blob: 0b930da5d47d884fc57e3f4067005a5d9cdf8e82 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n";
2/*
3 * de600.c
4 *
5 * Linux driver for the D-Link DE-600 Ethernet pocket adapter.
6 *
7 * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall
8 * The Author may be reached as bj0rn@blox.se
9 *
10 * Based on adapter information gathered from DE600.ASM by D-Link Inc.,
11 * as included on disk C in the v.2.11 of PC/TCP from FTP Software.
12 * For DE600.asm:
13 * Portions (C) Copyright 1990 D-Link, Inc.
14 * Copyright, 1988-1992, Russell Nelson, Crynwr Software
15 *
16 * Adapted to the sample network driver core for linux,
17 * written by: Donald Becker <becker@super.org>
18 * (Now at <becker@scyld.com>)
19 *
20 **************************************************************/
21/*
22 * This program is free software; you can redistribute it and/or modify
23 * it under the terms of the GNU General Public License as published by
24 * the Free Software Foundation; either version 2, or (at your option)
25 * any later version.
26 *
27 * This program is distributed in the hope that it will be useful,
28 * but WITHOUT ANY WARRANTY; without even the implied warranty of
29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
30 * GNU General Public License for more details.
31 *
32 * You should have received a copy of the GNU General Public License
33 * along with this program; if not, write to the Free Software
34 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
35 *
36 **************************************************************/
37
38/* Add more time here if your adapter won't work OK: */
39#define DE600_SLOW_DOWN udelay(delay_time)
40
41 /*
42 * If you still have trouble reading/writing to the adapter,
43 * modify the following "#define": (see <asm/io.h> for more info)
44#define REALLY_SLOW_IO
45 */
46#define SLOW_IO_BY_JUMPING /* Looks "better" than dummy write to port 0x80 :-) */
47
48/* use 0 for production, 1 for verification, >2 for debug */
49#ifdef DE600_DEBUG
50#define PRINTK(x) if (de600_debug >= 2) printk x
51#else
52#define DE600_DEBUG 0
53#define PRINTK(x) /**/
54#endif
55
56#include <linux/module.h>
57#include <linux/kernel.h>
58#include <linux/types.h>
59#include <linux/fcntl.h>
60#include <linux/string.h>
61#include <linux/interrupt.h>
62#include <linux/ioport.h>
63#include <linux/in.h>
64#include <asm/system.h>
65#include <linux/errno.h>
66#include <linux/init.h>
67#include <linux/delay.h>
68#include <linux/inet.h>
69#include <linux/netdevice.h>
70#include <linux/etherdevice.h>
71#include <linux/skbuff.h>
72
73#include <asm/io.h>
74
75#include "de600.h"
76
77static unsigned int de600_debug = DE600_DEBUG;
78module_param(de600_debug, int, 0);
79MODULE_PARM_DESC(de600_debug, "DE-600 debug level (0-2)");
80
81static unsigned int check_lost = 1;
82module_param(check_lost, bool, 0);
83MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
84
85static unsigned int delay_time = 10;
86module_param(delay_time, int, 0);
87MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds");
88
89
90/*
91 * D-Link driver variables:
92 */
93
94static volatile int rx_page;
95
96#define TX_PAGES 2
97static volatile int tx_fifo[TX_PAGES];
98static volatile int tx_fifo_in;
99static volatile int tx_fifo_out;
100static volatile int free_tx_pages = TX_PAGES;
101static int was_down;
102static DEFINE_SPINLOCK(de600_lock);
103
104static inline u8 de600_read_status(struct net_device *dev)
105{
106 u8 status;
107
108 outb_p(STATUS, DATA_PORT);
109 status = inb(STATUS_PORT);
110 outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);
111
112 return status;
113}
114
115static inline u8 de600_read_byte(unsigned char type, struct net_device *dev)
116{
117 /* dev used by macros */
118 u8 lo;
119 outb_p((type), DATA_PORT);
120 lo = ((unsigned char)inb(STATUS_PORT)) >> 4;
121 outb_p((type) | HI_NIBBLE, DATA_PORT);
122 return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;
123}
124
125/*
126 * Open/initialize the board. This is called (in the current kernel)
127 * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).
128 *
129 * This routine should set everything up anew at each open, even
130 * registers that "should" only need to be set once at boot, so that
131 * there is a non-reboot way to recover if something goes wrong.
132 */
133
134static int de600_open(struct net_device *dev)
135{
136 unsigned long flags;
137 int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev);
138 if (ret) {
139 printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
140 return ret;
141 }
142 spin_lock_irqsave(&de600_lock, flags);
143 ret = adapter_init(dev);
144 spin_unlock_irqrestore(&de600_lock, flags);
145 return ret;
146}
147
148/*
149 * The inverse routine to de600_open().
150 */
151
152static int de600_close(struct net_device *dev)
153{
154 select_nic();
155 rx_page = 0;
156 de600_put_command(RESET);
157 de600_put_command(STOP_RESET);
158 de600_put_command(0);
159 select_prn();
160 free_irq(DE600_IRQ, dev);
161 return 0;
162}
163
164static struct net_device_stats *get_stats(struct net_device *dev)
165{
166 return (struct net_device_stats *)(dev->priv);
167}
168
169static inline void trigger_interrupt(struct net_device *dev)
170{
171 de600_put_command(FLIP_IRQ);
172 select_prn();
173 DE600_SLOW_DOWN;
174 select_nic();
175 de600_put_command(0);
176}
177
178/*
179 * Copy a buffer to the adapter transmit page memory.
180 * Start sending.
181 */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400182
Linus Torvalds1da177e2005-04-16 15:20:36 -0700183static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
184{
185 unsigned long flags;
186 int transmit_from;
187 int len;
188 int tickssofar;
189 u8 *buffer = skb->data;
190 int i;
191
192 if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
193 tickssofar = jiffies - dev->trans_start;
194 if (tickssofar < 5)
195 return 1;
196 /* else */
197 printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
198 /* Restart the adapter. */
199 spin_lock_irqsave(&de600_lock, flags);
200 if (adapter_init(dev)) {
201 spin_unlock_irqrestore(&de600_lock, flags);
202 return 1;
203 }
204 spin_unlock_irqrestore(&de600_lock, flags);
205 }
206
207 /* Start real output */
208 PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
209
210 if ((len = skb->len) < RUNT)
211 len = RUNT;
212
213 spin_lock_irqsave(&de600_lock, flags);
214 select_nic();
215 tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
216 tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
217
218 if(check_lost)
219 {
220 /* This costs about 40 instructions per packet... */
221 de600_setup_address(NODE_ADDRESS, RW_ADDR);
222 de600_read_byte(READ_DATA, dev);
223 if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
224 if (adapter_init(dev)) {
225 spin_unlock_irqrestore(&de600_lock, flags);
226 return 1;
227 }
228 }
229 }
230
231 de600_setup_address(transmit_from, RW_ADDR);
232 for (i = 0; i < skb->len ; ++i, ++buffer)
233 de600_put_byte(*buffer);
234 for (; i < len; ++i)
235 de600_put_byte(0);
236
237 if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
238 dev->trans_start = jiffies;
239 netif_start_queue(dev); /* allow more packets into adapter */
240 /* Send page and generate a faked interrupt */
241 de600_setup_address(transmit_from, TX_ADDR);
242 de600_put_command(TX_ENABLE);
243 }
244 else {
245 if (free_tx_pages)
246 netif_start_queue(dev);
247 else
248 netif_stop_queue(dev);
249 select_prn();
250 }
251 spin_unlock_irqrestore(&de600_lock, flags);
252 dev_kfree_skb(skb);
253 return 0;
254}
255
256/*
257 * The typical workload of the driver:
258 * Handle the network interface interrupts.
259 */
260
261static irqreturn_t de600_interrupt(int irq, void *dev_id, struct pt_regs * regs)
262{
263 struct net_device *dev = dev_id;
264 u8 irq_status;
265 int retrig = 0;
266 int boguscount = 0;
267
268 /* This might just as well be deleted now, no crummy drivers present :-) */
269 if ((dev == NULL) || (DE600_IRQ != irq)) {
270 printk(KERN_ERR "%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);
271 return IRQ_NONE;
272 }
273
274 spin_lock(&de600_lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400275
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276 select_nic();
277 irq_status = de600_read_status(dev);
278
279 do {
280 PRINTK(("de600_interrupt (%02X)\n", irq_status));
281
282 if (irq_status & RX_GOOD)
283 de600_rx_intr(dev);
284 else if (!(irq_status & RX_BUSY))
285 de600_put_command(RX_ENABLE);
286
287 /* Any transmission in progress? */
288 if (free_tx_pages < TX_PAGES)
289 retrig = de600_tx_intr(dev, irq_status);
290 else
291 retrig = 0;
292
293 irq_status = de600_read_status(dev);
294 } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );
295 /*
296 * Yeah, it _looks_ like busy waiting, smells like busy waiting
297 * and I know it's not PC, but please, it will only occur once
298 * in a while and then only for a loop or so (< 1ms for sure!)
299 */
300
301 /* Enable adapter interrupts */
302 select_prn();
303 if (retrig)
304 trigger_interrupt(dev);
305 spin_unlock(&de600_lock);
306 return IRQ_HANDLED;
307}
308
309static int de600_tx_intr(struct net_device *dev, int irq_status)
310{
311 /*
312 * Returns 1 if tx still not done
313 */
314
315 /* Check if current transmission is done yet */
316 if (irq_status & TX_BUSY)
317 return 1; /* tx not done, try again */
318
319 /* else */
320 /* If last transmission OK then bump fifo index */
321 if (!(irq_status & TX_FAILED16)) {
322 tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
323 ++free_tx_pages;
324 ((struct net_device_stats *)(dev->priv))->tx_packets++;
325 netif_wake_queue(dev);
326 }
327
328 /* More to send, or resend last packet? */
329 if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {
330 dev->trans_start = jiffies;
331 de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);
332 de600_put_command(TX_ENABLE);
333 return 1;
334 }
335 /* else */
336
337 return 0;
338}
339
340/*
341 * We have a good packet, get it out of the adapter.
342 */
343static void de600_rx_intr(struct net_device *dev)
344{
345 struct sk_buff *skb;
346 int i;
347 int read_from;
348 int size;
349 unsigned char *buffer;
350
351 /* Get size of received packet */
352 size = de600_read_byte(RX_LEN, dev); /* low byte */
353 size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */
354 size -= 4; /* Ignore trailing 4 CRC-bytes */
355
356 /* Tell adapter where to store next incoming packet, enable receiver */
357 read_from = rx_page_adr();
358 next_rx_page();
359 de600_put_command(RX_ENABLE);
360
361 if ((size < 32) || (size > 1535)) {
362 printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
363 if (size > 10000)
364 adapter_init(dev);
365 return;
366 }
367
368 skb = dev_alloc_skb(size+2);
369 if (skb == NULL) {
370 printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
371 return;
372 }
373 /* else */
374
375 skb->dev = dev;
376 skb_reserve(skb,2); /* Align */
377
378 /* 'skb->data' points to the start of sk_buff data area. */
379 buffer = skb_put(skb,size);
380
381 /* copy the packet into the buffer */
382 de600_setup_address(read_from, RW_ADDR);
383 for (i = size; i > 0; --i, ++buffer)
384 *buffer = de600_read_byte(READ_DATA, dev);
385
386 skb->protocol=eth_type_trans(skb,dev);
387
388 netif_rx(skb);
389
390 /* update stats */
391 dev->last_rx = jiffies;
392 ((struct net_device_stats *)(dev->priv))->rx_packets++; /* count all receives */
393 ((struct net_device_stats *)(dev->priv))->rx_bytes += size; /* count all received bytes */
394
395 /*
396 * If any worth-while packets have been received, netif_rx()
397 * will work on them when we get to the tasklets.
398 */
399}
400
401static struct net_device * __init de600_probe(void)
402{
403 int i;
404 struct net_device *dev;
405 int err;
406
407 dev = alloc_etherdev(sizeof(struct net_device_stats));
408 if (!dev)
409 return ERR_PTR(-ENOMEM);
410
411 SET_MODULE_OWNER(dev);
412
413 if (!request_region(DE600_IO, 3, "de600")) {
414 printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
415 err = -EBUSY;
416 goto out;
417 }
418
419 printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
420 /* Alpha testers must have the version number to report bugs. */
421 if (de600_debug > 1)
422 printk(version);
423
424 /* probe for adapter */
425 err = -ENODEV;
426 rx_page = 0;
427 select_nic();
428 (void)de600_read_status(dev);
429 de600_put_command(RESET);
430 de600_put_command(STOP_RESET);
431 if (de600_read_status(dev) & 0xf0) {
432 printk(": not at I/O %#3x.\n", DATA_PORT);
433 goto out1;
434 }
435
436 /*
437 * Maybe we found one,
438 * have to check if it is a D-Link DE-600 adapter...
439 */
440
441 /* Get the adapter ethernet address from the ROM */
442 de600_setup_address(NODE_ADDRESS, RW_ADDR);
443 for (i = 0; i < ETH_ALEN; i++) {
444 dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
445 dev->broadcast[i] = 0xff;
446 }
447
448 /* Check magic code */
449 if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
450 /* OK, install real address */
451 dev->dev_addr[0] = 0x00;
452 dev->dev_addr[1] = 0x80;
453 dev->dev_addr[2] = 0xc8;
454 dev->dev_addr[3] &= 0x0f;
455 dev->dev_addr[3] |= 0x70;
456 } else {
457 printk(" not identified in the printer port\n");
458 goto out1;
459 }
460
461 printk(", Ethernet Address: %02X", dev->dev_addr[0]);
462 for (i = 1; i < ETH_ALEN; i++)
463 printk(":%02X",dev->dev_addr[i]);
464 printk("\n");
465
466 dev->get_stats = get_stats;
467
468 dev->open = de600_open;
469 dev->stop = de600_close;
470 dev->hard_start_xmit = &de600_start_xmit;
471
472 dev->flags&=~IFF_MULTICAST;
473
474 select_prn();
475
476 err = register_netdev(dev);
477 if (err)
478 goto out1;
479
480 return dev;
481
482out1:
483 release_region(DE600_IO, 3);
484out:
485 free_netdev(dev);
486 return ERR_PTR(err);
487}
488
489static int adapter_init(struct net_device *dev)
490{
491 int i;
492
493 select_nic();
494 rx_page = 0; /* used by RESET */
495 de600_put_command(RESET);
496 de600_put_command(STOP_RESET);
497
498 /* Check if it is still there... */
499 /* Get the some bytes of the adapter ethernet address from the ROM */
500 de600_setup_address(NODE_ADDRESS, RW_ADDR);
501 de600_read_byte(READ_DATA, dev);
502 if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
503 (de600_read_byte(READ_DATA, dev) != 0x15)) {
504 /* was: if (de600_read_status(dev) & 0xf0) { */
505 printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n");
506 /* Goodbye, cruel world... */
507 dev->flags &= ~IFF_UP;
508 de600_close(dev);
509 was_down = 1;
510 netif_stop_queue(dev); /* Transmit busy... */
511 return 1; /* failed */
512 }
513
514 if (was_down) {
515 printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
516 was_down = 0;
517 }
518
519 tx_fifo_in = 0;
520 tx_fifo_out = 0;
521 free_tx_pages = TX_PAGES;
522
523
524 /* set the ether address. */
525 de600_setup_address(NODE_ADDRESS, RW_ADDR);
526 for (i = 0; i < ETH_ALEN; i++)
527 de600_put_byte(dev->dev_addr[i]);
528
529 /* where to start saving incoming packets */
530 rx_page = RX_BP | RX_BASE_PAGE;
531 de600_setup_address(MEM_4K, RW_ADDR);
532 /* Enable receiver */
533 de600_put_command(RX_ENABLE);
534 select_prn();
535
536 netif_start_queue(dev);
537
538 return 0; /* OK */
539}
540
541static struct net_device *de600_dev;
542
543static int __init de600_init(void)
544{
545 de600_dev = de600_probe();
546 if (IS_ERR(de600_dev))
547 return PTR_ERR(de600_dev);
548 return 0;
549}
550
551static void __exit de600_exit(void)
552{
553 unregister_netdev(de600_dev);
554 release_region(DE600_IO, 3);
555 free_netdev(de600_dev);
556}
557
558module_init(de600_init);
559module_exit(de600_exit);
560
561MODULE_LICENSE("GPL");