Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 1 | /* |
| 2 | * pata-cs5535.c - CS5535 PATA for new ATA layer |
| 3 | * (C) 2005-2006 Red Hat Inc |
| 4 | * Alan Cox <alan@redhat.com> |
| 5 | * |
| 6 | * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and |
| 7 | * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de |
| 8 | * and Alexander Kiausch <alex.kiausch@t-online.de> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 22 | * |
| 23 | * Loosely based on the piix & svwks drivers. |
| 24 | * |
| 25 | * Documentation: |
| 26 | * Available from AMD web site. |
| 27 | * TODO |
Robert P. J. Day | 3a4fa0a | 2007-10-19 23:10:43 +0200 | [diff] [blame] | 28 | * Review errata to see if serializing is necessary |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 29 | */ |
| 30 | |
| 31 | #include <linux/kernel.h> |
| 32 | #include <linux/module.h> |
| 33 | #include <linux/pci.h> |
| 34 | #include <linux/init.h> |
| 35 | #include <linux/blkdev.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <scsi/scsi_host.h> |
| 38 | #include <linux/libata.h> |
| 39 | #include <asm/msr.h> |
| 40 | |
| 41 | #define DRV_NAME "cs5535" |
Jeff Garzik | 8bc3fc4 | 2007-05-21 20:26:38 -0400 | [diff] [blame] | 42 | #define DRV_VERSION "0.2.12" |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 43 | |
| 44 | /* |
| 45 | * The Geode (Aka Athlon GX now) uses an internal MSR based |
| 46 | * bus system for control. Demented but there you go. |
| 47 | */ |
| 48 | |
| 49 | #define MSR_ATAC_BASE 0x51300000 |
| 50 | #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) |
| 51 | #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) |
| 52 | #define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) |
| 53 | #define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) |
| 54 | #define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) |
| 55 | #define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) |
| 56 | #define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) |
| 57 | #define ATAC_RESET (MSR_ATAC_BASE+0x10) |
| 58 | #define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) |
| 59 | #define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) |
| 60 | #define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) |
| 61 | #define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) |
| 62 | #define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) |
| 63 | |
| 64 | #define ATAC_BM0_CMD_PRIM 0x00 |
| 65 | #define ATAC_BM0_STS_PRIM 0x02 |
| 66 | #define ATAC_BM0_PRD 0x04 |
| 67 | |
| 68 | #define CS5535_CABLE_DETECT 0x48 |
| 69 | |
| 70 | #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 ) |
| 71 | |
| 72 | /** |
Alan Cox | eb4a2c7 | 2007-04-11 00:04:20 +0100 | [diff] [blame] | 73 | * cs5535_cable_detect - detect cable type |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 74 | * @ap: Port to detect on |
Tejun Heo | d4b2bab | 2007-02-02 16:50:52 +0900 | [diff] [blame] | 75 | * @deadline: deadline jiffies for the operation |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 76 | * |
| 77 | * Perform cable detection for ATA66 capable cable. Return a libata |
| 78 | * cable type. |
| 79 | */ |
| 80 | |
Alan Cox | eb4a2c7 | 2007-04-11 00:04:20 +0100 | [diff] [blame] | 81 | static int cs5535_cable_detect(struct ata_port *ap) |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 82 | { |
| 83 | u8 cable; |
| 84 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| 85 | |
| 86 | pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); |
| 87 | if (cable & 1) |
Alan Cox | eb4a2c7 | 2007-04-11 00:04:20 +0100 | [diff] [blame] | 88 | return ATA_CBL_PATA80; |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 89 | else |
Alan Cox | eb4a2c7 | 2007-04-11 00:04:20 +0100 | [diff] [blame] | 90 | return ATA_CBL_PATA40; |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 91 | } |
| 92 | |
| 93 | /** |
| 94 | * cs5535_set_piomode - PIO setup |
| 95 | * @ap: ATA interface |
| 96 | * @adev: device on the interface |
| 97 | * |
| 98 | * Set our PIO requirements. The CS5535 is pretty clean about all this |
| 99 | */ |
| 100 | |
| 101 | static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) |
| 102 | { |
| 103 | static const u16 pio_timings[5] = { |
| 104 | 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 |
| 105 | }; |
| 106 | static const u16 pio_cmd_timings[5] = { |
| 107 | 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 |
| 108 | }; |
| 109 | u32 reg, dummy; |
| 110 | struct ata_device *pair = ata_dev_pair(adev); |
| 111 | |
| 112 | int mode = adev->pio_mode - XFER_PIO_0; |
| 113 | int cmdmode = mode; |
| 114 | |
| 115 | /* Command timing has to be for the lowest of the pair of devices */ |
| 116 | if (pair) { |
| 117 | int pairmode = pair->pio_mode - XFER_PIO_0; |
| 118 | cmdmode = min(mode, pairmode); |
| 119 | /* Write the other drive timing register if it changed */ |
| 120 | if (cmdmode < pairmode) |
| 121 | wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno, |
| 122 | pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0); |
| 123 | } |
| 124 | /* Write the drive timing register */ |
| 125 | wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno, |
| 126 | pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0); |
| 127 | |
| 128 | /* Set the PIO "format 1" bit in the DMA timing register */ |
| 129 | rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); |
| 130 | wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0); |
| 131 | } |
| 132 | |
| 133 | /** |
| 134 | * cs5535_set_dmamode - DMA timing setup |
| 135 | * @ap: ATA interface |
| 136 | * @adev: Device being configured |
| 137 | * |
| 138 | */ |
| 139 | |
| 140 | static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
| 141 | { |
| 142 | static const u32 udma_timings[5] = { |
| 143 | 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 |
| 144 | }; |
| 145 | static const u32 mwdma_timings[3] = { |
| 146 | 0x7F0FFFF3, 0x7F035352, 0x7F024241 |
| 147 | }; |
| 148 | u32 reg, dummy; |
| 149 | int mode = adev->dma_mode; |
| 150 | |
| 151 | rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy); |
| 152 | reg &= 0x80000000UL; |
| 153 | if (mode >= XFER_UDMA_0) |
| 154 | reg |= udma_timings[mode - XFER_UDMA_0]; |
| 155 | else |
| 156 | reg |= mwdma_timings[mode - XFER_MW_DMA_0]; |
| 157 | wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0); |
| 158 | } |
| 159 | |
| 160 | static struct scsi_host_template cs5535_sht = { |
Tejun Heo | 68d1d07 | 2008-03-25 12:22:49 +0900 | [diff] [blame] | 161 | ATA_BMDMA_SHT(DRV_NAME), |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 162 | }; |
| 163 | |
| 164 | static struct ata_port_operations cs5535_port_ops = { |
Tejun Heo | 029cfd6 | 2008-03-25 12:22:49 +0900 | [diff] [blame] | 165 | .inherits = &ata_bmdma_port_ops, |
| 166 | .cable_detect = cs5535_cable_detect, |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 167 | .set_piomode = cs5535_set_piomode, |
| 168 | .set_dmamode = cs5535_set_dmamode, |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 169 | }; |
| 170 | |
| 171 | /** |
| 172 | * cs5535_init_one - Initialise a CS5530 |
| 173 | * @dev: PCI device |
| 174 | * @id: Entry in match table |
| 175 | * |
| 176 | * Install a driver for the newly found CS5530 companion chip. Most of |
| 177 | * this is just housekeeping. We have to set the chip up correctly and |
| 178 | * turn off various bits of emulation magic. |
| 179 | */ |
| 180 | |
| 181 | static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| 182 | { |
Tejun Heo | 1626aeb | 2007-05-04 12:43:58 +0200 | [diff] [blame] | 183 | static const struct ata_port_info info = { |
Jeff Garzik | 1d2808f | 2007-05-28 06:59:48 -0400 | [diff] [blame] | 184 | .flags = ATA_FLAG_SLAVE_POSS, |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 185 | .pio_mask = 0x1f, |
| 186 | .mwdma_mask = 0x07, |
Jeff Garzik | bf6263a | 2007-07-09 12:16:50 -0400 | [diff] [blame] | 187 | .udma_mask = ATA_UDMA4, |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 188 | .port_ops = &cs5535_port_ops |
| 189 | }; |
Tejun Heo | 1626aeb | 2007-05-04 12:43:58 +0200 | [diff] [blame] | 190 | const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 191 | |
| 192 | u32 timings, dummy; |
| 193 | |
| 194 | /* Check the BIOS set the initial timing clock. If not set the |
| 195 | timings for PIO0 */ |
| 196 | rdmsr(ATAC_CH0D0_PIO, timings, dummy); |
| 197 | if (CS5535_BAD_PIO(timings)) |
| 198 | wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0); |
| 199 | rdmsr(ATAC_CH0D1_PIO, timings, dummy); |
| 200 | if (CS5535_BAD_PIO(timings)) |
| 201 | wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); |
Tejun Heo | 887125e | 2008-03-25 12:22:49 +0900 | [diff] [blame] | 202 | return ata_pci_init_one(dev, ppi, &cs5535_sht, NULL); |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 203 | } |
| 204 | |
Jeff Garzik | 2d2744f | 2006-09-28 20:21:59 -0400 | [diff] [blame] | 205 | static const struct pci_device_id cs5535[] = { |
| 206 | { PCI_VDEVICE(NS, 0x002D), }, |
| 207 | |
| 208 | { }, |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 209 | }; |
| 210 | |
| 211 | static struct pci_driver cs5535_pci_driver = { |
| 212 | .name = DRV_NAME, |
| 213 | .id_table = cs5535, |
| 214 | .probe = cs5535_init_one, |
Jeff Garzik | 3ac551a | 2006-12-03 07:57:21 -0500 | [diff] [blame] | 215 | .remove = ata_pci_remove_one, |
Tejun Heo | 438ac6d | 2007-03-02 17:31:26 +0900 | [diff] [blame] | 216 | #ifdef CONFIG_PM |
Alan | 30ced0f | 2006-11-22 16:57:36 +0000 | [diff] [blame] | 217 | .suspend = ata_pci_device_suspend, |
| 218 | .resume = ata_pci_device_resume, |
Tejun Heo | 438ac6d | 2007-03-02 17:31:26 +0900 | [diff] [blame] | 219 | #endif |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 220 | }; |
| 221 | |
| 222 | static int __init cs5535_init(void) |
| 223 | { |
| 224 | return pci_register_driver(&cs5535_pci_driver); |
| 225 | } |
| 226 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 227 | static void __exit cs5535_exit(void) |
| 228 | { |
| 229 | pci_unregister_driver(&cs5535_pci_driver); |
| 230 | } |
| 231 | |
Jeff Garzik | 669a5db | 2006-08-29 18:12:40 -0400 | [diff] [blame] | 232 | MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch"); |
| 233 | MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530"); |
| 234 | MODULE_LICENSE("GPL"); |
| 235 | MODULE_DEVICE_TABLE(pci, cs5535); |
| 236 | MODULE_VERSION(DRV_VERSION); |
| 237 | |
| 238 | module_init(cs5535_init); |
| 239 | module_exit(cs5535_exit); |