blob: eea81729651309b0598791d04778822e1f7cc7ff [file] [log] [blame]
Tomaz Merteljb5430a02010-01-08 14:43:04 -08001/*
Guenter Roeckca3c7b62012-01-19 11:02:15 -08002 * amc6821.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
5 *
6 * Based on max6650.c:
7 * Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
Tomaz Merteljb5430a02010-01-08 14:43:04 -080023
24
25#include <linux/kernel.h> /* Needed for KERN_INFO */
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/jiffies.h>
30#include <linux/i2c.h>
31#include <linux/hwmon.h>
32#include <linux/hwmon-sysfs.h>
33#include <linux/err.h>
34#include <linux/mutex.h>
35
36
37/*
38 * Addresses to scan.
39 */
40
41static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
42 0x4c, 0x4d, 0x4e, I2C_CLIENT_END};
43
44
45
46/*
47 * Insmod parameters
48 */
49
Frans Meulenbroeksa6bee4a2012-01-05 19:50:15 +010050static int pwminv; /*Inverted PWM output. */
Tomaz Merteljb5430a02010-01-08 14:43:04 -080051module_param(pwminv, int, S_IRUGO);
52
53static int init = 1; /*Power-on initialization.*/
54module_param(init, int, S_IRUGO);
55
56
57enum chips { amc6821 };
58
59#define AMC6821_REG_DEV_ID 0x3D
60#define AMC6821_REG_COMP_ID 0x3E
61#define AMC6821_REG_CONF1 0x00
62#define AMC6821_REG_CONF2 0x01
63#define AMC6821_REG_CONF3 0x3F
64#define AMC6821_REG_CONF4 0x04
65#define AMC6821_REG_STAT1 0x02
66#define AMC6821_REG_STAT2 0x03
67#define AMC6821_REG_TDATA_LOW 0x08
68#define AMC6821_REG_TDATA_HI 0x09
69#define AMC6821_REG_LTEMP_HI 0x0A
70#define AMC6821_REG_RTEMP_HI 0x0B
71#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
72#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
73#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
74#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
75#define AMC6821_REG_LTEMP_CRIT 0x1B
76#define AMC6821_REG_RTEMP_CRIT 0x1D
77#define AMC6821_REG_PSV_TEMP 0x1C
78#define AMC6821_REG_DCY 0x22
79#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
80#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
81#define AMC6821_REG_DCY_LOW_TEMP 0x21
82
83#define AMC6821_REG_TACH_LLIMITL 0x10
84#define AMC6821_REG_TACH_LLIMITH 0x11
85#define AMC6821_REG_TACH_HLIMITL 0x12
86#define AMC6821_REG_TACH_HLIMITH 0x13
87
88#define AMC6821_CONF1_START 0x01
89#define AMC6821_CONF1_FAN_INT_EN 0x02
90#define AMC6821_CONF1_FANIE 0x04
91#define AMC6821_CONF1_PWMINV 0x08
92#define AMC6821_CONF1_FAN_FAULT_EN 0x10
93#define AMC6821_CONF1_FDRC0 0x20
94#define AMC6821_CONF1_FDRC1 0x40
95#define AMC6821_CONF1_THERMOVIE 0x80
96
97#define AMC6821_CONF2_PWM_EN 0x01
98#define AMC6821_CONF2_TACH_MODE 0x02
99#define AMC6821_CONF2_TACH_EN 0x04
100#define AMC6821_CONF2_RTFIE 0x08
101#define AMC6821_CONF2_LTOIE 0x10
102#define AMC6821_CONF2_RTOIE 0x20
103#define AMC6821_CONF2_PSVIE 0x40
104#define AMC6821_CONF2_RST 0x80
105
106#define AMC6821_CONF3_THERM_FAN_EN 0x80
107#define AMC6821_CONF3_REV_MASK 0x0F
108
109#define AMC6821_CONF4_OVREN 0x10
110#define AMC6821_CONF4_TACH_FAST 0x20
111#define AMC6821_CONF4_PSPR 0x40
112#define AMC6821_CONF4_MODE 0x80
113
114#define AMC6821_STAT1_RPM_ALARM 0x01
115#define AMC6821_STAT1_FANS 0x02
116#define AMC6821_STAT1_RTH 0x04
117#define AMC6821_STAT1_RTL 0x08
118#define AMC6821_STAT1_R_THERM 0x10
119#define AMC6821_STAT1_RTF 0x20
120#define AMC6821_STAT1_LTH 0x40
121#define AMC6821_STAT1_LTL 0x80
122
123#define AMC6821_STAT2_RTC 0x08
124#define AMC6821_STAT2_LTC 0x10
125#define AMC6821_STAT2_LPSV 0x20
126#define AMC6821_STAT2_L_THERM 0x40
127#define AMC6821_STAT2_THERM_IN 0x80
128
129enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
130 IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
131 IDX_TEMP2_MAX, IDX_TEMP2_CRIT,
132 TEMP_IDX_LEN, };
133
134static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI,
135 AMC6821_REG_LTEMP_LIMIT_MIN,
136 AMC6821_REG_LTEMP_LIMIT_MAX,
137 AMC6821_REG_LTEMP_CRIT,
138 AMC6821_REG_RTEMP_HI,
139 AMC6821_REG_RTEMP_LIMIT_MIN,
140 AMC6821_REG_RTEMP_LIMIT_MAX,
141 AMC6821_REG_RTEMP_CRIT, };
142
143enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX,
144 FAN1_IDX_LEN, };
145
146static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW,
147 AMC6821_REG_TACH_LLIMITL,
148 AMC6821_REG_TACH_HLIMITL, };
149
150
151static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI,
152 AMC6821_REG_TACH_LLIMITH,
153 AMC6821_REG_TACH_HLIMITH, };
154
155static int amc6821_probe(
156 struct i2c_client *client,
157 const struct i2c_device_id *id);
158static int amc6821_detect(
159 struct i2c_client *client,
160 struct i2c_board_info *info);
161static int amc6821_init_client(struct i2c_client *client);
162static int amc6821_remove(struct i2c_client *client);
163static struct amc6821_data *amc6821_update_device(struct device *dev);
164
165/*
166 * Driver data (common to all clients)
167 */
168
169static const struct i2c_device_id amc6821_id[] = {
170 { "amc6821", amc6821 },
171 { }
172};
173
174MODULE_DEVICE_TABLE(i2c, amc6821_id);
175
176static struct i2c_driver amc6821_driver = {
177 .class = I2C_CLASS_HWMON,
178 .driver = {
179 .name = "amc6821",
180 },
181 .probe = amc6821_probe,
182 .remove = amc6821_remove,
183 .id_table = amc6821_id,
184 .detect = amc6821_detect,
185 .address_list = normal_i2c,
186};
187
188
189/*
190 * Client data (each client gets its own)
Guenter Roeckca3c7b62012-01-19 11:02:15 -0800191 */
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800192
193struct amc6821_data {
194 struct device *hwmon_dev;
195 struct mutex update_lock;
196 char valid; /* zero until following fields are valid */
197 unsigned long last_updated; /* in jiffies */
198
199 /* register values */
200 int temp[TEMP_IDX_LEN];
201
202 u16 fan[FAN1_IDX_LEN];
203 u8 fan1_div;
204
205 u8 pwm1;
206 u8 temp1_auto_point_temp[3];
207 u8 temp2_auto_point_temp[3];
208 u8 pwm1_auto_point_pwm[3];
209 u8 pwm1_enable;
210 u8 pwm1_auto_channels_temp;
211
212 u8 stat1;
213 u8 stat2;
214};
215
216
217static ssize_t get_temp(
218 struct device *dev,
219 struct device_attribute *devattr,
220 char *buf)
221{
222 struct amc6821_data *data = amc6821_update_device(dev);
223 int ix = to_sensor_dev_attr(devattr)->index;
224
225 return sprintf(buf, "%d\n", data->temp[ix] * 1000);
226}
227
228
229
230static ssize_t set_temp(
231 struct device *dev,
232 struct device_attribute *attr,
233 const char *buf,
234 size_t count)
235{
236 struct i2c_client *client = to_i2c_client(dev);
237 struct amc6821_data *data = i2c_get_clientdata(client);
238 int ix = to_sensor_dev_attr(attr)->index;
239 long val;
240
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100241 int ret = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800242 if (ret)
243 return ret;
Guenter Roeck2a844c12013-01-09 08:09:34 -0800244 val = clamp_val(val / 1000, -128, 127);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800245
246 mutex_lock(&data->update_lock);
247 data->temp[ix] = val;
248 if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) {
249 dev_err(&client->dev, "Register write error, aborting.\n");
250 count = -EIO;
251 }
252 mutex_unlock(&data->update_lock);
253 return count;
254}
255
256
257
258
259static ssize_t get_temp_alarm(
260 struct device *dev,
261 struct device_attribute *devattr,
262 char *buf)
263{
264 struct amc6821_data *data = amc6821_update_device(dev);
265 int ix = to_sensor_dev_attr(devattr)->index;
266 u8 flag;
267
268 switch (ix) {
269 case IDX_TEMP1_MIN:
270 flag = data->stat1 & AMC6821_STAT1_LTL;
271 break;
272 case IDX_TEMP1_MAX:
273 flag = data->stat1 & AMC6821_STAT1_LTH;
274 break;
275 case IDX_TEMP1_CRIT:
276 flag = data->stat2 & AMC6821_STAT2_LTC;
277 break;
278 case IDX_TEMP2_MIN:
279 flag = data->stat1 & AMC6821_STAT1_RTL;
280 break;
281 case IDX_TEMP2_MAX:
282 flag = data->stat1 & AMC6821_STAT1_RTH;
283 break;
284 case IDX_TEMP2_CRIT:
285 flag = data->stat2 & AMC6821_STAT2_RTC;
286 break;
287 default:
288 dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
289 return -EINVAL;
290 }
291 if (flag)
292 return sprintf(buf, "1");
293 else
294 return sprintf(buf, "0");
295}
296
297
298
299
300static ssize_t get_temp2_fault(
301 struct device *dev,
302 struct device_attribute *devattr,
303 char *buf)
304{
305 struct amc6821_data *data = amc6821_update_device(dev);
306 if (data->stat1 & AMC6821_STAT1_RTF)
307 return sprintf(buf, "1");
308 else
309 return sprintf(buf, "0");
310}
311
312static ssize_t get_pwm1(
313 struct device *dev,
314 struct device_attribute *devattr,
315 char *buf)
316{
317 struct amc6821_data *data = amc6821_update_device(dev);
318 return sprintf(buf, "%d\n", data->pwm1);
319}
320
321static ssize_t set_pwm1(
322 struct device *dev,
323 struct device_attribute *devattr,
324 const char *buf,
325 size_t count)
326{
327 struct i2c_client *client = to_i2c_client(dev);
328 struct amc6821_data *data = i2c_get_clientdata(client);
329 long val;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100330 int ret = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800331 if (ret)
332 return ret;
333
334 mutex_lock(&data->update_lock);
Guenter Roeck2a844c12013-01-09 08:09:34 -0800335 data->pwm1 = clamp_val(val , 0, 255);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800336 i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
337 mutex_unlock(&data->update_lock);
338 return count;
339}
340
341static ssize_t get_pwm1_enable(
342 struct device *dev,
343 struct device_attribute *devattr,
344 char *buf)
345{
346 struct amc6821_data *data = amc6821_update_device(dev);
347 return sprintf(buf, "%d\n", data->pwm1_enable);
348}
349
350static ssize_t set_pwm1_enable(
351 struct device *dev,
352 struct device_attribute *attr,
353 const char *buf,
354 size_t count)
355{
356 struct i2c_client *client = to_i2c_client(dev);
357 struct amc6821_data *data = i2c_get_clientdata(client);
358 long val;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100359 int config = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800360 if (config)
361 return config;
362
363 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
364 if (config < 0) {
365 dev_err(&client->dev,
366 "Error reading configuration register, aborting.\n");
Sachin Kamat3499e5b2013-09-11 09:49:50 +0530367 return config;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800368 }
369
370 switch (val) {
371 case 1:
372 config &= ~AMC6821_CONF1_FDRC0;
373 config &= ~AMC6821_CONF1_FDRC1;
374 break;
375 case 2:
376 config &= ~AMC6821_CONF1_FDRC0;
377 config |= AMC6821_CONF1_FDRC1;
378 break;
379 case 3:
380 config |= AMC6821_CONF1_FDRC0;
381 config |= AMC6821_CONF1_FDRC1;
382 break;
383 default:
384 return -EINVAL;
385 }
386 mutex_lock(&data->update_lock);
387 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) {
388 dev_err(&client->dev,
389 "Configuration register write error, aborting.\n");
390 count = -EIO;
391 }
392 mutex_unlock(&data->update_lock);
393 return count;
394}
395
396
397static ssize_t get_pwm1_auto_channels_temp(
398 struct device *dev,
399 struct device_attribute *devattr,
400 char *buf)
401{
402 struct amc6821_data *data = amc6821_update_device(dev);
403 return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp);
404}
405
406
407static ssize_t get_temp_auto_point_temp(
408 struct device *dev,
409 struct device_attribute *devattr,
410 char *buf)
411{
412 int ix = to_sensor_dev_attr_2(devattr)->index;
413 int nr = to_sensor_dev_attr_2(devattr)->nr;
414 struct amc6821_data *data = amc6821_update_device(dev);
415 switch (nr) {
416 case 1:
417 return sprintf(buf, "%d\n",
418 data->temp1_auto_point_temp[ix] * 1000);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800419 case 2:
420 return sprintf(buf, "%d\n",
421 data->temp2_auto_point_temp[ix] * 1000);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800422 default:
423 dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
424 return -EINVAL;
425 }
426}
427
428
429static ssize_t get_pwm1_auto_point_pwm(
430 struct device *dev,
431 struct device_attribute *devattr,
432 char *buf)
433{
434 int ix = to_sensor_dev_attr(devattr)->index;
435 struct amc6821_data *data = amc6821_update_device(dev);
436 return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]);
437}
438
439
440static inline ssize_t set_slope_register(struct i2c_client *client,
441 u8 reg,
442 u8 dpwm,
443 u8 *ptemp)
444{
445 int dt;
446 u8 tmp;
447
448 dt = ptemp[2]-ptemp[1];
449 for (tmp = 4; tmp > 0; tmp--) {
450 if (dt * (0x20 >> tmp) >= dpwm)
451 break;
452 }
453 tmp |= (ptemp[1] & 0x7C) << 1;
454 if (i2c_smbus_write_byte_data(client,
455 reg, tmp)) {
456 dev_err(&client->dev, "Register write error, aborting.\n");
457 return -EIO;
458 }
459 return 0;
460}
461
462
463
464static ssize_t set_temp_auto_point_temp(
465 struct device *dev,
466 struct device_attribute *attr,
467 const char *buf,
468 size_t count)
469{
470 struct i2c_client *client = to_i2c_client(dev);
471 struct amc6821_data *data = amc6821_update_device(dev);
472 int ix = to_sensor_dev_attr_2(attr)->index;
473 int nr = to_sensor_dev_attr_2(attr)->nr;
474 u8 *ptemp;
475 u8 reg;
476 int dpwm;
477 long val;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100478 int ret = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800479 if (ret)
480 return ret;
481
482 switch (nr) {
483 case 1:
484 ptemp = data->temp1_auto_point_temp;
485 reg = AMC6821_REG_LTEMP_FAN_CTRL;
486 break;
487 case 2:
488 ptemp = data->temp2_auto_point_temp;
489 reg = AMC6821_REG_RTEMP_FAN_CTRL;
490 break;
491 default:
492 dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
493 return -EINVAL;
494 }
495
496 data->valid = 0;
497 mutex_lock(&data->update_lock);
498 switch (ix) {
499 case 0:
Guenter Roeck2a844c12013-01-09 08:09:34 -0800500 ptemp[0] = clamp_val(val / 1000, 0,
501 data->temp1_auto_point_temp[1]);
502 ptemp[0] = clamp_val(ptemp[0], 0,
503 data->temp2_auto_point_temp[1]);
504 ptemp[0] = clamp_val(ptemp[0], 0, 63);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800505 if (i2c_smbus_write_byte_data(
506 client,
507 AMC6821_REG_PSV_TEMP,
508 ptemp[0])) {
509 dev_err(&client->dev,
510 "Register write error, aborting.\n");
511 count = -EIO;
512 }
513 goto EXIT;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800514 case 1:
Guenter Roeck2a844c12013-01-09 08:09:34 -0800515 ptemp[1] = clamp_val(val / 1000, (ptemp[0] & 0x7C) + 4, 124);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800516 ptemp[1] &= 0x7C;
Guenter Roeck2a844c12013-01-09 08:09:34 -0800517 ptemp[2] = clamp_val(ptemp[2], ptemp[1] + 1, 255);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800518 break;
519 case 2:
Guenter Roeck2a844c12013-01-09 08:09:34 -0800520 ptemp[2] = clamp_val(val / 1000, ptemp[1]+1, 255);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800521 break;
522 default:
523 dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
524 count = -EINVAL;
525 goto EXIT;
526 }
527 dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
528 if (set_slope_register(client, reg, dpwm, ptemp))
529 count = -EIO;
530
531EXIT:
532 mutex_unlock(&data->update_lock);
533 return count;
534}
535
536
537
538static ssize_t set_pwm1_auto_point_pwm(
539 struct device *dev,
540 struct device_attribute *attr,
541 const char *buf,
542 size_t count)
543{
544 struct i2c_client *client = to_i2c_client(dev);
545 struct amc6821_data *data = i2c_get_clientdata(client);
546 int dpwm;
547 long val;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100548 int ret = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800549 if (ret)
550 return ret;
551
552 mutex_lock(&data->update_lock);
Guenter Roeck2a844c12013-01-09 08:09:34 -0800553 data->pwm1_auto_point_pwm[1] = clamp_val(val, 0, 254);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800554 if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
555 data->pwm1_auto_point_pwm[1])) {
556 dev_err(&client->dev, "Register write error, aborting.\n");
557 count = -EIO;
558 goto EXIT;
559 }
560 dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
561 if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm,
562 data->temp1_auto_point_temp)) {
563 count = -EIO;
564 goto EXIT;
565 }
566 if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm,
567 data->temp2_auto_point_temp)) {
568 count = -EIO;
569 goto EXIT;
570 }
571
572EXIT:
573 data->valid = 0;
574 mutex_unlock(&data->update_lock);
575 return count;
576}
577
578static ssize_t get_fan(
579 struct device *dev,
580 struct device_attribute *devattr,
581 char *buf)
582{
583 struct amc6821_data *data = amc6821_update_device(dev);
584 int ix = to_sensor_dev_attr(devattr)->index;
585 if (0 == data->fan[ix])
586 return sprintf(buf, "0");
587 return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix]));
588}
589
590
591
592static ssize_t get_fan1_fault(
593 struct device *dev,
594 struct device_attribute *devattr,
595 char *buf)
596{
597 struct amc6821_data *data = amc6821_update_device(dev);
598 if (data->stat1 & AMC6821_STAT1_FANS)
599 return sprintf(buf, "1");
600 else
601 return sprintf(buf, "0");
602}
603
604
605
606static ssize_t set_fan(
607 struct device *dev,
608 struct device_attribute *attr,
609 const char *buf, size_t count)
610{
611 struct i2c_client *client = to_i2c_client(dev);
612 struct amc6821_data *data = i2c_get_clientdata(client);
613 long val;
614 int ix = to_sensor_dev_attr(attr)->index;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100615 int ret = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800616 if (ret)
617 return ret;
618 val = 1 > val ? 0xFFFF : 6000000/val;
619
620 mutex_lock(&data->update_lock);
Guenter Roeck2a844c12013-01-09 08:09:34 -0800621 data->fan[ix] = (u16) clamp_val(val, 1, 0xFFFF);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800622 if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
623 data->fan[ix] & 0xFF)) {
624 dev_err(&client->dev, "Register write error, aborting.\n");
625 count = -EIO;
626 goto EXIT;
627 }
628 if (i2c_smbus_write_byte_data(client,
629 fan_reg_hi[ix], data->fan[ix] >> 8)) {
630 dev_err(&client->dev, "Register write error, aborting.\n");
631 count = -EIO;
632 }
633EXIT:
634 mutex_unlock(&data->update_lock);
635 return count;
636}
637
638
639
640static ssize_t get_fan1_div(
641 struct device *dev,
642 struct device_attribute *devattr,
643 char *buf)
644{
645 struct amc6821_data *data = amc6821_update_device(dev);
646 return sprintf(buf, "%d\n", data->fan1_div);
647}
648
649static ssize_t set_fan1_div(
650 struct device *dev,
651 struct device_attribute *attr,
652 const char *buf, size_t count)
653{
654 struct i2c_client *client = to_i2c_client(dev);
655 struct amc6821_data *data = i2c_get_clientdata(client);
656 long val;
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100657 int config = kstrtol(buf, 10, &val);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800658 if (config)
659 return config;
660
661 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
662 if (config < 0) {
663 dev_err(&client->dev,
664 "Error reading configuration register, aborting.\n");
Sachin Kamat3499e5b2013-09-11 09:49:50 +0530665 return config;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800666 }
667 mutex_lock(&data->update_lock);
668 switch (val) {
669 case 2:
670 config &= ~AMC6821_CONF4_PSPR;
671 data->fan1_div = 2;
672 break;
673 case 4:
674 config |= AMC6821_CONF4_PSPR;
675 data->fan1_div = 4;
676 break;
677 default:
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800678 count = -EINVAL;
679 goto EXIT;
680 }
681 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) {
682 dev_err(&client->dev,
683 "Configuration register write error, aborting.\n");
684 count = -EIO;
685 }
686EXIT:
687 mutex_unlock(&data->update_lock);
688 return count;
689}
690
691
692
693static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
694 get_temp, NULL, IDX_TEMP1_INPUT);
695static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp,
696 set_temp, IDX_TEMP1_MIN);
697static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp,
698 set_temp, IDX_TEMP1_MAX);
699static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp,
700 set_temp, IDX_TEMP1_CRIT);
701static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
702 get_temp_alarm, NULL, IDX_TEMP1_MIN);
703static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
704 get_temp_alarm, NULL, IDX_TEMP1_MAX);
705static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
706 get_temp_alarm, NULL, IDX_TEMP1_CRIT);
707static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
708 get_temp, NULL, IDX_TEMP2_INPUT);
709static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
710 set_temp, IDX_TEMP2_MIN);
711static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp,
712 set_temp, IDX_TEMP2_MAX);
713static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp,
714 set_temp, IDX_TEMP2_CRIT);
715static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO,
716 get_temp2_fault, NULL, 0);
717static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
718 get_temp_alarm, NULL, IDX_TEMP2_MIN);
719static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
720 get_temp_alarm, NULL, IDX_TEMP2_MAX);
721static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
722 get_temp_alarm, NULL, IDX_TEMP2_CRIT);
723static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT);
724static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
725 get_fan, set_fan, IDX_FAN1_MIN);
726static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR,
727 get_fan, set_fan, IDX_FAN1_MAX);
728static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0);
729static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
730 get_fan1_div, set_fan1_div, 0);
731
732static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0);
733static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
734 get_pwm1_enable, set_pwm1_enable, 0);
735static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO,
736 get_pwm1_auto_point_pwm, NULL, 0);
737static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
738 get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1);
739static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO,
740 get_pwm1_auto_point_pwm, NULL, 2);
741static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
742 get_pwm1_auto_channels_temp, NULL, 0);
743static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO,
744 get_temp_auto_point_temp, NULL, 1, 0);
745static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
746 get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1);
747static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
748 get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2);
749
750static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
751 get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0);
752static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
753 get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1);
754static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
755 get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2);
756
757
758
759static struct attribute *amc6821_attrs[] = {
760 &sensor_dev_attr_temp1_input.dev_attr.attr,
761 &sensor_dev_attr_temp1_min.dev_attr.attr,
762 &sensor_dev_attr_temp1_max.dev_attr.attr,
763 &sensor_dev_attr_temp1_crit.dev_attr.attr,
764 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
765 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
766 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
767 &sensor_dev_attr_temp2_input.dev_attr.attr,
768 &sensor_dev_attr_temp2_min.dev_attr.attr,
769 &sensor_dev_attr_temp2_max.dev_attr.attr,
770 &sensor_dev_attr_temp2_crit.dev_attr.attr,
771 &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
772 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
773 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
774 &sensor_dev_attr_temp2_fault.dev_attr.attr,
775 &sensor_dev_attr_fan1_input.dev_attr.attr,
776 &sensor_dev_attr_fan1_min.dev_attr.attr,
777 &sensor_dev_attr_fan1_max.dev_attr.attr,
778 &sensor_dev_attr_fan1_fault.dev_attr.attr,
779 &sensor_dev_attr_fan1_div.dev_attr.attr,
780 &sensor_dev_attr_pwm1.dev_attr.attr,
781 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
782 &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
783 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
784 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
785 &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
786 &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
787 &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
788 &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr,
789 &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
790 &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
791 &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr,
792 NULL
793};
794
795static struct attribute_group amc6821_attr_grp = {
796 .attrs = amc6821_attrs,
797};
798
799
800
801/* Return 0 if detection is successful, -ENODEV otherwise */
802static int amc6821_detect(
803 struct i2c_client *client,
804 struct i2c_board_info *info)
805{
806 struct i2c_adapter *adapter = client->adapter;
807 int address = client->addr;
808 int dev_id, comp_id;
809
810 dev_dbg(&adapter->dev, "amc6821_detect called.\n");
811
812 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
813 dev_dbg(&adapter->dev,
814 "amc6821: I2C bus doesn't support byte mode, "
815 "skipping.\n");
816 return -ENODEV;
817 }
818
819 dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID);
820 comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID);
821 if (dev_id != 0x21 || comp_id != 0x49) {
822 dev_dbg(&adapter->dev,
823 "amc6821: detection failed at 0x%02x.\n",
824 address);
825 return -ENODEV;
826 }
827
Guenter Roeckca3c7b62012-01-19 11:02:15 -0800828 /*
829 * Bit 7 of the address register is ignored, so we can check the
830 * ID registers again
831 */
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800832 dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID);
833 comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID);
834 if (dev_id != 0x21 || comp_id != 0x49) {
835 dev_dbg(&adapter->dev,
836 "amc6821: detection failed at 0x%02x.\n",
837 address);
838 return -ENODEV;
839 }
840
841 dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address);
842 strlcpy(info->type, "amc6821", I2C_NAME_SIZE);
843
844 return 0;
845}
846
847static int amc6821_probe(
848 struct i2c_client *client,
849 const struct i2c_device_id *id)
850{
851 struct amc6821_data *data;
852 int err;
853
Guenter Roeckf9286432012-06-02 09:58:02 -0700854 data = devm_kzalloc(&client->dev, sizeof(struct amc6821_data),
855 GFP_KERNEL);
856 if (!data)
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800857 return -ENOMEM;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800858
859 i2c_set_clientdata(client, data);
860 mutex_init(&data->update_lock);
861
862 /*
863 * Initialize the amc6821 chip
864 */
865 err = amc6821_init_client(client);
866 if (err)
Guenter Roeckf9286432012-06-02 09:58:02 -0700867 return err;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800868
869 err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp);
870 if (err)
Guenter Roeckf9286432012-06-02 09:58:02 -0700871 return err;
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800872
873 data->hwmon_dev = hwmon_device_register(&client->dev);
874 if (!IS_ERR(data->hwmon_dev))
875 return 0;
876
877 err = PTR_ERR(data->hwmon_dev);
878 dev_err(&client->dev, "error registering hwmon device.\n");
879 sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800880 return err;
881}
882
883static int amc6821_remove(struct i2c_client *client)
884{
885 struct amc6821_data *data = i2c_get_clientdata(client);
886
887 hwmon_device_unregister(data->hwmon_dev);
888 sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
889
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800890 return 0;
891}
892
893
894static int amc6821_init_client(struct i2c_client *client)
895{
896 int config;
897 int err = -EIO;
898
899 if (init) {
900 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
901
902 if (config < 0) {
903 dev_err(&client->dev,
904 "Error reading configuration register, aborting.\n");
905 return err;
906 }
907
908 config |= AMC6821_CONF4_MODE;
909
910 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
911 config)) {
912 dev_err(&client->dev,
913 "Configuration register write error, aborting.\n");
914 return err;
915 }
916
917 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
918
919 if (config < 0) {
920 dev_err(&client->dev,
921 "Error reading configuration register, aborting.\n");
922 return err;
923 }
924
925 dev_info(&client->dev, "Revision %d\n", config & 0x0f);
926
927 config &= ~AMC6821_CONF3_THERM_FAN_EN;
928
929 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
930 config)) {
931 dev_err(&client->dev,
932 "Configuration register write error, aborting.\n");
933 return err;
934 }
935
936 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
937
938 if (config < 0) {
939 dev_err(&client->dev,
940 "Error reading configuration register, aborting.\n");
941 return err;
942 }
943
944 config &= ~AMC6821_CONF2_RTFIE;
945 config &= ~AMC6821_CONF2_LTOIE;
946 config &= ~AMC6821_CONF2_RTOIE;
947 if (i2c_smbus_write_byte_data(client,
948 AMC6821_REG_CONF2, config)) {
949 dev_err(&client->dev,
950 "Configuration register write error, aborting.\n");
951 return err;
952 }
953
954 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
955
956 if (config < 0) {
957 dev_err(&client->dev,
958 "Error reading configuration register, aborting.\n");
959 return err;
960 }
961
962 config &= ~AMC6821_CONF1_THERMOVIE;
963 config &= ~AMC6821_CONF1_FANIE;
964 config |= AMC6821_CONF1_START;
965 if (pwminv)
966 config |= AMC6821_CONF1_PWMINV;
967 else
968 config &= ~AMC6821_CONF1_PWMINV;
969
970 if (i2c_smbus_write_byte_data(
971 client, AMC6821_REG_CONF1, config)) {
972 dev_err(&client->dev,
973 "Configuration register write error, aborting.\n");
974 return err;
975 }
976 }
977 return 0;
978}
979
980
981static struct amc6821_data *amc6821_update_device(struct device *dev)
982{
983 struct i2c_client *client = to_i2c_client(dev);
984 struct amc6821_data *data = i2c_get_clientdata(client);
985 int timeout = HZ;
986 u8 reg;
987 int i;
988
989 mutex_lock(&data->update_lock);
990
991 if (time_after(jiffies, data->last_updated + timeout) ||
992 !data->valid) {
993
994 for (i = 0; i < TEMP_IDX_LEN; i++)
995 data->temp[i] = i2c_smbus_read_byte_data(client,
996 temp_reg[i]);
997
998 data->stat1 = i2c_smbus_read_byte_data(client,
999 AMC6821_REG_STAT1);
1000 data->stat2 = i2c_smbus_read_byte_data(client,
1001 AMC6821_REG_STAT2);
1002
1003 data->pwm1 = i2c_smbus_read_byte_data(client,
1004 AMC6821_REG_DCY);
1005 for (i = 0; i < FAN1_IDX_LEN; i++) {
1006 data->fan[i] = i2c_smbus_read_byte_data(
1007 client,
1008 fan_reg_low[i]);
1009 data->fan[i] += i2c_smbus_read_byte_data(
1010 client,
1011 fan_reg_hi[i]) << 8;
1012 }
1013 data->fan1_div = i2c_smbus_read_byte_data(client,
1014 AMC6821_REG_CONF4);
1015 data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
1016
1017 data->pwm1_auto_point_pwm[0] = 0;
1018 data->pwm1_auto_point_pwm[2] = 255;
1019 data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client,
1020 AMC6821_REG_DCY_LOW_TEMP);
1021
1022 data->temp1_auto_point_temp[0] =
1023 i2c_smbus_read_byte_data(client,
1024 AMC6821_REG_PSV_TEMP);
1025 data->temp2_auto_point_temp[0] =
1026 data->temp1_auto_point_temp[0];
1027 reg = i2c_smbus_read_byte_data(client,
1028 AMC6821_REG_LTEMP_FAN_CTRL);
1029 data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1;
1030 reg &= 0x07;
1031 reg = 0x20 >> reg;
1032 if (reg > 0)
1033 data->temp1_auto_point_temp[2] =
1034 data->temp1_auto_point_temp[1] +
1035 (data->pwm1_auto_point_pwm[2] -
1036 data->pwm1_auto_point_pwm[1]) / reg;
1037 else
1038 data->temp1_auto_point_temp[2] = 255;
1039
1040 reg = i2c_smbus_read_byte_data(client,
1041 AMC6821_REG_RTEMP_FAN_CTRL);
1042 data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1;
1043 reg &= 0x07;
1044 reg = 0x20 >> reg;
1045 if (reg > 0)
1046 data->temp2_auto_point_temp[2] =
1047 data->temp2_auto_point_temp[1] +
1048 (data->pwm1_auto_point_pwm[2] -
1049 data->pwm1_auto_point_pwm[1]) / reg;
1050 else
1051 data->temp2_auto_point_temp[2] = 255;
1052
1053 reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
1054 reg = (reg >> 5) & 0x3;
1055 switch (reg) {
1056 case 0: /*open loop: software sets pwm1*/
1057 data->pwm1_auto_channels_temp = 0;
1058 data->pwm1_enable = 1;
1059 break;
1060 case 2: /*closed loop: remote T (temp2)*/
1061 data->pwm1_auto_channels_temp = 2;
1062 data->pwm1_enable = 2;
1063 break;
1064 case 3: /*closed loop: local and remote T (temp2)*/
1065 data->pwm1_auto_channels_temp = 3;
1066 data->pwm1_enable = 3;
1067 break;
Guenter Roeckca3c7b62012-01-19 11:02:15 -08001068 case 1: /*
1069 * semi-open loop: software sets rpm, chip controls
1070 * pwm1, currently not implemented
1071 */
Tomaz Merteljb5430a02010-01-08 14:43:04 -08001072 data->pwm1_auto_channels_temp = 0;
1073 data->pwm1_enable = 0;
1074 break;
1075 }
1076
1077 data->last_updated = jiffies;
1078 data->valid = 1;
1079 }
1080 mutex_unlock(&data->update_lock);
1081 return data;
1082}
1083
Axel Linf0967ee2012-01-20 15:38:18 +08001084module_i2c_driver(amc6821_driver);
Tomaz Merteljb5430a02010-01-08 14:43:04 -08001085
1086MODULE_LICENSE("GPL");
1087MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>");
1088MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver");