blob: e03e088be95f23eb2b01a1ab2915a22e47beb7dd [file] [log] [blame]
Sam Ravnborga439fe52008-07-27 23:00:59 +02001/*
2 * auxio.h: Definitions and code for the Auxiliary I/O register.
3 *
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5 */
6#ifndef _SPARC_AUXIO_H
7#define _SPARC_AUXIO_H
8
9#include <asm/system.h>
10#include <asm/vaddrs.h>
11
12/* This register is an unsigned char in IO space. It does two things.
13 * First, it is used to control the front panel LED light on machines
14 * that have it (good for testing entry points to trap handlers and irq's)
15 * Secondly, it controls various floppy drive parameters.
16 */
17#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */
18#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */
19#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */
20#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */
21#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */
22#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */
23#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */
24
25/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
26#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */
27
28/* Set the following to zero to eject the floppy. */
29#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */
30#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */
31
32#ifndef __ASSEMBLY__
33
34/*
35 * NOTE: these routines are implementation dependent--
36 * understand the hardware you are querying!
37 */
38extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
39extern unsigned char get_auxio(void); /* .../asm/floppy.h */
40
41/*
42 * The following routines are provided for driver-compatibility
43 * with sparc64 (primarily sunlance.c)
44 */
45
46#define AUXIO_LTE_ON 1
47#define AUXIO_LTE_OFF 0
48
49/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
50 *
51 * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
52 */
53#define auxio_set_lte(on) \
54do { \
55 if(on) { \
56 set_auxio(AUXIO_LINK_TEST, 0); \
57 } else { \
58 set_auxio(0, AUXIO_LINK_TEST); \
59 } \
60} while (0)
61
62#define AUXIO_LED_ON 1
63#define AUXIO_LED_OFF 0
64
65/* auxio_set_led - Set system front panel LED
66 *
67 * on - AUXIO_LED_ON or AUXIO_LED_OFF
68 */
69#define auxio_set_led(on) \
70do { \
71 if(on) { \
72 set_auxio(AUXIO_LED, 0); \
73 } else { \
74 set_auxio(0, AUXIO_LED); \
75 } \
76} while (0)
77
78#endif /* !(__ASSEMBLY__) */
79
80
81/* AUXIO2 (Power Off Control) */
82extern __volatile__ unsigned char * auxio_power_register;
83
84#define AUXIO_POWER_DETECT_FAILURE 32
85#define AUXIO_POWER_CLEAR_FAILURE 2
86#define AUXIO_POWER_OFF 1
87
88
89#endif /* !(_SPARC_AUXIO_H) */