blob: e5c33bc98ea499df5f3ab6a61c488b717734588d [file] [log] [blame]
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +04001/*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * TI DA8xx (OMAP-L1x) Bus Glue
5 *
6 * Derived from: ohci-omap.c and ohci-s3c2410.c
7 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
8 *
9 * This file is licensed under the terms of the GNU General Public License
10 * version 2. This program is licensed "as is" without any warranty of any
11 * kind, whether express or implied.
12 */
13
14#include <linux/interrupt.h>
15#include <linux/jiffies.h>
16#include <linux/platform_device.h>
17#include <linux/clk.h>
18
19#include <mach/da8xx.h>
Arnd Bergmannec2a0832012-08-24 15:11:34 +020020#include <linux/platform_data/usb-davinci.h>
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +040021
22#ifndef CONFIG_ARCH_DAVINCI_DA8XX
23#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
24#endif
25
Sergei Shtylyov9600cbb2010-03-26 17:37:14 +030026#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +040027
28static struct clk *usb11_clk;
29static struct clk *usb20_clk;
30
31/* Over-current indicator change bitmask */
32static volatile u16 ocic_mask;
33
34static void ohci_da8xx_clock(int on)
35{
36 u32 cfgchip2;
37
38 cfgchip2 = __raw_readl(CFGCHIP2);
39 if (on) {
40 clk_enable(usb11_clk);
41
42 /*
43 * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
44 * need to enable the USB 2.0 module clocking, start its PHY,
45 * and not allow it to stop the clock during USB 2.0 suspend.
46 */
47 if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
48 clk_enable(usb20_clk);
49
50 cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
51 cfgchip2 |= CFGCHIP2_PHY_PLLON;
52 __raw_writel(cfgchip2, CFGCHIP2);
53
54 pr_info("Waiting for USB PHY clock good...\n");
55 while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
56 cpu_relax();
57 }
58
59 /* Enable USB 1.1 PHY */
60 cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
61 } else {
62 clk_disable(usb11_clk);
63 if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
64 clk_disable(usb20_clk);
65
66 /* Disable USB 1.1 PHY */
67 cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
68 }
69 __raw_writel(cfgchip2, CFGCHIP2);
70}
71
72/*
73 * Handle the port over-current indicator change.
74 */
75static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
76 unsigned port)
77{
78 ocic_mask |= 1 << port;
79
80 /* Once over-current is detected, the port needs to be powered down */
81 if (hub->get_oci(port) > 0)
82 hub->set_power(port, 0);
83}
84
85static int ohci_da8xx_init(struct usb_hcd *hcd)
86{
87 struct device *dev = hcd->self.controller;
Jingoo Hand4f09e22013-07-30 19:59:40 +090088 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +040089 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
90 int result;
91 u32 rh_a;
92
93 dev_dbg(dev, "starting USB controller\n");
94
95 ohci_da8xx_clock(1);
96
97 /*
98 * DA8xx only have 1 port connected to the pins but the HC root hub
99 * register A reports 2 ports, thus we'll have to override it...
100 */
101 ohci->num_ports = 1;
102
103 result = ohci_init(ohci);
104 if (result < 0)
105 return result;
106
107 /*
108 * Since we're providing a board-specific root hub port power control
109 * and over-current reporting, we have to override the HC root hub A
110 * register's default value, so that ohci_hub_control() could return
111 * the correct hub descriptor...
112 */
113 rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
114 if (hub->set_power) {
115 rh_a &= ~RH_A_NPS;
116 rh_a |= RH_A_PSM;
117 }
118 if (hub->get_oci) {
119 rh_a &= ~RH_A_NOCP;
120 rh_a |= RH_A_OCPM;
121 }
122 rh_a &= ~RH_A_POTPGT;
123 rh_a |= hub->potpgt << 24;
124 ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
125
126 return result;
127}
128
129static void ohci_da8xx_stop(struct usb_hcd *hcd)
130{
131 ohci_stop(hcd);
132 ohci_da8xx_clock(0);
133}
134
135static int ohci_da8xx_start(struct usb_hcd *hcd)
136{
137 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
138 int result;
139
140 result = ohci_run(ohci);
141 if (result < 0)
142 ohci_da8xx_stop(hcd);
143
144 return result;
145}
146
147/*
148 * Update the status data from the hub with the over-current indicator change.
149 */
150static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
151{
152 int length = ohci_hub_status_data(hcd, buf);
153
154 /* See if we have OCIC bit set on port 1 */
155 if (ocic_mask & (1 << 1)) {
156 dev_dbg(hcd->self.controller, "over-current indicator change "
157 "on port 1\n");
158
159 if (!length)
160 length = 1;
161
162 buf[0] |= 1 << 1;
163 }
164 return length;
165}
166
167/*
168 * Look at the control requests to the root hub and see if we need to override.
169 */
170static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
171 u16 wIndex, char *buf, u16 wLength)
172{
173 struct device *dev = hcd->self.controller;
Jingoo Hand4f09e22013-07-30 19:59:40 +0900174 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400175 int temp;
176
177 switch (typeReq) {
178 case GetPortStatus:
179 /* Check the port number */
180 if (wIndex != 1)
181 break;
182
183 dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
184
185 temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
186
187 /* The port power status (PPS) bit defaults to 1 */
188 if (hub->get_power && hub->get_power(wIndex) == 0)
189 temp &= ~RH_PS_PPS;
190
191 /* The port over-current indicator (POCI) bit is always 0 */
192 if (hub->get_oci && hub->get_oci(wIndex) > 0)
193 temp |= RH_PS_POCI;
194
195 /* The over-current indicator change (OCIC) bit is 0 too */
196 if (ocic_mask & (1 << wIndex))
197 temp |= RH_PS_OCIC;
198
199 put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
200 return 0;
201 case SetPortFeature:
202 temp = 1;
203 goto check_port;
204 case ClearPortFeature:
205 temp = 0;
206
207check_port:
208 /* Check the port number */
209 if (wIndex != 1)
210 break;
211
212 switch (wValue) {
213 case USB_PORT_FEAT_POWER:
214 dev_dbg(dev, "%sPortFeature(%u): %s\n",
215 temp ? "Set" : "Clear", wIndex, "POWER");
216
217 if (!hub->set_power)
218 return -EPIPE;
219
220 return hub->set_power(wIndex, temp) ? -EPIPE : 0;
221 case USB_PORT_FEAT_C_OVER_CURRENT:
222 dev_dbg(dev, "%sPortFeature(%u): %s\n",
223 temp ? "Set" : "Clear", wIndex,
224 "C_OVER_CURRENT");
225
226 if (temp)
227 ocic_mask |= 1 << wIndex;
228 else
229 ocic_mask &= ~(1 << wIndex);
230 return 0;
231 }
232 }
233
234 return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
235}
236
237static const struct hc_driver ohci_da8xx_hc_driver = {
238 .description = hcd_name,
239 .product_desc = "DA8xx OHCI",
240 .hcd_priv_size = sizeof(struct ohci_hcd),
241
242 /*
243 * generic hardware linkage
244 */
245 .irq = ohci_irq,
246 .flags = HCD_USB11 | HCD_MEMORY,
247
248 /*
249 * basic lifecycle operations
250 */
251 .reset = ohci_da8xx_init,
252 .start = ohci_da8xx_start,
253 .stop = ohci_da8xx_stop,
254 .shutdown = ohci_shutdown,
255
256 /*
257 * managing i/o requests and associated device resources
258 */
259 .urb_enqueue = ohci_urb_enqueue,
260 .urb_dequeue = ohci_urb_dequeue,
261 .endpoint_disable = ohci_endpoint_disable,
262
263 /*
264 * scheduling support
265 */
266 .get_frame_number = ohci_get_frame,
267
268 /*
269 * root hub support
270 */
271 .hub_status_data = ohci_da8xx_hub_status_data,
272 .hub_control = ohci_da8xx_hub_control,
273
274#ifdef CONFIG_PM
275 .bus_suspend = ohci_bus_suspend,
276 .bus_resume = ohci_bus_resume,
277#endif
278 .start_port_reset = ohci_start_port_reset,
279};
280
281/*-------------------------------------------------------------------------*/
282
283
284/**
285 * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs
286 * Context: !in_interrupt()
287 *
288 * Allocates basic resources for this USB host controller, and
289 * then invokes the start() method for the HCD associated with it
290 * through the hotplug entry's driver_data.
291 */
292static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
293 struct platform_device *pdev)
294{
Jingoo Hand4f09e22013-07-30 19:59:40 +0900295 struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400296 struct usb_hcd *hcd;
297 struct resource *mem;
298 int error, irq;
299
300 if (hub == NULL)
301 return -ENODEV;
302
Jingoo Han644db162013-12-11 16:23:39 +0900303 usb11_clk = devm_clk_get(&pdev->dev, "usb11");
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400304 if (IS_ERR(usb11_clk))
305 return PTR_ERR(usb11_clk);
306
Jingoo Han644db162013-12-11 16:23:39 +0900307 usb20_clk = devm_clk_get(&pdev->dev, "usb20");
308 if (IS_ERR(usb20_clk))
309 return PTR_ERR(usb20_clk);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400310
311 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
Jingoo Han644db162013-12-11 16:23:39 +0900312 if (!hcd)
313 return -ENOMEM;
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400314
315 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Jingoo Han644db162013-12-11 16:23:39 +0900316 hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
317 if (IS_ERR(hcd->regs)) {
318 error = PTR_ERR(hcd->regs);
319 goto err;
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400320 }
Varka Bhadram54891d72014-11-04 07:51:09 +0530321 hcd->rsrc_start = mem->start;
322 hcd->rsrc_len = resource_size(mem);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400323
324 ohci_hcd_init(hcd_to_ohci(hcd));
325
326 irq = platform_get_irq(pdev, 0);
327 if (irq < 0) {
328 error = -ENODEV;
Jingoo Han644db162013-12-11 16:23:39 +0900329 goto err;
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400330 }
Yong Zhangb5dd18d2011-09-07 16:10:52 +0800331 error = usb_add_hcd(hcd, irq, 0);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400332 if (error)
Jingoo Han644db162013-12-11 16:23:39 +0900333 goto err;
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400334
Peter Chen3c9740a2013-11-05 10:46:02 +0800335 device_wakeup_enable(hcd->self.controller);
336
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400337 if (hub->ocic_notify) {
338 error = hub->ocic_notify(ohci_da8xx_ocic_handler);
339 if (!error)
340 return 0;
341 }
342
343 usb_remove_hcd(hcd);
Jingoo Han644db162013-12-11 16:23:39 +0900344err:
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400345 usb_put_hcd(hcd);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400346 return error;
347}
348
349/**
350 * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs
351 * @dev: USB Host Controller being removed
352 * Context: !in_interrupt()
353 *
354 * Reverses the effect of usb_hcd_da8xx_probe(), first invoking
355 * the HCD's stop() method. It is always called from a thread
356 * context, normally "rmmod", "apmd", or something similar.
357 */
358static inline void
359usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
360{
Jingoo Hand4f09e22013-07-30 19:59:40 +0900361 struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400362
363 hub->ocic_notify(NULL);
364 usb_remove_hcd(hcd);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400365 usb_put_hcd(hcd);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400366}
367
368static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev)
369{
370 return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev);
371}
372
373static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev)
374{
375 struct usb_hcd *hcd = platform_get_drvdata(dev);
376
377 usb_hcd_da8xx_remove(hcd, dev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400378
379 return 0;
380}
381
382#ifdef CONFIG_PM
Majunath Goudar933bb1f2013-11-13 17:40:19 +0530383static int ohci_da8xx_suspend(struct platform_device *pdev,
384 pm_message_t message)
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400385{
Majunath Goudar933bb1f2013-11-13 17:40:19 +0530386 struct usb_hcd *hcd = platform_get_drvdata(pdev);
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400387 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
Majunath Goudar933bb1f2013-11-13 17:40:19 +0530388 bool do_wakeup = device_may_wakeup(&pdev->dev);
389 int ret;
390
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400391
392 if (time_before(jiffies, ohci->next_statechange))
393 msleep(5);
394 ohci->next_statechange = jiffies;
395
Majunath Goudar933bb1f2013-11-13 17:40:19 +0530396 ret = ohci_suspend(hcd, do_wakeup);
397 if (ret)
398 return ret;
399
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400400 ohci_da8xx_clock(0);
401 hcd->state = HC_STATE_SUSPENDED;
Majunath Goudar933bb1f2013-11-13 17:40:19 +0530402
403 return ret;
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400404}
405
406static int ohci_da8xx_resume(struct platform_device *dev)
407{
408 struct usb_hcd *hcd = platform_get_drvdata(dev);
409 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
410
411 if (time_before(jiffies, ohci->next_statechange))
412 msleep(5);
413 ohci->next_statechange = jiffies;
414
415 ohci_da8xx_clock(1);
416 dev->dev.power.power_state = PMSG_ON;
417 usb_hcd_resume_root_hub(hcd);
418 return 0;
419}
420#endif
421
422/*
423 * Driver definition to register with platform structure.
424 */
425static struct platform_driver ohci_hcd_da8xx_driver = {
426 .probe = ohci_hcd_da8xx_drv_probe,
427 .remove = ohci_hcd_da8xx_drv_remove,
428 .shutdown = usb_hcd_platform_shutdown,
429#ifdef CONFIG_PM
430 .suspend = ohci_da8xx_suspend,
431 .resume = ohci_da8xx_resume,
432#endif
433 .driver = {
Sergei Shtylyovefe7daf2010-02-12 23:52:34 +0400434 .name = "ohci",
435 },
436};
Jan Luebbeab59ac012012-05-07 10:25:16 +0200437
438MODULE_ALIAS("platform:ohci");