perf_setup_time = ktime_get(); |
| 334 | } |
| 335 | |
| 336 | static void dsi_perf_mark_start(void) |
| 337 | { |
| 338 | dsi.perf_start_time = ktime_get(); |
| 339 | } |
| 340 | |
| 341 | static void dsi_perf_mark_start_auto(void) |
| 342 | { |
| 343 | dsi.perf_measure_frames = 0; |
| 344 | dsi.perf_start_time_auto = ktime_get(); |
| 345 | } |
| 346 | |
| 347 | static void dsi_perf_show(const char *name) |
| 348 | { |
| 349 | ktime_t t, setup_time, trans_time; |
| 350 | u32 total_bytes; |
| 351 | u32 setup_us, trans_us, total_us; |
| 352 | |
| 353 | if (!dsi_perf) |
| 354 | return; |
| 355 | |
| 356 | if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) |
| 357 | return; |
| 358 | |
| 359 | t = ktime_get(); |
| 360 | |
| 361 | setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); |
| 362 | setup_us = (u32)ktime_to_us(setup_time); |
| 363 | if (setup_us == 0) |
| 364 | setup_us = 1; |
| 365 | |
| 366 | trans_time = ktime_sub(t, dsi.perf_start_time); |
| 367 | trans_us = (u32)ktime_to_us(trans_time); |
| 368 | if (trans_us == 0) |
| 369 | trans_us = 1; |
| 370 | |
| 371 | total_us = setup_us + trans_us; |
| 372 | |
| 373 | total_bytes = dsi.active_update_region.w * |
| 374 | dsi.active_update_region.h * |
| 375 | dsi.active_update_region.device->ctrl.pixel_size / 8; |
| 376 | |
| 377 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { |
| 378 | static u32 s_total_trans_us, s_total_setup_us; |
| 379 | static u32 s_min_trans_us = 0xffffffff, s_min_setup_us; |
| 380 | static u32 s_max_trans_us, s_max_setup_us; |
| 381 | const int numframes = 100; |
| 382 | ktime_t total_time_auto; |
| 383 | u32 total_time_auto_us; |
| 384 | |
| 385 | dsi.perf_measure_frames++; |
| 386 | |
| 387 | if (setup_us < s_min_setup_us) |
| 388 | s_min_setup_us = setup_us; |
| 389 | |
| 390 | if (setup_us > s_max_setup_us) |
| 391 | s_max_setup_us = setup_us; |
| 392 | |
| 393 | s_total_setup_us += setup_us; |
| 394 | |
| 395 | if (trans_us < s_min_trans_us) |
| 396 | s_min_trans_us = trans_us; |
| 397 | |
| 398 | if (trans_us > s_max_trans_us) |
| 399 | s_max_trans_us = trans_us; |
| 400 | |
| 401 | s_total_trans_us += trans_us; |
| 402 | |
| 403 | if (dsi.perf_measure_frames < numframes) |
| 404 | return; |
| 405 | |
| 406 | total_time_auto = ktime_sub(t, dsi.perf_start_time_auto); |
| 407 | total_time_auto_us = (u32)ktime_to_us(total_time_auto); |
| 408 | |
| 409 | printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, " |
| 410 | "trans %u/%u/%u\n", |
| 411 | name, |
| 412 | 1000 * 1000 * numframes / total_time_auto_us, |
| 413 | s_min_setup_us, |
| 414 | s_max_setup_us, |
| 415 | s_total_setup_us / numframes, |
| 416 | s_min_trans_us, |
| 417 | s_max_trans_us, |
| 418 | s_total_trans_us / numframes); |
| 419 | |
| 420 | s_total_setup_us = 0; |
| 421 | s_min_setup_us = 0xffffffff; |
| 422 | s_max_setup_us = 0; |
| 423 | s_total_trans_us = 0; |
| 424 | s_min_trans_us = 0xffffffff; |
| 425 | s_max_trans_us = 0; |
| 426 | dsi_perf_mark_start_auto(); |
| 427 | } else { |
| 428 | printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " |
| 429 | "%u bytes, %u kbytes/sec\n", |
| 430 | name, |
| 431 | setup_us, |
| 432 | trans_us, |
| 433 | total_us, |
| 434 | 1000*1000 / total_us, |
| 435 | total_bytes, |
| 436 | total_bytes * 1000 / total_us); |
| 437 | } |
| 438 | } |
| 439 | #else |
| 440 | #define dsi_perf_mark_setup() |
| 441 | #define dsi_perf_mark_start() |
| 442 | #define dsi_perf_mark_start_auto() |
| 443 | #define dsi_perf_show(x) |
| 444 | #endif |
| 445 | |
| 446 | static void print_irq_status(u32 status) |
| 447 | { |
| 448 | #ifndef VERBOSE_IRQ |
| 449 | if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) |
| 450 | return; |
| 451 | #endif |
| 452 | printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); |
| 453 | |
| 454 | #define PIS(x) \ |
| 455 | if (status & DSI_IRQ_##x) \ |
| 456 | printk(#x " "); |
| 457 | #ifdef VERBOSE_IRQ |
| 458 | PIS(VC0); |
| 459 | PIS(VC1); |
| 460 | PIS(VC2); |
| 461 | PIS(VC3); |
| 462 | #endif |
| 463 | PIS(WAKEUP); |
| 464 | PIS(RESYNC); |
| 465 | PIS(PLL_LOCK); |
| 466 | PIS(PLL_UNLOCK); |
| 467 | PIS(PLL_RECALL); |
| 468 | PIS(COMPLEXIO_ERR); |
| 469 | PIS(HS_TX_TIMEOUT); |
| 470 | PIS(LP_RX_TIMEOUT); |
| 471 | PIS(TE_TRIGGER); |
| 472 | PIS(ACK_TRIGGER); |
| 473 | PIS(SYNC_LOST); |
| 474 | PIS(LDO_POWER_GOOD); |
| 475 | PIS(TA_TIMEOUT); |
| 476 | #undef PIS |
| 477 | |
| 478 | printk("\n"); |
| 479 | } |
| 480 | |
| 481 | static void print_irq_status_vc(int channel, u32 status) |
| 482 | { |
| 483 | #ifndef VERBOSE_IRQ |
| 484 | if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) |
| 485 | return; |
| 486 | #endif |
| 487 | printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); |
| 488 | |
| 489 | #define PIS(x) \ |
| 490 | if (status & DSI_VC_IRQ_##x) \ |
| 491 | printk(#x " "); |
| 492 | PIS(CS); |
| 493 | PIS(ECC_CORR); |
| 494 | #ifdef VERBOSE_IRQ |
| 495 | PIS(PACKET_SENT); |
| 496 | #endif |
| 497 | PIS(FIFO_TX_OVF); |
| 498 | PIS(FIFO_RX_OVF); |
| 499 | PIS(BTA); |
| 500 | PIS(ECC_NO_CORR); |
| 501 | PIS(FIFO_TX_UDF); |
| 502 | PIS(PP_BUSY_CHANGE); |
| 503 | #undef PIS |
| 504 | printk("\n"); |
| 505 | } |
| 506 | |
| 507 | static void print_irq_status_cio(u32 status) |
| 508 | { |
| 509 | printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); |
| 510 | |
| 511 | #define PIS(x) \ |
| 512 | if (status & DSI_CIO_IRQ_##x) \ |
| 513 | printk(#x " "); |
| 514 | PIS(ERRSYNCESC1); |
| 515 | PIS(ERRSYNCESC2); |
| 516 | PIS(ERRSYNCESC3); |
| 517 | PIS(ERRESC1); |
| 518 | PIS(ERRESC2); |
| 519 | PIS(ERRESC3); |
| 520 | PIS(ERRCONTROL1); |
| 521 | PIS(ERRCONTROL2); |
| 522 | PIS(ERRCONTROL3); |
| 523 | PIS(STATEULPS1); |
| 524 | PIS(STATEULPS2); |
| 525 | PIS(STATEULPS3); |
| 526 | PIS(ERRCONTENTIONLP0_1); |
| 527 | PIS(ERRCONTENTIONLP1_1); |
| 528 | PIS(ERRCONTENTIONLP0_2); |
| 529 | PIS(ERRCONTENTIONLP1_2); |
| 530 | PIS(ERRCONTENTIONLP0_3); |
| 531 | PIS(ERRCONTENTIONLP1_3); |
| 532 | PIS(ULPSACTIVENOT_ALL0); |
| 533 | PIS(ULPSACTIVENOT_ALL1); |
| 534 | #undef PIS |
| 535 | |
| 536 | printk("\n"); |
| 537 | } |
| 538 | |
| 539 | static int debug_irq; |
| 540 | |
| 541 | /* called from dss */ |
| 542 | void dsi_irq_handler(void) |
| 543 | { |
| 544 | u32 irqstatus, vcstatus, ciostatus; |
| 545 | int i; |
| 546 | |
| 547 | irqstatus = dsi_read_reg(DSI_IRQSTATUS); |
| 548 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 549 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 550 | spin_lock(&dsi.irq_stats_lock); |
| 551 | dsi.irq_stats.irq_count++; |
| 552 | dss_collect_irq_stats(irqstatus, dsi.irq_stats.dsi_irqs); |
| 553 | #endif |
| 554 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 555 | if (irqstatus & DSI_IRQ_ERROR_MASK) { |
| 556 | DSSERR("DSI error, irqstatus %x\n", irqstatus); |
| 557 | print_irq_status(irqstatus); |
| 558 | spin_lock(&dsi.errors_lock); |
| 559 | dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK; |
| 560 | spin_unlock(&dsi.errors_lock); |
| 561 | } else if (debug_irq) { |
| 562 | print_irq_status(irqstatus); |
| 563 | } |
| 564 | |
| 565 | #ifdef DSI_CATCH_MISSING_TE |
| 566 | if (irqstatus & DSI_IRQ_TE_TRIGGER) |
| 567 | del_timer(&dsi.te_timer); |
| 568 | #endif |
| 569 | |
| 570 | for (i = 0; i < 4; ++i) { |
| 571 | if ((irqstatus & (1<<i)) == 0) |
| 572 | continue; |
| 573 | |
| 574 | vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| 575 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 576 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 577 | dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]); |
| 578 | #endif |
| 579 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 580 | if (vcstatus & DSI_VC_IRQ_BTA) |
| 581 | complete(&dsi.bta_completion); |
| 582 | |
| 583 | if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { |
| 584 | DSSERR("DSI VC(%d) error, vc irqstatus %x\n", |
| 585 | i, vcstatus); |
| 586 | print_irq_status_vc(i, vcstatus); |
| 587 | } else if (debug_irq) { |
| 588 | print_irq_status_vc(i, vcstatus); |
| 589 | } |
| 590 | |
| 591 | dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); |
| 592 | /* flush posted write */ |
| 593 | dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| 594 | } |
| 595 | |
| 596 | if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { |
| 597 | ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| 598 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 599 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 600 | dss_collect_irq_stats(ciostatus, dsi.irq_stats.cio_irqs); |
| 601 | #endif |
| 602 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 603 | dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); |
| 604 | /* flush posted write */ |
| 605 | dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| 606 | |
| 607 | DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); |
| 608 | print_irq_status_cio(ciostatus); |
| 609 | } |
| 610 | |
| 611 | dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); |
| 612 | /* flush posted write */ |
| 613 | dsi_read_reg(DSI_IRQSTATUS); |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 614 | |
| 615 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 616 | spin_unlock(&dsi.irq_stats_lock); |
| 617 | #endif |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 618 | } |
| 619 | |
| 620 | |
| 621 | static void _dsi_initialize_irq(void) |
| 622 | { |
| 623 | u32 l; |
| 624 | int i; |
| 625 | |
| 626 | /* disable all interrupts */ |
| 627 | dsi_write_reg(DSI_IRQENABLE, 0); |
| 628 | for (i = 0; i < 4; ++i) |
| 629 | dsi_write_reg(DSI_VC_IRQENABLE(i), 0); |
| 630 | dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); |
| 631 | |
| 632 | /* clear interrupt status */ |
| 633 | l = dsi_read_reg(DSI_IRQSTATUS); |
| 634 | dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); |
| 635 | |
| 636 | for (i = 0; i < 4; ++i) { |
| 637 | l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| 638 | dsi_write_reg(DSI_VC_IRQSTATUS(i), l); |
| 639 | } |
| 640 | |
| 641 | l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| 642 | dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); |
| 643 | |
| 644 | /* enable error irqs */ |
| 645 | l = DSI_IRQ_ERROR_MASK; |
| 646 | #ifdef DSI_CATCH_MISSING_TE |
| 647 | l |= DSI_IRQ_TE_TRIGGER; |
| 648 | #endif |
| 649 | dsi_write_reg(DSI_IRQENABLE, l); |
| 650 | |
| 651 | l = DSI_VC_IRQ_ERROR_MASK; |
| 652 | for (i = 0; i < 4; ++i) |
| 653 | dsi_write_reg(DSI_VC_IRQENABLE(i), l); |
| 654 | |
| 655 | /* XXX zonda responds incorrectly, causing control error: |
| 656 | Exit from LP-ESC mode to LP11 uses wrong transition states on the |
| 657 | data lines LP0 and LN0. */ |
| 658 | dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, |
| 659 | -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); |
| 660 | } |
| 661 | |
| 662 | static u32 dsi_get_errors(void) |
| 663 | { |
| 664 | unsigned long flags; |
| 665 | u32 e; |
| 666 | spin_lock_irqsave(&dsi.errors_lock, flags); |
| 667 | e = dsi.errors; |
| 668 | dsi.errors = 0; |
| 669 | spin_unlock_irqrestore(&dsi.errors_lock, flags); |
| 670 | return e; |
| 671 | } |
| 672 | |
| 673 | static void dsi_vc_enable_bta_irq(int channel) |
| 674 | { |
| 675 | u32 l; |
| 676 | |
| 677 | dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA); |
| 678 | |
| 679 | l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); |
| 680 | l |= DSI_VC_IRQ_BTA; |
| 681 | dsi_write_reg(DSI_VC_IRQENABLE(channel), l); |
| 682 | } |
| 683 | |
| 684 | static void dsi_vc_disable_bta_irq(int channel) |
| 685 | { |
| 686 | u32 l; |
| 687 | |
| 688 | l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); |
| 689 | l &= ~DSI_VC_IRQ_BTA; |
| 690 | dsi_write_reg(DSI_VC_IRQENABLE(channel), l); |
| 691 | } |
| 692 | |
| 693 | /* DSI func clock. this could also be DSI2_PLL_FCLK */ |
| 694 | static inline void enable_clocks(bool enable) |
| 695 | { |
| 696 | if (enable) |
| 697 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| 698 | else |
| 699 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| 700 | } |
| 701 | |
| 702 | /* source clock for DSI PLL. this could also be PCLKFREE */ |
| 703 | static inline void dsi_enable_pll_clock(bool enable) |
| 704 | { |
| 705 | if (enable) |
| 706 | dss_clk_enable(DSS_CLK_FCK2); |
| 707 | else |
| 708 | dss_clk_disable(DSS_CLK_FCK2); |
| 709 | |
| 710 | if (enable && dsi.pll_locked) { |
| 711 | if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) |
| 712 | DSSERR("cannot lock PLL when enabling clocks\n"); |
| 713 | } |
| 714 | } |
| 715 | |
| 716 | #ifdef DEBUG |
| 717 | static void _dsi_print_reset_status(void) |
| 718 | { |
| 719 | u32 l; |
| 720 | |
| 721 | if (!dss_debug) |
| 722 | return; |
| 723 | |
| 724 | /* A dummy read using the SCP interface to any DSIPHY register is |
| 725 | * required after DSIPHY reset to complete the reset of the DSI complex |
| 726 | * I/O. */ |
| 727 | l = dsi_read_reg(DSI_DSIPHY_CFG5); |
| 728 | |
| 729 | printk(KERN_DEBUG "DSI resets: "); |
| 730 | |
| 731 | l = dsi_read_reg(DSI_PLL_STATUS); |
| 732 | printk("PLL (%d) ", FLD_GET(l, 0, 0)); |
| 733 | |
| 734 | l = dsi_read_reg(DSI_COMPLEXIO_CFG1); |
| 735 | printk("CIO (%d) ", FLD_GET(l, 29, 29)); |
| 736 | |
| 737 | l = dsi_read_reg(DSI_DSIPHY_CFG5); |
| 738 | printk("PHY (%x, %d, %d, %d)\n", |
| 739 | FLD_GET(l, 28, 26), |
| 740 | FLD_GET(l, 29, 29), |
| 741 | FLD_GET(l, 30, 30), |
| 742 | FLD_GET(l, 31, 31)); |
| 743 | } |
| 744 | #else |
| 745 | #define _dsi_print_reset_status() |
| 746 | #endif |
| 747 | |
| 748 | static inline int dsi_if_enable(bool enable) |
| 749 | { |
| 750 | DSSDBG("dsi_if_enable(%d)\n", enable); |
| 751 | |
| 752 | enable = enable ? 1 : 0; |
| 753 | REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ |
| 754 | |
| 755 | if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { |
| 756 | DSSERR("Failed to set dsi_if_enable to %d\n", enable); |
| 757 | return -EIO; |
| 758 | } |
| 759 | |
| 760 | return 0; |
| 761 | } |
| 762 | |
| 763 | unsigned long dsi_get_dsi1_pll_rate(void) |
| 764 | { |
| 765 | return dsi.current_cinfo.dsi1_pll_fclk; |
| 766 | } |
| 767 | |
| 768 | static unsigned long dsi_get_dsi2_pll_rate(void) |
| 769 | { |
| 770 | return dsi.current_cinfo.dsi2_pll_fclk; |
| 771 | } |
| 772 | |
| 773 | static unsigned long dsi_get_txbyteclkhs(void) |
| 774 | { |
| 775 | return dsi.current_cinfo.clkin4ddr / 16; |
| 776 | } |
| 777 | |
| 778 | static unsigned long dsi_fclk_rate(void) |
| 779 | { |
| 780 | unsigned long r; |
| 781 | |
| 782 | if (dss_get_dsi_clk_source() == 0) { |
| 783 | /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ |
| 784 | r = dss_clk_get_rate(DSS_CLK_FCK1); |
| 785 | } else { |
| 786 | /* DSI FCLK source is DSI2_PLL_FCLK */ |
| 787 | r = dsi_get_dsi2_pll_rate(); |
| 788 | } |
| 789 | |
| 790 | return r; |
| 791 | } |
| 792 | |
| 793 | static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev) |
| 794 | { |
| 795 | unsigned long dsi_fclk; |
| 796 | unsigned lp_clk_div; |
| 797 | unsigned long lp_clk; |
| 798 | |
| 799 | lp_clk_div = dssdev->phy.dsi.div.lp_clk_div; |
| 800 | |
| 801 | if (lp_clk_div == 0 || lp_clk_div > LP_DIV_MAX) |
| 802 | return -EINVAL; |
| 803 | |
| 804 | dsi_fclk = dsi_fclk_rate(); |
| 805 | |
| 806 | lp_clk = dsi_fclk / 2 / lp_clk_div; |
| 807 | |
| 808 | DSSDBG("LP_CLK_DIV %u, LP_CLK %lu\n", lp_clk_div, lp_clk); |
| 809 | dsi.current_cinfo.lp_clk = lp_clk; |
| 810 | dsi.current_cinfo.lp_clk_div = lp_clk_div; |
| 811 | |
| 812 | REG_FLD_MOD(DSI_CLK_CTRL, lp_clk_div, 12, 0); /* LP_CLK_DIVISOR */ |
| 813 | |
| 814 | REG_FLD_MOD(DSI_CLK_CTRL, dsi_fclk > 30000000 ? 1 : 0, |
| 815 | 21, 21); /* LP_RX_SYNCHRO_ENABLE */ |
| 816 | |
| 817 | return 0; |
| 818 | } |
| 819 | |
| 820 | |
| 821 | enum dsi_pll_power_state { |
| 822 | DSI_PLL_POWER_OFF = 0x0, |
| 823 | DSI_PLL_POWER_ON_HSCLK = 0x1, |
| 824 | DSI_PLL_POWER_ON_ALL = 0x2, |
| 825 | DSI_PLL_POWER_ON_DIV = 0x3, |
| 826 | }; |
| 827 | |
| 828 | static int dsi_pll_power(enum dsi_pll_power_state state) |
| 829 | { |
| 830 | int t = 0; |
| 831 | |
| 832 | REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ |
| 833 | |
| 834 | /* PLL_PWR_STATUS */ |
| 835 | while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 836 | if (++t > 1000) { |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 837 | DSSERR("Failed to set DSI PLL power mode to %d\n", |
| 838 | state); |
| 839 | return -ENODEV; |
| 840 | } |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 841 | udelay(1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 842 | } |
| 843 | |
| 844 | return 0; |
| 845 | } |
| 846 | |
| 847 | /* calculate clock rates using dividers in cinfo */ |
| 848 | static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) |
| 849 | { |
| 850 | if (cinfo->regn == 0 || cinfo->regn > REGN_MAX) |
| 851 | return -EINVAL; |
| 852 | |
| 853 | if (cinfo->regm == 0 || cinfo->regm > REGM_MAX) |
| 854 | return -EINVAL; |
| 855 | |
| 856 | if (cinfo->regm3 > REGM3_MAX) |
| 857 | return -EINVAL; |
| 858 | |
| 859 | if (cinfo->regm4 > REGM4_MAX) |
| 860 | return -EINVAL; |
| 861 | |
| 862 | if (cinfo->use_dss2_fck) { |
| 863 | cinfo->clkin = dss_clk_get_rate(DSS_CLK_FCK2); |
| 864 | /* XXX it is unclear if highfreq should be used |
| 865 | * with DSS2_FCK source also */ |
| 866 | cinfo->highfreq = 0; |
| 867 | } else { |
| 868 | cinfo->clkin = dispc_pclk_rate(); |
| 869 | |
| 870 | if (cinfo->clkin < 32000000) |
| 871 | cinfo->highfreq = 0; |
| 872 | else |
| 873 | cinfo->highfreq = 1; |
| 874 | } |
| 875 | |
| 876 | cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1)); |
| 877 | |
| 878 | if (cinfo->fint > FINT_MAX || cinfo->fint < FINT_MIN) |
| 879 | return -EINVAL; |
| 880 | |
| 881 | cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint; |
| 882 | |
| 883 | if (cinfo->clkin4ddr > 1800 * 1000 * 1000) |
| 884 | return -EINVAL; |
| 885 | |
| 886 | if (cinfo->regm3 > 0) |
| 887 | cinfo->dsi1_pll_fclk = cinfo->clkin4ddr / cinfo->regm3; |
| 888 | else |
| 889 | cinfo->dsi1_pll_fclk = 0; |
| 890 | |
| 891 | if (cinfo->regm4 > 0) |
| 892 | cinfo->dsi2_pll_fclk = cinfo->clkin4ddr / cinfo->regm4; |
| 893 | else |
| 894 | cinfo->dsi2_pll_fclk = 0; |
| 895 | |
| 896 | return 0; |
| 897 | } |
| 898 | |
| 899 | int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, |
| 900 | struct dsi_clock_info *dsi_cinfo, |
| 901 | struct dispc_clock_info *dispc_cinfo) |
| 902 | { |
| 903 | struct dsi_clock_info cur, best; |
| 904 | struct dispc_clock_info best_dispc; |
| 905 | int min_fck_per_pck; |
| 906 | int match = 0; |
| 907 | unsigned long dss_clk_fck2; |
| 908 | |
| 909 | dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); |
| 910 | |
| 911 | if (req_pck == dsi.cache_req_pck && |
| 912 | dsi.cache_cinfo.clkin == dss_clk_fck2) { |
| 913 | DSSDBG("DSI clock info found from cache\n"); |
| 914 | *dsi_cinfo = dsi.cache_cinfo; |
| 915 | dispc_find_clk_divs(is_tft, req_pck, dsi_cinfo->dsi1_pll_fclk, |
| 916 | dispc_cinfo); |
| 917 | return 0; |
| 918 | } |
| 919 | |
| 920 | min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; |
| 921 | |
| 922 | if (min_fck_per_pck && |
| 923 | req_pck * min_fck_per_pck > DISPC_MAX_FCK) { |
| 924 | DSSERR("Requested pixel clock not possible with the current " |
| 925 | "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " |
| 926 | "the constraint off.\n"); |
| 927 | min_fck_per_pck = 0; |
| 928 | } |
| 929 | |
| 930 | DSSDBG("dsi_pll_calc\n"); |
| 931 | |
| 932 | retry: |
| 933 | memset(&best, 0, sizeof(best)); |
| 934 | memset(&best_dispc, 0, sizeof(best_dispc)); |
| 935 | |
| 936 | memset(&cur, 0, sizeof(cur)); |
| 937 | cur.clkin = dss_clk_fck2; |
| 938 | cur.use_dss2_fck = 1; |
| 939 | cur.highfreq = 0; |
| 940 | |
| 941 | /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ |
| 942 | /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ |
| 943 | /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ |
| 944 | for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { |
| 945 | if (cur.highfreq == 0) |
| 946 | cur.fint = cur.clkin / cur.regn; |
| 947 | else |
| 948 | cur.fint = cur.clkin / (2 * cur.regn); |
| 949 | |
| 950 | if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) |
| 951 | continue; |
| 952 | |
| 953 | /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ |
| 954 | for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { |
| 955 | unsigned long a, b; |
| 956 | |
| 957 | a = 2 * cur.regm * (cur.clkin/1000); |
| 958 | b = cur.regn * (cur.highfreq + 1); |
| 959 | cur.clkin4ddr = a / b * 1000; |
| 960 | |
| 961 | if (cur.clkin4ddr > 1800 * 1000 * 1000) |
| 962 | break; |
| 963 | |
| 964 | /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ |
| 965 | for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; |
| 966 | ++cur.regm3) { |
| 967 | struct dispc_clock_info cur_dispc; |
| 968 | cur.dsi1_pll_fclk = cur.clkin4ddr / cur.regm3; |
| 969 | |
| 970 | /* this will narrow down the search a bit, |
| 971 | * but still give pixclocks below what was |
| 972 | * requested */ |
| 973 | if (cur.dsi1_pll_fclk < req_pck) |
| 974 | break; |
| 975 | |
| 976 | if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) |
| 977 | continue; |
| 978 | |
| 979 | if (min_fck_per_pck && |
| 980 | cur.dsi1_pll_fclk < |
| 981 | req_pck * min_fck_per_pck) |
| 982 | continue; |
| 983 | |
| 984 | match = 1; |
| 985 | |
| 986 | dispc_find_clk_divs(is_tft, req_pck, |
| 987 | cur.dsi1_pll_fclk, |
| 988 | &cur_dispc); |
| 989 | |
| 990 | if (abs(cur_dispc.pck - req_pck) < |
| 991 | abs(best_dispc.pck - req_pck)) { |
| 992 | best = cur; |
| 993 | best_dispc = cur_dispc; |
| 994 | |
| 995 | if (cur_dispc.pck == req_pck) |
| 996 | goto found; |
| 997 | } |
| 998 | } |
| 999 | } |
| 1000 | } |
| 1001 | found: |
| 1002 | if (!match) { |
| 1003 | if (min_fck_per_pck) { |
| 1004 | DSSERR("Could not find suitable clock settings.\n" |
| 1005 | "Turning FCK/PCK constraint off and" |
| 1006 | "trying again.\n"); |
| 1007 | min_fck_per_pck = 0; |
| 1008 | goto retry; |
| 1009 | } |
| 1010 | |
| 1011 | DSSERR("Could not find suitable clock settings.\n"); |
| 1012 | |
| 1013 | return -EINVAL; |
| 1014 | } |
| 1015 | |
| 1016 | /* DSI2_PLL_FCLK (regm4) is not used */ |
| 1017 | best.regm4 = 0; |
| 1018 | best.dsi2_pll_fclk = 0; |
| 1019 | |
| 1020 | if (dsi_cinfo) |
| 1021 | *dsi_cinfo = best; |
| 1022 | if (dispc_cinfo) |
| 1023 | *dispc_cinfo = best_dispc; |
| 1024 | |
| 1025 | dsi.cache_req_pck = req_pck; |
| 1026 | dsi.cache_clk_freq = 0; |
| 1027 | dsi.cache_cinfo = best; |
| 1028 | |
| 1029 | return 0; |
| 1030 | } |
| 1031 | |
| 1032 | int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo) |
| 1033 | { |
| 1034 | int r = 0; |
| 1035 | u32 l; |
| 1036 | int f; |
| 1037 | |
| 1038 | DSSDBGF(); |
| 1039 | |
| 1040 | dsi.current_cinfo.fint = cinfo->fint; |
| 1041 | dsi.current_cinfo.clkin4ddr = cinfo->clkin4ddr; |
| 1042 | dsi.current_cinfo.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; |
| 1043 | dsi.current_cinfo.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; |
| 1044 | |
| 1045 | dsi.current_cinfo.regn = cinfo->regn; |
| 1046 | dsi.current_cinfo.regm = cinfo->regm; |
| 1047 | dsi.current_cinfo.regm3 = cinfo->regm3; |
| 1048 | dsi.current_cinfo.regm4 = cinfo->regm4; |
| 1049 | |
| 1050 | DSSDBG("DSI Fint %ld\n", cinfo->fint); |
| 1051 | |
| 1052 | DSSDBG("clkin (%s) rate %ld, highfreq %d\n", |
| 1053 | cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", |
| 1054 | cinfo->clkin, |
| 1055 | cinfo->highfreq); |
| 1056 | |
| 1057 | /* DSIPHY == CLKIN4DDR */ |
| 1058 | DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n", |
| 1059 | cinfo->regm, |
| 1060 | cinfo->regn, |
| 1061 | cinfo->clkin, |
| 1062 | cinfo->highfreq + 1, |
| 1063 | cinfo->clkin4ddr); |
| 1064 | |
| 1065 | DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", |
| 1066 | cinfo->clkin4ddr / 1000 / 1000 / 2); |
| 1067 | |
| 1068 | DSSDBG("Clock lane freq %ld Hz\n", cinfo->clkin4ddr / 4); |
| 1069 | |
| 1070 | DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", |
| 1071 | cinfo->regm3, cinfo->dsi1_pll_fclk); |
| 1072 | DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", |
| 1073 | cinfo->regm4, cinfo->dsi2_pll_fclk); |
| 1074 | |
| 1075 | REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ |
| 1076 | |
| 1077 | l = dsi_read_reg(DSI_PLL_CONFIGURATION1); |
| 1078 | l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ |
| 1079 | l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ |
| 1080 | l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ |
| 1081 | l = FLD_MOD(l, cinfo->regm3 > 0 ? cinfo->regm3 - 1 : 0, |
| 1082 | 22, 19); /* DSI_CLOCK_DIV */ |
| 1083 | l = FLD_MOD(l, cinfo->regm4 > 0 ? cinfo->regm4 - 1 : 0, |
| 1084 | 26, 23); /* DSIPROTO_CLOCK_DIV */ |
| 1085 | dsi_write_reg(DSI_PLL_CONFIGURATION1, l); |
| 1086 | |
| 1087 | BUG_ON(cinfo->fint < 750000 || cinfo->fint > 2100000); |
| 1088 | if (cinfo->fint < 1000000) |
| 1089 | f = 0x3; |
| 1090 | else if (cinfo->fint < 1250000) |
| 1091 | f = 0x4; |
| 1092 | else if (cinfo->fint < 1500000) |
| 1093 | f = 0x5; |
| 1094 | else if (cinfo->fint < 1750000) |
| 1095 | f = 0x6; |
| 1096 | else |
| 1097 | f = 0x7; |
| 1098 | |
| 1099 | l = dsi_read_reg(DSI_PLL_CONFIGURATION2); |
| 1100 | l = FLD_MOD(l, f, 4, 1); /* DSI_PLL_FREQSEL */ |
| 1101 | l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, |
| 1102 | 11, 11); /* DSI_PLL_CLKSEL */ |
| 1103 | l = FLD_MOD(l, cinfo->highfreq, |
| 1104 | 12, 12); /* DSI_PLL_HIGHFREQ */ |
| 1105 | l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ |
| 1106 | l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ |
| 1107 | l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ |
| 1108 | dsi_write_reg(DSI_PLL_CONFIGURATION2, l); |
| 1109 | |
| 1110 | REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ |
| 1111 | |
| 1112 | if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { |
| 1113 | DSSERR("dsi pll go bit not going down.\n"); |
| 1114 | r = -EIO; |
| 1115 | goto err; |
| 1116 | } |
| 1117 | |
| 1118 | if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { |
| 1119 | DSSERR("cannot lock PLL\n"); |
| 1120 | r = -EIO; |
| 1121 | goto err; |
| 1122 | } |
| 1123 | |
| 1124 | dsi.pll_locked = 1; |
| 1125 | |
| 1126 | l = dsi_read_reg(DSI_PLL_CONFIGURATION2); |
| 1127 | l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ |
| 1128 | l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ |
| 1129 | l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ |
| 1130 | l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ |
| 1131 | l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ |
| 1132 | l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ |
| 1133 | l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ |
| 1134 | l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ |
| 1135 | l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ |
| 1136 | l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ |
| 1137 | l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ |
| 1138 | l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ |
| 1139 | l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ |
| 1140 | l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ |
| 1141 | dsi_write_reg(DSI_PLL_CONFIGURATION2, l); |
| 1142 | |
| 1143 | DSSDBG("PLL config done\n"); |
| 1144 | err: |
| 1145 | return r; |
| 1146 | } |
| 1147 | |
| 1148 | int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, |
| 1149 | bool enable_hsdiv) |
| 1150 | { |
| 1151 | int r = 0; |
| 1152 | enum dsi_pll_power_state pwstate; |
| 1153 | |
| 1154 | DSSDBG("PLL init\n"); |
| 1155 | |
| 1156 | enable_clocks(1); |
| 1157 | dsi_enable_pll_clock(1); |
| 1158 | |
| 1159 | r = regulator_enable(dsi.vdds_dsi_reg); |
| 1160 | if (r) |
| 1161 | goto err0; |
| 1162 | |
| 1163 | /* XXX PLL does not come out of reset without this... */ |
| 1164 | dispc_pck_free_enable(1); |
| 1165 | |
| 1166 | if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { |
| 1167 | DSSERR("PLL not coming out of reset.\n"); |
| 1168 | r = -ENODEV; |
| 1169 | goto err1; |
| 1170 | } |
| 1171 | |
| 1172 | /* XXX ... but if left on, we get problems when planes do not |
| 1173 | * fill the whole display. No idea about this */ |
| 1174 | dispc_pck_free_enable(0); |
| 1175 | |
| 1176 | if (enable_hsclk && enable_hsdiv) |
| 1177 | pwstate = DSI_PLL_POWER_ON_ALL; |
| 1178 | else if (enable_hsclk) |
| 1179 | pwstate = DSI_PLL_POWER_ON_HSCLK; |
| 1180 | else if (enable_hsdiv) |
| 1181 | pwstate = DSI_PLL_POWER_ON_DIV; |
| 1182 | else |
| 1183 | pwstate = DSI_PLL_POWER_OFF; |
| 1184 | |
| 1185 | r = dsi_pll_power(pwstate); |
| 1186 | |
| 1187 | if (r) |
| 1188 | goto err1; |
| 1189 | |
| 1190 | DSSDBG("PLL init done\n"); |
| 1191 | |
| 1192 | return 0; |
| 1193 | err1: |
| 1194 | regulator_disable(dsi.vdds_dsi_reg); |
| 1195 | err0: |
| 1196 | enable_clocks(0); |
| 1197 | dsi_enable_pll_clock(0); |
| 1198 | return r; |
| 1199 | } |
| 1200 | |
| 1201 | void dsi_pll_uninit(void) |
| 1202 | { |
| 1203 | enable_clocks(0); |
| 1204 | dsi_enable_pll_clock(0); |
| 1205 | |
| 1206 | dsi.pll_locked = 0; |
| 1207 | dsi_pll_power(DSI_PLL_POWER_OFF); |
| 1208 | regulator_disable(dsi.vdds_dsi_reg); |
| 1209 | DSSDBG("PLL uninit done\n"); |
| 1210 | } |
| 1211 | |
| 1212 | void dsi_dump_clocks(struct seq_file *s) |
| 1213 | { |
| 1214 | int clksel; |
| 1215 | struct dsi_clock_info *cinfo = &dsi.current_cinfo; |
| 1216 | |
| 1217 | enable_clocks(1); |
| 1218 | |
| 1219 | clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); |
| 1220 | |
| 1221 | seq_printf(s, "- DSI PLL -\n"); |
| 1222 | |
| 1223 | seq_printf(s, "dsi pll source = %s\n", |
| 1224 | clksel == 0 ? |
| 1225 | "dss2_alwon_fclk" : "pclkfree"); |
| 1226 | |
| 1227 | seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn); |
| 1228 | |
| 1229 | seq_printf(s, "CLKIN4DDR\t%-16luregm %u\n", |
| 1230 | cinfo->clkin4ddr, cinfo->regm); |
| 1231 | |
| 1232 | seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n", |
| 1233 | cinfo->dsi1_pll_fclk, |
| 1234 | cinfo->regm3, |
| 1235 | dss_get_dispc_clk_source() == 0 ? "off" : "on"); |
| 1236 | |
| 1237 | seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n", |
| 1238 | cinfo->dsi2_pll_fclk, |
| 1239 | cinfo->regm4, |
| 1240 | dss_get_dsi_clk_source() == 0 ? "off" : "on"); |
| 1241 | |
| 1242 | seq_printf(s, "- DSI -\n"); |
| 1243 | |
| 1244 | seq_printf(s, "dsi fclk source = %s\n", |
| 1245 | dss_get_dsi_clk_source() == 0 ? |
| 1246 | "dss1_alwon_fclk" : "dsi2_pll_fclk"); |
| 1247 | |
| 1248 | seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate()); |
| 1249 | |
| 1250 | seq_printf(s, "DDR_CLK\t\t%lu\n", |
| 1251 | cinfo->clkin4ddr / 4); |
| 1252 | |
| 1253 | seq_printf(s, "TxByteClkHS\t%lu\n", dsi_get_txbyteclkhs()); |
| 1254 | |
| 1255 | seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk); |
| 1256 | |
| 1257 | seq_printf(s, "VP_CLK\t\t%lu\n" |
| 1258 | "VP_PCLK\t\t%lu\n", |
| 1259 | dispc_lclk_rate(), |
| 1260 | dispc_pclk_rate()); |
| 1261 | |
| 1262 | enable_clocks(0); |
| 1263 | } |
| 1264 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 1265 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 1266 | void dsi_dump_irqs(struct seq_file *s) |
| 1267 | { |
| 1268 | unsigned long flags; |
| 1269 | struct dsi_irq_stats stats; |
| 1270 | |
| 1271 | spin_lock_irqsave(&dsi.irq_stats_lock, flags); |
| 1272 | |
| 1273 | stats = dsi.irq_stats; |
| 1274 | memset(&dsi.irq_stats, 0, sizeof(dsi.irq_stats)); |
| 1275 | dsi.irq_stats.last_reset = jiffies; |
| 1276 | |
| 1277 | spin_unlock_irqrestore(&dsi.irq_stats_lock, flags); |
| 1278 | |
| 1279 | seq_printf(s, "period %u ms\n", |
| 1280 | jiffies_to_msecs(jiffies - stats.last_reset)); |
| 1281 | |
| 1282 | seq_printf(s, "irqs %d\n", stats.irq_count); |
| 1283 | #define PIS(x) \ |
| 1284 | seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]); |
| 1285 | |
| 1286 | seq_printf(s, "-- DSI interrupts --\n"); |
| 1287 | PIS(VC0); |
| 1288 | PIS(VC1); |
| 1289 | PIS(VC2); |
| 1290 | PIS(VC3); |
| 1291 | PIS(WAKEUP); |
| 1292 | PIS(RESYNC); |
| 1293 | PIS(PLL_LOCK); |
| 1294 | PIS(PLL_UNLOCK); |
| 1295 | PIS(PLL_RECALL); |
| 1296 | PIS(COMPLEXIO_ERR); |
| 1297 | PIS(HS_TX_TIMEOUT); |
| 1298 | PIS(LP_RX_TIMEOUT); |
| 1299 | PIS(TE_TRIGGER); |
| 1300 | PIS(ACK_TRIGGER); |
| 1301 | PIS(SYNC_LOST); |
| 1302 | PIS(LDO_POWER_GOOD); |
| 1303 | PIS(TA_TIMEOUT); |
| 1304 | #undef PIS |
| 1305 | |
| 1306 | #define PIS(x) \ |
| 1307 | seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \ |
| 1308 | stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \ |
| 1309 | stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \ |
| 1310 | stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \ |
| 1311 | stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]); |
| 1312 | |
| 1313 | seq_printf(s, "-- VC interrupts --\n"); |
| 1314 | PIS(CS); |
| 1315 | PIS(ECC_CORR); |
| 1316 | PIS(PACKET_SENT); |
| 1317 | PIS(FIFO_TX_OVF); |
| 1318 | PIS(FIFO_RX_OVF); |
| 1319 | PIS(BTA); |
| 1320 | PIS(ECC_NO_CORR); |
| 1321 | PIS(FIFO_TX_UDF); |
| 1322 | PIS(PP_BUSY_CHANGE); |
| 1323 | #undef PIS |
| 1324 | |
| 1325 | #define PIS(x) \ |
| 1326 | seq_printf(s, "%-20s %10d\n", #x, \ |
| 1327 | stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]); |
| 1328 | |
| 1329 | seq_printf(s, "-- CIO interrupts --\n"); |
| 1330 | PIS(ERRSYNCESC1); |
| 1331 | PIS(ERRSYNCESC2); |
| 1332 | PIS(ERRSYNCESC3); |
| 1333 | PIS(ERRESC1); |
| 1334 | PIS(ERRESC2); |
| 1335 | PIS(ERRESC3); |
| 1336 | PIS(ERRCONTROL1); |
| 1337 | PIS(ERRCONTROL2); |
| 1338 | PIS(ERRCONTROL3); |
| 1339 | PIS(STATEULPS1); |
| 1340 | PIS(STATEULPS2); |
| 1341 | PIS(STATEULPS3); |
| 1342 | PIS(ERRCONTENTIONLP0_1); |
| 1343 | PIS(ERRCONTENTIONLP1_1); |
| 1344 | PIS(ERRCONTENTIONLP0_2); |
| 1345 | PIS(ERRCONTENTIONLP1_2); |
| 1346 | PIS(ERRCONTENTIONLP0_3); |
| 1347 | PIS(ERRCONTENTIONLP1_3); |
| 1348 | PIS(ULPSACTIVENOT_ALL0); |
| 1349 | PIS(ULPSACTIVENOT_ALL1); |
| 1350 | #undef PIS |
| 1351 | } |
| 1352 | #endif |
| 1353 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1354 | void dsi_dump_regs(struct seq_file *s) |
| 1355 | { |
| 1356 | #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) |
| 1357 | |
| 1358 | dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| 1359 | |
| 1360 | DUMPREG(DSI_REVISION); |
| 1361 | DUMPREG(DSI_SYSCONFIG); |
| 1362 | DUMPREG(DSI_SYSSTATUS); |
| 1363 | DUMPREG(DSI_IRQSTATUS); |
| 1364 | DUMPREG(DSI_IRQENABLE); |
| 1365 | DUMPREG(DSI_CTRL); |
| 1366 | DUMPREG(DSI_COMPLEXIO_CFG1); |
| 1367 | DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); |
| 1368 | DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); |
| 1369 | DUMPREG(DSI_CLK_CTRL); |
| 1370 | DUMPREG(DSI_TIMING1); |
| 1371 | DUMPREG(DSI_TIMING2); |
| 1372 | DUMPREG(DSI_VM_TIMING1); |
| 1373 | DUMPREG(DSI_VM_TIMING2); |
| 1374 | DUMPREG(DSI_VM_TIMING3); |
| 1375 | DUMPREG(DSI_CLK_TIMING); |
| 1376 | DUMPREG(DSI_TX_FIFO_VC_SIZE); |
| 1377 | DUMPREG(DSI_RX_FIFO_VC_SIZE); |
| 1378 | DUMPREG(DSI_COMPLEXIO_CFG2); |
| 1379 | DUMPREG(DSI_RX_FIFO_VC_FULLNESS); |
| 1380 | DUMPREG(DSI_VM_TIMING4); |
| 1381 | DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); |
| 1382 | DUMPREG(DSI_VM_TIMING5); |
| 1383 | DUMPREG(DSI_VM_TIMING6); |
| 1384 | DUMPREG(DSI_VM_TIMING7); |
| 1385 | DUMPREG(DSI_STOPCLK_TIMING); |
| 1386 | |
| 1387 | DUMPREG(DSI_VC_CTRL(0)); |
| 1388 | DUMPREG(DSI_VC_TE(0)); |
| 1389 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); |
| 1390 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); |
| 1391 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); |
| 1392 | DUMPREG(DSI_VC_IRQSTATUS(0)); |
| 1393 | DUMPREG(DSI_VC_IRQENABLE(0)); |
| 1394 | |
| 1395 | DUMPREG(DSI_VC_CTRL(1)); |
| 1396 | DUMPREG(DSI_VC_TE(1)); |
| 1397 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); |
| 1398 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); |
| 1399 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); |
| 1400 | DUMPREG(DSI_VC_IRQSTATUS(1)); |
| 1401 | DUMPREG(DSI_VC_IRQENABLE(1)); |
| 1402 | |
| 1403 | DUMPREG(DSI_VC_CTRL(2)); |
| 1404 | DUMPREG(DSI_VC_TE(2)); |
| 1405 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); |
| 1406 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); |
| 1407 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); |
| 1408 | DUMPREG(DSI_VC_IRQSTATUS(2)); |
| 1409 | DUMPREG(DSI_VC_IRQENABLE(2)); |
| 1410 | |
| 1411 | DUMPREG(DSI_VC_CTRL(3)); |
| 1412 | DUMPREG(DSI_VC_TE(3)); |
| 1413 | DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); |
| 1414 | DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); |
| 1415 | DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); |
| 1416 | DUMPREG(DSI_VC_IRQSTATUS(3)); |
| 1417 | DUMPREG(DSI_VC_IRQENABLE(3)); |
| 1418 | |
| 1419 | DUMPREG(DSI_DSIPHY_CFG0); |
| 1420 | DUMPREG(DSI_DSIPHY_CFG1); |
| 1421 | DUMPREG(DSI_DSIPHY_CFG2); |
| 1422 | DUMPREG(DSI_DSIPHY_CFG5); |
| 1423 | |
| 1424 | DUMPREG(DSI_PLL_CONTROL); |
| 1425 | DUMPREG(DSI_PLL_STATUS); |
| 1426 | DUMPREG(DSI_PLL_GO); |
| 1427 | DUMPREG(DSI_PLL_CONFIGURATION1); |
| 1428 | DUMPREG(DSI_PLL_CONFIGURATION2); |
| 1429 | |
| 1430 | dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| 1431 | #undef DUMPREG |
| 1432 | } |
| 1433 | |
| 1434 | enum dsi_complexio_power_state { |
| 1435 | DSI_COMPLEXIO_POWER_OFF = 0x0, |
| 1436 | DSI_COMPLEXIO_POWER_ON = 0x1, |
| 1437 | DSI_COMPLEXIO_POWER_ULPS = 0x2, |
| 1438 | }; |
| 1439 | |
| 1440 | static int dsi_complexio_power(enum dsi_complexio_power_state state) |
| 1441 | { |
| 1442 | int t = 0; |
| 1443 | |
| 1444 | /* PWR_CMD */ |
| 1445 | REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); |
| 1446 | |
| 1447 | /* PWR_STATUS */ |
| 1448 | while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 1449 | if (++t > 1000) { |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1450 | DSSERR("failed to set complexio power state to " |
| 1451 | "%d\n", state); |
| 1452 | return -ENODEV; |
| 1453 | } |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 1454 | udelay(1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1455 | } |
| 1456 | |
| 1457 | return 0; |
| 1458 | } |
| 1459 | |
| 1460 | static void dsi_complexio_config(struct omap_dss_device *dssdev) |
| 1461 | { |
| 1462 | u32 r; |
| 1463 | |
| 1464 | int clk_lane = dssdev->phy.dsi.clk_lane; |
| 1465 | int data1_lane = dssdev->phy.dsi.data1_lane; |
| 1466 | int data2_lane = dssdev->phy.dsi.data2_lane; |
| 1467 | int clk_pol = dssdev->phy.dsi.clk_pol; |
| 1468 | int data1_pol = dssdev->phy.dsi.data1_pol; |
| 1469 | int data2_pol = dssdev->phy.dsi.data2_pol; |
| 1470 | |
| 1471 | r = dsi_read_reg(DSI_COMPLEXIO_CFG1); |
| 1472 | r = FLD_MOD(r, clk_lane, 2, 0); |
| 1473 | r = FLD_MOD(r, clk_pol, 3, 3); |
| 1474 | r = FLD_MOD(r, data1_lane, 6, 4); |
| 1475 | r = FLD_MOD(r, data1_pol, 7, 7); |
| 1476 | r = FLD_MOD(r, data2_lane, 10, 8); |
| 1477 | r = FLD_MOD(r, data2_pol, 11, 11); |
| 1478 | dsi_write_reg(DSI_COMPLEXIO_CFG1, r); |
| 1479 | |
| 1480 | /* The configuration of the DSI complex I/O (number of data lanes, |
| 1481 | position, differential order) should not be changed while |
| 1482 | DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for |
| 1483 | the hardware to take into account a new configuration of the complex |
| 1484 | I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to |
| 1485 | follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, |
| 1486 | then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set |
| 1487 | DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the |
| 1488 | DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the |
| 1489 | DSI complex I/O configuration is unknown. */ |
| 1490 | |
| 1491 | /* |
| 1492 | REG_FLD_MOD(DSI_CTRL, 1, 0, 0); |
| 1493 | REG_FLD_MOD(DSI_CTRL, 0, 0, 0); |
| 1494 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); |
| 1495 | REG_FLD_MOD(DSI_CTRL, 1, 0, 0); |
| 1496 | */ |
| 1497 | } |
| 1498 | |
| 1499 | static inline unsigned ns2ddr(unsigned ns) |
| 1500 | { |
| 1501 | /* convert time in ns to ddr ticks, rounding up */ |
| 1502 | unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; |
| 1503 | return (ns * (ddr_clk / 1000 / 1000) + 999) / 1000; |
| 1504 | } |
| 1505 | |
| 1506 | static inline unsigned ddr2ns(unsigned ddr) |
| 1507 | { |
| 1508 | unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; |
| 1509 | return ddr * 1000 * 1000 / (ddr_clk / 1000); |
| 1510 | } |
| 1511 | |
| 1512 | static void dsi_complexio_timings(void) |
| 1513 | { |
| 1514 | u32 r; |
| 1515 | u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; |
| 1516 | u32 tlpx_half, tclk_trail, tclk_zero; |
| 1517 | u32 tclk_prepare; |
| 1518 | |
| 1519 | /* calculate timings */ |
| 1520 | |
| 1521 | /* 1 * DDR_CLK = 2 * UI */ |
| 1522 | |
| 1523 | /* min 40ns + 4*UI max 85ns + 6*UI */ |
| 1524 | ths_prepare = ns2ddr(70) + 2; |
| 1525 | |
| 1526 | /* min 145ns + 10*UI */ |
| 1527 | ths_prepare_ths_zero = ns2ddr(175) + 2; |
| 1528 | |
| 1529 | /* min max(8*UI, 60ns+4*UI) */ |
| 1530 | ths_trail = ns2ddr(60) + 5; |
| 1531 | |
| 1532 | /* min 100ns */ |
| 1533 | ths_exit = ns2ddr(145); |
| 1534 | |
| 1535 | /* tlpx min 50n */ |
| 1536 | tlpx_half = ns2ddr(25); |
| 1537 | |
| 1538 | /* min 60ns */ |
| 1539 | tclk_trail = ns2ddr(60) + 2; |
| 1540 | |
| 1541 | /* min 38ns, max 95ns */ |
| 1542 | tclk_prepare = ns2ddr(65); |
| 1543 | |
| 1544 | /* min tclk-prepare + tclk-zero = 300ns */ |
| 1545 | tclk_zero = ns2ddr(260); |
| 1546 | |
| 1547 | DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", |
| 1548 | ths_prepare, ddr2ns(ths_prepare), |
| 1549 | ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); |
| 1550 | DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", |
| 1551 | ths_trail, ddr2ns(ths_trail), |
| 1552 | ths_exit, ddr2ns(ths_exit)); |
| 1553 | |
| 1554 | DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " |
| 1555 | "tclk_zero %u (%uns)\n", |
| 1556 | tlpx_half, ddr2ns(tlpx_half), |
| 1557 | tclk_trail, ddr2ns(tclk_trail), |
| 1558 | tclk_zero, ddr2ns(tclk_zero)); |
| 1559 | DSSDBG("tclk_prepare %u (%uns)\n", |
| 1560 | tclk_prepare, ddr2ns(tclk_prepare)); |
| 1561 | |
| 1562 | /* program timings */ |
| 1563 | |
| 1564 | r = dsi_read_reg(DSI_DSIPHY_CFG0); |
| 1565 | r = FLD_MOD(r, ths_prepare, 31, 24); |
| 1566 | r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); |
| 1567 | r = FLD_MOD(r, ths_trail, 15, 8); |
| 1568 | r = FLD_MOD(r, ths_exit, 7, 0); |
| 1569 | dsi_write_reg(DSI_DSIPHY_CFG0, r); |
| 1570 | |
| 1571 | r = dsi_read_reg(DSI_DSIPHY_CFG1); |
| 1572 | r = FLD_MOD(r, tlpx_half, 22, 16); |
| 1573 | r = FLD_MOD(r, tclk_trail, 15, 8); |
| 1574 | r = FLD_MOD(r, tclk_zero, 7, 0); |
| 1575 | dsi_write_reg(DSI_DSIPHY_CFG1, r); |
| 1576 | |
| 1577 | r = dsi_read_reg(DSI_DSIPHY_CFG2); |
| 1578 | r = FLD_MOD(r, tclk_prepare, 7, 0); |
| 1579 | dsi_write_reg(DSI_DSIPHY_CFG2, r); |
| 1580 | } |
| 1581 | |
| 1582 | |
| 1583 | static int dsi_complexio_init(struct omap_dss_device *dssdev) |
| 1584 | { |
| 1585 | int r = 0; |
| 1586 | |
| 1587 | DSSDBG("dsi_complexio_init\n"); |
| 1588 | |
| 1589 | /* CIO_CLK_ICG, enable L3 clk to CIO */ |
| 1590 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); |
| 1591 | |
| 1592 | /* A dummy read using the SCP interface to any DSIPHY register is |
| 1593 | * required after DSIPHY reset to complete the reset of the DSI complex |
| 1594 | * I/O. */ |
| 1595 | dsi_read_reg(DSI_DSIPHY_CFG5); |
| 1596 | |
| 1597 | if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { |
| 1598 | DSSERR("ComplexIO PHY not coming out of reset.\n"); |
| 1599 | r = -ENODEV; |
| 1600 | goto err; |
| 1601 | } |
| 1602 | |
| 1603 | dsi_complexio_config(dssdev); |
| 1604 | |
| 1605 | r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); |
| 1606 | |
| 1607 | if (r) |
| 1608 | goto err; |
| 1609 | |
| 1610 | if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { |
| 1611 | DSSERR("ComplexIO not coming out of reset.\n"); |
| 1612 | r = -ENODEV; |
| 1613 | goto err; |
| 1614 | } |
| 1615 | |
| 1616 | if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { |
| 1617 | DSSERR("ComplexIO LDO power down.\n"); |
| 1618 | r = -ENODEV; |
| 1619 | goto err; |
| 1620 | } |
| 1621 | |
| 1622 | dsi_complexio_timings(); |
| 1623 | |
| 1624 | /* |
| 1625 | The configuration of the DSI complex I/O (number of data lanes, |
| 1626 | position, differential order) should not be changed while |
| 1627 | DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the |
| 1628 | hardware to recognize a new configuration of the complex I/O (done |
| 1629 | in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow |
| 1630 | this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next |
| 1631 | reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] |
| 1632 | LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN |
| 1633 | bit to 1. If the sequence is not followed, the DSi complex I/O |
| 1634 | configuration is undetermined. |
| 1635 | */ |
| 1636 | dsi_if_enable(1); |
| 1637 | dsi_if_enable(0); |
| 1638 | REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ |
| 1639 | dsi_if_enable(1); |
| 1640 | dsi_if_enable(0); |
| 1641 | |
| 1642 | DSSDBG("CIO init done\n"); |
| 1643 | err: |
| 1644 | return r; |
| 1645 | } |
| 1646 | |
| 1647 | static void dsi_complexio_uninit(void) |
| 1648 | { |
| 1649 | dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); |
| 1650 | } |
| 1651 | |
| 1652 | static int _dsi_wait_reset(void) |
| 1653 | { |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 1654 | int t = 0; |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1655 | |
| 1656 | while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 1657 | if (++t > 5) { |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1658 | DSSERR("soft reset failed\n"); |
| 1659 | return -ENODEV; |
| 1660 | } |
| 1661 | udelay(1); |
| 1662 | } |
| 1663 | |
| 1664 | return 0; |
| 1665 | } |
| 1666 | |
| 1667 | static int _dsi_reset(void) |
| 1668 | { |
| 1669 | /* Soft reset */ |
| 1670 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); |
| 1671 | return _dsi_wait_reset(); |
| 1672 | } |
| 1673 | |
| 1674 | static void dsi_reset_tx_fifo(int channel) |
| 1675 | { |
| 1676 | u32 mask; |
| 1677 | u32 l; |
| 1678 | |
| 1679 | /* set fifosize of the channel to 0, then return the old size */ |
| 1680 | l = dsi_read_reg(DSI_TX_FIFO_VC_SIZE); |
| 1681 | |
| 1682 | mask = FLD_MASK((8 * channel) + 7, (8 * channel) + 4); |
| 1683 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l & ~mask); |
| 1684 | |
| 1685 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l); |
| 1686 | } |
| 1687 | |
| 1688 | static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, |
| 1689 | enum fifo_size size3, enum fifo_size size4) |
| 1690 | { |
| 1691 | u32 r = 0; |
| 1692 | int add = 0; |
| 1693 | int i; |
| 1694 | |
| 1695 | dsi.vc[0].fifo_size = size1; |
| 1696 | dsi.vc[1].fifo_size = size2; |
| 1697 | dsi.vc[2].fifo_size = size3; |
| 1698 | dsi.vc[3].fifo_size = size4; |
| 1699 | |
| 1700 | for (i = 0; i < 4; i++) { |
| 1701 | u8 v; |
| 1702 | int size = dsi.vc[i].fifo_size; |
| 1703 | |
| 1704 | if (add + size > 4) { |
| 1705 | DSSERR("Illegal FIFO configuration\n"); |
| 1706 | BUG(); |
| 1707 | } |
| 1708 | |
| 1709 | v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); |
| 1710 | r |= v << (8 * i); |
| 1711 | /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ |
| 1712 | add += size; |
| 1713 | } |
| 1714 | |
| 1715 | dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); |
| 1716 | } |
| 1717 | |
| 1718 | static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, |
| 1719 | enum fifo_size size3, enum fifo_size size4) |
| 1720 | { |
| 1721 | u32 r = 0; |
| 1722 | int add = 0; |
| 1723 | int i; |
| 1724 | |
| 1725 | dsi.vc[0].fifo_size = size1; |
| 1726 | dsi.vc[1].fifo_size = size2; |
| 1727 | dsi.vc[2].fifo_size = size3; |
| 1728 | dsi.vc[3].fifo_size = size4; |
| 1729 | |
| 1730 | for (i = 0; i < 4; i++) { |
| 1731 | u8 v; |
| 1732 | int size = dsi.vc[i].fifo_size; |
| 1733 | |
| 1734 | if (add + size > 4) { |
| 1735 | DSSERR("Illegal FIFO configuration\n"); |
| 1736 | BUG(); |
| 1737 | } |
| 1738 | |
| 1739 | v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); |
| 1740 | r |= v << (8 * i); |
| 1741 | /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ |
| 1742 | add += size; |
| 1743 | } |
| 1744 | |
| 1745 | dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); |
| 1746 | } |
| 1747 | |
| 1748 | static int dsi_force_tx_stop_mode_io(void) |
| 1749 | { |
| 1750 | u32 r; |
| 1751 | |
| 1752 | r = dsi_read_reg(DSI_TIMING1); |
| 1753 | r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ |
| 1754 | dsi_write_reg(DSI_TIMING1, r); |
| 1755 | |
| 1756 | if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { |
| 1757 | DSSERR("TX_STOP bit not going down\n"); |
| 1758 | return -EIO; |
| 1759 | } |
| 1760 | |
| 1761 | return 0; |
| 1762 | } |
| 1763 | |
| 1764 | static void dsi_vc_print_status(int channel) |
| 1765 | { |
| 1766 | u32 r; |
| 1767 | |
| 1768 | r = dsi_read_reg(DSI_VC_CTRL(channel)); |
| 1769 | DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " |
| 1770 | "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", |
| 1771 | channel, |
| 1772 | FLD_GET(r, 5, 5), |
| 1773 | FLD_GET(r, 6, 6), |
| 1774 | FLD_GET(r, 15, 15), |
| 1775 | FLD_GET(r, 16, 16), |
| 1776 | FLD_GET(r, 20, 20)); |
| 1777 | |
| 1778 | r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); |
| 1779 | DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); |
| 1780 | } |
| 1781 | |
| 1782 | static int dsi_vc_enable(int channel, bool enable) |
| 1783 | { |
| 1784 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) |
| 1785 | DSSDBG("dsi_vc_enable channel %d, enable %d\n", |
| 1786 | channel, enable); |
| 1787 | |
| 1788 | enable = enable ? 1 : 0; |
| 1789 | |
| 1790 | REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); |
| 1791 | |
| 1792 | if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { |
| 1793 | DSSERR("Failed to set dsi_vc_enable to %d\n", enable); |
| 1794 | return -EIO; |
| 1795 | } |
| 1796 | |
| 1797 | return 0; |
| 1798 | } |
| 1799 | |
| 1800 | static void dsi_vc_initial_config(int channel) |
| 1801 | { |
| 1802 | u32 r; |
| 1803 | |
| 1804 | DSSDBGF("%d", channel); |
| 1805 | |
| 1806 | r = dsi_read_reg(DSI_VC_CTRL(channel)); |
| 1807 | |
| 1808 | if (FLD_GET(r, 15, 15)) /* VC_BUSY */ |
| 1809 | DSSERR("VC(%d) busy when trying to configure it!\n", |
| 1810 | channel); |
| 1811 | |
| 1812 | r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ |
| 1813 | r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ |
| 1814 | r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ |
| 1815 | r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ |
| 1816 | r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ |
| 1817 | r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ |
| 1818 | r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ |
| 1819 | |
| 1820 | r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ |
| 1821 | r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ |
| 1822 | |
| 1823 | dsi_write_reg(DSI_VC_CTRL(channel), r); |
| 1824 | |
| 1825 | dsi.vc[channel].mode = DSI_VC_MODE_L4; |
| 1826 | } |
| 1827 | |
| 1828 | static void dsi_vc_config_l4(int channel) |
| 1829 | { |
| 1830 | if (dsi.vc[channel].mode == DSI_VC_MODE_L4) |
| 1831 | return; |
| 1832 | |
| 1833 | DSSDBGF("%d", channel); |
| 1834 | |
| 1835 | dsi_vc_enable(channel, 0); |
| 1836 | |
| 1837 | if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ |
| 1838 | DSSERR("vc(%d) busy when trying to config for L4\n", channel); |
| 1839 | |
| 1840 | REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ |
| 1841 | |
| 1842 | dsi_vc_enable(channel, 1); |
| 1843 | |
| 1844 | dsi.vc[channel].mode = DSI_VC_MODE_L4; |
| 1845 | } |
| 1846 | |
| 1847 | static void dsi_vc_config_vp(int channel) |
| 1848 | { |
| 1849 | if (dsi.vc[channel].mode == DSI_VC_MODE_VP) |
| 1850 | return; |
| 1851 | |
| 1852 | DSSDBGF("%d", channel); |
| 1853 | |
| 1854 | dsi_vc_enable(channel, 0); |
| 1855 | |
| 1856 | if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ |
| 1857 | DSSERR("vc(%d) busy when trying to config for VP\n", channel); |
| 1858 | |
| 1859 | REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ |
| 1860 | |
| 1861 | dsi_vc_enable(channel, 1); |
| 1862 | |
| 1863 | dsi.vc[channel].mode = DSI_VC_MODE_VP; |
| 1864 | } |
| 1865 | |
| 1866 | |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 1867 | void omapdss_dsi_vc_enable_hs(int channel, bool enable) |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1868 | { |
| 1869 | DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); |
| 1870 | |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 1871 | WARN_ON(!dsi_bus_is_locked()); |
| 1872 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1873 | dsi_vc_enable(channel, 0); |
| 1874 | dsi_if_enable(0); |
| 1875 | |
| 1876 | REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); |
| 1877 | |
| 1878 | dsi_vc_enable(channel, 1); |
| 1879 | dsi_if_enable(1); |
| 1880 | |
| 1881 | dsi_force_tx_stop_mode_io(); |
| 1882 | } |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 1883 | EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1884 | |
| 1885 | static void dsi_vc_flush_long_data(int channel) |
| 1886 | { |
| 1887 | while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| 1888 | u32 val; |
| 1889 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| 1890 | DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", |
| 1891 | (val >> 0) & 0xff, |
| 1892 | (val >> 8) & 0xff, |
| 1893 | (val >> 16) & 0xff, |
| 1894 | (val >> 24) & 0xff); |
| 1895 | } |
| 1896 | } |
| 1897 | |
| 1898 | static void dsi_show_rx_ack_with_err(u16 err) |
| 1899 | { |
| 1900 | DSSERR("\tACK with ERROR (%#x):\n", err); |
| 1901 | if (err & (1 << 0)) |
| 1902 | DSSERR("\t\tSoT Error\n"); |
| 1903 | if (err & (1 << 1)) |
| 1904 | DSSERR("\t\tSoT Sync Error\n"); |
| 1905 | if (err & (1 << 2)) |
| 1906 | DSSERR("\t\tEoT Sync Error\n"); |
| 1907 | if (err & (1 << 3)) |
| 1908 | DSSERR("\t\tEscape Mode Entry Command Error\n"); |
| 1909 | if (err & (1 << 4)) |
| 1910 | DSSERR("\t\tLP Transmit Sync Error\n"); |
| 1911 | if (err & (1 << 5)) |
| 1912 | DSSERR("\t\tHS Receive Timeout Error\n"); |
| 1913 | if (err & (1 << 6)) |
| 1914 | DSSERR("\t\tFalse Control Error\n"); |
| 1915 | if (err & (1 << 7)) |
| 1916 | DSSERR("\t\t(reserved7)\n"); |
| 1917 | if (err & (1 << 8)) |
| 1918 | DSSERR("\t\tECC Error, single-bit (corrected)\n"); |
| 1919 | if (err & (1 << 9)) |
| 1920 | DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); |
| 1921 | if (err & (1 << 10)) |
| 1922 | DSSERR("\t\tChecksum Error\n"); |
| 1923 | if (err & (1 << 11)) |
| 1924 | DSSERR("\t\tData type not recognized\n"); |
| 1925 | if (err & (1 << 12)) |
| 1926 | DSSERR("\t\tInvalid VC ID\n"); |
| 1927 | if (err & (1 << 13)) |
| 1928 | DSSERR("\t\tInvalid Transmission Length\n"); |
| 1929 | if (err & (1 << 14)) |
| 1930 | DSSERR("\t\t(reserved14)\n"); |
| 1931 | if (err & (1 << 15)) |
| 1932 | DSSERR("\t\tDSI Protocol Violation\n"); |
| 1933 | } |
| 1934 | |
| 1935 | static u16 dsi_vc_flush_receive_data(int channel) |
| 1936 | { |
| 1937 | /* RX_FIFO_NOT_EMPTY */ |
| 1938 | while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| 1939 | u32 val; |
| 1940 | u8 dt; |
| 1941 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| 1942 | DSSDBG("\trawval %#08x\n", val); |
| 1943 | dt = FLD_GET(val, 5, 0); |
| 1944 | if (dt == DSI_DT_RX_ACK_WITH_ERR) { |
| 1945 | u16 err = FLD_GET(val, 23, 8); |
| 1946 | dsi_show_rx_ack_with_err(err); |
| 1947 | } else if (dt == DSI_DT_RX_SHORT_READ_1) { |
| 1948 | DSSDBG("\tDCS short response, 1 byte: %#x\n", |
| 1949 | FLD_GET(val, 23, 8)); |
| 1950 | } else if (dt == DSI_DT_RX_SHORT_READ_2) { |
| 1951 | DSSDBG("\tDCS short response, 2 byte: %#x\n", |
| 1952 | FLD_GET(val, 23, 8)); |
| 1953 | } else if (dt == DSI_DT_RX_DCS_LONG_READ) { |
| 1954 | DSSDBG("\tDCS long response, len %d\n", |
| 1955 | FLD_GET(val, 23, 8)); |
| 1956 | dsi_vc_flush_long_data(channel); |
| 1957 | } else { |
| 1958 | DSSERR("\tunknown datatype 0x%02x\n", dt); |
| 1959 | } |
| 1960 | } |
| 1961 | return 0; |
| 1962 | } |
| 1963 | |
| 1964 | static int dsi_vc_send_bta(int channel) |
| 1965 | { |
| 1966 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO && |
| 1967 | (dsi.debug_write || dsi.debug_read)) |
| 1968 | DSSDBG("dsi_vc_send_bta %d\n", channel); |
| 1969 | |
Tomi Valkeinen | 4f76502 | 2010-01-18 16:27:52 +0200 | [diff] [blame] | 1970 | WARN_ON(!dsi_bus_is_locked()); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 1971 | |
| 1972 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ |
| 1973 | DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); |
| 1974 | dsi_vc_flush_receive_data(channel); |
| 1975 | } |
| 1976 | |
| 1977 | REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ |
| 1978 | |
| 1979 | return 0; |
| 1980 | } |
| 1981 | |
| 1982 | int dsi_vc_send_bta_sync(int channel) |
| 1983 | { |
| 1984 | int r = 0; |
| 1985 | u32 err; |
| 1986 | |
| 1987 | INIT_COMPLETION(dsi.bta_completion); |
| 1988 | |
| 1989 | dsi_vc_enable_bta_irq(channel); |
| 1990 | |
| 1991 | r = dsi_vc_send_bta(channel); |
| 1992 | if (r) |
| 1993 | goto err; |
| 1994 | |
| 1995 | if (wait_for_completion_timeout(&dsi.bta_completion, |
| 1996 | msecs_to_jiffies(500)) == 0) { |
| 1997 | DSSERR("Failed to receive BTA\n"); |
| 1998 | r = -EIO; |
| 1999 | goto err; |
| 2000 | } |
| 2001 | |
| 2002 | err = dsi_get_errors(); |
| 2003 | if (err) { |
| 2004 | DSSERR("Error while sending BTA: %x\n", err); |
| 2005 | r = -EIO; |
| 2006 | goto err; |
| 2007 | } |
| 2008 | err: |
| 2009 | dsi_vc_disable_bta_irq(channel); |
| 2010 | |
| 2011 | return r; |
| 2012 | } |
| 2013 | EXPORT_SYMBOL(dsi_vc_send_bta_sync); |
| 2014 | |
| 2015 | static inline void dsi_vc_write_long_header(int channel, u8 data_type, |
| 2016 | u16 len, u8 ecc) |
| 2017 | { |
| 2018 | u32 val; |
| 2019 | u8 data_id; |
| 2020 | |
Tomi Valkeinen | 4f76502 | 2010-01-18 16:27:52 +0200 | [diff] [blame] | 2021 | WARN_ON(!dsi_bus_is_locked()); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2022 | |
| 2023 | /*data_id = data_type | channel << 6; */ |
| 2024 | data_id = data_type | dsi.vc[channel].dest_per << 6; |
| 2025 | |
| 2026 | val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | |
| 2027 | FLD_VAL(ecc, 31, 24); |
| 2028 | |
| 2029 | dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); |
| 2030 | } |
| 2031 | |
| 2032 | static inline void dsi_vc_write_long_payload(int channel, |
| 2033 | u8 b1, u8 b2, u8 b3, u8 b4) |
| 2034 | { |
| 2035 | u32 val; |
| 2036 | |
| 2037 | val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; |
| 2038 | |
| 2039 | /* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", |
| 2040 | b1, b2, b3, b4, val); */ |
| 2041 | |
| 2042 | dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); |
| 2043 | } |
| 2044 | |
| 2045 | static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, |
| 2046 | u8 ecc) |
| 2047 | { |
| 2048 | /*u32 val; */ |
| 2049 | int i; |
| 2050 | u8 *p; |
| 2051 | int r = 0; |
| 2052 | u8 b1, b2, b3, b4; |
| 2053 | |
| 2054 | if (dsi.debug_write) |
| 2055 | DSSDBG("dsi_vc_send_long, %d bytes\n", len); |
| 2056 | |
| 2057 | /* len + header */ |
| 2058 | if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { |
| 2059 | DSSERR("unable to send long packet: packet too long.\n"); |
| 2060 | return -EINVAL; |
| 2061 | } |
| 2062 | |
| 2063 | dsi_vc_config_l4(channel); |
| 2064 | |
| 2065 | dsi_vc_write_long_header(channel, data_type, len, ecc); |
| 2066 | |
| 2067 | /*dsi_vc_print_status(0); */ |
| 2068 | |
| 2069 | p = data; |
| 2070 | for (i = 0; i < len >> 2; i++) { |
| 2071 | if (dsi.debug_write) |
| 2072 | DSSDBG("\tsending full packet %d\n", i); |
| 2073 | /*dsi_vc_print_status(0); */ |
| 2074 | |
| 2075 | b1 = *p++; |
| 2076 | b2 = *p++; |
| 2077 | b3 = *p++; |
| 2078 | b4 = *p++; |
| 2079 | |
| 2080 | dsi_vc_write_long_payload(channel, b1, b2, b3, b4); |
| 2081 | } |
| 2082 | |
| 2083 | i = len % 4; |
| 2084 | if (i) { |
| 2085 | b1 = 0; b2 = 0; b3 = 0; |
| 2086 | |
| 2087 | if (dsi.debug_write) |
| 2088 | DSSDBG("\tsending remainder bytes %d\n", i); |
| 2089 | |
| 2090 | switch (i) { |
| 2091 | case 3: |
| 2092 | b1 = *p++; |
| 2093 | b2 = *p++; |
| 2094 | b3 = *p++; |
| 2095 | break; |
| 2096 | case 2: |
| 2097 | b1 = *p++; |
| 2098 | b2 = *p++; |
| 2099 | break; |
| 2100 | case 1: |
| 2101 | b1 = *p++; |
| 2102 | break; |
| 2103 | } |
| 2104 | |
| 2105 | dsi_vc_write_long_payload(channel, b1, b2, b3, 0); |
| 2106 | } |
| 2107 | |
| 2108 | return r; |
| 2109 | } |
| 2110 | |
| 2111 | static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) |
| 2112 | { |
| 2113 | u32 r; |
| 2114 | u8 data_id; |
| 2115 | |
Tomi Valkeinen | 4f76502 | 2010-01-18 16:27:52 +0200 | [diff] [blame] | 2116 | WARN_ON(!dsi_bus_is_locked()); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2117 | |
| 2118 | if (dsi.debug_write) |
| 2119 | DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", |
| 2120 | channel, |
| 2121 | data_type, data & 0xff, (data >> 8) & 0xff); |
| 2122 | |
| 2123 | dsi_vc_config_l4(channel); |
| 2124 | |
| 2125 | if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { |
| 2126 | DSSERR("ERROR FIFO FULL, aborting transfer\n"); |
| 2127 | return -EINVAL; |
| 2128 | } |
| 2129 | |
Tomi Valkeinen | 397bb3c | 2009-12-03 13:37:31 +0200 | [diff] [blame] | 2130 | data_id = data_type | dsi.vc[channel].dest_per << 6; |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2131 | |
| 2132 | r = (data_id << 0) | (data << 8) | (ecc << 24); |
| 2133 | |
| 2134 | dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); |
| 2135 | |
| 2136 | return 0; |
| 2137 | } |
| 2138 | |
| 2139 | int dsi_vc_send_null(int channel) |
| 2140 | { |
| 2141 | u8 nullpkg[] = {0, 0, 0, 0}; |
Tomi Valkeinen | 397bb3c | 2009-12-03 13:37:31 +0200 | [diff] [blame] | 2142 | return dsi_vc_send_long(channel, DSI_DT_NULL_PACKET, nullpkg, 4, 0); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2143 | } |
| 2144 | EXPORT_SYMBOL(dsi_vc_send_null); |
| 2145 | |
| 2146 | int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) |
| 2147 | { |
| 2148 | int r; |
| 2149 | |
| 2150 | BUG_ON(len == 0); |
| 2151 | |
| 2152 | if (len == 1) { |
| 2153 | r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, |
| 2154 | data[0], 0); |
| 2155 | } else if (len == 2) { |
| 2156 | r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, |
| 2157 | data[0] | (data[1] << 8), 0); |
| 2158 | } else { |
| 2159 | /* 0x39 = DCS Long Write */ |
| 2160 | r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, |
| 2161 | data, len, 0); |
| 2162 | } |
| 2163 | |
| 2164 | return r; |
| 2165 | } |
| 2166 | EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); |
| 2167 | |
| 2168 | int dsi_vc_dcs_write(int channel, u8 *data, int len) |
| 2169 | { |
| 2170 | int r; |
| 2171 | |
| 2172 | r = dsi_vc_dcs_write_nosync(channel, data, len); |
| 2173 | if (r) |
| 2174 | return r; |
| 2175 | |
| 2176 | r = dsi_vc_send_bta_sync(channel); |
| 2177 | |
| 2178 | return r; |
| 2179 | } |
| 2180 | EXPORT_SYMBOL(dsi_vc_dcs_write); |
| 2181 | |
Tomi Valkeinen | 828c48f | 2009-12-16 14:53:15 +0200 | [diff] [blame] | 2182 | int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd) |
| 2183 | { |
| 2184 | return dsi_vc_dcs_write(channel, &dcs_cmd, 1); |
| 2185 | } |
| 2186 | EXPORT_SYMBOL(dsi_vc_dcs_write_0); |
| 2187 | |
| 2188 | int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param) |
| 2189 | { |
| 2190 | u8 buf[2]; |
| 2191 | buf[0] = dcs_cmd; |
| 2192 | buf[1] = param; |
| 2193 | return dsi_vc_dcs_write(channel, buf, 2); |
| 2194 | } |
| 2195 | EXPORT_SYMBOL(dsi_vc_dcs_write_1); |
| 2196 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2197 | int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) |
| 2198 | { |
| 2199 | u32 val; |
| 2200 | u8 dt; |
| 2201 | int r; |
| 2202 | |
| 2203 | if (dsi.debug_read) |
Tomi Valkeinen | ff90a34 | 2009-12-03 13:38:04 +0200 | [diff] [blame] | 2204 | DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2205 | |
| 2206 | r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); |
| 2207 | if (r) |
| 2208 | return r; |
| 2209 | |
| 2210 | r = dsi_vc_send_bta_sync(channel); |
| 2211 | if (r) |
| 2212 | return r; |
| 2213 | |
| 2214 | /* RX_FIFO_NOT_EMPTY */ |
| 2215 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { |
| 2216 | DSSERR("RX fifo empty when trying to read.\n"); |
| 2217 | return -EIO; |
| 2218 | } |
| 2219 | |
| 2220 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| 2221 | if (dsi.debug_read) |
| 2222 | DSSDBG("\theader: %08x\n", val); |
| 2223 | dt = FLD_GET(val, 5, 0); |
| 2224 | if (dt == DSI_DT_RX_ACK_WITH_ERR) { |
| 2225 | u16 err = FLD_GET(val, 23, 8); |
| 2226 | dsi_show_rx_ack_with_err(err); |
| 2227 | return -EIO; |
| 2228 | |
| 2229 | } else if (dt == DSI_DT_RX_SHORT_READ_1) { |
| 2230 | u8 data = FLD_GET(val, 15, 8); |
| 2231 | if (dsi.debug_read) |
| 2232 | DSSDBG("\tDCS short response, 1 byte: %02x\n", data); |
| 2233 | |
| 2234 | if (buflen < 1) |
| 2235 | return -EIO; |
| 2236 | |
| 2237 | buf[0] = data; |
| 2238 | |
| 2239 | return 1; |
| 2240 | } else if (dt == DSI_DT_RX_SHORT_READ_2) { |
| 2241 | u16 data = FLD_GET(val, 23, 8); |
| 2242 | if (dsi.debug_read) |
| 2243 | DSSDBG("\tDCS short response, 2 byte: %04x\n", data); |
| 2244 | |
| 2245 | if (buflen < 2) |
| 2246 | return -EIO; |
| 2247 | |
| 2248 | buf[0] = data & 0xff; |
| 2249 | buf[1] = (data >> 8) & 0xff; |
| 2250 | |
| 2251 | return 2; |
| 2252 | } else if (dt == DSI_DT_RX_DCS_LONG_READ) { |
| 2253 | int w; |
| 2254 | int len = FLD_GET(val, 23, 8); |
| 2255 | if (dsi.debug_read) |
| 2256 | DSSDBG("\tDCS long response, len %d\n", len); |
| 2257 | |
| 2258 | if (len > buflen) |
| 2259 | return -EIO; |
| 2260 | |
| 2261 | /* two byte checksum ends the packet, not included in len */ |
| 2262 | for (w = 0; w < len + 2;) { |
| 2263 | int b; |
| 2264 | val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| 2265 | if (dsi.debug_read) |
| 2266 | DSSDBG("\t\t%02x %02x %02x %02x\n", |
| 2267 | (val >> 0) & 0xff, |
| 2268 | (val >> 8) & 0xff, |
| 2269 | (val >> 16) & 0xff, |
| 2270 | (val >> 24) & 0xff); |
| 2271 | |
| 2272 | for (b = 0; b < 4; ++b) { |
| 2273 | if (w < len) |
| 2274 | buf[w] = (val >> (b * 8)) & 0xff; |
| 2275 | /* we discard the 2 byte checksum */ |
| 2276 | ++w; |
| 2277 | } |
| 2278 | } |
| 2279 | |
| 2280 | return len; |
| 2281 | |
| 2282 | } else { |
| 2283 | DSSERR("\tunknown datatype 0x%02x\n", dt); |
| 2284 | return -EIO; |
| 2285 | } |
| 2286 | } |
| 2287 | EXPORT_SYMBOL(dsi_vc_dcs_read); |
| 2288 | |
Tomi Valkeinen | 828c48f | 2009-12-16 14:53:15 +0200 | [diff] [blame] | 2289 | int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data) |
| 2290 | { |
| 2291 | int r; |
| 2292 | |
| 2293 | r = dsi_vc_dcs_read(channel, dcs_cmd, data, 1); |
| 2294 | |
| 2295 | if (r < 0) |
| 2296 | return r; |
| 2297 | |
| 2298 | if (r != 1) |
| 2299 | return -EIO; |
| 2300 | |
| 2301 | return 0; |
| 2302 | } |
| 2303 | EXPORT_SYMBOL(dsi_vc_dcs_read_1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2304 | |
| 2305 | int dsi_vc_set_max_rx_packet_size(int channel, u16 len) |
| 2306 | { |
| 2307 | int r; |
| 2308 | r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, |
| 2309 | len, 0); |
| 2310 | |
| 2311 | if (r) |
| 2312 | return r; |
| 2313 | |
| 2314 | r = dsi_vc_send_bta_sync(channel); |
| 2315 | |
| 2316 | return r; |
| 2317 | } |
| 2318 | EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); |
| 2319 | |
| 2320 | static void dsi_set_lp_rx_timeout(unsigned long ns) |
| 2321 | { |
| 2322 | u32 r; |
| 2323 | unsigned x4, x16; |
| 2324 | unsigned long fck; |
| 2325 | unsigned long ticks; |
| 2326 | |
| 2327 | /* ticks in DSI_FCK */ |
| 2328 | |
| 2329 | fck = dsi_fclk_rate(); |
| 2330 | ticks = (fck / 1000 / 1000) * ns / 1000; |
| 2331 | x4 = 0; |
| 2332 | x16 = 0; |
| 2333 | |
| 2334 | if (ticks > 0x1fff) { |
| 2335 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| 2336 | x4 = 1; |
| 2337 | x16 = 0; |
| 2338 | } |
| 2339 | |
| 2340 | if (ticks > 0x1fff) { |
| 2341 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| 2342 | x4 = 0; |
| 2343 | x16 = 1; |
| 2344 | } |
| 2345 | |
| 2346 | if (ticks > 0x1fff) { |
| 2347 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| 2348 | x4 = 1; |
| 2349 | x16 = 1; |
| 2350 | } |
| 2351 | |
| 2352 | if (ticks > 0x1fff) { |
| 2353 | DSSWARN("LP_TX_TO over limit, setting it to max\n"); |
| 2354 | ticks = 0x1fff; |
| 2355 | x4 = 1; |
| 2356 | x16 = 1; |
| 2357 | } |
| 2358 | |
| 2359 | r = dsi_read_reg(DSI_TIMING2); |
| 2360 | r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ |
| 2361 | r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ |
| 2362 | r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ |
| 2363 | r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ |
| 2364 | dsi_write_reg(DSI_TIMING2, r); |
| 2365 | |
| 2366 | DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n", |
| 2367 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| 2368 | (fck / 1000 / 1000), |
| 2369 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| 2370 | } |
| 2371 | |
| 2372 | static void dsi_set_ta_timeout(unsigned long ns) |
| 2373 | { |
| 2374 | u32 r; |
| 2375 | unsigned x8, x16; |
| 2376 | unsigned long fck; |
| 2377 | unsigned long ticks; |
| 2378 | |
| 2379 | /* ticks in DSI_FCK */ |
| 2380 | fck = dsi_fclk_rate(); |
| 2381 | ticks = (fck / 1000 / 1000) * ns / 1000; |
| 2382 | x8 = 0; |
| 2383 | x16 = 0; |
| 2384 | |
| 2385 | if (ticks > 0x1fff) { |
| 2386 | ticks = (fck / 1000 / 1000) * ns / 1000 / 8; |
| 2387 | x8 = 1; |
| 2388 | x16 = 0; |
| 2389 | } |
| 2390 | |
| 2391 | if (ticks > 0x1fff) { |
| 2392 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| 2393 | x8 = 0; |
| 2394 | x16 = 1; |
| 2395 | } |
| 2396 | |
| 2397 | if (ticks > 0x1fff) { |
| 2398 | ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16); |
| 2399 | x8 = 1; |
| 2400 | x16 = 1; |
| 2401 | } |
| 2402 | |
| 2403 | if (ticks > 0x1fff) { |
| 2404 | DSSWARN("TA_TO over limit, setting it to max\n"); |
| 2405 | ticks = 0x1fff; |
| 2406 | x8 = 1; |
| 2407 | x16 = 1; |
| 2408 | } |
| 2409 | |
| 2410 | r = dsi_read_reg(DSI_TIMING1); |
| 2411 | r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ |
| 2412 | r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ |
| 2413 | r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ |
| 2414 | r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ |
| 2415 | dsi_write_reg(DSI_TIMING1, r); |
| 2416 | |
| 2417 | DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n", |
| 2418 | (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / |
| 2419 | (fck / 1000 / 1000), |
| 2420 | ticks, x8 ? " x8" : "", x16 ? " x16" : ""); |
| 2421 | } |
| 2422 | |
| 2423 | static void dsi_set_stop_state_counter(unsigned long ns) |
| 2424 | { |
| 2425 | u32 r; |
| 2426 | unsigned x4, x16; |
| 2427 | unsigned long fck; |
| 2428 | unsigned long ticks; |
| 2429 | |
| 2430 | /* ticks in DSI_FCK */ |
| 2431 | |
| 2432 | fck = dsi_fclk_rate(); |
| 2433 | ticks = (fck / 1000 / 1000) * ns / 1000; |
| 2434 | x4 = 0; |
| 2435 | x16 = 0; |
| 2436 | |
| 2437 | if (ticks > 0x1fff) { |
| 2438 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| 2439 | x4 = 1; |
| 2440 | x16 = 0; |
| 2441 | } |
| 2442 | |
| 2443 | if (ticks > 0x1fff) { |
| 2444 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| 2445 | x4 = 0; |
| 2446 | x16 = 1; |
| 2447 | } |
| 2448 | |
| 2449 | if (ticks > 0x1fff) { |
| 2450 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| 2451 | x4 = 1; |
| 2452 | x16 = 1; |
| 2453 | } |
| 2454 | |
| 2455 | if (ticks > 0x1fff) { |
| 2456 | DSSWARN("STOP_STATE_COUNTER_IO over limit, " |
| 2457 | "setting it to max\n"); |
| 2458 | ticks = 0x1fff; |
| 2459 | x4 = 1; |
| 2460 | x16 = 1; |
| 2461 | } |
| 2462 | |
| 2463 | r = dsi_read_reg(DSI_TIMING1); |
| 2464 | r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ |
| 2465 | r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ |
| 2466 | r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ |
| 2467 | r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ |
| 2468 | dsi_write_reg(DSI_TIMING1, r); |
| 2469 | |
| 2470 | DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n", |
| 2471 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| 2472 | (fck / 1000 / 1000), |
| 2473 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| 2474 | } |
| 2475 | |
| 2476 | static void dsi_set_hs_tx_timeout(unsigned long ns) |
| 2477 | { |
| 2478 | u32 r; |
| 2479 | unsigned x4, x16; |
| 2480 | unsigned long fck; |
| 2481 | unsigned long ticks; |
| 2482 | |
| 2483 | /* ticks in TxByteClkHS */ |
| 2484 | |
| 2485 | fck = dsi_get_txbyteclkhs(); |
| 2486 | ticks = (fck / 1000 / 1000) * ns / 1000; |
| 2487 | x4 = 0; |
| 2488 | x16 = 0; |
| 2489 | |
| 2490 | if (ticks > 0x1fff) { |
| 2491 | ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| 2492 | x4 = 1; |
| 2493 | x16 = 0; |
| 2494 | } |
| 2495 | |
| 2496 | if (ticks > 0x1fff) { |
| 2497 | ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| 2498 | x4 = 0; |
| 2499 | x16 = 1; |
| 2500 | } |
| 2501 | |
| 2502 | if (ticks > 0x1fff) { |
| 2503 | ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| 2504 | x4 = 1; |
| 2505 | x16 = 1; |
| 2506 | } |
| 2507 | |
| 2508 | if (ticks > 0x1fff) { |
| 2509 | DSSWARN("HS_TX_TO over limit, setting it to max\n"); |
| 2510 | ticks = 0x1fff; |
| 2511 | x4 = 1; |
| 2512 | x16 = 1; |
| 2513 | } |
| 2514 | |
| 2515 | r = dsi_read_reg(DSI_TIMING2); |
| 2516 | r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ |
| 2517 | r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ |
| 2518 | r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ |
| 2519 | r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ |
| 2520 | dsi_write_reg(DSI_TIMING2, r); |
| 2521 | |
| 2522 | DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n", |
| 2523 | (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| 2524 | (fck / 1000 / 1000), |
| 2525 | ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| 2526 | } |
| 2527 | static int dsi_proto_config(struct omap_dss_device *dssdev) |
| 2528 | { |
| 2529 | u32 r; |
| 2530 | int buswidth = 0; |
| 2531 | |
| 2532 | dsi_config_tx_fifo(DSI_FIFO_SIZE_128, |
| 2533 | DSI_FIFO_SIZE_0, |
| 2534 | DSI_FIFO_SIZE_0, |
| 2535 | DSI_FIFO_SIZE_0); |
| 2536 | |
| 2537 | dsi_config_rx_fifo(DSI_FIFO_SIZE_128, |
| 2538 | DSI_FIFO_SIZE_0, |
| 2539 | DSI_FIFO_SIZE_0, |
| 2540 | DSI_FIFO_SIZE_0); |
| 2541 | |
| 2542 | /* XXX what values for the timeouts? */ |
| 2543 | dsi_set_stop_state_counter(1000); |
| 2544 | dsi_set_ta_timeout(6400000); |
| 2545 | dsi_set_lp_rx_timeout(48000); |
| 2546 | dsi_set_hs_tx_timeout(1000000); |
| 2547 | |
| 2548 | switch (dssdev->ctrl.pixel_size) { |
| 2549 | case 16: |
| 2550 | buswidth = 0; |
| 2551 | break; |
| 2552 | case 18: |
| 2553 | buswidth = 1; |
| 2554 | break; |
| 2555 | case 24: |
| 2556 | buswidth = 2; |
| 2557 | break; |
| 2558 | default: |
| 2559 | BUG(); |
| 2560 | } |
| 2561 | |
| 2562 | r = dsi_read_reg(DSI_CTRL); |
| 2563 | r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ |
| 2564 | r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ |
| 2565 | r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ |
| 2566 | r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/ |
| 2567 | r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ |
| 2568 | r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ |
| 2569 | r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ |
| 2570 | r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ |
| 2571 | r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ |
| 2572 | r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ |
| 2573 | r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ |
| 2574 | |
| 2575 | dsi_write_reg(DSI_CTRL, r); |
| 2576 | |
| 2577 | dsi_vc_initial_config(0); |
| 2578 | |
| 2579 | /* set all vc targets to peripheral 0 */ |
| 2580 | dsi.vc[0].dest_per = 0; |
| 2581 | dsi.vc[1].dest_per = 0; |
| 2582 | dsi.vc[2].dest_per = 0; |
| 2583 | dsi.vc[3].dest_per = 0; |
| 2584 | |
| 2585 | return 0; |
| 2586 | } |
| 2587 | |
| 2588 | static void dsi_proto_timings(struct omap_dss_device *dssdev) |
| 2589 | { |
| 2590 | unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; |
| 2591 | unsigned tclk_pre, tclk_post; |
| 2592 | unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; |
| 2593 | unsigned ths_trail, ths_exit; |
| 2594 | unsigned ddr_clk_pre, ddr_clk_post; |
| 2595 | unsigned enter_hs_mode_lat, exit_hs_mode_lat; |
| 2596 | unsigned ths_eot; |
| 2597 | u32 r; |
| 2598 | |
| 2599 | r = dsi_read_reg(DSI_DSIPHY_CFG0); |
| 2600 | ths_prepare = FLD_GET(r, 31, 24); |
| 2601 | ths_prepare_ths_zero = FLD_GET(r, 23, 16); |
| 2602 | ths_zero = ths_prepare_ths_zero - ths_prepare; |
| 2603 | ths_trail = FLD_GET(r, 15, 8); |
| 2604 | ths_exit = FLD_GET(r, 7, 0); |
| 2605 | |
| 2606 | r = dsi_read_reg(DSI_DSIPHY_CFG1); |
| 2607 | tlpx = FLD_GET(r, 22, 16) * 2; |
| 2608 | tclk_trail = FLD_GET(r, 15, 8); |
| 2609 | tclk_zero = FLD_GET(r, 7, 0); |
| 2610 | |
| 2611 | r = dsi_read_reg(DSI_DSIPHY_CFG2); |
| 2612 | tclk_prepare = FLD_GET(r, 7, 0); |
| 2613 | |
| 2614 | /* min 8*UI */ |
| 2615 | tclk_pre = 20; |
| 2616 | /* min 60ns + 52*UI */ |
| 2617 | tclk_post = ns2ddr(60) + 26; |
| 2618 | |
| 2619 | /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */ |
| 2620 | if (dssdev->phy.dsi.data1_lane != 0 && |
| 2621 | dssdev->phy.dsi.data2_lane != 0) |
| 2622 | ths_eot = 2; |
| 2623 | else |
| 2624 | ths_eot = 4; |
| 2625 | |
| 2626 | ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare, |
| 2627 | 4); |
| 2628 | ddr_clk_post = DIV_ROUND_UP(tclk_post + ths_trail, 4) + ths_eot; |
| 2629 | |
| 2630 | BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255); |
| 2631 | BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255); |
| 2632 | |
| 2633 | r = dsi_read_reg(DSI_CLK_TIMING); |
| 2634 | r = FLD_MOD(r, ddr_clk_pre, 15, 8); |
| 2635 | r = FLD_MOD(r, ddr_clk_post, 7, 0); |
| 2636 | dsi_write_reg(DSI_CLK_TIMING, r); |
| 2637 | |
| 2638 | DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n", |
| 2639 | ddr_clk_pre, |
| 2640 | ddr_clk_post); |
| 2641 | |
| 2642 | enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) + |
| 2643 | DIV_ROUND_UP(ths_prepare, 4) + |
| 2644 | DIV_ROUND_UP(ths_zero + 3, 4); |
| 2645 | |
| 2646 | exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot; |
| 2647 | |
| 2648 | r = FLD_VAL(enter_hs_mode_lat, 31, 16) | |
| 2649 | FLD_VAL(exit_hs_mode_lat, 15, 0); |
| 2650 | dsi_write_reg(DSI_VM_TIMING7, r); |
| 2651 | |
| 2652 | DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n", |
| 2653 | enter_hs_mode_lat, exit_hs_mode_lat); |
| 2654 | } |
| 2655 | |
| 2656 | |
| 2657 | #define DSI_DECL_VARS \ |
| 2658 | int __dsi_cb = 0; u32 __dsi_cv = 0; |
| 2659 | |
| 2660 | #define DSI_FLUSH(ch) \ |
| 2661 | if (__dsi_cb > 0) { \ |
| 2662 | /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ |
| 2663 | dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ |
| 2664 | __dsi_cb = __dsi_cv = 0; \ |
| 2665 | } |
| 2666 | |
| 2667 | #define DSI_PUSH(ch, data) \ |
| 2668 | do { \ |
| 2669 | __dsi_cv |= (data) << (__dsi_cb * 8); \ |
| 2670 | /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ |
| 2671 | if (++__dsi_cb > 3) \ |
| 2672 | DSI_FLUSH(ch); \ |
| 2673 | } while (0) |
| 2674 | |
| 2675 | static int dsi_update_screen_l4(struct omap_dss_device *dssdev, |
| 2676 | int x, int y, int w, int h) |
| 2677 | { |
| 2678 | /* Note: supports only 24bit colors in 32bit container */ |
| 2679 | int first = 1; |
| 2680 | int fifo_stalls = 0; |
| 2681 | int max_dsi_packet_size; |
| 2682 | int max_data_per_packet; |
| 2683 | int max_pixels_per_packet; |
| 2684 | int pixels_left; |
| 2685 | int bytespp = dssdev->ctrl.pixel_size / 8; |
| 2686 | int scr_width; |
| 2687 | u32 __iomem *data; |
| 2688 | int start_offset; |
| 2689 | int horiz_inc; |
| 2690 | int current_x; |
| 2691 | struct omap_overlay *ovl; |
| 2692 | |
| 2693 | debug_irq = 0; |
| 2694 | |
| 2695 | DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", |
| 2696 | x, y, w, h); |
| 2697 | |
| 2698 | ovl = dssdev->manager->overlays[0]; |
| 2699 | |
| 2700 | if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) |
| 2701 | return -EINVAL; |
| 2702 | |
| 2703 | if (dssdev->ctrl.pixel_size != 24) |
| 2704 | return -EINVAL; |
| 2705 | |
| 2706 | scr_width = ovl->info.screen_width; |
| 2707 | data = ovl->info.vaddr; |
| 2708 | |
| 2709 | start_offset = scr_width * y + x; |
| 2710 | horiz_inc = scr_width - w; |
| 2711 | current_x = x; |
| 2712 | |
| 2713 | /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes |
| 2714 | * in fifo */ |
| 2715 | |
| 2716 | /* When using CPU, max long packet size is TX buffer size */ |
| 2717 | max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; |
| 2718 | |
| 2719 | /* we seem to get better perf if we divide the tx fifo to half, |
| 2720 | and while the other half is being sent, we fill the other half |
| 2721 | max_dsi_packet_size /= 2; */ |
| 2722 | |
| 2723 | max_data_per_packet = max_dsi_packet_size - 4 - 1; |
| 2724 | |
| 2725 | max_pixels_per_packet = max_data_per_packet / bytespp; |
| 2726 | |
| 2727 | DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); |
| 2728 | |
| 2729 | pixels_left = w * h; |
| 2730 | |
| 2731 | DSSDBG("total pixels %d\n", pixels_left); |
| 2732 | |
| 2733 | data += start_offset; |
| 2734 | |
| 2735 | while (pixels_left > 0) { |
| 2736 | /* 0x2c = write_memory_start */ |
| 2737 | /* 0x3c = write_memory_continue */ |
| 2738 | u8 dcs_cmd = first ? 0x2c : 0x3c; |
| 2739 | int pixels; |
| 2740 | DSI_DECL_VARS; |
| 2741 | first = 0; |
| 2742 | |
| 2743 | #if 1 |
| 2744 | /* using fifo not empty */ |
| 2745 | /* TX_FIFO_NOT_EMPTY */ |
| 2746 | while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2747 | fifo_stalls++; |
| 2748 | if (fifo_stalls > 0xfffff) { |
| 2749 | DSSERR("fifo stalls overflow, pixels left %d\n", |
| 2750 | pixels_left); |
| 2751 | dsi_if_enable(0); |
| 2752 | return -EIO; |
| 2753 | } |
Tomi Valkeinen | 24be78b | 2010-01-07 14:19:48 +0200 | [diff] [blame] | 2754 | udelay(1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2755 | } |
| 2756 | #elif 1 |
| 2757 | /* using fifo emptiness */ |
| 2758 | while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < |
| 2759 | max_dsi_packet_size) { |
| 2760 | fifo_stalls++; |
| 2761 | if (fifo_stalls > 0xfffff) { |
| 2762 | DSSERR("fifo stalls overflow, pixels left %d\n", |
| 2763 | pixels_left); |
| 2764 | dsi_if_enable(0); |
| 2765 | return -EIO; |
| 2766 | } |
| 2767 | } |
| 2768 | #else |
| 2769 | while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { |
| 2770 | fifo_stalls++; |
| 2771 | if (fifo_stalls > 0xfffff) { |
| 2772 | DSSERR("fifo stalls overflow, pixels left %d\n", |
| 2773 | pixels_left); |
| 2774 | dsi_if_enable(0); |
| 2775 | return -EIO; |
| 2776 | } |
| 2777 | } |
| 2778 | #endif |
| 2779 | pixels = min(max_pixels_per_packet, pixels_left); |
| 2780 | |
| 2781 | pixels_left -= pixels; |
| 2782 | |
| 2783 | dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, |
| 2784 | 1 + pixels * bytespp, 0); |
| 2785 | |
| 2786 | DSI_PUSH(0, dcs_cmd); |
| 2787 | |
| 2788 | while (pixels-- > 0) { |
| 2789 | u32 pix = __raw_readl(data++); |
| 2790 | |
| 2791 | DSI_PUSH(0, (pix >> 16) & 0xff); |
| 2792 | DSI_PUSH(0, (pix >> 8) & 0xff); |
| 2793 | DSI_PUSH(0, (pix >> 0) & 0xff); |
| 2794 | |
| 2795 | current_x++; |
| 2796 | if (current_x == x+w) { |
| 2797 | current_x = x; |
| 2798 | data += horiz_inc; |
| 2799 | } |
| 2800 | } |
| 2801 | |
| 2802 | DSI_FLUSH(0); |
| 2803 | } |
| 2804 | |
| 2805 | return 0; |
| 2806 | } |
| 2807 | |
| 2808 | static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, |
| 2809 | u16 x, u16 y, u16 w, u16 h) |
| 2810 | { |
| 2811 | unsigned bytespp; |
| 2812 | unsigned bytespl; |
| 2813 | unsigned bytespf; |
| 2814 | unsigned total_len; |
| 2815 | unsigned packet_payload; |
| 2816 | unsigned packet_len; |
| 2817 | u32 l; |
| 2818 | bool use_te_trigger; |
| 2819 | const unsigned channel = 0; |
| 2820 | /* line buffer is 1024 x 24bits */ |
| 2821 | /* XXX: for some reason using full buffer size causes considerable TX |
| 2822 | * slowdown with update sizes that fill the whole buffer */ |
| 2823 | const unsigned line_buf_size = 1023 * 3; |
| 2824 | |
| 2825 | use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; |
| 2826 | |
| 2827 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) |
| 2828 | DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", |
| 2829 | x, y, w, h); |
| 2830 | |
| 2831 | bytespp = dssdev->ctrl.pixel_size / 8; |
| 2832 | bytespl = w * bytespp; |
| 2833 | bytespf = bytespl * h; |
| 2834 | |
| 2835 | /* NOTE: packet_payload has to be equal to N * bytespl, where N is |
| 2836 | * number of lines in a packet. See errata about VP_CLK_RATIO */ |
| 2837 | |
| 2838 | if (bytespf < line_buf_size) |
| 2839 | packet_payload = bytespf; |
| 2840 | else |
| 2841 | packet_payload = (line_buf_size) / bytespl * bytespl; |
| 2842 | |
| 2843 | packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ |
| 2844 | total_len = (bytespf / packet_payload) * packet_len; |
| 2845 | |
| 2846 | if (bytespf % packet_payload) |
| 2847 | total_len += (bytespf % packet_payload) + 1; |
| 2848 | |
| 2849 | if (0) |
| 2850 | dsi_vc_print_status(1); |
| 2851 | |
| 2852 | l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ |
| 2853 | dsi_write_reg(DSI_VC_TE(channel), l); |
| 2854 | |
| 2855 | dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); |
| 2856 | |
| 2857 | if (use_te_trigger) |
| 2858 | l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ |
| 2859 | else |
| 2860 | l = FLD_MOD(l, 1, 31, 31); /* TE_START */ |
| 2861 | dsi_write_reg(DSI_VC_TE(channel), l); |
| 2862 | |
| 2863 | /* We put SIDLEMODE to no-idle for the duration of the transfer, |
| 2864 | * because DSS interrupts are not capable of waking up the CPU and the |
| 2865 | * framedone interrupt could be delayed for quite a long time. I think |
| 2866 | * the same goes for any DSS interrupts, but for some reason I have not |
| 2867 | * seen the problem anywhere else than here. |
| 2868 | */ |
| 2869 | dispc_disable_sidle(); |
| 2870 | |
| 2871 | dss_start_update(dssdev); |
| 2872 | |
| 2873 | if (use_te_trigger) { |
| 2874 | /* disable LP_RX_TO, so that we can receive TE. Time to wait |
| 2875 | * for TE is longer than the timer allows */ |
| 2876 | REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ |
| 2877 | |
| 2878 | dsi_vc_send_bta(channel); |
| 2879 | |
| 2880 | #ifdef DSI_CATCH_MISSING_TE |
| 2881 | mod_timer(&dsi.te_timer, jiffies + msecs_to_jiffies(250)); |
| 2882 | #endif |
| 2883 | } |
| 2884 | } |
| 2885 | |
| 2886 | #ifdef DSI_CATCH_MISSING_TE |
| 2887 | static void dsi_te_timeout(unsigned long arg) |
| 2888 | { |
| 2889 | DSSERR("TE not received for 250ms!\n"); |
| 2890 | } |
| 2891 | #endif |
| 2892 | |
| 2893 | static void dsi_framedone_irq_callback(void *data, u32 mask) |
| 2894 | { |
| 2895 | /* Note: We get FRAMEDONE when DISPC has finished sending pixels and |
| 2896 | * turns itself off. However, DSI still has the pixels in its buffers, |
| 2897 | * and is sending the data. |
| 2898 | */ |
| 2899 | |
| 2900 | /* SIDLEMODE back to smart-idle */ |
| 2901 | dispc_enable_sidle(); |
| 2902 | |
| 2903 | dsi.framedone_received = true; |
| 2904 | wake_up(&dsi.waitqueue); |
| 2905 | } |
| 2906 | |
| 2907 | static void dsi_set_update_region(struct omap_dss_device *dssdev, |
| 2908 | u16 x, u16 y, u16 w, u16 h) |
| 2909 | { |
| 2910 | spin_lock(&dsi.update_lock); |
| 2911 | if (dsi.update_region.dirty) { |
| 2912 | dsi.update_region.x = min(x, dsi.update_region.x); |
| 2913 | dsi.update_region.y = min(y, dsi.update_region.y); |
| 2914 | dsi.update_region.w = max(w, dsi.update_region.w); |
| 2915 | dsi.update_region.h = max(h, dsi.update_region.h); |
| 2916 | } else { |
| 2917 | dsi.update_region.x = x; |
| 2918 | dsi.update_region.y = y; |
| 2919 | dsi.update_region.w = w; |
| 2920 | dsi.update_region.h = h; |
| 2921 | } |
| 2922 | |
| 2923 | dsi.update_region.device = dssdev; |
| 2924 | dsi.update_region.dirty = true; |
| 2925 | |
| 2926 | spin_unlock(&dsi.update_lock); |
| 2927 | |
| 2928 | } |
| 2929 | |
| 2930 | static int dsi_set_update_mode(struct omap_dss_device *dssdev, |
| 2931 | enum omap_dss_update_mode mode) |
| 2932 | { |
| 2933 | int r = 0; |
| 2934 | int i; |
| 2935 | |
Tomi Valkeinen | 4f76502 | 2010-01-18 16:27:52 +0200 | [diff] [blame] | 2936 | WARN_ON(!dsi_bus_is_locked()); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2937 | |
| 2938 | if (dsi.update_mode != mode) { |
| 2939 | dsi.update_mode = mode; |
| 2940 | |
| 2941 | /* Mark the overlays dirty, and do apply(), so that we get the |
| 2942 | * overlays configured properly after update mode change. */ |
| 2943 | for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| 2944 | struct omap_overlay *ovl; |
| 2945 | ovl = omap_dss_get_overlay(i); |
| 2946 | if (ovl->manager == dssdev->manager) |
| 2947 | ovl->info_dirty = true; |
| 2948 | } |
| 2949 | |
| 2950 | r = dssdev->manager->apply(dssdev->manager); |
| 2951 | |
| 2952 | if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && |
| 2953 | mode == OMAP_DSS_UPDATE_AUTO) { |
| 2954 | u16 w, h; |
| 2955 | |
| 2956 | DSSDBG("starting auto update\n"); |
| 2957 | |
| 2958 | dssdev->get_resolution(dssdev, &w, &h); |
| 2959 | |
| 2960 | dsi_set_update_region(dssdev, 0, 0, w, h); |
| 2961 | |
| 2962 | dsi_perf_mark_start_auto(); |
| 2963 | |
| 2964 | wake_up(&dsi.waitqueue); |
| 2965 | } |
| 2966 | } |
| 2967 | |
| 2968 | return r; |
| 2969 | } |
| 2970 | |
| 2971 | static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) |
| 2972 | { |
Tomi Valkeinen | 7475e44 | 2009-12-08 17:30:24 +0200 | [diff] [blame] | 2973 | int r = 0; |
| 2974 | |
| 2975 | if (dssdev->driver->enable_te) { |
| 2976 | r = dssdev->driver->enable_te(dssdev, enable); |
| 2977 | /* XXX for some reason, DSI TE breaks if we don't wait here. |
| 2978 | * Panel bug? Needs more studying */ |
| 2979 | msleep(100); |
| 2980 | } |
| 2981 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 2982 | return r; |
| 2983 | } |
| 2984 | |
| 2985 | static void dsi_handle_framedone(void) |
| 2986 | { |
| 2987 | int r; |
| 2988 | const int channel = 0; |
| 2989 | bool use_te_trigger; |
| 2990 | |
| 2991 | use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; |
| 2992 | |
| 2993 | if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) |
| 2994 | DSSDBG("FRAMEDONE\n"); |
| 2995 | |
| 2996 | if (use_te_trigger) { |
| 2997 | /* enable LP_RX_TO again after the TE */ |
| 2998 | REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ |
| 2999 | } |
| 3000 | |
| 3001 | /* Send BTA after the frame. We need this for the TE to work, as TE |
| 3002 | * trigger is only sent for BTAs without preceding packet. Thus we need |
| 3003 | * to BTA after the pixel packets so that next BTA will cause TE |
| 3004 | * trigger. |
| 3005 | * |
| 3006 | * This is not needed when TE is not in use, but we do it anyway to |
| 3007 | * make sure that the transfer has been completed. It would be more |
| 3008 | * optimal, but more complex, to wait only just before starting next |
| 3009 | * transfer. */ |
| 3010 | r = dsi_vc_send_bta_sync(channel); |
| 3011 | if (r) |
| 3012 | DSSERR("BTA after framedone failed\n"); |
| 3013 | |
| 3014 | /* RX_FIFO_NOT_EMPTY */ |
| 3015 | if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| 3016 | DSSERR("Received error during frame transfer:\n"); |
| 3017 | dsi_vc_flush_receive_data(0); |
| 3018 | } |
| 3019 | |
| 3020 | #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC |
| 3021 | dispc_fake_vsync_irq(); |
| 3022 | #endif |
| 3023 | } |
| 3024 | |
| 3025 | static int dsi_update_thread(void *data) |
| 3026 | { |
| 3027 | unsigned long timeout; |
| 3028 | struct omap_dss_device *device; |
| 3029 | u16 x, y, w, h; |
| 3030 | |
| 3031 | while (1) { |
| 3032 | bool sched; |
| 3033 | |
| 3034 | wait_event_interruptible(dsi.waitqueue, |
| 3035 | dsi.update_mode == OMAP_DSS_UPDATE_AUTO || |
| 3036 | (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && |
| 3037 | dsi.update_region.dirty == true) || |
| 3038 | kthread_should_stop()); |
| 3039 | |
| 3040 | if (kthread_should_stop()) |
| 3041 | break; |
| 3042 | |
| 3043 | dsi_bus_lock(); |
| 3044 | |
| 3045 | if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED || |
| 3046 | kthread_should_stop()) { |
| 3047 | dsi_bus_unlock(); |
| 3048 | break; |
| 3049 | } |
| 3050 | |
| 3051 | dsi_perf_mark_setup(); |
| 3052 | |
| 3053 | if (dsi.update_region.dirty) { |
| 3054 | spin_lock(&dsi.update_lock); |
| 3055 | dsi.active_update_region = dsi.update_region; |
| 3056 | dsi.update_region.dirty = false; |
| 3057 | spin_unlock(&dsi.update_lock); |
| 3058 | } |
| 3059 | |
| 3060 | device = dsi.active_update_region.device; |
| 3061 | x = dsi.active_update_region.x; |
| 3062 | y = dsi.active_update_region.y; |
| 3063 | w = dsi.active_update_region.w; |
| 3064 | h = dsi.active_update_region.h; |
| 3065 | |
| 3066 | if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { |
| 3067 | |
| 3068 | if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) |
| 3069 | dss_setup_partial_planes(device, |
| 3070 | &x, &y, &w, &h); |
| 3071 | |
| 3072 | dispc_set_lcd_size(w, h); |
| 3073 | } |
| 3074 | |
| 3075 | if (dsi.active_update_region.dirty) { |
| 3076 | dsi.active_update_region.dirty = false; |
| 3077 | /* XXX TODO we don't need to send the coords, if they |
| 3078 | * are the same that are already programmed to the |
| 3079 | * panel. That should speed up manual update a bit */ |
| 3080 | device->driver->setup_update(device, x, y, w, h); |
| 3081 | } |
| 3082 | |
| 3083 | dsi_perf_mark_start(); |
| 3084 | |
| 3085 | if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { |
| 3086 | dsi_vc_config_vp(0); |
| 3087 | |
| 3088 | if (dsi.te_enabled && dsi.use_ext_te) |
| 3089 | device->driver->wait_for_te(device); |
| 3090 | |
| 3091 | dsi.framedone_received = false; |
| 3092 | |
| 3093 | dsi_update_screen_dispc(device, x, y, w, h); |
| 3094 | |
| 3095 | /* wait for framedone */ |
| 3096 | timeout = msecs_to_jiffies(1000); |
| 3097 | wait_event_timeout(dsi.waitqueue, |
| 3098 | dsi.framedone_received == true, |
| 3099 | timeout); |
| 3100 | |
| 3101 | if (!dsi.framedone_received) { |
| 3102 | DSSERR("framedone timeout\n"); |
| 3103 | DSSERR("failed update %d,%d %dx%d\n", |
| 3104 | x, y, w, h); |
| 3105 | |
| 3106 | dispc_enable_sidle(); |
| 3107 | dispc_enable_lcd_out(0); |
| 3108 | |
| 3109 | dsi_reset_tx_fifo(0); |
| 3110 | } else { |
| 3111 | dsi_handle_framedone(); |
| 3112 | dsi_perf_show("DISPC"); |
| 3113 | } |
| 3114 | } else { |
| 3115 | dsi_update_screen_l4(device, x, y, w, h); |
| 3116 | dsi_perf_show("L4"); |
| 3117 | } |
| 3118 | |
| 3119 | sched = atomic_read(&dsi.bus_lock.count) < 0; |
| 3120 | |
| 3121 | complete_all(&dsi.update_completion); |
| 3122 | |
| 3123 | dsi_bus_unlock(); |
| 3124 | |
| 3125 | /* XXX We need to give others chance to get the bus lock. Is |
| 3126 | * there a better way for this? */ |
| 3127 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched) |
| 3128 | schedule_timeout_interruptible(1); |
| 3129 | } |
| 3130 | |
| 3131 | DSSDBG("update thread exiting\n"); |
| 3132 | |
| 3133 | return 0; |
| 3134 | } |
| 3135 | |
| 3136 | |
| 3137 | |
| 3138 | /* Display funcs */ |
| 3139 | |
| 3140 | static int dsi_display_init_dispc(struct omap_dss_device *dssdev) |
| 3141 | { |
| 3142 | int r; |
| 3143 | |
| 3144 | r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL, |
| 3145 | DISPC_IRQ_FRAMEDONE); |
| 3146 | if (r) { |
| 3147 | DSSERR("can't get FRAMEDONE irq\n"); |
| 3148 | return r; |
| 3149 | } |
| 3150 | |
| 3151 | dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); |
| 3152 | |
| 3153 | dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); |
| 3154 | dispc_enable_fifohandcheck(1); |
| 3155 | |
| 3156 | dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); |
| 3157 | |
| 3158 | { |
| 3159 | struct omap_video_timings timings = { |
| 3160 | .hsw = 1, |
| 3161 | .hfp = 1, |
| 3162 | .hbp = 1, |
| 3163 | .vsw = 1, |
| 3164 | .vfp = 0, |
| 3165 | .vbp = 0, |
| 3166 | }; |
| 3167 | |
| 3168 | dispc_set_lcd_timings(&timings); |
| 3169 | } |
| 3170 | |
| 3171 | return 0; |
| 3172 | } |
| 3173 | |
| 3174 | static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev) |
| 3175 | { |
| 3176 | omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL, |
| 3177 | DISPC_IRQ_FRAMEDONE); |
| 3178 | } |
| 3179 | |
| 3180 | static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) |
| 3181 | { |
| 3182 | struct dsi_clock_info cinfo; |
| 3183 | int r; |
| 3184 | |
| 3185 | /* we always use DSS2_FCK as input clock */ |
| 3186 | cinfo.use_dss2_fck = true; |
| 3187 | cinfo.regn = dssdev->phy.dsi.div.regn; |
| 3188 | cinfo.regm = dssdev->phy.dsi.div.regm; |
| 3189 | cinfo.regm3 = dssdev->phy.dsi.div.regm3; |
| 3190 | cinfo.regm4 = dssdev->phy.dsi.div.regm4; |
| 3191 | r = dsi_calc_clock_rates(&cinfo); |
| 3192 | if (r) |
| 3193 | return r; |
| 3194 | |
| 3195 | r = dsi_pll_set_clock_div(&cinfo); |
| 3196 | if (r) { |
| 3197 | DSSERR("Failed to set dsi clocks\n"); |
| 3198 | return r; |
| 3199 | } |
| 3200 | |
| 3201 | return 0; |
| 3202 | } |
| 3203 | |
| 3204 | static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev) |
| 3205 | { |
| 3206 | struct dispc_clock_info dispc_cinfo; |
| 3207 | int r; |
| 3208 | unsigned long long fck; |
| 3209 | |
| 3210 | fck = dsi_get_dsi1_pll_rate(); |
| 3211 | |
| 3212 | dispc_cinfo.lck_div = dssdev->phy.dsi.div.lck_div; |
| 3213 | dispc_cinfo.pck_div = dssdev->phy.dsi.div.pck_div; |
| 3214 | |
| 3215 | r = dispc_calc_clock_rates(fck, &dispc_cinfo); |
| 3216 | if (r) { |
| 3217 | DSSERR("Failed to calc dispc clocks\n"); |
| 3218 | return r; |
| 3219 | } |
| 3220 | |
| 3221 | r = dispc_set_clock_div(&dispc_cinfo); |
| 3222 | if (r) { |
| 3223 | DSSERR("Failed to set dispc clocks\n"); |
| 3224 | return r; |
| 3225 | } |
| 3226 | |
| 3227 | return 0; |
| 3228 | } |
| 3229 | |
| 3230 | static int dsi_display_init_dsi(struct omap_dss_device *dssdev) |
| 3231 | { |
| 3232 | int r; |
| 3233 | |
| 3234 | _dsi_print_reset_status(); |
| 3235 | |
| 3236 | r = dsi_pll_init(dssdev, true, true); |
| 3237 | if (r) |
| 3238 | goto err0; |
| 3239 | |
| 3240 | r = dsi_configure_dsi_clocks(dssdev); |
| 3241 | if (r) |
| 3242 | goto err1; |
| 3243 | |
Tomi Valkeinen | 2f18c4d | 2010-01-08 18:00:36 +0200 | [diff] [blame] | 3244 | dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK); |
| 3245 | dss_select_dsi_clk_source(DSS_SRC_DSI2_PLL_FCLK); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3246 | |
| 3247 | DSSDBG("PLL OK\n"); |
| 3248 | |
| 3249 | r = dsi_configure_dispc_clocks(dssdev); |
| 3250 | if (r) |
| 3251 | goto err2; |
| 3252 | |
| 3253 | r = dsi_complexio_init(dssdev); |
| 3254 | if (r) |
| 3255 | goto err2; |
| 3256 | |
| 3257 | _dsi_print_reset_status(); |
| 3258 | |
| 3259 | dsi_proto_timings(dssdev); |
| 3260 | dsi_set_lp_clk_divisor(dssdev); |
| 3261 | |
| 3262 | if (1) |
| 3263 | _dsi_print_reset_status(); |
| 3264 | |
| 3265 | r = dsi_proto_config(dssdev); |
| 3266 | if (r) |
| 3267 | goto err3; |
| 3268 | |
| 3269 | /* enable interface */ |
| 3270 | dsi_vc_enable(0, 1); |
| 3271 | dsi_if_enable(1); |
| 3272 | dsi_force_tx_stop_mode_io(); |
| 3273 | |
| 3274 | if (dssdev->driver->enable) { |
| 3275 | r = dssdev->driver->enable(dssdev); |
| 3276 | if (r) |
| 3277 | goto err4; |
| 3278 | } |
| 3279 | |
| 3280 | /* enable high-speed after initial config */ |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 3281 | omapdss_dsi_vc_enable_hs(0, 1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3282 | |
| 3283 | return 0; |
| 3284 | err4: |
| 3285 | dsi_if_enable(0); |
| 3286 | err3: |
| 3287 | dsi_complexio_uninit(); |
| 3288 | err2: |
Tomi Valkeinen | 2f18c4d | 2010-01-08 18:00:36 +0200 | [diff] [blame] | 3289 | dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| 3290 | dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3291 | err1: |
| 3292 | dsi_pll_uninit(); |
| 3293 | err0: |
| 3294 | return r; |
| 3295 | } |
| 3296 | |
| 3297 | static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) |
| 3298 | { |
| 3299 | if (dssdev->driver->disable) |
| 3300 | dssdev->driver->disable(dssdev); |
| 3301 | |
Tomi Valkeinen | 2f18c4d | 2010-01-08 18:00:36 +0200 | [diff] [blame] | 3302 | dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| 3303 | dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3304 | dsi_complexio_uninit(); |
| 3305 | dsi_pll_uninit(); |
| 3306 | } |
| 3307 | |
| 3308 | static int dsi_core_init(void) |
| 3309 | { |
| 3310 | /* Autoidle */ |
| 3311 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); |
| 3312 | |
| 3313 | /* ENWAKEUP */ |
| 3314 | REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); |
| 3315 | |
| 3316 | /* SIDLEMODE smart-idle */ |
| 3317 | REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); |
| 3318 | |
| 3319 | _dsi_initialize_irq(); |
| 3320 | |
| 3321 | return 0; |
| 3322 | } |
| 3323 | |
| 3324 | static int dsi_display_enable(struct omap_dss_device *dssdev) |
| 3325 | { |
| 3326 | int r = 0; |
| 3327 | |
| 3328 | DSSDBG("dsi_display_enable\n"); |
| 3329 | |
| 3330 | mutex_lock(&dsi.lock); |
| 3331 | dsi_bus_lock(); |
| 3332 | |
| 3333 | r = omap_dss_start_device(dssdev); |
| 3334 | if (r) { |
| 3335 | DSSERR("failed to start device\n"); |
| 3336 | goto err0; |
| 3337 | } |
| 3338 | |
| 3339 | if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { |
| 3340 | DSSERR("dssdev already enabled\n"); |
| 3341 | r = -EINVAL; |
| 3342 | goto err1; |
| 3343 | } |
| 3344 | |
| 3345 | enable_clocks(1); |
| 3346 | dsi_enable_pll_clock(1); |
| 3347 | |
| 3348 | r = _dsi_reset(); |
| 3349 | if (r) |
| 3350 | goto err2; |
| 3351 | |
| 3352 | dsi_core_init(); |
| 3353 | |
| 3354 | r = dsi_display_init_dispc(dssdev); |
| 3355 | if (r) |
| 3356 | goto err2; |
| 3357 | |
| 3358 | r = dsi_display_init_dsi(dssdev); |
| 3359 | if (r) |
| 3360 | goto err3; |
| 3361 | |
| 3362 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| 3363 | |
| 3364 | dsi.use_ext_te = dssdev->phy.dsi.ext_te; |
| 3365 | r = dsi_set_te(dssdev, dsi.te_enabled); |
| 3366 | if (r) |
| 3367 | goto err4; |
| 3368 | |
| 3369 | dsi_set_update_mode(dssdev, dsi.user_update_mode); |
| 3370 | |
| 3371 | dsi_bus_unlock(); |
| 3372 | mutex_unlock(&dsi.lock); |
| 3373 | |
| 3374 | return 0; |
| 3375 | |
| 3376 | err4: |
| 3377 | |
| 3378 | dsi_display_uninit_dsi(dssdev); |
| 3379 | err3: |
| 3380 | dsi_display_uninit_dispc(dssdev); |
| 3381 | err2: |
| 3382 | enable_clocks(0); |
| 3383 | dsi_enable_pll_clock(0); |
| 3384 | err1: |
| 3385 | omap_dss_stop_device(dssdev); |
| 3386 | err0: |
| 3387 | dsi_bus_unlock(); |
| 3388 | mutex_unlock(&dsi.lock); |
| 3389 | DSSDBG("dsi_display_enable FAILED\n"); |
| 3390 | return r; |
| 3391 | } |
| 3392 | |
| 3393 | static void dsi_display_disable(struct omap_dss_device *dssdev) |
| 3394 | { |
| 3395 | DSSDBG("dsi_display_disable\n"); |
| 3396 | |
| 3397 | mutex_lock(&dsi.lock); |
| 3398 | dsi_bus_lock(); |
| 3399 | |
| 3400 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || |
| 3401 | dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) |
| 3402 | goto end; |
| 3403 | |
| 3404 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; |
| 3405 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| 3406 | |
| 3407 | dsi_display_uninit_dispc(dssdev); |
| 3408 | |
| 3409 | dsi_display_uninit_dsi(dssdev); |
| 3410 | |
| 3411 | enable_clocks(0); |
| 3412 | dsi_enable_pll_clock(0); |
| 3413 | |
| 3414 | omap_dss_stop_device(dssdev); |
| 3415 | end: |
| 3416 | dsi_bus_unlock(); |
| 3417 | mutex_unlock(&dsi.lock); |
| 3418 | } |
| 3419 | |
| 3420 | static int dsi_display_suspend(struct omap_dss_device *dssdev) |
| 3421 | { |
| 3422 | DSSDBG("dsi_display_suspend\n"); |
| 3423 | |
| 3424 | mutex_lock(&dsi.lock); |
| 3425 | dsi_bus_lock(); |
| 3426 | |
| 3427 | if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || |
| 3428 | dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) |
| 3429 | goto end; |
| 3430 | |
| 3431 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; |
| 3432 | dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; |
| 3433 | |
| 3434 | dsi_display_uninit_dispc(dssdev); |
| 3435 | |
| 3436 | dsi_display_uninit_dsi(dssdev); |
| 3437 | |
| 3438 | enable_clocks(0); |
| 3439 | dsi_enable_pll_clock(0); |
| 3440 | end: |
| 3441 | dsi_bus_unlock(); |
| 3442 | mutex_unlock(&dsi.lock); |
| 3443 | |
| 3444 | return 0; |
| 3445 | } |
| 3446 | |
| 3447 | static int dsi_display_resume(struct omap_dss_device *dssdev) |
| 3448 | { |
| 3449 | int r; |
| 3450 | |
| 3451 | DSSDBG("dsi_display_resume\n"); |
| 3452 | |
| 3453 | mutex_lock(&dsi.lock); |
| 3454 | dsi_bus_lock(); |
| 3455 | |
| 3456 | if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { |
| 3457 | DSSERR("dssdev not suspended\n"); |
| 3458 | r = -EINVAL; |
| 3459 | goto err0; |
| 3460 | } |
| 3461 | |
| 3462 | enable_clocks(1); |
| 3463 | dsi_enable_pll_clock(1); |
| 3464 | |
| 3465 | r = _dsi_reset(); |
| 3466 | if (r) |
| 3467 | goto err1; |
| 3468 | |
| 3469 | dsi_core_init(); |
| 3470 | |
| 3471 | r = dsi_display_init_dispc(dssdev); |
| 3472 | if (r) |
| 3473 | goto err1; |
| 3474 | |
| 3475 | r = dsi_display_init_dsi(dssdev); |
| 3476 | if (r) |
| 3477 | goto err2; |
| 3478 | |
| 3479 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| 3480 | |
| 3481 | r = dsi_set_te(dssdev, dsi.te_enabled); |
| 3482 | if (r) |
| 3483 | goto err2; |
| 3484 | |
| 3485 | dsi_set_update_mode(dssdev, dsi.user_update_mode); |
| 3486 | |
| 3487 | dsi_bus_unlock(); |
| 3488 | mutex_unlock(&dsi.lock); |
| 3489 | |
| 3490 | return 0; |
| 3491 | |
| 3492 | err2: |
| 3493 | dsi_display_uninit_dispc(dssdev); |
| 3494 | err1: |
| 3495 | enable_clocks(0); |
| 3496 | dsi_enable_pll_clock(0); |
| 3497 | err0: |
| 3498 | dsi_bus_unlock(); |
| 3499 | mutex_unlock(&dsi.lock); |
| 3500 | DSSDBG("dsi_display_resume FAILED\n"); |
| 3501 | return r; |
| 3502 | } |
| 3503 | |
| 3504 | static int dsi_display_update(struct omap_dss_device *dssdev, |
| 3505 | u16 x, u16 y, u16 w, u16 h) |
| 3506 | { |
| 3507 | int r = 0; |
| 3508 | u16 dw, dh; |
| 3509 | |
| 3510 | DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); |
| 3511 | |
| 3512 | mutex_lock(&dsi.lock); |
| 3513 | |
| 3514 | if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) |
| 3515 | goto end; |
| 3516 | |
| 3517 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| 3518 | goto end; |
| 3519 | |
| 3520 | dssdev->get_resolution(dssdev, &dw, &dh); |
| 3521 | |
| 3522 | if (x > dw || y > dh) |
| 3523 | goto end; |
| 3524 | |
| 3525 | if (x + w > dw) |
| 3526 | w = dw - x; |
| 3527 | |
| 3528 | if (y + h > dh) |
| 3529 | h = dh - y; |
| 3530 | |
| 3531 | if (w == 0 || h == 0) |
| 3532 | goto end; |
| 3533 | |
| 3534 | if (w == 1) { |
| 3535 | r = -EINVAL; |
| 3536 | goto end; |
| 3537 | } |
| 3538 | |
| 3539 | dsi_set_update_region(dssdev, x, y, w, h); |
| 3540 | |
| 3541 | wake_up(&dsi.waitqueue); |
| 3542 | |
| 3543 | end: |
| 3544 | mutex_unlock(&dsi.lock); |
| 3545 | |
| 3546 | return r; |
| 3547 | } |
| 3548 | |
| 3549 | static int dsi_display_sync(struct omap_dss_device *dssdev) |
| 3550 | { |
| 3551 | bool wait; |
| 3552 | |
| 3553 | DSSDBG("dsi_display_sync()\n"); |
| 3554 | |
| 3555 | mutex_lock(&dsi.lock); |
| 3556 | dsi_bus_lock(); |
| 3557 | |
| 3558 | if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && |
| 3559 | dsi.update_region.dirty) { |
| 3560 | INIT_COMPLETION(dsi.update_completion); |
| 3561 | wait = true; |
| 3562 | } else { |
| 3563 | wait = false; |
| 3564 | } |
| 3565 | |
| 3566 | dsi_bus_unlock(); |
| 3567 | mutex_unlock(&dsi.lock); |
| 3568 | |
| 3569 | if (wait) |
| 3570 | wait_for_completion_interruptible(&dsi.update_completion); |
| 3571 | |
| 3572 | DSSDBG("dsi_display_sync() done\n"); |
| 3573 | return 0; |
| 3574 | } |
| 3575 | |
| 3576 | static int dsi_display_set_update_mode(struct omap_dss_device *dssdev, |
| 3577 | enum omap_dss_update_mode mode) |
| 3578 | { |
| 3579 | int r = 0; |
| 3580 | |
| 3581 | DSSDBGF("%d", mode); |
| 3582 | |
| 3583 | mutex_lock(&dsi.lock); |
| 3584 | dsi_bus_lock(); |
| 3585 | |
| 3586 | dsi.user_update_mode = mode; |
| 3587 | r = dsi_set_update_mode(dssdev, mode); |
| 3588 | |
| 3589 | dsi_bus_unlock(); |
| 3590 | mutex_unlock(&dsi.lock); |
| 3591 | |
| 3592 | return r; |
| 3593 | } |
| 3594 | |
| 3595 | static enum omap_dss_update_mode dsi_display_get_update_mode( |
| 3596 | struct omap_dss_device *dssdev) |
| 3597 | { |
| 3598 | return dsi.update_mode; |
| 3599 | } |
| 3600 | |
| 3601 | |
| 3602 | static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable) |
| 3603 | { |
| 3604 | int r = 0; |
| 3605 | |
| 3606 | DSSDBGF("%d", enable); |
| 3607 | |
| 3608 | if (!dssdev->driver->enable_te) |
| 3609 | return -ENOENT; |
| 3610 | |
| 3611 | dsi_bus_lock(); |
| 3612 | |
| 3613 | dsi.te_enabled = enable; |
| 3614 | |
| 3615 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| 3616 | goto end; |
| 3617 | |
| 3618 | r = dsi_set_te(dssdev, enable); |
| 3619 | end: |
| 3620 | dsi_bus_unlock(); |
| 3621 | |
| 3622 | return r; |
| 3623 | } |
| 3624 | |
| 3625 | static int dsi_display_get_te(struct omap_dss_device *dssdev) |
| 3626 | { |
| 3627 | return dsi.te_enabled; |
| 3628 | } |
| 3629 | |
| 3630 | static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate) |
| 3631 | { |
| 3632 | |
| 3633 | DSSDBGF("%d", rotate); |
| 3634 | |
| 3635 | if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) |
| 3636 | return -EINVAL; |
| 3637 | |
| 3638 | dsi_bus_lock(); |
| 3639 | dssdev->driver->set_rotate(dssdev, rotate); |
| 3640 | if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { |
| 3641 | u16 w, h; |
| 3642 | /* the display dimensions may have changed, so set a new |
| 3643 | * update region */ |
| 3644 | dssdev->get_resolution(dssdev, &w, &h); |
| 3645 | dsi_set_update_region(dssdev, 0, 0, w, h); |
| 3646 | } |
| 3647 | dsi_bus_unlock(); |
| 3648 | |
| 3649 | return 0; |
| 3650 | } |
| 3651 | |
| 3652 | static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev) |
| 3653 | { |
| 3654 | if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) |
| 3655 | return 0; |
| 3656 | |
| 3657 | return dssdev->driver->get_rotate(dssdev); |
| 3658 | } |
| 3659 | |
| 3660 | static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror) |
| 3661 | { |
| 3662 | DSSDBGF("%d", mirror); |
| 3663 | |
| 3664 | if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) |
| 3665 | return -EINVAL; |
| 3666 | |
| 3667 | dsi_bus_lock(); |
| 3668 | dssdev->driver->set_mirror(dssdev, mirror); |
| 3669 | dsi_bus_unlock(); |
| 3670 | |
| 3671 | return 0; |
| 3672 | } |
| 3673 | |
| 3674 | static bool dsi_display_get_mirror(struct omap_dss_device *dssdev) |
| 3675 | { |
| 3676 | if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) |
| 3677 | return 0; |
| 3678 | |
| 3679 | return dssdev->driver->get_mirror(dssdev); |
| 3680 | } |
| 3681 | |
| 3682 | static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num) |
| 3683 | { |
| 3684 | int r; |
| 3685 | |
| 3686 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| 3687 | return -EIO; |
| 3688 | |
| 3689 | DSSDBGF("%d", test_num); |
| 3690 | |
| 3691 | dsi_bus_lock(); |
| 3692 | |
| 3693 | /* run test first in low speed mode */ |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 3694 | omapdss_dsi_vc_enable_hs(0, 0); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3695 | |
| 3696 | if (dssdev->driver->run_test) { |
| 3697 | r = dssdev->driver->run_test(dssdev, test_num); |
| 3698 | if (r) |
| 3699 | goto end; |
| 3700 | } |
| 3701 | |
| 3702 | /* then in high speed */ |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 3703 | omapdss_dsi_vc_enable_hs(0, 1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3704 | |
| 3705 | if (dssdev->driver->run_test) { |
| 3706 | r = dssdev->driver->run_test(dssdev, test_num); |
| 3707 | if (r) |
| 3708 | goto end; |
| 3709 | } |
| 3710 | |
| 3711 | end: |
Tomi Valkeinen | 61140c9 | 2010-01-12 16:00:30 +0200 | [diff] [blame^] | 3712 | omapdss_dsi_vc_enable_hs(0, 1); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3713 | |
| 3714 | dsi_bus_unlock(); |
| 3715 | |
| 3716 | return r; |
| 3717 | } |
| 3718 | |
| 3719 | static int dsi_display_memory_read(struct omap_dss_device *dssdev, |
| 3720 | void *buf, size_t size, |
| 3721 | u16 x, u16 y, u16 w, u16 h) |
| 3722 | { |
| 3723 | int r; |
| 3724 | |
| 3725 | DSSDBGF(""); |
| 3726 | |
| 3727 | if (!dssdev->driver->memory_read) |
| 3728 | return -EINVAL; |
| 3729 | |
| 3730 | if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| 3731 | return -EIO; |
| 3732 | |
| 3733 | dsi_bus_lock(); |
| 3734 | |
| 3735 | r = dssdev->driver->memory_read(dssdev, buf, size, |
| 3736 | x, y, w, h); |
| 3737 | |
| 3738 | /* Memory read usually changes the update area. This will |
| 3739 | * force the next update to re-set the update area */ |
| 3740 | dsi.active_update_region.dirty = true; |
| 3741 | |
| 3742 | dsi_bus_unlock(); |
| 3743 | |
| 3744 | return r; |
| 3745 | } |
| 3746 | |
| 3747 | void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, |
| 3748 | u32 fifo_size, enum omap_burst_size *burst_size, |
| 3749 | u32 *fifo_low, u32 *fifo_high) |
| 3750 | { |
| 3751 | unsigned burst_size_bytes; |
| 3752 | |
| 3753 | *burst_size = OMAP_DSS_BURST_16x32; |
| 3754 | burst_size_bytes = 16 * 32 / 8; |
| 3755 | |
| 3756 | *fifo_high = fifo_size - burst_size_bytes; |
| 3757 | *fifo_low = fifo_size - burst_size_bytes * 8; |
| 3758 | } |
| 3759 | |
| 3760 | int dsi_init_display(struct omap_dss_device *dssdev) |
| 3761 | { |
| 3762 | DSSDBG("DSI init\n"); |
| 3763 | |
| 3764 | dssdev->enable = dsi_display_enable; |
| 3765 | dssdev->disable = dsi_display_disable; |
| 3766 | dssdev->suspend = dsi_display_suspend; |
| 3767 | dssdev->resume = dsi_display_resume; |
| 3768 | dssdev->update = dsi_display_update; |
| 3769 | dssdev->sync = dsi_display_sync; |
| 3770 | dssdev->set_update_mode = dsi_display_set_update_mode; |
| 3771 | dssdev->get_update_mode = dsi_display_get_update_mode; |
| 3772 | dssdev->enable_te = dsi_display_enable_te; |
| 3773 | dssdev->get_te = dsi_display_get_te; |
| 3774 | |
| 3775 | dssdev->get_rotate = dsi_display_get_rotate; |
| 3776 | dssdev->set_rotate = dsi_display_set_rotate; |
| 3777 | |
| 3778 | dssdev->get_mirror = dsi_display_get_mirror; |
| 3779 | dssdev->set_mirror = dsi_display_set_mirror; |
| 3780 | |
| 3781 | dssdev->run_test = dsi_display_run_test; |
| 3782 | dssdev->memory_read = dsi_display_memory_read; |
| 3783 | |
| 3784 | /* XXX these should be figured out dynamically */ |
| 3785 | dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | |
| 3786 | OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; |
| 3787 | |
| 3788 | dsi.vc[0].dssdev = dssdev; |
| 3789 | dsi.vc[1].dssdev = dssdev; |
| 3790 | |
| 3791 | return 0; |
| 3792 | } |
| 3793 | |
| 3794 | int dsi_init(struct platform_device *pdev) |
| 3795 | { |
| 3796 | u32 rev; |
| 3797 | int r; |
| 3798 | struct sched_param param = { |
| 3799 | .sched_priority = MAX_USER_RT_PRIO-1 |
| 3800 | }; |
| 3801 | |
| 3802 | spin_lock_init(&dsi.errors_lock); |
| 3803 | dsi.errors = 0; |
| 3804 | |
Tomi Valkeinen | dfc0fd8 | 2009-12-17 14:35:21 +0200 | [diff] [blame] | 3805 | #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| 3806 | spin_lock_init(&dsi.irq_stats_lock); |
| 3807 | dsi.irq_stats.last_reset = jiffies; |
| 3808 | #endif |
| 3809 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3810 | init_completion(&dsi.bta_completion); |
| 3811 | init_completion(&dsi.update_completion); |
| 3812 | |
| 3813 | dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi"); |
| 3814 | if (IS_ERR(dsi.thread)) { |
| 3815 | DSSERR("cannot create kthread\n"); |
| 3816 | r = PTR_ERR(dsi.thread); |
| 3817 | goto err0; |
| 3818 | } |
| 3819 | sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m); |
| 3820 | |
| 3821 | init_waitqueue_head(&dsi.waitqueue); |
| 3822 | spin_lock_init(&dsi.update_lock); |
| 3823 | |
| 3824 | mutex_init(&dsi.lock); |
| 3825 | mutex_init(&dsi.bus_lock); |
| 3826 | |
| 3827 | #ifdef DSI_CATCH_MISSING_TE |
| 3828 | init_timer(&dsi.te_timer); |
| 3829 | dsi.te_timer.function = dsi_te_timeout; |
| 3830 | dsi.te_timer.data = 0; |
| 3831 | #endif |
| 3832 | |
| 3833 | dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; |
| 3834 | dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; |
| 3835 | |
| 3836 | dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); |
| 3837 | if (!dsi.base) { |
| 3838 | DSSERR("can't ioremap DSI\n"); |
| 3839 | r = -ENOMEM; |
| 3840 | goto err1; |
| 3841 | } |
| 3842 | |
Tomi Valkeinen | 8a2cfea | 2010-02-04 17:03:41 +0200 | [diff] [blame] | 3843 | dsi.vdds_dsi_reg = dss_get_vdds_dsi(); |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3844 | if (IS_ERR(dsi.vdds_dsi_reg)) { |
| 3845 | iounmap(dsi.base); |
| 3846 | DSSERR("can't get VDDS_DSI regulator\n"); |
| 3847 | r = PTR_ERR(dsi.vdds_dsi_reg); |
| 3848 | goto err2; |
| 3849 | } |
| 3850 | |
| 3851 | enable_clocks(1); |
| 3852 | |
| 3853 | rev = dsi_read_reg(DSI_REVISION); |
| 3854 | printk(KERN_INFO "OMAP DSI rev %d.%d\n", |
| 3855 | FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| 3856 | |
| 3857 | enable_clocks(0); |
| 3858 | |
| 3859 | wake_up_process(dsi.thread); |
| 3860 | |
| 3861 | return 0; |
| 3862 | err2: |
| 3863 | iounmap(dsi.base); |
| 3864 | err1: |
| 3865 | kthread_stop(dsi.thread); |
| 3866 | err0: |
| 3867 | return r; |
| 3868 | } |
| 3869 | |
| 3870 | void dsi_exit(void) |
| 3871 | { |
| 3872 | kthread_stop(dsi.thread); |
| 3873 | |
Tomi Valkeinen | 3de7a1d | 2009-10-28 11:59:56 +0200 | [diff] [blame] | 3874 | iounmap(dsi.base); |
| 3875 | |
| 3876 | DSSDBG("omap_dsi_exit\n"); |
| 3877 | } |
| 3878 | |