blob: 72cb67b66e0c85144c6544920299d5348708458e [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
23
24#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
25 SUPPORTED_10baseT_Full | \
26 SUPPORTED_100baseT_Half | \
27 SUPPORTED_100baseT_Full | \
28 SUPPORTED_Autoneg | \
29 SUPPORTED_TP | \
30 SUPPORTED_MII)
31
32#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
33 SUPPORTED_1000baseT_Half | \
34 SUPPORTED_1000baseT_Full)
35
36/* Set phydev->irq to PHY_POLL if interrupts are not supported,
37 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
38 * the attached driver handles the interrupt
39 */
40#define PHY_POLL -1
41#define PHY_IGNORE_INTERRUPT -2
42
43#define PHY_HAS_INTERRUPT 0x00000001
44#define PHY_HAS_MAGICANEG 0x00000002
45
46#define MII_BUS_MAX 4
47
48
49#define PHY_INIT_TIMEOUT 100000
50#define PHY_STATE_TIME 1
51#define PHY_FORCE_TIMEOUT 10
52#define PHY_AN_TIMEOUT 10
53
54#define PHY_MAX_ADDR 32
55
56/* The Bus class for PHYs. Devices which provide access to
57 * PHYs should register using this structure */
58struct mii_bus {
59 const char *name;
60 int id;
61 void *priv;
62 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
63 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
64 int (*reset)(struct mii_bus *bus);
65
66 /* A lock to ensure that only one thing can read/write
67 * the MDIO bus at a time */
68 spinlock_t mdio_lock;
69
70 struct device *dev;
71
72 /* list of all PHYs on bus */
73 struct phy_device *phy_map[PHY_MAX_ADDR];
74
75 /* Pointer to an array of interrupts, each PHY's
76 * interrupt at the index matching its address */
77 int *irq;
78};
79
80#define PHY_INTERRUPT_DISABLED 0x0
81#define PHY_INTERRUPT_ENABLED 0x80000000
82
83/* PHY state machine states:
84 *
85 * DOWN: PHY device and driver are not ready for anything. probe
86 * should be called if and only if the PHY is in this state,
87 * given that the PHY device exists.
88 * - PHY driver probe function will, depending on the PHY, set
89 * the state to STARTING or READY
90 *
91 * STARTING: PHY device is coming up, and the ethernet driver is
92 * not ready. PHY drivers may set this in the probe function.
93 * If they do, they are responsible for making sure the state is
94 * eventually set to indicate whether the PHY is UP or READY,
95 * depending on the state when the PHY is done starting up.
96 * - PHY driver will set the state to READY
97 * - start will set the state to PENDING
98 *
99 * READY: PHY is ready to send and receive packets, but the
100 * controller is not. By default, PHYs which do not implement
101 * probe will be set to this state by phy_probe(). If the PHY
102 * driver knows the PHY is ready, and the PHY state is STARTING,
103 * then it sets this STATE.
104 * - start will set the state to UP
105 *
106 * PENDING: PHY device is coming up, but the ethernet driver is
107 * ready. phy_start will set this state if the PHY state is
108 * STARTING.
109 * - PHY driver will set the state to UP when the PHY is ready
110 *
111 * UP: The PHY and attached device are ready to do work.
112 * Interrupts should be started here.
113 * - timer moves to AN
114 *
115 * AN: The PHY is currently negotiating the link state. Link is
116 * therefore down for now. phy_timer will set this state when it
117 * detects the state is UP. config_aneg will set this state
118 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
119 * - If autonegotiation finishes, but there's no link, it sets
120 * the state to NOLINK.
121 * - If aneg finishes with link, it sets the state to RUNNING,
122 * and calls adjust_link
123 * - If autonegotiation did not finish after an arbitrary amount
124 * of time, autonegotiation should be tried again if the PHY
125 * supports "magic" autonegotiation (back to AN)
126 * - If it didn't finish, and no magic_aneg, move to FORCING.
127 *
128 * NOLINK: PHY is up, but not currently plugged in.
129 * - If the timer notes that the link comes back, we move to RUNNING
130 * - config_aneg moves to AN
131 * - phy_stop moves to HALTED
132 *
133 * FORCING: PHY is being configured with forced settings
134 * - if link is up, move to RUNNING
135 * - If link is down, we drop to the next highest setting, and
136 * retry (FORCING) after a timeout
137 * - phy_stop moves to HALTED
138 *
139 * RUNNING: PHY is currently up, running, and possibly sending
140 * and/or receiving packets
141 * - timer will set CHANGELINK if we're polling (this ensures the
142 * link state is polled every other cycle of this state machine,
143 * which makes it every other second)
144 * - irq will set CHANGELINK
145 * - config_aneg will set AN
146 * - phy_stop moves to HALTED
147 *
148 * CHANGELINK: PHY experienced a change in link state
149 * - timer moves to RUNNING if link
150 * - timer moves to NOLINK if the link is down
151 * - phy_stop moves to HALTED
152 *
153 * HALTED: PHY is up, but no polling or interrupts are done. Or
154 * PHY is in an error state.
155 *
156 * - phy_start moves to RESUMING
157 *
158 * RESUMING: PHY was halted, but now wants to run again.
159 * - If we are forcing, or aneg is done, timer moves to RUNNING
160 * - If aneg is not done, timer moves to AN
161 * - phy_stop moves to HALTED
162 */
163enum phy_state {
164 PHY_DOWN=0,
165 PHY_STARTING,
166 PHY_READY,
167 PHY_PENDING,
168 PHY_UP,
169 PHY_AN,
170 PHY_RUNNING,
171 PHY_NOLINK,
172 PHY_FORCING,
173 PHY_CHANGELINK,
174 PHY_HALTED,
175 PHY_RESUMING
176};
177
178/* phy_device: An instance of a PHY
179 *
180 * drv: Pointer to the driver for this PHY instance
181 * bus: Pointer to the bus this PHY is on
182 * dev: driver model device structure for this PHY
183 * phy_id: UID for this device found during discovery
184 * state: state of the PHY for management purposes
185 * dev_flags: Device-specific flags used by the PHY driver.
186 * addr: Bus address of PHY
187 * link_timeout: The number of timer firings to wait before the
188 * giving up on the current attempt at acquiring a link
189 * irq: IRQ number of the PHY's interrupt (-1 if none)
190 * phy_timer: The timer for handling the state machine
191 * phy_queue: A work_queue for the interrupt
192 * attached_dev: The attached enet driver's device instance ptr
193 * adjust_link: Callback for the enet controller to respond to
194 * changes in the link state.
195 * adjust_state: Callback for the enet driver to respond to
196 * changes in the state machine.
197 *
198 * speed, duplex, pause, supported, advertising, and
199 * autoneg are used like in mii_if_info
200 *
201 * interrupts currently only supports enabled or disabled,
202 * but could be changed in the future to support enabling
203 * and disabling specific interrupts
204 *
205 * Contains some infrastructure for polling and interrupt
206 * handling, as well as handling shifts in PHY hardware state
207 */
208struct phy_device {
209 /* Information about the PHY type */
210 /* And management functions */
211 struct phy_driver *drv;
212
213 struct mii_bus *bus;
214
215 struct device dev;
216
217 u32 phy_id;
218
219 enum phy_state state;
220
221 u32 dev_flags;
222
223 /* Bus address of the PHY (0-32) */
224 int addr;
225
226 /* forced speed & duplex (no autoneg)
227 * partner speed & duplex & pause (autoneg)
228 */
229 int speed;
230 int duplex;
231 int pause;
232 int asym_pause;
233
234 /* The most recently read link state */
235 int link;
236
237 /* Enabled Interrupts */
238 u32 interrupts;
239
240 /* Union of PHY and Attached devices' supported modes */
241 /* See mii.h for more info */
242 u32 supported;
243 u32 advertising;
244
245 int autoneg;
246
247 int link_timeout;
248
249 /* Interrupt number for this PHY
250 * -1 means no interrupt */
251 int irq;
252
253 /* private data pointer */
254 /* For use by PHYs to maintain extra state */
255 void *priv;
256
257 /* Interrupt and Polling infrastructure */
258 struct work_struct phy_queue;
259 struct timer_list phy_timer;
260
261 spinlock_t lock;
262
263 struct net_device *attached_dev;
264
265 void (*adjust_link)(struct net_device *dev);
266
267 void (*adjust_state)(struct net_device *dev);
268};
269#define to_phy_device(d) container_of(d, struct phy_device, dev)
270
271/* struct phy_driver: Driver structure for a particular PHY type
272 *
273 * phy_id: The result of reading the UID registers of this PHY
274 * type, and ANDing them with the phy_id_mask. This driver
275 * only works for PHYs with IDs which match this field
276 * name: The friendly name of this PHY type
277 * phy_id_mask: Defines the important bits of the phy_id
278 * features: A list of features (speed, duplex, etc) supported
279 * by this PHY
280 * flags: A bitfield defining certain other features this PHY
281 * supports (like interrupts)
282 *
283 * The drivers must implement config_aneg and read_status. All
284 * other functions are optional. Note that none of these
285 * functions should be called from interrupt time. The goal is
286 * for the bus read/write functions to be able to block when the
287 * bus transaction is happening, and be freed up by an interrupt
288 * (The MPC85xx has this ability, though it is not currently
289 * supported in the driver).
290 */
291struct phy_driver {
292 u32 phy_id;
293 char *name;
294 unsigned int phy_id_mask;
295 u32 features;
296 u32 flags;
297
298 /* Called to initialize the PHY,
299 * including after a reset */
300 int (*config_init)(struct phy_device *phydev);
301
302 /* Called during discovery. Used to set
303 * up device-specific structures, if any */
304 int (*probe)(struct phy_device *phydev);
305
306 /* PHY Power Management */
307 int (*suspend)(struct phy_device *phydev);
308 int (*resume)(struct phy_device *phydev);
309
310 /* Configures the advertisement and resets
311 * autonegotiation if phydev->autoneg is on,
312 * forces the speed to the current settings in phydev
313 * if phydev->autoneg is off */
314 int (*config_aneg)(struct phy_device *phydev);
315
316 /* Determines the negotiated speed and duplex */
317 int (*read_status)(struct phy_device *phydev);
318
319 /* Clears any pending interrupts */
320 int (*ack_interrupt)(struct phy_device *phydev);
321
322 /* Enables or disables interrupts */
323 int (*config_intr)(struct phy_device *phydev);
324
325 /* Clears up any memory if needed */
326 void (*remove)(struct phy_device *phydev);
327
328 struct device_driver driver;
329};
330#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
331
332int phy_read(struct phy_device *phydev, u16 regnum);
333int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
334struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
335int phy_clear_interrupt(struct phy_device *phydev);
336int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Andy Fleminge1393452005-08-24 18:46:21 -0500337struct phy_device * phy_attach(struct net_device *dev,
338 const char *phy_id, u32 flags);
339struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
340 void (*handler)(struct net_device *), u32 flags);
341void phy_disconnect(struct phy_device *phydev);
342void phy_detach(struct phy_device *phydev);
343void phy_start(struct phy_device *phydev);
344void phy_stop(struct phy_device *phydev);
345int phy_start_aneg(struct phy_device *phydev);
346
347int mdiobus_register(struct mii_bus *bus);
348void mdiobus_unregister(struct mii_bus *bus);
349void phy_sanitize_settings(struct phy_device *phydev);
350int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400351
352static inline int phy_read_status(struct phy_device *phydev) {
353 return phydev->drv->read_status(phydev);
354}
355
Andy Fleminge1393452005-08-24 18:46:21 -0500356int genphy_config_advert(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400357int genphy_setup_forced(struct phy_device *phydev);
358int genphy_restart_aneg(struct phy_device *phydev);
359int genphy_config_aneg(struct phy_device *phydev);
360int genphy_update_link(struct phy_device *phydev);
361int genphy_read_status(struct phy_device *phydev);
362void phy_driver_unregister(struct phy_driver *drv);
363int phy_driver_register(struct phy_driver *new_driver);
364void phy_prepare_link(struct phy_device *phydev,
365 void (*adjust_link)(struct net_device *));
366void phy_start_machine(struct phy_device *phydev,
367 void (*handler)(struct net_device *));
368void phy_stop_machine(struct phy_device *phydev);
369int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
370int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
371int phy_mii_ioctl(struct phy_device *phydev,
372 struct mii_ioctl_data *mii_data, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500373int phy_start_interrupts(struct phy_device *phydev);
374void phy_print_status(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400375
376extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400377#endif /* __PHY_H */