blob: c0ac728dc5645ba6b5f7d2a213d9903b0a88a1e7 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Madge Horizon ATM Adapter driver.
3 Copyright (C) 1995-1999 Madge Networks Ltd.
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18
19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
20 system and in the file COPYING in the Linux kernel source.
21*/
22
23/*
24 IMPORTANT NOTE: Madge Networks no longer makes the adapters
25 supported by this driver and makes no commitment to maintain it.
26*/
27
28#include <linux/module.h>
29#include <linux/kernel.h>
30#include <linux/mm.h>
31#include <linux/pci.h>
32#include <linux/errno.h>
33#include <linux/atm.h>
34#include <linux/atmdev.h>
35#include <linux/sonet.h>
36#include <linux/skbuff.h>
37#include <linux/time.h>
38#include <linux/delay.h>
39#include <linux/uio.h>
40#include <linux/init.h>
41#include <linux/ioport.h>
42#include <linux/wait.h>
43
44#include <asm/system.h>
45#include <asm/io.h>
46#include <asm/atomic.h>
47#include <asm/uaccess.h>
48#include <asm/string.h>
49#include <asm/byteorder.h>
50
51#include "horizon.h"
52
53#define maintainer_string "Giuliano Procida at Madge Networks <gprocida@madge.com>"
54#define description_string "Madge ATM Horizon [Ultra] driver"
55#define version_string "1.2.1"
56
57static inline void __init show_version (void) {
58 printk ("%s version %s\n", description_string, version_string);
59}
60
61/*
62
63 CREDITS
64
65 Driver and documentation by:
66
67 Chris Aston Madge Networks
68 Giuliano Procida Madge Networks
69 Simon Benham Madge Networks
70 Simon Johnson Madge Networks
71 Various Others Madge Networks
72
73 Some inspiration taken from other drivers by:
74
75 Alexandru Cucos UTBv
76 Kari Mettinen University of Helsinki
77 Werner Almesberger EPFL LRC
78
79 Theory of Operation
80
81 I Hardware, detection, initialisation and shutdown.
82
83 1. Supported Hardware
84
85 This driver should handle all variants of the PCI Madge ATM adapters
86 with the Horizon chipset. These are all PCI cards supporting PIO, BM
87 DMA and a form of MMIO (registers only, not internal RAM).
88
89 The driver is only known to work with SONET and UTP Horizon Ultra
90 cards at 155Mb/s. However, code is in place to deal with both the
91 original Horizon and 25Mb/s operation.
92
93 There are two revisions of the Horizon ASIC: the original and the
94 Ultra. Details of hardware bugs are in section III.
95
96 The ASIC version can be distinguished by chip markings but is NOT
97 indicated by the PCI revision (all adapters seem to have PCI rev 1).
98
99 I believe that:
100
101 Horizon => Collage 25 PCI Adapter (UTP and STP)
102 Horizon Ultra => Collage 155 PCI Client (UTP or SONET)
103 Ambassador x => Collage 155 PCI Server (completely different)
104
105 Horizon (25Mb/s) is fitted with UTP and STP connectors. It seems to
106 have a Madge B154 plus glue logic serializer. I have also found a
107 really ancient version of this with slightly different glue. It
108 comes with the revision 0 (140-025-01) ASIC.
109
110 Horizon Ultra (155Mb/s) is fitted with either a Pulse Medialink
111 output (UTP) or an HP HFBR 5205 output (SONET). It has either
112 Madge's SAMBA framer or a SUNI-lite device (early versions). It
113 comes with the revision 1 (140-027-01) ASIC.
114
115 2. Detection
116
117 All Horizon-based cards present with the same PCI Vendor and Device
118 IDs. The standard Linux 2.2 PCI API is used to locate any cards and
119 to enable bus-mastering (with appropriate latency).
120
121 ATM_LAYER_STATUS in the control register distinguishes between the
122 two possible physical layers (25 and 155). It is not clear whether
123 the 155 cards can also operate at 25Mbps. We rely on the fact that a
124 card operates at 155 if and only if it has the newer Horizon Ultra
125 ASIC.
126
127 For 155 cards the two possible framers are probed for and then set
128 up for loop-timing.
129
130 3. Initialisation
131
132 The card is reset and then put into a known state. The physical
133 layer is configured for normal operation at the appropriate speed;
134 in the case of the 155 cards, the framer is initialised with
135 line-based timing; the internal RAM is zeroed and the allocation of
136 buffers for RX and TX is made; the Burnt In Address is read and
137 copied to the ATM ESI; various policy settings for RX (VPI bits,
138 unknown VCs, oam cells) are made. Ideally all policy items should be
139 configurable at module load (if not actually on-demand), however,
140 only the vpi vs vci bit allocation can be specified at insmod.
141
142 4. Shutdown
143
144 This is in response to module_cleaup. No VCs are in use and the card
145 should be idle; it is reset.
146
147 II Driver software (as it should be)
148
149 0. Traffic Parameters
150
151 The traffic classes (not an enumeration) are currently: ATM_NONE (no
152 traffic), ATM_UBR, ATM_CBR, ATM_VBR and ATM_ABR, ATM_ANYCLASS
153 (compatible with everything). Together with (perhaps only some of)
154 the following items they make up the traffic specification.
155
156 struct atm_trafprm {
157 unsigned char traffic_class; traffic class (ATM_UBR, ...)
158 int max_pcr; maximum PCR in cells per second
159 int pcr; desired PCR in cells per second
160 int min_pcr; minimum PCR in cells per second
161 int max_cdv; maximum CDV in microseconds
162 int max_sdu; maximum SDU in bytes
163 };
164
165 Note that these denote bandwidth available not bandwidth used; the
166 possibilities according to ATMF are:
167
168 Real Time (cdv and max CDT given)
169
170 CBR(pcr) pcr bandwidth always available
171 rtVBR(pcr,scr,mbs) scr bandwidth always available, upto pcr at mbs too
172
173 Non Real Time
174
175 nrtVBR(pcr,scr,mbs) scr bandwidth always available, upto pcr at mbs too
176 UBR()
177 ABR(mcr,pcr) mcr bandwidth always available, upto pcr (depending) too
178
179 mbs is max burst size (bucket)
180 pcr and scr have associated cdvt values
181 mcr is like scr but has no cdtv
182 cdtv may differ at each hop
183
184 Some of the above items are qos items (as opposed to traffic
185 parameters). We have nothing to do with qos. All except ABR can have
186 their traffic parameters converted to GCRA parameters. The GCRA may
187 be implemented as a (real-number) leaky bucket. The GCRA can be used
188 in complicated ways by switches and in simpler ways by end-stations.
189 It can be used both to filter incoming cells and shape out-going
190 cells.
191
192 ATM Linux actually supports:
193
194 ATM_NONE() (no traffic in this direction)
195 ATM_UBR(max_frame_size)
196 ATM_CBR(max/min_pcr, max_cdv, max_frame_size)
197
198 0 or ATM_MAX_PCR are used to indicate maximum available PCR
199
200 A traffic specification consists of the AAL type and separate
201 traffic specifications for either direction. In ATM Linux it is:
202
203 struct atm_qos {
204 struct atm_trafprm txtp;
205 struct atm_trafprm rxtp;
206 unsigned char aal;
207 };
208
209 AAL types are:
210
211 ATM_NO_AAL AAL not specified
212 ATM_AAL0 "raw" ATM cells
213 ATM_AAL1 AAL1 (CBR)
214 ATM_AAL2 AAL2 (VBR)
215 ATM_AAL34 AAL3/4 (data)
216 ATM_AAL5 AAL5 (data)
217 ATM_SAAL signaling AAL
218
219 The Horizon has support for AAL frame types: 0, 3/4 and 5. However,
220 it does not implement AAL 3/4 SAR and it has a different notion of
221 "raw cell" to ATM Linux's (48 bytes vs. 52 bytes) so neither are
222 supported by this driver.
223
224 The Horizon has limited support for ABR (including UBR), VBR and
225 CBR. Each TX channel has a bucket (containing up to 31 cell units)
226 and two timers (PCR and SCR) associated with it that can be used to
227 govern cell emissions and host notification (in the case of ABR this
228 is presumably so that RM cells may be emitted at appropriate times).
229 The timers may either be disabled or may be set to any of 240 values
230 (determined by the clock crystal, a fixed (?) per-device divider, a
231 configurable divider and a configurable timer preload value).
232
233 At the moment only UBR and CBR are supported by the driver. VBR will
234 be supported as soon as ATM for Linux supports it. ABR support is
235 very unlikely as RM cell handling is completely up to the driver.
236
237 1. TX (TX channel setup and TX transfer)
238
239 The TX half of the driver owns the TX Horizon registers. The TX
240 component in the IRQ handler is the BM completion handler. This can
241 only be entered when tx_busy is true (enforced by hardware). The
242 other TX component can only be entered when tx_busy is false
243 (enforced by driver). So TX is single-threaded.
244
245 Apart from a minor optimisation to not re-select the last channel,
246 the TX send component works as follows:
247
248 Atomic test and set tx_busy until we succeed; we should implement
249 some sort of timeout so that tx_busy will never be stuck at true.
250
251 If no TX channel is set up for this VC we wait for an idle one (if
252 necessary) and set it up.
253
254 At this point we have a TX channel ready for use. We wait for enough
255 buffers to become available then start a TX transmit (set the TX
256 descriptor, schedule transfer, exit).
257
258 The IRQ component handles TX completion (stats, free buffer, tx_busy
259 unset, exit). We also re-schedule further transfers for the same
260 frame if needed.
261
262 TX setup in more detail:
263
264 TX open is a nop, the relevant information is held in the hrz_vcc
265 (vcc->dev_data) structure and is "cached" on the card.
266
267 TX close gets the TX lock and clears the channel from the "cache".
268
269 2. RX (Data Available and RX transfer)
270
271 The RX half of the driver owns the RX registers. There are two RX
272 components in the IRQ handler: the data available handler deals with
273 fresh data that has arrived on the card, the BM completion handler
274 is very similar to the TX completion handler. The data available
275 handler grabs the rx_lock and it is only released once the data has
276 been discarded or completely transferred to the host. The BM
277 completion handler only runs when the lock is held; the data
278 available handler is locked out over the same period.
279
280 Data available on the card triggers an interrupt. If the data is not
281 suitable for our existing RX channels or we cannot allocate a buffer
282 it is flushed. Otherwise an RX receive is scheduled. Multiple RX
283 transfers may be scheduled for the same frame.
284
285 RX setup in more detail:
286
287 RX open...
288 RX close...
289
290 III Hardware Bugs
291
292 0. Byte vs Word addressing of adapter RAM.
293
294 A design feature; see the .h file (especially the memory map).
295
296 1. Bus Master Data Transfers (original Horizon only, fixed in Ultra)
297
298 The host must not start a transmit direction transfer at a
299 non-four-byte boundary in host memory. Instead the host should
300 perform a byte, or a two byte, or one byte followed by two byte
301 transfer in order to start the rest of the transfer on a four byte
302 boundary. RX is OK.
303
304 Simultaneous transmit and receive direction bus master transfers are
305 not allowed.
306
307 The simplest solution to these two is to always do PIO (never DMA)
308 in the TX direction on the original Horizon. More complicated
309 solutions are likely to hurt my brain.
310
311 2. Loss of buffer on close VC
312
313 When a VC is being closed, the buffer associated with it is not
314 returned to the pool. The host must store the reference to this
315 buffer and when opening a new VC then give it to that new VC.
316
317 The host intervention currently consists of stacking such a buffer
318 pointer at VC close and checking the stack at VC open.
319
320 3. Failure to close a VC
321
322 If a VC is currently receiving a frame then closing the VC may fail
323 and the frame continues to be received.
324
325 The solution is to make sure any received frames are flushed when
326 ready. This is currently done just before the solution to 2.
327
328 4. PCI bus (original Horizon only, fixed in Ultra)
329
330 Reading from the data port prior to initialisation will hang the PCI
331 bus. Just don't do that then! We don't.
332
333 IV To Do List
334
335 . Timer code may be broken.
336
337 . Allow users to specify buffer allocation split for TX and RX.
338
339 . Deal once and for all with buggy VC close.
340
341 . Handle interrupted and/or non-blocking operations.
342
343 . Change some macros to functions and move from .h to .c.
344
345 . Try to limit the number of TX frames each VC may have queued, in
346 order to reduce the chances of TX buffer exhaustion.
347
348 . Implement VBR (bucket and timers not understood) and ABR (need to
349 do RM cells manually); also no Linux support for either.
350
351 . Implement QoS changes on open VCs (involves extracting parts of VC open
352 and close into separate functions and using them to make changes).
353
354*/
355
356/********** globals **********/
357
358static void do_housekeeping (unsigned long arg);
359
360static unsigned short debug = 0;
361static unsigned short vpi_bits = 0;
362static int max_tx_size = 9000;
363static int max_rx_size = 9000;
364static unsigned char pci_lat = 0;
365
366/********** access functions **********/
367
368/* Read / Write Horizon registers */
369static inline void wr_regl (const hrz_dev * dev, unsigned char reg, u32 data) {
370 outl (cpu_to_le32 (data), dev->iobase + reg);
371}
372
373static inline u32 rd_regl (const hrz_dev * dev, unsigned char reg) {
374 return le32_to_cpu (inl (dev->iobase + reg));
375}
376
377static inline void wr_regw (const hrz_dev * dev, unsigned char reg, u16 data) {
378 outw (cpu_to_le16 (data), dev->iobase + reg);
379}
380
381static inline u16 rd_regw (const hrz_dev * dev, unsigned char reg) {
382 return le16_to_cpu (inw (dev->iobase + reg));
383}
384
385static inline void wrs_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) {
386 outsb (dev->iobase + reg, addr, len);
387}
388
389static inline void rds_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) {
390 insb (dev->iobase + reg, addr, len);
391}
392
393/* Read / Write to a given address in Horizon buffer memory.
394 Interrupts must be disabled between the address register and data
395 port accesses as these must form an atomic operation. */
396static inline void wr_mem (const hrz_dev * dev, HDW * addr, u32 data) {
397 // wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr);
398 wr_regl (dev, MEM_WR_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW));
399 wr_regl (dev, MEMORY_PORT_OFF, data);
400}
401
402static inline u32 rd_mem (const hrz_dev * dev, HDW * addr) {
403 // wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr);
404 wr_regl (dev, MEM_RD_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW));
405 return rd_regl (dev, MEMORY_PORT_OFF);
406}
407
408static inline void wr_framer (const hrz_dev * dev, u32 addr, u32 data) {
409 wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr | 0x80000000);
410 wr_regl (dev, MEMORY_PORT_OFF, data);
411}
412
413static inline u32 rd_framer (const hrz_dev * dev, u32 addr) {
414 wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr | 0x80000000);
415 return rd_regl (dev, MEMORY_PORT_OFF);
416}
417
418/********** specialised access functions **********/
419
420/* RX */
421
422static inline void FLUSH_RX_CHANNEL (hrz_dev * dev, u16 channel) {
423 wr_regw (dev, RX_CHANNEL_PORT_OFF, FLUSH_CHANNEL | channel);
424 return;
425}
426
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700427static void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428 while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & FLUSH_CHANNEL)
429 ;
430 return;
431}
432
433static inline void SELECT_RX_CHANNEL (hrz_dev * dev, u16 channel) {
434 wr_regw (dev, RX_CHANNEL_PORT_OFF, channel);
435 return;
436}
437
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700438static void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439 while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & RX_CHANNEL_UPDATE_IN_PROGRESS)
440 ;
441 return;
442}
443
444/* TX */
445
446static inline void SELECT_TX_CHANNEL (hrz_dev * dev, u16 tx_channel) {
447 wr_regl (dev, TX_CHANNEL_PORT_OFF, tx_channel);
448 return;
449}
450
451/* Update or query one configuration parameter of a particular channel. */
452
453static inline void update_tx_channel_config (hrz_dev * dev, short chan, u8 mode, u16 value) {
454 wr_regw (dev, TX_CHANNEL_CONFIG_COMMAND_OFF,
455 chan * TX_CHANNEL_CONFIG_MULT | mode);
456 wr_regw (dev, TX_CHANNEL_CONFIG_DATA_OFF, value);
457 return;
458}
459
460static inline u16 query_tx_channel_config (hrz_dev * dev, short chan, u8 mode) {
461 wr_regw (dev, TX_CHANNEL_CONFIG_COMMAND_OFF,
462 chan * TX_CHANNEL_CONFIG_MULT | mode);
463 return rd_regw (dev, TX_CHANNEL_CONFIG_DATA_OFF);
464}
465
466/********** dump functions **********/
467
468static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * skb) {
469#ifdef DEBUG_HORIZON
470 unsigned int i;
471 unsigned char * data = skb->data;
472 PRINTDB (DBG_DATA, "%s(%u) ", prefix, vc);
473 for (i=0; i<skb->len && i < 256;i++)
474 PRINTDM (DBG_DATA, "%02x ", data[i]);
475 PRINTDE (DBG_DATA,"");
476#else
477 (void) prefix;
478 (void) vc;
479 (void) skb;
480#endif
481 return;
482}
483
484static inline void dump_regs (hrz_dev * dev) {
485#ifdef DEBUG_HORIZON
486 PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG));
487 PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF));
488 PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF));
489 PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF));
490 PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF));
491 PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF));
492#else
493 (void) dev;
494#endif
495 return;
496}
497
498static inline void dump_framer (hrz_dev * dev) {
499#ifdef DEBUG_HORIZON
500 unsigned int i;
501 PRINTDB (DBG_REGS, "framer registers:");
502 for (i = 0; i < 0x10; ++i)
503 PRINTDM (DBG_REGS, " %02x", rd_framer (dev, i));
504 PRINTDE (DBG_REGS,"");
505#else
506 (void) dev;
507#endif
508 return;
509}
510
511/********** VPI/VCI <-> (RX) channel conversions **********/
512
513/* RX channels are 10 bit integers, these fns are quite paranoid */
514
515static inline int channel_to_vpivci (const u16 channel, short * vpi, int * vci) {
516 unsigned short vci_bits = 10 - vpi_bits;
517 if ((channel & RX_CHANNEL_MASK) == channel) {
518 *vci = channel & ((~0)<<vci_bits);
519 *vpi = channel >> vci_bits;
520 return channel ? 0 : -EINVAL;
521 }
522 return -EINVAL;
523}
524
525static inline int vpivci_to_channel (u16 * channel, const short vpi, const int vci) {
526 unsigned short vci_bits = 10 - vpi_bits;
527 if (0 <= vpi && vpi < 1<<vpi_bits && 0 <= vci && vci < 1<<vci_bits) {
528 *channel = vpi<<vci_bits | vci;
529 return *channel ? 0 : -EINVAL;
530 }
531 return -EINVAL;
532}
533
534/********** decode RX queue entries **********/
535
536static inline u16 rx_q_entry_to_length (u32 x) {
537 return x & RX_Q_ENTRY_LENGTH_MASK;
538}
539
540static inline u16 rx_q_entry_to_rx_channel (u32 x) {
541 return (x>>RX_Q_ENTRY_CHANNEL_SHIFT) & RX_CHANNEL_MASK;
542}
543
544/* Cell Transmit Rate Values
545 *
546 * the cell transmit rate (cells per sec) can be set to a variety of
547 * different values by specifying two parameters: a timer preload from
548 * 1 to 16 (stored as 0 to 15) and a clock divider (2 to the power of
549 * an exponent from 0 to 14; the special value 15 disables the timer).
550 *
551 * cellrate = baserate / (preload * 2^divider)
552 *
553 * The maximum cell rate that can be specified is therefore just the
554 * base rate. Halving the preload is equivalent to adding 1 to the
555 * divider and so values 1 to 8 of the preload are redundant except
556 * in the case of a maximal divider (14).
557 *
558 * Given a desired cell rate, an algorithm to determine the preload
559 * and divider is:
560 *
561 * a) x = baserate / cellrate, want p * 2^d = x (as far as possible)
562 * b) if x > 16 * 2^14 then set p = 16, d = 14 (min rate), done
563 * if x <= 16 then set p = x, d = 0 (high rates), done
564 * c) now have 16 < x <= 2^18, or 1 < x/16 <= 2^14 and we want to
565 * know n such that 2^(n-1) < x/16 <= 2^n, so slide a bit until
566 * we find the range (n will be between 1 and 14), set d = n
567 * d) Also have 8 < x/2^n <= 16, so set p nearest x/2^n
568 *
569 * The algorithm used below is a minor variant of the above.
570 *
571 * The base rate is derived from the oscillator frequency (Hz) using a
572 * fixed divider:
573 *
574 * baserate = freq / 32 in the case of some Unknown Card
575 * baserate = freq / 8 in the case of the Horizon 25
576 * baserate = freq / 8 in the case of the Horizon Ultra 155
577 *
578 * The Horizon cards have oscillators and base rates as follows:
579 *
580 * Card Oscillator Base Rate
581 * Unknown Card 33 MHz 1.03125 MHz (33 MHz = PCI freq)
582 * Horizon 25 32 MHz 4 MHz
583 * Horizon Ultra 155 40 MHz 5 MHz
584 *
585 * The following defines give the base rates in Hz. These were
586 * previously a factor of 100 larger, no doubt someone was using
587 * cps*100.
588 */
589
590#define BR_UKN 1031250l
591#define BR_HRZ 4000000l
592#define BR_ULT 5000000l
593
594// d is an exponent
595#define CR_MIND 0
596#define CR_MAXD 14
597
598// p ranges from 1 to a power of 2
599#define CR_MAXPEXP 4
600
601static int make_rate (const hrz_dev * dev, u32 c, rounding r,
602 u16 * bits, unsigned int * actual)
603{
604 // note: rounding the rate down means rounding 'p' up
605 const unsigned long br = test_bit(ultra, &dev->flags) ? BR_ULT : BR_HRZ;
606
607 u32 div = CR_MIND;
608 u32 pre;
609
610 // br_exp and br_man are used to avoid overflowing (c*maxp*2^d) in
611 // the tests below. We could think harder about exact possibilities
612 // of failure...
613
614 unsigned long br_man = br;
615 unsigned int br_exp = 0;
616
617 PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c,
618 r == round_up ? "up" : r == round_down ? "down" : "nearest");
619
620 // avoid div by zero
621 if (!c) {
622 PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");
623 return -EINVAL;
624 }
625
626 while (br_exp < CR_MAXPEXP + CR_MIND && (br_man % 2 == 0)) {
627 br_man = br_man >> 1;
628 ++br_exp;
629 }
630 // (br >>br_exp) <<br_exp == br and
631 // br_exp <= CR_MAXPEXP+CR_MIND
632
633 if (br_man <= (c << (CR_MAXPEXP+CR_MIND-br_exp))) {
634 // Equivalent to: B <= (c << (MAXPEXP+MIND))
635 // take care of rounding
636 switch (r) {
637 case round_down:
638 pre = (br+(c<<div)-1)/(c<<div);
639 // but p must be non-zero
640 if (!pre)
641 pre = 1;
642 break;
643 case round_nearest:
644 pre = (br+(c<<div)/2)/(c<<div);
645 // but p must be non-zero
646 if (!pre)
647 pre = 1;
648 break;
649 default: /* round_up */
650 pre = br/(c<<div);
651 // but p must be non-zero
652 if (!pre)
653 return -EINVAL;
654 }
655 PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div);
656 goto got_it;
657 }
658
659 // at this point we have
660 // d == MIND and (c << (MAXPEXP+MIND)) < B
661 while (div < CR_MAXD) {
662 div++;
663 if (br_man <= (c << (CR_MAXPEXP+div-br_exp))) {
664 // Equivalent to: B <= (c << (MAXPEXP+d))
665 // c << (MAXPEXP+d-1) < B <= c << (MAXPEXP+d)
666 // 1 << (MAXPEXP-1) < B/2^d/c <= 1 << MAXPEXP
667 // MAXP/2 < B/c2^d <= MAXP
668 // take care of rounding
669 switch (r) {
670 case round_down:
671 pre = (br+(c<<div)-1)/(c<<div);
672 break;
673 case round_nearest:
674 pre = (br+(c<<div)/2)/(c<<div);
675 break;
676 default: /* round_up */
677 pre = br/(c<<div);
678 }
679 PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div);
680 goto got_it;
681 }
682 }
683 // at this point we have
684 // d == MAXD and (c << (MAXPEXP+MAXD)) < B
685 // but we cannot go any higher
686 // take care of rounding
687 if (r == round_down)
688 return -EINVAL;
689 pre = 1 << CR_MAXPEXP;
690 PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div);
691got_it:
692 // paranoia
693 if (div > CR_MAXD || (!pre) || pre > 1<<CR_MAXPEXP) {
694 PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u",
695 div, pre);
696 return -EINVAL;
697 } else {
698 if (bits)
699 *bits = (div<<CLOCK_SELECT_SHIFT) | (pre-1);
700 if (actual) {
701 *actual = (br + (pre<<div) - 1) / (pre<<div);
702 PRINTD (DBG_QOS, "actual rate: %u", *actual);
703 }
704 return 0;
705 }
706}
707
708static int make_rate_with_tolerance (const hrz_dev * dev, u32 c, rounding r, unsigned int tol,
709 u16 * bit_pattern, unsigned int * actual) {
710 unsigned int my_actual;
711
712 PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u",
713 c, (r == round_up) ? "up" : (r == round_down) ? "down" : "nearest", tol);
714
715 if (!actual)
716 // actual rate is not returned
717 actual = &my_actual;
718
719 if (make_rate (dev, c, round_nearest, bit_pattern, actual))
720 // should never happen as round_nearest always succeeds
721 return -1;
722
723 if (c - tol <= *actual && *actual <= c + tol)
724 // within tolerance
725 return 0;
726 else
727 // intolerant, try rounding instead
728 return make_rate (dev, c, r, bit_pattern, actual);
729}
730
731/********** Listen on a VC **********/
732
733static int hrz_open_rx (hrz_dev * dev, u16 channel) {
734 // is there any guarantee that we don't get two simulataneous
735 // identical calls of this function from different processes? yes
736 // rate_lock
737 unsigned long flags;
738 u32 channel_type; // u16?
739
740 u16 buf_ptr = RX_CHANNEL_IDLE;
741
742 rx_ch_desc * rx_desc = &memmap->rx_descs[channel];
743
744 PRINTD (DBG_FLOW, "hrz_open_rx %x", channel);
745
746 spin_lock_irqsave (&dev->mem_lock, flags);
747 channel_type = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK;
748 spin_unlock_irqrestore (&dev->mem_lock, flags);
749
750 // very serious error, should never occur
751 if (channel_type != RX_CHANNEL_DISABLED) {
752 PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open");
753 return -EBUSY; // clean up?
754 }
755
756 // Give back spare buffer
757 if (dev->noof_spare_buffers) {
758 buf_ptr = dev->spare_buffers[--dev->noof_spare_buffers];
759 PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr);
760 // should never occur
761 if (buf_ptr == RX_CHANNEL_DISABLED || buf_ptr == RX_CHANNEL_IDLE) {
762 // but easy to recover from
763 PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE");
764 buf_ptr = RX_CHANNEL_IDLE;
765 }
766 } else {
767 PRINTD (DBG_VCC, "using IDLE buffer pointer");
768 }
769
770 // Channel is currently disabled so change its status to idle
771
772 // do we really need to save the flags again?
773 spin_lock_irqsave (&dev->mem_lock, flags);
774
775 wr_mem (dev, &rx_desc->wr_buf_type,
776 buf_ptr | CHANNEL_TYPE_AAL5 | FIRST_CELL_OF_AAL5_FRAME);
777 if (buf_ptr != RX_CHANNEL_IDLE)
778 wr_mem (dev, &rx_desc->rd_buf_type, buf_ptr);
779
780 spin_unlock_irqrestore (&dev->mem_lock, flags);
781
782 // rxer->rate = make_rate (qos->peak_cells);
783
784 PRINTD (DBG_FLOW, "hrz_open_rx ok");
785
786 return 0;
787}
788
789#if 0
790/********** change vc rate for a given vc **********/
791
792static void hrz_change_vc_qos (ATM_RXER * rxer, MAAL_QOS * qos) {
793 rxer->rate = make_rate (qos->peak_cells);
794}
795#endif
796
797/********** free an skb (as per ATM device driver documentation) **********/
798
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700799static void hrz_kfree_skb (struct sk_buff * skb) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800 if (ATM_SKB(skb)->vcc->pop) {
801 ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
802 } else {
803 dev_kfree_skb_any (skb);
804 }
805}
806
807/********** cancel listen on a VC **********/
808
809static void hrz_close_rx (hrz_dev * dev, u16 vc) {
810 unsigned long flags;
811
812 u32 value;
813
814 u32 r1, r2;
815
816 rx_ch_desc * rx_desc = &memmap->rx_descs[vc];
817
818 int was_idle = 0;
819
820 spin_lock_irqsave (&dev->mem_lock, flags);
821 value = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK;
822 spin_unlock_irqrestore (&dev->mem_lock, flags);
823
824 if (value == RX_CHANNEL_DISABLED) {
825 // I suppose this could happen once we deal with _NONE traffic properly
826 PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc);
827 return;
828 }
829 if (value == RX_CHANNEL_IDLE)
830 was_idle = 1;
831
832 spin_lock_irqsave (&dev->mem_lock, flags);
833
834 for (;;) {
835 wr_mem (dev, &rx_desc->wr_buf_type, RX_CHANNEL_DISABLED);
836
837 if ((rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK) == RX_CHANNEL_DISABLED)
838 break;
839
840 was_idle = 0;
841 }
842
843 if (was_idle) {
844 spin_unlock_irqrestore (&dev->mem_lock, flags);
845 return;
846 }
847
848 WAIT_FLUSH_RX_COMPLETE(dev);
849
850 // XXX Is this all really necessary? We can rely on the rx_data_av
851 // handler to discard frames that remain queued for delivery. If the
852 // worry is that immediately reopening the channel (perhaps by a
853 // different process) may cause some data to be mis-delivered then
854 // there may still be a simpler solution (such as busy-waiting on
855 // rx_busy once the channel is disabled or before a new one is
856 // opened - does this leave any holes?). Arguably setting up and
857 // tearing down the TX and RX halves of each virtual circuit could
858 // most safely be done within ?x_busy protected regions.
859
860 // OK, current changes are that Simon's marker is disabled and we DO
861 // look for NULL rxer elsewhere. The code here seems flush frames
862 // and then remember the last dead cell belonging to the channel
863 // just disabled - the cell gets relinked at the next vc_open.
864 // However, when all VCs are closed or only a few opened there are a
865 // handful of buffers that are unusable.
866
867 // Does anyone feel like documenting spare_buffers properly?
868 // Does anyone feel like fixing this in a nicer way?
869
870 // Flush any data which is left in the channel
871 for (;;) {
872 // Change the rx channel port to something different to the RX
873 // channel we are trying to close to force Horizon to flush the rx
874 // channel read and write pointers.
875
876 u16 other = vc^(RX_CHANS/2);
877
878 SELECT_RX_CHANNEL (dev, other);
879 WAIT_UPDATE_COMPLETE (dev);
880
881 r1 = rd_mem (dev, &rx_desc->rd_buf_type);
882
883 // Select this RX channel. Flush doesn't seem to work unless we
884 // select an RX channel before hand
885
886 SELECT_RX_CHANNEL (dev, vc);
887 WAIT_UPDATE_COMPLETE (dev);
888
889 // Attempt to flush a frame on this RX channel
890
891 FLUSH_RX_CHANNEL (dev, vc);
892 WAIT_FLUSH_RX_COMPLETE (dev);
893
894 // Force Horizon to flush rx channel read and write pointers as before
895
896 SELECT_RX_CHANNEL (dev, other);
897 WAIT_UPDATE_COMPLETE (dev);
898
899 r2 = rd_mem (dev, &rx_desc->rd_buf_type);
900
901 PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2);
902
903 if (r1 == r2) {
904 dev->spare_buffers[dev->noof_spare_buffers++] = (u16)r1;
905 break;
906 }
907 }
908
909#if 0
910 {
911 rx_q_entry * wr_ptr = &memmap->rx_q_entries[rd_regw (dev, RX_QUEUE_WR_PTR_OFF)];
912 rx_q_entry * rd_ptr = dev->rx_q_entry;
913
914 PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr);
915
916 while (rd_ptr != wr_ptr) {
917 u32 x = rd_mem (dev, (HDW *) rd_ptr);
918
919 if (vc == rx_q_entry_to_rx_channel (x)) {
920 x |= SIMONS_DODGEY_MARKER;
921
922 PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey");
923
924 wr_mem (dev, (HDW *) rd_ptr, x);
925 }
926
927 if (rd_ptr == dev->rx_q_wrap)
928 rd_ptr = dev->rx_q_reset;
929 else
930 rd_ptr++;
931 }
932 }
933#endif
934
935 spin_unlock_irqrestore (&dev->mem_lock, flags);
936
937 return;
938}
939
940/********** schedule RX transfers **********/
941
942// Note on tail recursion: a GCC developer said that it is not likely
943// to be fixed soon, so do not define TAILRECUSRIONWORKS unless you
944// are sure it does as you may otherwise overflow the kernel stack.
945
946// giving this fn a return value would help GCC, alledgedly
947
948static void rx_schedule (hrz_dev * dev, int irq) {
949 unsigned int rx_bytes;
950
951 int pio_instead = 0;
952#ifndef TAILRECURSIONWORKS
953 pio_instead = 1;
954 while (pio_instead) {
955#endif
956 // bytes waiting for RX transfer
957 rx_bytes = dev->rx_bytes;
958
959#if 0
960 spin_count = 0;
961 while (rd_regl (dev, MASTER_RX_COUNT_REG_OFF)) {
962 PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!");
963 if (++spin_count > 10) {
964 PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion");
965 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
966 clear_bit (rx_busy, &dev->flags);
967 hrz_kfree_skb (dev->rx_skb);
968 return;
969 }
970 }
971#endif
972
973 // this code follows the TX code but (at the moment) there is only
974 // one region - the skb itself. I don't know if this will change,
975 // but it doesn't hurt to have the code here, disabled.
976
977 if (rx_bytes) {
978 // start next transfer within same region
979 if (rx_bytes <= MAX_PIO_COUNT) {
980 PRINTD (DBG_RX|DBG_BUS, "(pio)");
981 pio_instead = 1;
982 }
983 if (rx_bytes <= MAX_TRANSFER_COUNT) {
984 PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)");
985 dev->rx_bytes = 0;
986 } else {
987 PRINTD (DBG_RX|DBG_BUS, "(continuing multi)");
988 dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT;
989 rx_bytes = MAX_TRANSFER_COUNT;
990 }
991 } else {
992 // rx_bytes == 0 -- we're between regions
993 // regions remaining to transfer
994#if 0
995 unsigned int rx_regions = dev->rx_regions;
996#else
997 unsigned int rx_regions = 0;
998#endif
999
1000 if (rx_regions) {
1001#if 0
1002 // start a new region
1003 dev->rx_addr = dev->rx_iovec->iov_base;
1004 rx_bytes = dev->rx_iovec->iov_len;
1005 ++dev->rx_iovec;
1006 dev->rx_regions = rx_regions - 1;
1007
1008 if (rx_bytes <= MAX_PIO_COUNT) {
1009 PRINTD (DBG_RX|DBG_BUS, "(pio)");
1010 pio_instead = 1;
1011 }
1012 if (rx_bytes <= MAX_TRANSFER_COUNT) {
1013 PRINTD (DBG_RX|DBG_BUS, "(full region)");
1014 dev->rx_bytes = 0;
1015 } else {
1016 PRINTD (DBG_RX|DBG_BUS, "(start multi region)");
1017 dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT;
1018 rx_bytes = MAX_TRANSFER_COUNT;
1019 }
1020#endif
1021 } else {
1022 // rx_regions == 0
1023 // that's all folks - end of frame
1024 struct sk_buff * skb = dev->rx_skb;
1025 // dev->rx_iovec = 0;
1026
1027 FLUSH_RX_CHANNEL (dev, dev->rx_channel);
1028
1029 dump_skb ("<<<", dev->rx_channel, skb);
1030
1031 PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len);
1032
1033 {
1034 struct atm_vcc * vcc = ATM_SKB(skb)->vcc;
1035 // VC layer stats
1036 atomic_inc(&vcc->stats->rx);
Patrick McHardya61bbcf2005-08-14 17:24:31 -07001037 __net_timestamp(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001038 // end of our responsability
1039 vcc->push (vcc, skb);
1040 }
1041 }
1042 }
1043
1044 // note: writing RX_COUNT clears any interrupt condition
1045 if (rx_bytes) {
1046 if (pio_instead) {
1047 if (irq)
1048 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1049 rds_regb (dev, DATA_PORT_OFF, dev->rx_addr, rx_bytes);
1050 } else {
1051 wr_regl (dev, MASTER_RX_ADDR_REG_OFF, virt_to_bus (dev->rx_addr));
1052 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, rx_bytes);
1053 }
1054 dev->rx_addr += rx_bytes;
1055 } else {
1056 if (irq)
1057 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1058 // allow another RX thread to start
1059 YELLOW_LED_ON(dev);
1060 clear_bit (rx_busy, &dev->flags);
1061 PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev);
1062 }
1063
1064#ifdef TAILRECURSIONWORKS
1065 // and we all bless optimised tail calls
1066 if (pio_instead)
1067 return rx_schedule (dev, 0);
1068 return;
1069#else
1070 // grrrrrrr!
1071 irq = 0;
1072 }
1073 return;
1074#endif
1075}
1076
1077/********** handle RX bus master complete events **********/
1078
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001079static void rx_bus_master_complete_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001080 if (test_bit (rx_busy, &dev->flags)) {
1081 rx_schedule (dev, 1);
1082 } else {
1083 PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion");
1084 // clear interrupt condition on adapter
1085 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1086 }
1087 return;
1088}
1089
1090/********** (queue to) become the next TX thread **********/
1091
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001092static int tx_hold (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001093 PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
1094 wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags)));
1095 PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
1096 if (signal_pending (current))
1097 return -1;
1098 PRINTD (DBG_TX, "set tx_busy for dev %p", dev);
1099 return 0;
1100}
1101
1102/********** allow another TX thread to start **********/
1103
1104static inline void tx_release (hrz_dev * dev) {
1105 clear_bit (tx_busy, &dev->flags);
1106 PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev);
1107 wake_up_interruptible (&dev->tx_queue);
1108}
1109
1110/********** schedule TX transfers **********/
1111
1112static void tx_schedule (hrz_dev * const dev, int irq) {
1113 unsigned int tx_bytes;
1114
1115 int append_desc = 0;
1116
1117 int pio_instead = 0;
1118#ifndef TAILRECURSIONWORKS
1119 pio_instead = 1;
1120 while (pio_instead) {
1121#endif
1122 // bytes in current region waiting for TX transfer
1123 tx_bytes = dev->tx_bytes;
1124
1125#if 0
1126 spin_count = 0;
1127 while (rd_regl (dev, MASTER_TX_COUNT_REG_OFF)) {
1128 PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!");
1129 if (++spin_count > 10) {
1130 PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion");
1131 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1132 tx_release (dev);
1133 hrz_kfree_skb (dev->tx_skb);
1134 return;
1135 }
1136 }
1137#endif
1138
1139 if (tx_bytes) {
1140 // start next transfer within same region
1141 if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) {
1142 PRINTD (DBG_TX|DBG_BUS, "(pio)");
1143 pio_instead = 1;
1144 }
1145 if (tx_bytes <= MAX_TRANSFER_COUNT) {
1146 PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)");
1147 if (!dev->tx_iovec) {
1148 // end of last region
1149 append_desc = 1;
1150 }
1151 dev->tx_bytes = 0;
1152 } else {
1153 PRINTD (DBG_TX|DBG_BUS, "(continuing multi)");
1154 dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT;
1155 tx_bytes = MAX_TRANSFER_COUNT;
1156 }
1157 } else {
1158 // tx_bytes == 0 -- we're between regions
1159 // regions remaining to transfer
1160 unsigned int tx_regions = dev->tx_regions;
1161
1162 if (tx_regions) {
1163 // start a new region
1164 dev->tx_addr = dev->tx_iovec->iov_base;
1165 tx_bytes = dev->tx_iovec->iov_len;
1166 ++dev->tx_iovec;
1167 dev->tx_regions = tx_regions - 1;
1168
1169 if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) {
1170 PRINTD (DBG_TX|DBG_BUS, "(pio)");
1171 pio_instead = 1;
1172 }
1173 if (tx_bytes <= MAX_TRANSFER_COUNT) {
1174 PRINTD (DBG_TX|DBG_BUS, "(full region)");
1175 dev->tx_bytes = 0;
1176 } else {
1177 PRINTD (DBG_TX|DBG_BUS, "(start multi region)");
1178 dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT;
1179 tx_bytes = MAX_TRANSFER_COUNT;
1180 }
1181 } else {
1182 // tx_regions == 0
1183 // that's all folks - end of frame
1184 struct sk_buff * skb = dev->tx_skb;
1185 dev->tx_iovec = NULL;
1186
1187 // VC layer stats
1188 atomic_inc(&ATM_SKB(skb)->vcc->stats->tx);
1189
1190 // free the skb
1191 hrz_kfree_skb (skb);
1192 }
1193 }
1194
1195 // note: writing TX_COUNT clears any interrupt condition
1196 if (tx_bytes) {
1197 if (pio_instead) {
1198 if (irq)
1199 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1200 wrs_regb (dev, DATA_PORT_OFF, dev->tx_addr, tx_bytes);
1201 if (append_desc)
1202 wr_regl (dev, TX_DESCRIPTOR_PORT_OFF, cpu_to_be32 (dev->tx_skb->len));
1203 } else {
1204 wr_regl (dev, MASTER_TX_ADDR_REG_OFF, virt_to_bus (dev->tx_addr));
1205 if (append_desc)
1206 wr_regl (dev, TX_DESCRIPTOR_REG_OFF, cpu_to_be32 (dev->tx_skb->len));
1207 wr_regl (dev, MASTER_TX_COUNT_REG_OFF,
1208 append_desc
1209 ? tx_bytes | MASTER_TX_AUTO_APPEND_DESC
1210 : tx_bytes);
1211 }
1212 dev->tx_addr += tx_bytes;
1213 } else {
1214 if (irq)
1215 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1216 YELLOW_LED_ON(dev);
1217 tx_release (dev);
1218 }
1219
1220#ifdef TAILRECURSIONWORKS
1221 // and we all bless optimised tail calls
1222 if (pio_instead)
1223 return tx_schedule (dev, 0);
1224 return;
1225#else
1226 // grrrrrrr!
1227 irq = 0;
1228 }
1229 return;
1230#endif
1231}
1232
1233/********** handle TX bus master complete events **********/
1234
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001235static void tx_bus_master_complete_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001236 if (test_bit (tx_busy, &dev->flags)) {
1237 tx_schedule (dev, 1);
1238 } else {
1239 PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion");
1240 // clear interrupt condition on adapter
1241 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1242 }
1243 return;
1244}
1245
1246/********** move RX Q pointer to next item in circular buffer **********/
1247
1248// called only from IRQ sub-handler
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001249static u32 rx_queue_entry_next (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001250 u32 rx_queue_entry;
1251 spin_lock (&dev->mem_lock);
1252 rx_queue_entry = rd_mem (dev, &dev->rx_q_entry->entry);
1253 if (dev->rx_q_entry == dev->rx_q_wrap)
1254 dev->rx_q_entry = dev->rx_q_reset;
1255 else
1256 dev->rx_q_entry++;
1257 wr_regw (dev, RX_QUEUE_RD_PTR_OFF, dev->rx_q_entry - dev->rx_q_reset);
1258 spin_unlock (&dev->mem_lock);
1259 return rx_queue_entry;
1260}
1261
1262/********** handle RX disabled by device **********/
1263
1264static inline void rx_disabled_handler (hrz_dev * dev) {
1265 wr_regw (dev, RX_CONFIG_OFF, rd_regw (dev, RX_CONFIG_OFF) | RX_ENABLE);
1266 // count me please
1267 PRINTK (KERN_WARNING, "RX was disabled!");
1268}
1269
1270/********** handle RX data received by device **********/
1271
1272// called from IRQ handler
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001273static void rx_data_av_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001274 u32 rx_queue_entry;
1275 u32 rx_queue_entry_flags;
1276 u16 rx_len;
1277 u16 rx_channel;
1278
1279 PRINTD (DBG_FLOW, "hrz_data_av_handler");
1280
1281 // try to grab rx lock (not possible during RX bus mastering)
1282 if (test_and_set_bit (rx_busy, &dev->flags)) {
1283 PRINTD (DBG_RX, "locked out of rx lock");
1284 return;
1285 }
1286 PRINTD (DBG_RX, "set rx_busy for dev %p", dev);
1287 // lock is cleared if we fail now, o/w after bus master completion
1288
1289 YELLOW_LED_OFF(dev);
1290
1291 rx_queue_entry = rx_queue_entry_next (dev);
1292
1293 rx_len = rx_q_entry_to_length (rx_queue_entry);
1294 rx_channel = rx_q_entry_to_rx_channel (rx_queue_entry);
1295
1296 WAIT_FLUSH_RX_COMPLETE (dev);
1297
1298 SELECT_RX_CHANNEL (dev, rx_channel);
1299
1300 PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry);
1301 rx_queue_entry_flags = rx_queue_entry & (RX_CRC_32_OK|RX_COMPLETE_FRAME|SIMONS_DODGEY_MARKER);
1302
1303 if (!rx_len) {
1304 // (at least) bus-mastering breaks if we try to handle a
1305 // zero-length frame, besides AAL5 does not support them
1306 PRINTK (KERN_ERR, "zero-length frame!");
1307 rx_queue_entry_flags &= ~RX_COMPLETE_FRAME;
1308 }
1309
1310 if (rx_queue_entry_flags & SIMONS_DODGEY_MARKER) {
1311 PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!");
1312 }
1313 if (rx_queue_entry_flags == (RX_CRC_32_OK | RX_COMPLETE_FRAME)) {
1314 struct atm_vcc * atm_vcc;
1315
1316 PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len);
1317
1318 atm_vcc = dev->rxer[rx_channel];
1319 // if no vcc is assigned to this channel, we should drop the frame
1320 // (is this what SIMONS etc. was trying to achieve?)
1321
1322 if (atm_vcc) {
1323
1324 if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) {
1325
1326 if (rx_len <= atm_vcc->qos.rxtp.max_sdu) {
1327
1328 struct sk_buff * skb = atm_alloc_charge (atm_vcc, rx_len, GFP_ATOMIC);
1329 if (skb) {
1330 // remember this so we can push it later
1331 dev->rx_skb = skb;
1332 // remember this so we can flush it later
1333 dev->rx_channel = rx_channel;
1334
1335 // prepare socket buffer
1336 skb_put (skb, rx_len);
1337 ATM_SKB(skb)->vcc = atm_vcc;
1338
1339 // simple transfer
1340 // dev->rx_regions = 0;
1341 // dev->rx_iovec = 0;
1342 dev->rx_bytes = rx_len;
1343 dev->rx_addr = skb->data;
1344 PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)",
1345 skb->data, rx_len);
1346
1347 // do the business
1348 rx_schedule (dev, 0);
1349 return;
1350
1351 } else {
1352 PRINTD (DBG_SKB|DBG_WARN, "failed to get skb");
1353 }
1354
1355 } else {
1356 PRINTK (KERN_INFO, "frame received on TX-only VC %x", rx_channel);
1357 // do we count this?
1358 }
1359
1360 } else {
1361 PRINTK (KERN_WARNING, "dropped over-size frame");
1362 // do we count this?
1363 }
1364
1365 } else {
1366 PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)");
1367 // do we count this?
1368 }
1369
1370 } else {
1371 // Wait update complete ? SPONG
1372 }
1373
1374 // RX was aborted
1375 YELLOW_LED_ON(dev);
1376
1377 FLUSH_RX_CHANNEL (dev,rx_channel);
1378 clear_bit (rx_busy, &dev->flags);
1379
1380 return;
1381}
1382
1383/********** interrupt handler **********/
1384
Jeff Garzik06efcad2007-10-19 03:10:11 -04001385static irqreturn_t interrupt_handler(int irq, void *dev_id)
1386{
1387 hrz_dev *dev = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001388 u32 int_source;
1389 unsigned int irq_ok;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001390
1391 PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id);
1392
Linus Torvalds1da177e2005-04-16 15:20:36 -07001393 // definitely for us
1394 irq_ok = 0;
1395 while ((int_source = rd_regl (dev, INT_SOURCE_REG_OFF)
1396 & INTERESTING_INTERRUPTS)) {
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001397 // In the interests of fairness, the handlers below are
Linus Torvalds1da177e2005-04-16 15:20:36 -07001398 // called in sequence and without immediate return to the head of
1399 // the while loop. This is only of issue for slow hosts (or when
1400 // debugging messages are on). Really slow hosts may find a fast
1401 // sender keeps them permanently in the IRQ handler. :(
1402
1403 // (only an issue for slow hosts) RX completion goes before
1404 // rx_data_av as the former implies rx_busy and so the latter
1405 // would just abort. If it reschedules another transfer
1406 // (continuing the same frame) then it will not clear rx_busy.
1407
1408 // (only an issue for slow hosts) TX completion goes before RX
1409 // data available as it is a much shorter routine - there is the
1410 // chance that any further transfers it schedules will be complete
1411 // by the time of the return to the head of the while loop
1412
1413 if (int_source & RX_BUS_MASTER_COMPLETE) {
1414 ++irq_ok;
1415 PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted");
1416 rx_bus_master_complete_handler (dev);
1417 }
1418 if (int_source & TX_BUS_MASTER_COMPLETE) {
1419 ++irq_ok;
1420 PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted");
1421 tx_bus_master_complete_handler (dev);
1422 }
1423 if (int_source & RX_DATA_AV) {
1424 ++irq_ok;
1425 PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted");
1426 rx_data_av_handler (dev);
1427 }
1428 }
1429 if (irq_ok) {
1430 PRINTD (DBG_IRQ, "work done: %u", irq_ok);
1431 } else {
1432 PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source);
1433 }
1434
1435 PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id);
1436 if (irq_ok)
1437 return IRQ_HANDLED;
1438 return IRQ_NONE;
1439}
1440
1441/********** housekeeping **********/
1442
1443static void do_housekeeping (unsigned long arg) {
1444 // just stats at the moment
1445 hrz_dev * dev = (hrz_dev *) arg;
1446
1447 // collect device-specific (not driver/atm-linux) stats here
1448 dev->tx_cell_count += rd_regw (dev, TX_CELL_COUNT_OFF);
1449 dev->rx_cell_count += rd_regw (dev, RX_CELL_COUNT_OFF);
1450 dev->hec_error_count += rd_regw (dev, HEC_ERROR_COUNT_OFF);
1451 dev->unassigned_cell_count += rd_regw (dev, UNASSIGNED_CELL_COUNT_OFF);
1452
1453 mod_timer (&dev->housekeeping, jiffies + HZ/10);
1454
1455 return;
1456}
1457
1458/********** find an idle channel for TX and set it up **********/
1459
1460// called with tx_busy set
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001461static short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001462 unsigned short idle_channels;
1463 short tx_channel = -1;
1464 unsigned int spin_count;
1465 PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev);
1466
1467 // better would be to fail immediately, the caller can then decide whether
1468 // to wait or drop (depending on whether this is UBR etc.)
1469 spin_count = 0;
1470 while (!(idle_channels = rd_regw (dev, TX_STATUS_OFF) & IDLE_CHANNELS_MASK)) {
1471 PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel");
1472 // delay a bit here
1473 if (++spin_count > 100) {
1474 PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel");
1475 return -EBUSY;
1476 }
1477 }
1478
1479 // got an idle channel
1480 {
1481 // tx_idle ensures we look for idle channels in RR order
1482 int chan = dev->tx_idle;
1483
1484 int keep_going = 1;
1485 while (keep_going) {
1486 if (idle_channels & (1<<chan)) {
1487 tx_channel = chan;
1488 keep_going = 0;
1489 }
1490 ++chan;
1491 if (chan == TX_CHANS)
1492 chan = 0;
1493 }
1494
1495 dev->tx_idle = chan;
1496 }
1497
1498 // set up the channel we found
1499 {
1500 // Initialise the cell header in the transmit channel descriptor
1501 // a.k.a. prepare the channel and remember that we have done so.
1502
1503 tx_ch_desc * tx_desc = &memmap->tx_descs[tx_channel];
Dave Jonesb9255562005-11-10 12:55:52 -08001504 u32 rd_ptr;
1505 u32 wr_ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001506 u16 channel = vcc->channel;
1507
1508 unsigned long flags;
1509 spin_lock_irqsave (&dev->mem_lock, flags);
1510
1511 // Update the transmit channel record.
1512 dev->tx_channel_record[tx_channel] = channel;
1513
1514 // xBR channel
1515 update_tx_channel_config (dev, tx_channel, RATE_TYPE_ACCESS,
1516 vcc->tx_xbr_bits);
1517
1518 // Update the PCR counter preload value etc.
1519 update_tx_channel_config (dev, tx_channel, PCR_TIMER_ACCESS,
1520 vcc->tx_pcr_bits);
1521
1522#if 0
1523 if (vcc->tx_xbr_bits == VBR_RATE_TYPE) {
1524 // SCR timer
1525 update_tx_channel_config (dev, tx_channel, SCR_TIMER_ACCESS,
1526 vcc->tx_scr_bits);
1527
1528 // Bucket size...
1529 update_tx_channel_config (dev, tx_channel, BUCKET_CAPACITY_ACCESS,
1530 vcc->tx_bucket_bits);
1531
1532 // ... and fullness
1533 update_tx_channel_config (dev, tx_channel, BUCKET_FULLNESS_ACCESS,
1534 vcc->tx_bucket_bits);
1535 }
1536#endif
1537
1538 // Initialise the read and write buffer pointers
1539 rd_ptr = rd_mem (dev, &tx_desc->rd_buf_type) & BUFFER_PTR_MASK;
1540 wr_ptr = rd_mem (dev, &tx_desc->wr_buf_type) & BUFFER_PTR_MASK;
1541
1542 // idle TX channels should have identical pointers
1543 if (rd_ptr != wr_ptr) {
1544 PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!");
1545 // spin_unlock... return -E...
1546 // I wonder if gcc would get rid of one of the pointer aliases
1547 }
1548 PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.",
1549 rd_ptr, wr_ptr);
1550
1551 switch (vcc->aal) {
1552 case aal0:
1553 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0");
1554 rd_ptr |= CHANNEL_TYPE_RAW_CELLS;
1555 wr_ptr |= CHANNEL_TYPE_RAW_CELLS;
1556 break;
1557 case aal34:
1558 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34");
1559 rd_ptr |= CHANNEL_TYPE_AAL3_4;
1560 wr_ptr |= CHANNEL_TYPE_AAL3_4;
1561 break;
1562 case aal5:
1563 rd_ptr |= CHANNEL_TYPE_AAL5;
1564 wr_ptr |= CHANNEL_TYPE_AAL5;
1565 // Initialise the CRC
1566 wr_mem (dev, &tx_desc->partial_crc, INITIAL_CRC);
1567 break;
1568 }
1569
1570 wr_mem (dev, &tx_desc->rd_buf_type, rd_ptr);
1571 wr_mem (dev, &tx_desc->wr_buf_type, wr_ptr);
1572
1573 // Write the Cell Header
1574 // Payload Type, CLP and GFC would go here if non-zero
1575 wr_mem (dev, &tx_desc->cell_header, channel);
1576
1577 spin_unlock_irqrestore (&dev->mem_lock, flags);
1578 }
1579
1580 return tx_channel;
1581}
1582
1583/********** send a frame **********/
1584
1585static int hrz_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
1586 unsigned int spin_count;
1587 int free_buffers;
1588 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
1589 hrz_vcc * vcc = HRZ_VCC(atm_vcc);
1590 u16 channel = vcc->channel;
1591
1592 u32 buffers_required;
1593
1594 /* signed for error return */
1595 short tx_channel;
1596
1597 PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u",
1598 channel, skb->data, skb->len);
1599
1600 dump_skb (">>>", channel, skb);
1601
1602 if (atm_vcc->qos.txtp.traffic_class == ATM_NONE) {
1603 PRINTK (KERN_ERR, "attempt to send on RX-only VC %x", channel);
1604 hrz_kfree_skb (skb);
1605 return -EIO;
1606 }
1607
1608 // don't understand this
1609 ATM_SKB(skb)->vcc = atm_vcc;
1610
1611 if (skb->len > atm_vcc->qos.txtp.max_sdu) {
1612 PRINTK (KERN_ERR, "sk_buff length greater than agreed max_sdu, dropping...");
1613 hrz_kfree_skb (skb);
1614 return -EIO;
1615 }
1616
1617 if (!channel) {
1618 PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel");
1619 hrz_kfree_skb (skb);
1620 return -EIO;
1621 }
1622
1623#if 0
1624 {
1625 // where would be a better place for this? housekeeping?
1626 u16 status;
1627 pci_read_config_word (dev->pci_dev, PCI_STATUS, &status);
1628 if (status & PCI_STATUS_REC_MASTER_ABORT) {
1629 PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");
1630 status &= ~PCI_STATUS_REC_MASTER_ABORT;
1631 pci_write_config_word (dev->pci_dev, PCI_STATUS, status);
1632 if (test_bit (tx_busy, &dev->flags)) {
1633 hrz_kfree_skb (dev->tx_skb);
1634 tx_release (dev);
1635 }
1636 }
1637 }
1638#endif
1639
1640#ifdef DEBUG_HORIZON
1641 /* wey-hey! */
1642 if (channel == 1023) {
1643 unsigned int i;
1644 unsigned short d = 0;
1645 char * s = skb->data;
1646 if (*s++ == 'D') {
1647 for (i = 0; i < 4; ++i) {
1648 d = (d<<4) | ((*s <= '9') ? (*s - '0') : (*s - 'a' + 10));
1649 ++s;
1650 }
1651 PRINTK (KERN_INFO, "debug bitmap is now %hx", debug = d);
1652 }
1653 }
1654#endif
1655
1656 // wait until TX is free and grab lock
1657 if (tx_hold (dev)) {
1658 hrz_kfree_skb (skb);
1659 return -ERESTARTSYS;
1660 }
1661
1662 // Wait for enough space to be available in transmit buffer memory.
1663
1664 // should be number of cells needed + 2 (according to hardware docs)
1665 // = ((framelen+8)+47) / 48 + 2
1666 // = (framelen+7) / 48 + 3, hmm... faster to put addition inside XXX
1667 buffers_required = (skb->len+(ATM_AAL5_TRAILER-1)) / ATM_CELL_PAYLOAD + 3;
1668
1669 // replace with timer and sleep, add dev->tx_buffers_queue (max 1 entry)
1670 spin_count = 0;
1671 while ((free_buffers = rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF)) < buffers_required) {
1672 PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d",
1673 free_buffers, buffers_required);
1674 // what is the appropriate delay? implement a timeout? (depending on line speed?)
1675 // mdelay (1);
1676 // what happens if we kill (current_pid, SIGKILL) ?
1677 schedule();
1678 if (++spin_count > 1000) {
1679 PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d",
1680 free_buffers, buffers_required);
1681 tx_release (dev);
1682 hrz_kfree_skb (skb);
1683 return -ERESTARTSYS;
1684 }
1685 }
1686
1687 // Select a channel to transmit the frame on.
1688 if (channel == dev->last_vc) {
1689 PRINTD (DBG_TX, "last vc hack: hit");
1690 tx_channel = dev->tx_last;
1691 } else {
1692 PRINTD (DBG_TX, "last vc hack: miss");
1693 // Are we currently transmitting this VC on one of the channels?
1694 for (tx_channel = 0; tx_channel < TX_CHANS; ++tx_channel)
1695 if (dev->tx_channel_record[tx_channel] == channel) {
1696 PRINTD (DBG_TX, "vc already on channel: hit");
1697 break;
1698 }
1699 if (tx_channel == TX_CHANS) {
1700 PRINTD (DBG_TX, "vc already on channel: miss");
1701 // Find and set up an idle channel.
1702 tx_channel = setup_idle_tx_channel (dev, vcc);
1703 if (tx_channel < 0) {
1704 PRINTD (DBG_TX|DBG_ERR, "failed to get channel");
1705 tx_release (dev);
1706 return tx_channel;
1707 }
1708 }
1709
1710 PRINTD (DBG_TX, "got channel");
1711 SELECT_TX_CHANNEL(dev, tx_channel);
1712
1713 dev->last_vc = channel;
1714 dev->tx_last = tx_channel;
1715 }
1716
1717 PRINTD (DBG_TX, "using channel %u", tx_channel);
1718
1719 YELLOW_LED_OFF(dev);
1720
1721 // TX start transfer
1722
1723 {
1724 unsigned int tx_len = skb->len;
1725 unsigned int tx_iovcnt = skb_shinfo(skb)->nr_frags;
1726 // remember this so we can free it later
1727 dev->tx_skb = skb;
1728
1729 if (tx_iovcnt) {
1730 // scatter gather transfer
1731 dev->tx_regions = tx_iovcnt;
1732 dev->tx_iovec = NULL; /* @@@ needs rewritten */
1733 dev->tx_bytes = 0;
1734 PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)",
1735 skb->data, tx_len);
1736 tx_release (dev);
1737 hrz_kfree_skb (skb);
1738 return -EIO;
1739 } else {
1740 // simple transfer
1741 dev->tx_regions = 0;
1742 dev->tx_iovec = NULL;
1743 dev->tx_bytes = tx_len;
1744 dev->tx_addr = skb->data;
1745 PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)",
1746 skb->data, tx_len);
1747 }
1748
1749 // and do the business
1750 tx_schedule (dev, 0);
1751
1752 }
1753
1754 return 0;
1755}
1756
1757/********** reset a card **********/
1758
1759static void hrz_reset (const hrz_dev * dev) {
1760 u32 control_0_reg = rd_regl (dev, CONTROL_0_REG);
1761
1762 // why not set RESET_HORIZON to one and wait for the card to
1763 // reassert that bit as zero? Like so:
1764 control_0_reg = control_0_reg & RESET_HORIZON;
1765 wr_regl (dev, CONTROL_0_REG, control_0_reg);
1766 while (control_0_reg & RESET_HORIZON)
1767 control_0_reg = rd_regl (dev, CONTROL_0_REG);
1768
1769 // old reset code retained:
1770 wr_regl (dev, CONTROL_0_REG, control_0_reg |
1771 RESET_ATM | RESET_RX | RESET_TX | RESET_HOST);
1772 // just guessing here
1773 udelay (1000);
1774
1775 wr_regl (dev, CONTROL_0_REG, control_0_reg);
1776}
1777
1778/********** read the burnt in address **********/
1779
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001780static void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001781{
1782 wr_regl (dev, CONTROL_0_REG, ctrl);
1783 udelay (5);
1784}
1785
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001786static void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001787{
1788 // DI must be valid around rising SK edge
1789 WRITE_IT_WAIT(dev, ctrl & ~SEEPROM_SK);
1790 WRITE_IT_WAIT(dev, ctrl | SEEPROM_SK);
1791}
1792
David S. Miller977a4152006-10-24 16:16:39 -07001793static u16 __devinit read_bia (const hrz_dev * dev, u16 addr)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001794{
1795 u32 ctrl = rd_regl (dev, CONTROL_0_REG);
1796
1797 const unsigned int addr_bits = 6;
1798 const unsigned int data_bits = 16;
1799
1800 unsigned int i;
1801
1802 u16 res;
1803
1804 ctrl &= ~(SEEPROM_CS | SEEPROM_SK | SEEPROM_DI);
1805 WRITE_IT_WAIT(dev, ctrl);
1806
1807 // wake Serial EEPROM and send 110 (READ) command
1808 ctrl |= (SEEPROM_CS | SEEPROM_DI);
1809 CLOCK_IT(dev, ctrl);
1810
1811 ctrl |= SEEPROM_DI;
1812 CLOCK_IT(dev, ctrl);
1813
1814 ctrl &= ~SEEPROM_DI;
1815 CLOCK_IT(dev, ctrl);
1816
1817 for (i=0; i<addr_bits; i++) {
1818 if (addr & (1 << (addr_bits-1)))
1819 ctrl |= SEEPROM_DI;
1820 else
1821 ctrl &= ~SEEPROM_DI;
1822
1823 CLOCK_IT(dev, ctrl);
1824
1825 addr = addr << 1;
1826 }
1827
1828 // we could check that we have DO = 0 here
1829 ctrl &= ~SEEPROM_DI;
1830
1831 res = 0;
1832 for (i=0;i<data_bits;i++) {
1833 res = res >> 1;
1834
1835 CLOCK_IT(dev, ctrl);
1836
1837 if (rd_regl (dev, CONTROL_0_REG) & SEEPROM_DO)
1838 res |= (1 << (data_bits-1));
1839 }
1840
1841 ctrl &= ~(SEEPROM_SK | SEEPROM_CS);
1842 WRITE_IT_WAIT(dev, ctrl);
1843
1844 return res;
1845}
1846
1847/********** initialise a card **********/
1848
Al Viro0a3c4bd2007-01-23 12:25:08 +00001849static int __devinit hrz_init (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001850 int onefivefive;
1851
1852 u16 chan;
1853
1854 int buff_count;
1855
1856 HDW * mem;
1857
1858 cell_buf * tx_desc;
1859 cell_buf * rx_desc;
1860
1861 u32 ctrl;
1862
1863 ctrl = rd_regl (dev, CONTROL_0_REG);
1864 PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl);
1865 onefivefive = ctrl & ATM_LAYER_STATUS;
1866
1867 if (onefivefive)
1868 printk (DEV_LABEL ": Horizon Ultra (at 155.52 MBps)");
1869 else
1870 printk (DEV_LABEL ": Horizon (at 25 MBps)");
1871
1872 printk (":");
1873 // Reset the card to get everything in a known state
1874
1875 printk (" reset");
1876 hrz_reset (dev);
1877
1878 // Clear all the buffer memory
1879
1880 printk (" clearing memory");
1881
1882 for (mem = (HDW *) memmap; mem < (HDW *) (memmap + 1); ++mem)
1883 wr_mem (dev, mem, 0);
1884
1885 printk (" tx channels");
1886
1887 // All transmit eight channels are set up as AAL5 ABR channels with
1888 // a 16us cell spacing. Why?
1889
1890 // Channel 0 gets the free buffer at 100h, channel 1 gets the free
1891 // buffer at 110h etc.
1892
1893 for (chan = 0; chan < TX_CHANS; ++chan) {
1894 tx_ch_desc * tx_desc = &memmap->tx_descs[chan];
1895 cell_buf * buf = &memmap->inittxbufs[chan];
1896
1897 // initialise the read and write buffer pointers
1898 wr_mem (dev, &tx_desc->rd_buf_type, BUF_PTR(buf));
1899 wr_mem (dev, &tx_desc->wr_buf_type, BUF_PTR(buf));
1900
1901 // set the status of the initial buffers to empty
1902 wr_mem (dev, &buf->next, BUFF_STATUS_EMPTY);
1903 }
1904
1905 // Use space bufn3 at the moment for tx buffers
1906
1907 printk (" tx buffers");
1908
1909 tx_desc = memmap->bufn3;
1910
1911 wr_mem (dev, &memmap->txfreebufstart.next, BUF_PTR(tx_desc) | BUFF_STATUS_EMPTY);
1912
1913 for (buff_count = 0; buff_count < BUFN3_SIZE-1; buff_count++) {
1914 wr_mem (dev, &tx_desc->next, BUF_PTR(tx_desc+1) | BUFF_STATUS_EMPTY);
1915 tx_desc++;
1916 }
1917
1918 wr_mem (dev, &tx_desc->next, BUF_PTR(&memmap->txfreebufend) | BUFF_STATUS_EMPTY);
1919
1920 // Initialise the transmit free buffer count
1921 wr_regw (dev, TX_FREE_BUFFER_COUNT_OFF, BUFN3_SIZE);
1922
1923 printk (" rx channels");
1924
1925 // Initialise all of the receive channels to be AAL5 disabled with
1926 // an interrupt threshold of 0
1927
1928 for (chan = 0; chan < RX_CHANS; ++chan) {
1929 rx_ch_desc * rx_desc = &memmap->rx_descs[chan];
1930
1931 wr_mem (dev, &rx_desc->wr_buf_type, CHANNEL_TYPE_AAL5 | RX_CHANNEL_DISABLED);
1932 }
1933
1934 printk (" rx buffers");
1935
1936 // Use space bufn4 at the moment for rx buffers
1937
1938 rx_desc = memmap->bufn4;
1939
1940 wr_mem (dev, &memmap->rxfreebufstart.next, BUF_PTR(rx_desc) | BUFF_STATUS_EMPTY);
1941
1942 for (buff_count = 0; buff_count < BUFN4_SIZE-1; buff_count++) {
1943 wr_mem (dev, &rx_desc->next, BUF_PTR(rx_desc+1) | BUFF_STATUS_EMPTY);
1944
1945 rx_desc++;
1946 }
1947
1948 wr_mem (dev, &rx_desc->next, BUF_PTR(&memmap->rxfreebufend) | BUFF_STATUS_EMPTY);
1949
1950 // Initialise the receive free buffer count
1951 wr_regw (dev, RX_FREE_BUFFER_COUNT_OFF, BUFN4_SIZE);
1952
1953 // Initialize Horizons registers
1954
1955 // TX config
1956 wr_regw (dev, TX_CONFIG_OFF,
1957 ABR_ROUND_ROBIN | TX_NORMAL_OPERATION | DRVR_DRVRBAR_ENABLE);
1958
1959 // RX config. Use 10-x VC bits, x VP bits, non user cells in channel 0.
1960 wr_regw (dev, RX_CONFIG_OFF,
1961 DISCARD_UNUSED_VPI_VCI_BITS_SET | NON_USER_CELLS_IN_ONE_CHANNEL | vpi_bits);
1962
1963 // RX line config
1964 wr_regw (dev, RX_LINE_CONFIG_OFF,
1965 LOCK_DETECT_ENABLE | FREQUENCY_DETECT_ENABLE | GXTALOUT_SELECT_DIV4);
1966
1967 // Set the max AAL5 cell count to be just enough to contain the
1968 // largest AAL5 frame that the user wants to receive
1969 wr_regw (dev, MAX_AAL5_CELL_COUNT_OFF,
1970 (max_rx_size + ATM_AAL5_TRAILER + ATM_CELL_PAYLOAD - 1) / ATM_CELL_PAYLOAD);
1971
1972 // Enable receive
1973 wr_regw (dev, RX_CONFIG_OFF, rd_regw (dev, RX_CONFIG_OFF) | RX_ENABLE);
1974
1975 printk (" control");
1976
1977 // Drive the OE of the LEDs then turn the green LED on
1978 ctrl |= GREEN_LED_OE | YELLOW_LED_OE | GREEN_LED | YELLOW_LED;
1979 wr_regl (dev, CONTROL_0_REG, ctrl);
1980
1981 // Test for a 155-capable card
1982
1983 if (onefivefive) {
1984 // Select 155 mode... make this a choice (or: how do we detect
1985 // external line speed and switch?)
1986 ctrl |= ATM_LAYER_SELECT;
1987 wr_regl (dev, CONTROL_0_REG, ctrl);
1988
1989 // test SUNI-lite vs SAMBA
1990
1991 // Register 0x00 in the SUNI will have some of bits 3-7 set, and
1992 // they will always be zero for the SAMBA. Ha! Bloody hardware
1993 // engineers. It'll never work.
1994
1995 if (rd_framer (dev, 0) & 0x00f0) {
1996 // SUNI
1997 printk (" SUNI");
1998
1999 // Reset, just in case
2000 wr_framer (dev, 0x00, 0x0080);
2001 wr_framer (dev, 0x00, 0x0000);
2002
2003 // Configure transmit FIFO
2004 wr_framer (dev, 0x63, rd_framer (dev, 0x63) | 0x0002);
2005
2006 // Set line timed mode
2007 wr_framer (dev, 0x05, rd_framer (dev, 0x05) | 0x0001);
2008 } else {
2009 // SAMBA
2010 printk (" SAMBA");
2011
2012 // Reset, just in case
2013 wr_framer (dev, 0, rd_framer (dev, 0) | 0x0001);
2014 wr_framer (dev, 0, rd_framer (dev, 0) &~ 0x0001);
2015
2016 // Turn off diagnostic loopback and enable line-timed mode
2017 wr_framer (dev, 0, 0x0002);
2018
2019 // Turn on transmit outputs
2020 wr_framer (dev, 2, 0x0B80);
2021 }
2022 } else {
2023 // Select 25 mode
2024 ctrl &= ~ATM_LAYER_SELECT;
2025
2026 // Madge B154 setup
2027 // none required?
2028 }
2029
2030 printk (" LEDs");
2031
2032 GREEN_LED_ON(dev);
2033 YELLOW_LED_ON(dev);
2034
2035 printk (" ESI=");
2036
2037 {
2038 u16 b = 0;
2039 int i;
2040 u8 * esi = dev->atm_dev->esi;
2041
2042 // in the card I have, EEPROM
2043 // addresses 0, 1, 2 contain 0
2044 // addresess 5, 6 etc. contain ffff
2045 // NB: Madge prefix is 00 00 f6 (which is 00 00 6f in Ethernet bit order)
2046 // the read_bia routine gets the BIA in Ethernet bit order
2047
2048 for (i=0; i < ESI_LEN; ++i) {
2049 if (i % 2 == 0)
2050 b = read_bia (dev, i/2 + 2);
2051 else
2052 b = b >> 8;
2053 esi[i] = b & 0xFF;
2054 printk ("%02x", esi[i]);
2055 }
2056 }
2057
2058 // Enable RX_Q and ?X_COMPLETE interrupts only
2059 wr_regl (dev, INT_ENABLE_REG_OFF, INTERESTING_INTERRUPTS);
2060 printk (" IRQ on");
2061
2062 printk (".\n");
2063
2064 return onefivefive;
2065}
2066
2067/********** check max_sdu **********/
2068
2069static int check_max_sdu (hrz_aal aal, struct atm_trafprm * tp, unsigned int max_frame_size) {
2070 PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu");
2071
2072 switch (aal) {
2073 case aal0:
2074 if (!(tp->max_sdu)) {
2075 PRINTD (DBG_QOS, "defaulting max_sdu");
2076 tp->max_sdu = ATM_AAL0_SDU;
2077 } else if (tp->max_sdu != ATM_AAL0_SDU) {
2078 PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");
2079 return -EINVAL;
2080 }
2081 break;
2082 case aal34:
2083 if (tp->max_sdu == 0 || tp->max_sdu > ATM_MAX_AAL34_PDU) {
2084 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");
2085 tp->max_sdu = ATM_MAX_AAL34_PDU;
2086 }
2087 break;
2088 case aal5:
2089 if (tp->max_sdu == 0 || tp->max_sdu > max_frame_size) {
2090 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");
2091 tp->max_sdu = max_frame_size;
2092 }
2093 break;
2094 }
2095 return 0;
2096}
2097
2098/********** check pcr **********/
2099
2100// something like this should be part of ATM Linux
2101static int atm_pcr_check (struct atm_trafprm * tp, unsigned int pcr) {
2102 // we are assuming non-UBR, and non-special values of pcr
2103 if (tp->min_pcr == ATM_MAX_PCR)
2104 PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR");
2105 else if (tp->min_pcr < 0)
2106 PRINTD (DBG_QOS, "luser gave negative min_pcr");
2107 else if (tp->min_pcr && tp->min_pcr > pcr)
2108 PRINTD (DBG_QOS, "pcr less than min_pcr");
2109 else
2110 // !! max_pcr = UNSPEC (0) is equivalent to max_pcr = MAX (-1)
2111 // easier to #define ATM_MAX_PCR 0 and have all rates unsigned?
2112 // [this would get rid of next two conditionals]
2113 if ((0) && tp->max_pcr == ATM_MAX_PCR)
2114 PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR");
2115 else if ((tp->max_pcr != ATM_MAX_PCR) && tp->max_pcr < 0)
2116 PRINTD (DBG_QOS, "luser gave negative max_pcr");
2117 else if (tp->max_pcr && tp->max_pcr != ATM_MAX_PCR && tp->max_pcr < pcr)
2118 PRINTD (DBG_QOS, "pcr greater than max_pcr");
2119 else {
2120 // each limit unspecified or not violated
2121 PRINTD (DBG_QOS, "xBR(pcr) OK");
2122 return 0;
2123 }
2124 PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d",
2125 pcr, tp->min_pcr, tp->pcr, tp->max_pcr);
2126 return -EINVAL;
2127}
2128
2129/********** open VC **********/
2130
2131static int hrz_open (struct atm_vcc *atm_vcc)
2132{
2133 int error;
2134 u16 channel;
2135
2136 struct atm_qos * qos;
2137 struct atm_trafprm * txtp;
2138 struct atm_trafprm * rxtp;
2139
2140 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2141 hrz_vcc vcc;
2142 hrz_vcc * vccp; // allocated late
2143 short vpi = atm_vcc->vpi;
2144 int vci = atm_vcc->vci;
2145 PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci);
2146
2147#ifdef ATM_VPI_UNSPEC
2148 // UNSPEC is deprecated, remove this code eventually
2149 if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC) {
2150 PRINTK (KERN_WARNING, "rejecting open with unspecified VPI/VCI (deprecated)");
2151 return -EINVAL;
2152 }
2153#endif
2154
2155 error = vpivci_to_channel (&channel, vpi, vci);
2156 if (error) {
2157 PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci);
2158 return error;
2159 }
2160
2161 vcc.channel = channel;
2162 // max speed for the moment
2163 vcc.tx_rate = 0x0;
2164
2165 qos = &atm_vcc->qos;
2166
2167 // check AAL and remember it
2168 switch (qos->aal) {
2169 case ATM_AAL0:
2170 // we would if it were 48 bytes and not 52!
2171 PRINTD (DBG_QOS|DBG_VCC, "AAL0");
2172 vcc.aal = aal0;
2173 break;
2174 case ATM_AAL34:
2175 // we would if I knew how do the SAR!
2176 PRINTD (DBG_QOS|DBG_VCC, "AAL3/4");
2177 vcc.aal = aal34;
2178 break;
2179 case ATM_AAL5:
2180 PRINTD (DBG_QOS|DBG_VCC, "AAL5");
2181 vcc.aal = aal5;
2182 break;
2183 default:
2184 PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!");
2185 return -EINVAL;
2186 break;
2187 }
2188
2189 // TX traffic parameters
2190
2191 // there are two, interrelated problems here: 1. the reservation of
2192 // PCR is not a binary choice, we are given bounds and/or a
2193 // desirable value; 2. the device is only capable of certain values,
2194 // most of which are not integers. It is almost certainly acceptable
2195 // to be off by a maximum of 1 to 10 cps.
2196
2197 // Pragmatic choice: always store an integral PCR as that which has
2198 // been allocated, even if we allocate a little (or a lot) less,
2199 // after rounding. The actual allocation depends on what we can
2200 // manage with our rate selection algorithm. The rate selection
2201 // algorithm is given an integral PCR and a tolerance and told
2202 // whether it should round the value up or down if the tolerance is
2203 // exceeded; it returns: a) the actual rate selected (rounded up to
2204 // the nearest integer), b) a bit pattern to feed to the timer
2205 // register, and c) a failure value if no applicable rate exists.
2206
2207 // Part of the job is done by atm_pcr_goal which gives us a PCR
2208 // specification which says: EITHER grab the maximum available PCR
2209 // (and perhaps a lower bound which we musn't pass), OR grab this
2210 // amount, rounding down if you have to (and perhaps a lower bound
2211 // which we musn't pass) OR grab this amount, rounding up if you
2212 // have to (and perhaps an upper bound which we musn't pass). If any
2213 // bounds ARE passed we fail. Note that rounding is only rounding to
2214 // match device limitations, we do not round down to satisfy
2215 // bandwidth availability even if this would not violate any given
2216 // lower bound.
2217
2218 // Note: telephony = 64kb/s = 48 byte cell payload @ 500/3 cells/s
2219 // (say) so this is not even a binary fixpoint cell rate (but this
2220 // device can do it). To avoid this sort of hassle we use a
2221 // tolerance parameter (currently fixed at 10 cps).
2222
2223 PRINTD (DBG_QOS, "TX:");
2224
2225 txtp = &qos->txtp;
2226
2227 // set up defaults for no traffic
2228 vcc.tx_rate = 0;
2229 // who knows what would actually happen if you try and send on this?
2230 vcc.tx_xbr_bits = IDLE_RATE_TYPE;
2231 vcc.tx_pcr_bits = CLOCK_DISABLE;
2232#if 0
2233 vcc.tx_scr_bits = CLOCK_DISABLE;
2234 vcc.tx_bucket_bits = 0;
2235#endif
2236
2237 if (txtp->traffic_class != ATM_NONE) {
2238 error = check_max_sdu (vcc.aal, txtp, max_tx_size);
2239 if (error) {
2240 PRINTD (DBG_QOS, "TX max_sdu check failed");
2241 return error;
2242 }
2243
2244 switch (txtp->traffic_class) {
2245 case ATM_UBR: {
2246 // we take "the PCR" as a rate-cap
2247 // not reserved
2248 vcc.tx_rate = 0;
2249 make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, NULL);
2250 vcc.tx_xbr_bits = ABR_RATE_TYPE;
2251 break;
2252 }
2253#if 0
2254 case ATM_ABR: {
2255 // reserve min, allow up to max
2256 vcc.tx_rate = 0; // ?
2257 make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, 0);
2258 vcc.tx_xbr_bits = ABR_RATE_TYPE;
2259 break;
2260 }
2261#endif
2262 case ATM_CBR: {
2263 int pcr = atm_pcr_goal (txtp);
2264 rounding r;
2265 if (!pcr) {
2266 // down vs. up, remaining bandwidth vs. unlimited bandwidth!!
2267 // should really have: once someone gets unlimited bandwidth
2268 // that no more non-UBR channels can be opened until the
2269 // unlimited one closes?? For the moment, round_down means
2270 // greedy people actually get something and not nothing
2271 r = round_down;
2272 // slight race (no locking) here so we may get -EAGAIN
2273 // later; the greedy bastards would deserve it :)
2274 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");
2275 pcr = dev->tx_avail;
2276 } else if (pcr < 0) {
2277 r = round_down;
2278 pcr = -pcr;
2279 } else {
2280 r = round_up;
2281 }
2282 error = make_rate_with_tolerance (dev, pcr, r, 10,
2283 &vcc.tx_pcr_bits, &vcc.tx_rate);
2284 if (error) {
2285 PRINTD (DBG_QOS, "could not make rate from TX PCR");
2286 return error;
2287 }
2288 // not really clear what further checking is needed
2289 error = atm_pcr_check (txtp, vcc.tx_rate);
2290 if (error) {
2291 PRINTD (DBG_QOS, "TX PCR failed consistency check");
2292 return error;
2293 }
2294 vcc.tx_xbr_bits = CBR_RATE_TYPE;
2295 break;
2296 }
2297#if 0
2298 case ATM_VBR: {
2299 int pcr = atm_pcr_goal (txtp);
2300 // int scr = atm_scr_goal (txtp);
2301 int scr = pcr/2; // just for fun
2302 unsigned int mbs = 60; // just for fun
2303 rounding pr;
2304 rounding sr;
2305 unsigned int bucket;
2306 if (!pcr) {
2307 pr = round_nearest;
2308 pcr = 1<<30;
2309 } else if (pcr < 0) {
2310 pr = round_down;
2311 pcr = -pcr;
2312 } else {
2313 pr = round_up;
2314 }
2315 error = make_rate_with_tolerance (dev, pcr, pr, 10,
2316 &vcc.tx_pcr_bits, 0);
2317 if (!scr) {
2318 // see comments for PCR with CBR above
2319 sr = round_down;
2320 // slight race (no locking) here so we may get -EAGAIN
2321 // later; the greedy bastards would deserve it :)
2322 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");
2323 scr = dev->tx_avail;
2324 } else if (scr < 0) {
2325 sr = round_down;
2326 scr = -scr;
2327 } else {
2328 sr = round_up;
2329 }
2330 error = make_rate_with_tolerance (dev, scr, sr, 10,
2331 &vcc.tx_scr_bits, &vcc.tx_rate);
2332 if (error) {
2333 PRINTD (DBG_QOS, "could not make rate from TX SCR");
2334 return error;
2335 }
2336 // not really clear what further checking is needed
2337 // error = atm_scr_check (txtp, vcc.tx_rate);
2338 if (error) {
2339 PRINTD (DBG_QOS, "TX SCR failed consistency check");
2340 return error;
2341 }
2342 // bucket calculations (from a piece of paper...) cell bucket
2343 // capacity must be largest integer smaller than m(p-s)/p + 1
2344 // where m = max burst size, p = pcr, s = scr
2345 bucket = mbs*(pcr-scr)/pcr;
2346 if (bucket*pcr != mbs*(pcr-scr))
2347 bucket += 1;
2348 if (bucket > BUCKET_MAX_SIZE) {
2349 PRINTD (DBG_QOS, "shrinking bucket from %u to %u",
2350 bucket, BUCKET_MAX_SIZE);
2351 bucket = BUCKET_MAX_SIZE;
2352 }
2353 vcc.tx_xbr_bits = VBR_RATE_TYPE;
2354 vcc.tx_bucket_bits = bucket;
2355 break;
2356 }
2357#endif
2358 default: {
2359 PRINTD (DBG_QOS, "unsupported TX traffic class");
2360 return -EINVAL;
2361 break;
2362 }
2363 }
2364 }
2365
2366 // RX traffic parameters
2367
2368 PRINTD (DBG_QOS, "RX:");
2369
2370 rxtp = &qos->rxtp;
2371
2372 // set up defaults for no traffic
2373 vcc.rx_rate = 0;
2374
2375 if (rxtp->traffic_class != ATM_NONE) {
2376 error = check_max_sdu (vcc.aal, rxtp, max_rx_size);
2377 if (error) {
2378 PRINTD (DBG_QOS, "RX max_sdu check failed");
2379 return error;
2380 }
2381 switch (rxtp->traffic_class) {
2382 case ATM_UBR: {
2383 // not reserved
2384 break;
2385 }
2386#if 0
2387 case ATM_ABR: {
2388 // reserve min
2389 vcc.rx_rate = 0; // ?
2390 break;
2391 }
2392#endif
2393 case ATM_CBR: {
2394 int pcr = atm_pcr_goal (rxtp);
2395 if (!pcr) {
2396 // slight race (no locking) here so we may get -EAGAIN
2397 // later; the greedy bastards would deserve it :)
2398 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");
2399 pcr = dev->rx_avail;
2400 } else if (pcr < 0) {
2401 pcr = -pcr;
2402 }
2403 vcc.rx_rate = pcr;
2404 // not really clear what further checking is needed
2405 error = atm_pcr_check (rxtp, vcc.rx_rate);
2406 if (error) {
2407 PRINTD (DBG_QOS, "RX PCR failed consistency check");
2408 return error;
2409 }
2410 break;
2411 }
2412#if 0
2413 case ATM_VBR: {
2414 // int scr = atm_scr_goal (rxtp);
2415 int scr = 1<<16; // just for fun
2416 if (!scr) {
2417 // slight race (no locking) here so we may get -EAGAIN
2418 // later; the greedy bastards would deserve it :)
2419 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");
2420 scr = dev->rx_avail;
2421 } else if (scr < 0) {
2422 scr = -scr;
2423 }
2424 vcc.rx_rate = scr;
2425 // not really clear what further checking is needed
2426 // error = atm_scr_check (rxtp, vcc.rx_rate);
2427 if (error) {
2428 PRINTD (DBG_QOS, "RX SCR failed consistency check");
2429 return error;
2430 }
2431 break;
2432 }
2433#endif
2434 default: {
2435 PRINTD (DBG_QOS, "unsupported RX traffic class");
2436 return -EINVAL;
2437 break;
2438 }
2439 }
2440 }
2441
2442
2443 // late abort useful for diagnostics
2444 if (vcc.aal != aal5) {
2445 PRINTD (DBG_QOS, "AAL not supported");
2446 return -EINVAL;
2447 }
2448
2449 // get space for our vcc stuff and copy parameters into it
2450 vccp = kmalloc (sizeof(hrz_vcc), GFP_KERNEL);
2451 if (!vccp) {
2452 PRINTK (KERN_ERR, "out of memory!");
2453 return -ENOMEM;
2454 }
2455 *vccp = vcc;
2456
2457 // clear error and grab cell rate resource lock
2458 error = 0;
2459 spin_lock (&dev->rate_lock);
2460
2461 if (vcc.tx_rate > dev->tx_avail) {
2462 PRINTD (DBG_QOS, "not enough TX PCR left");
2463 error = -EAGAIN;
2464 }
2465
2466 if (vcc.rx_rate > dev->rx_avail) {
2467 PRINTD (DBG_QOS, "not enough RX PCR left");
2468 error = -EAGAIN;
2469 }
2470
2471 if (!error) {
2472 // really consume cell rates
2473 dev->tx_avail -= vcc.tx_rate;
2474 dev->rx_avail -= vcc.rx_rate;
2475 PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR",
2476 vcc.tx_rate, vcc.rx_rate);
2477 }
2478
2479 // release lock and exit on error
2480 spin_unlock (&dev->rate_lock);
2481 if (error) {
2482 PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources");
2483 kfree (vccp);
2484 return error;
2485 }
2486
2487 // this is "immediately before allocating the connection identifier
2488 // in hardware" - so long as the next call does not fail :)
2489 set_bit(ATM_VF_ADDR,&atm_vcc->flags);
2490
2491 // any errors here are very serious and should never occur
2492
2493 if (rxtp->traffic_class != ATM_NONE) {
2494 if (dev->rxer[channel]) {
2495 PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX");
2496 error = -EBUSY;
2497 }
2498 if (!error)
2499 error = hrz_open_rx (dev, channel);
2500 if (error) {
2501 kfree (vccp);
2502 return error;
2503 }
2504 // this link allows RX frames through
2505 dev->rxer[channel] = atm_vcc;
2506 }
2507
2508 // success, set elements of atm_vcc
2509 atm_vcc->dev_data = (void *) vccp;
2510
2511 // indicate readiness
2512 set_bit(ATM_VF_READY,&atm_vcc->flags);
2513
2514 return 0;
2515}
2516
2517/********** close VC **********/
2518
2519static void hrz_close (struct atm_vcc * atm_vcc) {
2520 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2521 hrz_vcc * vcc = HRZ_VCC(atm_vcc);
2522 u16 channel = vcc->channel;
2523 PRINTD (DBG_VCC|DBG_FLOW, "hrz_close");
2524
2525 // indicate unreadiness
2526 clear_bit(ATM_VF_READY,&atm_vcc->flags);
2527
2528 if (atm_vcc->qos.txtp.traffic_class != ATM_NONE) {
2529 unsigned int i;
2530
2531 // let any TX on this channel that has started complete
2532 // no restart, just keep trying
2533 while (tx_hold (dev))
2534 ;
2535 // remove record of any tx_channel having been setup for this channel
2536 for (i = 0; i < TX_CHANS; ++i)
2537 if (dev->tx_channel_record[i] == channel) {
2538 dev->tx_channel_record[i] = -1;
2539 break;
2540 }
2541 if (dev->last_vc == channel)
2542 dev->tx_last = -1;
2543 tx_release (dev);
2544 }
2545
2546 if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) {
2547 // disable RXing - it tries quite hard
2548 hrz_close_rx (dev, channel);
2549 // forget the vcc - no more skbs will be pushed
2550 if (atm_vcc != dev->rxer[channel])
2551 PRINTK (KERN_ERR, "%s atm_vcc=%p rxer[channel]=%p",
2552 "arghhh! we're going to die!",
2553 atm_vcc, dev->rxer[channel]);
2554 dev->rxer[channel] = NULL;
2555 }
2556
2557 // atomically release our rate reservation
2558 spin_lock (&dev->rate_lock);
2559 PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR",
2560 vcc->tx_rate, vcc->rx_rate);
2561 dev->tx_avail += vcc->tx_rate;
2562 dev->rx_avail += vcc->rx_rate;
2563 spin_unlock (&dev->rate_lock);
2564
2565 // free our structure
2566 kfree (vcc);
2567 // say the VPI/VCI is free again
2568 clear_bit(ATM_VF_ADDR,&atm_vcc->flags);
2569}
2570
2571#if 0
2572static int hrz_getsockopt (struct atm_vcc * atm_vcc, int level, int optname,
2573 void *optval, int optlen) {
2574 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2575 PRINTD (DBG_FLOW|DBG_VCC, "hrz_getsockopt");
2576 switch (level) {
2577 case SOL_SOCKET:
2578 switch (optname) {
2579// case SO_BCTXOPT:
2580// break;
2581// case SO_BCRXOPT:
2582// break;
2583 default:
2584 return -ENOPROTOOPT;
2585 break;
2586 };
2587 break;
2588 }
2589 return -EINVAL;
2590}
2591
2592static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname,
2593 void *optval, int optlen) {
2594 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2595 PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
2596 switch (level) {
2597 case SOL_SOCKET:
2598 switch (optname) {
2599// case SO_BCTXOPT:
2600// break;
2601// case SO_BCRXOPT:
2602// break;
2603 default:
2604 return -ENOPROTOOPT;
2605 break;
2606 };
2607 break;
2608 }
2609 return -EINVAL;
2610}
2611#endif
2612
2613#if 0
2614static int hrz_ioctl (struct atm_dev * atm_dev, unsigned int cmd, void *arg) {
2615 hrz_dev * dev = HRZ_DEV(atm_dev);
2616 PRINTD (DBG_FLOW, "hrz_ioctl");
2617 return -1;
2618}
2619
2620unsigned char hrz_phy_get (struct atm_dev * atm_dev, unsigned long addr) {
2621 hrz_dev * dev = HRZ_DEV(atm_dev);
2622 PRINTD (DBG_FLOW, "hrz_phy_get");
2623 return 0;
2624}
2625
2626static void hrz_phy_put (struct atm_dev * atm_dev, unsigned char value,
2627 unsigned long addr) {
2628 hrz_dev * dev = HRZ_DEV(atm_dev);
2629 PRINTD (DBG_FLOW, "hrz_phy_put");
2630}
2631
2632static int hrz_change_qos (struct atm_vcc * atm_vcc, struct atm_qos *qos, int flgs) {
2633 hrz_dev * dev = HRZ_DEV(vcc->dev);
2634 PRINTD (DBG_FLOW, "hrz_change_qos");
2635 return -1;
2636}
2637#endif
2638
2639/********** proc file contents **********/
2640
2641static int hrz_proc_read (struct atm_dev * atm_dev, loff_t * pos, char * page) {
2642 hrz_dev * dev = HRZ_DEV(atm_dev);
2643 int left = *pos;
2644 PRINTD (DBG_FLOW, "hrz_proc_read");
2645
2646 /* more diagnostics here? */
2647
2648#if 0
2649 if (!left--) {
2650 unsigned int count = sprintf (page, "vbr buckets:");
2651 unsigned int i;
2652 for (i = 0; i < TX_CHANS; ++i)
2653 count += sprintf (page, " %u/%u",
2654 query_tx_channel_config (dev, i, BUCKET_FULLNESS_ACCESS),
2655 query_tx_channel_config (dev, i, BUCKET_CAPACITY_ACCESS));
2656 count += sprintf (page+count, ".\n");
2657 return count;
2658 }
2659#endif
2660
2661 if (!left--)
2662 return sprintf (page,
2663 "cells: TX %lu, RX %lu, HEC errors %lu, unassigned %lu.\n",
2664 dev->tx_cell_count, dev->rx_cell_count,
2665 dev->hec_error_count, dev->unassigned_cell_count);
2666
2667 if (!left--)
2668 return sprintf (page,
2669 "free cell buffers: TX %hu, RX %hu+%hu.\n",
2670 rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF),
2671 rd_regw (dev, RX_FREE_BUFFER_COUNT_OFF),
2672 dev->noof_spare_buffers);
2673
2674 if (!left--)
2675 return sprintf (page,
2676 "cps remaining: TX %u, RX %u\n",
2677 dev->tx_avail, dev->rx_avail);
2678
2679 return 0;
2680}
2681
2682static const struct atmdev_ops hrz_ops = {
2683 .open = hrz_open,
2684 .close = hrz_close,
2685 .send = hrz_send,
2686 .proc_read = hrz_proc_read,
2687 .owner = THIS_MODULE,
2688};
2689
2690static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
2691{
2692 hrz_dev * dev;
2693 int err = 0;
2694
2695 // adapter slot free, read resources from PCI configuration space
2696 u32 iobase = pci_resource_start (pci_dev, 0);
2697 u32 * membase = bus_to_virt (pci_resource_start (pci_dev, 1));
2698 unsigned int irq;
2699 unsigned char lat;
2700
2701 PRINTD (DBG_FLOW, "hrz_probe");
2702
2703 if (pci_enable_device(pci_dev))
2704 return -EINVAL;
2705
2706 /* XXX DEV_LABEL is a guess */
2707 if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) {
2708 return -EINVAL;
2709 goto out_disable;
2710 }
2711
Om Narasimhan0c1cca12006-10-03 16:27:18 -07002712 dev = kzalloc(sizeof(hrz_dev), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002713 if (!dev) {
2714 // perhaps we should be nice: deregister all adapters and abort?
2715 PRINTD(DBG_ERR, "out of memory");
2716 err = -ENOMEM;
2717 goto out_release;
2718 }
2719
Linus Torvalds1da177e2005-04-16 15:20:36 -07002720 pci_set_drvdata(pci_dev, dev);
2721
2722 // grab IRQ and install handler - move this someplace more sensible
2723 irq = pci_dev->irq;
2724 if (request_irq(irq,
2725 interrupt_handler,
Thomas Gleixnerdace1452006-07-01 19:29:38 -07002726 IRQF_SHARED, /* irqflags guess */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002727 DEV_LABEL, /* name guess */
2728 dev)) {
2729 PRINTD(DBG_WARN, "request IRQ failed!");
2730 err = -EINVAL;
2731 goto out_free;
2732 }
2733
2734 PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
2735 iobase, irq, membase);
2736
2737 dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
2738 if (!(dev->atm_dev)) {
2739 PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
2740 err = -EINVAL;
2741 goto out_free_irq;
2742 }
2743
2744 PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p",
2745 dev->atm_dev->number, dev, dev->atm_dev);
2746 dev->atm_dev->dev_data = (void *) dev;
2747 dev->pci_dev = pci_dev;
2748
2749 // enable bus master accesses
2750 pci_set_master(pci_dev);
2751
2752 // frobnicate latency (upwards, usually)
2753 pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &lat);
2754 if (pci_lat) {
2755 PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu",
2756 "changing", lat, pci_lat);
2757 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, pci_lat);
2758 } else if (lat < MIN_PCI_LATENCY) {
2759 PRINTK(KERN_INFO, "%s PCI latency timer from %hu to %hu",
2760 "increasing", lat, MIN_PCI_LATENCY);
2761 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, MIN_PCI_LATENCY);
2762 }
2763
2764 dev->iobase = iobase;
2765 dev->irq = irq;
2766 dev->membase = membase;
2767
2768 dev->rx_q_entry = dev->rx_q_reset = &memmap->rx_q_entries[0];
2769 dev->rx_q_wrap = &memmap->rx_q_entries[RX_CHANS-1];
2770
2771 // these next three are performance hacks
2772 dev->last_vc = -1;
2773 dev->tx_last = -1;
2774 dev->tx_idle = 0;
2775
2776 dev->tx_regions = 0;
2777 dev->tx_bytes = 0;
2778 dev->tx_skb = NULL;
2779 dev->tx_iovec = NULL;
2780
2781 dev->tx_cell_count = 0;
2782 dev->rx_cell_count = 0;
2783 dev->hec_error_count = 0;
2784 dev->unassigned_cell_count = 0;
2785
2786 dev->noof_spare_buffers = 0;
2787
2788 {
2789 unsigned int i;
2790 for (i = 0; i < TX_CHANS; ++i)
2791 dev->tx_channel_record[i] = -1;
2792 }
2793
2794 dev->flags = 0;
2795
2796 // Allocate cell rates and remember ASIC version
2797 // Fibre: ATM_OC3_PCR = 1555200000/8/270*260/53 - 29/53
2798 // Copper: (WRONG) we want 6 into the above, close to 25Mb/s
2799 // Copper: (plagarise!) 25600000/8/270*260/53 - n/53
2800
2801 if (hrz_init(dev)) {
2802 // to be really pedantic, this should be ATM_OC3c_PCR
2803 dev->tx_avail = ATM_OC3_PCR;
2804 dev->rx_avail = ATM_OC3_PCR;
2805 set_bit(ultra, &dev->flags); // NOT "|= ultra" !
2806 } else {
2807 dev->tx_avail = ((25600000/8)*26)/(27*53);
2808 dev->rx_avail = ((25600000/8)*26)/(27*53);
2809 PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering.");
2810 }
2811
2812 // rate changes spinlock
2813 spin_lock_init(&dev->rate_lock);
2814
2815 // on-board memory access spinlock; we want atomic reads and
2816 // writes to adapter memory (handles IRQ and SMP)
2817 spin_lock_init(&dev->mem_lock);
2818
2819 init_waitqueue_head(&dev->tx_queue);
2820
2821 // vpi in 0..4, vci in 6..10
2822 dev->atm_dev->ci_range.vpi_bits = vpi_bits;
2823 dev->atm_dev->ci_range.vci_bits = 10-vpi_bits;
2824
2825 init_timer(&dev->housekeeping);
2826 dev->housekeeping.function = do_housekeeping;
2827 dev->housekeeping.data = (unsigned long) dev;
2828 mod_timer(&dev->housekeeping, jiffies);
2829
2830out:
2831 return err;
2832
2833out_free_irq:
2834 free_irq(dev->irq, dev);
2835out_free:
2836 kfree(dev);
2837out_release:
2838 release_region(iobase, HRZ_IO_EXTENT);
2839out_disable:
2840 pci_disable_device(pci_dev);
2841 goto out;
2842}
2843
2844static void __devexit hrz_remove_one(struct pci_dev *pci_dev)
2845{
2846 hrz_dev *dev;
2847
2848 dev = pci_get_drvdata(pci_dev);
2849
2850 PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev);
2851 del_timer_sync(&dev->housekeeping);
2852 hrz_reset(dev);
2853 atm_dev_deregister(dev->atm_dev);
2854 free_irq(dev->irq, dev);
2855 release_region(dev->iobase, HRZ_IO_EXTENT);
2856 kfree(dev);
2857
2858 pci_disable_device(pci_dev);
2859}
2860
2861static void __init hrz_check_args (void) {
2862#ifdef DEBUG_HORIZON
2863 PRINTK (KERN_NOTICE, "debug bitmap is %hx", debug &= DBG_MASK);
2864#else
2865 if (debug)
2866 PRINTK (KERN_NOTICE, "no debug support in this image");
2867#endif
2868
2869 if (vpi_bits > HRZ_MAX_VPI)
2870 PRINTK (KERN_ERR, "vpi_bits has been limited to %hu",
2871 vpi_bits = HRZ_MAX_VPI);
2872
2873 if (max_tx_size < 0 || max_tx_size > TX_AAL5_LIMIT)
2874 PRINTK (KERN_NOTICE, "max_tx_size has been limited to %hu",
2875 max_tx_size = TX_AAL5_LIMIT);
2876
2877 if (max_rx_size < 0 || max_rx_size > RX_AAL5_LIMIT)
2878 PRINTK (KERN_NOTICE, "max_rx_size has been limited to %hu",
2879 max_rx_size = RX_AAL5_LIMIT);
2880
2881 return;
2882}
2883
2884MODULE_AUTHOR(maintainer_string);
2885MODULE_DESCRIPTION(description_string);
2886MODULE_LICENSE("GPL");
2887module_param(debug, ushort, 0644);
2888module_param(vpi_bits, ushort, 0);
2889module_param(max_tx_size, int, 0);
2890module_param(max_rx_size, int, 0);
2891module_param(pci_lat, byte, 0);
2892MODULE_PARM_DESC(debug, "debug bitmap, see .h file");
2893MODULE_PARM_DESC(vpi_bits, "number of bits (0..4) to allocate to VPIs");
2894MODULE_PARM_DESC(max_tx_size, "maximum size of TX AAL5 frames");
2895MODULE_PARM_DESC(max_rx_size, "maximum size of RX AAL5 frames");
2896MODULE_PARM_DESC(pci_lat, "PCI latency in bus cycles");
2897
2898static struct pci_device_id hrz_pci_tbl[] = {
2899 { PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_HORIZON, PCI_ANY_ID, PCI_ANY_ID,
2900 0, 0, 0 },
2901 { 0, }
2902};
2903
2904MODULE_DEVICE_TABLE(pci, hrz_pci_tbl);
2905
2906static struct pci_driver hrz_driver = {
2907 .name = "horizon",
2908 .probe = hrz_probe,
2909 .remove = __devexit_p(hrz_remove_one),
2910 .id_table = hrz_pci_tbl,
2911};
2912
2913/********** module entry **********/
2914
2915static int __init hrz_module_init (void) {
2916 // sanity check - cast is needed since printk does not support %Zu
2917 if (sizeof(struct MEMMAP) != 128*1024/4) {
2918 PRINTK (KERN_ERR, "Fix struct MEMMAP (is %lu fakewords).",
2919 (unsigned long) sizeof(struct MEMMAP));
2920 return -ENOMEM;
2921 }
2922
2923 show_version();
2924
2925 // check arguments
2926 hrz_check_args();
2927
2928 // get the juice
2929 return pci_register_driver(&hrz_driver);
2930}
2931
2932/********** module exit **********/
2933
2934static void __exit hrz_module_exit (void) {
2935 PRINTD (DBG_FLOW, "cleanup_module");
Tobias Klauserb45eccd2006-10-20 19:49:45 -07002936
2937 pci_unregister_driver(&hrz_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002938}
2939
2940module_init(hrz_module_init);
2941module_exit(hrz_module_exit);