blob: 5a794cb503ea77eadf3ed7dc3330872fd5fe9973 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Header for MultiMediaCard (MMC)
3 *
4 * Copyright 2002 Hewlett-Packard Company
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Many thanks to Alessandro Rubini and Jonathan Corbet!
15 *
16 * Based strongly on code by:
17 *
18 * Author: Yong-iL Joh <tolkien@mizi.com>
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 *
20 * Author: Andrew Christian
21 * 15 May 2002
22 */
23
Robert P. J. Day100e9182011-05-27 16:04:03 -040024#ifndef LINUX_MMC_MMC_H
25#define LINUX_MMC_MMC_H
Linus Torvalds1da177e2005-04-16 15:20:36 -070026
Philip Langdalebce40a32006-10-21 12:35:02 +020027/* Standard MMC commands (4.1) type argument response */
Linus Torvalds1da177e2005-04-16 15:20:36 -070028 /* class 1 */
David Brownell97018582007-08-08 09:09:01 -070029#define MMC_GO_IDLE_STATE 0 /* bc */
Linus Torvalds1da177e2005-04-16 15:20:36 -070030#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
31#define MMC_ALL_SEND_CID 2 /* bcr R2 */
32#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
33#define MMC_SET_DSR 4 /* bc [31:16] RCA */
Jarkko Lavinenb1ebe382009-09-22 16:44:34 -070034#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
Philip Langdalebce40a32006-10-21 12:35:02 +020035#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
Linus Torvalds1da177e2005-04-16 15:20:36 -070036#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
Philip Langdalebce40a32006-10-21 12:35:02 +020037#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070038#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
39#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
40#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
41#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
David Brownell97018582007-08-08 09:09:01 -070042#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
Aries Lee22113ef2010-12-15 08:14:24 +010043#define MMC_BUS_TEST_R 14 /* adtc R1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070044#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
Aries Lee22113ef2010-12-15 08:14:24 +010045#define MMC_BUS_TEST_W 19 /* adtc R1 */
David Brownell97018582007-08-08 09:09:01 -070046#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
47#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070048
49 /* class 2 */
50#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
51#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
52#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
Arindam Nathb513ea22011-05-05 12:19:04 +053053#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070054
55 /* class 3 */
56#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
57
58 /* class 4 */
59#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
60#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
61#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
62#define MMC_PROGRAM_CID 26 /* adtc R1 */
63#define MMC_PROGRAM_CSD 27 /* adtc R1 */
64
65 /* class 6 */
66#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
67#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
68#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
69
70 /* class 5 */
71#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
72#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
Pierre Ossman24117de2005-11-28 21:00:29 +000073#define MMC_ERASE 38 /* ac R1b */
Linus Torvalds1da177e2005-04-16 15:20:36 -070074
75 /* class 9 */
76#define MMC_FAST_IO 39 /* ac <Complex> R4 */
77#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
78
79 /* class 7 */
80#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
81
82 /* class 8 */
83#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
Pierre Ossman24117de2005-11-28 21:00:29 +000084#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070085
Andrei Warkentind0c97cf2011-05-23 15:06:36 -050086static inline bool mmc_op_multi(u32 opcode)
87{
88 return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
89 opcode == MMC_READ_MULTIPLE_BLOCK;
90}
91
Linus Torvalds1da177e2005-04-16 15:20:36 -070092/*
Philip Langdalebce40a32006-10-21 12:35:02 +020093 * MMC_SWITCH argument format:
94 *
95 * [31:26] Always 0
96 * [25:24] Access Mode
97 * [23:16] Location of target Byte in EXT_CSD
98 * [15:08] Value Byte
99 * [07:03] Always 0
100 * [02:00] Command Set
101 */
102
103/*
David Brownell97018582007-08-08 09:09:01 -0700104 MMC status in R1, for native mode (SPI bits are different)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 Type
David Brownell97018582007-08-08 09:09:01 -0700106 e : error bit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 s : status bit
108 r : detected and set for the actual command response
109 x : detected and set during command execution. the host must poll
110 the card by sending status command in order to read these bits.
111 Clear condition
David Brownell97018582007-08-08 09:09:01 -0700112 a : according to the card state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 b : always related to the previous command. Reception of
114 a valid command will clear it (with a delay of one command)
115 c : clear by read
116 */
117
118#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
119#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
120#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
121#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
122#define R1_ERASE_PARAM (1 << 27) /* ex, c */
123#define R1_WP_VIOLATION (1 << 26) /* erx, c */
124#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
125#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
126#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
127#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
128#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
129#define R1_CC_ERROR (1 << 20) /* erx, c */
130#define R1_ERROR (1 << 19) /* erx, c */
131#define R1_UNDERRUN (1 << 18) /* ex, c */
132#define R1_OVERRUN (1 << 17) /* ex, c */
133#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
134#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
135#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
136#define R1_ERASE_RESET (1 << 13) /* sr, c */
137#define R1_STATUS(x) (x & 0xFFFFE000)
David Brownell97018582007-08-08 09:09:01 -0700138#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
Adrian Hunteref0b27d2009-09-22 16:44:37 -0700140#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141#define R1_APP_CMD (1 << 5) /* sr, c */
142
Russell King - ARM Linux0a2d4042011-06-20 20:10:08 +0100143#define R1_STATE_IDLE 0
144#define R1_STATE_READY 1
145#define R1_STATE_IDENT 2
146#define R1_STATE_STBY 3
147#define R1_STATE_TRAN 4
148#define R1_STATE_DATA 5
149#define R1_STATE_RCV 6
150#define R1_STATE_PRG 7
151#define R1_STATE_DIS 8
152
David Brownell97018582007-08-08 09:09:01 -0700153/*
154 * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
155 * R1 is the low order byte; R2 is the next highest byte, when present.
156 */
157#define R1_SPI_IDLE (1 << 0)
158#define R1_SPI_ERASE_RESET (1 << 1)
159#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
160#define R1_SPI_COM_CRC (1 << 3)
161#define R1_SPI_ERASE_SEQ (1 << 4)
162#define R1_SPI_ADDRESS (1 << 5)
163#define R1_SPI_PARAMETER (1 << 6)
164/* R1 bit 7 is always zero */
165#define R2_SPI_CARD_LOCKED (1 << 8)
166#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
167#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
168#define R2_SPI_ERROR (1 << 10)
169#define R2_SPI_CC_ERROR (1 << 11)
170#define R2_SPI_CARD_ECC_ERROR (1 << 12)
171#define R2_SPI_WP_VIOLATION (1 << 13)
172#define R2_SPI_ERASE_PARAM (1 << 14)
173#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
174#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
175
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176/* These are unpacked versions of the actual responses */
177
178struct _mmc_csd {
179 u8 csd_structure;
180 u8 spec_vers;
181 u8 taac;
182 u8 nsac;
183 u8 tran_speed;
184 u16 ccc;
185 u8 read_bl_len;
186 u8 read_bl_partial;
187 u8 write_blk_misalign;
188 u8 read_blk_misalign;
189 u8 dsr_imp;
190 u16 c_size;
191 u8 vdd_r_curr_min;
192 u8 vdd_r_curr_max;
193 u8 vdd_w_curr_min;
194 u8 vdd_w_curr_max;
195 u8 c_size_mult;
196 union {
197 struct { /* MMC system specification version 3.1 */
198 u8 erase_grp_size;
199 u8 erase_grp_mult;
200 } v31;
201 struct { /* MMC system specification version 2.2 */
202 u8 sector_size;
203 u8 erase_grp_size;
204 } v22;
205 } erase;
206 u8 wp_grp_size;
207 u8 wp_grp_enable;
208 u8 default_ecc;
209 u8 r2w_factor;
210 u8 write_bl_len;
211 u8 write_bl_partial;
212 u8 file_format_grp;
213 u8 copy;
214 u8 perm_write_protect;
215 u8 tmp_write_protect;
216 u8 file_format;
217 u8 ecc;
218};
219
Pierre Ossmanf74d1322007-02-09 22:49:31 +0100220/*
221 * OCR bits are mostly in host.h
222 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
224
Pierre Ossman912490d2005-05-21 10:27:02 +0100225/*
226 * Card Command Classes (CCC)
227 */
228#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
229 /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
David Brownell97018582007-08-08 09:09:01 -0700230 /* (and for SPI, CMD58,59) */
Pierre Ossman912490d2005-05-21 10:27:02 +0100231#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
232 /* (CMD11) */
233#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
234 /* (CMD16,17,18) */
235#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
236 /* (CMD20) */
237#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
238 /* (CMD16,24,25,26,27) */
239#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
240 /* (CMD32,33,34,35,36,37,38,39) */
241#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
242 /* (CMD28,29,30) */
243#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
244 /* (CMD16,CMD42) */
245#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
246 /* (CMD55,56,57,ACMD*) */
247#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
248 /* (CMD5,39,40,52,53) */
249#define CCC_SWITCH (1<<10) /* (10) High speed switch */
250 /* (CMD6,34,35,36,37,50) */
251 /* (11) Reserved */
252 /* (CMD?) */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253
254/*
255 * CSD field definitions
256 */
257
258#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
259#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
Philip Langdalebce40a32006-10-21 12:35:02 +0200260#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
261#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262
263#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
264#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
265#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
Philip Langdalebce40a32006-10-21 12:35:02 +0200266#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */
267#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268
Philip Langdalebce40a32006-10-21 12:35:02 +0200269/*
270 * EXT_CSD fields
271 */
272
Chuanxiao Dong709de992011-01-22 04:09:41 +0800273#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
274#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
Andrei Warkentinf4c55222011-03-31 18:40:00 -0500275#define EXT_CSD_WR_REL_PARAM 166 /* RO */
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700276#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
Andrei Warkentin371a6892011-04-11 18:10:25 -0500277#define EXT_CSD_PART_CONFIG 179 /* R/W */
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700278#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
279#define EXT_CSD_BUS_WIDTH 183 /* R/W */
280#define EXT_CSD_HS_TIMING 185 /* R/W */
281#define EXT_CSD_REV 192 /* RO */
282#define EXT_CSD_STRUCTURE 194 /* RO */
283#define EXT_CSD_CARD_TYPE 196 /* RO */
Andrei Warkentin371a6892011-04-11 18:10:25 -0500284#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700285#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
286#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
Andrei Warkentinf4c55222011-03-31 18:40:00 -0500287#define EXT_CSD_REL_WR_SEC_C 222 /* RO */
Chuanxiao Dong709de992011-01-22 04:09:41 +0800288#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700289#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
290#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
Andrei Warkentin371a6892011-04-11 18:10:25 -0500291#define EXT_CSD_BOOT_MULT 226 /* RO */
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700292#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
293#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
294#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
295#define EXT_CSD_TRIM_MULT 232 /* RO */
Philip Langdalebce40a32006-10-21 12:35:02 +0200296
297/*
298 * EXT_CSD field definitions
299 */
300
Andrei Warkentinf4c55222011-03-31 18:40:00 -0500301#define EXT_CSD_WR_REL_PARAM_EN (1<<2)
302
Andrei Warkentin371a6892011-04-11 18:10:25 -0500303#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
304#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
305#define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x2)
306
Philip Langdalebce40a32006-10-21 12:35:02 +0200307#define EXT_CSD_CMD_SET_NORMAL (1<<0)
308#define EXT_CSD_CMD_SET_SECURE (1<<1)
309#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
310
311#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
312#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
Hanumath Prasaddfc13e82010-09-30 17:37:23 -0400313#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */
314#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
315 /* DDR mode @1.8V or 3V I/O */
316#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
317 /* DDR mode @1.2V I/O */
318#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
319 | EXT_CSD_CARD_TYPE_DDR_1_2V)
Philip Langdalebce40a32006-10-21 12:35:02 +0200320
Philip Langdalee45a1bd2006-10-29 10:14:19 +0100321#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
322#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
323#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
Hanumath Prasaddfc13e82010-09-30 17:37:23 -0400324#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
325#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
Philip Langdalee45a1bd2006-10-29 10:14:19 +0100326
Adrian Hunterdfe86cb2010-08-11 14:17:46 -0700327#define EXT_CSD_SEC_ER_EN BIT(0)
328#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
329#define EXT_CSD_SEC_GB_CL_EN BIT(4)
330
Philip Langdalebce40a32006-10-21 12:35:02 +0200331/*
332 * MMC_SWITCH access modes
333 */
334
335#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
336#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
337#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
338#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
Pierre Ossmanf2182782005-09-06 15:18:55 -0700339
Robert P. J. Day100e9182011-05-27 16:04:03 -0400340#endif /* LINUX_MMC_MMC_H */