blob: 0a6577577e8d674252ea8b2a025f4a23515c5681 [file] [log] [blame]
Mark Browne4ee8312009-07-28 15:21:49 +01001/*
2 * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series
3 *
4 * Copyright 2009 Wolfson Microelectronics PLC.
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/init.h>
17#include <linux/bitops.h>
18#include <linux/err.h>
19#include <linux/i2c.h>
20#include <linux/platform_device.h>
21#include <linux/regulator/driver.h>
Mark Browne24a04c2009-09-22 08:47:11 -070022#include <linux/regulator/machine.h>
23#include <linux/gpio.h>
Mark Browne4ee8312009-07-28 15:21:49 +010024
25#include <linux/mfd/wm831x/core.h>
26#include <linux/mfd/wm831x/regulator.h>
27#include <linux/mfd/wm831x/pdata.h>
28
29#define WM831X_BUCKV_MAX_SELECTOR 0x68
30#define WM831X_BUCKP_MAX_SELECTOR 0x66
31
32#define WM831X_DCDC_MODE_FAST 0
33#define WM831X_DCDC_MODE_NORMAL 1
34#define WM831X_DCDC_MODE_IDLE 2
35#define WM831X_DCDC_MODE_STANDBY 3
36
37#define WM831X_DCDC_MAX_NAME 6
38
39/* Register offsets in control block */
40#define WM831X_DCDC_CONTROL_1 0
41#define WM831X_DCDC_CONTROL_2 1
42#define WM831X_DCDC_ON_CONFIG 2
43#define WM831X_DCDC_SLEEP_CONTROL 3
Mark Browne24a04c2009-09-22 08:47:11 -070044#define WM831X_DCDC_DVS_CONTROL 4
Mark Browne4ee8312009-07-28 15:21:49 +010045
46/*
47 * Shared
48 */
49
50struct wm831x_dcdc {
51 char name[WM831X_DCDC_MAX_NAME];
52 struct regulator_desc desc;
53 int base;
54 struct wm831x *wm831x;
55 struct regulator_dev *regulator;
Mark Browne24a04c2009-09-22 08:47:11 -070056 int dvs_gpio;
57 int dvs_gpio_state;
58 int on_vsel;
59 int dvs_vsel;
Mark Browne4ee8312009-07-28 15:21:49 +010060};
61
62static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
63{
64 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
65 struct wm831x *wm831x = dcdc->wm831x;
66 int mask = 1 << rdev_get_id(rdev);
67 int reg;
68
69 reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
70 if (reg < 0)
71 return reg;
72
73 if (reg & mask)
74 return 1;
75 else
76 return 0;
77}
78
79static int wm831x_dcdc_enable(struct regulator_dev *rdev)
80{
81 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
82 struct wm831x *wm831x = dcdc->wm831x;
83 int mask = 1 << rdev_get_id(rdev);
84
85 return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
86}
87
88static int wm831x_dcdc_disable(struct regulator_dev *rdev)
89{
90 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
91 struct wm831x *wm831x = dcdc->wm831x;
92 int mask = 1 << rdev_get_id(rdev);
93
94 return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
95}
96
97static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
98
99{
100 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
101 struct wm831x *wm831x = dcdc->wm831x;
102 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
103 int val;
104
105 val = wm831x_reg_read(wm831x, reg);
106 if (val < 0)
107 return val;
108
109 val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
110
111 switch (val) {
112 case WM831X_DCDC_MODE_FAST:
113 return REGULATOR_MODE_FAST;
114 case WM831X_DCDC_MODE_NORMAL:
115 return REGULATOR_MODE_NORMAL;
116 case WM831X_DCDC_MODE_STANDBY:
117 return REGULATOR_MODE_STANDBY;
118 case WM831X_DCDC_MODE_IDLE:
119 return REGULATOR_MODE_IDLE;
120 default:
121 BUG();
122 }
123}
124
125static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
126 unsigned int mode)
127{
128 int val;
129
130 switch (mode) {
131 case REGULATOR_MODE_FAST:
132 val = WM831X_DCDC_MODE_FAST;
133 break;
134 case REGULATOR_MODE_NORMAL:
135 val = WM831X_DCDC_MODE_NORMAL;
136 break;
137 case REGULATOR_MODE_STANDBY:
138 val = WM831X_DCDC_MODE_STANDBY;
139 break;
140 case REGULATOR_MODE_IDLE:
141 val = WM831X_DCDC_MODE_IDLE;
142 break;
143 default:
144 return -EINVAL;
145 }
146
147 return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
148 val << WM831X_DC1_ON_MODE_SHIFT);
149}
150
151static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
152{
153 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
154 struct wm831x *wm831x = dcdc->wm831x;
155 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
156
157 return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
158}
159
160static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
161 unsigned int mode)
162{
163 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
164 struct wm831x *wm831x = dcdc->wm831x;
165 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
166
167 return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
168}
169
170static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
171{
172 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
173 struct wm831x *wm831x = dcdc->wm831x;
174 int ret;
175
176 /* First, check for errors */
177 ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
178 if (ret < 0)
179 return ret;
180
181 if (ret & (1 << rdev_get_id(rdev))) {
182 dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
183 rdev_get_id(rdev) + 1);
184 return REGULATOR_STATUS_ERROR;
185 }
186
187 /* DCDC1 and DCDC2 can additionally detect high voltage/current */
188 if (rdev_get_id(rdev) < 2) {
189 if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
190 dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
191 rdev_get_id(rdev) + 1);
192 return REGULATOR_STATUS_ERROR;
193 }
194
195 if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
196 dev_dbg(wm831x->dev, "DCDC%d over current\n",
197 rdev_get_id(rdev) + 1);
198 return REGULATOR_STATUS_ERROR;
199 }
200 }
201
202 /* Is the regulator on? */
203 ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
204 if (ret < 0)
205 return ret;
206 if (!(ret & (1 << rdev_get_id(rdev))))
207 return REGULATOR_STATUS_OFF;
208
209 /* TODO: When we handle hardware control modes so we can report the
210 * current mode. */
211 return REGULATOR_STATUS_ON;
212}
213
214static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
215{
216 struct wm831x_dcdc *dcdc = data;
217
218 regulator_notifier_call_chain(dcdc->regulator,
219 REGULATOR_EVENT_UNDER_VOLTAGE,
220 NULL);
221
222 return IRQ_HANDLED;
223}
224
225static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
226{
227 struct wm831x_dcdc *dcdc = data;
228
229 regulator_notifier_call_chain(dcdc->regulator,
230 REGULATOR_EVENT_OVER_CURRENT,
231 NULL);
232
233 return IRQ_HANDLED;
234}
235
236/*
237 * BUCKV specifics
238 */
239
240static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
241 unsigned selector)
242{
243 if (selector <= 0x8)
244 return 600000;
245 if (selector <= WM831X_BUCKV_MAX_SELECTOR)
246 return 600000 + ((selector - 0x8) * 12500);
247 return -EINVAL;
248}
249
Mark Browne24a04c2009-09-22 08:47:11 -0700250static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
251 int min_uV, int max_uV)
Mark Browne4ee8312009-07-28 15:21:49 +0100252{
Mark Browne4ee8312009-07-28 15:21:49 +0100253 u16 vsel;
254
255 if (min_uV < 600000)
256 vsel = 0;
257 else if (min_uV <= 1800000)
258 vsel = ((min_uV - 600000) / 12500) + 8;
259 else
260 return -EINVAL;
261
262 if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
263 return -EINVAL;
264
Mark Browne24a04c2009-09-22 08:47:11 -0700265 return vsel;
266}
267
268static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,
269 int min_uV, int max_uV)
270{
271 u16 vsel;
272
273 if (max_uV < 600000 || max_uV > 1800000)
274 return -EINVAL;
275
276 vsel = ((max_uV - 600000) / 12500) + 8;
277
278 if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||
279 wm831x_buckv_list_voltage(rdev, vsel) < max_uV)
280 return -EINVAL;
281
282 return vsel;
283}
284
285static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
286{
287 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
288
289 if (state == dcdc->dvs_gpio_state)
290 return 0;
291
292 dcdc->dvs_gpio_state = state;
293 gpio_set_value(dcdc->dvs_gpio, state);
294
295 /* Should wait for DVS state change to be asserted if we have
296 * a GPIO for it, for now assume the device is configured
297 * for the fastest possible transition.
298 */
299
300 return 0;
Mark Browne4ee8312009-07-28 15:21:49 +0100301}
302
303static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
Mark Browne24a04c2009-09-22 08:47:11 -0700304 int min_uV, int max_uV)
Mark Browne4ee8312009-07-28 15:21:49 +0100305{
306 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
Mark Browne24a04c2009-09-22 08:47:11 -0700307 struct wm831x *wm831x = dcdc->wm831x;
308 int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
309 int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
310 int vsel, ret;
Mark Browne4ee8312009-07-28 15:21:49 +0100311
Mark Browne24a04c2009-09-22 08:47:11 -0700312 vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
313 if (vsel < 0)
314 return vsel;
315
316 /* If this value is already set then do a GPIO update if we can */
317 if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
318 return wm831x_buckv_set_dvs(rdev, 0);
319
320 if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)
321 return wm831x_buckv_set_dvs(rdev, 1);
322
323 /* Always set the ON status to the minimum voltage */
324 ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
325 if (ret < 0)
326 return ret;
327 dcdc->on_vsel = vsel;
328
329 if (!dcdc->dvs_gpio)
330 return ret;
331
332 /* Kick the voltage transition now */
333 ret = wm831x_buckv_set_dvs(rdev, 0);
334 if (ret < 0)
335 return ret;
336
337 /* Set the high voltage as the DVS voltage. This is optimised
338 * for CPUfreq usage, most processors will keep the maximum
339 * voltage constant and lower the minimum with the frequency. */
340 vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);
341 if (vsel < 0) {
342 /* This should never happen - at worst the same vsel
343 * should be chosen */
344 WARN_ON(vsel < 0);
345 return 0;
346 }
347
348 /* Don't bother if it's the same VSEL we're already using */
349 if (vsel == dcdc->on_vsel)
350 return 0;
351
352 ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);
353 if (ret == 0)
354 dcdc->dvs_vsel = vsel;
355 else
356 dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",
357 ret);
358
359 return 0;
Mark Browne4ee8312009-07-28 15:21:49 +0100360}
361
362static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
Mark Browne24a04c2009-09-22 08:47:11 -0700363 int uV)
Mark Browne4ee8312009-07-28 15:21:49 +0100364{
365 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
Mark Browne24a04c2009-09-22 08:47:11 -0700366 struct wm831x *wm831x = dcdc->wm831x;
Mark Browne4ee8312009-07-28 15:21:49 +0100367 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
Mark Browne24a04c2009-09-22 08:47:11 -0700368 int vsel;
Mark Browne4ee8312009-07-28 15:21:49 +0100369
Mark Browne24a04c2009-09-22 08:47:11 -0700370 vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
371 if (vsel < 0)
372 return vsel;
373
374 return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
Mark Browne4ee8312009-07-28 15:21:49 +0100375}
376
377static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
378{
379 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
Mark Browne4ee8312009-07-28 15:21:49 +0100380
Mark Browne24a04c2009-09-22 08:47:11 -0700381 if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
382 return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
383 else
384 return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
Mark Browne4ee8312009-07-28 15:21:49 +0100385}
386
387/* Current limit options */
388static u16 wm831x_dcdc_ilim[] = {
389 125, 250, 375, 500, 625, 750, 875, 1000
390};
391
392static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
393 int min_uA, int max_uA)
394{
395 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
396 struct wm831x *wm831x = dcdc->wm831x;
397 u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
398 int i;
399
400 for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
401 if (max_uA <= wm831x_dcdc_ilim[i])
402 break;
403 }
404 if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
405 return -EINVAL;
406
407 return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
408}
409
410static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
411{
412 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
413 struct wm831x *wm831x = dcdc->wm831x;
414 u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
415 int val;
416
417 val = wm831x_reg_read(wm831x, reg);
418 if (val < 0)
419 return val;
420
421 return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
422}
423
424static struct regulator_ops wm831x_buckv_ops = {
425 .set_voltage = wm831x_buckv_set_voltage,
426 .get_voltage = wm831x_buckv_get_voltage,
427 .list_voltage = wm831x_buckv_list_voltage,
428 .set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
429 .set_current_limit = wm831x_buckv_set_current_limit,
430 .get_current_limit = wm831x_buckv_get_current_limit,
431
432 .is_enabled = wm831x_dcdc_is_enabled,
433 .enable = wm831x_dcdc_enable,
434 .disable = wm831x_dcdc_disable,
435 .get_status = wm831x_dcdc_get_status,
436 .get_mode = wm831x_dcdc_get_mode,
437 .set_mode = wm831x_dcdc_set_mode,
438 .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
439};
440
Mark Browne24a04c2009-09-22 08:47:11 -0700441/*
442 * Set up DVS control. We just log errors since we can still run
443 * (with reduced performance) if we fail.
444 */
445static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
446 struct wm831x_buckv_pdata *pdata)
447{
448 struct wm831x *wm831x = dcdc->wm831x;
449 int ret;
450 u16 ctrl;
451
452 if (!pdata || !pdata->dvs_gpio)
453 return;
454
455 switch (pdata->dvs_control_src) {
456 case 1:
457 ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
458 break;
459 case 2:
460 ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
461 break;
462 default:
463 dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
464 pdata->dvs_control_src, dcdc->name);
465 return;
466 }
467
468 ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
469 WM831X_DC1_DVS_SRC_MASK, ctrl);
470 if (ret < 0) {
471 dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
472 dcdc->name, ret);
473 return;
474 }
475
476 ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
477 if (ret < 0) {
478 dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
479 dcdc->name, ret);
480 return;
481 }
482
483 /* gpiolib won't let us read the GPIO status so pick the higher
484 * of the two existing voltages so we take it as platform data.
485 */
486 dcdc->dvs_gpio_state = pdata->dvs_init_state;
487
488 ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
489 if (ret < 0) {
490 dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
491 dcdc->name, ret);
492 gpio_free(pdata->dvs_gpio);
493 return;
494 }
495
496 dcdc->dvs_gpio = pdata->dvs_gpio;
497}
498
Mark Browne4ee8312009-07-28 15:21:49 +0100499static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
500{
501 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
502 struct wm831x_pdata *pdata = wm831x->dev->platform_data;
503 int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
504 struct wm831x_dcdc *dcdc;
505 struct resource *res;
506 int ret, irq;
507
508 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
509
510 if (pdata == NULL || pdata->dcdc[id] == NULL)
511 return -ENODEV;
512
513 dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
514 if (dcdc == NULL) {
515 dev_err(&pdev->dev, "Unable to allocate private data\n");
516 return -ENOMEM;
517 }
518
519 dcdc->wm831x = wm831x;
520
521 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
522 if (res == NULL) {
523 dev_err(&pdev->dev, "No I/O resource\n");
524 ret = -EINVAL;
525 goto err;
526 }
527 dcdc->base = res->start;
528
529 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
530 dcdc->desc.name = dcdc->name;
531 dcdc->desc.id = id;
532 dcdc->desc.type = REGULATOR_VOLTAGE;
533 dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
534 dcdc->desc.ops = &wm831x_buckv_ops;
535 dcdc->desc.owner = THIS_MODULE;
536
Mark Browne24a04c2009-09-22 08:47:11 -0700537 ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
538 if (ret < 0) {
539 dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
540 goto err;
541 }
542 dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
543
544 ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
545 if (ret < 0) {
546 dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
547 goto err;
548 }
549 dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
550
551 if (pdata->dcdc[id])
552 wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);
553
Mark Browne4ee8312009-07-28 15:21:49 +0100554 dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
555 pdata->dcdc[id], dcdc);
556 if (IS_ERR(dcdc->regulator)) {
557 ret = PTR_ERR(dcdc->regulator);
558 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
559 id + 1, ret);
560 goto err;
561 }
562
563 irq = platform_get_irq_byname(pdev, "UV");
564 ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
565 IRQF_TRIGGER_RISING, dcdc->name,
566 dcdc);
567 if (ret != 0) {
568 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
569 irq, ret);
570 goto err_regulator;
571 }
572
573 irq = platform_get_irq_byname(pdev, "HC");
574 ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
575 IRQF_TRIGGER_RISING, dcdc->name,
576 dcdc);
577 if (ret != 0) {
578 dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
579 irq, ret);
580 goto err_uv;
581 }
582
583 platform_set_drvdata(pdev, dcdc);
584
585 return 0;
586
587err_uv:
588 wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
589err_regulator:
590 regulator_unregister(dcdc->regulator);
591err:
Mark Browne24a04c2009-09-22 08:47:11 -0700592 if (dcdc->dvs_gpio)
593 gpio_free(dcdc->dvs_gpio);
Mark Browne4ee8312009-07-28 15:21:49 +0100594 kfree(dcdc);
595 return ret;
596}
597
598static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
599{
600 struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
601 struct wm831x *wm831x = dcdc->wm831x;
602
603 wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
604 wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
605 regulator_unregister(dcdc->regulator);
Mark Browne24a04c2009-09-22 08:47:11 -0700606 if (dcdc->dvs_gpio)
607 gpio_free(dcdc->dvs_gpio);
Mark Browne4ee8312009-07-28 15:21:49 +0100608 kfree(dcdc);
609
610 return 0;
611}
612
613static struct platform_driver wm831x_buckv_driver = {
614 .probe = wm831x_buckv_probe,
615 .remove = __devexit_p(wm831x_buckv_remove),
616 .driver = {
617 .name = "wm831x-buckv",
618 },
619};
620
621/*
622 * BUCKP specifics
623 */
624
625static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
626 unsigned selector)
627{
628 if (selector <= WM831X_BUCKP_MAX_SELECTOR)
629 return 850000 + (selector * 25000);
630 else
631 return -EINVAL;
632}
633
634static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
635 int min_uV, int max_uV)
636{
637 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
638 struct wm831x *wm831x = dcdc->wm831x;
639 u16 vsel;
640
641 if (min_uV <= 34000000)
642 vsel = (min_uV - 850000) / 25000;
643 else
644 return -EINVAL;
645
646 if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
647 return -EINVAL;
648
649 return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
650}
651
652static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
653 int min_uV, int max_uV)
654{
655 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
656 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
657
658 return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV);
659}
660
661static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
662 int uV)
663{
664 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
665 u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
666
667 return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV);
668}
669
670static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
671{
672 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
673 struct wm831x *wm831x = dcdc->wm831x;
674 u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
675 int val;
676
677 val = wm831x_reg_read(wm831x, reg);
678 if (val < 0)
679 return val;
680
681 return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
682}
683
684static struct regulator_ops wm831x_buckp_ops = {
685 .set_voltage = wm831x_buckp_set_voltage,
686 .get_voltage = wm831x_buckp_get_voltage,
687 .list_voltage = wm831x_buckp_list_voltage,
688 .set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
689
690 .is_enabled = wm831x_dcdc_is_enabled,
691 .enable = wm831x_dcdc_enable,
692 .disable = wm831x_dcdc_disable,
693 .get_status = wm831x_dcdc_get_status,
694 .get_mode = wm831x_dcdc_get_mode,
695 .set_mode = wm831x_dcdc_set_mode,
696 .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
697};
698
699static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
700{
701 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
702 struct wm831x_pdata *pdata = wm831x->dev->platform_data;
703 int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
704 struct wm831x_dcdc *dcdc;
705 struct resource *res;
706 int ret, irq;
707
708 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
709
710 if (pdata == NULL || pdata->dcdc[id] == NULL)
711 return -ENODEV;
712
713 dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
714 if (dcdc == NULL) {
715 dev_err(&pdev->dev, "Unable to allocate private data\n");
716 return -ENOMEM;
717 }
718
719 dcdc->wm831x = wm831x;
720
721 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
722 if (res == NULL) {
723 dev_err(&pdev->dev, "No I/O resource\n");
724 ret = -EINVAL;
725 goto err;
726 }
727 dcdc->base = res->start;
728
729 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
730 dcdc->desc.name = dcdc->name;
731 dcdc->desc.id = id;
732 dcdc->desc.type = REGULATOR_VOLTAGE;
733 dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
734 dcdc->desc.ops = &wm831x_buckp_ops;
735 dcdc->desc.owner = THIS_MODULE;
736
737 dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
738 pdata->dcdc[id], dcdc);
739 if (IS_ERR(dcdc->regulator)) {
740 ret = PTR_ERR(dcdc->regulator);
741 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
742 id + 1, ret);
743 goto err;
744 }
745
746 irq = platform_get_irq_byname(pdev, "UV");
747 ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
748 IRQF_TRIGGER_RISING, dcdc->name,
749 dcdc);
750 if (ret != 0) {
751 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
752 irq, ret);
753 goto err_regulator;
754 }
755
756 platform_set_drvdata(pdev, dcdc);
757
758 return 0;
759
760err_regulator:
761 regulator_unregister(dcdc->regulator);
762err:
763 kfree(dcdc);
764 return ret;
765}
766
767static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
768{
769 struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
770 struct wm831x *wm831x = dcdc->wm831x;
771
772 wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
773 regulator_unregister(dcdc->regulator);
774 kfree(dcdc);
775
776 return 0;
777}
778
779static struct platform_driver wm831x_buckp_driver = {
780 .probe = wm831x_buckp_probe,
781 .remove = __devexit_p(wm831x_buckp_remove),
782 .driver = {
783 .name = "wm831x-buckp",
784 },
785};
786
Mark Brown8267a9b2009-07-28 15:22:23 +0100787/*
Mark Brown13048502009-07-28 15:23:16 +0100788 * DCDC boost convertors
789 */
790
791static int wm831x_boostp_get_status(struct regulator_dev *rdev)
792{
793 struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
794 struct wm831x *wm831x = dcdc->wm831x;
795 int ret;
796
797 /* First, check for errors */
798 ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
799 if (ret < 0)
800 return ret;
801
802 if (ret & (1 << rdev_get_id(rdev))) {
803 dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
804 rdev_get_id(rdev) + 1);
805 return REGULATOR_STATUS_ERROR;
806 }
807
808 /* Is the regulator on? */
809 ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
810 if (ret < 0)
811 return ret;
812 if (ret & (1 << rdev_get_id(rdev)))
813 return REGULATOR_STATUS_ON;
814 else
815 return REGULATOR_STATUS_OFF;
816}
817
818static struct regulator_ops wm831x_boostp_ops = {
819 .get_status = wm831x_boostp_get_status,
820
821 .is_enabled = wm831x_dcdc_is_enabled,
822 .enable = wm831x_dcdc_enable,
823 .disable = wm831x_dcdc_disable,
824};
825
826static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
827{
828 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
829 struct wm831x_pdata *pdata = wm831x->dev->platform_data;
830 int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
831 struct wm831x_dcdc *dcdc;
832 struct resource *res;
833 int ret, irq;
834
835 dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
836
837 if (pdata == NULL || pdata->dcdc[id] == NULL)
838 return -ENODEV;
839
840 dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
841 if (dcdc == NULL) {
842 dev_err(&pdev->dev, "Unable to allocate private data\n");
843 return -ENOMEM;
844 }
845
846 dcdc->wm831x = wm831x;
847
848 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
849 if (res == NULL) {
850 dev_err(&pdev->dev, "No I/O resource\n");
851 ret = -EINVAL;
852 goto err;
853 }
854 dcdc->base = res->start;
855
856 snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
857 dcdc->desc.name = dcdc->name;
858 dcdc->desc.id = id;
859 dcdc->desc.type = REGULATOR_VOLTAGE;
860 dcdc->desc.ops = &wm831x_boostp_ops;
861 dcdc->desc.owner = THIS_MODULE;
862
863 dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
864 pdata->dcdc[id], dcdc);
865 if (IS_ERR(dcdc->regulator)) {
866 ret = PTR_ERR(dcdc->regulator);
867 dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
868 id + 1, ret);
869 goto err;
870 }
871
872 irq = platform_get_irq_byname(pdev, "UV");
873 ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
874 IRQF_TRIGGER_RISING, dcdc->name,
875 dcdc);
876 if (ret != 0) {
877 dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
878 irq, ret);
879 goto err_regulator;
880 }
881
882 platform_set_drvdata(pdev, dcdc);
883
884 return 0;
885
886err_regulator:
887 regulator_unregister(dcdc->regulator);
888err:
889 kfree(dcdc);
890 return ret;
891}
892
893static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
894{
895 struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
896 struct wm831x *wm831x = dcdc->wm831x;
897
898 wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
899 regulator_unregister(dcdc->regulator);
900 kfree(dcdc);
901
902 return 0;
903}
904
905static struct platform_driver wm831x_boostp_driver = {
906 .probe = wm831x_boostp_probe,
907 .remove = __devexit_p(wm831x_boostp_remove),
908 .driver = {
909 .name = "wm831x-boostp",
910 },
911};
912
913/*
Mark Brown8267a9b2009-07-28 15:22:23 +0100914 * External Power Enable
915 *
916 * These aren't actually DCDCs but look like them in hardware so share
917 * code.
918 */
919
920#define WM831X_EPE_BASE 6
921
922static struct regulator_ops wm831x_epe_ops = {
923 .is_enabled = wm831x_dcdc_is_enabled,
924 .enable = wm831x_dcdc_enable,
925 .disable = wm831x_dcdc_disable,
926 .get_status = wm831x_dcdc_get_status,
927};
928
929static __devinit int wm831x_epe_probe(struct platform_device *pdev)
930{
931 struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
932 struct wm831x_pdata *pdata = wm831x->dev->platform_data;
933 int id = pdev->id % ARRAY_SIZE(pdata->epe);
934 struct wm831x_dcdc *dcdc;
935 int ret;
936
937 dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
938
939 if (pdata == NULL || pdata->epe[id] == NULL)
940 return -ENODEV;
941
942 dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
943 if (dcdc == NULL) {
944 dev_err(&pdev->dev, "Unable to allocate private data\n");
945 return -ENOMEM;
946 }
947
948 dcdc->wm831x = wm831x;
949
950 /* For current parts this is correct; probably need to revisit
951 * in future.
952 */
953 snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
954 dcdc->desc.name = dcdc->name;
955 dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
956 dcdc->desc.ops = &wm831x_epe_ops;
957 dcdc->desc.type = REGULATOR_VOLTAGE;
958 dcdc->desc.owner = THIS_MODULE;
959
960 dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
961 pdata->epe[id], dcdc);
962 if (IS_ERR(dcdc->regulator)) {
963 ret = PTR_ERR(dcdc->regulator);
964 dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
965 id + 1, ret);
966 goto err;
967 }
968
969 platform_set_drvdata(pdev, dcdc);
970
971 return 0;
972
973err:
974 kfree(dcdc);
975 return ret;
976}
977
978static __devexit int wm831x_epe_remove(struct platform_device *pdev)
979{
980 struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
981
982 regulator_unregister(dcdc->regulator);
983 kfree(dcdc);
984
985 return 0;
986}
987
988static struct platform_driver wm831x_epe_driver = {
989 .probe = wm831x_epe_probe,
990 .remove = __devexit_p(wm831x_epe_remove),
991 .driver = {
992 .name = "wm831x-epe",
993 },
994};
995
Mark Browne4ee8312009-07-28 15:21:49 +0100996static int __init wm831x_dcdc_init(void)
997{
998 int ret;
999 ret = platform_driver_register(&wm831x_buckv_driver);
1000 if (ret != 0)
1001 pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
1002
1003 ret = platform_driver_register(&wm831x_buckp_driver);
1004 if (ret != 0)
1005 pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
1006
Mark Brown13048502009-07-28 15:23:16 +01001007 ret = platform_driver_register(&wm831x_boostp_driver);
1008 if (ret != 0)
1009 pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
1010
Mark Brown8267a9b2009-07-28 15:22:23 +01001011 ret = platform_driver_register(&wm831x_epe_driver);
1012 if (ret != 0)
1013 pr_err("Failed to register WM831x EPE driver: %d\n", ret);
1014
Mark Browne4ee8312009-07-28 15:21:49 +01001015 return 0;
1016}
1017subsys_initcall(wm831x_dcdc_init);
1018
1019static void __exit wm831x_dcdc_exit(void)
1020{
Mark Brown8267a9b2009-07-28 15:22:23 +01001021 platform_driver_unregister(&wm831x_epe_driver);
Mark Brown13048502009-07-28 15:23:16 +01001022 platform_driver_unregister(&wm831x_boostp_driver);
Mark Browne4ee8312009-07-28 15:21:49 +01001023 platform_driver_unregister(&wm831x_buckp_driver);
1024 platform_driver_unregister(&wm831x_buckv_driver);
1025}
1026module_exit(wm831x_dcdc_exit);
1027
1028/* Module information */
1029MODULE_AUTHOR("Mark Brown");
1030MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
1031MODULE_LICENSE("GPL");
1032MODULE_ALIAS("platform:wm831x-buckv");
1033MODULE_ALIAS("platform:wm831x-buckp");