blob: 7a081346f07932a977e2743626b40afb6d291b68 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "Infrared-port device drivers"
2 depends on IRDA!=n
3
4comment "SIR device drivers"
5
6config IRTTY_SIR
7 tristate "IrTTY (uses Linux serial driver)"
8 depends on IRDA
9 help
10 Say Y here if you want to build support for the IrTTY line
11 discipline. To compile it as a module, choose M here: the module
12 will be called irtty-sir. IrTTY makes it possible to use Linux's
13 own serial driver for all IrDA ports that are 16550 compatible.
14 Most IrDA chips are 16550 compatible so you should probably say Y
15 to this option. Using IrTTY will however limit the speed of the
16 connection to 115200 bps (IrDA SIR mode).
17
18 If unsure, say Y.
19
20comment "Dongle support"
21
22config DONGLE
23 bool "Serial dongle support"
24 depends on IRTTY_SIR
25 help
26 Say Y here if you have an infrared device that connects to your
27 computer's serial port. These devices are called dongles. Then say Y
28 or M to the driver for your particular dongle below.
29
30 Note that the answer to this question won't directly affect the
31 kernel: saying N will just cause the configurator to skip all
32 the questions about serial dongles.
33
34config ESI_DONGLE
35 tristate "ESI JetEye PC dongle"
36 depends on DONGLE && IRDA
37 help
38 Say Y here if you want to build support for the Extended Systems
39 JetEye PC dongle. To compile it as a module, choose M here. The ESI
40 dongle attaches to the normal 9-pin serial port connector, and can
41 currently only be used by IrTTY. To activate support for ESI
42 dongles you will have to start irattach like this:
43 "irattach -d esi".
44
45config ACTISYS_DONGLE
46 tristate "ACTiSYS IR-220L and IR220L+ dongle"
47 depends on DONGLE && IRDA
48 help
49 Say Y here if you want to build support for the ACTiSYS IR-220L and
50 IR220L+ dongles. To compile it as a module, choose M here. The
51 ACTiSYS dongles attaches to the normal 9-pin serial port connector,
52 and can currently only be used by IrTTY. To activate support for
53 ACTiSYS dongles you will have to start irattach like this:
54 "irattach -d actisys" or "irattach -d actisys+".
55
56config TEKRAM_DONGLE
57 tristate "Tekram IrMate 210B dongle"
58 depends on DONGLE && IRDA
59 help
60 Say Y here if you want to build support for the Tekram IrMate 210B
61 dongle. To compile it as a module, choose M here. The Tekram dongle
62 attaches to the normal 9-pin serial port connector, and can
63 currently only be used by IrTTY. To activate support for Tekram
64 dongles you will have to start irattach like this:
65 "irattach -d tekram".
66
67config LITELINK_DONGLE
68 tristate "Parallax LiteLink dongle"
69 depends on DONGLE && IRDA
70 help
71 Say Y here if you want to build support for the Parallax Litelink
72 dongle. To compile it as a module, choose M here. The Parallax
73 dongle attaches to the normal 9-pin serial port connector, and can
74 currently only be used by IrTTY. To activate support for Parallax
75 dongles you will have to start irattach like this:
76 "irattach -d litelink".
77
78config MA600_DONGLE
79 tristate "Mobile Action MA600 dongle"
80 depends on DONGLE && IRDA && EXPERIMENTAL
81 help
82 Say Y here if you want to build support for the Mobile Action MA600
83 dongle. To compile it as a module, choose M here. The MA600 dongle
84 attaches to the normal 9-pin serial port connector, and can
85 currently only be used by IrTTY. The driver should also support
86 the MA620 USB version of the dongle, if the integrated USB-to-RS232
87 converter is supported by usbserial. To activate support for
88 MA600 dongle you will have to start irattach like this:
89 "irattach -d ma600".
90
91config GIRBIL_DONGLE
92 tristate "Greenwich GIrBIL dongle"
93 depends on DONGLE && IRDA && EXPERIMENTAL
94 help
95 Say Y here if you want to build support for the Greenwich GIrBIL
96 dongle. If you want to compile it as a module, choose M here.
97 The Greenwich dongle attaches to the normal 9-pin serial port
98 connector, and can currently only be used by IrTTY. To activate
99 support for Greenwich dongles you will have to start irattach
100 like this: "irattach -d girbil".
101
102config MCP2120_DONGLE
103 tristate "Microchip MCP2120"
104 depends on DONGLE && IRDA && EXPERIMENTAL
105 help
106 Say Y here if you want to build support for the Microchip MCP2120
107 dongle. If you want to compile it as a module, choose M here.
108 The MCP2120 dongle attaches to the normal 9-pin serial port
109 connector, and can currently only be used by IrTTY. To activate
110 support for MCP2120 dongles you will have to start irattach
111 like this: "irattach -d mcp2120".
112
113 You must build this dongle yourself. For more information see:
114 <http://www.eyetap.org/~tangf/irda_sir_linux.html>
115
116config OLD_BELKIN_DONGLE
117 tristate "Old Belkin dongle"
118 depends on DONGLE && IRDA && EXPERIMENTAL
119 help
120 Say Y here if you want to build support for the Adaptec Airport 1000
121 and 2000 dongles. If you want to compile it as a module, choose
122 M here. Some information is contained in the comments
123 at the top of <file:drivers/net/irda/old_belkin.c>.
124
125config ACT200L_DONGLE
126 tristate "ACTiSYS IR-200L dongle"
127 depends on DONGLE && IRDA && EXPERIMENTAL
128 help
129 Say Y here if you want to build support for the ACTiSYS IR-200L
130 dongle. If you want to compile it as a module, choose M here.
131 The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
132 port connector, and can currently only be used by IrTTY.
133 To activate support for ACTiSYS IR-200L dongle you will have to
134 start irattach like this: "irattach -d act200l".
135
136comment "Old SIR device drivers"
137
138config IRPORT_SIR
139 tristate "IrPORT (IrDA serial driver)"
140 depends on IRDA && BROKEN_ON_SMP
141 ---help---
142 Say Y here if you want to build support for the IrPORT IrDA device
143 driver. To compile it as a module, choose M here: the module will be
144 called irport. IrPORT can be used instead of IrTTY and sometimes
145 this can be better. One example is if your IrDA port does not
146 have echo-canceling, which will work OK with IrPORT since this
147 driver is working in half-duplex mode only. You don't need to use
148 irattach with IrPORT, but you just insert it the same way as FIR
149 drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
150 SIR device driver which means that speed is limited to 115200 bps.
151
152 If unsure, say Y.
153
154comment "Old Serial dongle support"
155
156config DONGLE_OLD
157 bool "Old Serial dongle support"
Adrian Bunk65e480a2006-01-10 13:11:44 -0800158 depends on IRPORT_SIR && BROKEN_ON_SMP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159 help
160 Say Y here if you have an infrared device that connects to your
161 computer's serial port. These devices are called dongles. Then say Y
162 or M to the driver for your particular dongle below.
163
164 Note that the answer to this question won't directly affect the
165 kernel: saying N will just cause the configurator to skip all
166 the questions about serial dongles.
167
168config ESI_DONGLE_OLD
169 tristate "ESI JetEye PC dongle"
170 depends on DONGLE_OLD && IRDA
171 help
172 Say Y here if you want to build support for the Extended Systems
173 JetEye PC dongle. To compile it as a module, choose M here. The ESI
174 dongle attaches to the normal 9-pin serial port connector, and can
175 currently only be used by IrTTY. To activate support for ESI
176 dongles you will have to start irattach like this:
177 "irattach -d esi".
178
179config ACTISYS_DONGLE_OLD
180 tristate "ACTiSYS IR-220L and IR220L+ dongle"
181 depends on DONGLE_OLD && IRDA
182 help
183 Say Y here if you want to build support for the ACTiSYS IR-220L and
184 IR220L+ dongles. To compile it as a module, choose M here. The
185 ACTiSYS dongles attaches to the normal 9-pin serial port connector,
186 and can currently only be used by IrTTY. To activate support for
187 ACTiSYS dongles you will have to start irattach like this:
188 "irattach -d actisys" or "irattach -d actisys+".
189
190config TEKRAM_DONGLE_OLD
191 tristate "Tekram IrMate 210B dongle"
192 depends on DONGLE_OLD && IRDA
193 help
194 Say Y here if you want to build support for the Tekram IrMate 210B
195 dongle. To compile it as a module, choose M here. The Tekram dongle
196 attaches to the normal 9-pin serial port connector, and can
197 currently only be used by IrTTY. To activate support for Tekram
198 dongles you will have to start irattach like this:
199 "irattach -d tekram".
200
201config GIRBIL_DONGLE_OLD
202 tristate "Greenwich GIrBIL dongle"
203 depends on DONGLE_OLD && IRDA
204 help
205 Say Y here if you want to build support for the Greenwich GIrBIL
206 dongle. To compile it as a module, choose M here. The Greenwich
207 dongle attaches to the normal 9-pin serial port connector, and can
208 currently only be used by IrTTY. To activate support for Greenwich
209 dongles you will have to insert "irattach -d girbil" in the
210 /etc/irda/drivers script.
211
212config LITELINK_DONGLE_OLD
213 tristate "Parallax LiteLink dongle"
214 depends on DONGLE_OLD && IRDA
215 help
216 Say Y here if you want to build support for the Parallax Litelink
217 dongle. To compile it as a module, choose M here. The Parallax
218 dongle attaches to the normal 9-pin serial port connector, and can
219 currently only be used by IrTTY. To activate support for Parallax
220 dongles you will have to start irattach like this:
221 "irattach -d litelink".
222
223config MCP2120_DONGLE_OLD
224 tristate "Microchip MCP2120"
225 depends on DONGLE_OLD && IRDA
226 help
227 Say Y here if you want to build support for the Microchip MCP2120
228 dongle. To compile it as a module, choose M here. The MCP2120 dongle
229 attaches to the normal 9-pin serial port connector, and can
230 currently only be used by IrTTY. To activate support for MCP2120
231 dongles you will have to insert "irattach -d mcp2120" in the
232 /etc/irda/drivers script.
233
234 You must build this dongle yourself. For more information see:
235 <http://www.eyetap.org/~tangf/irda_sir_linux.html>
236
237config OLD_BELKIN_DONGLE_OLD
238 tristate "Old Belkin dongle"
239 depends on DONGLE_OLD && IRDA
240 help
241 Say Y here if you want to build support for the Adaptec Airport 1000
242 and 2000 dongles. To compile it as a module, choose M here: the module
243 will be called old_belkin. Some information is contained in the
244 comments at the top of <file:drivers/net/irda/old_belkin.c>.
245
246config ACT200L_DONGLE_OLD
247 tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
248 depends on DONGLE_OLD && EXPERIMENTAL && IRDA
249 help
250 Say Y here if you want to build support for the ACTiSYS IR-200L
251 dongle. To compile it as a module, choose M here. The ACTiSYS
252 IR-200L dongle attaches to the normal 9-pin serial port connector,
253 and can currently only be used by IrTTY. To activate support for
254 ACTiSYS IR-200L dongles you will have to start irattach like this:
255 "irattach -d act200l".
256
257config MA600_DONGLE_OLD
258 tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
259 depends on DONGLE_OLD && EXPERIMENTAL && IRDA
260 ---help---
261 Say Y here if you want to build support for the Mobile Action MA600
262 dongle. To compile it as a module, choose M here. The MA600 dongle
263 attaches to the normal 9-pin serial port connector, and can
264 currently only be tested on IrCOMM. To activate support for MA600
265 dongles you will have to insert "irattach -d ma600" in the
266 /etc/irda/drivers script. Note: irutils 0.9.15 requires no
267 modification. irutils 0.9.9 needs modification. For more
268 information, download the following tar gzip file.
269
270 There is a pre-compiled module on
271 <http://engsvr.ust.hk/~eetwl95/ma600.html>
272
273config EP7211_IR
274 tristate "EP7211 I/R support"
275 depends on DONGLE_OLD && ARCH_EP7211 && IRDA
276
277comment "FIR device drivers"
278
279config USB_IRDA
280 tristate "IrDA USB dongles"
281 depends on IRDA && USB
282 ---help---
283 Say Y here if you want to build support for the USB IrDA FIR Dongle
284 device driver. To compile it as a module, choose M here: the module
285 will be called irda-usb. IrDA-USB support the various IrDA USB
286 dongles available and most of their pecularities. Those dongles
287 plug in the USB port of your computer, are plug and play, and
288 support SIR and FIR (4Mbps) speeds. On the other hand, those
289 dongles tend to be less efficient than a FIR chipset.
290
291 Please note that the driver is still experimental. And of course,
292 you will need both USB and IrDA support in your kernel...
293
294config SIGMATEL_FIR
295 tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
296 depends on IRDA && USB && EXPERIMENTAL
297 select CRC32
298 ---help---
299 Say Y here if you want to build support for the SigmaTel STIr4200
300 USB IrDA FIR bridge device driver.
301
302 USB bridge based on the SigmaTel STIr4200 don't conform to the
303 IrDA-USB device class specification, and therefore need their
304 own specific driver. Those dongles support SIR and FIR (4Mbps)
305 speeds.
306
307 To compile it as a module, choose M here: the module will be called
308 stir4200.
309
310config NSC_FIR
311 tristate "NSC PC87108/PC87338"
Al Viro56c3b7d2005-05-04 05:39:52 +0100312 depends on IRDA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313 help
314 Say Y here if you want to build support for the NSC PC87108 and
315 PC87338 IrDA chipsets. This driver supports SIR,
316 MIR and FIR (4Mbps) speeds.
317
318 To compile it as a module, choose M here: the module will be called
319 nsc-ircc.
320
321config WINBOND_FIR
322 tristate "Winbond W83977AF (IR)"
Al Viro56c3b7d2005-05-04 05:39:52 +0100323 depends on IRDA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700324 help
325 Say Y here if you want to build IrDA support for the Winbond
326 W83977AF super-io chipset. This driver should be used for the IrDA
327 chipset in the Corel NetWinder. The driver supports SIR, MIR and
328 FIR (4Mbps) speeds.
329
330 To compile it as a module, choose M here: the module will be called
331 w83977af_ir.
332
333config TOSHIBA_FIR
334 tristate "Toshiba Type-O IR Port"
335 depends on IRDA && PCI && !64BIT
336 help
337 Say Y here if you want to build support for the Toshiba Type-O IR
338 and Donau oboe chipsets. These chipsets are used by the Toshiba
339 Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
340 To compile it as a module, choose M here: the module will be called
341 donauboe.
342
343config AU1000_FIR
344 tristate "Alchemy Au1000 SIR/FIR"
345 depends on MIPS_AU1000 && IRDA
346
347config SMC_IRCC_FIR
348 tristate "SMSC IrCC (EXPERIMENTAL)"
Al Viro56c3b7d2005-05-04 05:39:52 +0100349 depends on EXPERIMENTAL && IRDA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350 help
351 Say Y here if you want to build support for the SMC Infrared
352 Communications Controller. It is used in a wide variety of
353 laptops (Fujitsu, Sony, Compaq and some Toshiba).
354 To compile it as a module, choose M here: the module will be called
355 smsc-ircc2.o.
356
357config ALI_FIR
358 tristate "ALi M5123 FIR (EXPERIMENTAL)"
Al Viro56c3b7d2005-05-04 05:39:52 +0100359 depends on EXPERIMENTAL && IRDA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360 help
361 Say Y here if you want to build support for the ALi M5123 FIR
362 Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
363 M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
364 SIR, MIR and FIR (4Mbps) speeds.
365
366 To compile it as a module, choose M here: the module will be called
367 ali-ircc.
368
369config VLSI_FIR
370 tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
371 depends on EXPERIMENTAL && IRDA && PCI
372 help
373 Say Y here if you want to build support for the VLSI 82C147
374 PCI-IrDA Controller. This controller is used by the HP OmniBook 800
375 and 5500 notebooks. The driver provides support for SIR, MIR and
376 FIR (4Mbps) speeds.
377
378 To compile it as a module, choose M here: the module will be called
379 vlsi_ir.
380
381config SA1100_FIR
382 tristate "SA1100 Internal IR"
383 depends on ARCH_SA1100 && IRDA
384
385config VIA_FIR
386 tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
Al Viro56c3b7d2005-05-04 05:39:52 +0100387 depends on IRDA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388 help
389 Say Y here if you want to build support for the VIA VT8231
390 and VIA VT1211 IrDA controllers, found on the motherboards using
Geert Uytterhoeven392a8b72005-06-12 10:57:40 +0200391 those VIA chipsets. To use this controller, you will need
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392 to plug a specific 5 pins FIR IrDA dongle in the specific
393 motherboard connector. The driver provides support for SIR, MIR
394 and FIR (4Mbps) speeds.
395
396 You will need to specify the 'dongle_id' module parameter to
397 indicate the FIR dongle attached to the controller.
398
399 To compile it as a module, choose M here: the module will be called
400 via-ircc.
401
Nicolas Pitre6f475c02005-10-28 16:39:33 +0100402config PXA_FICP
403 tristate "Intel PXA2xx Internal FICP"
404 depends on ARCH_PXA && IRDA
405 help
406 Say Y or M here if you want to build support for the PXA2xx
407 built-in IRDA interface which can support both SIR and FIR.
408 This driver relies on platform specific helper routines so
409 available capabilities may vary from one PXA2xx target to
410 another.
411
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412endmenu
413