blob: 6498469e93ac33390d7b2031c4a6781e9eb1c6cd [file] [log] [blame]
David Howellsb920de12008-02-08 04:19:31 -08001/* MN10300 on-board serial port module registers
2 *
3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public Licence
8 * as published by the Free Software Foundation; either version
9 * 2 of the Licence, or (at your option) any later version.
10 */
11
12#ifndef _ASM_SERIAL_REGS_H
13#define _ASM_SERIAL_REGS_H
14
15#include <asm/cpu-regs.h>
16#include <asm/intctl-regs.h>
17
18#ifdef __KERNEL__
19
20/* serial port 0 */
21#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
22#define SC01CTR_CK 0x0007 /* clock source select */
23#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
24#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
25#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
26#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
27#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
28#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
29#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
30#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
31#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
32#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
33#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
34#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
35#define SC01CTR_STB 0x0008 /* stop bit select */
36#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
37#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
38#define SC01CTR_PB 0x0070 /* parity bit select */
39#define SC01CTR_PB_NONE 0x0000 /* - no parity */
40#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
41#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
42#define SC01CTR_PB_EVEN 0x0060 /* - even parity */
43#define SC01CTR_PB_ODD 0x0070 /* - odd parity */
44#define SC01CTR_CLN 0x0080 /* character length */
45#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
46#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
47#define SC01CTR_TOE 0x0100 /* T input output enable */
48#define SC01CTR_OD 0x0200 /* bit order select */
49#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
50#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
51#define SC01CTR_MD 0x0c00 /* mode select */
52#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
53#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
54#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
55#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
56#define SC01CTR_IIC 0x1000 /* I2C mode select */
57#define SC01CTR_BKE 0x2000 /* break transmit enable */
58#define SC01CTR_RXE 0x4000 /* receive enable */
59#define SC01CTR_TXE 0x8000 /* transmit enable */
60
61#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
62#define SC01ICR_DMD 0x80 /* output data mode */
63#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
64#define SC01ICR_TI 0x10 /* transmit interrupt cause */
65#define SC01ICR_RES 0x04 /* receive error select */
66#define SC01ICR_RI 0x01 /* receive interrupt cause */
67
68#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
69#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
70
71#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
72#define SC01STR_OEF 0x0001 /* overrun error found */
73#define SC01STR_PEF 0x0002 /* parity error found */
74#define SC01STR_FEF 0x0004 /* framing error found */
75#define SC01STR_RBF 0x0010 /* receive buffer status */
76#define SC01STR_TBF 0x0020 /* transmit buffer status */
77#define SC01STR_RXF 0x0040 /* receive status */
78#define SC01STR_TXF 0x0080 /* transmit status */
79#define SC01STR_STF 0x0100 /* I2C start sequence found */
80#define SC01STR_SPF 0x0200 /* I2C stop sequence found */
81
82#define SC0RXIRQ 20 /* timer 0 Receive IRQ */
83#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
84
85#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
86#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
87
88/* serial port 1 */
89#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
90#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
91#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
92#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
93#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
94
95#define SC1RXIRQ 22 /* timer 1 Receive IRQ */
96#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
97
98#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
99#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
100
101/* serial port 2 */
102#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
103#define SC2CTR_CK 0x0003 /* clock source select */
104#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
105#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
106#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
107#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
108#define SC2CTR_STB 0x0008 /* stop bit select */
109#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
110#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
111#define SC2CTR_PB 0x0070 /* parity bit select */
112#define SC2CTR_PB_NONE 0x0000 /* - no parity */
113#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
114#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
115#define SC2CTR_PB_EVEN 0x0060 /* - even parity */
116#define SC2CTR_PB_ODD 0x0070 /* - odd parity */
117#define SC2CTR_CLN 0x0080 /* character length */
118#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
119#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
120#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
121#define SC2CTR_OD 0x0200 /* bit order select */
122#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
123#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
124#define SC2CTR_TWS 0x1000 /* transmit wait select */
125#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
126#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
127#define SC2CTR_BKE 0x2000 /* break transmit enable */
128#define SC2CTR_RXE 0x4000 /* receive enable */
129#define SC2CTR_TXE 0x8000 /* transmit enable */
130
131#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
132#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
133#define SC2ICR_TI 0x10 /* transmit interrupt cause */
134#define SC2ICR_RES 0x04 /* receive error select */
135#define SC2ICR_RI 0x01 /* receive interrupt cause */
136
137#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
138#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
139#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
140#define SC2STR_OEF 0x0001 /* overrun error found */
141#define SC2STR_PEF 0x0002 /* parity error found */
142#define SC2STR_FEF 0x0004 /* framing error found */
143#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
144#define SC2STR_RBF 0x0010 /* receive buffer status */
145#define SC2STR_TBF 0x0020 /* transmit buffer status */
146#define SC2STR_RXF 0x0040 /* receive status */
147#define SC2STR_TXF 0x0080 /* transmit status */
148
149#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
150
151#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
152#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
153
154#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
155#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
156
157
158#endif /* __KERNEL__ */
159
160#endif /* _ASM_SERIAL_REGS_H */