blob: e58af9e95506c923a84bb7b3a98638a7147ba31e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/**************************************************************************
2 * Initio 9100 device driver for Linux.
3 *
4 * Copyright (c) 1994-1998 Initio Corporation
5 * All rights reserved.
6 *
Alan Coxfa195af2008-10-27 15:16:36 +00007 * Cleanups (c) Copyright 2007 Red Hat <alan@lxorguk.ukuu.org.uk>
Alan Cox72d39fe2007-05-21 15:06:43 +01008 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2, or (at your option)
12 * any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; see the file COPYING. If not, write to
21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * SUCH DAMAGE.
34 *
35 **************************************************************************/
36
37
Linus Torvalds1da177e2005-04-16 15:20:36 -070038#include <linux/types.h>
39
Linus Torvalds1da177e2005-04-16 15:20:36 -070040#define TOTAL_SG_ENTRY 32
41#define MAX_SUPPORTED_ADAPTERS 8
42#define MAX_OFFSET 15
43#define MAX_TARGETS 16
44
45typedef struct {
46 unsigned short base;
47 unsigned short vec;
48} i91u_config;
49
50/***************************************/
51/* Tulip Configuration Register Set */
52/***************************************/
53#define TUL_PVID 0x00 /* Vendor ID */
54#define TUL_PDID 0x02 /* Device ID */
55#define TUL_PCMD 0x04 /* Command */
56#define TUL_PSTUS 0x06 /* Status */
57#define TUL_PRID 0x08 /* Revision number */
58#define TUL_PPI 0x09 /* Programming interface */
59#define TUL_PSC 0x0A /* Sub Class */
60#define TUL_PBC 0x0B /* Base Class */
61#define TUL_PCLS 0x0C /* Cache line size */
62#define TUL_PLTR 0x0D /* Latency timer */
63#define TUL_PHDT 0x0E /* Header type */
64#define TUL_PBIST 0x0F /* BIST */
65#define TUL_PBAD 0x10 /* Base address */
66#define TUL_PBAD1 0x14 /* Base address */
67#define TUL_PBAD2 0x18 /* Base address */
68#define TUL_PBAD3 0x1C /* Base address */
69#define TUL_PBAD4 0x20 /* Base address */
70#define TUL_PBAD5 0x24 /* Base address */
71#define TUL_PRSVD 0x28 /* Reserved */
72#define TUL_PRSVD1 0x2C /* Reserved */
73#define TUL_PRAD 0x30 /* Expansion ROM base address */
74#define TUL_PRSVD2 0x34 /* Reserved */
75#define TUL_PRSVD3 0x38 /* Reserved */
76#define TUL_PINTL 0x3C /* Interrupt line */
77#define TUL_PINTP 0x3D /* Interrupt pin */
78#define TUL_PIGNT 0x3E /* MIN_GNT */
79#define TUL_PMGNT 0x3F /* MAX_GNT */
80
81/************************/
82/* Jasmin Register Set */
83/************************/
84#define TUL_HACFG0 0x40 /* H/A Configuration Register 0 */
85#define TUL_HACFG1 0x41 /* H/A Configuration Register 1 */
86#define TUL_HACFG2 0x42 /* H/A Configuration Register 2 */
87
88#define TUL_SDCFG0 0x44 /* SCSI Device Configuration 0 */
89#define TUL_SDCFG1 0x45 /* SCSI Device Configuration 1 */
90#define TUL_SDCFG2 0x46 /* SCSI Device Configuration 2 */
91#define TUL_SDCFG3 0x47 /* SCSI Device Configuration 3 */
92
93#define TUL_GINTS 0x50 /* Global Interrupt Status Register */
94#define TUL_GIMSK 0x52 /* Global Interrupt MASK Register */
95#define TUL_GCTRL 0x54 /* Global Control Register */
96#define TUL_GCTRL_EEPROM_BIT 0x04
97#define TUL_GCTRL1 0x55 /* Global Control Register */
98#define TUL_DMACFG 0x5B /* DMA configuration */
99#define TUL_NVRAM 0x5D /* Non-volatile RAM port */
100
101#define TUL_SCnt0 0x80 /* 00 R/W Transfer Counter Low */
102#define TUL_SCnt1 0x81 /* 01 R/W Transfer Counter Mid */
103#define TUL_SCnt2 0x82 /* 02 R/W Transfer Count High */
104#define TUL_SFifoCnt 0x83 /* 03 R FIFO counter */
105#define TUL_SIntEnable 0x84 /* 03 W Interrupt enble */
106#define TUL_SInt 0x84 /* 04 R Interrupt Register */
107#define TUL_SCtrl0 0x85 /* 05 W Control 0 */
108#define TUL_SStatus0 0x85 /* 05 R Status 0 */
109#define TUL_SCtrl1 0x86 /* 06 W Control 1 */
110#define TUL_SStatus1 0x86 /* 06 R Status 1 */
111#define TUL_SConfig 0x87 /* 07 W Configuration */
112#define TUL_SStatus2 0x87 /* 07 R Status 2 */
113#define TUL_SPeriod 0x88 /* 08 W Sync. Transfer Period & Offset */
114#define TUL_SOffset 0x88 /* 08 R Offset */
115#define TUL_SScsiId 0x89 /* 09 W SCSI ID */
116#define TUL_SBusId 0x89 /* 09 R SCSI BUS ID */
117#define TUL_STimeOut 0x8A /* 0A W Sel/Resel Time Out Register */
118#define TUL_SIdent 0x8A /* 0A R Identify Message Register */
119#define TUL_SAvail 0x8A /* 0A R Availiable Counter Register */
120#define TUL_SData 0x8B /* 0B R/W SCSI data in/out */
121#define TUL_SFifo 0x8C /* 0C R/W FIFO */
122#define TUL_SSignal 0x90 /* 10 R/W SCSI signal in/out */
123#define TUL_SCmd 0x91 /* 11 R/W Command */
124#define TUL_STest0 0x92 /* 12 R/W Test0 */
125#define TUL_STest1 0x93 /* 13 R/W Test1 */
126#define TUL_SCFG1 0x94 /* 14 R/W Configuration */
127
128#define TUL_XAddH 0xC0 /*DMA Transfer Physical Address */
129#define TUL_XAddW 0xC8 /*DMA Current Transfer Physical Address */
130#define TUL_XCntH 0xD0 /*DMA Transfer Counter */
131#define TUL_XCntW 0xD4 /*DMA Current Transfer Counter */
132#define TUL_XCmd 0xD8 /*DMA Command Register */
133#define TUL_Int 0xDC /*Interrupt Register */
134#define TUL_XStatus 0xDD /*DMA status Register */
135#define TUL_Mask 0xE0 /*Interrupt Mask Register */
136#define TUL_XCtrl 0xE4 /*DMA Control Register */
137#define TUL_XCtrl1 0xE5 /*DMA Control Register 1 */
138#define TUL_XFifo 0xE8 /*DMA FIFO */
139
140#define TUL_WCtrl 0xF7 /*Bus master wait state control */
141#define TUL_DCtrl 0xFB /*DMA delay control */
142
143/*----------------------------------------------------------------------*/
144/* bit definition for Command register of Configuration Space Header */
145/*----------------------------------------------------------------------*/
146#define BUSMS 0x04 /* BUS MASTER Enable */
147#define IOSPA 0x01 /* IO Space Enable */
148
149/*----------------------------------------------------------------------*/
150/* Command Codes of Tulip SCSI Command register */
151/*----------------------------------------------------------------------*/
152#define TSC_EN_RESEL 0x80 /* Enable Reselection */
153#define TSC_CMD_COMP 0x84 /* Command Complete Sequence */
154#define TSC_SEL 0x01 /* Select Without ATN Sequence */
155#define TSC_SEL_ATN 0x11 /* Select With ATN Sequence */
156#define TSC_SEL_ATN_DMA 0x51 /* Select With ATN Sequence with DMA */
157#define TSC_SEL_ATN3 0x31 /* Select With ATN3 Sequence */
158#define TSC_SEL_ATNSTOP 0x12 /* Select With ATN and Stop Sequence */
159#define TSC_SELATNSTOP 0x1E /* Select With ATN and Stop Sequence */
160
161#define TSC_SEL_ATN_DIRECT_IN 0x95 /* Select With ATN Sequence */
162#define TSC_SEL_ATN_DIRECT_OUT 0x15 /* Select With ATN Sequence */
163#define TSC_SEL_ATN3_DIRECT_IN 0xB5 /* Select With ATN3 Sequence */
164#define TSC_SEL_ATN3_DIRECT_OUT 0x35 /* Select With ATN3 Sequence */
Adrian Bunk47bdd712006-06-30 18:25:18 +0200165#define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Information out */
166#define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Information in */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
Adrian Bunk47bdd712006-06-30 18:25:18 +0200168#define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Information out */
169#define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Information in */
170#define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Information out */
171#define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Information in */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172
173#define TSC_MSG_ACCEPT 0x0F /* Message Accept */
174
175/*----------------------------------------------------------------------*/
176/* bit definition for Tulip SCSI Control 0 Register */
177/*----------------------------------------------------------------------*/
178#define TSC_RST_SEQ 0x20 /* Reset sequence counter */
179#define TSC_FLUSH_FIFO 0x10 /* Flush FIFO */
180#define TSC_ABT_CMD 0x04 /* Abort command (sequence) */
181#define TSC_RST_CHIP 0x02 /* Reset SCSI Chip */
182#define TSC_RST_BUS 0x01 /* Reset SCSI Bus */
183
184/*----------------------------------------------------------------------*/
185/* bit definition for Tulip SCSI Control 1 Register */
186/*----------------------------------------------------------------------*/
187#define TSC_EN_SCAM 0x80 /* Enable SCAM */
188#define TSC_TIMER 0x40 /* Select timeout unit */
189#define TSC_EN_SCSI2 0x20 /* SCSI-2 mode */
190#define TSC_PWDN 0x10 /* Power down mode */
191#define TSC_WIDE_CPU 0x08 /* Wide CPU */
192#define TSC_HW_RESELECT 0x04 /* Enable HW reselect */
193#define TSC_EN_BUS_OUT 0x02 /* Enable SCSI data bus out latch */
194#define TSC_EN_BUS_IN 0x01 /* Enable SCSI data bus in latch */
195
196/*----------------------------------------------------------------------*/
197/* bit definition for Tulip SCSI Configuration Register */
198/*----------------------------------------------------------------------*/
199#define TSC_EN_LATCH 0x80 /* Enable phase latch */
200#define TSC_INITIATOR 0x40 /* Initiator mode */
201#define TSC_EN_SCSI_PAR 0x20 /* Enable SCSI parity */
202#define TSC_DMA_8BIT 0x10 /* Alternate dma 8-bits mode */
203#define TSC_DMA_16BIT 0x08 /* Alternate dma 16-bits mode */
204#define TSC_EN_WDACK 0x04 /* Enable DACK while wide SCSI xfer */
205#define TSC_ALT_PERIOD 0x02 /* Alternate sync period mode */
206#define TSC_DIS_SCSIRST 0x01 /* Disable SCSI bus reset us */
207
208#define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST)
209
210#define TSC_WIDE_SCSI 0x80 /* Enable Wide SCSI */
211
212/*----------------------------------------------------------------------*/
213/* bit definition for Tulip SCSI signal Register */
214/*----------------------------------------------------------------------*/
215#define TSC_RST_ACK 0x00 /* Release ACK signal */
216#define TSC_RST_ATN 0x00 /* Release ATN signal */
217#define TSC_RST_BSY 0x00 /* Release BSY signal */
218
219#define TSC_SET_ACK 0x40 /* ACK signal */
220#define TSC_SET_ATN 0x08 /* ATN signal */
221
222#define TSC_REQI 0x80 /* REQ signal */
223#define TSC_ACKI 0x40 /* ACK signal */
224#define TSC_BSYI 0x20 /* BSY signal */
225#define TSC_SELI 0x10 /* SEL signal */
226#define TSC_ATNI 0x08 /* ATN signal */
227#define TSC_MSGI 0x04 /* MSG signal */
228#define TSC_CDI 0x02 /* C/D signal */
229#define TSC_IOI 0x01 /* I/O signal */
230
231
232/*----------------------------------------------------------------------*/
233/* bit definition for Tulip SCSI Status 0 Register */
234/*----------------------------------------------------------------------*/
235#define TSS_INT_PENDING 0x80 /* Interrupt pending */
236#define TSS_SEQ_ACTIVE 0x40 /* Sequencer active */
237#define TSS_XFER_CNT 0x20 /* Transfer counter zero */
238#define TSS_FIFO_EMPTY 0x10 /* FIFO empty */
239#define TSS_PAR_ERROR 0x08 /* SCSI parity error */
240#define TSS_PH_MASK 0x07 /* SCSI phase mask */
241
242/*----------------------------------------------------------------------*/
243/* bit definition for Tulip SCSI Status 1 Register */
244/*----------------------------------------------------------------------*/
245#define TSS_STATUS_RCV 0x08 /* Status received */
246#define TSS_MSG_SEND 0x40 /* Message sent */
247#define TSS_CMD_PH_CMP 0x20 /* command phase done */
248#define TSS_DATA_PH_CMP 0x10 /* Data phase done */
249#define TSS_STATUS_SEND 0x08 /* Status sent */
250#define TSS_XFER_CMP 0x04 /* Transfer completed */
251#define TSS_SEL_CMP 0x02 /* Selection completed */
252#define TSS_ARB_CMP 0x01 /* Arbitration completed */
253
254/*----------------------------------------------------------------------*/
255/* bit definition for Tulip SCSI Status 2 Register */
256/*----------------------------------------------------------------------*/
257#define TSS_CMD_ABTED 0x80 /* Command aborted */
258#define TSS_OFFSET_0 0x40 /* Offset counter zero */
259#define TSS_FIFO_FULL 0x20 /* FIFO full */
260#define TSS_TIMEOUT_0 0x10 /* Timeout counter zero */
261#define TSS_BUSY_RLS 0x08 /* Busy release */
262#define TSS_PH_MISMATCH 0x04 /* Phase mismatch */
263#define TSS_SCSI_BUS_EN 0x02 /* SCSI data bus enable */
264#define TSS_SCSIRST 0x01 /* SCSI bus reset in progress */
265
266/*----------------------------------------------------------------------*/
267/* bit definition for Tulip SCSI Interrupt Register */
268/*----------------------------------------------------------------------*/
269#define TSS_RESEL_INT 0x80 /* Reselected interrupt */
270#define TSS_SEL_TIMEOUT 0x40 /* Selected/reselected timeout */
271#define TSS_BUS_SERV 0x20
272#define TSS_SCSIRST_INT 0x10 /* SCSI bus reset detected */
273#define TSS_DISC_INT 0x08 /* Disconnected interrupt */
274#define TSS_SEL_INT 0x04 /* Select interrupt */
275#define TSS_SCAM_SEL 0x02 /* SCAM selected */
276#define TSS_FUNC_COMP 0x01
277
278/*----------------------------------------------------------------------*/
279/* SCSI Phase Codes. */
280/*----------------------------------------------------------------------*/
281#define DATA_OUT 0
282#define DATA_IN 1 /* 4 */
283#define CMD_OUT 2
284#define STATUS_IN 3 /* 6 */
285#define MSG_OUT 6 /* 3 */
286#define MSG_IN 7
287
288
289
290/*----------------------------------------------------------------------*/
291/* Command Codes of Tulip xfer Command register */
292/*----------------------------------------------------------------------*/
293#define TAX_X_FORC 0x02
294#define TAX_X_ABT 0x04
295#define TAX_X_CLR_FIFO 0x08
296
297#define TAX_X_IN 0x21
298#define TAX_X_OUT 0x01
299#define TAX_SG_IN 0xA1
300#define TAX_SG_OUT 0x81
301
302/*----------------------------------------------------------------------*/
303/* Tulip Interrupt Register */
304/*----------------------------------------------------------------------*/
305#define XCMP 0x01
306#define FCMP 0x02
307#define XABT 0x04
308#define XERR 0x08
309#define SCMP 0x10
310#define IPEND 0x80
311
312/*----------------------------------------------------------------------*/
313/* Tulip DMA Status Register */
314/*----------------------------------------------------------------------*/
315#define XPEND 0x01 /* Transfer pending */
316#define FEMPTY 0x02 /* FIFO empty */
317
318
319
320/*----------------------------------------------------------------------*/
321/* bit definition for TUL_GCTRL */
322/*----------------------------------------------------------------------*/
323#define EXTSG 0x80
324#define EXTAD 0x60
325#define SEG4K 0x08
326#define EEPRG 0x04
327#define MRMUL 0x02
328
329/*----------------------------------------------------------------------*/
330/* bit definition for TUL_NVRAM */
331/*----------------------------------------------------------------------*/
332#define SE2CS 0x08
333#define SE2CLK 0x04
334#define SE2DO 0x02
335#define SE2DI 0x01
336
337
338/************************************************************************/
339/* Scatter-Gather Element Structure */
340/************************************************************************/
Alan Cox72d39fe2007-05-21 15:06:43 +0100341struct sg_entry {
342 u32 data; /* Data Pointer */
343 u32 len; /* Data Length */
344};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345
346/***********************************************************************
347 SCSI Control Block
348************************************************************************/
Alan Cox72d39fe2007-05-21 15:06:43 +0100349struct scsi_ctrl_blk {
350 struct scsi_ctrl_blk *next;
351 u8 status; /*4 */
352 u8 next_state; /*5 */
353 u8 mode; /*6 */
354 u8 msgin; /*7 SCB_Res0 */
355 u16 sgidx; /*8 */
356 u16 sgmax; /*A */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357#ifdef ALPHA
Alan Cox72d39fe2007-05-21 15:06:43 +0100358 u32 reserved[2]; /*C */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700359#else
Alan Cox72d39fe2007-05-21 15:06:43 +0100360 u32 reserved[3]; /*C */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361#endif
362
Alan Cox72d39fe2007-05-21 15:06:43 +0100363 u32 xferlen; /*18 Current xfer len */
364 u32 totxlen; /*1C Total xfer len */
365 u32 paddr; /*20 SCB phy. Addr. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366
Alan Cox72d39fe2007-05-21 15:06:43 +0100367 u8 opcode; /*24 SCB command code */
368 u8 flags; /*25 SCB Flags */
369 u8 target; /*26 Target Id */
370 u8 lun; /*27 Lun */
371 u32 bufptr; /*28 Data Buffer Pointer */
372 u32 buflen; /*2C Data Allocation Length */
373 u8 sglen; /*30 SG list # */
374 u8 senselen; /*31 Sense Allocation Length */
375 u8 hastat; /*32 */
376 u8 tastat; /*33 */
377 u8 cdblen; /*34 CDB Length */
378 u8 ident; /*35 Identify */
379 u8 tagmsg; /*36 Tag Message */
380 u8 tagid; /*37 Queue Tag */
381 u8 cdb[12]; /*38 */
382 u32 sgpaddr; /*44 SG List/Sense Buf phy. Addr. */
383 u32 senseptr; /*48 Sense data pointer */
384 void (*post) (u8 *, u8 *); /*4C POST routine */
385 struct scsi_cmnd *srb; /*50 SRB Pointer */
386 struct sg_entry sglist[TOTAL_SG_ENTRY]; /*54 Start of SG list */
387};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388
Alan Cox72d39fe2007-05-21 15:06:43 +0100389/* Bit Definition for status */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390#define SCB_RENT 0x01
391#define SCB_PEND 0x02
392#define SCB_CONTIG 0x04 /* Contigent Allegiance */
393#define SCB_SELECT 0x08
394#define SCB_BUSY 0x10
395#define SCB_DONE 0x20
396
397
Alan Cox72d39fe2007-05-21 15:06:43 +0100398/* Opcodes for opcode */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399#define ExecSCSI 0x1
400#define BusDevRst 0x2
401#define AbortCmd 0x3
402
403
Alan Cox72d39fe2007-05-21 15:06:43 +0100404/* Bit Definition for mode */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405#define SCM_RSENS 0x01 /* request sense mode */
406
407
Alan Cox72d39fe2007-05-21 15:06:43 +0100408/* Bit Definition for flags */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700409#define SCF_DONE 0x01
410#define SCF_POST 0x02
411#define SCF_SENSE 0x04
412#define SCF_DIR 0x18
413#define SCF_NO_DCHK 0x00
414#define SCF_DIN 0x08
415#define SCF_DOUT 0x10
416#define SCF_NO_XF 0x18
417#define SCF_WR_VF 0x20 /* Write verify turn on */
418#define SCF_POLL 0x40
419#define SCF_SG 0x80
420
421/* Error Codes for SCB_HaStat */
422#define HOST_SEL_TOUT 0x11
423#define HOST_DO_DU 0x12
424#define HOST_BUS_FREE 0x13
425#define HOST_BAD_PHAS 0x14
426#define HOST_INV_CMD 0x16
427#define HOST_ABORTED 0x1A /* 07/21/98 */
428#define HOST_SCSI_RST 0x1B
429#define HOST_DEV_RST 0x1C
430
431/* Error Codes for SCB_TaStat */
432#define TARGET_CHKCOND 0x02
433#define TARGET_BUSY 0x08
434#define INI_QUEUE_FULL 0x28
435
436/* SCSI MESSAGE */
437#define MSG_COMP 0x00
438#define MSG_EXTEND 0x01
439#define MSG_SDP 0x02
440#define MSG_RESTORE 0x03
441#define MSG_DISC 0x04
442#define MSG_IDE 0x05
443#define MSG_ABORT 0x06
444#define MSG_REJ 0x07
445#define MSG_NOP 0x08
446#define MSG_PARITY 0x09
447#define MSG_LINK_COMP 0x0A
448#define MSG_LINK_FLAG 0x0B
449#define MSG_DEVRST 0x0C
450#define MSG_ABORT_TAG 0x0D
451
452/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */
453#define MSG_STAG 0x20
454#define MSG_HTAG 0x21
455#define MSG_OTAG 0x22
456
457#define MSG_IGNOREWIDE 0x23
458
459#define MSG_IDENT 0x80
460
461/***********************************************************************
462 Target Device Control Structure
463**********************************************************************/
464
Alan Cox72d39fe2007-05-21 15:06:43 +0100465struct target_control {
466 u16 flags;
467 u8 js_period;
468 u8 sconfig0;
469 u16 drv_flags;
470 u8 heads;
471 u8 sectors;
472};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700473
474/***********************************************************************
475 Target Device Control Structure
476**********************************************************************/
477
478/* Bit Definition for TCF_Flags */
479#define TCF_SCSI_RATE 0x0007
480#define TCF_EN_DISC 0x0008
481#define TCF_NO_SYNC_NEGO 0x0010
482#define TCF_NO_WDTR 0x0020
483#define TCF_EN_255 0x0040
484#define TCF_EN_START 0x0080
485#define TCF_WDTR_DONE 0x0100
486#define TCF_SYNC_DONE 0x0200
487#define TCF_BUSY 0x0400
488
489
490/* Bit Definition for TCF_DrvFlags */
491#define TCF_DRV_BUSY 0x01 /* Indicate target busy(driver) */
492#define TCF_DRV_EN_TAG 0x0800
493#define TCF_DRV_255_63 0x0400
494
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495/***********************************************************************
496 Host Adapter Control Structure
497************************************************************************/
Alan Cox72d39fe2007-05-21 15:06:43 +0100498struct initio_host {
499 u16 addr; /* 00 */
500 u16 bios_addr; /* 02 */
501 u8 irq; /* 04 */
502 u8 scsi_id; /* 05 */
503 u8 max_tar; /* 06 */
504 u8 num_scbs; /* 07 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700505
Alan Cox72d39fe2007-05-21 15:06:43 +0100506 u8 flags; /* 08 */
507 u8 index; /* 09 */
508 u8 ha_id; /* 0A */
509 u8 config; /* 0B */
510 u16 idmask; /* 0C */
511 u8 semaph; /* 0E */
512 u8 phase; /* 0F */
513 u8 jsstatus0; /* 10 */
514 u8 jsint; /* 11 */
515 u8 jsstatus1; /* 12 */
516 u8 sconf1; /* 13 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517
Alan Cox72d39fe2007-05-21 15:06:43 +0100518 u8 msg[8]; /* 14 */
519 struct scsi_ctrl_blk *next_avail; /* 1C */
520 struct scsi_ctrl_blk *scb; /* 20 */
521 struct scsi_ctrl_blk *scb_end; /* 24 */ /*UNUSED*/
522 struct scsi_ctrl_blk *next_pending; /* 28 */
523 struct scsi_ctrl_blk *next_contig; /* 2C */ /*UNUSED*/
524 struct scsi_ctrl_blk *active; /* 30 */
525 struct target_control *active_tc; /* 34 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700526
Alan Cox72d39fe2007-05-21 15:06:43 +0100527 struct scsi_ctrl_blk *first_avail; /* 38 */
528 struct scsi_ctrl_blk *last_avail; /* 3C */
529 struct scsi_ctrl_blk *first_pending; /* 40 */
530 struct scsi_ctrl_blk *last_pending; /* 44 */
531 struct scsi_ctrl_blk *first_busy; /* 48 */
532 struct scsi_ctrl_blk *last_busy; /* 4C */
533 struct scsi_ctrl_blk *first_done; /* 50 */
534 struct scsi_ctrl_blk *last_done; /* 54 */
535 u8 max_tags[16]; /* 58 */
536 u8 act_tags[16]; /* 68 */
537 struct target_control targets[MAX_TARGETS]; /* 78 */
538 spinlock_t avail_lock;
539 spinlock_t semaph_lock;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 struct pci_dev *pci_dev;
Alan Cox72d39fe2007-05-21 15:06:43 +0100541};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542
543/* Bit Definition for HCB_Config */
544#define HCC_SCSI_RESET 0x01
545#define HCC_EN_PAR 0x02
546#define HCC_ACT_TERM1 0x04
547#define HCC_ACT_TERM2 0x08
548#define HCC_AUTO_TERM 0x10
549#define HCC_EN_PWR 0x80
550
551/* Bit Definition for HCB_Flags */
552#define HCF_EXPECT_DISC 0x01
553#define HCF_EXPECT_SELECT 0x02
554#define HCF_EXPECT_RESET 0x10
555#define HCF_EXPECT_DONE_DISC 0x20
556
557/******************************************************************
558 Serial EEProm
559*******************************************************************/
560
561typedef struct _NVRAM_SCSI { /* SCSI channel configuration */
Alan Cox72d39fe2007-05-21 15:06:43 +0100562 u8 NVM_ChSCSIID; /* 0Ch -> Channel SCSI ID */
563 u8 NVM_ChConfig1; /* 0Dh -> Channel config 1 */
564 u8 NVM_ChConfig2; /* 0Eh -> Channel config 2 */
565 u8 NVM_NumOfTarg; /* 0Fh -> Number of SCSI target */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566 /* SCSI target configuration */
Alan Cox72d39fe2007-05-21 15:06:43 +0100567 u8 NVM_Targ0Config; /* 10h -> Target 0 configuration */
568 u8 NVM_Targ1Config; /* 11h -> Target 1 configuration */
569 u8 NVM_Targ2Config; /* 12h -> Target 2 configuration */
570 u8 NVM_Targ3Config; /* 13h -> Target 3 configuration */
571 u8 NVM_Targ4Config; /* 14h -> Target 4 configuration */
572 u8 NVM_Targ5Config; /* 15h -> Target 5 configuration */
573 u8 NVM_Targ6Config; /* 16h -> Target 6 configuration */
574 u8 NVM_Targ7Config; /* 17h -> Target 7 configuration */
575 u8 NVM_Targ8Config; /* 18h -> Target 8 configuration */
576 u8 NVM_Targ9Config; /* 19h -> Target 9 configuration */
577 u8 NVM_TargAConfig; /* 1Ah -> Target A configuration */
578 u8 NVM_TargBConfig; /* 1Bh -> Target B configuration */
579 u8 NVM_TargCConfig; /* 1Ch -> Target C configuration */
580 u8 NVM_TargDConfig; /* 1Dh -> Target D configuration */
581 u8 NVM_TargEConfig; /* 1Eh -> Target E configuration */
582 u8 NVM_TargFConfig; /* 1Fh -> Target F configuration */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700583} NVRAM_SCSI;
584
585typedef struct _NVRAM {
586/*----------header ---------------*/
Alan Cox72d39fe2007-05-21 15:06:43 +0100587 u16 NVM_Signature; /* 0,1: Signature */
588 u8 NVM_Size; /* 2: Size of data structure */
589 u8 NVM_Revision; /* 3: Revision of data structure */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700590 /* ----Host Adapter Structure ---- */
Alan Cox72d39fe2007-05-21 15:06:43 +0100591 u8 NVM_ModelByte0; /* 4: Model number (byte 0) */
592 u8 NVM_ModelByte1; /* 5: Model number (byte 1) */
593 u8 NVM_ModelInfo; /* 6: Model information */
594 u8 NVM_NumOfCh; /* 7: Number of SCSI channel */
595 u8 NVM_BIOSConfig1; /* 8: BIOS configuration 1 */
596 u8 NVM_BIOSConfig2; /* 9: BIOS configuration 2 */
597 u8 NVM_HAConfig1; /* A: Hoat adapter configuration 1 */
598 u8 NVM_HAConfig2; /* B: Hoat adapter configuration 2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700599 NVRAM_SCSI NVM_SCSIInfo[2];
Alan Cox72d39fe2007-05-21 15:06:43 +0100600 u8 NVM_reserved[10];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700601 /* ---------- CheckSum ---------- */
Alan Cox72d39fe2007-05-21 15:06:43 +0100602 u16 NVM_CheckSum; /* 0x3E, 0x3F: Checksum of NVRam */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700603} NVRAM, *PNVRAM;
604
605/* Bios Configuration for nvram->BIOSConfig1 */
606#define NBC1_ENABLE 0x01 /* BIOS enable */
607#define NBC1_8DRIVE 0x02 /* Support more than 2 drives */
608#define NBC1_REMOVABLE 0x04 /* Support removable drive */
609#define NBC1_INT19 0x08 /* Intercept int 19h */
610#define NBC1_BIOSSCAN 0x10 /* Dynamic BIOS scan */
611#define NBC1_LUNSUPPORT 0x40 /* Support LUN */
612
613/* HA Configuration Byte 1 */
614#define NHC1_BOOTIDMASK 0x0F /* Boot ID number */
615#define NHC1_LUNMASK 0x70 /* Boot LUN number */
616#define NHC1_CHANMASK 0x80 /* Boot Channel number */
617
618/* Bit definition for nvram->SCSIconfig1 */
619#define NCC1_BUSRESET 0x01 /* Reset SCSI bus at power up */
620#define NCC1_PARITYCHK 0x02 /* SCSI parity enable */
621#define NCC1_ACTTERM1 0x04 /* Enable active terminator 1 */
622#define NCC1_ACTTERM2 0x08 /* Enable active terminator 2 */
623#define NCC1_AUTOTERM 0x10 /* Enable auto terminator */
624#define NCC1_PWRMGR 0x80 /* Enable power management */
625
626/* Bit definition for SCSI Target configuration byte */
627#define NTC_DISCONNECT 0x08 /* Enable SCSI disconnect */
628#define NTC_SYNC 0x10 /* SYNC_NEGO */
629#define NTC_NO_WDTR 0x20 /* SYNC_NEGO */
630#define NTC_1GIGA 0x40 /* 255 head / 63 sectors (64/32) */
631#define NTC_SPINUP 0x80 /* Start disk drive */
632
633/* Default NVRam values */
634#define INI_SIGNATURE 0xC925
635#define NBC1_DEFAULT (NBC1_ENABLE)
636#define NCC1_DEFAULT (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK)
637#define NTC_DEFAULT (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT)
638
639/* SCSI related definition */
640#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */
641#define DISC_ALLOW 0xC0 /* Disconnect is allowed */
642#define SCSICMD_RequestSense 0x03
643
Linus Torvalds1da177e2005-04-16 15:20:36 -0700644#define SCSI_ABORT_SNOOZE 0
645#define SCSI_ABORT_SUCCESS 1
646#define SCSI_ABORT_PENDING 2
647#define SCSI_ABORT_BUSY 3
648#define SCSI_ABORT_NOT_RUNNING 4
649#define SCSI_ABORT_ERROR 5
650
651#define SCSI_RESET_SNOOZE 0
652#define SCSI_RESET_PUNT 1
653#define SCSI_RESET_SUCCESS 2
654#define SCSI_RESET_PENDING 3
655#define SCSI_RESET_WAKEUP 4
656#define SCSI_RESET_NOT_RUNNING 5
657#define SCSI_RESET_ERROR 6
658
659#define SCSI_RESET_SYNCHRONOUS 0x01
660#define SCSI_RESET_ASYNCHRONOUS 0x02
661#define SCSI_RESET_SUGGEST_BUS_RESET 0x04
662#define SCSI_RESET_SUGGEST_HOST_RESET 0x08
663
664#define SCSI_RESET_BUS_RESET 0x100
665#define SCSI_RESET_HOST_RESET 0x200
666#define SCSI_RESET_ACTION 0xff
667