Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 1 | /* |
| 2 | * QLogic iSCSI HBA Driver |
Vikas Chaudhary | 4a4f51e | 2013-08-16 07:03:04 -0400 | [diff] [blame] | 3 | * Copyright (c) 2011-2013 QLogic Corporation |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 4 | * |
| 5 | * See LICENSE.qla4xxx for copyright and licensing details. |
| 6 | */ |
| 7 | |
| 8 | #include "ql4_def.h" |
| 9 | #include "ql4_glbl.h" |
| 10 | #include "ql4_bsg.h" |
| 11 | |
| 12 | static int |
| 13 | qla4xxx_read_flash(struct bsg_job *bsg_job) |
| 14 | { |
| 15 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 16 | struct scsi_qla_host *ha = to_qla_host(host); |
| 17 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 18 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 19 | uint32_t offset = 0; |
| 20 | uint32_t length = 0; |
| 21 | dma_addr_t flash_dma; |
| 22 | uint8_t *flash = NULL; |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 23 | int rval = -EINVAL; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 24 | |
| 25 | bsg_reply->reply_payload_rcv_len = 0; |
| 26 | |
| 27 | if (unlikely(pci_channel_offline(ha->pdev))) |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 28 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 29 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 30 | if (ql4xxx_reset_active(ha)) { |
| 31 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 32 | rval = -EBUSY; |
| 33 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 34 | } |
| 35 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 36 | if (ha->flash_state != QLFLASH_WAITING) { |
| 37 | ql4_printk(KERN_ERR, ha, "%s: another flash operation " |
| 38 | "active\n", __func__); |
| 39 | rval = -EBUSY; |
| 40 | goto leave; |
| 41 | } |
| 42 | |
| 43 | ha->flash_state = QLFLASH_READING; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 44 | offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 45 | length = bsg_job->reply_payload.payload_len; |
| 46 | |
| 47 | flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, |
| 48 | GFP_KERNEL); |
| 49 | if (!flash) { |
| 50 | ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| 51 | "data\n", __func__); |
| 52 | rval = -ENOMEM; |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 53 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 54 | } |
| 55 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 56 | rval = qla4xxx_get_flash(ha, flash_dma, offset, length); |
| 57 | if (rval) { |
| 58 | ql4_printk(KERN_ERR, ha, "%s: get flash failed\n", __func__); |
| 59 | bsg_reply->result = DID_ERROR << 16; |
| 60 | rval = -EIO; |
| 61 | } else { |
| 62 | bsg_reply->reply_payload_rcv_len = |
| 63 | sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| 64 | bsg_job->reply_payload.sg_cnt, |
| 65 | flash, length); |
| 66 | bsg_reply->result = DID_OK << 16; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 67 | } |
| 68 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 69 | bsg_job_done(bsg_job, bsg_reply->result, |
| 70 | bsg_reply->reply_payload_rcv_len); |
| 71 | dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); |
| 72 | leave: |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 73 | ha->flash_state = QLFLASH_WAITING; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 74 | return rval; |
| 75 | } |
| 76 | |
| 77 | static int |
| 78 | qla4xxx_update_flash(struct bsg_job *bsg_job) |
| 79 | { |
| 80 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 81 | struct scsi_qla_host *ha = to_qla_host(host); |
| 82 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 83 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 84 | uint32_t length = 0; |
| 85 | uint32_t offset = 0; |
| 86 | uint32_t options = 0; |
| 87 | dma_addr_t flash_dma; |
| 88 | uint8_t *flash = NULL; |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 89 | int rval = -EINVAL; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 90 | |
| 91 | bsg_reply->reply_payload_rcv_len = 0; |
| 92 | |
| 93 | if (unlikely(pci_channel_offline(ha->pdev))) |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 94 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 95 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 96 | if (ql4xxx_reset_active(ha)) { |
| 97 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 98 | rval = -EBUSY; |
| 99 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 100 | } |
| 101 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 102 | if (ha->flash_state != QLFLASH_WAITING) { |
| 103 | ql4_printk(KERN_ERR, ha, "%s: another flash operation " |
| 104 | "active\n", __func__); |
| 105 | rval = -EBUSY; |
| 106 | goto leave; |
| 107 | } |
| 108 | |
| 109 | ha->flash_state = QLFLASH_WRITING; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 110 | length = bsg_job->request_payload.payload_len; |
| 111 | offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 112 | options = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| 113 | |
| 114 | flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, |
| 115 | GFP_KERNEL); |
| 116 | if (!flash) { |
| 117 | ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| 118 | "data\n", __func__); |
| 119 | rval = -ENOMEM; |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 120 | goto leave; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 121 | } |
| 122 | |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 123 | sg_copy_to_buffer(bsg_job->request_payload.sg_list, |
| 124 | bsg_job->request_payload.sg_cnt, flash, length); |
| 125 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 126 | rval = qla4xxx_set_flash(ha, flash_dma, offset, length, options); |
| 127 | if (rval) { |
| 128 | ql4_printk(KERN_ERR, ha, "%s: set flash failed\n", __func__); |
| 129 | bsg_reply->result = DID_ERROR << 16; |
| 130 | rval = -EIO; |
| 131 | } else |
| 132 | bsg_reply->result = DID_OK << 16; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 133 | |
Harish Zunjarrao | ef7830b | 2011-08-01 03:26:14 -0700 | [diff] [blame] | 134 | bsg_job_done(bsg_job, bsg_reply->result, |
| 135 | bsg_reply->reply_payload_rcv_len); |
| 136 | dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); |
| 137 | leave: |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 138 | ha->flash_state = QLFLASH_WAITING; |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 139 | return rval; |
| 140 | } |
| 141 | |
Harish Zunjarrao | 8b0402e | 2011-08-01 03:26:15 -0700 | [diff] [blame] | 142 | static int |
| 143 | qla4xxx_get_acb_state(struct bsg_job *bsg_job) |
| 144 | { |
| 145 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 146 | struct scsi_qla_host *ha = to_qla_host(host); |
| 147 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 148 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 149 | uint32_t status[MBOX_REG_COUNT]; |
| 150 | uint32_t acb_idx; |
| 151 | uint32_t ip_idx; |
| 152 | int rval = -EINVAL; |
| 153 | |
| 154 | bsg_reply->reply_payload_rcv_len = 0; |
| 155 | |
| 156 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 157 | goto leave; |
| 158 | |
| 159 | /* Only 4022 and above adapters are supported */ |
| 160 | if (is_qla4010(ha)) |
| 161 | goto leave; |
| 162 | |
| 163 | if (ql4xxx_reset_active(ha)) { |
| 164 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 165 | rval = -EBUSY; |
| 166 | goto leave; |
| 167 | } |
| 168 | |
| 169 | if (bsg_job->reply_payload.payload_len < sizeof(status)) { |
| 170 | ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n", |
| 171 | __func__, bsg_job->reply_payload.payload_len); |
| 172 | rval = -EINVAL; |
| 173 | goto leave; |
| 174 | } |
| 175 | |
| 176 | acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 177 | ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| 178 | |
| 179 | rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status); |
| 180 | if (rval) { |
| 181 | ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n", |
| 182 | __func__); |
| 183 | bsg_reply->result = DID_ERROR << 16; |
| 184 | rval = -EIO; |
| 185 | } else { |
| 186 | bsg_reply->reply_payload_rcv_len = |
| 187 | sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| 188 | bsg_job->reply_payload.sg_cnt, |
| 189 | status, sizeof(status)); |
| 190 | bsg_reply->result = DID_OK << 16; |
| 191 | } |
| 192 | |
| 193 | bsg_job_done(bsg_job, bsg_reply->result, |
| 194 | bsg_reply->reply_payload_rcv_len); |
| 195 | leave: |
| 196 | return rval; |
| 197 | } |
| 198 | |
Harish Zunjarrao | 7c07d13 | 2011-08-01 03:26:16 -0700 | [diff] [blame] | 199 | static int |
| 200 | qla4xxx_read_nvram(struct bsg_job *bsg_job) |
| 201 | { |
| 202 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 203 | struct scsi_qla_host *ha = to_qla_host(host); |
| 204 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 205 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 206 | uint32_t offset = 0; |
| 207 | uint32_t len = 0; |
| 208 | uint32_t total_len = 0; |
| 209 | dma_addr_t nvram_dma; |
| 210 | uint8_t *nvram = NULL; |
| 211 | int rval = -EINVAL; |
| 212 | |
| 213 | bsg_reply->reply_payload_rcv_len = 0; |
| 214 | |
| 215 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 216 | goto leave; |
| 217 | |
| 218 | /* Only 40xx adapters are supported */ |
| 219 | if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) |
| 220 | goto leave; |
| 221 | |
| 222 | if (ql4xxx_reset_active(ha)) { |
| 223 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 224 | rval = -EBUSY; |
| 225 | goto leave; |
| 226 | } |
| 227 | |
| 228 | offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 229 | len = bsg_job->reply_payload.payload_len; |
| 230 | total_len = offset + len; |
| 231 | |
| 232 | /* total len should not be greater than max NVRAM size */ |
| 233 | if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || |
| 234 | ((is_qla4022(ha) || is_qla4032(ha)) && |
| 235 | total_len > QL40X2_NVRAM_SIZE)) { |
| 236 | ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" |
| 237 | " nvram size, offset=%d len=%d\n", |
| 238 | __func__, offset, len); |
| 239 | goto leave; |
| 240 | } |
| 241 | |
| 242 | nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, |
| 243 | GFP_KERNEL); |
| 244 | if (!nvram) { |
| 245 | ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram " |
| 246 | "data\n", __func__); |
| 247 | rval = -ENOMEM; |
| 248 | goto leave; |
| 249 | } |
| 250 | |
| 251 | rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len); |
| 252 | if (rval) { |
| 253 | ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__); |
| 254 | bsg_reply->result = DID_ERROR << 16; |
| 255 | rval = -EIO; |
| 256 | } else { |
| 257 | bsg_reply->reply_payload_rcv_len = |
| 258 | sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| 259 | bsg_job->reply_payload.sg_cnt, |
| 260 | nvram, len); |
| 261 | bsg_reply->result = DID_OK << 16; |
| 262 | } |
| 263 | |
| 264 | bsg_job_done(bsg_job, bsg_reply->result, |
| 265 | bsg_reply->reply_payload_rcv_len); |
| 266 | dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); |
| 267 | leave: |
| 268 | return rval; |
| 269 | } |
| 270 | |
| 271 | static int |
| 272 | qla4xxx_update_nvram(struct bsg_job *bsg_job) |
| 273 | { |
| 274 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 275 | struct scsi_qla_host *ha = to_qla_host(host); |
| 276 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 277 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 278 | uint32_t offset = 0; |
| 279 | uint32_t len = 0; |
| 280 | uint32_t total_len = 0; |
| 281 | dma_addr_t nvram_dma; |
| 282 | uint8_t *nvram = NULL; |
| 283 | int rval = -EINVAL; |
| 284 | |
| 285 | bsg_reply->reply_payload_rcv_len = 0; |
| 286 | |
| 287 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 288 | goto leave; |
| 289 | |
| 290 | if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) |
| 291 | goto leave; |
| 292 | |
| 293 | if (ql4xxx_reset_active(ha)) { |
| 294 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 295 | rval = -EBUSY; |
| 296 | goto leave; |
| 297 | } |
| 298 | |
| 299 | offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 300 | len = bsg_job->request_payload.payload_len; |
| 301 | total_len = offset + len; |
| 302 | |
| 303 | /* total len should not be greater than max NVRAM size */ |
| 304 | if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || |
| 305 | ((is_qla4022(ha) || is_qla4032(ha)) && |
| 306 | total_len > QL40X2_NVRAM_SIZE)) { |
| 307 | ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" |
| 308 | " nvram size, offset=%d len=%d\n", |
| 309 | __func__, offset, len); |
| 310 | goto leave; |
| 311 | } |
| 312 | |
| 313 | nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, |
| 314 | GFP_KERNEL); |
| 315 | if (!nvram) { |
| 316 | ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| 317 | "data\n", __func__); |
| 318 | rval = -ENOMEM; |
| 319 | goto leave; |
| 320 | } |
| 321 | |
| 322 | sg_copy_to_buffer(bsg_job->request_payload.sg_list, |
| 323 | bsg_job->request_payload.sg_cnt, nvram, len); |
| 324 | |
| 325 | rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len); |
| 326 | if (rval) { |
| 327 | ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); |
| 328 | bsg_reply->result = DID_ERROR << 16; |
| 329 | rval = -EIO; |
| 330 | } else |
| 331 | bsg_reply->result = DID_OK << 16; |
| 332 | |
| 333 | bsg_job_done(bsg_job, bsg_reply->result, |
| 334 | bsg_reply->reply_payload_rcv_len); |
| 335 | dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); |
| 336 | leave: |
| 337 | return rval; |
| 338 | } |
| 339 | |
Harish Zunjarrao | 5232f80 | 2011-08-12 02:51:26 -0700 | [diff] [blame] | 340 | static int |
| 341 | qla4xxx_restore_defaults(struct bsg_job *bsg_job) |
| 342 | { |
| 343 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 344 | struct scsi_qla_host *ha = to_qla_host(host); |
| 345 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 346 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 347 | uint32_t region = 0; |
| 348 | uint32_t field0 = 0; |
| 349 | uint32_t field1 = 0; |
| 350 | int rval = -EINVAL; |
| 351 | |
| 352 | bsg_reply->reply_payload_rcv_len = 0; |
| 353 | |
| 354 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 355 | goto leave; |
| 356 | |
| 357 | if (is_qla4010(ha)) |
| 358 | goto leave; |
| 359 | |
| 360 | if (ql4xxx_reset_active(ha)) { |
| 361 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 362 | rval = -EBUSY; |
| 363 | goto leave; |
| 364 | } |
| 365 | |
| 366 | region = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 367 | field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| 368 | field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3]; |
| 369 | |
| 370 | rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1); |
| 371 | if (rval) { |
| 372 | ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); |
| 373 | bsg_reply->result = DID_ERROR << 16; |
| 374 | rval = -EIO; |
| 375 | } else |
| 376 | bsg_reply->result = DID_OK << 16; |
| 377 | |
| 378 | bsg_job_done(bsg_job, bsg_reply->result, |
| 379 | bsg_reply->reply_payload_rcv_len); |
| 380 | leave: |
| 381 | return rval; |
| 382 | } |
| 383 | |
Harish Zunjarrao | 6085491 | 2011-08-12 02:51:27 -0700 | [diff] [blame] | 384 | static int |
| 385 | qla4xxx_bsg_get_acb(struct bsg_job *bsg_job) |
| 386 | { |
| 387 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 388 | struct scsi_qla_host *ha = to_qla_host(host); |
| 389 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 390 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 391 | uint32_t acb_type = 0; |
| 392 | uint32_t len = 0; |
| 393 | dma_addr_t acb_dma; |
| 394 | uint8_t *acb = NULL; |
| 395 | int rval = -EINVAL; |
| 396 | |
| 397 | bsg_reply->reply_payload_rcv_len = 0; |
| 398 | |
| 399 | if (unlikely(pci_channel_offline(ha->pdev))) |
| 400 | goto leave; |
| 401 | |
| 402 | /* Only 4022 and above adapters are supported */ |
| 403 | if (is_qla4010(ha)) |
| 404 | goto leave; |
| 405 | |
| 406 | if (ql4xxx_reset_active(ha)) { |
| 407 | ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| 408 | rval = -EBUSY; |
| 409 | goto leave; |
| 410 | } |
| 411 | |
| 412 | acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 413 | len = bsg_job->reply_payload.payload_len; |
| 414 | if (len < sizeof(struct addr_ctrl_blk)) { |
| 415 | ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n", |
| 416 | __func__, len); |
| 417 | rval = -EINVAL; |
| 418 | goto leave; |
| 419 | } |
| 420 | |
| 421 | acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL); |
| 422 | if (!acb) { |
| 423 | ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb " |
| 424 | "data\n", __func__); |
| 425 | rval = -ENOMEM; |
| 426 | goto leave; |
| 427 | } |
| 428 | |
| 429 | rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len); |
| 430 | if (rval) { |
| 431 | ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__); |
| 432 | bsg_reply->result = DID_ERROR << 16; |
| 433 | rval = -EIO; |
| 434 | } else { |
| 435 | bsg_reply->reply_payload_rcv_len = |
| 436 | sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| 437 | bsg_job->reply_payload.sg_cnt, |
| 438 | acb, len); |
| 439 | bsg_reply->result = DID_OK << 16; |
| 440 | } |
| 441 | |
| 442 | bsg_job_done(bsg_job, bsg_reply->result, |
| 443 | bsg_reply->reply_payload_rcv_len); |
| 444 | dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma); |
| 445 | leave: |
| 446 | return rval; |
| 447 | } |
| 448 | |
Vikas Chaudhary | df86f77 | 2013-11-22 05:28:17 -0500 | [diff] [blame] | 449 | static void ql4xxx_execute_diag_cmd(struct bsg_job *bsg_job) |
| 450 | { |
| 451 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 452 | struct scsi_qla_host *ha = to_qla_host(host); |
| 453 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 454 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 455 | uint8_t *rsp_ptr = NULL; |
| 456 | uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| 457 | uint32_t mbox_sts[MBOX_REG_COUNT]; |
| 458 | int status = QLA_ERROR; |
| 459 | |
| 460 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| 461 | |
| 462 | if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { |
| 463 | ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", |
| 464 | __func__); |
| 465 | bsg_reply->result = DID_ERROR << 16; |
| 466 | goto exit_diag_mem_test; |
| 467 | } |
| 468 | |
| 469 | bsg_reply->reply_payload_rcv_len = 0; |
| 470 | memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], |
| 471 | sizeof(uint32_t) * MBOX_REG_COUNT); |
| 472 | |
| 473 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 474 | "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| 475 | __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], |
| 476 | mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], |
| 477 | mbox_cmd[7])); |
| 478 | |
| 479 | status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], |
| 480 | &mbox_sts[0]); |
| 481 | |
| 482 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 483 | "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| 484 | __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], |
| 485 | mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], |
| 486 | mbox_sts[7])); |
| 487 | |
| 488 | if (status == QLA_SUCCESS) |
| 489 | bsg_reply->result = DID_OK << 16; |
| 490 | else |
| 491 | bsg_reply->result = DID_ERROR << 16; |
| 492 | |
| 493 | /* Send mbox_sts to application */ |
| 494 | bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); |
| 495 | rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); |
| 496 | memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); |
| 497 | |
| 498 | exit_diag_mem_test: |
| 499 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 500 | "%s: bsg_reply->result = x%x, status = %s\n", |
| 501 | __func__, bsg_reply->result, STATUS(status))); |
| 502 | |
| 503 | bsg_job_done(bsg_job, bsg_reply->result, |
| 504 | bsg_reply->reply_payload_rcv_len); |
| 505 | } |
| 506 | |
| 507 | static int qla4_83xx_wait_for_loopback_config_comp(struct scsi_qla_host *ha, |
| 508 | int wait_for_link) |
| 509 | { |
| 510 | int status = QLA_SUCCESS; |
| 511 | |
| 512 | if (!wait_for_completion_timeout(&ha->idc_comp, (IDC_COMP_TOV * HZ))) { |
| 513 | ql4_printk(KERN_INFO, ha, "%s: IDC Complete notification not received, Waiting for another %d timeout", |
| 514 | __func__, ha->idc_extend_tmo); |
| 515 | if (ha->idc_extend_tmo) { |
| 516 | if (!wait_for_completion_timeout(&ha->idc_comp, |
| 517 | (ha->idc_extend_tmo * HZ))) { |
| 518 | ha->notify_idc_comp = 0; |
| 519 | ha->notify_link_up_comp = 0; |
Nilesh Javali | 56ccb98 | 2013-12-16 06:49:35 -0500 | [diff] [blame] | 520 | ql4_printk(KERN_WARNING, ha, "%s: Aborting: IDC Complete notification not received", |
Vikas Chaudhary | df86f77 | 2013-11-22 05:28:17 -0500 | [diff] [blame] | 521 | __func__); |
| 522 | status = QLA_ERROR; |
| 523 | goto exit_wait; |
| 524 | } else { |
| 525 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 526 | "%s: IDC Complete notification received\n", |
| 527 | __func__)); |
| 528 | } |
| 529 | } |
| 530 | } else { |
| 531 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 532 | "%s: IDC Complete notification received\n", |
| 533 | __func__)); |
| 534 | } |
| 535 | ha->notify_idc_comp = 0; |
| 536 | |
| 537 | if (wait_for_link) { |
| 538 | if (!wait_for_completion_timeout(&ha->link_up_comp, |
| 539 | (IDC_COMP_TOV * HZ))) { |
| 540 | ha->notify_link_up_comp = 0; |
Nilesh Javali | 56ccb98 | 2013-12-16 06:49:35 -0500 | [diff] [blame] | 541 | ql4_printk(KERN_WARNING, ha, "%s: Aborting: LINK UP notification not received", |
Vikas Chaudhary | df86f77 | 2013-11-22 05:28:17 -0500 | [diff] [blame] | 542 | __func__); |
| 543 | status = QLA_ERROR; |
| 544 | goto exit_wait; |
| 545 | } else { |
| 546 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 547 | "%s: LINK UP notification received\n", |
| 548 | __func__)); |
| 549 | } |
| 550 | ha->notify_link_up_comp = 0; |
| 551 | } |
| 552 | |
| 553 | exit_wait: |
| 554 | return status; |
| 555 | } |
| 556 | |
| 557 | static int qla4_83xx_pre_loopback_config(struct scsi_qla_host *ha, |
| 558 | uint32_t *mbox_cmd) |
| 559 | { |
| 560 | uint32_t config = 0; |
| 561 | int status = QLA_SUCCESS; |
| 562 | |
| 563 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| 564 | |
| 565 | status = qla4_83xx_get_port_config(ha, &config); |
| 566 | if (status != QLA_SUCCESS) |
| 567 | goto exit_pre_loopback_config; |
| 568 | |
| 569 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n", |
| 570 | __func__, config)); |
| 571 | |
| 572 | if ((config & ENABLE_INTERNAL_LOOPBACK) || |
| 573 | (config & ENABLE_EXTERNAL_LOOPBACK)) { |
| 574 | ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid requiest\n", |
| 575 | __func__); |
| 576 | goto exit_pre_loopback_config; |
| 577 | } |
| 578 | |
| 579 | if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) |
| 580 | config |= ENABLE_INTERNAL_LOOPBACK; |
| 581 | |
| 582 | if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) |
| 583 | config |= ENABLE_EXTERNAL_LOOPBACK; |
| 584 | |
| 585 | config &= ~ENABLE_DCBX; |
| 586 | |
| 587 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n", |
| 588 | __func__, config)); |
| 589 | |
| 590 | ha->notify_idc_comp = 1; |
| 591 | ha->notify_link_up_comp = 1; |
| 592 | |
| 593 | /* get the link state */ |
| 594 | qla4xxx_get_firmware_state(ha); |
| 595 | |
| 596 | status = qla4_83xx_set_port_config(ha, &config); |
| 597 | if (status != QLA_SUCCESS) { |
| 598 | ha->notify_idc_comp = 0; |
| 599 | ha->notify_link_up_comp = 0; |
| 600 | goto exit_pre_loopback_config; |
| 601 | } |
| 602 | exit_pre_loopback_config: |
| 603 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, |
| 604 | STATUS(status))); |
| 605 | return status; |
| 606 | } |
| 607 | |
| 608 | static int qla4_83xx_post_loopback_config(struct scsi_qla_host *ha, |
| 609 | uint32_t *mbox_cmd) |
| 610 | { |
| 611 | int status = QLA_SUCCESS; |
| 612 | uint32_t config = 0; |
| 613 | |
| 614 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| 615 | |
| 616 | status = qla4_83xx_get_port_config(ha, &config); |
| 617 | if (status != QLA_SUCCESS) |
| 618 | goto exit_post_loopback_config; |
| 619 | |
| 620 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__, |
| 621 | config)); |
| 622 | |
| 623 | if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) |
| 624 | config &= ~ENABLE_INTERNAL_LOOPBACK; |
| 625 | else if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) |
| 626 | config &= ~ENABLE_EXTERNAL_LOOPBACK; |
| 627 | |
| 628 | config |= ENABLE_DCBX; |
| 629 | |
| 630 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 631 | "%s: Restore default port config=%08X\n", __func__, |
| 632 | config)); |
| 633 | |
| 634 | ha->notify_idc_comp = 1; |
| 635 | if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) |
| 636 | ha->notify_link_up_comp = 1; |
| 637 | |
| 638 | status = qla4_83xx_set_port_config(ha, &config); |
| 639 | if (status != QLA_SUCCESS) { |
| 640 | ql4_printk(KERN_INFO, ha, "%s: Scheduling adapter reset\n", |
| 641 | __func__); |
| 642 | set_bit(DPC_RESET_HA, &ha->dpc_flags); |
| 643 | clear_bit(AF_LOOPBACK, &ha->flags); |
| 644 | goto exit_post_loopback_config; |
| 645 | } |
| 646 | |
| 647 | exit_post_loopback_config: |
| 648 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, |
| 649 | STATUS(status))); |
| 650 | return status; |
| 651 | } |
| 652 | |
| 653 | static void qla4xxx_execute_diag_loopback_cmd(struct bsg_job *bsg_job) |
| 654 | { |
| 655 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 656 | struct scsi_qla_host *ha = to_qla_host(host); |
| 657 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 658 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 659 | uint8_t *rsp_ptr = NULL; |
| 660 | uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| 661 | uint32_t mbox_sts[MBOX_REG_COUNT]; |
| 662 | int wait_for_link = 1; |
| 663 | int status = QLA_ERROR; |
| 664 | |
| 665 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| 666 | |
| 667 | bsg_reply->reply_payload_rcv_len = 0; |
| 668 | |
| 669 | if (test_bit(AF_LOOPBACK, &ha->flags)) { |
| 670 | ql4_printk(KERN_INFO, ha, "%s: Loopback Diagnostics already in progress. Invalid Request\n", |
| 671 | __func__); |
| 672 | bsg_reply->result = DID_ERROR << 16; |
| 673 | goto exit_loopback_cmd; |
| 674 | } |
| 675 | |
| 676 | if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { |
| 677 | ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", |
| 678 | __func__); |
| 679 | bsg_reply->result = DID_ERROR << 16; |
| 680 | goto exit_loopback_cmd; |
| 681 | } |
| 682 | |
| 683 | memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], |
| 684 | sizeof(uint32_t) * MBOX_REG_COUNT); |
| 685 | |
| 686 | if (is_qla8032(ha) || is_qla8042(ha)) { |
| 687 | status = qla4_83xx_pre_loopback_config(ha, mbox_cmd); |
| 688 | if (status != QLA_SUCCESS) { |
| 689 | bsg_reply->result = DID_ERROR << 16; |
| 690 | goto exit_loopback_cmd; |
| 691 | } |
| 692 | |
| 693 | status = qla4_83xx_wait_for_loopback_config_comp(ha, |
| 694 | wait_for_link); |
| 695 | if (status != QLA_SUCCESS) { |
| 696 | bsg_reply->result = DID_TIME_OUT << 16; |
| 697 | goto restore; |
| 698 | } |
| 699 | } |
| 700 | |
| 701 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 702 | "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| 703 | __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], |
| 704 | mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], |
| 705 | mbox_cmd[7])); |
| 706 | |
| 707 | status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], |
| 708 | &mbox_sts[0]); |
| 709 | |
| 710 | if (status == QLA_SUCCESS) |
| 711 | bsg_reply->result = DID_OK << 16; |
| 712 | else |
| 713 | bsg_reply->result = DID_ERROR << 16; |
| 714 | |
| 715 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 716 | "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| 717 | __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], |
| 718 | mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], |
| 719 | mbox_sts[7])); |
| 720 | |
| 721 | /* Send mbox_sts to application */ |
| 722 | bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); |
| 723 | rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); |
| 724 | memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); |
| 725 | restore: |
| 726 | if (is_qla8032(ha) || is_qla8042(ha)) { |
| 727 | status = qla4_83xx_post_loopback_config(ha, mbox_cmd); |
| 728 | if (status != QLA_SUCCESS) { |
| 729 | bsg_reply->result = DID_ERROR << 16; |
| 730 | goto exit_loopback_cmd; |
| 731 | } |
| 732 | |
| 733 | /* for pre_loopback_config() wait for LINK UP only |
| 734 | * if PHY LINK is UP */ |
| 735 | if (!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP)) |
| 736 | wait_for_link = 0; |
| 737 | |
| 738 | status = qla4_83xx_wait_for_loopback_config_comp(ha, |
| 739 | wait_for_link); |
| 740 | if (status != QLA_SUCCESS) { |
| 741 | bsg_reply->result = DID_TIME_OUT << 16; |
| 742 | goto exit_loopback_cmd; |
| 743 | } |
| 744 | } |
| 745 | exit_loopback_cmd: |
| 746 | DEBUG2(ql4_printk(KERN_INFO, ha, |
| 747 | "%s: bsg_reply->result = x%x, status = %s\n", |
| 748 | __func__, bsg_reply->result, STATUS(status))); |
| 749 | bsg_job_done(bsg_job, bsg_reply->result, |
| 750 | bsg_reply->reply_payload_rcv_len); |
| 751 | } |
| 752 | |
| 753 | static int qla4xxx_execute_diag_test(struct bsg_job *bsg_job) |
| 754 | { |
| 755 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 756 | struct scsi_qla_host *ha = to_qla_host(host); |
| 757 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 758 | uint32_t diag_cmd; |
| 759 | int rval = -EINVAL; |
| 760 | |
| 761 | DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| 762 | |
| 763 | diag_cmd = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| 764 | if (diag_cmd == MBOX_CMD_DIAG_TEST) { |
| 765 | switch (bsg_req->rqst_data.h_vendor.vendor_cmd[2]) { |
| 766 | case QL_DIAG_CMD_TEST_DDR_SIZE: |
| 767 | case QL_DIAG_CMD_TEST_DDR_RW: |
| 768 | case QL_DIAG_CMD_TEST_ONCHIP_MEM_RW: |
| 769 | case QL_DIAG_CMD_TEST_NVRAM: |
| 770 | case QL_DIAG_CMD_TEST_FLASH_ROM: |
| 771 | case QL_DIAG_CMD_TEST_DMA_XFER: |
| 772 | case QL_DIAG_CMD_SELF_DDR_RW: |
| 773 | case QL_DIAG_CMD_SELF_ONCHIP_MEM_RW: |
| 774 | /* Execute diag test for adapter RAM/FLASH */ |
| 775 | ql4xxx_execute_diag_cmd(bsg_job); |
| 776 | /* Always return success as we want to sent bsg_reply |
| 777 | * to Application */ |
| 778 | rval = QLA_SUCCESS; |
| 779 | break; |
| 780 | |
| 781 | case QL_DIAG_CMD_TEST_INT_LOOPBACK: |
| 782 | case QL_DIAG_CMD_TEST_EXT_LOOPBACK: |
| 783 | /* Execute diag test for Network */ |
| 784 | qla4xxx_execute_diag_loopback_cmd(bsg_job); |
| 785 | /* Always return success as we want to sent bsg_reply |
| 786 | * to Application */ |
| 787 | rval = QLA_SUCCESS; |
| 788 | break; |
| 789 | default: |
| 790 | ql4_printk(KERN_ERR, ha, "%s: Invalid diag test: 0x%x\n", |
| 791 | __func__, |
| 792 | bsg_req->rqst_data.h_vendor.vendor_cmd[2]); |
| 793 | } |
| 794 | } else if ((diag_cmd == MBOX_CMD_SET_LED_CONFIG) || |
| 795 | (diag_cmd == MBOX_CMD_GET_LED_CONFIG)) { |
| 796 | ql4xxx_execute_diag_cmd(bsg_job); |
| 797 | rval = QLA_SUCCESS; |
| 798 | } else { |
| 799 | ql4_printk(KERN_ERR, ha, "%s: Invalid diag cmd: 0x%x\n", |
| 800 | __func__, diag_cmd); |
| 801 | } |
| 802 | |
| 803 | return rval; |
| 804 | } |
| 805 | |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 806 | /** |
| 807 | * qla4xxx_process_vendor_specific - handle vendor specific bsg request |
| 808 | * @job: iscsi_bsg_job to handle |
| 809 | **/ |
| 810 | int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job) |
| 811 | { |
| 812 | struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| 813 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 814 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 815 | struct scsi_qla_host *ha = to_qla_host(host); |
| 816 | |
| 817 | switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) { |
| 818 | case QLISCSI_VND_READ_FLASH: |
| 819 | return qla4xxx_read_flash(bsg_job); |
| 820 | |
| 821 | case QLISCSI_VND_UPDATE_FLASH: |
| 822 | return qla4xxx_update_flash(bsg_job); |
| 823 | |
Harish Zunjarrao | 8b0402e | 2011-08-01 03:26:15 -0700 | [diff] [blame] | 824 | case QLISCSI_VND_GET_ACB_STATE: |
| 825 | return qla4xxx_get_acb_state(bsg_job); |
| 826 | |
Harish Zunjarrao | 7c07d13 | 2011-08-01 03:26:16 -0700 | [diff] [blame] | 827 | case QLISCSI_VND_READ_NVRAM: |
| 828 | return qla4xxx_read_nvram(bsg_job); |
| 829 | |
| 830 | case QLISCSI_VND_UPDATE_NVRAM: |
| 831 | return qla4xxx_update_nvram(bsg_job); |
| 832 | |
Harish Zunjarrao | 5232f80 | 2011-08-12 02:51:26 -0700 | [diff] [blame] | 833 | case QLISCSI_VND_RESTORE_DEFAULTS: |
| 834 | return qla4xxx_restore_defaults(bsg_job); |
| 835 | |
Harish Zunjarrao | 6085491 | 2011-08-12 02:51:27 -0700 | [diff] [blame] | 836 | case QLISCSI_VND_GET_ACB: |
| 837 | return qla4xxx_bsg_get_acb(bsg_job); |
| 838 | |
Vikas Chaudhary | df86f77 | 2013-11-22 05:28:17 -0500 | [diff] [blame] | 839 | case QLISCSI_VND_DIAG_TEST: |
| 840 | return qla4xxx_execute_diag_test(bsg_job); |
| 841 | |
Vikas Chaudhary | a355943 | 2011-07-25 13:48:51 -0500 | [diff] [blame] | 842 | default: |
| 843 | ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: " |
| 844 | "0x%x\n", __func__, bsg_req->msgcode); |
| 845 | bsg_reply->result = (DID_ERROR << 16); |
| 846 | bsg_reply->reply_payload_rcv_len = 0; |
| 847 | bsg_job_done(bsg_job, bsg_reply->result, |
| 848 | bsg_reply->reply_payload_rcv_len); |
| 849 | return -ENOSYS; |
| 850 | } |
| 851 | } |
| 852 | |
| 853 | /** |
| 854 | * qla4xxx_bsg_request - handle bsg request from ISCSI transport |
| 855 | * @job: iscsi_bsg_job to handle |
| 856 | */ |
| 857 | int qla4xxx_bsg_request(struct bsg_job *bsg_job) |
| 858 | { |
| 859 | struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| 860 | struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| 861 | struct scsi_qla_host *ha = to_qla_host(host); |
| 862 | |
| 863 | switch (bsg_req->msgcode) { |
| 864 | case ISCSI_BSG_HST_VENDOR: |
| 865 | return qla4xxx_process_vendor_specific(bsg_job); |
| 866 | |
| 867 | default: |
| 868 | ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n", |
| 869 | __func__, bsg_req->msgcode); |
| 870 | } |
| 871 | |
| 872 | return -ENOSYS; |
| 873 | } |